diff options
Diffstat (limited to 'arch/powerpc/kernel/idle_book3s.S')
| -rw-r--r-- | arch/powerpc/kernel/idle_book3s.S | 201 |
1 files changed, 99 insertions, 102 deletions
diff --git a/arch/powerpc/kernel/idle_book3s.S b/arch/powerpc/kernel/idle_book3s.S index 4898d67..516ebef 100644 --- a/arch/powerpc/kernel/idle_book3s.S +++ b/arch/powerpc/kernel/idle_book3s.S @@ -30,7 +30,9 @@ * Use unused space in the interrupt stack to save and restore * registers for winkle support. */ +#define _MMCR0 GPR0 #define _SDR1 GPR3 +#define _PTCR GPR3 #define _RPR GPR4 #define _SPURR GPR5 #define _PURR GPR6 @@ -39,7 +41,7 @@ #define _AMOR GPR9 #define _WORT GPR10 #define _WORC GPR11 -#define _PTCR GPR12 +#define _LPCR GPR12 #define PSSCR_EC_ESL_MASK_SHIFTED (PSSCR_EC | PSSCR_ESL) >> 16 @@ -55,12 +57,14 @@ save_sprs_to_stack: * here since any thread in the core might wake up first */ BEGIN_FTR_SECTION - mfspr r3,SPRN_PTCR - std r3,_PTCR(r1) /* * Note - SDR1 is dropped in Power ISA v3. Hence not restoring * SDR1 here */ + mfspr r3,SPRN_PTCR + std r3,_PTCR(r1) + mfspr r3,SPRN_LPCR + std r3,_LPCR(r1) FTR_SECTION_ELSE mfspr r3,SPRN_SDR1 std r3,_SDR1(r1) @@ -106,13 +110,9 @@ core_idle_lock_held: /* * Pass requested state in r3: * r3 - PNV_THREAD_NAP/SLEEP/WINKLE in POWER8 - * - Requested STOP state in POWER9 + * - Requested PSSCR value in POWER9 * - * To check IRQ_HAPPENED in r4 - * 0 - don't check - * 1 - check - * - * Address to 'rfid' to in r5 + * Address of idle handler to branch to in realmode in r4 */ pnv_powersave_common: /* Use r3 to pass state nap/sleep/winkle */ @@ -122,37 +122,14 @@ pnv_powersave_common: * need to save PC, some CR bits and the NV GPRs, * but for now an interrupt frame will do. */ + mtctr r4 + mflr r0 std r0,16(r1) stdu r1,-INT_FRAME_SIZE(r1) std r0,_LINK(r1) std r0,_NIP(r1) - /* Hard disable interrupts */ - mfmsr r9 - rldicl r9,r9,48,1 - rotldi r9,r9,16 - mtmsrd r9,1 /* hard-disable interrupts */ - - /* Check if something happened while soft-disabled */ - lbz r0,PACAIRQHAPPENED(r13) - andi. r0,r0,~PACA_IRQ_HARD_DIS@l - beq 1f - cmpwi cr0,r4,0 - beq 1f - addi r1,r1,INT_FRAME_SIZE - ld r0,16(r1) - li r3,0 /* Return 0 (no nap) */ - mtlr r0 - blr - -1: /* We mark irqs hard disabled as this is the state we'll - * be in when returning and we need to tell arch_local_irq_restore() - * about it - */ - li r0,PACA_IRQ_HARD_DIS - stb r0,PACAIRQHAPPENED(r13) - /* We haven't lost state ... yet */ li r0,0 stb r0,PACA_NAPSTATELOST(r13) @@ -160,9 +137,8 @@ pnv_powersave_common: /* Continue saving state */ SAVE_GPR(2, r1) SAVE_NVGPRS(r1) - mfcr r4 - std r4,_CCR(r1) - std r9,_MSR(r1) + mfcr r5 + std r5,_CCR(r1) std r1,PACAR1(r13) /* @@ -172,12 +148,8 @@ pnv_powersave_common: * the MMU context to the guest. */ LOAD_REG_IMMEDIATE(r7, MSR_IDLE) - li r6, MSR_RI - andc r6, r9, r6 - mtmsrd r6, 1 /* clear RI before setting SRR0/1 */ - mtspr SPRN_SRR0, r5 - mtspr SPRN_SRR1, r7 - rfid + mtmsrd r7,0 + bctr .globl pnv_enter_arch207_idle_mode pnv_enter_arch207_idle_mode: @@ -285,9 +257,30 @@ power_enter_stop: bne .Lhandle_esl_ec_set IDLE_STATE_ENTER_SEQ(PPC_STOP) li r3,0 /* Since we didn't lose state, return 0 */ + + /* + * pnv_wakeup_noloss() expects r12 to contain the SRR1 value so + * it can determine if the wakeup reason is an HMI in + * CHECK_HMI_INTERRUPT. + * + * However, when we wakeup with ESL=0, SRR1 will not contain the wakeup + * reason, so there is no point setting r12 to SRR1. + * + * Further, we clear r12 here, so