diff options
Diffstat (limited to 'arch/powerpc/boot')
90 files changed, 6467 insertions, 2082 deletions
diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore index eec7af7..65f4118 100644 --- a/arch/powerpc/boot/.gitignore +++ b/arch/powerpc/boot/.gitignore @@ -18,14 +18,15 @@ kernel-vmlinux.strip.c kernel-vmlinux.strip.gz mktree uImage -cuImage -cuImage.bin.gz -cuImage.elf +cuImage.* +treeImage.* zImage +zImage.bin.* zImage.chrp zImage.coff zImage.coff.lds -zImage.lds +zImage.ep* +zImage.*lds zImage.miboot zImage.pmac zImage.pseries diff --git a/arch/powerpc/boot/44x.c b/arch/powerpc/boot/44x.c deleted file mode 100644 index 9f64e84..0000000 --- a/arch/powerpc/boot/44x.c +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Copyright 2007 David Gibson, IBM Corporation. - * - * Based on earlier code: - * Matt Porter <mporter@kernel.crashing.org> - * Copyright 2002-2005 MontaVista Software Inc. - * - * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> - * Copyright (c) 2003, 2004 Zultys Technologies - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <stddef.h> -#include "types.h" -#include "string.h" -#include "stdio.h" -#include "ops.h" -#include "reg.h" -#include "dcr.h" - -/* Read the 44x memory controller to get size of system memory. */ -void ibm44x_fixup_memsize(void) -{ - int i; - unsigned long memsize, bank_config; - - memsize = 0; - for (i = 0; i < ARRAY_SIZE(sdram_bxcr); i++) { - mtdcr(DCRN_SDRAM0_CFGADDR, sdram_bxcr[i]); - bank_config = mfdcr(DCRN_SDRAM0_CFGDATA); - - if (bank_config & SDRAM_CONFIG_BANK_ENABLE) - memsize += SDRAM_CONFIG_BANK_SIZE(bank_config); - } - - dt_fixup_memory(0, memsize); -} - -#define SPRN_DBCR0 0x134 -#define DBCR0_RST_SYSTEM 0x30000000 - -void ibm44x_dbcr_reset(void) -{ - unsigned long tmp; - - asm volatile ( - "mfspr %0,%1\n" - "oris %0,%0,%2@h\n" - "mtspr %1,%0" - : "=&r"(tmp) : "i"(SPRN_DBCR0), "i"(DBCR0_RST_SYSTEM) - ); - -} - -/* Read 4xx EBC bus bridge registers to get mappings of the peripheral - * banks into the OPB address space */ -void ibm4xx_fixup_ebc_ranges(const char *ebc) -{ - void *devp; - u32 bxcr; - u32 ranges[EBC_NUM_BANKS*4]; - u32 *p = ranges; - int i; - - for (i = 0; i < EBC_NUM_BANKS; i++) { - mtdcr(DCRN_EBC0_CFGADDR, EBC_BXCR(i)); - bxcr = mfdcr(DCRN_EBC0_CFGDATA); - - if ((bxcr & EBC_BXCR_BU) != EBC_BXCR_BU_OFF) { - *p++ = i; - *p++ = 0; - *p++ = bxcr & EBC_BXCR_BAS; - *p++ = EBC_BXCR_BANK_SIZE(bxcr); - } - } - - devp = finddevice(ebc); - if (! devp) - fatal("Couldn't locate EBC node %s\n\r", ebc); - - setprop(devp, "ranges", ranges, (p - ranges) * sizeof(u32)); -} diff --git a/arch/powerpc/boot/44x.h b/arch/powerpc/boot/44x.h index 577982c..02563443 100644 --- a/arch/powerpc/boot/44x.h +++ b/arch/powerpc/boot/44x.h @@ -10,10 +10,7 @@ #ifndef _PPC_BOOT_44X_H_ #define _PPC_BOOT_44X_H_ -void ibm44x_fixup_memsize(void); -void ibm4xx_fixup_ebc_ranges(const char *ebc); - -void ibm44x_dbcr_reset(void); void ebony_init(void *mac0, void *mac1); +void bamboo_init(void *mac0, void *mac1); #endif /* _PPC_BOOT_44X_H_ */ diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c new file mode 100644 index 0000000..ebf9e21 --- /dev/null +++ b/arch/powerpc/boot/4xx.c @@ -0,0 +1,300 @@ +/* + * Copyright 2007 David Gibson, IBM Corporation. + * + * Based on earlier code: + * Matt Porter <mporter@kernel.crashing.org> + * Copyright 2002-2005 MontaVista Software Inc. + * + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * Copyright (c) 2003, 2004 Zultys Technologies + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <stddef.h> +#include "types.h" +#include "string.h" +#include "stdio.h" +#include "ops.h" +#include "reg.h" +#include "dcr.h" + +/* Read the 4xx SDRAM controller to get size of system memory. */ +void ibm4xx_fixup_memsize(void) +{ + int i; + unsigned long memsize, bank_config; + + memsize = 0; + for (i = 0; i < ARRAY_SIZE(sdram_bxcr); i++) { + mtdcr(DCRN_SDRAM0_CFGADDR, sdram_bxcr[i]); + bank_config = mfdcr(DCRN_SDRAM0_CFGDATA); + + if (bank_config & SDRAM_CONFIG_BANK_ENABLE) + memsize += SDRAM_CONFIG_BANK_SIZE(bank_config); + } + + dt_fixup_memory(0, memsize); +} + +/* 4xx DDR1/2 Denali memory controller support */ +/* DDR0 registers */ +#define DDR0_02 2 +#define DDR0_08 8 +#define DDR0_10 10 +#define DDR0_14 14 +#define DDR0_42 42 +#define DDR0_43 43 + +/* DDR0_02 */ +#define DDR_START 0x1 +#define DDR_START_SHIFT 0 +#define DDR_MAX_CS_REG 0x3 +#define DDR_MAX_CS_REG_SHIFT 24 +#define DDR_MAX_COL_REG 0xf +#define DDR_MAX_COL_REG_SHIFT 16 +#define DDR_MAX_ROW_REG 0xf +#define DDR_MAX_ROW_REG_SHIFT 8 +/* DDR0_08 */ +#define DDR_DDR2_MODE 0x1 +#define DDR_DDR2_MODE_SHIFT 0 +/* DDR0_10 */ +#define DDR_CS_MAP 0x3 +#define DDR_CS_MAP_SHIFT 8 +/* DDR0_14 */ +#define DDR_REDUC 0x1 +#define DDR_REDUC_SHIFT 16 +/* DDR0_42 */ +#define DDR_APIN 0x7 +#define DDR_APIN_SHIFT 24 +/* DDR0_43 */ +#define DDR_COL_SZ 0x7 +#define DDR_COL_SZ_SHIFT 8 +#define DDR_BANK8 0x1 +#define DDR_BANK8_SHIFT 0 + +#define DDR_GET_VAL(val, mask, shift) (((val) >> (shift)) & (mask)) + +static inline u32 mfdcr_sdram0(u32 reg) +{ + mtdcr(DCRN_SDRAM0_CFGADDR, reg); + return mfdcr(DCRN_SDRAM0_CFGDATA); +} + +void ibm4xx_denali_fixup_memsize(void) +{ + u32 val, max_cs, max_col, max_row; + u32 cs, col, row, bank, dpath; + unsigned long memsize; + + val = mfdcr_sdram0(DDR0_02); + if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT)) + fatal("DDR controller is not initialized\n"); + + /* get maximum cs col and row values */ + max_cs = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT); + max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT); + max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT); + + /* get CS value */ + val = mfdcr_sdram0(DDR0_10); + + val = DDR_GET_VAL(val, DDR_CS_MAP, DDR_CS_MAP_SHIFT); + cs = 0; + while (val) { + if (val && 0x1) + cs++; + val = val >> 1; + } + + if (!cs) + fatal("No memory installed\n"); + if (cs > max_cs) + fatal("DDR wrong CS configuration\n"); + + /* get data path bytes */ + val = mfdcr_sdram0(DDR0_14); + + if (DDR_GET_VAL(val, DDR_REDUC, DDR_REDUC_SHIFT)) + dpath = 8; /* 64 bits */ + else + dpath = 4; /* 32 bits */ + + /* get adress pins (rows) */ + val = mfdcr_sdram0(DDR0_42); + + row = DDR_GET_VAL(val, DDR_APIN, DDR_APIN_SHIFT); + if (row > max_row) + fatal("DDR wrong APIN configuration\n"); + row = max_row - row; + + /* get collomn size and banks */ + val = mfdcr_sdram0(DDR0_43); + + col = DDR_GET_VAL(val, DDR_COL_SZ, DDR_COL_SZ_SHIFT); + if (col > max_col) + fatal("DDR wrong COL configuration\n"); + col = max_col - col; + + if (DDR_GET_VAL(val, DDR_BANK8, DDR_BANK8_SHIFT)) + bank = 8; /* 8 banks */ + else + bank = 4; /* 4 banks */ + + memsize = cs * (1 << (col+row)) * bank * dpath; + dt_fixup_memory(0, memsize); +} + +#define SPRN_DBCR0_40X 0x3F2 +#define SPRN_DBCR0_44X 0x134 +#define DBCR0_RST_SYSTEM 0x30000000 + +void ibm44x_dbcr_reset(void) +{ + unsigned long tmp; + + asm volatile ( + "mfspr %0,%1\n" + "oris %0,%0,%2@h\n" + "mtspr %1,%0" + : "=&r"(tmp) : "i"(SPRN_DBCR0_44X), "i"(DBCR0_RST_SYSTEM) + ); + +} + +void ibm40x_dbcr_reset(void) +{ + unsigned long tmp; + + asm volatile ( + "mfspr %0,%1\n" + "oris %0,%0,%2@h\n" + "mtspr %1,%0" + : "=&r"(tmp) : "i"(SPRN_DBCR0_40X), "i"(DBCR0_RST_SYSTEM) + ); +} + +#define EMAC_RESET 0x20000000 +void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1) +{ + /* Quiesce the MAL and EMAC(s) since PIBS/OpenBIOS don't do this for us */ + if (emac0) + *emac0 = EMAC_RESET; + if (emac1) + *emac1 = EMAC_RESET; + + mtdcr(DCRN_MAL0_CFG, MAL_RESET); +} + +/* Read 4xx EBC bus bridge registers to get mappings of the peripheral + * banks into the OPB address space */ +void ibm4xx_fixup_ebc_ranges(const char *ebc) +{ + void *devp; + u32 bxcr; + u32 ranges[EBC_NUM_BANKS*4]; + u32 *p = ranges; + int i; + + for (i = 0; i < EBC_NUM_BANKS; i++) { + mtdcr(DCRN_EBC0_CFGADDR, EBC_BXCR(i)); + bxcr = mfdcr(DCRN_EBC0_CFGDATA); + + if ((bxcr & EBC_BXCR_BU) != EBC_BXCR_BU_OFF) { + *p++ = i; + *p++ = 0; + *p++ = bxcr & EBC_BXCR_BAS; + *p++ = EBC_BXCR_BANK_SIZE(bxcr); + } + } + + devp = finddevice(ebc); + if (! devp) + fatal("Couldn't locate EBC node %s\n\r", ebc); + + setprop(devp, "ranges", ranges, (p - ranges) * sizeof(u32)); +} + +#define SPRN_CCR1 0x378 +void ibm440ep_fixup_clocks(unsigned int sysclk, unsigned int ser_clk) +{ + u32 cpu, plb, opb, ebc, tb, uart0, m, vco; + u32 reg; + u32 fwdva, fwdvb, fbdv, lfbdv, opbdv0, perdv0, spcid0, prbdv0, tmp; + + mtdcr(DCRN_CPR0_ADDR, CPR0_PLLD0); + reg = mfdcr(DCRN_CPR0_DATA); + tmp = (reg & 0x000F0000) >> 16; + fwdva = tmp ? tmp : 16; + tmp = (reg & 0x00000700) >> 8; + fwdvb = tmp ? tmp : 8; + tmp = (reg & 0x1F000000) >> 24; + fbdv = tmp ? tmp : 32; + lfbdv = (reg & 0x0000007F); + + mtdcr(DCRN_CPR0_ADDR, CPR0_OPBD0); + reg = mfdcr(DCRN_CPR0_DATA); + tmp = (reg & 0x03000000) >> 24; + opbdv0 = tmp ? tmp : 4; + + mtdcr(DCRN_CPR0_ADDR, CPR0_PERD0); + reg = mfdcr(DCRN_CPR0_DATA); + tmp = (reg & 0x07000000) >> 24; + perdv0 = tmp ? tmp : 8; + + mtdcr(DCRN_CPR0_ADDR, CPR0_PRIMBD0); + reg = mfdcr(DCRN_CPR0_DATA); + tmp = (reg & 0x07000000) >> 24; + prbdv0 = tmp ? tmp : 8; + + mtdcr(DCRN_CPR0_ADDR, CPR0_SCPID); + reg = mfdcr(DCRN_CPR0_DATA); + tmp = (reg & 0x03000000) >> 24; + spcid0 = tmp ? tmp : 4; + + /* Calculate M */ + mtdcr(DCRN_CPR0_ADDR, CPR0_PLLC0); + reg = mfdcr(DCRN_CPR0_DATA); + tmp = (reg & 0x03000000) >> 24; + if (tmp == 0) { /* PLL output */ + tmp = (reg & 0x20000000) >> 29; + if (!tmp) /* PLLOUTA */ + m = fbdv * lfbdv * fwdva; + else + m = fbdv * lfbdv * fwdvb; + } + else if (tmp == 1) /* CPU output */ + m = fbdv * fwdva; + else + m = perdv0 * opbdv0 * fwdvb; + + vco = (m * sysclk) + (m >> 1); + cpu = vco / fwdva; + plb = vco / fwdvb / prbdv0; + opb = plb / opbdv0; + ebc = plb / perdv0; + + /* FIXME */ + uart0 = ser_clk; + + /* Figure out timebase. Either CPU or default TmrClk */ + asm volatile ( + "mfspr %0,%1\n" + : + "=&r"(reg) : "i"(SPRN_CCR1)); + if (reg & 0x0080) + tb = 25000000; /* TmrClk is 25MHz */ + else + tb = cpu; + + dt_fixup_cpu_clocks(cpu, tb, 0); + dt_fixup_clock("/plb", plb); + dt_fixup_clock("/plb/opb", opb); + dt_fixup_clock("/plb/opb/ebc", ebc); + dt_fixup_clock("/plb/opb/serial@ef600300", uart0); + dt_fixup_clock("/plb/opb/serial@ef600400", uart0); + dt_fixup_clock("/plb/opb/serial@ef600500", uart0); + dt_fixup_clock("/plb/opb/serial@ef600600", uart0); +} diff --git a/arch/powerpc/boot/4xx.h b/arch/powerpc/boot/4xx.h new file mode 100644 index 0000000..adba6a5 --- /dev/null +++ b/arch/powerpc/boot/4xx.h @@ -0,0 +1,22 @@ +/* + * PowerPC 4xx related functions + * + * Copyright 2007 IBM Corporation. + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#ifndef _POWERPC_BOOT_4XX_H_ +#define _POWERPC_BOOT_4XX_H_ + +void ibm4xx_fixup_memsize(void); +void ibm4xx_denali_fixup_memsize(void); +void ibm44x_dbcr_reset(void); +void ibm40x_dbcr_reset(void); +void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1); +void ibm4xx_fixup_ebc_ranges(const char *ebc); +void ibm440ep_fixup_clocks(unsigned int sysclk, unsigned int ser_clk); + +#endif /* _POWERPC_BOOT_4XX_H_ */ diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 61a6f34..18e3271 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -25,14 +25,19 @@ BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ -isystem $(shell $(CROSS32CC) -print-file-name=include) BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc +ifdef CONFIG_DEBUG_INFO +BOOTCFLAGS += -g +endif + ifeq ($(call cc-option-yn, -fstack-protector),y) BOOTCFLAGS += -fno-stack-protector endif BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) -$(obj)/44x.o: BOOTCFLAGS += -mcpu=440 +$(obj)/4xx.o: BOOTCFLAGS += -mcpu=440 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=440 +$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405 zlib := inffast.c inflate.c inftrees.c zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h @@ -44,10 +49,14 @@ $(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \ src-wlib := string.S crt0.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \ ns16550.c serial.c simple_alloc.c div64.S util.S \ gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \ - 44x.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c -src-plat := of.c cuboot-83xx.c cuboot-85xx.c holly.c \ + 4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \ + cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \ + fsl-soc.c mpc8xx.c pq2.c +src-plat := of.c cuboot-52xx.c cuboot-83xx.c cuboot-85xx.c holly.c \ cuboot-ebony.c treeboot-ebony.c prpmc2800.c \ - ps3-head.S ps3-hvcall.S ps3.c + ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \ + cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c cuboot-bamboo.c \ + fixed-head.S ep88xc.c cuboot-hpc2.c src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(addprefix $(obj)/, $(src-boot)) @@ -139,9 +148,17 @@ image-$(CONFIG_PPC_ISERIES) += zImage.iseries image-$(CONFIG_DEFAULT_UIMAGE) += uImage ifneq ($(CONFIG_DEVICE_TREE),"") +image-$(CONFIG_PPC_8xx) += cuImage.8xx +image-$(CONFIG_PPC_EP88XC) += zImage.ep88xc +image-$(CONFIG_8260) += cuImage.pq2 +image-$(CONFIG_PPC_MPC52xx) += cuImage.52xx image-$(CONFIG_PPC_83xx) += cuImage.83xx image-$(CONFIG_PPC_85xx) += cuImage.85xx +image-$(CONFIG_MPC7448HPC2) += cuImage.hpc2 image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony +image-$(CONFIG_BAMBOO) += treeImage.bamboo cuImage.bamboo +image-$(CONFIG_SEQUOIA) += cuImage.sequoia +image-$(CONFIG_WALNUT) += treeImage.walnut endif # For 32-bit powermacs, build the COFF and miboot images diff --git a/arch/powerpc/boot/bamboo.c b/arch/powerpc/boot/bamboo.c new file mode 100644 index 0000000..f61fcda --- /dev/null +++ b/arch/powerpc/boot/bamboo.c @@ -0,0 +1,47 @@ +/* + * Copyright IBM Corporation, 2007 + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * Based on ebony wrapper: + * Copyright 2007 David Gibson, IBM Corporation. + * + * Clocking code based on code by: + * Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 of the License + */ +#include <stdarg.h> +#include <stddef.h> +#include "types.h" +#include "elf.h" +#include "string.h" +#include "stdio.h" +#include "page.h" +#include "ops.h" +#include "dcr.h" +#include "4xx.h" +#include "44x.h" + +static u8 *bamboo_mac0, *bamboo_mac1; + +static void bamboo_fixups(void) +{ + unsigned long sysclk = 33333333; + + ibm440ep_fixup_clocks(sysclk, 11059200); + ibm4xx_fixup_memsize(); + ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00); + dt_fixup_mac_addresses(bamboo_mac0, bamboo_mac1); +} + +void bamboo_init(void *mac0, void *mac1) +{ + platform_ops.fixups = bamboo_fixups; + platform_ops.exit = ibm44x_dbcr_reset; + bamboo_mac0 = mac0; + bamboo_mac1 = mac1; + ft_init(_dtb_start, 0, 32); + serial_console_init(); +} diff --git a/arch/powerpc/boot/cpm-serial.c b/arch/powerpc/boot/cpm-serial.c new file mode 100644 index 0000000..28296fa --- /dev/null +++ b/arch/powerpc/boot/cpm-serial.c @@ -0,0 +1,269 @@ +/* + * CPM serial console support. + * + * Copyright 2007 Freescale Semiconductor, Inc. + * Author: Scott Wood <scottwood@freescale.com> + * + * It is assumed that the firmware (or the platform file) has already set + * up the port. + */ + +#include "types.h" +#include "io.h" +#include "ops.h" + +struct cpm_scc { + u32 gsmrl; + u32 gsmrh; + u16 psmr; + u8 res1[2]; + u16 todr; + u16 dsr; + u16 scce; + u8 res2[2]; + u16 sccm; + u8 res3; + u8 sccs; + u8 res4[8]; +}; + +struct cpm_smc { + u8 res1[2]; + u16 smcmr; + u8 res2[2]; + u8 smce; + u8 res3[3]; + u8 smcm; + u8 res4[5]; +}; + +struct cpm_param { + u16 rbase; + u16 tbase; + u8 rfcr; + u8 tfcr; +}; + +struct cpm_bd { + u16 sc; /* Status and Control */ + u16 len; /* Data length in buffer */ + u8 *addr; /* Buffer address in host memory */ +}; + +static void *cpcr; +static struct cpm_param *param; +static struct cpm_smc *smc; +static struct cpm_scc *scc; +struct cpm_bd *tbdf, *rbdf; +static u32 cpm_cmd; +static u8 *muram_start; +static u32 muram_offset; + +static void (*do_cmd)(int op); +static void (*enable_port)(void); +static void (*disable_port)(void); + +#define CPM_CMD_STOP_TX 4 +#define CPM_CMD_RESTART_TX 6 +#define CPM_CMD_INIT_RX_TX 0 + +static void cpm1_cmd(int op) +{ + while (in_be16(cpcr) & 1) + ; + + out_be16(cpcr, (op << 8) | cpm_cmd | 1); + + while (in_be16(cpcr) & 1) + ; +} + +static void cpm2_cmd(int op) +{ + while (in_be32(cpcr) & 0x10000) + ; + + out_be32(cpcr, op | cpm_cmd | 0x10000); + + while (in_be32(cpcr) & 0x10000) + ; +} + +static void smc_disable_port(void) +{ + do_cmd(CPM_CMD_STOP_TX); + out_be16(&smc->smcmr, in_be16(&smc->smcmr) & ~3); +} + +static void scc_disable_port(void) +{ + do_cmd(CPM_CMD_STOP_TX); + out_be32(&scc->gsmrl, in_be32(&scc->gsmrl) & ~0x30); +} + +static void smc_enable_port(void) +{ + out_be16(&smc->smcmr, in_be16(&smc->smcmr) | 3); + do_cmd(CPM_CMD_RESTART_TX); +} + +static void scc_enable_port(void) +{ + out_be32(&scc->gsmrl, in_be32(&scc->gsmrl) | 0x30); + do_cmd(CPM_CMD_RESTART_TX); +} + +static int cpm_serial_open(void) +{ + disable_port(); + + out_8(¶m->rfcr, 0x10); + out_8(¶m->tfcr, 0x10); + + rbdf = (struct cpm_bd *)muram_start; + rbdf->addr = (u8 *)(rbdf + 2); + rbdf->sc = 0xa000; + rbdf->len = 1; + + tbdf = rbdf + 1; + tbdf->addr = (u8 *)(rbdf + 2) + 1; + tbdf->sc = 0x2000; + tbdf->len = 1; + + sync(); + out_be16(¶m->rbase, muram_offset); + out_be16(¶m->tbase, muram_offset + sizeof(struct cpm_bd)); + + do_cmd(CPM_CMD_INIT_RX_TX); + + enable_port(); + return 0; +} + +static void cpm_serial_putc(unsigned char c) +{ + while (tbdf->sc & 0x8000) + barrier(); + + sync(); + + tbdf->addr[0] = c; + eieio(); + tbdf->sc |= 0x8000; +} + +static unsigned char cpm_serial_tstc(void) +{ + barrier(); + return !