1 files changed, 68 insertions, 210 deletions

diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index a17c672..b1ec62f 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -403,13 +403,9 @@ static int gpr_set(struct task_struct *target, const struct user_regset *regset,
 }
 
 /*
- * When the transaction is active, 'transact_fp' holds the current running
- * value of all FPR registers and 'fp_state' holds the last checkpointed
- * value of all FPR registers for the current transaction. When transaction
- * is not active 'fp_state' holds the current running state of all the FPR
- * registers. So this function which returns the current running values of
- * all the FPR registers, needs to know whether any transaction is active
- * or not.
+ * Regardless of transactions, 'fp_state' holds the current running
+ * value of all FPR registers and 'ckfp_state' holds the last checkpointed
+ * value of all FPR registers for the current transaction.
  *
  * Userspace interface buffer layout:
  *
@@ -417,13 +413,6 @@ static int gpr_set(struct task_struct *target, const struct user_regset *regset,
  *	u64	fpr[32];
  *	u64	fpscr;
  * };
- *
- * There are two config options CONFIG_VSX and CONFIG_PPC_TRANSACTIONAL_MEM
- * which determines the final code in this function. All the combinations of
- * these two config options are possible except the one below as transactional
- * memory config pulls in CONFIG_VSX automatically.
- *
- *	!defined(CONFIG_VSX) && defined(CONFIG_PPC_TRANSACTIONAL_MEM)
  */
 static int fpr_get(struct task_struct *target, const struct user_regset *regset,
 		   unsigned int pos, unsigned int count,
@@ -432,50 +421,29 @@ static int fpr_get(struct task_struct *target, const struct user_regset *regset,
 #ifdef CONFIG_VSX
 	u64 buf[33];
 	int i;
-#endif
-	flush_fp_to_thread(target);
 
-#if defined(CONFIG_VSX) && defined(CONFIG_PPC_TRANSACTIONAL_MEM)
-	/* copy to local buffer then write that out */
-	if (MSR_TM_ACTIVE(target->thread.regs->msr)) {
-		flush_altivec_to_thread(target);
-		flush_tmregs_to_thread(target);
-		for (i = 0; i < 32 ; i++)
-			buf[i] = target->thread.TS_TRANS_FPR(i);
-		buf[32] = target->thread.transact_fp.fpscr;
-	} else {
-		for (i = 0; i < 32 ; i++)
-			buf[i] = target->thread.TS_FPR(i);
-		buf[32] = target->thread.fp_state.fpscr;
-	}
-	return user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
-#endif
+	flush_fp_to_thread(target);
 
-#if defined(CONFIG_VSX) && !defined(CONFIG_PPC_TRANSACTIONAL_MEM)
 	/* copy to local buffer then write that out */
 	for (i = 0; i < 32 ; i++)
 		buf[i] = target->thread.TS_FPR(i);
 	buf[32] = target->thread.fp_state.fpscr;
 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
-#endif
-
-#if !defined(CONFIG_VSX) && !defined(CONFIG_PPC_TRANSACTIONAL_MEM)
+#else
 	BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
 		     offsetof(struct thread_fp_state, fpr[32]));
 
+	flush_fp_to_thread(target);
+
 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				   &target->thread.fp_state, 0, -1);
 #endif
 }
 