that we don't accidentally enter the + * HMI in pnv_wakeup_noloss() if the value of r12[42:45] == WAKE_HMI. + */ + li r12, 0 b pnv_wakeup_noloss .Lhandle_esl_ec_set: + /* + * POWER9 DD2 can incorrectly set PMAO when waking up after a + * state-loss idle. Saving and restoring MMCR0 over idle is a + * workaround. + */ + mfspr r4,SPRN_MMCR0 + std r4,_MMCR0(r1) + /* * Check if the requested state is a deep idle state. */ @@ -319,45 +312,23 @@ lwarx_loop_stop: IDLE_STATE_ENTER_SEQ_NORET(PPC_STOP) -_GLOBAL(power7_idle) +/* + * Entered with MSR[EE]=0 and no soft-masked interrupts pending. + * r3 contains desired idle state (PNV_THREAD_NAP/SLEEP/WINKLE). + */ +_GLOBAL(power7_idle_insn) /* Now check if user or arch enabled NAP mode */ - LOAD_REG_ADDRBASE(r3,powersave_nap) - lwz r4,ADDROFF(powersave_nap)(r3) - cmpwi 0,r4,0 - beqlr - li r3, 1 - /* fall through */ - -_GLOBAL(power7_nap) - mr r4,r3 - li r3,PNV_THREAD_NAP - LOAD_REG_ADDR(r5, pnv_enter_arch207_idle_mode) + LOAD_REG_ADDR(r4, pnv_enter_arch207_idle_mode) b pnv_powersave_common - /* No return */ - -_GLOBAL(power7_sleep) - li r3,PNV_THREAD_SLEEP - li r4,1 - LOAD_REG_ADDR(r5, pnv_enter_arch207_idle_mode) - b pnv_powersave_common - /* No return */ - -_GLOBAL(power7_winkle) - li r3,PNV_THREAD_WINKLE - li r4,1 - LOAD_REG_ADDR(r5, pnv_enter_arch207_idle_mode) - b pnv_powersave_common - /* No return */ #define CHECK_HMI_INTERRUPT \ - mfspr r0,SPRN_SRR1; \ BEGIN_FTR_SECTION_NESTED(66); \ - rlwinm r0,r0,45-31,0xf; /* extract wake reason field (P8) */ \ + rlwinm r0,r12,45-31,0xf; /* extract wake reason field (P8) */ \ FTR_SECTION_ELSE_NESTED(66); \ - rlwinm r0,r0,45-31,0xe; /* P7 wake reason field is 3 bits */ \ + rlwinm r0,r12,45-31,0xe; /* P7 wake reason field is 3 bits */ \ ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_ARCH_207S, 66); \ cmpwi r0,0xa; /* Hypervisor maintenance ? */ \ - bne 20f; \ + bne+ 20f; \ /* Invoke opal call to handle hmi */ \ ld r2,PACATOC(r13); \ ld r1,PACAR1(r13); \ @@ -369,16 +340,13 @@ ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_ARCH_207S, 66); \ 20: nop; /* - * r3 - The PSSCR value corresponding to the stop state. - * r4 - The PSSCR mask corrresonding to the stop state. + * Entered with MSR[EE]=0 and no soft-masked interrupts pending. + * r3 contains desired PSSCR register value. */ _GLOBAL(power9_idle_stop) - mfspr r5,SPRN_PSSCR - andc r5,r5,r4 - or r3,r3,r5 + std r3, PACA_REQ_PSSCR(r13) mtspr SPRN_PSSCR,r3 - LOAD_REG_ADDR(r5,power_enter_stop) - li r4,1 + LOAD_REG_ADDR(r4,power_enter_stop) b pnv_powersave_common /* No return */ @@ -436,17 +404,17 @@ pnv_powersave_wakeup_mce: /* * Now put the original SRR1 with SRR1_WAKEMCE_RESVD as the wake - * reason into SRR1, which allows reuse of the system reset wakeup + * reason into r12, which allows reuse of the system reset wakeup * code without being mistaken for another type of wakeup. */ - oris r3,r3,SRR1_WAKEMCE_RESVD@h - mtspr SPRN_SRR1,r3 + oris r12,r3,SRR1_WAKEMCE_RESVD@h b pnv_powersave_wakeup /* * Called from reset vector for powersave wakeups. * cr3 - set to gt if waking up with partial/complete hypervisor state loss + * r12 - SRR1 */ .global pnv_powersave_wakeup pnv_powersave_wakeup: @@ -464,6 +432,8 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_300) li r0,PNV_THREAD_RUNNING stb r0,PACA_THREAD_IDLE_STATE(r13) /* Clear thread state */ + mr r3,r12 + #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE li r0,KVM_HWTHREAD_IN_KERNEL stb r0,HSTATE_HWTHREAD_STATE(r13) @@ -477,7 +447,6 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_300) #endif /* Return SRR1 from power7_nap() */ - mfspr r3,SPRN_SRR1 blt cr3,pnv_wakeup_noloss b pnv_wakeup_loss @@ -489,18 +458,39 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_300) */ pnv_restore_hyp_resource_arch300: /* + * Workaround for POWER9, if we lost resources, the ERAT + * might have been mixed up and needs flushing. We also need + * to reload MMCR0 (see comment above). + */ + blt cr3,1f + PPC_INVALIDATE_ERAT + ld r1,PACAR1(r13) + ld r4,_MMCR0(r1) + mtspr SPRN_MMCR0,r4 +1: + /* * POWER ISA 3. Use PSSCR to determine if we * are waking up from deep idle state */ LOAD_REG_ADDRBASE(r5,pnv_first_deep_stop_state) ld r4,ADDROFF(pnv_first_deep_stop_state)(r5) - mfspr r5,SPRN_PSSCR +BEGIN_FTR_SECTION_NESTED(71) + /* + * Assume that we are waking up from the state + * same as the Requested Level (RL) in the PSSCR + * which are Bits 60-63 + */ + ld r5,PACA_REQ_PSSCR(r13) + rldicl r5,r5,0,60 +FTR_SECTION_ELSE_NESTED(71) /* * 0-3 bits correspond to Power-Saving Level Status * which indicates the idle state we are waking up from */ + mfspr r5, SPRN_PSSCR rldicl r5,r5,4,60 +ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_POWER9_DD1, 71) cmpd cr4,r5,r4 bge cr4,pnv_wakeup_tb_loss /* returns to caller */ @@ -567,9 +557,9 @@ pnv_wakeup_tb_loss: * is required to return back to reset vector after hypervisor state * restore is complete. */ + mr r19,r12 mr r18,r4 mflr r17 - mfspr r16,SPRN_SRR1 BEGIN_FTR_SECTION CHECK_HMI_INTERRUPT END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) @@ -731,13 +721,14 @@ timebase_resync: * Use cr3 which indicates that we are waking up with atleast partial * hypervisor state loss to determine if TIMEBASE RESYNC is needed. */ - ble cr3,clear_lock + ble cr3,.Ltb_resynced /* Time base re-sync */ bl opal_resync_timebase; /* - * If waking up from sleep, per core state is not lost, skip to - * clear_lock. + * If waking up from sleep (POWER8), per core state + * is not lost, skip to clear_lock. */ +.Ltb_resynced: blt cr4,clear_lock /* @@ -812,9 +803,13 @@ no_segments: mtctr r12 bctrl +BEGIN_FTR_SECTION + ld r4,_LPCR(r1) + mtspr SPRN_LPCR,r4 +END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) hypervisor_state_restored: - mtspr SPRN_SRR1,r16 + mr r12,r19 mtlr r17 blr /* return to pnv_powersave_wakeup */ @@ -827,6 +822,7 @@ fastsleep_workaround_at_exit: /* * R3 here contains the value that will be returned to the caller * of power7_nap. + * R12 contains SRR1 for CHECK_HMI_INTERRUPT. */ .global pnv_wakeup_loss pnv_wakeup_loss: @@ -836,32 +832,33 @@ BEGIN_FTR_SECTION END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) REST_NVGPRS(r1) REST_GPR(2, r1) + ld r4,PACAKMSR(r13) + ld r5,_LINK(r1) ld r6,_CCR(r1) - ld r4,_MSR(r1) - ld r5,_NIP(r1) addi r1,r1,INT_FRAME_SIZE + mtlr r5 mtcr r6 - mtspr SPRN_SRR1,r4 - mtspr SPRN_SRR0,r5 - rfid + mtmsrd r4 + blr /* * R3 here contains the value that will be returned to the caller * of power7_nap. + * R12 contains SRR1 for CHECK_HMI_INTERRUPT. */ pnv_wakeup_noloss: lbz r0,PACA_NAPSTATELOST(r13) cmpwi r0,0 bne pnv_wakeup_loss + ld r1,PACAR1(r13) BEGIN_FTR_SECTION CHECK_HMI_INTERRUPT END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) - ld r1,PACAR1(r13) - ld r6,_CCR(r1) - ld r4,_MSR(r1) + ld r4,PACAKMSR(r13) ld r5,_NIP(r1) + ld r6,_CCR(r1) addi r1,r1,INT_FRAME_SIZE + mtlr r5 mtcr r6 - mtspr SPRN_SRR1,r4 - mtspr SPRN_SRR0,r5 - rfid + mtmsrd r4 + blr |