(rbdf->sc & 0x8000); +} + +static unsigned char cpm_serial_getc(void) +{ + unsigned char c; + + while (!cpm_serial_tstc()) + ; + + sync(); + c = rbdf->addr[0]; + eieio(); + rbdf->sc |= 0x8000; + + return c; +} + +int cpm_console_init(void *devp, struct serial_console_data *scdp) +{ + void *reg_virt[2]; + int is_smc = 0, is_cpm2 = 0, n; + unsigned long reg_phys; + void *parent, *muram; + + if (dt_is_compatible(devp, "fsl,cpm1-smc-uart")) { + is_smc = 1; + } else if (dt_is_compatible(devp, "fsl,cpm2-scc-uart")) { + is_cpm2 = 1; + } else if (dt_is_compatible(devp, "fsl,cpm2-smc-uart")) { + is_cpm2 = 1; + is_smc = 1; + } + + if (is_smc) { + enable_port = smc_enable_port; + disable_port = smc_disable_port; + } else { + enable_port = scc_enable_port; + disable_port = scc_disable_port; + } + + if (is_cpm2) + do_cmd = cpm2_cmd; + else + do_cmd = cpm1_cmd; + + n = getprop(devp, "fsl,cpm-command", &cpm_cmd, 4); + if (n < 4) + return -1; + + n = getprop(devp, "virtual-reg", reg_virt, sizeof(reg_virt)); + if (n < (int)sizeof(reg_virt)) { + for (n = 0; n < 2; n++) { + if (!dt_xlate_reg(devp, n, ®_phys, NULL)) + return -1; + + reg_virt[n] = (void *)reg_phys; + } + } + + if (is_smc) + smc = reg_virt[0]; + else + scc = reg_virt[0]; + + param = reg_virt[1]; + + parent = get_parent(devp); + if (!parent) + return -1; + + n = getprop(parent, "virtual-reg", reg_virt, sizeof(reg_virt)); + if (n < (int)sizeof(reg_virt)) { + if (!dt_xlate_reg(parent, 0, ®_phys, NULL)) + return -1; + + reg_virt[0] = (void *)reg_phys; + } + + cpcr = reg_virt[0]; + + muram = finddevice("/soc/cpm/muram/data"); + if (!muram) + return -1; + + /* For bootwrapper-compatible device trees, we assume that the first + * entry has at least 18 bytes, and that #address-cells/#data-cells + * is one for both parent and child. + */ + + n = getprop(muram, "virtual-reg", reg_virt, sizeof(reg_virt)); + if (n < (int)sizeof(reg_virt)) { + if (!dt_xlate_reg(muram, 0, ®_phys, NULL)) + return -1; + + reg_virt[0] = (void *)reg_phys; + } + + muram_start = reg_virt[0]; + + n = getprop(muram, "reg", &muram_offset, 4); + if (n < 4) + return -1; + + scdp->open = cpm_serial_open; + scdp->putc = cpm_serial_putc; + scdp->getc = cpm_serial_getc; + scdp->tstc = cpm_serial_tstc; + + return 0; +} diff --git a/arch/powerpc/boot/cuboot-52xx.c b/arch/powerpc/boot/cuboot-52xx.c new file mode 100644 index 0000000..9256a26 --- /dev/null +++ b/arch/powerpc/boot/cuboot-52xx.c @@ -0,0 +1,59 @@ +/* + * Old U-boot compatibility for MPC5200 + * + * Author: Grant Likely <grant.likely@secretlab.ca> + * + * Copyright (c) 2007 Secret Lab Technologies Ltd. + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "io.h" +#include "cuboot.h" + +#define TARGET_PPC_MPC52xx +#include "ppcboot.h" + +static bd_t bd; + +static void platform_fixups(void) +{ + void *soc, *reg; + int div; + u32 sysfreq; + + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_mac_addresses(bd.bi_enetaddr); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq); + + /* Unfortunately, the specific model number is encoded in the + * soc node name in existing dts files -- once that is fixed, + * this can do a simple path lookup. + */ + soc = find_node_by_devtype(NULL, "soc"); + if (soc) { + setprop(soc, "bus-frequency", &bd.bi_ipbfreq, + sizeof(bd.bi_ipbfreq)); + + if (!dt_xlate_reg(soc, 0, (void*)®, NULL)) + return; + div = in_8(reg + 0x204) & 0x0020 ? 8 : 4; + sysfreq = bd.bi_busfreq * div; + setprop(soc, "system-frequency", &sysfreq, sizeof(sysfreq)); + } +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + ft_init(_dtb_start, _dtb_end - _dtb_start, 32); + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/boot/cuboot-83xx.c b/arch/powerpc/boot/cuboot-83xx.c index 296025d..a050550 100644 --- a/arch/powerpc/boot/cuboot-83xx.c +++ b/arch/powerpc/boot/cuboot-83xx.c @@ -18,7 +18,6 @@ #include "ppcboot.h" static bd_t bd; -extern char _dtb_start[], _dtb_end[]; static void platform_fixups(void) { diff --git a/arch/powerpc/boot/cuboot-85xx.c b/arch/powerpc/boot/cuboot-85xx.c index 10f0f69..345dcbe 100644 --- a/arch/powerpc/boot/cuboot-85xx.c +++ b/arch/powerpc/boot/cuboot-85xx.c @@ -18,7 +18,6 @@ #include "ppcboot.h" static bd_t bd; -extern char _dtb_start[], _dtb_end[]; static void platform_fixups(void) { diff --git a/arch/powerpc/boot/cuboot-8xx.c b/arch/powerpc/boot/cuboot-8xx.c new file mode 100644 index 0000000..0e82015 --- /dev/null +++ b/arch/powerpc/boot/cuboot-8xx.c @@ -0,0 +1,47 @@ +/* + * Old U-boot compatibility for 8xx + * + * Author: Scott Wood <scottwood@freescale.com> + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "cuboot.h" + +#define TARGET_8xx +#define TARGET_HAS_ETH1 +#include "ppcboot.h" + +static bd_t bd; + +static void platform_fixups(void) +{ + void *node; + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 16, bd.bi_busfreq); + + node = finddevice("/soc/cpm"); + if (node) + setprop(node, "clock-frequency", &bd.bi_busfreq, 4); + + node = finddevice("/soc/cpm/brg"); + if (node) + setprop(node, "clock-frequency", &bd.bi_busfreq, 4); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + ft_init(_dtb_start, _dtb_end - _dtb_start, 32); + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/boot/cuboot-bamboo.c b/arch/powerpc/boot/cuboot-bamboo.c new file mode 100644 index 0000000..900c7ff --- /dev/null +++ b/arch/powerpc/boot/cuboot-bamboo.c @@ -0,0 +1,30 @@ +/* + * Old U-boot compatibility for Bamboo + * + * Author: Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * Copyright 2007 IBM Corporation + * + * Based on cuboot-ebony.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "44x.h" +#include "cuboot.h" + +#define TARGET_44x +#include "ppcboot.h" + +static bd_t bd; + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + bamboo_init(&bd.bi_enetaddr, &bd.bi_enet1addr); +} diff --git a/arch/powerpc/boot/cuboot-hpc2.c b/arch/powerpc/boot/cuboot-hpc2.c new file mode 100644 index 0000000..d333898 --- /dev/null +++ b/arch/powerpc/boot/cuboot-hpc2.c @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved. + * + * Author: Roy Zang <tie-fei.zang@freescale.com> + * + * Description: + * Old U-boot compatibility for mpc7448hpc2 board + * Based on the code of Scott Wood <scottwood@freescale.com> + * for 83xx and 85xx. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include "ops.h" +#include "stdio.h" +#include "cuboot.h" + +#define TARGET_HAS_ETH1 +#include "ppcboot.h" + +static bd_t bd; +extern char _dtb_start[], _dtb_end[]; + +static void platform_fixups(void) +{ + void *tsi; + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq); + tsi = find_node_by_devtype(NULL, "tsi-bridge"); + if (tsi) + setprop(tsi, "bus-frequency", &bd.bi_busfreq, + sizeof(bd.bi_busfreq)); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + ft_init(_dtb_start, _dtb_end - _dtb_start, 32); + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/boot/cuboot-pq2.c b/arch/powerpc/boot/cuboot-pq2.c new file mode 100644 index 0000000..61574f3 --- /dev/null +++ b/arch/powerpc/boot/cuboot-pq2.c @@ -0,0 +1,261 @@ +/* + * Old U-boot compatibility for PowerQUICC II + * (a.k.a. 82xx with CPM, not the 8240 family of chips) + * + * Author: Scott Wood <scottwood@freescale.com> + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "cuboot.h" +#include "io.h" +#include "fsl-soc.h" + +#define TARGET_CPM2 +#define TARGET_HAS_ETH1 +#include "ppcboot.h" + +static bd_t bd; + +struct cs_range { + u32 csnum; + u32 base; /* must be zero */ + u32 addr; + u32 size; +}; + +struct pci_range { + u32 flags; + u32 pci_addr[2]; + u32 phys_addr; + u32 size[2]; +}; + +struct cs_range cs_ranges_buf[MAX_PROP_LEN / sizeof(struct cs_range)]; +struct pci_range pci_ranges_buf[MAX_PROP_LEN / sizeof(struct pci_range)]; + +/* Different versions of u-boot put the BCSR in different places, and + * some don't set up the PCI PIC at all, so we assume the device tree is + * sane and update the BRx registers appropriately. + * + * For any node defined as compatible with fsl,pq2-localbus, + * #address/#size must be 2/1 for the localbus, and 1/1 for the parent bus. + * Ranges must be for whole chip selects. + */ +static void update_cs_ranges(void) +{ + void *bus_node, *parent_node; + u32 *ctrl_addr; + unsigned long ctrl_size; + u32 naddr, nsize; + int len; + int i; + + bus_node = finddevice("/localbus"); + if (!bus_node || !dt_is_compatible(bus_node, "fsl,pq2-localbus")) + return; + + dt_get_reg_format(bus_node, &naddr, &nsize); + if (naddr != 2 || nsize != 1) + goto err; + + parent_node = get_parent(bus_node); + if (!parent_node) + goto err; + + dt_get_reg_format(parent_node, &naddr, &nsize); + if (naddr != 1 || nsize != 1) + goto err; + + if (!dt_xlate_reg(bus_node, 0, (unsigned long *)&ctrl_addr, + &ctrl_size)) + goto err; + + len = getprop(bus_node, "ranges", cs_ranges_buf, sizeof(cs_ranges_buf)); + + for (i = 0; i < len / sizeof(struct cs_range); i++) { + u32 base, option; + int cs = cs_ranges_buf[i].csnum; + if (cs >= ctrl_size / 8) + goto err; + + if (cs_ranges_buf[i].base != 0) + goto err; + + base = in_be32(&ctrl_addr[cs * 2]); + + /* If CS is already valid, use the existing flags. + * Otherwise, guess a sane default. + */ + if (base & 1) { + base &= 0x7fff; + option = in_be32(&ctrl_addr[cs * 2 + 1]) & 0x7fff; + } else { + base = 0x1801; + option = 0x10; + } + + out_be32(&ctrl_addr[cs * 2], 0); + out_be32(&ctrl_addr[cs * 2 + 1], + option | ~(cs_ranges_buf[i].size - 1)); + out_be32(&ctrl_addr[cs * 2], base | cs_ranges_buf[i].addr); + } + + return; + +err: + printf("Bad /localbus node\r\n"); +} + +/* Older u-boots don't set PCI up properly. Update the hardware to match + * the device tree. The prefetch mem region and non-prefetch mem region + * must be contiguous in the host bus. As required by the PCI binding, + * PCI #addr/#size must be 3/2. The parent bus must be 1/1. Only + * 32-bit PCI is supported. All three region types (prefetchable mem, + * non-prefetchable mem, and I/O) must be present. + */ +static void fixup_pci(void) +{ + struct pci_range *mem = NULL, *mmio = NULL, + *io = NULL, *mem_base = NULL; + u32 *pci_regs[3]; + u8 *soc_regs; + int i, len; + void *node, *parent_node; + u32 naddr, nsize, mem_log2; + + node = finddevice("/pci"); + if (!node || !dt_is_compatible(node, "fsl,pq2-pci")) + return; + + for (i = 0; i < 3; i++) + if (!dt_xlate_reg(node, i, + (unsigned long *)&pci_regs[i], NULL)) + goto err; + + soc_regs = (u8 *)fsl_get_immr(); + if (!soc_regs) + goto err; + + dt_get_reg_format(node, &naddr, &nsize); + if (naddr != 3 || nsize != 2) + goto err; + + parent_node = get_parent(node); + if (!parent_node) + goto err; + + dt_get_reg_format(parent_node, &naddr, &nsize); + if (naddr != 1 || nsize != 1) + goto err; + + len = getprop(node, "ranges", pci_ranges_buf, + sizeof(pci_ranges_buf)); + + for (i = 0; i < len / sizeof(struct pci_range); i++) { + u32 flags = pci_ranges_buf[i].flags & 0x43000000; + + if (flags == 0x42000000) + mem = &pci_ranges_buf[i]; + else if (flags == 0x02000000) + mmio = &pci_ranges_buf[i]; + else if (flags == 0x01000000) + io = &pci_ranges_buf[i]; + } + + if (!mem || !mmio || !io) + goto err; + + if (mem->phys_addr + mem->size[1] == mmio->phys_addr) + mem_base = mem; + else if (mmio->phys_addr + mmio->size[1] == mem->phys_addr) + mem_base = mmio; + else + goto err; + + out_be32(&pci_regs[1][0], mem_base->phys_addr | 1); + out_be32(&pci_regs[2][0], ~(mem->size[1] + mmio->size[1] - 1)); + + out_be32(&pci_regs[1][1], io->phys_addr | 1); + out_be32(&pci_regs[2][1], ~(io->size[1] - 1)); + + out_le32(&pci_regs[0][0], mem->pci_addr[1] >> 12); + out_le32(&pci_regs[0][2], mem->phys_addr >> 12); + out_le32(&pci_regs[0][4], (~(mem->size[1] - 1) >> 12) | 0xa0000000); + + out_le32(&pci_regs[0][6], mmio->pci_addr[1] >> 12); + out_le32(&pci_regs[0][8], mmio->phys_addr >> 12); + out_le32(&pci_regs[0][10], (~(mmio->size[1] - 1) >> 12) | 0x80000000); + + out_le32(&pci_regs[0][12], io->pci_addr[1] >> 12); + out_le32(&pci_regs[0][14], io->phys_addr >> 12); + out_le32(&pci_regs[0][16], (~(io->size[1] - 1) >> 12) | 0xc0000000); + + /* Inbound translation */ + out_le32(&pci_regs[0][58], 0); + out_le32(&pci_regs[0][60], 0); + + mem_log2 = 1 << (__ilog2_u32(bd.bi_memsize - 1) + 1); + out_le32(&pci_regs[0][62], 0xa0000000 | ~((1 << (mem_log2 - 12)) - 1)); + + /* If PCI is disabled, drive RST high to enable. */ + if (!(in_le32(&pci_regs[0][32]) & 1)) { + /* Tpvrh (Power valid to RST# high) 100 ms */ + udelay(100000); + + out_le32(&pci_regs[0][32], 1); + + /* Trhfa (RST# high to first cfg access) 2^25 clocks */ + udelay(1020000); + } + + /* Enable bus master and memory access */ + out_le32(&pci_regs[0][64], 0x80000004); + out_le32(&pci_regs[0][65], in_le32(&pci_regs[0][65]) | 6); + + /* Park the bus on PCI, and elevate PCI's arbitration priority, + * as required by section 9.6 of the user's manual. + */ + out_8(&soc_regs[0x10028], 3); + out_be32((u32 *)&soc_regs[0x1002c], 0x01236745); + + return; + +err: + printf("Bad PCI node\r\n"); +} + +static void pq2_platform_fixups(void) +{ + void *node; + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq); + + node = finddevice("/soc/cpm"); + if (node) + setprop(node, "clock-frequency", &bd.bi_cpmfreq, 4); + + node = finddevice("/soc/cpm/brg"); + if (node) + setprop(node, "clock-frequency", &bd.bi_brgfreq, 4); + + update_cs_ranges(); + fixup_pci(); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + ft_init(_dtb_start, _dtb_end - _dtb_start, 32); + serial_console_init(); + platform_ops.fixups = pq2_platform_fixups; +} diff --git a/arch/powerpc/boot/cuboot-sequoia.c b/arch/powerpc/boot/cuboot-sequoia.c new file mode 100644 index 0000000..ec635e0 --- /dev/null +++ b/arch/powerpc/boot/cuboot-sequoia.c @@ -0,0 +1,56 @@ +/* + * Old U-boot compatibility for Sequoia + * + * Valentine Barshak <vbarshak@ru.mvista.com> + * Copyright 2007 MontaVista Software, Inc + * + * Based on Ebony code by David Gibson <david@gibson.dropbear.id.au> + * Copyright IBM Corporation, 2007 + * + * Based on Bamboo code by Josh Boyer <jwboyer@linux.vnet.ibm.com> + * Copyright IBM Corporation, 2007 + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 of the License + */ + +#include <stdarg.h> +#include <stddef.h> +#include "types.h" +#include "elf.h" +#include "string.h" +#include "stdio.h" +#include "page.h" +#include "ops.h" +#include "dcr.h" +#include "4xx.h" +#include "44x.h" +#include "cuboot.h" + +#define TARGET_4xx +#define TARGET_44x +#include "ppcboot.h" + +static bd_t bd; + + +static void sequoia_fixups(void) +{ + unsigned long sysclk = 33333333; + + ibm440ep_fixup_clocks(sysclk, 11059200); + ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); + ibm4xx_denali_fixup_memsize(); + dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + platform_ops.fixups = sequoia_fixups; + platform_ops.exit = ibm44x_dbcr_reset; + ft_init(_dtb_start, 0, 32); + serial_console_init(); +} diff --git a/arch/powerpc/boot/cuboot.c b/arch/powerpc/boot/cuboot.c index 6579546..7768b23 100644 --- a/arch/powerpc/boot/cuboot.c +++ b/arch/powerpc/boot/cuboot.c @@ -17,9 +17,6 @@ #include "ppcboot.h" -extern char _end[]; -extern char _dtb_start[], _dtb_end[]; - void cuboot_init(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, unsigned long end_of_ram) diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h index 14b44aa..83b88aa 100644 --- a/arch/powerpc/boot/dcr.h +++ b/arch/powerpc/boot/dcr.h @@ -121,4 +121,22 @@ static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR, SDRAM0_B2C #define DCRN_CPC0_MIRQ1 0x0ed #define DCRN_CPC0_JTAGID 0x0ef +#define DCRN_MAL0_CFG 0x180 +#define MAL_RESET 0x80000000 + +/* 440EP Clock/Power-on Reset regs */ +#define DCRN_CPR0_ADDR 0xc +#define DCRN_CPR0_DATA 0xd +#define CPR0_PLLD0 0x60 +#define CPR0_OPBD0 0xc0 +#define CPR0_PERD0 0xe0 +#define CPR0_PRIMBD0 0xa0 +#define CPR0_SCPID 0x120 +#define CPR0_PLLC0 0x40 + +/* 405GP Clocking/Power Management/Chip Control regs */ +#define DCRN_CPC0_PLLMR 0xb0 +#define DCRN_405_CPC0_CR0 0xb1 +#define DCRN_405_CPC0_CR1 0xb2 + #endif /* _PPC_BOOT_DCR_H_ */ diff --git a/arch/powerpc/boot/devtree.c b/arch/powerpc/boot/devtree.c index c995155..e5dfe44 100644 --- a/arch/powerpc/boot/devtree.c +++ b/arch/powerpc/boot/devtree.c @@ -74,6 +74,8 @@ void dt_fixup_cpu_clocks(u32 cpu, u32 tb, u32 bus) if (bus > 0) setprop_val(devp, "bus-frequency", bus); } + + timebase_period_ns = 1000000000 / tb; } void dt_fixup_clock(const char *path, u32 freq) @@ -86,34 +88,38 @@ void dt_fixup_clock(const char *path, u32 freq) } } +void dt_fixup_mac_address(u32 index, const u8 *addr) +{ + void *devp = find_node_by_prop_value(NULL, "linux,network-index", + (void*)&index, sizeof(index)); + + if (devp) { + printf("ENET%d: local-mac-address <-" + " %02x:%02x:%02x:%02x:%02x:%02x\n\r", index, + addr[0], addr[1], addr[2], + addr[3], addr[4], addr[5]); + + setprop(devp, "local-mac-address", addr, 6); + } +} + void __dt_fixup_mac_addresses(u32 startindex, ...) { va_list ap; u32 index = startindex; - void *devp; const u8 *addr; va_start(ap, startindex); - while ((addr = va_arg(ap, const u8 *))) { - devp = find_node_by_prop_value(NULL, "linux,network-index", - (void*)&index, sizeof(index)); - - printf("ENET%d: local-mac-address <-" - " %02x:%02x:%02x:%02x:%02x:%02x\n\r", index, - addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]); - if (devp) - setprop(devp, "local-mac-address", addr, 6); + while ((addr = va_arg(ap, const u8 *))) + dt_fixup_mac_address(index++, addr); - index++; - } va_end(ap); } #define MAX_ADDR_CELLS 4 -#define MAX_RANGES 8 -static void get_reg_format(void *node, u32 *naddr, u32 *nsize) +void dt_get_reg_format(void *node, u32 *naddr, u32 *nsize) { if (getprop(node, "#address-cells", naddr, 4) != 4) *naddr = 2; @@ -207,7 +213,7 @@ static int find_range(u32 *reg, u32 *ranges, int nregaddr, * In particular, PCI is not supported. Also, only the beginning of the * reg block is tracked; size is ignored except in ranges. */ -static u32 dt_xlate_buf[MAX_ADDR_CELLS * MAX_RANGES * 3]; +static u32 prop_buf[MAX_PROP_LEN / 4]; static int dt_xlate(void *node, int res, int reglen, unsigned long *addr, unsigned long *size) @@ -216,14 +222,14 @@ static int dt_xlate(void *node, int res, int reglen, unsigned long *addr, u32 this_addr[MAX_ADDR_CELLS]; void *parent; u64 ret_addr, ret_size; - u32 naddr, nsize, prev_naddr; + u32 naddr, nsize, prev_naddr, prev_nsize; int buflen, offset; parent = get_parent(node); if (!parent) return 0; - get_reg_format(parent, &naddr, &nsize); + dt_get_reg_format(parent, &naddr, &nsize); if (nsize > 2) return 0; @@ -231,41 +237,47 @@ static int dt_xlate(void *node, int res, int reglen, unsigned long *addr, offset = (naddr + nsize) * res; if (reglen < offset + naddr + nsize || - sizeof(dt_xlate_buf) < offset + naddr + nsize) + MAX_PROP_LEN < (offset + naddr + nsize) * 4) return 0; - copy_val(last_addr, dt_xlate_buf + offset, naddr); + copy_val(last_addr, prop_buf + offset, naddr); - ret_size = dt_xlate_buf[offset + naddr]; + ret_size = prop_buf[offset + naddr]; if (nsize == 2) { ret_size <<= 32; - ret_size |= dt_xlate_buf[offset + naddr + 1]; + ret_size |= prop_buf[offset + naddr + 1]; } - while ((node = get_parent(node))) { + for (;;) { prev_naddr = naddr; + prev_nsize = nsize; + node = parent; + + parent = get_parent(node); + if (!parent) + break; - get_reg_format(node, &naddr, &nsize); + dt_get_reg_format(parent, &naddr, &nsize); - buflen = getprop(node, "ranges", dt_xlate_buf, - sizeof(dt_xlate_buf)); - if (buflen < 0) + buflen = getprop(node, "ranges", prop_buf, + sizeof(prop_buf)); + if (buflen == 0) continue; - if (buflen > sizeof(dt_xlate_buf)) + if (buflen < 0 || buflen > sizeof(prop_buf)) return 0; - offset = find_range(last_addr, dt_xlate_buf, prev_naddr, - naddr, nsize, buflen / 4); + offset = find_range(last_addr, prop_buf, prev_naddr, + naddr, prev_nsize, buflen / 4); if (offset < 0) return 0; - copy_val(this_addr, dt_xlate_buf + offset, prev_naddr); + copy_val(this_addr, prop_buf + offset, prev_naddr); if (!sub_reg(last_addr, this_addr)) return 0; - copy_val(this_addr, dt_xlate_buf + offset + prev_naddr, naddr); + copy_val(this_addr, prop_buf + offset + prev_naddr, naddr); if (!add_reg(last_addr, this_addr, naddr)) return 0; @@ -292,16 +304,35 @@ int dt_xlate_reg(void *node, int res, unsigned long *addr, unsigned long *size) { int reglen; - reglen = getprop(node, "reg", dt_xlate_buf, sizeof(dt_xlate_buf)) / 4; + reglen = getprop(node, "reg", prop_buf, sizeof(prop_buf)) / 4; return dt_xlate(node, res, reglen, addr, size); } int dt_xlate_addr(void *node, u32 *buf, int buflen, unsigned long *xlated_addr) { - if (buflen > sizeof(dt_xlate_buf)) + if (buflen > sizeof(prop_buf)) return 0; - memcpy(dt_xlate_buf, buf, buflen); + memcpy(prop_buf, buf, buflen); return dt_xlate(node, 0, buflen / 4, xlated_addr, NULL); } + +int dt_is_compatible(void *node, const char *compat) +{ + char *buf = (char *)prop_buf; + int len, pos; + + len = getprop(node, "compatible", buf, MAX_PROP_LEN); + if (len < 0) + return 0; + + for (pos = 0; pos < len; pos++) { + if (!strcmp(buf + pos, compat)) + return 1; + + pos += strnlen(&buf[pos], len - pos); + } + + return 0; +} diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts new file mode 100644 index 0000000..a88ae3d --- /dev/null +++ b/arch/powerpc/boot/dts/bamboo.dts @@ -0,0 +1,244 @@ +/* + * Device Tree Source for AMCC Bamboo + * + * Copyright (c) 2006, 2007 IBM Corp. + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * FIXME: Draft only! + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,bamboo"; + compatible = "amcc,bamboo"; + dcr-parent = <&/cpus/PowerPC,440EP@0>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,440EP@0 { + device_type = "cpu"; + reg = <0>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <8000>; + d-cache-size = <8000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440ep"; + dcr-reg = <00e 002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440ep"; + dcr-reg = <00c 002>; + }; + + plb { + compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440ep", "ibm,sdram-405gp"; + dcr-reg = <010 2>; + }; + + DMA0: dma { + compatible = "ibm,dma-440ep", "ibm,dma-440gp"; + dcr-reg = <100 027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal"; + dcr-reg = <180 62>; + num-tx-chans = <4>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + #interrupt-cells = <1>; + interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 + /*RXEOB*/ 1 &UIC0 b 4 + /*SERR*/ 2 &UIC1 0 4 + /*TXDE*/ 3 &UIC1 1 4 + /*RXDE*/ 4 &UIC1 3 4>; + }; + + POB0: opb { + compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Bamboo is oddball in the 44x world and doesn't use the ERPN + * bits. + */ + ranges = <00000000 0 00000000 80000000 + 80000000 0 80000000 80000000>; + interrupt-parent = <&UIC1>; + interrupts = <7 4>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + ranges; + interrupts = <5 1>; + interrupt-parent = <&UIC1>; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <1c200>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600400 8>; + virtual-reg = <ef600400>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600500 8>; + virtual-reg = <ef600500>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <3 4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600600 8>; + virtual-reg = <ef600600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <4 4>; + }; + + IIC0: i2c@ef600700 { + device_type = "i2c"; + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + reg = <ef600700 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@ef600800 { + device_type = "i2c"; + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + reg = <ef600800 14>; + interrupt-parent = <&UIC0>; + interrupts = <7 4>; + }; + + ZMII0: emac-zmii@ef600d00 { + device_type = "zmii-interface"; + compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii"; + reg = <ef600d00 c>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <1c 4 1d 4>; + reg = <ef600e00 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0 1>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000001>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <1e 4 1f 4>; + reg = <ef600f00 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <2 3>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000001>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + }; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + bootargs = "console=ttyS0,115200"; + }; +}; diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts index c5f9961..bc25997 100644 --- a/arch/powerpc/boot/dts/ebony.dts +++ b/arch/powerpc/boot/dts/ebony.dts @@ -9,10 +9,6 @@ * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without * any warranty of any kind, whether express or implied. - * - * To build: - * dtc -I dts -O asm -o ebony.S -b 0 ebony.dts - * dtc -I dts -O dtb -o ebony.dtb -b 0 ebony.dts */ / { @@ -142,13 +138,16 @@ interrupt-parent = <&UIC1>; small-flash@0,80000 { - device_type = "rom"; - compatible = "direct-mapped"; - probe-type = "JEDEC"; + compatible = "jedec-flash"; bank-width = <1>; - partitions = <0 80000>; - partition-names = "OpenBIOS"; reg = <0 80000 80000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "OpenBIOS"; + reg = <0 80000>; + read-only; + }; }; ds1743@1,0 { @@ -158,14 +157,19 @@ }; large-flash@2,0 { - device_type = "rom"; - compatible = "direct-mapped"; - probe-type = "JEDEC"; + compatible = "jedec-flash"; bank-width = <1>; - partitions = <0 380000 - 380000 80000>; - partition-names = "fs", "firmware"; reg = <2 0 400000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "fs"; + reg = <0 380000>; + }; + partition@380000 { + label = "firmware"; + reg = <380000 80000>; + }; }; ir@3,0 { @@ -175,6 +179,7 @@ fpga@7,0 { compatible = "Ebony-FPGA"; reg = <7 0 10>; + virtual-reg = <e8300000>; }; }; diff --git a/arch/powerpc/boot/dts/ep88xc.dts b/arch/powerpc/boot/dts/ep88xc.dts new file mode 100644 index 0000000..02705f2 --- /dev/null +++ b/arch/powerpc/boot/dts/ep88xc.dts @@ -0,0 +1,214 @@ +/* + * EP88xC Device Tree Source + * + * Copyright 2006 MontaVista Software, Inc. + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "EP88xC"; + compatible = "fsl,ep88xc"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,885@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <d#16>; + i-cache-line-size = <d#16>; + d-cache-size = <d#8192>; + i-cache-size = <d#8192>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + interrupts = <f 2>; // decrementer interrupt + interrupt-parent = <&PIC>; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; + }; + + localbus@fa200100 { + compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <fa200100 40>; + + ranges = < + 0 0 fc000000 04000000 + 3 0 fa000000 01000000 + >; + + flash@0,2000000 { + compatible = "cfi-flash"; + reg = <0 2000000 2000000>; + bank-width = <4>; + device-width = <2>; + }; + + board-control@3,400000 { + reg = <3 400000 10>; + compatible = "fsl,ep88xc-bcsr"; + }; + }; + + soc@fa200000 { + compatible = "fsl,mpc885", "fsl,pq1-soc"; + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0 fa200000 00004000>; + bus-frequency = <0>; + + // Temporary -- will go away once kernel uses ranges for get_immrbase(). + reg = <fa200000 4000>; + + mdio@e00 { + compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio"; + reg = <e00 188>; + #address-cells = <1>; + #size-cells = <0>; + + PHY0: ethernet-phy@0 { + reg = <0>; + device_type = "ethernet-phy"; + }; + + PHY1: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@e00 { + device_type = "network"; + compatible = "fsl,mpc885-fec-enet", + "fsl,pq1-fec-enet"; + reg = <e00 188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <3 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; + }; + + ethernet@1e00 { + device_type = "network"; + compatible = "fsl,mpc885-fec-enet", + "fsl,pq1-fec-enet"; + reg = <1e00 188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <7 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; + }; + + PIC: interrupt-controller@0 { + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 24>; + compatible = "fsl,mpc885-pic", "fsl,pq1-pic"; + }; + + pcmcia@80 { + #address-cells = <3>; + #interrupt-cells = <1>; + #size-cells = <2>; + compatible = "fsl,pq-pcmcia"; + device_type = "pcmcia"; + reg = <80 80>; + interrupt-parent = <&PIC>; + interrupts = <d 1>; + }; + + cpm@9c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc885-cpm", "fsl,cpm1"; + command-proc = <9c0>; + interrupts = <0>; // cpm error interrupt + interrupt-parent = <&CPM_PIC>; + reg = <9c0 40>; + ranges; + + muram@2000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 2000 2000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 1c00>; + }; + }; + + brg@9f0 { + compatible = "fsl,mpc885-brg", + "fsl,cpm1-brg", + "fsl,cpm-brg"; + reg = <9f0 10>; + }; + + CPM_PIC: interrupt-controller@930 { + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <5 2 0 2>; + interrupt-parent = <&PIC>; + reg = <930 20>; + compatible = "fsl,mpc885-cpm-pic", + "fsl,cpm1-pic"; + }; + + // MON-1 + serial@a80 { + device_type = "serial"; + compatible = "fsl,mpc885-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <a80 10 3e80 40>; + interrupts = <4>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0090>; + linux,planetcore-label = "SMC1"; + }; + + // SER-1 + serial@a20 { + device_type = "serial"; + compatible = "fsl,mpc885-scc-uart", + "fsl,cpm1-scc-uart"; + reg = <a20 20 3d00 80>; + interrupts = <1d>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <0040>; + linux,planetcore-label = "SCC2"; + }; + + usb@a00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc885-usb", + "fsl,cpm1-usb"; + reg = <a00 18 1c00 80>; + interrupt-parent = <&CPM_PIC>; + interrupts = <1e>; + fsl,cpm-command = <0000>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/holly.dts b/arch/powerpc/boot/dts/holly.dts index 80a4fab..b5d8789 100644 --- a/arch/powerpc/boot/dts/holly.dts +++ b/arch/powerpc/boot/dts/holly.dts @@ -8,10 +8,6 @@ * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without * any warranty of any kind, whether express or implied. - * - * To build: - * dtc -I dts -O asm -o holly.S -b 0 holly.dts - * dtc -I dts -O dtb -o holly.dtb -b 0 holly.dts */ / { @@ -35,7 +31,6 @@ timebase-frequency = <2faf080>; clock-frequency = <23c34600>; bus-frequency = <bebc200>; - 32-bit; }; }; diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts new file mode 100644 index 0000000..c824e8f --- /dev/null +++ b/arch/powerpc/boot/dts/kilauea.dts @@ -0,0 +1,252 @@ +/* + * Device Tree Source for AMCC Kilauea (405EX) + * + * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "amcc,kilauea"; + compatible = "amcc,kilauea"; + dcr-parent = <&/cpus/PowerPC,405EX@0>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,405EX@0 { + device_type = "cpu"; + reg = <0>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <4000>; /* 16 kB */ + d-cache-size = <4000>; /* 16 kB */ + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic-405ex", "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-405ex","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-405ex","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0e0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1c 4 1d 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + plb { + compatible = "ibm,plb-405ex", "ibm,plb4"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-405ex"; + dcr-reg = <010 2>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; + dcr-reg = <180 62>; + num-tx-chans = <2>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 + /*RXEOB*/ 1 &UIC0 b 4 + /*SERR*/ 2 &UIC1 0 4 + /*TXDE*/ 3 &UIC1 1 4 + /*RXDE*/ 4 &UIC1 2 4>; + interrupt-map-mask = <ffffffff>; + }; + + POB0: opb { + compatible = "ibm,opb-405ex", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <80000000 80000000 10000000 + ef600000 ef600000 a00000 + f0000000 f0000000 10000000>; + dcr-reg = <0a0 5>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-405ex", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <5 1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0 000000 4000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0 200000>; + }; + partition@200000 { + label = "root"; + reg = <200000 200000>; + }; + partition@400000 { + label = "user"; + reg = <400000 3b60000>; + }; + partition@3f60000 { + label = "env"; + reg = <3f60000 40000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <3fa0000 60000>; + }; + }; + }; + + UART0: serial@ef600200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600200 8>; + virtual-reg = <ef600200>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1a 4>; + }; + + UART1: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + IIC0: i2c@ef600400 { + device_type = "i2c"; + compatible = "ibm,iic-405ex", "ibm,iic"; + reg = <ef600400 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@ef600500 { + device_type = "i2c"; + compatible = "ibm,iic-405ex", "ibm,iic"; + reg = <ef600500 14>; + interrupt-parent = <&UIC0>; + interrupts = <7 4>; + }; + + + RGMII0: emac-rgmii@ef600b00 { + device_type = "rgmii-interface"; + compatible = "ibm,rgmii-405ex", "ibm,rgmii"; + reg = <ef600b00 104>; + }; + + EMAC0: ethernet@ef600900 { + linux,network-index = <0>; + device_type = "network"; + compatible = "ibm,emac-405ex", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC0 18 4 + /*Wake*/ 1 &UIC1 1d 4>; + reg = <ef600900 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + }; + + EMAC1: ethernet@ef600a00 { + linux,network-index = <1>; + device_type = "network"; + compatible = "ibm,emac-405ex", "ibm,emac4"; + interrupt-parent = <&EMAC1>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC0 19 4 + /*Wake*/ 1 &UIC1 1f 4>; + reg = <ef600a00 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts index 1225374..ec71ab8 100644 --- a/arch/powerpc/boot/dts/kuroboxHD.dts +++ b/arch/powerpc/boot/dts/kuroboxHD.dts @@ -15,9 +15,6 @@ XXXX add flash parts, rtc, ?? -build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts" - - */ / { @@ -50,7 +47,6 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts" soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */ #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; compatible = "mpc10x"; store-gathering = <0>; /* 0 == off, !0 == on */ @@ -72,7 +68,7 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts" rtc@32 { device_type = "rtc"; - compatible = "ricoh,rs5c372b"; + compatible = "ricoh,rs5c372a"; reg = <32>; }; }; @@ -83,7 +79,7 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts" reg = <80004500 8>; clock-frequency = <5d08d88>; current-speed = <2580>; - interrupts = <9 2>; + interrupts = <9 0>; interrupt-parent = <&mpic>; }; @@ -104,7 +100,6 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts" compatible = "chrp,open-pic"; interrupt-controller; reg = <80040000 40000>; - built-in; }; pci@fec00000 { diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts index 579aa8b..32ecd23 100644 --- a/arch/powerpc/boot/dts/kuroboxHG.dts +++ b/arch/powerpc/boot/dts/kuroboxHG.dts @@ -15,9 +15,6 @@ XXXX add flash parts, rtc, ?? -build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts" - - */ / { @@ -50,7 +47,6 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts" soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */ #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; compatible = "mpc10x"; store-gathering = <0>; /* 0 == off, !0 == on */ @@ -72,7 +68,7 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts" rtc@32 { device_type = "rtc"; - compatible = "ricoh,rs5c372b"; + compatible = "ricoh,rs5c372a"; reg = <32>; }; }; @@ -83,7 +79,7 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts" reg = <80004500 8>; clock-frequency = <7c044a8>; current-speed = <2580>; - interrupts = <9 2>; + interrupts = <9 0>; interrupt-parent = <&mpic>; }; @@ -104,7 +100,6 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts" compatible = "chrp,open-pic"; interrupt-controller; reg = <80040000 40000>; - built-in; }; pci@fec00000 { diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts index d29308f..bc45f5f 100644 --- a/arch/powerpc/boot/dts/lite5200.dts +++ b/arch/powerpc/boot/dts/lite5200.dts @@ -19,7 +19,7 @@ / { model = "fsl,lite5200"; // revision = "1.0"; - compatible = "fsl,lite5200\0generic-mpc5200"; + compatible = "fsl,lite5200","generic-mpc5200"; #address-cells = <1>; #size-cells = <1>; @@ -37,7 +37,6 @@ timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader - 32-bit; }; }; @@ -50,10 +49,9 @@ model = "fsl,mpc5200"; compatible = "mpc5200"; revision = ""; // from bootloader - #interrupt-cells = <3>; device_type = "soc"; - ranges = <0 f0000000 f0010000>; - reg = <f0000000 00010000>; + ranges = <0 f0000000 0000c000>; + reg = <f0000000 00000100>; bus-frequency = <0>; // from bootloader system-frequency = <0>; // from bootloader @@ -69,7 +67,6 @@ device_type = "interrupt-controller"; compatible = "mpc5200-pic"; reg = <500 80>; - built-in; }; gpt@600 { // General Purpose Timer @@ -185,27 +182,6 @@ interrupt-parent = <&mpc5200_pic>; }; - pci@0d00 { - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - compatible = "mpc5200-pci"; - reg = <d00 100>; - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 - c000 0 0 2 &mpc5200_pic 0 0 3 - c000 0 0 3 &mpc5200_pic 0 0 3 - c000 0 0 4 &mpc5200_pic 0 0 3>; - clock-frequency = <0>; // From boot loader - interrupts = <2 8 0 2 9 0 2 a 0>; - interrupt-parent = <&mpc5200_pic>; - bus-range = <0 0>; - ranges = <42000000 0 80000000 80000000 0 20000000 - 02000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 b0000000 0 01000000>; - }; - spi@f00 { device_type = "spi"; compatible = "mpc5200-spi"; @@ -216,7 +192,7 @@ usb@1000 { device_type = "usb-ohci-be"; - compatible = "mpc5200-ohci\0ohci-be"; + compatible = "mpc5200-ohci","ohci-be"; reg = <1000 ff>; interrupts = <2 6 0>; interrupt-parent = <&mpc5200_pic>; @@ -317,7 +293,7 @@ i2c@3d00 { device_type = "i2c"; - compatible = "mpc5200-i2c\0fsl-i2c"; + compatible = "mpc5200-i2c","fsl-i2c"; cell-index = <0>; reg = <3d00 40>; interrupts = <2 f 0>; @@ -327,7 +303,7 @@ i2c@3d40 { device_type = "i2c"; - compatible = "mpc5200-i2c\0fsl-i2c"; + compatible = "mpc5200-i2c","fsl-i2c"; cell-index = <1>; reg = <3d40 40>; interrupts = <2 10 0>; @@ -336,8 +312,29 @@ }; sram@8000 { device_type = "sram"; - compatible = "mpc5200-sram\0sram"; + compatible = "mpc5200-sram","sram"; reg = <8000 4000>; }; }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "mpc5200-pci"; + reg = <f0000d00 100>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 + c000 0 0 2 &mpc5200_pic 0 0 3 + c000 0 0 3 &mpc5200_pic 0 0 3 + c000 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 a 0>; + interrupt-parent = <&mpc5200_pic>; + bus-range = <0 0>; + ranges = <42000000 0 80000000 80000000 0 20000000 + 02000000 0 a0000000 a0000000 0 10000000 + 01000000 0 00000000 b0000000 0 01000000>; + }; }; diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index f242531..a6bb1d0 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -19,7 +19,7 @@ / { model = "fsl,lite5200b"; // revision = "1.0"; - compatible = "fsl,lite5200b\0generic-mpc5200"; + compatible = "fsl,lite5200b","generic-mpc5200"; #address-cells = <1>; #size-cells = <1>; @@ -37,7 +37,6 @@ timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader - 32-bit; }; }; @@ -50,15 +49,14 @@ model = "fsl,mpc5200b"; compatible = "mpc5200"; revision = ""; // from bootloader - #interrupt-cells = <3>; device_type = "soc"; - ranges = <0 f0000000 f0010000>; - reg = <f0000000 00010000>; + ranges = <0 f0000000 0000c000>; + reg = <f0000000 00000100>; bus-frequency = <0>; // from bootloader system-frequency = <0>; // from bootloader cdm@200 { - compatible = "mpc5200b-cdm\0mpc5200-cdm"; + compatible = "mpc5200b-cdm","mpc5200-cdm"; reg = <200 38>; }; @@ -67,13 +65,12 @@ interrupt-controller; #interrupt-cells = <3>; device_type = "interrupt-controller"; - compatible = "mpc5200b-pic\0mpc5200-pic"; + compatible = "mpc5200b-pic","mpc5200-pic"; reg = <500 80>; - built-in; }; gpt@600 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc5200-gpt"; + compatible = "mpc5200b-gpt","mpc5200-gpt"; device_type = "gpt"; cell-index = <0>; reg = <600 10>; @@ -83,7 +80,7 @@ }; gpt@610 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc5200-gpt"; + compatible = "mpc5200b-gpt","mpc5200-gpt"; device_type = "gpt"; cell-index = <1>; reg = <610 10>; @@ -92,7 +89,7 @@ }; gpt@620 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc5200-gpt"; + compatible = "mpc5200b-gpt","mpc5200-gpt"; device_type = "gpt"; cell-index = <2>; reg = <620 10>; @@ -101,7 +98,7 @@ }; gpt@630 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc5200-gpt"; + compatible = "mpc5200b-gpt","mpc5200-gpt"; device_type = "gpt"; cell-index = <3>; reg = <630 10>; @@ -110,7 +107,7 @@ }; gpt@640 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc5200-gpt"; + compatible = "mpc5200b-gpt","mpc5200-gpt"; device_type = "gpt"; cell-index = <4>; reg = <640 10>; @@ -119,7 +116,7 @@ }; gpt@650 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc5200-gpt"; + compatible = "mpc5200b-gpt","mpc5200-gpt"; device_type = "gpt"; cell-index = <5>; reg = <650 10>; @@ -128,7 +125,7 @@ }; gpt@660 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc5200-gpt"; + compatible = "mpc5200b-gpt","mpc5200-gpt"; device_type = "gpt"; cell-index = <6>; reg = <660 10>; @@ -137,7 +134,7 @@ }; gpt@670 { // General Purpose Timer - compatible = "mpc5200b-gpt\0mpc5200-gpt"; + compatible = "mpc5200b-gpt","mpc5200-gpt"; device_type = "gpt"; cell-index = <7>; reg = <670 10>; @@ -146,7 +143,7 @@ }; rtc@800 { // Real time clock - compatible = "mpc5200b-rtc\0mpc5200-rtc"; + compatible = "mpc5200b-rtc","mpc5200-rtc"; device_type = "rtc"; reg = <800 100>; interrupts = <1 5 0 1 6 0>; @@ -155,7 +152,7 @@ mscan@900 { device_type = "mscan"; - compatible = "mpc5200b-mscan\0mpc5200-mscan"; + compatible = "mpc5200b-mscan","mpc5200-mscan"; cell-index = <0>; interrupts = <2 11 0>; interrupt-parent = <&mpc5200_pic>; @@ -164,7 +161,7 @@ mscan@980 { device_type = "mscan"; - compatible = "mpc5200b-mscan\0mpc5200-mscan"; + compatible = "mpc5200b-mscan","mpc5200-mscan"; cell-index = <1>; interrupts = <2 12 0>; interrupt-parent = <&mpc5200_pic>; @@ -172,48 +169,22 @@ }; gpio@b00 { - compatible = "mpc5200b-gpio\0mpc5200-gpio"; + compatible = "mpc5200b-gpio","mpc5200-gpio"; reg = <b00 40>; interrupts = <1 7 0>; interrupt-parent = <&mpc5200_pic>; }; gpio-wkup@c00 { - compatible = "mpc5200b-gpio-wkup\0mpc5200-gpio-wkup"; + compatible = "mpc5200b-gpio-wkup","mpc5200-gpio-wkup"; reg = <c00 40>; interrupts = <1 8 0 0 3 0>; interrupt-parent = <&mpc5200_pic>; }; - pci@0d00 { - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - compatible = "mpc5200b-pci\0mpc5200-pci"; - reg = <d00 100>; - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot - c000 0 0 2 &mpc5200_pic 1 1 3 - c000 0 0 3 &mpc5200_pic 1 2 3 - c000 0 0 4 &mpc5200_pic 1 3 3 - - c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot - c800 0 0 2 &mpc5200_pic 1 2 3 - c800 0 0 3 &mpc5200_pic 1 3 3 - c800 0 0 4 &mpc5200_pic 0 0 3>; - clock-frequency = <0>; // From boot loader - interrupts = <2 8 0 2 9 0 2 a 0>; - interrupt-parent = <&mpc5200_pic>; - bus-range = <0 0>; - ranges = <42000000 0 80000000 80000000 0 20000000 - 02000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 b0000000 0 01000000>; - }; - spi@f00 { device_type = "spi"; - compatible = "mpc5200b-spi\0mpc5200-spi"; + compatible = "mpc5200b-spi","mpc5200-spi"; reg = <f00 20>; interrupts = <2 d 0 2 e 0>; interrupt-parent = <&mpc5200_pic>; @@ -221,7 +192,7 @@ usb@1000 { device_type = "usb-ohci-be"; - compatible = "mpc5200b-ohci\0mpc5200-ohci\0ohci-be"; + compatible = "mpc5200b-ohci","mpc5200-ohci","ohci-be"; reg = <1000 ff>; interrupts = <2 6 0>; interrupt-parent = <&mpc5200_pic>; @@ -229,7 +200,7 @@ bestcomm@1200 { device_type = "dma-controller"; - compatible = "mpc5200b-bestcomm\0mpc5200-bestcomm"; + compatible = "mpc5200b-bestcomm","mpc5200-bestcomm"; reg = <1200 80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 @@ -239,13 +210,13 @@ }; xlb@1f00 { - compatible = "mpc5200b-xlb\0mpc5200-xlb"; + compatible = "mpc5200b-xlb","mpc5200-xlb"; reg = <1f00 100>; }; serial@2000 { // PSC1 device_type = "serial"; - compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart"; + compatible = "mpc5200b-psc-uart","mpc5200-psc-uart"; port-number = <0>; // Logical port assignment cell-index = <0>; reg = <2000 100>; @@ -256,7 +227,7 @@ // PSC2 in ac97 mode example //ac97@2200 { // PSC2 // device_type = "sound"; - // compatible = "mpc5200b-psc-ac97\0mpc5200-psc-ac97"; + // compatible = "mpc5200b-psc-ac97","mpc5200-psc-ac97"; // cell-index = <1>; // reg = <2200 100>; // interrupts = <2 2 0>; @@ -276,7 +247,7 @@ // PSC4 in uart mode example //serial@2600 { // PSC4 // device_type = "serial"; - // compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart"; + // compatible = "mpc5200b-psc-uart","mpc5200-psc-uart"; // cell-index = <3>; // reg = <2600 100>; // interrupts = <2 b 0>; @@ -286,7 +257,7 @@ // PSC5 in uart mode example //serial@2800 { // PSC5 // device_type = "serial"; - // compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart"; + // compatible = "mpc5200b-psc-uart","mpc5200-psc-uart"; // cell-index = <4>; // reg = <2800 100>; // interrupts = <2 c 0>; @@ -296,7 +267,7 @@ // PSC6 in spi mode example //spi@2c00 { // PSC6 // device_type = "spi"; - // compatible = "mpc5200b-psc-spi\0mpc5200-psc-spi"; + // compatible = "mpc5200b-psc-spi","mpc5200-psc-spi"; // cell-index = <5>; // reg = <2c00 100>; // interrupts = <2 4 0>; @@ -305,7 +276,7 @@ ethernet@3000 { device_type = "network"; - compatible = "mpc5200b-fec\0mpc5200-fec"; + compatible = "mpc5200b-fec","mpc5200-fec"; reg = <3000 800>; mac-address = [ 02 03 04 05 06 07 ]; // Bad! interrupts = <2 5 0>; @@ -314,7 +285,7 @@ ata@3a00 { device_type = "ata"; - compatible = "mpc5200b-ata\0mpc5200-ata"; + compatible = "mpc5200b-ata","mpc5200-ata"; reg = <3a00 100>; interrupts = <2 7 0>; interrupt-parent = <&mpc5200_pic>; @@ -322,7 +293,7 @@ i2c@3d00 { device_type = "i2c"; - compatible = "mpc5200b-i2c\0mpc5200-i2c\0fsl-i2c"; + compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c"; cell-index = <0>; reg = <3d00 40>; interrupts = <2 f 0>; @@ -332,7 +303,7 @@ i2c@3d40 { device_type = "i2c"; - compatible = "mpc5200b-i2c\0mpc5200-i2c\0fsl-i2c"; + compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c"; cell-index = <1>; reg = <3d40 40>; interrupts = <2 10 0>; @@ -341,8 +312,34 @@ }; sram@8000 { device_type = "sram"; - compatible = "mpc5200b-sram\0mpc5200-sram\0sram"; + compatible = "mpc5200b-sram","mpc5200-sram","sram"; reg = <8000 4000>; }; }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "mpc5200b-pci","mpc5200-pci"; + reg = <f0000d00 100>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot + c000 0 0 2 &mpc5200_pic 1 1 3 + c000 0 0 3 &mpc5200_pic 1 2 3 + c000 0 0 4 &mpc5200_pic 1 3 3 + + c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot + c800 0 0 2 &mpc5200_pic 1 2 3 + c800 0 0 3 &mpc5200_pic 1 3 3 + c800 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 a 0>; + interrupt-parent = <&mpc5200_pic>; + bus-range = <0 0>; + ranges = <42000000 0 80000000 80000000 0 20000000 + 02000000 0 a0000000 a0000000 0 10000000 + 01000000 0 00000000 b0000000 0 01000000>; + }; }; diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts index b9158eb..8fb5423 100644 --- a/arch/powerpc/boot/dts/mpc7448hpc2.dts +++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts @@ -31,7 +31,6 @@ timebase-frequency = <0>; // 33 MHz, from uboot clock-frequency = <0>; // From U-Boot bus-frequency = <0>; // From U-Boot - 32-bit; }; }; @@ -44,7 +43,6 @@ tsi108@c0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "tsi-bridge"; ranges = <00000000 c0000000 00010000>; reg = <c0000000 00010000>; @@ -80,6 +78,7 @@ }; ethernet@6200 { + linux,network-index = <0>; #size-cells = <0>; device_type = "network"; compatible = "tsi108-ethernet"; @@ -92,6 +91,7 @@ }; ethernet@6600 { + linux,network-index = <1>; #address-cells = <1>; #size-cells = <0>; device_type = "network"; @@ -128,7 +128,6 @@ #address-cells = <0>; #interrupt-cells = <2>; reg = <7400 400>; - built-in; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; @@ -180,12 +179,14 @@ device_type = "pic-router"; #address-cells = <0>; #interrupt-cells = <2>; - built-in; big-endian; interrupts = <17 2>; interrupt-parent = <&mpic>; }; }; }; + chosen { + linux,stdout-path = "/tsi108@c0000000/serial@7808"; + }; }; diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts index 1934b80..7285ca1 100644 --- a/arch/powerpc/boot/dts/mpc8272ads.dts +++ b/arch/powerpc/boot/dts/mpc8272ads.dts @@ -10,207 +10,240 @@ */ / { - model = "MPC8272ADS"; - compatible = "MPC8260ADS"; - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8272@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <4000>; // L1, 16K - i-cache-size = <4000>; // L1, 16K - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - 32-bit; - }; - }; - - pci_pic: interrupt-controller@f8200000 { - #address-cells = <0>; - #interrupt-cells = <2>; - interrupt-controller; - reg = <f8200000 f8200004>; - built-in; - device_type = "pci-pic"; - }; - memory { - device_type = "memory"; - reg = <00000000 4000000 f4500000 00000020>; - }; - - chosen { - name = "chosen"; - linux,platform = <0>; - interrupt-controller = <&Cpm_pic>; - }; - - soc8272@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "soc"; - ranges = <00000000 f0000000 00053000>; - reg = <f0000000 10000>; - - mdio@0 { - device_type = "mdio"; - compatible = "fs_enet"; - reg = <0 0>; - #address-cells = <1>; - #size-cells = <0>; - phy0:ethernet-phy@0 { - interrupt-parent = <&Cpm_pic>; - interrupts = <17 4>; - reg = <0>; - bitbang = [ 12 12 13 02 02 01 ]; - device_type = "ethernet-phy"; - }; - phy1:ethernet-phy@1 { - interrupt-parent = <&Cpm_pic>; - interrupts = <17 4>; - bitbang = [ 12 12 13 02 02 01 ]; - reg = <3>; - device_type = "ethernet-phy"; - }; - }; - - ethernet@24000 { - #address-cells = <1>; - #size-cells = <0>; - device_type = "network"; - device-id = <1>; - compatible = "fs_enet"; - model = "FCC"; - reg = <11300 20 8400 100 11380 30>; - mac-address = [ 00 11 2F 99 43 54 ]; - interrupts = <20 2>; - interrupt-parent = <&Cpm_pic>; - phy-handle = <&Phy0>; - rx-clock = <13>; - tx-clock = <12>; - }; - - ethernet@25000 { - device_type = "network"; - device-id = <2>; - compatible = "fs_enet"; - model = "FCC"; - reg = <11320 20 8500 100 113b0 30>; - mac-address = [ 00 11 2F 99 44 54 ]; - interrupts = <21 2>; - interrupt-parent = <&Cpm_pic>; - phy-handle = <&Phy1>; - rx-clock = <17>; - tx-clock = <18>; - }; - - cpm@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "cpm"; - model = "CPM2"; - ranges = <00000000 00000000 20000>; - reg = <0 20000>; - command-proc = <119c0>; - brg-frequency = <17D7840>; - cpm_clk = <BEBC200>; - - scc@11a00 { - device_type = "serial"; - compatible = "cpm_uart"; - model = "SCC"; - device-id = <1>; - reg = <11a00 20 8000 100>; - current-speed = <1c200>; - interrupts = <28 2>; - interrupt-parent = <&Cpm_pic>; - clock-setup = <0 00ffffff>; - rx-clock = <1>; - tx-clock = <1>; - }; - - scc@11a60 { - device_type = "serial"; - compatible = "cpm_uart"; - model = "SCC"; - device-id = <4>; - reg = <11a60 20 8300 100>; - current-speed = <1c200>; - interrupts = <2b 2>; - interrupt-parent = <&Cpm_pic>; - clock-setup = <1b ffffff00>; - rx-clock = <4>; - tx-clock = <4>; - }; - - }; - cpm_pic:interrupt-controller@10c00 { - #address-cells = <0>; - #interrupt-cells = <2>; - interrupt-controller; - reg = <10c00 80>; - built-in; - device_type = "cpm-pic"; - compatible = "CPM2"; - }; - pci@0500 { - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "8272"; - device_type = "pci"; - reg = <10430 4dc>; - clock-frequency = <3f940aa>; - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x16 */ - b000 0 0 1 f8200000 40 8 - b000 0 0 2 f8200000 41 8 - b000 0 0 3 f8200000 42 8 - b000 0 0 4 f8200000 43 8 - - /* IDSEL 0x17 */ - b800 0 0 1 f8200000 43 8 - b800 0 0 2 f8200000 40 8 - b800 0 0 3 f8200000 41 8 - b800 0 0 4 f8200000 42 8 - - /* IDSEL 0x18 */ - c000 0 0 1 f8200000 42 8 - c000 0 0 2 f8200000 43 8 - c000 0 0 3 f8200000 40 8 - c000 0 0 4 f8200000 41 8>; - interrupt-parent = <&Cpm_pic>; - interrupts = <14 8>; - bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 40000000 - 01000000 0 00000000 f6000000 0 02000000>; - }; + model = "MPC8272ADS"; + compatible = "fsl,mpc8272ads"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8272@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <d#32>; + i-cache-line-size = <d#32>; + d-cache-size = <d#16384>; + i-cache-size = <d#16384>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; + }; + + localbus@f0010100 { + compatible = "fsl,mpc8272-localbus", + "fsl,pq2-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <f0010100 40>; + + ranges = <0 0 fe000000 02000000 + 1 0 f4500000 00008000 + 3 0 f8200000 00008000>; + + flash@0,0 { + compatible = "jedec-flash"; + reg = <0 0 2000000>; + bank-width = <4>; + device-width = <1>; + }; + + board-control@1,0 { + reg = <1 0 20>; + compatible = "fsl,mpc8272ads-bcsr"; + }; + + PCI_PIC: interrupt-controller@3,0 { + compatible = "fsl,mpc8272ads-pci-pic", + "fsl,pq2ads-pci-pic"; + #interrupt-cells = <1>; + interrupt-controller; + reg = <3 0 8>; + interrupt-parent = <&PIC>; + interrupts = <14 8>; + }; + }; + + + pci@f0010800 { + device_type = "pci"; + reg = <f0010800 10c f00101ac 8 f00101c4 8>; + compatible = "fsl,mpc8272-pci", "fsl,pq2-pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + clock-frequency = <d#66666666>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x16 */ + b000 0 0 1 &PCI_PIC 0 + b000 0 0 2 &PCI_PIC 1 + b000 0 0 3 &PCI_PIC 2 + b000 0 0 4 &PCI_PIC 3 + + /* IDSEL 0x17 */ + b800 0 0 1 &PCI_PIC 4 + b800 0 0 2 &PCI_PIC 5 + b800 0 0 3 &PCI_PIC 6 + b800 0 0 4 &PCI_PIC 7 + + /* IDSEL 0x18 */ + c000 0 0 1 &PCI_PIC 8 + c000 0 0 2 &PCI_PIC 9 + c000 0 0 3 &PCI_PIC a + c000 0 0 4 &PCI_PIC b>; + + interrupt-parent = <&PIC>; + interrupts = <12 8>; + ranges = <42000000 0 80000000 80000000 0 20000000 + 02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 f6000000 0 02000000>; + }; + + soc@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8272", "fsl,pq2-soc"; + ranges = <00000000 f0000000 00053000>; + + // Temporary -- will go away once kernel uses ranges for get_immrbase(). + reg = <f0000000 00053000>; + + cpm@119c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8272-cpm", "fsl,cpm2"; + reg = <119c0 30>; + ranges; + + muram@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 2000 9800 800>; + }; + }; + + brg@119f0 { + compatible = "fsl,mpc8272-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <119f0 10 115f0 10>; + }; + + serial@11a00 { + device_type = "serial"; + compatible = "fsl,mpc8272-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <11a00 20 8000 100>; + interrupts = <28 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <00800000>; + }; + + serial@11a60 { + device_type = "serial"; + compatible = "fsl,mpc8272-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <11a60 20 8300 100>; + interrupts = <2b 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <4>; + fsl,cpm-command = <0ce00000>; + }; + + mdio@10d40 { + device_type = "mdio"; + compatible = "fsl,mpc8272ads-mdio-bitbang", + "fsl,mpc8272-mdio-bitbang", + "fsl,cpm2-mdio-bitbang"; + reg = <10d40 14>; + #address-cells = <1>; + #size-cells = <0>; + fsl,mdio-pin = <12>; + fsl,mdc-pin = <13>; + + PHY0: ethernet-phy@0 { + interrupt-parent = <&PIC>; + interrupts = <17 8>; + reg = <0>; + device_type = "ethernet-phy"; + }; + + PHY1: ethernet-phy@1 { + interrupt-parent = <&PIC>; + interrupts = <17 8>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@11300 { + device_type = "network"; + compatible = "fsl,mpc8272-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <11300 20 8400 100 11390 1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <20 8>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; + fsl,cpm-command = <12000300>; + }; + + ethernet@11320 { + device_type = "network"; + compatible = "fsl,mpc8272-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <11320 20 8500 100 113b0 1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <21 8>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; + fsl,cpm-command = <16200300>; + }; + }; + + PIC: interrupt-controller@10c00 { + #interrupt-cells = <2>; + interrupt-controller; + reg = <10c00 80>; + compatible = "fsl,mpc8272-pic", "fsl,cpm2-pic"; + }; /* May need to remove if on a part without crypto engine */ - crypto@30000 { - device_type = "crypto"; - model = "SEC2"; - compatible = "talitos"; - reg = <30000 10000>; - interrupts = <b 2>; - interrupt-parent = <&Cpm_pic>; - num-channels = <4>; - channel-fifo-len = <18>; - exec-units-mask = <0000007e>; + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "fsl,mpc8272-talitos-sec2", + "fsl,talitos-sec2", + "fsl,talitos", + "talitos"; + reg = <30000 10000>; + interrupts = <b 8>; + interrupt-parent = <&PIC>; + num-channels = <4>; + channel-fifo-len = <18>; + exec-units-mask = <0000007e>; /* desc mask is for rev1.x, we need runtime fixup for >=2.x */ - descriptor-types-mask = <01010ebf>; - }; + descriptor-types-mask = <01010ebf>; + }; + }; - }; + chosen { + linux,stdout-path = "/soc/cpm/serial@11a00"; + }; }; diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index c5adbe4..9e7eba9 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -29,7 +29,6 @@ timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader - 32-bit; }; }; @@ -41,7 +40,6 @@ soc8313@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 e0000000 00100000>; reg = <e0000000 00000200>; @@ -73,11 +71,11 @@ spi@7000 { device_type = "spi"; - compatible = "mpc83xx_spi"; + compatible = "fsl_spi"; reg = <7000 1000>; interrupts = <10 8>; interrupt-parent = < &ipic >; - mode = <0>; + mode = "cpu"; }; /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ @@ -152,36 +150,6 @@ interrupt-parent = < &ipic >; }; - pci@8500 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x0E -mini PCI */ - 7000 0 0 1 &ipic 12 8 - 7000 0 0 2 &ipic 12 8 - 7000 0 0 3 &ipic 12 8 - 7000 0 0 4 &ipic 12 8 - - /* IDSEL 0x0F - PCI slot */ - 7800 0 0 1 &ipic 11 8 - 7800 0 0 2 &ipic 12 8 - 7800 0 0 3 &ipic 11 8 - 7800 0 0 4 &ipic 12 8>; - interrupt-parent = < &ipic >; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <02000000 0 90000000 90000000 0 10000000 - 42000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8500 100>; - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; - crypto@30000 { device_type = "crypto"; model = "SEC2"; @@ -207,8 +175,37 @@ #address-cells = <0>; #interrupt-cells = <2>; reg = <700 100>; - built-in; device_type = "ipic"; }; }; + + pci@e0008500 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x0E -mini PCI */ + 7000 0 0 1 &ipic 12 8 + 7000 0 0 2 &ipic 12 8 + 7000 0 0 3 &ipic 12 8 + 7000 0 0 4 &ipic 12 8 + + /* IDSEL 0x0F - PCI slot */ + 7800 0 0 1 &ipic 11 8 + 7800 0 0 2 &ipic 12 8 + 7800 0 0 3 &ipic 11 8 + 7800 0 0 4 &ipic 12 8>; + interrupt-parent = < &ipic >; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 90000000 90000000 0 10000000 + 42000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008500 100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; }; diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index f158ed7..fcd333c 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -29,7 +29,6 @@ timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; - 32-bit; }; }; @@ -46,7 +45,6 @@ soc8323@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 e0000000 00100000>; reg = <e0000000 00000200>; @@ -99,71 +97,11 @@ descriptor-types-mask = <0122003f>; }; - pci@8500 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - /* IDSEL 0x11 AD17 */ - 8800 0 0 1 &ipic 14 8 - 8800 0 0 2 &ipic 15 8 - 8800 0 0 3 &ipic 16 8 - 8800 0 0 4 &ipic 17 8 - - /* IDSEL 0x12 AD18 */ - 9000 0 0 1 &ipic 16 8 - 9000 0 0 2 &ipic 17 8 - 9000 0 0 3 &ipic 14 8 - 9000 0 0 4 &ipic 15 8 - - /* IDSEL 0x13 AD19 */ - 9800 0 0 1 &ipic 17 8 - 9800 0 0 2 &ipic 14 8 - 9800 0 0 3 &ipic 15 8 - 9800 0 0 4 &ipic 16 8 - - /* IDSEL 0x15 AD21*/ - a800 0 0 1 &ipic 14 8 - a800 0 0 2 &ipic 15 8 - a800 0 0 3 &ipic 16 8 - a800 0 0 4 &ipic 17 8 - - /* IDSEL 0x16 AD22*/ - b000 0 0 1 &ipic 17 8 - b000 0 0 2 &ipic 14 8 - b000 0 0 3 &ipic 15 8 - b000 0 0 4 &ipic 16 8 - - /* IDSEL 0x17 AD23*/ - b800 0 0 1 &ipic 16 8 - b800 0 0 2 &ipic 17 8 - b800 0 0 3 &ipic 14 8 - b800 0 0 4 &ipic 15 8 - - /* IDSEL 0x18 AD24*/ - c000 0 0 1 &ipic 15 8 - c000 0 0 2 &ipic 16 8 - c000 0 0 3 &ipic 17 8 - c000 0 0 4 &ipic 14 8>; - interrupt-parent = < &ipic >; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <02000000 0 90000000 90000000 0 10000000 - 42000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 d0000000 0 00100000>; - clock-frequency = <0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8500 100>; - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; - ipic: pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; reg = <700 100>; - built-in; device_type = "ipic"; }; @@ -333,10 +271,68 @@ #address-cells = <0>; #interrupt-cells = <1>; reg = <80 80>; - built-in; big-endian; interrupts = <20 8 21 8>; //high:32 low:33 interrupt-parent = < &ipic >; }; }; + + pci@e0008500 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x11 AD17 */ + 8800 0 0 1 &ipic 14 8 + 8800 0 0 2 &ipic 15 8 + 8800 0 0 3 &ipic 16 8 + 8800 0 0 4 &ipic 17 8 + + /* IDSEL 0x12 AD18 */ + 9000 0 0 1 &ipic 16 8 + 9000 0 0 2 &ipic 17 8 + 9000 0 0 3 &ipic 14 8 + 9000 0 0 4 &ipic 15 8 + + /* IDSEL 0x13 AD19 */ + 9800 0 0 1 &ipic 17 8 + 9800 0 0 2 &ipic 14 8 + 9800 0 0 3 &ipic 15 8 + 9800 0 0 4 &ipic 16 8 + + /* IDSEL 0x15 AD21*/ + a800 0 0 1 &ipic 14 8 + a800 0 0 2 &ipic 15 8 + a800 0 0 3 &ipic 16 8 + a800 0 0 4 &ipic 17 8 + + /* IDSEL 0x16 AD22*/ + b000 0 0 1 &ipic 17 8 + b000 0 0 2 &ipic 14 8 + b000 0 0 3 &ipic 15 8 + b000 0 0 4 &ipic 16 8 + + /* IDSEL 0x17 AD23*/ + b800 0 0 1 &ipic 16 8 + b800 0 0 2 &ipic 17 8 + b800 0 0 3 &ipic 14 8 + b800 0 0 4 &ipic 15 8 + + /* IDSEL 0x18 AD24*/ + c000 0 0 1 &ipic 15 8 + c000 0 0 2 &ipic 16 8 + c000 0 0 3 &ipic 17 8 + c000 0 0 4 &ipic 14 8>; + interrupt-parent = < &ipic >; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 90000000 90000000 0 10000000 + 42000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 d0000000 0 00100000>; + clock-frequency = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008500 100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; }; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index 7c4beff..388c8a7 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -29,7 +29,6 @@ timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; - 32-bit; }; }; @@ -41,7 +40,6 @@ soc8323@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 e0000000 00100000>; reg = <e0000000 00000200>; @@ -94,45 +92,11 @@ descriptor-types-mask = <0122003f>; }; - pci@8500 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - /* IDSEL 0x10 AD16 (USB) */ - 8000 0 0 1 &pic 11 8 - - /* IDSEL 0x11 AD17 (Mini1)*/ - 8800 0 0 1 &pic 12 8 - 8800 0 0 2 &pic 13 8 - 8800 0 0 3 &pic 14 8 - 8800 0 0 4 &pic 30 8 - - /* IDSEL 0x12 AD18 (PCI/Mini2) */ - 9000 0 0 1 &pic 13 8 - 9000 0 0 2 &pic 14 8 - 9000 0 0 3 &pic 30 8 - 9000 0 0 4 &pic 11 8>; - - interrupt-parent = <&pic>; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <42000000 0 80000000 80000000 0 10000000 - 02000000 0 90000000 90000000 0 10000000 - 01000000 0 d0000000 d0000000 0 04000000>; - clock-frequency = <0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8500 100>; - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; - pic:pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; reg = <700 100>; - built-in; device_type = "ipic"; }; @@ -211,7 +175,7 @@ reg = <4c0 40>; interrupts = <2>; interrupt-parent = <&qeic>; - mode = "cpu"; + mode = "cpu-qe"; }; spi@500 { @@ -292,10 +256,42 @@ #address-cells = <0>; #interrupt-cells = <1>; reg = <80 80>; - built-in; big-endian; interrupts = <20 8 21 8>; //high:32 low:33 interrupt-parent = <&pic>; }; }; + + pci@e0008500 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x10 AD16 (USB) */ + 8000 0 0 1 &pic 11 8 + + /* IDSEL 0x11 AD17 (Mini1)*/ + 8800 0 0 1 &pic 12 8 + 8800 0 0 2 &pic 13 8 + 8800 0 0 3 &pic 14 8 + 8800 0 0 4 &pic 30 8 + + /* IDSEL 0x12 AD18 (PCI/Mini2) */ + 9000 0 0 1 &pic 13 8 + 9000 0 0 2 &pic 14 8 + 9000 0 0 3 &pic 30 8 + 9000 0 0 4 &pic 11 8>; + + interrupt-parent = <&pic>; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <42000000 0 80000000 80000000 0 10000000 + 02000000 0 90000000 90000000 0 10000000 + 01000000 0 d0000000 d0000000 0 04000000>; + clock-frequency = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008500 100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; }; diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 44c065a..5072f6d 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -28,7 +28,6 @@ timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader - 32-bit; }; }; @@ -40,7 +39,6 @@ soc8349@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 e0000000 00100000>; reg = <e0000000 00000200>; @@ -72,11 +70,11 @@ spi@7000 { device_type = "spi"; - compatible = "mpc83xx_spi"; + compatible = "fsl_spi"; reg = <7000 1000>; interrupts = <10 8>; interrupt-parent = < &ipic >; - mode = <0>; + mode = "cpu"; }; usb@22000 { @@ -142,6 +140,7 @@ interrupts = <20 8 21 8 22 8>; interrupt-parent = < &ipic >; phy-handle = < &phy1c >; + linux,network-index = <0>; }; ethernet@25000 { @@ -161,6 +160,7 @@ interrupts = <23 8 24 8 25 8>; interrupt-parent = < &ipic >; phy-handle = < &phy1f >; + linux,network-index = <1>; }; serial@4500 { @@ -181,52 +181,6 @@ interrupt-parent = < &ipic >; }; - pci@8500 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - /* IDSEL 0x10 - SATA */ - 8000 0 0 1 &ipic 16 8 /* SATA_INTA */ - >; - interrupt-parent = < &ipic >; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <42000000 0 80000000 80000000 0 10000000 - 02000000 0 90000000 90000000 0 10000000 - 01000000 0 00000000 e2000000 0 01000000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8500 100>; - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; - - pci@8600 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0E - MiniPCI Slot */ - 7000 0 0 1 &ipic 15 8 /* PCI_INTA */ - - /* IDSEL 0x0F - PCI Slot */ - 7800 0 0 1 &ipic 14 8 /* PCI_INTA */ - 7800 0 0 2 &ipic 15 8 /* PCI_INTB */ - >; - interrupt-parent = < &ipic >; - interrupts = <43 8>; - bus-range = <1 1>; - ranges = <42000000 0 a0000000 a0000000 0 10000000 - 02000000 0 b0000000 b0000000 0 10000000 - 01000000 0 00000000 e3000000 0 01000000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8600 100>; - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; - crypto@30000 { device_type = "crypto"; model = "SEC2"; @@ -245,8 +199,56 @@ #address-cells = <0>; #interrupt-cells = <2>; reg = <700 100>; - built-in; device_type = "ipic"; }; }; + + pci@e0008500 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x10 - SATA */ + 8000 0 0 1 &ipic 16 8 /* SATA_INTA */ + >; + interrupt-parent = < &ipic >; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <42000000 0 80000000 80000000 0 10000000 + 02000000 0 90000000 90000000 0 10000000 + 01000000 0 00000000 e2000000 0 01000000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008500 100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + pci@e0008600 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0E - MiniPCI Slot */ + 7000 0 0 1 &ipic 15 8 /* PCI_INTA */ + + /* IDSEL 0x0F - PCI Slot */ + 7800 0 0 1 &ipic 14 8 /* PCI_INTA */ + 7800 0 0 2 &ipic 15 8 /* PCI_INTB */ + >; + interrupt-parent = < &ipic >; + interrupts = <43 8>; + bus-range = <0 0>; + ranges = <42000000 0 a0000000 a0000000 0 10000000 + 02000000 0 b0000000 b0000000 0 10000000 + 01000000 0 00000000 e3000000 0 01000000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008600 100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + + }; diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts index 0b83871..074f7a2 100644 --- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -28,7 +28,6 @@ timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader - 32-bit; }; }; @@ -40,7 +39,6 @@ soc8349@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 e0000000 00100000>; reg = <e0000000 00000200>; @@ -72,11 +70,11 @@ spi@7000 { device_type = "spi"; - compatible = "mpc83xx_spi"; + compatible = "fsl_spi"; reg = <7000 1000>; interrupts = <10 8>; interrupt-parent = < &ipic >; - mode = <0>; + mode = "cpu"; }; usb@23000 { @@ -116,6 +114,7 @@ interrupts = <20 8 21 8 22 8>; interrupt-parent = < &ipic >; phy-handle = < &phy1c >; + linux,network-index = <0>; }; serial@4500 { @@ -136,28 +135,6 @@ interrupt-parent = < &ipic >; }; - pci@8600 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0F - PCI Slot */ - 7800 0 0 1 &ipic 14 8 /* PCI_INTA */ - 7800 0 0 2 &ipic 15 8 /* PCI_INTB */ - >; - interrupt-parent = < &ipic >; - interrupts = <43 8>; - bus-range = <1 1>; - ranges = <42000000 0 a0000000 a0000000 0 10000000 - 02000000 0 b0000000 b0000000 0 10000000 - 01000000 0 00000000 e3000000 0 01000000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8600 100>; - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; - crypto@30000 { device_type = "crypto"; model = "SEC2"; @@ -176,8 +153,29 @@ #address-cells = <0>; #interrupt-cells = <2>; reg = <700 100>; - built-in; device_type = "ipic"; }; }; + + pci@e0008600 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0F - PCI Slot */ + 7800 0 0 1 &ipic 14 8 /* PCI_INTA */ + 7800 0 0 2 &ipic 15 8 /* PCI_INTB */ + >; + interrupt-parent = < &ipic >; + interrupts = <43 8>; + bus-range = <1 1>; + ranges = <42000000 0 a0000000 a0000000 0 10000000 + 02000000 0 b0000000 b0000000 0 10000000 + 01000000 0 00000000 e3000000 0 01000000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008600 100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; }; diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index 4810997..e5a84ef 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -29,7 +29,6 @@ timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader - 32-bit; }; }; @@ -46,7 +45,6 @@ soc8349@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 e0000000 00100000>; reg = <e0000000 00000200>; @@ -78,11 +76,11 @@ spi@7000 { device_type = "spi"; - compatible = "mpc83xx_spi"; + compatible = "fsl_spi"; reg = <7000 1000>; interrupts = <10 8>; interrupt-parent = < &ipic >; - mode = <0>; + mode = "cpu"; }; /* phy type (ULPI or SERIAL) are only types supportted for MPH */ @@ -146,6 +144,7 @@ interrupts = <20 8 21 8 22 8>; interrupt-parent = < &ipic >; phy-handle = < &phy0 >; + linux,network-index = <0>; }; ethernet@25000 { @@ -165,6 +164,7 @@ interrupts = <23 8 24 8 25 8>; interrupt-parent = < &ipic >; phy-handle = < &phy1 >; + linux,network-index = <1>; }; serial@4500 { @@ -185,126 +185,6 @@ interrupt-parent = < &ipic >; }; - pci@8500 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x11 */ - 8800 0 0 1 &ipic 14 8 - 8800 0 0 2 &ipic 15 8 - 8800 0 0 3 &ipic 16 8 - 8800 0 0 4 &ipic 17 8 - - /* IDSEL 0x12 */ - 9000 0 0 1 &ipic 16 8 - 9000 0 0 2 &ipic 17 8 - 9000 0 0 3 &ipic 14 8 - 9000 0 0 4 &ipic 15 8 - - /* IDSEL 0x13 */ - 9800 0 0 1 &ipic 17 8 - 9800 0 0 2 &ipic 14 8 - 9800 0 0 3 &ipic 15 8 - 9800 0 0 4 &ipic 16 8 - - /* IDSEL 0x15 */ - a800 0 0 1 &ipic 14 8 - a800 0 0 2 &ipic 15 8 - a800 0 0 3 &ipic 16 8 - a800 0 0 4 &ipic 17 8 - - /* IDSEL 0x16 */ - b000 0 0 1 &ipic 17 8 - b000 0 0 2 &ipic 14 8 - b000 0 0 3 &ipic 15 8 - b000 0 0 4 &ipic 16 8 - - /* IDSEL 0x17 */ - b800 0 0 1 &ipic 16 8 - b800 0 0 2 &ipic 17 8 - b800 0 0 3 &ipic 14 8 - b800 0 0 4 &ipic 15 8 - - /* IDSEL 0x18 */ - c000 0 0 1 &ipic 15 8 - c000 0 0 2 &ipic 16 8 - c000 0 0 3 &ipic 17 8 - c000 0 0 4 &ipic 14 8>; - interrupt-parent = < &ipic >; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <02000000 0 90000000 90000000 0 10000000 - 42000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8500 100>; - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; - - pci@8600 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x11 */ - 8800 0 0 1 &ipic 14 8 - 8800 0 0 2 &ipic 15 8 - 8800 0 0 3 &ipic 16 8 - 8800 0 0 4 &ipic 17 8 - - /* IDSEL 0x12 */ - 9000 0 0 1 &ipic 16 8 - 9000 0 0 2 &ipic 17 8 - 9000 0 0 3 &ipic 14 8 - 9000 0 0 4 &ipic 15 8 - - /* IDSEL 0x13 */ - 9800 0 0 1 &ipic 17 8 - 9800 0 0 2 &ipic 14 8 - 9800 0 0 3 &ipic 15 8 - 9800 0 0 4 &ipic 16 8 - - /* IDSEL 0x15 */ - a800 0 0 1 &ipic 14 8 - a800 0 0 2 &ipic 15 8 - a800 0 0 3 &ipic 16 8 - a800 0 0 4 &ipic 17 8 - - /* IDSEL 0x16 */ - b000 0 0 1 &ipic 17 8 - b000 0 0 2 &ipic 14 8 - b000 0 0 3 &ipic 15 8 - b000 0 0 4 &ipic 16 8 - - /* IDSEL 0x17 */ - b800 0 0 1 &ipic 16 8 - b800 0 0 2 &ipic 17 8 - b800 0 0 3 &ipic 14 8 - b800 0 0 4 &ipic 15 8 - - /* IDSEL 0x18 */ - c000 0 0 1 &ipic 15 8 - c000 0 0 2 &ipic 16 8 - c000 0 0 3 &ipic 17 8 - c000 0 0 4 &ipic 14 8>; - interrupt-parent = < &ipic >; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <02000000 0 b0000000 b0000000 0 10000000 - 42000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 e2100000 0 00100000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8600 100>; - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; - /* May need to remove if on a part without crypto engine */ crypto@30000 { device_type = "crypto"; @@ -332,8 +212,127 @@ #address-cells = <0>; #interrupt-cells = <2>; reg = <700 100>; - built-in; device_type = "ipic"; }; }; + + pci@e0008500 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x11 */ + 8800 0 0 1 &ipic 14 8 + 8800 0 0 2 &ipic 15 8 + 8800 0 0 3 &ipic 16 8 + 8800 0 0 4 &ipic 17 8 + + /* IDSEL 0x12 */ + 9000 0 0 1 &ipic 16 8 + 9000 0 0 2 &ipic 17 8 + 9000 0 0 3 &ipic 14 8 + 9000 0 0 4 &ipic 15 8 + + /* IDSEL 0x13 */ + 9800 0 0 1 &ipic 17 8 + 9800 0 0 2 &ipic 14 8 + 9800 0 0 3 &ipic 15 8 + 9800 0 0 4 &ipic 16 8 + + /* IDSEL 0x15 */ + a800 0 0 1 &ipic 14 8 + a800 0 0 2 &ipic 15 8 + a800 0 0 3 &ipic 16 8 + a800 0 0 4 &ipic 17 8 + + /* IDSEL 0x16 */ + b000 0 0 1 &ipic 17 8 + b000 0 0 2 &ipic 14 8 + b000 0 0 3 &ipic 15 8 + b000 0 0 4 &ipic 16 8 + + /* IDSEL 0x17 */ + b800 0 0 1 &ipic 16 8 + b800 0 0 2 &ipic 17 8 + b800 0 0 3 &ipic 14 8 + b800 0 0 4 &ipic 15 8 + + /* IDSEL 0x18 */ + c000 0 0 1 &ipic 15 8 + c000 0 0 2 &ipic 16 8 + c000 0 0 3 &ipic 17 8 + c000 0 0 4 &ipic 14 8>; + interrupt-parent = < &ipic >; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 90000000 90000000 0 10000000 + 42000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008500 100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + pci@e0008600 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x11 */ + 8800 0 0 1 &ipic 14 8 + 8800 0 0 2 &ipic 15 8 + 8800 0 0 3 &ipic 16 8 + 8800 0 0 4 &ipic 17 8 + + /* IDSEL 0x12 */ + 9000 0 0 1 &ipic 16 8 + 9000 0 0 2 &ipic 17 8 + 9000 0 0 3 &ipic 14 8 + 9000 0 0 4 &ipic 15 8 + + /* IDSEL 0x13 */ + 9800 0 0 1 &ipic 17 8 + 9800 0 0 2 &ipic 14 8 + 9800 0 0 3 &ipic 15 8 + 9800 0 0 4 &ipic 16 8 + + /* IDSEL 0x15 */ + a800 0 0 1 &ipic 14 8 + a800 0 0 2 &ipic 15 8 + a800 0 0 3 &ipic 16 8 + a800 0 0 4 &ipic 17 8 + + /* IDSEL 0x16 */ + b000 0 0 1 &ipic 17 8 + b000 0 0 2 &ipic 14 8 + b000 0 0 3 &ipic 15 8 + b000 0 0 4 &ipic 16 8 + + /* IDSEL 0x17 */ + b800 0 0 1 &ipic 16 8 + b800 0 0 2 &ipic 17 8 + b800 0 0 3 &ipic 14 8 + b800 0 0 4 &ipic 15 8 + + /* IDSEL 0x18 */ + c000 0 0 1 &ipic 15 8 + c000 0 0 2 &ipic 16 8 + c000 0 0 3 &ipic 17 8 + c000 0 0 4 &ipic 14 8>; + interrupt-parent = < &ipic >; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 b0000000 b0000000 0 10000000 + 42000000 0 a0000000 a0000000 0 10000000 + 01000000 0 00000000 e2100000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008600 100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; }; diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index e3f7c12..fbd1573 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -34,7 +34,6 @@ timebase-frequency = <3EF1480>; bus-frequency = <FBC5200>; clock-frequency = <1F78A400>; - 32-bit; }; }; @@ -51,7 +50,6 @@ soc8360@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 e0000000 00100000>; reg = <e0000000 00000200>; @@ -113,72 +111,11 @@ descriptor-types-mask = <01010ebf>; }; - pci@8500 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x11 AD17 */ - 8800 0 0 1 &ipic 14 8 - 8800 0 0 2 &ipic 15 8 - 8800 0 0 3 &ipic 16 8 - 8800 0 0 4 &ipic 17 8 - - /* IDSEL 0x12 AD18 */ - 9000 0 0 1 &ipic 16 8 - 9000 0 0 2 &ipic 17 8 - 9000 0 0 3 &ipic 14 8 - 9000 0 0 4 &ipic 15 8 - - /* IDSEL 0x13 AD19 */ - 9800 0 0 1 &ipic 17 8 - 9800 0 0 2 &ipic 14 8 - 9800 0 0 3 &ipic 15 8 - 9800 0 0 4 &ipic 16 8 - - /* IDSEL 0x15 AD21*/ - a800 0 0 1 &ipic 14 8 - a800 0 0 2 &ipic 15 8 - a800 0 0 3 &ipic 16 8 - a800 0 0 4 &ipic 17 8 - - /* IDSEL 0x16 AD22*/ - b000 0 0 1 &ipic 17 8 - b000 0 0 2 &ipic 14 8 - b000 0 0 3 &ipic 15 8 - b000 0 0 4 &ipic 16 8 - - /* IDSEL 0x17 AD23*/ - b800 0 0 1 &ipic 16 8 - b800 0 0 2 &ipic 17 8 - b800 0 0 3 &ipic 14 8 - b800 0 0 4 &ipic 15 8 - - /* IDSEL 0x18 AD24*/ - c000 0 0 1 &ipic 15 8 - c000 0 0 2 &ipic 16 8 - c000 0 0 3 &ipic 17 8 - c000 0 0 4 &ipic 14 8>; - interrupt-parent = < &ipic >; - interrupts = <42 8>; - bus-range = <0 0>; - ranges = <02000000 0 a0000000 a0000000 0 10000000 - 42000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8500 100>; - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; - ipic: pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; reg = <700 100>; - built-in; device_type = "ipic"; }; @@ -364,11 +301,69 @@ #address-cells = <0>; #interrupt-cells = <1>; reg = <80 80>; - built-in; big-endian; interrupts = <20 8 21 8>; //high:32 low:33 interrupt-parent = < &ipic >; }; + }; + pci@e0008500 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x11 AD17 */ + 8800 0 0 1 &ipic 14 8 + 8800 0 0 2 &ipic 15 8 + 8800 0 0 3 &ipic 16 8 + 8800 0 0 4 &ipic 17 8 + + /* IDSEL 0x12 AD18 */ + 9000 0 0 1 &ipic 16 8 + 9000 0 0 2 &ipic 17 8 + 9000 0 0 3 &ipic 14 8 + 9000 0 0 4 &ipic 15 8 + + /* IDSEL 0x13 AD19 */ + 9800 0 0 1 &ipic 17 8 + 9800 0 0 2 &ipic 14 8 + 9800 0 0 3 &ipic 15 8 + 9800 0 0 4 &ipic 16 8 + + /* IDSEL 0x15 AD21*/ + a800 0 0 1 &ipic 14 8 + a800 0 0 2 &ipic 15 8 + a800 0 0 3 &ipic 16 8 + a800 0 0 4 &ipic 17 8 + + /* IDSEL 0x16 AD22*/ + b000 0 0 1 &ipic 17 8 + b000 0 0 2 &ipic 14 8 + b000 0 0 3 &ipic 15 8 + b000 0 0 4 &ipic 16 8 + + /* IDSEL 0x17 AD23*/ + b800 0 0 1 &ipic 16 8 + b800 0 0 2 &ipic 17 8 + b800 0 0 3 &ipic 14 8 + b800 0 0 4 &ipic 15 8 + + /* IDSEL 0x18 AD24*/ + c000 0 0 1 &ipic 15 8 + c000 0 0 2 &ipic 16 8 + c000 0 0 3 &ipic 17 8 + c000 0 0 4 &ipic 14 8>; + interrupt-parent = < &ipic >; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 10000000 + 42000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008500 100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; }; }; diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index