 /*
- * When the transaction is active, 'transact_fp' holds the current running
- * value of all FPR registers and 'fp_state' holds the last checkpointed
- * value of all FPR registers for the current transaction. When transaction
- * is not active 'fp_state' holds the current running state of all the FPR
- * registers. So this function which setss the current running values of
- * all the FPR registers, needs to know whether any transaction is active
- * or not.
+ * Regardless of transactions, 'fp_state' holds the current running
+ * value of all FPR registers and 'ckfp_state' holds the last checkpointed
+ * value of all FPR registers for the current transaction.
  *
  * Userspace interface buffer layout:
  *
@@ -484,12 +452,6 @@ static int fpr_get(struct task_struct *target, const struct user_regset *regset,
  *	u64	fpscr;
  * };
  *
- * There are two config options CONFIG_VSX and CONFIG_PPC_TRANSACTIONAL_MEM
- * which determines the final code in this function. All the combinations of
- * these two config options are possible except the one below as transactional
- * memory config pulls in CONFIG_VSX automatically.
- *
- *	!defined(CONFIG_VSX) && defined(CONFIG_PPC_TRANSACTIONAL_MEM)
  */
 static int fpr_set(struct task_struct *target, const struct user_regset *regset,
 		   unsigned int pos, unsigned int count,
@@ -498,44 +460,24 @@ static int fpr_set(struct task_struct *target, const struct user_regset *regset,
 #ifdef CONFIG_VSX
 	u64 buf[33];
 	int i;
-#endif
+
 	flush_fp_to_thread(target);
 
-#if defined(CONFIG_VSX) && defined(CONFIG_PPC_TRANSACTIONAL_MEM)
 	/* copy to local buffer then write that out */
 	i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
 	if (i)
 		return i;
 
-	if (MSR_TM_ACTIVE(target->thread.regs->msr)) {
-		flush_altivec_to_thread(target);
-		flush_tmregs_to_thread(target);
-		for (i = 0; i < 32 ; i++)
-			target->thread.TS_TRANS_FPR(i) = buf[i];
-		target->thread.transact_fp.fpscr = buf[32];
-	} else {
-		for (i = 0; i < 32 ; i++)
-			target->thread.TS_FPR(i) = buf[i];
-		target->thread.fp_state.fpscr = buf[32];
-	}
-	return 0;
-#endif
-
-#if defined(CONFIG_VSX) && !defined(CONFIG_PPC_TRANSACTIONAL_MEM)
-	/* copy to local buffer then write that out */
-	i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
-	if (i)
-		return i;
 	for (i = 0; i < 32 ; i++)
 		target->thread.TS_FPR(i) = buf[i];
 	target->thread.fp_state.fpscr = buf[32];
 	return 0;
-#endif
-
-#if !defined(CONFIG_VSX) && !defined(CONFIG_PPC_TRANSACTIONAL_MEM)
+#else
 	BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
 		     offsetof(struct thread_fp_state, fpr[32]));
 
+	flush_fp_to_thread(target);
+
 	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				  &target->thread.fp_state, 0, -1);
 #endif
@@ -563,13 +505,10 @@ static int vr_active(struct task_struct *target,
 }
 
 /*
- * When the transaction is active, 'transact_vr' holds the current running
- * value of all the VMX registers and 'vr_state' holds the last checkpointed
- * value of all the VMX registers for the current transaction to fall back
- * on in case it aborts. When transaction is not active 'vr_state' holds
- * the current running state of all the VMX registers. So this function which
- * gets the current running values of all the VMX registers, needs to know
- * whether any transaction is active or not.
+ * Regardless of transactions, 'vr_state' holds the current running
+ * value of all the VMX registers and 'ckvr_state' holds the last
+ * checkpointed value of all the VMX registers for the current
+ * transaction to fall back on in case it aborts.
  *
  * Userspace interface buffer layout:
  *
@@ -583,7 +522,6 @@ static int vr_get(struct task_struct *target, const struct user_regset *regset,
 		  unsigned int pos, unsigned int count,
 		  void *kbuf, void __user *ubuf)
 {
-	struct thread_vr_state *addr;
 	int ret;
 
