summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kernel/exceptions-64s.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/kernel/exceptions-64s.S')
-rw-r--r--arch/powerpc/kernel/exceptions-64s.S314
1 files changed, 88 insertions, 226 deletions
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 15c5a4f..2d0868a 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -12,6 +12,7 @@
*
*/
+#include <asm/hw_irq.h>
#include <asm/exception-64s.h>
#include <asm/ptrace.h>
@@ -19,7 +20,7 @@
* We layout physical memory as follows:
* 0x0000 - 0x00ff : Secondary processor spin code
* 0x0100 - 0x2fff : pSeries Interrupt prologs
- * 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs
+ * 0x3000 - 0x5fff : interrupt support common interrupt prologs
* 0x6000 - 0x6fff : Initial (CPU0) segment table
* 0x7000 - 0x7fff : FWNMI data area
* 0x8000 - : Early init and support code
@@ -356,34 +357,60 @@ do_stab_bolted_pSeries:
KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf40)
/*
- * An interrupt came in while soft-disabled; clear EE in SRR1,
- * clear paca->hard_enabled and return.
+ * An interrupt came in while soft-disabled. We set paca->irq_happened,
+ * then, if it was a decrementer interrupt, we bump the dec to max and
+ * and return, else we hard disable and return. This is called with
+ * r10 containing the value to OR to the paca field.
*/
-masked_interrupt:
- stb r10,PACAHARDIRQEN(r13)
- mtcrf 0x80,r9
- ld r9,PACA_EXGEN+EX_R9(r13)
- mfspr r10,SPRN_SRR1
- rldicl r10,r10,48,1 /* clear MSR_EE */
- rotldi r10,r10,16
- mtspr SPRN_SRR1,r10
- ld r10,PACA_EXGEN+EX_R10(r13)
- GET_SCRATCH0(r13)
- rfid
+#define MASKED_INTERRUPT(_H) \
+masked_##_H##interrupt: \
+ std r11,PACA_EXGEN+EX_R11(r13); \
+ lbz r11,PACAIRQHAPPENED(r13); \
+ or r11,r11,r10; \
+ stb r11,PACAIRQHAPPENED(r13); \
+ andi. r10,r10,PACA_IRQ_DEC; \
+ beq 1f; \
+ lis r10,0x7fff; \
+ ori r10,r10,0xffff; \
+ mtspr SPRN_DEC,r10; \
+ b 2f; \
+1: mfspr r10,SPRN_##_H##SRR1; \
+ rldicl r10,r10,48,1; /* clear MSR_EE */ \
+ rotldi r10,r10,16; \
+ mtspr SPRN_##_H##SRR1,r10; \
+2: mtcrf 0x80,r9; \
+ ld r9,PACA_EXGEN+EX_R9(r13); \
+ ld r10,PACA_EXGEN+EX_R10(r13); \
+ ld r11,PACA_EXGEN+EX_R11(r13); \
+ GET_SCRATCH0(r13); \
+ ##_H##rfid; \
b .
+
+ MASKED_INTERRUPT()
+ MASKED_INTERRUPT(H)
-masked_Hinterrupt:
- stb r10,PACAHARDIRQEN(r13)
- mtcrf 0x80,r9
- ld r9,PACA_EXGEN+EX_R9(r13)
- mfspr r10,SPRN_HSRR1
- rldicl r10,r10,48,1 /* clear MSR_EE */
- rotldi r10,r10,16
- mtspr SPRN_HSRR1,r10
- ld r10,PACA_EXGEN+EX_R10(r13)
- GET_SCRATCH0(r13)
- hrfid
- b .
+/*
+ * Called from arch_local_irq_enable when an interrupt needs
+ * to be resent. r3 contains 0x500 or 0x900 to indicate which
+ * kind of interrupt. MSR:EE is already off. We generate a
+ * stackframe like if a real interrupt had happened.
+ *
+ * Note: While MSR:EE is off, we need to make sure that _MSR
+ * in the generated frame has EE set to 1 or the exception
+ * handler will not properly re-enable them.
+ */
+_GLOBAL(__replay_interrupt)
+ /* We are going to jump to the exception common code which
+ * will retrieve various register values from the PACA which
+ * we don't give a damn about, so we don't bother storing them.