fc8dff9..6442a71 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -30,7 +30,6 @@ timebase-frequency = <0>; // 33 MHz, from uboot bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot - 32-bit; }; }; @@ -42,7 +41,6 @@ soc8540@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 e0000000 00100000>; reg = <e0000000 00100000>; // CCSRBAR 1M @@ -173,105 +171,104 @@ interrupts = <2a 2>; interrupt-parent = <&mpic>; }; - pci@8000 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; - /* IDSEL 0x02 */ - 1000 0 0 1 &mpic 1 1 - 1000 0 0 2 &mpic 2 1 - 1000 0 0 3 &mpic 3 1 - 1000 0 0 4 &mpic 4 1 + pci@e0008000 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < - /* IDSEL 0x03 */ - 1800 0 0 1 &mpic 4 1 - 1800 0 0 2 &mpic 1 1 - 1800 0 0 3 &mpic 2 1 - 1800 0 0 4 &mpic 3 1 + /* IDSEL 0x02 */ + 1000 0 0 1 &mpic 1 1 + 1000 0 0 2 &mpic 2 1 + 1000 0 0 3 &mpic 3 1 + 1000 0 0 4 &mpic 4 1 - /* IDSEL 0x04 */ - 2000 0 0 1 &mpic 3 1 - 2000 0 0 2 &mpic 4 1 - 2000 0 0 3 &mpic 1 1 - 2000 0 0 4 &mpic 2 1 + /* IDSEL 0x03 */ + 1800 0 0 1 &mpic 4 1 + 1800 0 0 2 &mpic 1 1 + 1800 0 0 3 &mpic 2 1 + 1800 0 0 4 &mpic 3 1 - /* IDSEL 0x05 */ - 2800 0 0 1 &mpic 2 1 - 2800 0 0 2 &mpic 3 1 - 2800 0 0 3 &mpic 4 1 - 2800 0 0 4 &mpic 1 1 + /* IDSEL 0x04 */ + 2000 0 0 1 &mpic 3 1 + 2000 0 0 2 &mpic 4 1 + 2000 0 0 3 &mpic 1 1 + 2000 0 0 4 &mpic 2 1 - /* IDSEL 0x0c */ - 6000 0 0 1 &mpic 1 1 - 6000 0 0 2 &mpic 2 1 - 6000 0 0 3 &mpic 3 1 - 6000 0 0 4 &mpic 4 1 + /* IDSEL 0x05 */ + 2800 0 0 1 &mpic 2 1 + 2800 0 0 2 &mpic 3 1 + 2800 0 0 3 &mpic 4 1 + 2800 0 0 4 &mpic 1 1 - /* IDSEL 0x0d */ - 6800 0 0 1 &mpic 4 1 - 6800 0 0 2 &mpic 1 1 - 6800 0 0 3 &mpic 2 1 - 6800 0 0 4 &mpic 3 1 + /* IDSEL 0x0c */ + 6000 0 0 1 &mpic 1 1 + 6000 0 0 2 &mpic 2 1 + 6000 0 0 3 &mpic 3 1 + 6000 0 0 4 &mpic 4 1 - /* IDSEL 0x0e */ - 7000 0 0 1 &mpic 3 1 - 7000 0 0 2 &mpic 4 1 - 7000 0 0 3 &mpic 1 1 - 7000 0 0 4 &mpic 2 1 + /* IDSEL 0x0d */ + 6800 0 0 1 &mpic 4 1 + 6800 0 0 2 &mpic 1 1 + 6800 0 0 3 &mpic 2 1 + 6800 0 0 4 &mpic 3 1 - /* IDSEL 0x0f */ - 7800 0 0 1 &mpic 2 1 - 7800 0 0 2 &mpic 3 1 - 7800 0 0 3 &mpic 4 1 - 7800 0 0 4 &mpic 1 1 + /* IDSEL 0x0e */ + 7000 0 0 1 &mpic 3 1 + 7000 0 0 2 &mpic 4 1 + 7000 0 0 3 &mpic 1 1 + 7000 0 0 4 &mpic 2 1 - /* IDSEL 0x12 */ - 9000 0 0 1 &mpic 1 1 - 9000 0 0 2 &mpic 2 1 - 9000 0 0 3 &mpic 3 1 - 9000 0 0 4 &mpic 4 1 + /* IDSEL 0x0f */ + 7800 0 0 1 &mpic 2 1 + 7800 0 0 2 &mpic 3 1 + 7800 0 0 3 &mpic 4 1 + 7800 0 0 4 &mpic 1 1 - /* IDSEL 0x13 */ - 9800 0 0 1 &mpic 4 1 - 9800 0 0 2 &mpic 1 1 - 9800 0 0 3 &mpic 2 1 - 9800 0 0 4 &mpic 3 1 + /* IDSEL 0x12 */ + 9000 0 0 1 &mpic 1 1 + 9000 0 0 2 &mpic 2 1 + 9000 0 0 3 &mpic 3 1 + 9000 0 0 4 &mpic 4 1 - /* IDSEL 0x14 */ - a000 0 0 1 &mpic 3 1 - a000 0 0 2 &mpic 4 1 - a000 0 0 3 &mpic 1 1 - a000 0 0 4 &mpic 2 1 + /* IDSEL 0x13 */ + 9800 0 0 1 &mpic 4 1 + 9800 0 0 2 &mpic 1 1 + 9800 0 0 3 &mpic 2 1 + 9800 0 0 4 &mpic 3 1 - /* IDSEL 0x15 */ - a800 0 0 1 &mpic 2 1 - a800 0 0 2 &mpic 3 1 - a800 0 0 3 &mpic 4 1 - a800 0 0 4 &mpic 1 1>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8000 1000>; - compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; - device_type = "pci"; - }; + /* IDSEL 0x14 */ + a000 0 0 1 &mpic 3 1 + a000 0 0 2 &mpic 4 1 + a000 0 0 3 &mpic 1 1 + a000 0 0 4 &mpic 2 1 - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <40000 40000>; - built-in; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - big-endian; - }; + /* IDSEL 0x15 */ + a800 0 0 1 &mpic 2 1 + a800 0 0 2 &mpic 3 1 + a800 0 0 3 &mpic 4 1 + a800 0 0 4 &mpic 1 1>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008000 1000>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; }; }; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index fb0b647..f3f4d79 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -30,7 +30,6 @@ timebase-frequency = <0>; // 33 MHz, from uboot bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot - 32-bit; }; }; @@ -42,10 +41,9 @@ soc8541@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 e0000000 00100000>; - reg = <e0000000 00100000>; // CCSRBAR 1M + reg = <e0000000 00001000>; // CCSRBAR 1M bus-frequency = <0>; memory-controller@2000 { @@ -137,113 +135,145 @@ interrupt-parent = <&mpic>; }; - pci1: pci@8000 { - interrupt-map-mask = <1f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x10 */ - 08000 0 0 1 &mpic 0 1 - 08000 0 0 2 &mpic 1 1 - 08000 0 0 3 &mpic 2 1 - 08000 0 0 4 &mpic 3 1 - - /* IDSEL 0x11 */ - 08800 0 0 1 &mpic 0 1 - 08800 0 0 2 &mpic 1 1 - 08800 0 0 3 &mpic 2 1 - 08800 0 0 4 &mpic 3 1 - - /* IDSEL 0x12 (Slot 1) */ - 09000 0 0 1 &mpic 0 1 - 09000 0 0 2 &mpic 1 1 - 09000 0 0 3 &mpic 2 1 - 09000 0 0 4 &mpic 3 1 - - /* IDSEL 0x13 (Slot 2) */ - 09800 0 0 1 &mpic 1 1 - 09800 0 0 2 &mpic 2 1 - 09800 0 0 3 &mpic 3 1 - 09800 0 0 4 &mpic 0 1 - - /* IDSEL 0x14 (Slot 3) */ - 0a000 0 0 1 &mpic 2 1 - 0a000 0 0 2 &mpic 3 1 - 0a000 0 0 3 &mpic 0 1 - 0a000 0 0 4 &mpic 1 1 - - /* IDSEL 0x15 (Slot 4) */ - 0a800 0 0 1 &mpic 3 1 - 0a800 0 0 2 &mpic 0 1 - 0a800 0 0 3 &mpic 1 1 - 0a800 0 0 4 &mpic 2 1 - - /* Bus 1 (Tundra Bridge) */ - /* IDSEL 0x12 (ISA bridge) */ - 19000 0 0 1 &mpic 0 1 - 19000 0 0 2 &mpic 1 1 - 19000 0 0 3 &mpic 2 1 - 19000 0 0 4 &mpic 3 1>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8000 1000>; - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; - - i8259@19000 { - clock-frequency = <0>; + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8541-cpm", "fsl,cpm2"; + reg = <919c0 30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 80000 10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 2000 9000 1000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8541-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <919f0 10 915f0 10>; + }; + + cpmpic: pic@90c00 { interrupt-controller; - device_type = "interrupt-controller"; - reg = <19000 0 0 0 1>; #address-cells = <0>; #interrupt-cells = <2>; - built-in; - compatible = "chrp,iic"; - big-endian; - interrupts = <1>; - interrupt-parent = <&pci1>; + interrupts = <2e 2>; + interrupt-parent = <&mpic>; + reg = <90c00 80>; + compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic"; }; }; + }; - pci@9000 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < + pci1: pci@e0008000 { + interrupt-map-mask = <1f800 0 0 7>; + interrupt-map = < - /* IDSEL 0x15 */ - a800 0 0 1 &mpic b 1 - a800 0 0 2 &mpic b 1 - a800 0 0 3 &mpic b 1 - a800 0 0 4 &mpic b 1>; - interrupt-parent = <&mpic>; - interrupts = <19 2>; - bus-range = <0 0>; - ranges = <02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 e3000000 0 00100000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <9000 1000>; - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; - }; + /* IDSEL 0x10 */ + 08000 0 0 1 &mpic 0 1 + 08000 0 0 2 &mpic 1 1 + 08000 0 0 3 &mpic 2 1 + 08000 0 0 4 &mpic 3 1 - mpic: pic@40000 { - clock-frequency = <0>; + /* IDSEL 0x11 */ + 08800 0 0 1 &mpic 0 1 + 08800 0 0 2 &mpic 1 1 + 08800 0 0 3 &mpic 2 1 + 08800 0 0 4 &mpic 3 1 + + /* IDSEL 0x12 (Slot 1) */ + 09000 0 0 1 &mpic 0 1 + 09000 0 0 2 &mpic 1 1 + 09000 0 0 3 &mpic 2 1 + 09000 0 0 4 &mpic 3 1 + + /* IDSEL 0x13 (Slot 2) */ + 09800 0 0 1 &mpic 1 1 + 09800 0 0 2 &mpic 2 1 + 09800 0 0 3 &mpic 3 1 + 09800 0 0 4 &mpic 0 1 + + /* IDSEL 0x14 (Slot 3) */ + 0a000 0 0 1 &mpic 2 1 + 0a000 0 0 2 &mpic 3 1 + 0a000 0 0 3 &mpic 0 1 + 0a000 0 0 4 &mpic 1 1 + + /* IDSEL 0x15 (Slot 4) */ + 0a800 0 0 1 &mpic 3 1 + 0a800 0 0 2 &mpic 0 1 + 0a800 0 0 3 &mpic 1 1 + 0a800 0 0 4 &mpic 2 1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 19000 0 0 1 &mpic 0 1 + 19000 0 0 2 &mpic 1 1 + 19000 0 0 3 &mpic 2 1 + 19000 0 0 4 &mpic 3 1>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008000 1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + + i8259@19000 { interrupt-controller; + device_type = "interrupt-controller"; + reg = <19000 0 0 0 1>; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; - built-in; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - big-endian; + compatible = "chrp,iic"; + interrupts = <1>; + interrupt-parent = <&pci1>; }; }; + + pci@e0009000 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x15 */ + a800 0 0 1 &mpic b 1 + a800 0 0 2 &mpic b 1 + a800 0 0 3 &mpic b 1 + a800 0 0 4 &mpic b 1>; + interrupt-parent = <&mpic>; + interrupts = <19 2>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0009000 1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + }; }; diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index 3e79bf0..3f9d15c 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -30,7 +30,6 @@ timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; - 32-bit; }; }; @@ -42,19 +41,9 @@ soc8544@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; - - ranges = <00001000 e0001000 000ff000 - 80000000 80000000 20000000 - a0000000 a0000000 10000000 - b0000000 b0000000 00100000 - c0000000 c0000000 20000000 - b0100000 b0100000 00100000 - e1000000 e1000000 00010000 - e1010000 e1010000 00010000 - e1020000 e1020000 00010000>; + ranges = <00000000 e0000000 00100000>; reg = <e0000000 00001000>; // CCSRBAR 1M bus-frequency = <0>; // Filled out by uboot. @@ -149,115 +138,173 @@ interrupt-parent = <&mpic>; }; - pci@8000 { - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x11 J17 Slot 1 */ - 8800 0 0 1 &mpic 2 1 - 8800 0 0 2 &mpic 3 1 - 8800 0 0 3 &mpic 4 1 - 8800 0 0 4 &mpic 1 1 + global-utilities@e0000 { //global utilities block + compatible = "fsl,mpc8548-guts"; + reg = <e0000 1000>; + fsl,has-rstcr; + }; - /* IDSEL 0x12 J16 Slot 2 */ + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; - 9000 0 0 1 &mpic 3 1 - 9000 0 0 2 &mpic 4 1 - 9000 0 0 3 &mpic 2 1 - 9000 0 0 4 &mpic 1 1>; + pci@e0008000 { + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x11 J17 Slot 1 */ + 8800 0 0 1 &mpic 2 1 + 8800 0 0 2 &mpic 3 1 + 8800 0 0 3 &mpic 4 1 + 8800 0 0 4 &mpic 1 1 + + /* IDSEL 0x12 J16 Slot 2 */ + + 9000 0 0 1 &mpic 3 1 + 9000 0 0 2 &mpic 4 1 + 9000 0 0 3 &mpic 2 1 + 9000 0 0 4 &mpic 1 1>; + + interrupt-parent = <&mpic>; + interrupts = <18 2>; + bus-range = <0 ff>; + ranges = <02000000 0 c0000000 c0000000 0 20000000 + 01000000 0 00000000 e1000000 0 00010000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008000 1000>; + }; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - bus-range = <0 ff>; - ranges = <02000000 0 c0000000 c0000000 0 20000000 - 01000000 0 00000000 e1000000 0 00010000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; + pcie@e0009000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0009000 1000>; + bus-range = <0 ff>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e1010000 0 00010000>; + clock-frequency = <1fca055>; + interrupt-parent = <&mpic>; + interrupts = <1a 2>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 4 1 + 0000 0 0 2 &mpic 5 1 + 0000 0 0 3 &mpic 6 1 + 0000 0 0 4 &mpic 7 1 + >; + pcie@0 { + reg = <0 0 0 0 0>; #size-cells = <2>; #address-cells = <3>; - reg = <8000 1000>; - }; - - pcie@9000 { - compatible = "fsl,mpc8548-pcie"; device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <9000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e1010000 0 00010000>; - clock-frequency = <1fca055>; - interrupt-parent = <&mpic>; - interrupts = <1a 2>; - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 1 - 0000 0 0 2 &mpic 5 1 - 0000 0 0 3 &mpic 6 1 - 0000 0 0 4 &mpic 7 1 - >; + ranges = <02000000 0 80000000 + 02000000 0 80000000 + 0 20000000 + + 01000000 0 00000000 + 01000000 0 00000000 + 0 00010000>; }; + }; - pcie@a000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; + pcie@e000a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e000a000 1000>; + bus-range = <0 ff>; + ranges = <02000000 0 a0000000 a0000000 0 10000000 + 01000000 0 00000000 e1020000 0 00010000>; + clock-frequency = <1fca055>; + interrupt-parent = <&mpic>; + interrupts = <19 2>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 0 1 + 0000 0 0 2 &mpic 1 1 + 0000 0 0 3 &mpic 2 1 + 0000 0 0 4 &mpic 3 1 + >; + pcie@0 { + reg = <0 0 0 0 0>; #size-cells = <2>; #address-cells = <3>; - reg = <a000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 e1020000 0 00010000>; - clock-frequency = <1fca055>; - interrupt-parent = <&mpic>; - interrupts = <19 2>; - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 0 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 - >; + device_type = "pci"; + ranges = <02000000 0 a0000000 + 02000000 0 a0000000 + 0 10000000 + + 01000000 0 00000000 + 01000000 0 00000000 + 0 00010000>; }; + }; - pcie@b000 { - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; + pcie@e000b000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e000b000 1000>; + bus-range = <0 ff>; + ranges = <02000000 0 b0000000 b0000000 0 00100000 + 01000000 0 00000000 b0100000 0 00100000>; + clock-frequency = <1fca055>; + interrupt-parent = <&mpic>; + interrupts = <1b 2>; + interrupt-map-mask = <fb00 0 0 0>; + interrupt-map = < + // IDSEL 0x1c USB + e000 0 0 0 &i8259 c 2 + e100 0 0 0 &i8259 9 2 + e200 0 0 0 &i8259 a 2 + e300 0 0 0 &i8259 b 2 + + // IDSEL 0x1d Audio + e800 0 0 0 &i8259 6 2 + + // IDSEL 0x1e Legacy + f000 0 0 0 &i8259 7 2 + f100 0 0 0 &i8259 7 2 + + // IDSEL 0x1f IDE/SATA + f800 0 0 0 &i8259 e 2 + f900 0 0 0 &i8259 5 2 + >; + + pcie@0 { + reg = <0 0 0 0 0>; #size-cells = <2>; #address-cells = <3>; - reg = <b000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 b0000000 b0000000 0 00100000 - 01000000 0 00000000 b0100000 0 00100000>; - clock-frequency = <1fca055>; - interrupt-parent = <&mpic>; - interrupts = <1b 2>; - interrupt-map-mask = <fb00 0 0 0>; - interrupt-map = < - // IDSEL 0x1c USB - e000 0 0 0 &i8259 c 2 - e100 0 0 0 &i8259 9 2 - e200 0 0 0 &i8259 a 2 - e300 0 0 0 &i8259 b 2 - - // IDSEL 0x1d Audio - e800 0 0 0 &i8259 6 2 - - // IDSEL 0x1e Legacy - f000 0 0 0 &i8259 7 2 - f100 0 0 0 &i8259 7 2 - - // IDSEL 0x1f IDE/SATA - f800 0 0 0 &i8259 e 2 - f900 0 0 0 &i8259 5 2 - >; + device_type = "pci"; + ranges = <02000000 0 b0000000 + 02000000 0 b0000000 + 0 00100000 + + 01000000 0 00000000 + 01000000 0 00000000 + 0 00100000>; + uli1575@0 { reg = <0 0 0 0 0>; #size-cells = <2>; @@ -265,95 +312,63 @@ ranges = <02000000 0 b0000000 02000000 0 b0000000 0 00100000 + 01000000 0 00000000 01000000 0 00000000 0 00100000>; - - pci_bridge@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <02000000 0 b0000000 - 02000000 0 b0000000 - 0 00100000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; - - isa@1e { - device_type = "isa"; + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <f000 0 0 0 0>; + ranges = <1 0 + 01000000 0 0 + 00001000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <1 20 2 + 1 a0 2 + 1 4d0 2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; #interrupt-cells = <2>; - #size-cells = <1>; - #address-cells = <2>; - reg = <f000 0 0 0 0>; - ranges = <1 0 - 01000000 0 0 - 00001000>; + compatible = "chrp,iic"; + interrupts = <9 2>; + interrupt-parent = <&mpic>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <1 60 1 1 64 1>; + interrupts = <1 3 c 3>; interrupt-parent = <&i8259>; - i8259: interrupt-controller@20 { - reg = <1 20 2 - 1 a0 2 - 1 4d0 2>; - clock-frequency = <0>; - interrupt-controller; - device_type = "interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <2>; - built-in; - compatible = "chrp,iic"; - interrupts = <9 2>; - interrupt-parent = <&mpic>; + keyboard@0 { + reg = <0>; + compatible = "pnpPNP,303"; }; - i8042@60 { - #size-cells = <0>; - #address-cells = <1>; - reg = <1 60 1 1 64 1>; - interrupts = <1 3 c 3>; - interrupt-parent = <&i8259>; - - keyboard@0 { - reg = <0>; - compatible = "pnpPNP,303"; - }; - - mouse@1 { - reg = <1>; - compatible = "pnpPNP,f03"; - }; + mouse@1 { + reg = <1>; + compatible = "pnpPNP,f03"; }; + }; - rtc@70 { - compatible = "pnpPNP,b00"; - reg = <1 70 2>; - }; + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <1 70 2>; + }; - gpio@400 { - reg = <1 400 80>; - }; + gpio@400 { + reg = <1 400 80>; }; }; }; - }; - global-utilities@e0000 { //global utilities block - compatible = "fsl,mpc8548-guts"; - reg = <e0000 1000>; - fsl,has-rstcr; - }; - - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <40000 40000>; - built-in; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - big-endian; - }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index d215d21..69ca502 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -30,7 +30,6 @@ timebase-frequency = <0>; // 33 MHz, from uboot bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot - 32-bit; }; }; @@ -42,15 +41,8 @@ soc8548@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; - ranges = <00001000 e0001000 000ff000 - 80000000 80000000 10000000 - e2000000 e2000000 00800000 - 90000000 90000000 10000000 - e2800000 e2800000 00800000 - a0000000 a0000000 20000000 - e3000000 e3000000 01000000>; + ranges = <00000000 e0000000 00100000>; reg = <e0000000 00001000>; // CCSRBAR bus-frequency = <0>; @@ -189,215 +181,225 @@ fsl,has-rstcr; }; - pci@8000 { + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; + + pci@e0008000 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x4 (PCIX Slot 2) */ + 02000 0 0 1 &mpic 0 1 + 02000 0 0 2 &mpic 1 1 + 02000 0 0 3 &mpic 2 1 + 02000 0 0 4 &mpic 3 1 + + /* IDSEL 0x5 (PCIX Slot 3) */ + 02800 0 0 1 &mpic 1 1 + 02800 0 0 2 &mpic 2 1 + 02800 0 0 3 &mpic 3 1 + 02800 0 0 4 &mpic 0 1 + + /* IDSEL 0x6 (PCIX Slot 4) */ + 03000 0 0 1 &mpic 2 1 + 03000 0 0 2 &mpic 3 1 + 03000 0 0 3 &mpic 0 1 + 03000 0 0 4 &mpic 1 1 + + /* IDSEL 0x8 (PCIX Slot 5) */ + 04000 0 0 1 &mpic 0 1 + 04000 0 0 2 &mpic 1 1 + 04000 0 0 3 &mpic 2 1 + 04000 0 0 4 &mpic 3 1 + + /* IDSEL 0xC (Tsi310 bridge) */ + 06000 0 0 1 &mpic 0 1 + 06000 0 0 2 &mpic 1 1 + 06000 0 0 3 &mpic 2 1 + 06000 0 0 4 &mpic 3 1 + + /* IDSEL 0x14 (Slot 2) */ + 0a000 0 0 1 &mpic 0 1 + 0a000 0 0 2 &mpic 1 1 + 0a000 0 0 3 &mpic 2 1 + 0a000 0 0 4 &mpic 3 1 + + /* IDSEL 0x15 (Slot 3) */ + 0a800 0 0 1 &mpic 1 1 + 0a800 0 0 2 &mpic 2 1 + 0a800 0 0 3 &mpic 3 1 + 0a800 0 0 4 &mpic 0 1 + + /* IDSEL 0x16 (Slot 4) */ + 0b000 0 0 1 &mpic 2 1 + 0b000 0 0 2 &mpic 3 1 + 0b000 0 0 3 &mpic 0 1 + 0b000 0 0 4 &mpic 1 1 + + /* IDSEL 0x18 (Slot 5) */ + 0c000 0 0 1 &mpic 0 1 + 0c000 0 0 2 &mpic 1 1 + 0c000 0 0 3 &mpic 2 1 + 0c000 0 0 4 &mpic 3 1 + + /* IDSEL 0x1C (Tsi310 bridge PCI primary) */ + 0E000 0 0 1 &mpic 0 1 + 0E000 0 0 2 &mpic 1 1 + 0E000 0 0 3 &mpic 2 1 + 0E000 0 0 4 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <18 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e2000000 0 00800000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008000 1000>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + + pci_bridge@1c { interrupt-map-mask = <f800 0 0 7>; interrupt-map = < - /* IDSEL 0x4 (PCIX Slot 2) */ - 02000 0 0 1 &mpic 0 1 - 02000 0 0 2 &mpic 1 1 - 02000 0 0 3 &mpic 2 1 - 02000 0 0 4 &mpic 3 1 - - /* IDSEL 0x5 (PCIX Slot 3) */ - 02800 0 0 1 &mpic 1 1 - 02800 0 0 2 &mpic 2 1 - 02800 0 0 3 &mpic 3 1 - 02800 0 0 4 &mpic 0 1 - - /* IDSEL 0x6 (PCIX Slot 4) */ - 03000 0 0 1 &mpic 2 1 - 03000 0 0 2 &mpic 3 1 - 03000 0 0 3 &mpic 0 1 - 03000 0 0 4 &mpic 1 1 - - /* IDSEL 0x8 (PCIX Slot 5) */ - 04000 0 0 1 &mpic 0 1 - 04000 0 0 2 &mpic 1 1 - 04000 0 0 3 &mpic 2 1 - 04000 0 0 4 &mpic 3 1 - - /* IDSEL 0xC (Tsi310 bridge) */ - 06000 0 0 1 &mpic 0 1 - 06000 0 0 2 &mpic 1 1 - 06000 