 	flush_altivec_to_thread(target);
@@ -591,19 +529,8 @@ static int vr_get(struct task_struct *target, const struct user_regset *regset,
 	BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
 		     offsetof(struct thread_vr_state, vr[32]));
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	if (MSR_TM_ACTIVE(target->thread.regs->msr)) {
-		flush_fp_to_thread(target);
-		flush_tmregs_to_thread(target);
-		addr = &target->thread.transact_vr;
-	} else {
-		addr = &target->thread.vr_state;
-	}
-#else
-	addr = &target->thread.vr_state;
-#endif
 	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				  addr, 0,
+				  &target->thread.vr_state, 0,
 				  33 * sizeof(vector128));
 	if (!ret) {
 		/*
@@ -615,14 +542,7 @@ static int vr_get(struct task_struct *target, const struct user_regset *regset,
 		} vrsave;
 		memset(&vrsave, 0, sizeof(vrsave));
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-		if (MSR_TM_ACTIVE(target->thread.regs->msr))
-			vrsave.word = target->thread.transact_vrsave;
-		else
-			vrsave.word = target->thread.vrsave;
-#else
 		vrsave.word = target->thread.vrsave;
-#endif
 
 		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &vrsave,
 					  33 * sizeof(vector128), -1);
@@ -632,13 +552,10 @@ static int vr_get(struct task_struct *target, const struct user_regset *regset,
 }
 
 /*
- * When the transaction is active, 'transact_vr' holds the current running
- * value of all the VMX registers and 'vr_state' holds the last checkpointed
- * value of all the VMX registers for the current transaction to fall back
- * on in case it aborts. When transaction is not active 'vr_state' holds
- * the current running state of all the VMX registers. So this function which
- * sets the current running values of all the VMX registers, needs to know
- * whether any transaction is active or not.
+ * Regardless of transactions, 'vr_state' holds the current running
+ * value of all the VMX registers and 'ckvr_state' holds the last
+ * checkpointed value of all the VMX registers for the current
+ * transaction to fall back on in case it aborts.
  *
  * Userspace interface buffer layout:
  *
@@ -652,7 +569,6 @@ static int vr_set(struct task_struct *target, const struct user_regset *regset,
 		  unsigned int pos, unsigned int count,
 		  const void *kbuf, const void __user *ubuf)
 {
-	struct thread_vr_state *addr;
 	int ret;
 
 	flush_altivec_to_thread(target);
@@ -660,19 +576,8 @@ static int vr_set(struct task_struct *target, const struct user_regset *regset,
 	BUILD_BUG_ON(offsetof(struct thread_vr_state, vscr) !=
 		     offsetof(struct thread_vr_state, vr[32]));
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	if (MSR_TM_ACTIVE(target->thread.regs->msr)) {
-		flush_fp_to_thread(target);
-		flush_tmregs_to_thread(target);
-		addr = &target->thread.transact_vr;
-	} else {
-		addr = &target->thread.vr_state;
-	}
-#else
-	addr = &target->thread.vr_state;
-#endif
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 addr, 0,
+				 &target->thread.vr_state, 0,
 				 33 * sizeof(vector128));
 	if (!ret && count > 0) {
 		/*
@@ -684,27 +589,12 @@ static int vr_set(struct task_struct *target, const struct user_regset *regset,
 		} vrsave;
 		memset(&vrsave, 0, sizeof(vrsave));
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-		if (MSR_TM_ACTIVE(target->thread.regs->msr))
-			vrsave.word = target->thread.transact_vrsave;
-		else
-			vrsave.word = target->thread.vrsave;
-#else
 		vrsave.word = target->thread.vrsave;
-#endif
+
 		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &vrsave,
 					 33 * sizeof(vector128), -1);
-		if (!ret) {
-
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-			if (MSR_TM_ACTIVE(target->thread.regs->msr))
-				target->thread.transact_vrsave = vrsave.word;
-			else
-				target->thread.vrsave = vrsave.word;
-#else
+		if (!ret)
 			target->thread.vrsave = vrsave.word;
-#endif
-		}
 	}
 
 	return ret;
@@ -726,13 +616,10 @@ static int vsr_active(struct task_struct *target,
 }
 