+ */
+ mfmsr r12
+ mflr r11
+ mfcr r9
+ ori r12,r12,MSR_EE
+ andi. r3,r3,0x0800
+ bne decrementer_common
+ b hardware_interrupt_common
#ifdef CONFIG_PPC_PSERIES
/*
@@ -458,14 +485,15 @@ machine_check_common:
bl .machine_check_exception
b .ret_from_except
- STD_EXCEPTION_COMMON_LITE(0x900, decrementer, .timer_interrupt)
+ STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ)
+ STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, .timer_interrupt)
STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception)
STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
STD_EXCEPTION_COMMON(0xe40, emulation_assist, .program_check_exception)
STD_EXCEPTION_COMMON(0xe60, hmi_exception, .unknown_exception)
- STD_EXCEPTION_COMMON_IDLE(0xf00, performance_monitor, .performance_monitor_exception)
+ STD_EXCEPTION_COMMON_ASYNC(0xf00, performance_monitor, .performance_monitor_exception)
STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
#ifdef CONFIG_ALTIVEC
STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception)
@@ -482,6 +510,9 @@ machine_check_common:
system_call_entry:
b system_call_common
+ppc64_runlatch_on_trampoline:
+ b .__ppc64_runlatch_on
+
/*
* Here we have detected that the kernel stack pointer is bad.
* R9 contains the saved CR, r13 points to the paca,
@@ -555,6 +586,8 @@ data_access_common:
mfspr r10,SPRN_DSISR
stw r10,PACA_EXGEN+EX_DSISR(r13)
EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN)
+ DISABLE_INTS
+ ld r12,_MSR(r1)
ld r3,PACA_EXGEN+EX_DAR(r13)
lwz r4,PACA_EXGEN+EX_DSISR(r13)
li r5,0x300
@@ -569,6 +602,7 @@ h_data_storage_common:
stw r10,PACA_EXGEN+EX_DSISR(r13)
EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN)
bl .save_nvgprs
+ DISABLE_INTS
addi r3,r1,STACK_FRAME_OVERHEAD
bl .unknown_exception
b .ret_from_except
@@ -577,6 +611,8 @@ h_data_storage_common:
.globl instruction_access_common
instruction_access_common:
EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN)
+ DISABLE_INTS
+ ld r12,_MSR(r1)
ld r3,_NIP(r1)
andis. r4,r12,0x5820
li r5,0x400
@@ -672,12 +708,6 @@ _GLOBAL(slb_miss_realmode)
ld r10,PACA_EXSLB+EX_LR(r13)
ld r3,PACA_EXSLB+EX_R3(r13)
lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */
-#ifdef CONFIG_PPC_ISERIES
-BEGIN_FW_FTR_SECTION
- ld r11,PACALPPACAPTR(r13)
- ld r11,LPPACASRR0(r11) /* get SRR0 value */
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif /* CONFIG_PPC_ISERIES */
mtlr r10
@@ -690,12 +720,6 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */
.machine pop
-#ifdef CONFIG_PPC_ISERIES
-BEGIN_FW_FTR_SECTION
- mtspr SPRN_SRR0,r11
- mtspr SPRN_SRR1,r12
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif /* CONFIG_PPC_ISERIES */
ld r9,PACA_EXSLB+EX_R9(r13)
ld r10,PACA_EXSLB+EX_R10(r13)
ld r11,PACA_EXSLB+EX_R11(r13)
@@ -704,13 +728,7 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
rfid
b . /* prevent speculative execution */
-2:
-#ifdef CONFIG_PPC_ISERIES
-BEGIN_FW_FTR_SECTION
- b unrecov_slb
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif /* CONFIG_PPC_ISERIES */
- mfspr r11,SPRN_SRR0
+2: mfspr r11,SPRN_SRR0
ld r10,PACAKBASE(r13)
LOAD_HANDLER(r10,unrecov_slb)
mtspr SPRN_SRR0,r10
@@ -727,20 +745,6 @@ unrecov_slb:
bl .unrecoverable_exception
b 1b
- .align 7
- .globl hardware_interrupt_common
- .globl hardware_interrupt_entry
-hardware_interrupt_common:
- EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN)
- FINISH_NAP
-hardware_interrupt_entry:
- DISABLE_INTS
-BEGIN_FTR_SECTION
- bl .ppc64_runlatch_on
-END_FTR_SECTION_IFSET(CPU_FTR_CTRL)
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_IRQ
- b .ret_from_except_lite
#ifdef CONFIG_PPC_970_NAP
power4_fixup_nap:
@@ -785,8 +789,8 @@ fp_unavailable_common:
EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
bne 1f /* if from user, just load it up */
bl .save_nvgprs
+ DISABLE_INTS
addi r3,r1,STACK_FRAME_OVERHEAD
- ENABLE_INTS
bl .kernel_fp_unavailable_exception
BUG_OPCODE
1: bl .load_up_fpu
@@ -805,8 +809,8 @@ BEGIN_FTR_SECTION
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
#endif
bl .save_nvgprs
+ DISABLE_INTS
addi r3,r1,STACK_FRAME_OVERHEAD
- ENABLE_INTS
bl .altivec_unavailable_exception
b .ret_from_except
@@ -816,13 +820,14 @@ vsx_unavailable_common:
EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN)
#ifdef CONFIG_VSX
BEGIN_FTR_SECTION
- bne .load_up_vsx
+ beq 1f
+ b .load_up_vsx
1:
END_FTR_SECTION_IFSET(CPU_FTR_VSX)
#endif
bl .save_nvgprs
+ DISABLE_INTS
addi r3,r1,STACK_FRAME_OVERHEAD
- ENABLE_INTS
bl .vsx_unavailable_exception
b .ret_from_except
@@ -831,66 +836,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
__end_handlers:
/*
- * Return from an exception with minimal checks.