0 0 3 &mpic 2 1 - 06000 0 0 4 &mpic 3 1 - - /* IDSEL 0x14 (Slot 2) */ - 0a000 0 0 1 &mpic 0 1 - 0a000 0 0 2 &mpic 1 1 - 0a000 0 0 3 &mpic 2 1 - 0a000 0 0 4 &mpic 3 1 - - /* IDSEL 0x15 (Slot 3) */ - 0a800 0 0 1 &mpic 1 1 - 0a800 0 0 2 &mpic 2 1 - 0a800 0 0 3 &mpic 3 1 - 0a800 0 0 4 &mpic 0 1 - - /* IDSEL 0x16 (Slot 4) */ - 0b000 0 0 1 &mpic 2 1 - 0b000 0 0 2 &mpic 3 1 - 0b000 0 0 3 &mpic 0 1 - 0b000 0 0 4 &mpic 1 1 - - /* IDSEL 0x18 (Slot 5) */ - 0c000 0 0 1 &mpic 0 1 - 0c000 0 0 2 &mpic 1 1 - 0c000 0 0 3 &mpic 2 1 - 0c000 0 0 4 &mpic 3 1 - - /* IDSEL 0x1C (Tsi310 bridge PCI primary) */ - 0E000 0 0 1 &mpic 0 1 - 0E000 0 0 2 &mpic 1 1 - 0E000 0 0 3 &mpic 2 1 - 0E000 0 0 4 &mpic 3 1>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 10000000 - 01000000 0 00000000 e2000000 0 00800000>; - clock-frequency = <3f940aa>; + /* IDSEL 0x00 (PrPMC Site) */ + 0000 0 0 1 &mpic 0 1 + 0000 0 0 2 &mpic 1 1 + 0000 0 0 3 &mpic 2 1 + 0000 0 0 4 &mpic 3 1 + + /* IDSEL 0x04 (VIA chip) */ + 2000 0 0 1 &mpic 0 1 + 2000 0 0 2 &mpic 1 1 + 2000 0 0 3 &mpic 2 1 + 2000 0 0 4 &mpic 3 1 + + /* IDSEL 0x05 (8139) */ + 2800 0 0 1 &mpic 1 1 + + /* IDSEL 0x06 (Slot 6) */ + 3000 0 0 1 &mpic 2 1 + 3000 0 0 2 &mpic 3 1 + 3000 0 0 3 &mpic 0 1 + 3000 0 0 4 &mpic 1 1 + + /* IDESL 0x07 (Slot 7) */ + 3800 0 0 1 &mpic 3 1 + 3800 0 0 2 &mpic 0 1 + 3800 0 0 3 &mpic 1 1 + 3800 0 0 4 &mpic 2 1>; + + reg = <e000 0 0 0 0>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <8000 1000>; - compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; - device_type = "pci"; + ranges = <02000000 0 80000000 + 02000000 0 80000000 + 0 20000000 + 01000000 0 00000000 + 01000000 0 00000000 + 0 00080000>; + clock-frequency = <1fca055>; - pci_bridge@1c { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x00 (PrPMC Site) */ - 0000 0 0 1 &mpic 0 1 - 0000 0 0 2 &mpic 1 1 - 0000 0 0 3 &mpic 2 1 - 0000 0 0 4 &mpic 3 1 - - /* IDSEL 0x04 (VIA chip) */ - 2000 0 0 1 &mpic 0 1 - 2000 0 0 2 &mpic 1 1 - 2000 0 0 3 &mpic 2 1 - 2000 0 0 4 &mpic 3 1 - - /* IDSEL 0x05 (8139) */ - 2800 0 0 1 &mpic 1 1 - - /* IDSEL 0x06 (Slot 6) */ - 3000 0 0 1 &mpic 2 1 - 3000 0 0 2 &mpic 3 1 - 3000 0 0 3 &mpic 0 1 - 3000 0 0 4 &mpic 1 1 - - /* IDESL 0x07 (Slot 7) */ - 3800 0 0 1 &mpic 3 1 - 3800 0 0 2 &mpic 0 1 - 3800 0 0 3 &mpic 1 1 - 3800 0 0 4 &mpic 2 1>; - - reg = <e000 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <02000000 0 80000000 - 02000000 0 80000000 - 0 20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00080000>; - clock-frequency = <1fca055>; - - isa@4 { - device_type = "isa"; + isa@4 { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <2000 0 0 0 0>; + ranges = <1 0 01000000 0 0 00001000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + interrupt-controller; + device_type = "interrupt-controller"; + reg = <1 20 2 + 1 a0 2 + 1 4d0 2>; + #address-cells = <0>; #interrupt-cells = <2>; - #size-cells = <1>; - #address-cells = <2>; - reg = <2000 0 0 0 0>; - ranges = <1 0 01000000 0 0 00001000>; - interrupt-parent = <&i8259>; - - i8259: interrupt-controller@20 { - clock-frequency = <0>; - interrupt-controller; - device_type = "interrupt-controller"; - reg = <1 20 2 - 1 a0 2 - 1 4d0 2>; - #address-cells = <0>; - #interrupt-cells = <2>; - built-in; - compatible = "chrp,iic"; - interrupts = <0 1>; - interrupt-parent = <&mpic>; - }; - - rtc@70 { - compatible = "pnpPNP,b00"; - reg = <1 70 2>; - }; + compatible = "chrp,iic"; + interrupts = <0 1>; + interrupt-parent = <&mpic>; }; - }; - }; - pci@9000 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x15 */ - a800 0 0 1 &mpic b 1 - a800 0 0 2 &mpic 1 1 - a800 0 0 3 &mpic 2 1 - a800 0 0 4 &mpic 3 1>; - - interrupt-parent = <&mpic>; - interrupts = <19 2>; - bus-range = <0 0>; - ranges = <02000000 0 90000000 90000000 0 10000000 - 01000000 0 00000000 e2800000 0 00800000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <9000 1000>; - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <1 70 2>; + }; + }; }; - /* PCI Express */ - pcie@a000 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < + }; - /* IDSEL 0x0 (PEX) */ - 00000 0 0 1 &mpic 0 1 - 00000 0 0 2 &mpic 1 1 - 00000 0 0 3 &mpic 2 1 - 00000 0 0 4 &mpic 3 1>; + pci@e0009000 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x15 */ + a800 0 0 1 &mpic b 1 + a800 0 0 2 &mpic 1 1 + a800 0 0 3 &mpic 2 1 + a800 0 0 4 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <19 2>; + bus-range = <0 0>; + ranges = <02000000 0 90000000 90000000 0 10000000 + 01000000 0 00000000 e2800000 0 00800000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0009000 1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + }; - interrupt-parent = <&mpic>; - interrupts = <1a 2>; - bus-range = <0 ff>; - ranges = <02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 e3000000 0 08000000>; - clock-frequency = <1fca055>; - #interrupt-cells = <1>; + pcie@e000a000 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x0 (PEX) */ + 00000 0 0 1 &mpic 0 1 + 00000 0 0 2 &mpic 1 1 + 00000 0 0 3 &mpic 2 1 + 00000 0 0 4 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <1a 2>; + bus-range = <0 ff>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 08000000>; + clock-frequency = <1fca055>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e000a000 1000>; + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + pcie@0 { + reg = <0 0 0 0 0>; #size-cells = <2>; #address-cells = <3>; - reg = <a000 1000>; - compatible = "fsl,mpc8548-pcie"; device_type = "pci"; - }; + ranges = <02000000 0 a0000000 + 02000000 0 a0000000 + 0 20000000 - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <40000 40000>; - built-in; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - big-endian; + 01000000 0 00000000 + 01000000 0 00000000 + 0 08000000>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index c3c8882..57029cc 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -30,7 +30,6 @@ timebase-frequency = <0>; // 33 MHz, from uboot bus-frequency = <0>; // 166 MHz clock-frequency = <0>; // 825 MHz, from uboot - 32-bit; }; }; @@ -42,10 +41,9 @@ soc8555@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 e0000000 00100000>; - reg = <e0000000 00100000>; // CCSRBAR 1M + reg = <e0000000 00001000>; // CCSRBAR 1M bus-frequency = <0>; memory-controller@2000 { @@ -137,113 +135,145 @@ interrupt-parent = <&mpic>; }; - pci1: pci@8000 { - interrupt-map-mask = <1f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x10 */ - 08000 0 0 1 &mpic 0 1 - 08000 0 0 2 &mpic 1 1 - 08000 0 0 3 &mpic 2 1 - 08000 0 0 4 &mpic 3 1 - - /* IDSEL 0x11 */ - 08800 0 0 1 &mpic 0 1 - 08800 0 0 2 &mpic 1 1 - 08800 0 0 3 &mpic 2 1 - 08800 0 0 4 &mpic 3 1 - - /* IDSEL 0x12 (Slot 1) */ - 09000 0 0 1 &mpic 0 1 - 09000 0 0 2 &mpic 1 1 - 09000 0 0 3 &mpic 2 1 - 09000 0 0 4 &mpic 3 1 - - /* IDSEL 0x13 (Slot 2) */ - 09800 0 0 1 &mpic 1 1 - 09800 0 0 2 &mpic 2 1 - 09800 0 0 3 &mpic 3 1 - 09800 0 0 4 &mpic 0 1 - - /* IDSEL 0x14 (Slot 3) */ - 0a000 0 0 1 &mpic 2 1 - 0a000 0 0 2 &mpic 3 1 - 0a000 0 0 3 &mpic 0 1 - 0a000 0 0 4 &mpic 1 1 - - /* IDSEL 0x15 (Slot 4) */ - 0a800 0 0 1 &mpic 3 1 - 0a800 0 0 2 &mpic 0 1 - 0a800 0 0 3 &mpic 1 1 - 0a800 0 0 4 &mpic 2 1 - - /* Bus 1 (Tundra Bridge) */ - /* IDSEL 0x12 (ISA bridge) */ - 19000 0 0 1 &mpic 0 1 - 19000 0 0 2 &mpic 1 1 - 19000 0 0 3 &mpic 2 1 - 19000 0 0 4 &mpic 3 1>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8000 1000>; - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; - - i8259@19000 { - clock-frequency = <0>; + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8555-cpm", "fsl,cpm2"; + reg = <919c0 30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 80000 10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 2000 9000 1000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8555-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <919f0 10 915f0 10>; + }; + + cpmpic: pic@90c00 { interrupt-controller; - device_type = "interrupt-controller"; - reg = <19000 0 0 0 1>; #address-cells = <0>; #interrupt-cells = <2>; - built-in; - compatible = "chrp,iic"; - big-endian; - interrupts = <1>; - interrupt-parent = <&pci1>; + interrupts = <2e 2>; + interrupt-parent = <&mpic>; + reg = <90c00 80>; + compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic"; }; }; + }; - pci@9000 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < + pci1: pci@e0008000 { + interrupt-map-mask = <1f800 0 0 7>; + interrupt-map = < - /* IDSEL 0x15 */ - a800 0 0 1 &mpic b 1 - a800 0 0 2 &mpic b 1 - a800 0 0 3 &mpic b 1 - a800 0 0 4 &mpic b 1>; - interrupt-parent = <&mpic>; - interrupts = <19 2>; - bus-range = <0 0>; - ranges = <02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 e3000000 0 00100000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <9000 1000>; - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; - }; + /* IDSEL 0x10 */ + 08000 0 0 1 &mpic 0 1 + 08000 0 0 2 &mpic 1 1 + 08000 0 0 3 &mpic 2 1 + 08000 0 0 4 &mpic 3 1 - mpic: pic@40000 { - clock-frequency = <0>; + /* IDSEL 0x11 */ + 08800 0 0 1 &mpic 0 1 + 08800 0 0 2 &mpic 1 1 + 08800 0 0 3 &mpic 2 1 + 08800 0 0 4 &mpic 3 1 + + /* IDSEL 0x12 (Slot 1) */ + 09000 0 0 1 &mpic 0 1 + 09000 0 0 2 &mpic 1 1 + 09000 0 0 3 &mpic 2 1 + 09000 0 0 4 &mpic 3 1 + + /* IDSEL 0x13 (Slot 2) */ + 09800 0 0 1 &mpic 1 1 + 09800 0 0 2 &mpic 2 1 + 09800 0 0 3 &mpic 3 1 + 09800 0 0 4 &mpic 0 1 + + /* IDSEL 0x14 (Slot 3) */ + 0a000 0 0 1 &mpic 2 1 + 0a000 0 0 2 &mpic 3 1 + 0a000 0 0 3 &mpic 0 1 + 0a000 0 0 4 &mpic 1 1 + + /* IDSEL 0x15 (Slot 4) */ + 0a800 0 0 1 &mpic 3 1 + 0a800 0 0 2 &mpic 0 1 + 0a800 0 0 3 &mpic 1 1 + 0a800 0 0 4 &mpic 2 1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 19000 0 0 1 &mpic 0 1 + 19000 0 0 2 &mpic 1 1 + 19000 0 0 3 &mpic 2 1 + 19000 0 0 4 &mpic 3 1>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008000 1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + + i8259@19000 { interrupt-controller; + device_type = "interrupt-controller"; + reg = <19000 0 0 0 1>; #address-cells = <0>; #interrupt-cells = <2>; - reg = <40000 40000>; - built-in; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - big-endian; + compatible = "chrp,iic"; + interrupts = <1>; + interrupt-parent = <&pci1>; }; }; + + pci@e0009000 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x15 */ + a800 0 0 1 &mpic b 1 + a800 0 0 2 &mpic b 1 + a800 0 0 3 &mpic b 1 + a800 0 0 4 &mpic b 1>; + interrupt-parent = <&mpic>; + interrupts = <19 2>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0009000 1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + }; }; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index 16dbe84..6b362f8 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -30,7 +30,6 @@ timebase-frequency = <04ead9a0>; bus-frequency = <13ab6680>; clock-frequency = <312c8040>; - 32-bit; }; }; @@ -42,7 +41,6 @@ soc8560@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 e0000000 00100000>; reg = <e0000000 00000200>; @@ -132,115 +130,39 @@ phy-handle = <&phy1>; }; - pci@8000 { - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; - device_type = "pci"; - reg = <8000 1000>; - clock-frequency = <3f940aa>; - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x2 */ - 1000 0 0 1 &mpic 1 1 - 1000 0 0 2 &mpic 2 1 - 1000 0 0 3 &mpic 3 1 - 1000 0 0 4 &mpic 4 1 - - /* IDSEL 0x3 */ - 1800 0 0 1 &mpic 4 1 - 1800 0 0 2 &mpic 1 1 - 1800 0 0 3 &mpic 2 1 - 1800 0 0 4 &mpic 3 1 - - /* IDSEL 0x4 */ - 2000 0 0 1 &mpic 3 1 - 2000 0 0 2 &mpic 4 1 - 2000 0 0 3 &mpic 1 1 - 2000 0 0 4 &mpic 2 1 - - /* IDSEL 0x5 */ - 2800 0 0 1 &mpic 2 1 - 2800 0 0 2 &mpic 3 1 - 2800 0 0 3 &mpic 4 1 - 2800 0 0 4 &mpic 1 1 - - /* IDSEL 12 */ - 6000 0 0 1 &mpic 1 1 - 6000 0 0 2 &mpic 2 1 - 6000 0 0 3 &mpic 3 1 - 6000 0 0 4 &mpic 4 1 - - /* IDSEL 13 */ - 6800 0 0 1 &mpic 4 1 - 6800 0 0 2 &mpic 1 1 - 6800 0 0 3 &mpic 2 1 - 6800 0 0 4 &mpic 3 1 - - /* IDSEL 14*/ - 7000 0 0 1 &mpic 3 1 - 7000 0 0 2 &mpic 4 1 - 7000 0 0 3 &mpic 1 1 - 7000 0 0 4 &mpic 2 1 - - /* IDSEL 15 */ - 7800 0 0 1 &mpic 2 1 - 7800 0 0 2 &mpic 3 1 - 7800 0 0 3 &mpic 4 1 - 7800 0 0 4 &mpic 1 1 - - /* IDSEL 18 */ - 9000 0 0 1 &mpic 1 1 - 9000 0 0 2 &mpic 2 1 - 9000 0 0 3 &mpic 3 1 - 9000 0 0 4 &mpic 4 1 - - /* IDSEL 19 */ - 9800 0 0 1 &mpic 4 1 - 9800 0 0 2 &mpic 1 1 - 9800 0 0 3 &mpic 2 1 - 9800 0 0 4 &mpic 3 1 - - /* IDSEL 20 */ - a000 0 0 1 &mpic 3 1 - a000 0 0 2 &mpic 4 1 - a000 0 0 3 &mpic 1 1 - a000 0 0 4 &mpic 2 1 - - /* IDSEL 21 */ - a800 0 0 1 &mpic 2 1 - a800 0 0 2 &mpic 3 1 - a800 0 0 3 &mpic 4 1 - a800 0 0 4 &mpic 1 1>; - - interrupt-parent = <&mpic>; - interrupts = <18 2>; - bus-range = <0 0>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 01000000>; - }; - mpic: pic@40000 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; reg = <40000 40000>; - built-in; device_type = "open-pic"; }; - cpm@e0000000 { + cpm@919c0 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "cpm"; - model = "CPM2"; - ranges = <0 0 c0000>; - reg = <80000 40000>; - command-proc = <919c0>; - brg-frequency = <9d5b340>; + compatible = "fsl,mpc8560-cpm", "fsl,cpm2"; + reg = <919c0 30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 80000 10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 4000 9000 2000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8560-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <919f0 10 915f0 10>; + clock-frequency = <d#165000000>; + }; cpmpic: pic@90c00 { interrupt-controller; @@ -249,44 +171,38 @@ interrupts = <2e 2>; interrupt-parent = <&mpic>; reg = <90c00 80>; - built-in; - device_type = "cpm-pic"; + compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic"; }; - scc@91a00 { + serial@91a00 { device_type = "serial"; - compatible = "cpm_uart"; - model = "SCC"; - device-id = <1>; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; reg = <91a00 20 88000 100>; - clock-setup = <00ffffff 0>; - rx-clock = <1>; - tx-clock = <1>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <00800000>; current-speed = <1c200>; interrupts = <28 8>; interrupt-parent = <&cpmpic>; }; - scc@91a20 { + serial@91a20 { device_type = "serial"; - compatible = "cpm_uart"; - model = "SCC"; - device-id = <2>; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; reg = <91a20 20 88100 100>; - clock-setup = <ff00ffff 90000>; - rx-clock = <2>; - tx-clock = <2>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <04a00000>; current-speed = <1c200>; interrupts = <29 8>; interrupt-parent = <&cpmpic>; }; - fcc@91320 { + ethernet@91320 { device_type = "network"; - compatible = "fs_enet"; - model = "FCC"; - device-id = <2>; - reg = <91320 20 88500 100 913a0 30>; + compatible = "fsl,mpc8560-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <91320 20 88500 100 913b0 1>; /* * mac-address is deprecated and will be removed * in 2.6.25. Only recent versions of @@ -294,20 +210,17 @@ */ mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; - clock-setup = <ff00ffff 250000>; - rx-clock = <15>; - tx-clock = <16>; + fsl,cpm-command = <16200300>; interrupts = <21 8>; interrupt-parent = <&cpmpic>; phy-handle = <&phy2>; }; - fcc@91340 { + ethernet@91340 { device_type = "network"; - compatible = "fs_enet"; - model = "FCC"; - device-id = <3>; - reg = <91340 20 88600 100 913d0 30>; + compatible = "fsl,mpc8560-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <91340 20 88600 100 913d0 1>; /* * mac-address is deprecated and will be removed * in 2.6.25. Only recent versions of @@ -315,13 +228,101 @@ */ mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; - clock-setup = <ffff00ff 3700>; - rx-clock = <17>; - tx-clock = <18>; + fsl,cpm-command = <1a400300>; interrupts = <22 8>; interrupt-parent = <&cpmpic>; phy-handle = <&phy3>; }; }; }; + + pci@e0008000 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <e0008000 1000>; + clock-frequency = <3f940aa>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x2 */ + 1000 0 0 1 &mpic 1 1 + 1000 0 0 2 &mpic 2 1 + 1000 0 0 3 &mpic 3 1 + 1000 0 0 4 &mpic 4 1 + + /* IDSEL 0x3 */ + 1800 0 0 1 &mpic 4 1 + 1800 0 0 2 &mpic 1 1 + 1800 0 0 3 &mpic 2 1 + 1800 0 0 4 &mpic 3 1 + + /* IDSEL 0x4 */ + 2000 0 0 1 &mpic 3 1 + 2000 0 0 2 &mpic 4 1 + 2000 0 0 3 &mpic 1 1 + 2000 0 0 4 &mpic 2 1 + + /* IDSEL 0x5 */ + 2800 0 0 1 &mpic 2 1 + 2800 0 0 2 &mpic 3 1 + 2800 0 0 3 &mpic 4 1 + 2800 0 0 4 &mpic 1 1 + + /* IDSEL 12 */ + 6000 0 0 1 &mpic 1 1 + 6000 0 0 2 &mpic 2 1 + 6000 0 0 3 &mpic 3 1 + 6000 0 0 4 &mpic 4 1 + + /* IDSEL 13 */ + 6800 0 0 1 &mpic 4 1 + 6800 0 0 2 &mpic 1 1 + 6800 0 0 3 &mpic 2 1 + 6800 0 0 4 &mpic 3 1 + + /* IDSEL 14*/ + 7000 0 0 1 &mpic 3 1 + 7000 0 0 2 &mpic 4 1 + 7000 0 0 3 &mpic 1 1 + 7000 0 0 4 &mpic 2 1 + + /* IDSEL 15 */ + 7800 0 0 1 &mpic 2 1 + 7800 0 0 2 &mpic 3 1 + 7800 0 0 3 &mpic 4 1 + 7800 0 0 4 &mpic 1 1 + + /* IDSEL 18 */ + 9000 0 0 1 &mpic 1 1 + 9000 0 0 2 &mpic 2 1 + 9000 0 0 3 &mpic 3 1 + 9000 0 0 4 &mpic 4 1 + + /* IDSEL 19 */ + 9800 0 0 1 &mpic 4 1 + 9800 0 0 2 &mpic 1 1 + 9800 0 0 3 &mpic 2 1 + 9800 0 0 4 &mpic 3 1 + + /* IDSEL 20 */ + a000 0 0 1 &mpic 3 1 + a000 0 0 2 &mpic 4 1 + a000 0 0 3 &mpic 1 1 + a000 0 0 4 &mpic 2 1 + + /* IDSEL 21 */ + a800 0 0 1 &mpic 2 1 + a800 0 0 2 &mpic 3 1 + a800 0 0 3 &mpic 4 1 + a800 0 0 4 &mpic 1 1>; + + interrupt-parent = <&mpic>; + interrupts = <18 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 01000000>; + }; }; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index b1dcfbe..5439437 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -34,7 +34,6 @@ timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; - 32-bit; }; }; @@ -51,10 +50,9 @@ soc8568@e0000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 e0000000 00100000>; - reg = <e0000000 00100000>; + reg = <e0000000 00001000>; bus-frequency = <0>; memory-controller@2000 { @@ -74,15 +72,24 @@ }; i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; device_type = "i2c"; compatible = "fsl-i2c"; reg = <3000 100>; interrupts = <2b 2>; interrupt-parent = <&mpic>; dfsrr; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <68>; + }; }; i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; device_type = "i2c"; compatible = "fsl-i2c"; reg = <3100 100>; @@ -97,10 +104,10 @@ device_type = "mdio"; compatible = "gianfar"; reg = <24520 20>; - phy0: ethernet-phy@0 { + phy0: ethernet-phy@7 { interrupt-parent = <&mpic>; interrupts = <1 1>; - reg = <0>; + reg = <7>; device_type = "ethernet-phy"; }; phy1: ethernet-phy@1 { @@ -176,60 +183,6 @@ fsl,has-rstcr; }; - pci@8000 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - /* IDSEL 0x12 AD18 */ - 9000 0 0 1 &mpic 5 1 - 9000 0 0 2 &mpic 6 1 - 9000 0 0 3 &mpic 7 1 - 9000 0 0 4 &mpic 4 1 - - /* IDSEL 0x13 AD19 */ - 9800 0 0 1 &mpic 6 1 - 9800 0 0 2 &mpic 7 1 - 9800 0 0 3 &mpic 4 1 - 9800 0 0 4 &mpic 5 1>; - - interrupt-parent = <&mpic>; - interrupts = <18 2>; - bus-range = <0 ff>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 00800000>; - clock-frequency = <3f940aa>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <8000 1000>; - compatible = "fsl,mpc8540-pci"; - device_type = "pci"; - }; - - /* PCI Express */ - pcie@a000 { - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - - /* IDSEL 0x0 (PEX) */ - 00000 0 0 1 &mpic 0 1 - 00000 0 0 2 &mpic 1 1 - 00000 0 0 3 &mpic 2 1 - 00000 0 0 4 &mpic 3 1>; - - interrupt-parent = <&mpic>; - interrupts = <1a 2>; - bus-range = <0 ff>; - ranges = <02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 