 /*
- * When the transaction is active, 'transact_fp' holds the current running
- * value of all FPR registers and 'fp_state' holds the last checkpointed
- * value of all FPR registers for the current transaction. When transaction
- * is not active 'fp_state' holds the current running state of all the FPR
- * registers. So this function which returns the current running values of
- * all the FPR registers, needs to know whether any transaction is active
- * or not.
+ * Regardless of transactions, 'fp_state' holds the current running
+ * value of all FPR registers and 'ckfp_state' holds the last
+ * checkpointed value of all FPR registers for the current
+ * transaction.
  *
  * Userspace interface buffer layout:
  *
@@ -747,27 +634,14 @@ static int vsr_get(struct task_struct *target, const struct user_regset *regset,
 	u64 buf[32];
 	int ret, i;
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	flush_tmregs_to_thread(target);
 	flush_fp_to_thread(target);
 	flush_altivec_to_thread(target);
-	flush_tmregs_to_thread(target);
-#endif
 	flush_vsx_to_thread(target);
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	if (MSR_TM_ACTIVE(target->thread.regs->msr)) {
-		for (i = 0; i < 32 ; i++)
-			buf[i] = target->thread.
-				transact_fp.fpr[i][TS_VSRLOWOFFSET];
-	} else {
-		for (i = 0; i < 32 ; i++)
-			buf[i] = target->thread.
-				fp_state.fpr[i][TS_VSRLOWOFFSET];
-	}
-#else
 	for (i = 0; i < 32 ; i++)
 		buf[i] = target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET];
-#endif
+
 	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				  buf, 0, 32 * sizeof(double));
 
@@ -775,12 +649,10 @@ static int vsr_get(struct task_struct *target, const struct user_regset *regset,
 }
 
 /*
- * When the transaction is active, 'transact_fp' holds the current running
- * value of all FPR registers and 'fp_state' holds the last checkpointed
- * value of all FPR registers for the current transaction. When transaction
- * is not active 'fp_state' holds the current running state of all the FPR
- * registers. So this function which sets the current running values of all
- * the FPR registers, needs to know whether any transaction is active or not.
+ * Regardless of transactions, 'fp_state' holds the current running
+ * value of all FPR registers and 'ckfp_state' holds the last
+ * checkpointed value of all FPR registers for the current
+ * transaction.
  *
  * Userspace interface buffer layout:
  *
@@ -795,31 +667,16 @@ static int vsr_set(struct task_struct *target, const struct user_regset *regset,
 	u64 buf[32];
 	int ret,i;
 
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	flush_tmregs_to_thread(target);
 	flush_fp_to_thread(target);
 	flush_altivec_to_thread(target);
-	flush_tmregs_to_thread(target);
-#endif
 	flush_vsx_to_thread(target);
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 buf, 0, 32 * sizeof(double));
-
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-	if (MSR_TM_ACTIVE(target->thread.regs->msr)) {
-		for (i = 0; i < 32 ; i++)
-			target->thread.transact_fp.
-				fpr[i][TS_VSRLOWOFFSET] = buf[i];
-	} else {
+	if (!ret)
 		for (i = 0; i < 32 ; i++)
-			target->thread.fp_state.
-				fpr[i][TS_VSRLOWOFFSET] = buf[i];
-	}
-#else
-	for (i = 0; i < 32 ; i++)
-		target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
-#endif
-
+			target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
 
 	return ret;
 }
@@ -945,9 +802,9 @@ static int tm_cgpr_get(struct task_struct *target,
 	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
 		return -ENODATA;
 
+	flush_tmregs_to_thread(target);
 	flush_fp_to_thread(target);
 	flush_altivec_to_thread(target);
-	flush_tmregs_to_thread(target);
 
 	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				  &target->thread.ckpt_regs,
@@ -1010,9 +867,9 @@ static int tm_cgpr_set(struct task_struct *target,
 	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
 		return -ENODATA;
 
+	flush_tmregs_to_thread(target);
 	flush_fp_to_thread(target);
 	flush_altivec_to_thread(target);
-	flush_tmregs_to_thread(target);
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 &target->thread.ckpt_regs,
@@ -1088,7 +945,7 @@ static int tm_cfpr_active(struct task_struct *target,
  *
  * This function gets in transaction checkpointed FPR registers.
  *
- * When the transaction is active 'fp_state' holds the checkpointed
+ * When the transaction is active 'ckfp_state' holds the checkpointed
  * values for the current transaction to fall back on if it aborts
  * in between. This function gets those checkpointed FPR registers.
  * The userspace interface buffer layout is as follows.
@@ -1112,14 +969,14 @@ static int tm_cfpr_get(struct task_struct *target,
 	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
 		return -ENODATA;
 