- * The caller is assumed to have done EXCEPTION_PROLOG_COMMON.
- * If interrupts have been enabled, or anything has been
- * done that might have changed the scheduling status of
- * any task or sent any task a signal, you should use
- * ret_from_except or ret_from_except_lite instead of this.
- */
-fast_exc_return_irq: /* restores irq state too */
- ld r3,SOFTE(r1)
- TRACE_AND_RESTORE_IRQ(r3);
- ld r12,_MSR(r1)
- rldicl r4,r12,49,63 /* get MSR_EE to LSB */
- stb r4,PACAHARDIRQEN(r13) /* restore paca->hard_enabled */
- b 1f
-
- .globl fast_exception_return
-fast_exception_return:
- ld r12,_MSR(r1)
-1: ld r11,_NIP(r1)
- andi. r3,r12,MSR_RI /* check if RI is set */
- beq- unrecov_fer
-
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
- andi. r3,r12,MSR_PR
- beq 2f
- ACCOUNT_CPU_USER_EXIT(r3, r4)
-2:
-#endif
-
- ld r3,_CCR(r1)
- ld r4,_LINK(r1)
- ld r5,_CTR(r1)
- ld r6,_XER(r1)
- mtcr r3
- mtlr r4
- mtctr r5
- mtxer r6
- REST_GPR(0, r1)
- REST_8GPRS(2, r1)
-
- mfmsr r10
- rldicl r10,r10,48,1 /* clear EE */
- rldicr r10,r10,16,61 /* clear RI (LE is 0 already) */
- mtmsrd r10,1
-
- mtspr SPRN_SRR1,r12
- mtspr SPRN_SRR0,r11
- REST_4GPRS(10, r1)
- ld r1,GPR1(r1)
- rfid
- b . /* prevent speculative execution */
-
-unrecov_fer:
- bl .save_nvgprs
-1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .unrecoverable_exception
- b 1b
-
-
-/*
* Hash table stuff
*/
.align 7
@@ -912,28 +857,6 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB)
lwz r0,TI_PREEMPT(r11) /* If we're in an "NMI" */
andis. r0,r0,NMI_MASK@h /* (i.e. an irq when soft-disabled) */
bne 77f /* then don't call hash_page now */
-
- /*
- * On iSeries, we soft-disable interrupts here, then
- * hard-enable interrupts so that the hash_page code can spin on
- * the hash_table_lock without problems on a shared processor.
- */
- DISABLE_INTS
-
- /*
- * Currently, trace_hardirqs_off() will be called by DISABLE_INTS
- * and will clobber volatile registers when irq tracing is enabled
- * so we need to reload them. It may be possible to be smarter here
- * and move the irq tracing elsewhere but let's keep it simple for
- * now
- */
-#ifdef CONFIG_TRACE_IRQFLAGS
- ld r3,_DAR(r1)
- ld r4,_DSISR(r1)
- ld r5,_TRAP(r1)
- ld r12,_MSR(r1)
- clrrdi r5,r5,4
-#endif /* CONFIG_TRACE_IRQFLAGS */
/*
* We need to set the _PAGE_USER bit if MSR_PR is set or if we are
* accessing a userspace segment (even from the kernel). We assume
@@ -951,62 +874,25 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB)
* r4 contains the required access permissions
* r5 contains the trap number
*
- * at return r3 = 0 for success
+ * at return r3 = 0 for success, 1 for page fault, negative for error
*/
bl .hash_page /* build HPTE if possible */
cmpdi r3,0 /* see if hash_page succeeded */
-BEGIN_FW_FTR_SECTION
- /*
- * If we had interrupts soft-enabled at the point where the
- * DSI/ISI occurred, and an interrupt came in during hash_page,
- * handle it now.