+	flush_tmregs_to_thread(target);
 	flush_fp_to_thread(target);
 	flush_altivec_to_thread(target);
-	flush_tmregs_to_thread(target);
 
 	/* copy to local buffer then write that out */
 	for (i = 0; i < 32 ; i++)
-		buf[i] = target->thread.TS_FPR(i);
-	buf[32] = target->thread.fp_state.fpscr;
+		buf[i] = target->thread.TS_CKFPR(i);
+	buf[32] = target->thread.ckfp_state.fpscr;
 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
 }
 
@@ -1134,7 +991,7 @@ static int tm_cfpr_get(struct task_struct *target,
  *
  * This function sets in transaction checkpointed FPR registers.
  *
- * When the transaction is active 'fp_state' holds the checkpointed
+ * When the transaction is active 'ckfp_state' holds the checkpointed
  * FPR register values for the current transaction to fall back on
  * if it aborts in between. This function sets these checkpointed
  * FPR registers. The userspace interface buffer layout is as follows.
@@ -1158,17 +1015,17 @@ static int tm_cfpr_set(struct task_struct *target,
 	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
 		return -ENODATA;
 
+	flush_tmregs_to_thread(target);
 	flush_fp_to_thread(target);
 	flush_altivec_to_thread(target);
-	flush_tmregs_to_thread(target);
 
 	/* copy to local buffer then write that out */
 	i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
 	if (i)
 		return i;
 	for (i = 0; i < 32 ; i++)
-		target->thread.TS_FPR(i) = buf[i];
-	target->thread.fp_state.fpscr = buf[32];
+		target->thread.TS_CKFPR(i) = buf[i];
+	target->thread.ckfp_state.fpscr = buf[32];
 	return 0;
 }
 
@@ -1203,7 +1060,7 @@ static int tm_cvmx_active(struct task_struct *target,
  *
  * This function gets in transaction checkpointed VMX registers.
  *
- * When the transaction is active 'vr_state' and 'vr_save' hold
+ * When the transaction is active 'ckvr_state' and 'ckvrsave' hold
  * the checkpointed values for the current transaction to fall
  * back on if it aborts in between. The userspace interface buffer
  * layout is as follows.
@@ -1230,12 +1087,12 @@ static int tm_cvmx_get(struct task_struct *target,
 		return -ENODATA;
 
 	/* Flush the state */
+	flush_tmregs_to_thread(target);
 	flush_fp_to_thread(target);
 	flush_altivec_to_thread(target);
-	flush_tmregs_to_thread(target);
 
 	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-					&target->thread.vr_state, 0,
+					&target->thread.ckvr_state, 0,
 					33 * sizeof(vector128));
 	if (!ret) {
 		/*
@@ -1246,7 +1103,7 @@ static int tm_cvmx_get(struct task_struct *target,
 			u32 word;
 		} vrsave;
 		memset(&vrsave, 0, sizeof(vrsave));
-		vrsave.word = target->thread.vrsave;
+		vrsave.word = target->thread.ckvrsave;
 		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &vrsave,
 						33 * sizeof(vector128), -1);
 	}
@@ -1265,7 +1122,7 @@ static int tm_cvmx_get(struct task_struct *target,
  *
  * This function sets in transaction checkpointed VMX registers.
  *
- * When the transaction is active 'vr_state' and 'vr_save' hold
+ * When the transaction is active 'ckvr_state' and 'ckvrsave' hold
  * the checkpointed values for the current transaction to fall
  * back on if it aborts in between. The userspace interface buffer
  * layout is as follows.
@@ -1291,12 +1148,12 @@ static int tm_cvmx_set(struct task_struct *target,
 	if (!MSR_TM_ACTIVE(target->thread.regs->msr))
 		return -ENODATA;
 