- * We jump to ret_from_except_lite rather than fast_exception_return
- * because ret_from_except_lite will check for and handle pending
- * interrupts if necessary.
- */
- beq 13f
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-
-BEGIN_FW_FTR_SECTION
- /*
- * Here we have interrupts hard-disabled, so it is sufficient
- * to restore paca->{soft,hard}_enable and get out.
- */
+ /* Success */
beq fast_exc_return_irq /* Return from exception on success */
-END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
-
- /* For a hash failure, we don't bother re-enabling interrupts */
- ble- 12f
-
- /*
- * hash_page couldn't handle it, set soft interrupt enable back
- * to what it was before the trap. Note that .arch_local_irq_restore
- * handles any interrupts pending at this point.
- */
- ld r3,SOFTE(r1)
- TRACE_AND_RESTORE_IRQ_PARTIAL(r3, 11f)
- bl .arch_local_irq_restore
- b 11f
-/* We have a data breakpoint exception - handle it */
-handle_dabr_fault:
- bl .save_nvgprs
- ld r4,_DAR(r1)
- ld r5,_DSISR(r1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- bl .do_dabr
- b .ret_from_except_lite
+ /* Error */
+ blt- 13f
/* Here we have a page fault that hash_page can't handle. */
handle_page_fault:
- ENABLE_INTS
11: ld r4,_DAR(r1)
ld r5,_DSISR(r1)
addi r3,r1,STACK_FRAME_OVERHEAD
bl .do_page_fault
cmpdi r3,0
- beq+ 13f
+ beq+ 12f
bl .save_nvgprs
mr r5,r3
addi r3,r1,STACK_FRAME_OVERHEAD
@@ -1014,12 +900,20 @@ handle_page_fault:
bl .bad_page_fault
b .ret_from_except
-13: b .ret_from_except_lite
+/* We have a data breakpoint exception - handle it */
+handle_dabr_fault:
+ bl .save_nvgprs
+ ld r4,_DAR(r1)
+ ld r5,_DSISR(r1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl .do_dabr
+12: b .ret_from_except_lite
+
/* We have a page fault that hash_page could handle but HV refused
* the PTE insertion
*/
-12: bl .save_nvgprs
+13: bl .save_nvgprs
mr r5,r3
addi r3,r1,STACK_FRAME_OVERHEAD
ld r4,_DAR(r1)
@@ -1141,51 +1035,19 @@ _GLOBAL(do_stab_bolted)
.= 0x7000
.globl fwnmi_data_area
fwnmi_data_area:
-#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */
- /* iSeries does not use the FWNMI stuff, so it is safe to put
- * this here, even if we later allow kernels that will boot on
- * both pSeries and iSeries */
-#ifdef CONFIG_PPC_ISERIES
- . = LPARMAP_PHYS
- .globl xLparMap
-xLparMap:
- .quad HvEsidsToMap /* xNumberEsids */
- .quad HvRangesToMap /* xNumberRanges */
- .quad STAB0_PAGE /* xSegmentTableOffs */
- .zero 40 /* xRsvd */
- /* xEsids (HvEsidsToMap entries of 2 quads) */
- .quad PAGE_OFFSET_ESID /* xKernelEsid */
- .quad PAGE_OFFSET_VSID /* xKernelVsid */
- .quad VMALLOC_START_ESID /* xKernelEsid */
- .quad VMALLOC_START_VSID /* xKernelVsid */
- /* xRanges (HvRangesToMap entries of 3 quads) */
- .quad HvPagesToMap /* xPages */
- .quad 0 /* xOffset */
- .quad PAGE_OFFSET_VSID << (SID_SHIFT - HW_PAGE_SHIFT) /* xVPN */
-
-#endif /* CONFIG_PPC_ISERIES */
-
-#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
/* pseries and powernv need to keep the whole page from
* 0x7000 to 0x8000 free for use by the firmware
*/
. = 0x8000
#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */
-/*
- * Space for CPU0's segment table.
- *
- * On iSeries, the hypervisor must fill in at least one entry before
- * we get control (with relocate on). The address is given to the hv
- * as a page number (see xLparMap above), so this must be at a
- * fixed address (the linker can't compute (u64)&initial_stab >>
- * PAGE_SHIFT).
- */
- . = STAB0_OFFSET /* 0x8000 */
+/* Space for CPU0's segment table */
+ .balign 4096
.globl initial_stab
initial_stab:
.space 4096
+
#ifdef CONFIG_PPC_POWERNV
_GLOBAL(opal_mc_secondary_handler)
HMT_MEDIUM
OpenPOWER on IntegriCloud