+	flush_tmregs_to_thread(target);
 	flush_fp_to_thread(target);
 	flush_altivec_to_thread(target);
-	flush_tmregs_to_thread(target);
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-					&target->thread.vr_state, 0,
+					&target->thread.ckvr_state, 0,
 					33 * sizeof(vector128));
 	if (!ret && count > 0) {
 		/*
@@ -1307,11 +1164,11 @@ static int tm_cvmx_set(struct task_struct *target,
 			u32 word;
 		} vrsave;
 		memset(&vrsave, 0, sizeof(vrsave));
-		vrsave.word = target->thread.vrsave;
+		vrsave.word = target->thread.ckvrsave;
 		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &vrsave,
 						33 * sizeof(vector128), -1);
 		if (!ret)
-			target->thread.vrsave = vrsave.word;
+			target->thread.ckvrsave = vrsave.word;
 	}
 
 	return ret;
@@ -1349,7 +1206,7 @@ static int tm_cvsx_active(struct task_struct *target,
  *
  * This function gets in transaction checkpointed VSX registers.
  *
- * When the transaction is active 'fp_state' holds the checkpointed
+ * When the transaction is active 'ckfp_state' holds the checkpointed
  * values for the current transaction to fall back on if it aborts
  * in between. This function gets those checkpointed VSX registers.
  * The userspace interface buffer layout is as follows.
@@ -1373,13 +1230,13 @@ static int tm_cvsx_get(struct task_struct *target,
 		return -ENODATA;
 
 	/* Flush the state */
+	flush_tmregs_to_thread(target);
 	flush_fp_to_thread(target);
 	flush_altivec_to_thread(target);
-	flush_tmregs_to_thread(target);
 	flush_vsx_to_thread(target);
 
 	for (i = 0; i < 32 ; i++)
-		buf[i] = target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET];
+		buf[i] = target->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET];
 	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				  buf, 0, 32 * sizeof(double));
 
@@ -1397,7 +1254,7 @@ static int tm_cvsx_get(struct task_struct *target,
  *
  * This function sets in transaction checkpointed VSX registers.
  *
- * When the transaction is active 'fp_state' holds the checkpointed
+ * When the transaction is active 'ckfp_state' holds the checkpointed
  * VSX register values for the current transaction to fall back on
  * if it aborts in between. This function sets these checkpointed
  * FPR registers. The userspace interface buffer layout is as follows.
@@ -1421,15 +1278,16 @@ static int tm_cvsx_set(struct task_struct *target,
 		return -ENODATA;
 
 	/* Flush the state */
+	flush_tmregs_to_thread(target);
 	flush_fp_to_thread(target);
 	flush_altivec_to_thread(target);
-	flush_tmregs_to_thread(target);
 	flush_vsx_to_thread(target);
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 buf, 0, 32 * sizeof(double));
-	for (i = 0; i < 32 ; i++)
-		target->thread.fp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+	if (!ret)
+		for (i = 0; i < 32 ; i++)
+			target->thread.ckfp_state.fpr[i][TS_VSRLOWOFFSET] = buf[i];
 
 	return ret;
 }
@@ -1485,9 +1343,9 @@ static int tm_spr_get(struct task_struct *target,
 		return -ENODEV;
 
 	/* Flush the states */
+	flush_tmregs_to_thread(target);
 	flush_fp_to_thread(target);
 	flush_altivec_to_thread(target);
-	flush_tmregs_to_thread(target);
 
 	/* TFHAR register */
 	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
@@ -1541,9 +1399,9 @@ static int tm_spr_set(struct task_struct *target,
 		return -ENODEV;
 
 	/* Flush the states */
+	flush_tmregs_to_thread(target);
 	flush_fp_to_thread(target);
 	flush_altivec_to_thread(target);
-	flush_tmregs_to_thread(target);
 
 	/* TFHAR register */
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,