e3000000 0 08000000>; - clock-frequency = <1fca055>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <a000 1000>; - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - }; - serial@4600 { device_type = "serial"; compatible = "ns16550"; @@ -258,11 +211,11 @@ #address-cells = <0>; #interrupt-cells = <2>; reg = <40000 40000>; - built-in; compatible = "chrp,open-pic"; device_type = "open-pic"; big-endian; }; + par_io@e0100 { reg = <e0100 100>; device_type = "par_io"; @@ -289,12 +242,13 @@ 4 1a 2 0 2 0 /* RxD7 */ 4 0b 1 0 2 0 /* TX_EN */ 4 18 1 0 2 0 /* TX_ER */ - 4 0f 2 0 2 0 /* RX_DV */ + 4 10 2 0 2 0 /* RX_DV */ 4 1e 2 0 2 0 /* RX_ER */ 4 11 2 0 2 0 /* RX_CLK */ 4 13 1 0 2 0 /* GTX_CLK */ 1 1f 2 0 3 0>; /* GTX125 */ }; + pio2: ucc_pin@02 { pio-map = < /* port pin dir open_drain assignment has_irq */ @@ -380,10 +334,10 @@ mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock = <0>; - tx-clock = <19>; - phy-handle = <&qe_phy0>; - phy-connection-type = "gmii"; + tx-clock = <20>; pio-handle = <&pio1>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; }; ucc@3000 { @@ -402,10 +356,10 @@ mac-address = [ 00 00 00 00 00 00 ]; local-mac-address = [ 00 00 00 00 00 00 ]; rx-clock = <0>; - tx-clock = <14>; - phy-handle = <&qe_phy1>; - phy-connection-type = "gmii"; + tx-clock = <20>; pio-handle = <&pio2>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; }; mdio@2120 { @@ -417,10 +371,10 @@ /* These are the same PHYs as on * gianfar's MDIO bus */ - qe_phy0: ethernet-phy@00 { + qe_phy0: ethernet-phy@07 { interrupt-parent = <&mpic>; interrupts = <1 1>; - reg = <0>; + reg = <7>; device_type = "ethernet-phy"; }; qe_phy1: ethernet-phy@01 { @@ -449,11 +403,77 @@ #address-cells = <0>; #interrupt-cells = <1>; reg = <80 80>; - built-in; big-endian; interrupts = <2e 2 2e 2>; //high:30 low:30 interrupt-parent = <&mpic>; }; }; + + pci@e0008000 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x12 AD18 */ + 9000 0 0 1 &mpic 5 1 + 9000 0 0 2 &mpic 6 1 + 9000 0 0 3 &mpic 7 1 + 9000 0 0 4 &mpic 4 1 + + /* IDSEL 0x13 AD19 */ + 9800 0 0 1 &mpic 6 1 + 9800 0 0 2 &mpic 7 1 + 9800 0 0 3 &mpic 4 1 + 9800 0 0 4 &mpic 5 1>; + + interrupt-parent = <&mpic>; + interrupts = <18 2>; + bus-range = <0 ff>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00800000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008000 1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + }; + + /* PCI Express */ + pcie@e000a000 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x0 (PEX) */ + 00000 0 0 1 &mpic 0 1 + 00000 0 0 2 &mpic 1 1 + 00000 0 0 3 &mpic 2 1 + 00000 0 0 4 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <1a 2>; + bus-range = <0 ff>; + ranges = <02000000 0 a0000000 a0000000 0 10000000 + 01000000 0 00000000 e2800000 0 00800000>; + clock-frequency = <1fca055>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e000a000 1000>; + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <02000000 0 a0000000 + 02000000 0 a0000000 + 0 10000000 + + 01000000 0 00000000 + 01000000 0 00000000 + 0 00800000>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts new file mode 100644 index 0000000..d638dee --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8572ds.dts @@ -0,0 +1,404 @@ +/* + * MPC8572 DS Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "fsl,MPC8572DS"; + compatible = "fsl,MPC8572DS"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8572@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 00000000>; // Filled by U-Boot + }; + + soc8572@ffe00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <00000000 ffe00000 00100000>; + reg = <ffe00000 00001000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed + bus-frequency = <0>; // Filled out by uboot. + + memory-controller@2000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <2000 1000>; + interrupt-parent = <&mpic>; + interrupts = <12 2>; + }; + + memory-controller@6000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <6000 1000>; + interrupt-parent = <&mpic>; + interrupts = <12 2>; + }; + + l2-cache-controller@20000 { + compatible = "fsl,mpc8572-l2-cache-controller"; + reg = <20000 1000>; + cache-line-size = <20>; // 32 bytes + cache-size = <80000>; // L2, 512K + interrupt-parent = <&mpic>; + interrupts = <10 2>; + }; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <2b 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = <2b 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <a 1>; + reg = <0>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <a 1>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <a 1>; + reg = <2>; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <a 1>; + reg = <3>; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <1d 2 1e 2 22 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <23 2 24 2 28 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + ethernet@26000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <26000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <1f 2 20 2 21 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + }; + + ethernet@27000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <27000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <25 2 26 2 27 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy3>; + phy-connection-type = "rgmii-id"; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <2a 2>; + interrupt-parent = <&mpic>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = <2a 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,mpc8572-guts"; + reg = <e0000 1000>; + fsl,has-rstcr; + }; + + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; + + pcie@ffe08000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <ffe08000 1000>; + bus-range = <0 ff>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 ffc00000 0 00010000>; + clock-frequency = <1fca055>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + interrupt-map-mask = <fb00 0 0 0>; + interrupt-map = < + /* IDSEL 0x11 - PCI slot 1 */ + 8800 0 0 1 &mpic 2 1 + 8800 0 0 2 &mpic 3 1 + 8800 0 0 3 &mpic 4 1 + 8800 0 0 4 &mpic 1 1 + + /* IDSEL 0x12 - PCI slot 2 */ + 9000 0 0 1 &mpic 3 1 + 9000 0 0 2 &mpic 4 1 + 9000 0 0 3 &mpic 1 1 + 9000 0 0 4 &mpic 2 1 + + // IDSEL 0x1c USB + e000 0 0 0 &i8259 c 2 + e100 0 0 0 &i8259 9 2 + e200 0 0 0 &i8259 a 2 + e300 0 0 0 &i8259 b 2 + + // IDSEL 0x1d Audio + e800 0 0 0 &i8259 6 2 + + // IDSEL 0x1e Legacy + f000 0 0 0 &i8259 7 2 + f100 0 0 0 &i8259 7 2 + + // IDSEL 0x1f IDE/SATA + f800 0 0 0 &i8259 e 2 + f900 0 0 0 &i8259 5 2 + + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <02000000 0 80000000 + 02000000 0 80000000 + 0 20000000 + + 01000000 0 00000000 + 01000000 0 00000000 + 0 00100000>; + uli1575@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <02000000 0 80000000 + 02000000 0 80000000 + 0 20000000 + + 01000000 0 00000000 + 01000000 0 00000000 + 0 00100000>; + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <f000 0 0 0 0>; + ranges = <1 0 01000000 0 0 + 00001000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <1 20 2 + 1 a0 2 + 1 4d0 2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <9 2>; + interrupt-parent = <&mpic>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <1 60 1 1 64 1>; + interrupts = <1 3 c 3>; + interrupt-parent = + <&i8259>; + + keyboard@0 { + reg = <0>; + compatible = "pnpPNP,303"; + }; + + mouse@1 { + reg = <1>; + compatible = "pnpPNP,f03"; + }; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <1 70 2>; + }; + + gpio@400 { + reg = <1 400 80>; + }; + }; + }; + }; + + }; + + pcie@ffe09000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <ffe09000 1000>; + bus-range = <0 ff>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 ffc10000 0 00010000>; + clock-frequency = <1fca055>; + interrupt-parent = <&mpic>; + interrupts = <1a 2>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 4 1 + 0000 0 0 2 &mpic 5 1 + 0000 0 0 3 &mpic 6 1 + 0000 0 0 4 &mpic 7 1 + >; + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <02000000 0 a0000000 + 02000000 0 a0000000 + 0 20000000 + + 01000000 0 00000000 + 01000000 0 00000000 + 0 00100000>; + }; + }; + + pcie@ffe0a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <ffe0a000 1000>; + bus-range = <0 ff>; + ranges = <02000000 0 c0000000 c0000000 0 20000000 + 01000000 0 00000000 ffc20000 0 00010000>; + clock-frequency = <1fca055>; + interrupt-parent = <&mpic>; + interrupts = <1b 2>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 0 1 + 0000 0 0 2 &mpic 1 1 + 0000 0 0 3 &mpic 2 1 + 0000 0 0 4 &mpic 3 1 + >; + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <02000000 0 c0000000 + 02000000 0 c0000000 + 0 20000000 + + 01000000 0 00000000 + 01000000 0 00000000 + 0 00100000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts new file mode 100644 index 0000000..966edf1 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -0,0 +1,191 @@ +/* + * MPC8610 HPCD Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License Version 2 as published + * by the Free Software Foundation. + */ + + +/ { + model = "MPC8610HPCD"; + compatible = "fsl,MPC8610HPCD"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8610@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <d# 32>; // bytes + i-cache-line-size = <d# 32>; // bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 20000000>; // 512M at 0x0 + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = <e0000000 1000>; + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <3000 100>; + interrupts = <2b 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <3100 100>; + interrupts = <2b 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <2a 2>; + interrupt-parent = <&mpic>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = <1c 2>; + interrupt-parent = <&mpic>; + }; + + + mpic: interrupt-controller@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + + global-utilities@e0000 { + compatible = "fsl,mpc8610-guts"; + reg = <e0000 1000>; + fsl,has-rstcr; + }; + }; + + pci@e0008000 { + compatible = "fsl,mpc8610-pci"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e0008000 1000>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e1000000 0 00100000>; + clock-frequency = <1fca055>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x11 */ + 8800 0 0 1 &mpic 4 1 + 8800 0 0 2 &mpic 5 1 + 8800 0 0 3 &mpic 6 1 + 8800 0 0 4 &mpic 7 1 + + /* IDSEL 0x12 */ + 9000 0 0 1 &mpic 5 1 + 9000 0 0 2 &mpic 6 1 + 9000 0 0 3 &mpic 7 1 + 9000 0 0 4 &mpic 4 1 + >; + }; + + pcie@e000a000 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <e000a000 1000>; + bus-range = <1 3>; + ranges = <02000000 0 a0000000 a0000000 0 10000000 + 01000000 0 00000000 e3000000 0 00100000>; + clock-frequency = <1fca055>; + interrupt-parent = <&mpic>; + interrupts = <1a 2>; + interrupt-map-mask = <f800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x1b */ + d800 0 0 1 &mpic 2 1 + + /* IDSEL 0x1c*/ + e000 0 0 1 &mpic 1 1 + e000 0 0 2 &mpic 1 1 + e000 0 0 3 &mpic 1 1 + e000 0 0 4 &mpic 1 1 + + /* IDSEL 0x1f */ + f800 0 0 1 &mpic 3 0 + f800 0 0 2 &mpic 0 1 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <02000000 0 a0000000 + 02000000 0 a0000000 + 0 10000000 + 01000000 0 00000000 + 01000000 0 00000000 + 0 00100000>; + uli1575@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <02000000 0 a0000000 + 02000000 0 a0000000 + 0 10000000 + 01000000 0 00000000 + 01000000 0 00000000 + 0 00100000>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index b0166e5..3677659 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -30,7 +30,6 @@ timebase-frequency = <0>; // 33 MHz, from uboot bus-frequency = <0>; // From uboot clock-frequency = <0>; // From uboot - 32-bit; }; PowerPC,8641@1 { device_type = "cpu"; @@ -42,7 +41,6 @@ timebase-frequency = <0>; // 33 MHz, from uboot bus-frequency = <0>; // From uboot clock-frequency = <0>; // From uboot - 32-bit; }; }; @@ -54,13 +52,8 @@ soc8641@f8000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; - ranges = <00001000 f8001000 000ff000 - 80000000 80000000 20000000 - e2000000 e2000000 00100000 - a0000000 a0000000 20000000 - e3000000 e3000000 00100000>; + ranges = <00000000 f8000000 00100000>; reg = <f8000000 00001000>; // CCSRBAR bus-frequency = <0>; @@ -211,50 +204,81 @@ interrupt-parent = <&mpic>; }; - pcie@8000 { - compatible = "fsl,mpc8641-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + + global-utilities@e0000 { + compatible = "fsl,mpc8641-guts"; + reg = <e0000 1000>; + fsl,has-rstcr; + }; + }; + + pcie@f8008000 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <f8008000 1000>; + bus-range = <0 ff>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <1fca055>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + interrupt-map-mask = <fb00 0 0 0>; + interrupt-map = < + /* IDSEL 0x11 */ + 8800 0 0 1 &i8259 9 2 + 8800 0 0 2 &i8259 a 2 + 8800 0 0 3 &i8259 b 2 + 8800 0 0 4 &i8259 c 2 + + /* IDSEL 0x12 */ + 9000 0 0 1 &i8259 a 2 + 9000 0 0 2 &i8259 b 2 + 9000 0 0 3 &i8259 c 2 + 9000 0 0 4 &i8259 9 2 + + // IDSEL 0x1c USB + e000 0 0 0 &i8259 c 2 + e100 0 0 0 &i8259 9 2 + e200 0 0 0 &i8259 a 2 + e300 0 0 0 &i8259 b 2 + + // IDSEL 0x1d Audio + e800 0 0 0 &i8259 6 2 + + // IDSEL 0x1e Legacy + f000 0 0 0 &i8259 7 2 + f100 0 0 0 &i8259 7 2 + + // IDSEL 0x1f IDE/SATA + f800 0 0 0 &i8259 e 2 + f900 0 0 0 &i8259 5 2 + >; + + pcie@0 { + reg = <0 0 0 0 0>; #size-cells = <2>; #address-cells = <3>; - reg = <8000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e2000000 0 00100000>; - clock-frequency = <1fca055>; - interrupt-parent = <&mpic>; - interrupts = <18 2>; - interrupt-map-mask = <fb00 0 0 0>; - interrupt-map = < - /* IDSEL 0x11 */ - 8800 0 0 1 &i8259 9 2 - 8800 0 0 2 &i8259 a 2 - 8800 0 0 3 &i8259 b 2 - 8800 0 0 4 &i8259 c 2 - - /* IDSEL 0x12 */ - 9000 0 0 1 &i8259 a 2 - 9000 0 0 2 &i8259 b 2 - 9000 0 0 3 &i8259 c 2 - 9000 0 0 4 &i8259 9 2 - - // IDSEL 0x1c USB - e000 0 0 0 &i8259 c 2 - e100 0 0 0 &i8259 9 2 - e200 0 0 0 &i8259 a 2 - e300 0 0 0 &i8259 b 2 - - // IDSEL 0x1d Audio - e800 0 0 0 &i8259 6 2 - - // IDSEL 0x1e Legacy - f000 0 0 0 &i8259 7 2 - f100 0 0 0 &i8259 7 2 - - // IDSEL 0x1f IDE/SATA - f800 0 0 0 &i8259 e 2 - f900 0 0 0 &i8259 5 2 - >; + device_type = "pci"; + ranges = <02000000 0 80000000 + 02000000 0 80000000 + 0 20000000 + + 01000000 0 00000000 + 01000000 0 00000000 + 0 00100000>; uli1575@0 { reg = <0 0 0 0 0>; #size-cells = <2>; @@ -265,111 +289,96 @@ 01000000 0 00000000 01000000 0 00000000 0 00100000>; + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <f000 0 0 0 0>; + ranges = <1 0 01000000 0 0 + 00001000>; + interrupt-parent = <&i8259>; - pci_bridge@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <02000000 0 80000000 - 02000000 0 80000000 - 0 20000000 - 01000000 0 00000000 - 01000000 0 00000000 - 0 00100000>; - - isa@1e { - device_type = "isa"; + i8259: interrupt-controller@20 { + reg = <1 20 2 + 1 a0 2 + 1 4d0 2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; #interrupt-cells = <2>; - #size-cells = <1>; - #address-cells = <2>; - reg = <f000 0 0 0 0>; - ranges = <1 0 01000000 0 0 - 00001000>; - interrupt-parent = <&i8259>; - - i8259: interrupt-controller@20 { - reg = <1 20 2 - 1 a0 2 - 1 4d0 2>; - clock-frequency = <0>; - interrupt-controller; - device_type = "interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <2>; - built-in; - compatible = "chrp,iic"; - interrupts = <9 2>; - interrupt-parent = - <&mpic>; - }; + compatible = "chrp,iic"; + interrupts = <9 2>; + interrupt-parent = <&mpic>; + }; - i8042@60 { - #size-cells = <0>; - #address-cells = <1>; - reg = <1 60 1 1 64 1>; - interrupts = <1 3 c 3>; - interrupt-parent = - <&i8259>; - - keyboard@0 { - reg = <0>; - compatible = "pnpPNP,303"; - }; - - mouse@1 { - reg = <1>; - compatible = "pnpPNP,f03"; - }; - }; + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <1 60 1 1 64 1>; + interrupts = <1 3 c 3>; + interrupt-parent = + <&i8259>; - rtc@70 { - compatible = - "pnpPNP,b00"; - reg = <1 70 2>; + keyboard@0 { + reg = <0>; + compatible = "pnpPNP,303"; }; - gpio@400 { - reg = <1 400 80>; + mouse@1 { + reg = <1>; + compatible = "pnpPNP,f03"; }; }; + + rtc@70 { + compatible = + "pnpPNP,b00"; + reg = <1 70 2>; + }; + + gpio@400 { + reg = <1 400 80>; + }; }; }; - }; - pcie@9000 { - compatible = "fsl,mpc8641-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; + }; + + pcie@f8009000 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <f8009000 1000>; + bus-range = <0 ff>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 00100000>; + clock-frequency = <1fca055>; + interrupt-parent = <&mpic>; + interrupts = <19 2>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 4 1 + 0000 0 0 2 &mpic 5 1 + 0000 0 0 3 &mpic 6 1 + 0000 0 0 4 &mpic 7 1 + >; + pcie@0 { + reg = <0 0 0 0 0>; #size-cells = <2>; #address-cells = <3>; - reg = <9000 1000>; - bus-range = <0 ff>; - ranges = <02000000 0 a0000000 a0000000 0 20000000 - 01000000 0 00000000 e3000000 0 00100000>; - clock-frequency = <1fca055>; - interrupt-parent = <&mpic>; - interrupts = <19 2>; - interrupt-map-mask = <f800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0000 0 0 1 &mpic 4 1 - 0000 0 0 2 &mpic 5 1 - 0000 0 0 3 &mpic 6 1 - 0000 0 0 4 &mpic 7 1 - >; - }; + device_type = "pci"; + ranges = <02000000 0 a0000000 + 02000000 0 a0000000 + 0 20000000 - mpic: pic@40000 { - clock-frequency = <0>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <40000 40000>; - built-in; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - big-endian; + 01000000 0 00000000 + 01000000 0 00000000 + 0 00100000>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts index e5e7726..90f2293 100644 --- a/arch/powerpc/boot/dts/mpc866ads.dts +++ b/arch/powerpc/boot/dts/mpc866ads.dts @@ -30,7 +30,6 @@ timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; - 32-bit; interrupts = <f 2>; // decrementer interrupt interrupt-parent = <&Mpc8xx_pic>; }; @@ -44,7 +43,6 @@ soc866@ff000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; ranges = <0 ff000000 00100000>; reg = <ff000000 00000200>; @@ -78,7 +76,6 @@ #address-cells = <0>; #interrupt-cells = <2>; reg = <0 24>; - built-in; device_type = "mpc8xx-pic"; compatible = "CPM"; }; @@ -86,7 +83,6 @@ cpm@ff000000 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "cpm"; model = "CPM"; ranges = <0 0 4000>; @@ -103,7 +99,6 @@ interrupts = <5 2 0 2>; interrupt-parent = <&Mpc8xx_pic>; reg = <930 20>; - built-in; device_type = "cpm-pic"; compatible = "CPM"; }; diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts index dc7ab9c..8848e63 100644 --- a/arch/powerpc/boot/dts/mpc885ads.dts +++ b/arch/powerpc/boot/dts/mpc885ads.dts @@ -2,6 +2,7 @@ * MPC885 ADS Device Tree Source * * Copyright 2006 MontaVista Software, Inc. + * Copyright 2007 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -12,7 +13,7 @@ / { model = "MPC885ADS"; - compatible = "mpc8xx"; + compatible = "fsl,mpc885ads"; #address-cells = <1>; #size-cells = <1>; @@ -23,161 +24,199 @@ PowerPC,885@0 { device_type = "cpu"; reg = <0>; - d-cache-line-size = <20>; // 32 bytes - i-cache-line-size = <20>; // 32 bytes - d-cache-size = <2000>; // L1, 8K - i-cache-size = <2000>; // L1, 8K + d-cache-line-size = <d#16>; + i-cache-line-size = <d#16>; + d-cache-size = <d#8192>; + i-cache-size = <d#8192>; timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; - 32-bit; interrupts = <f 2>; // decrementer interrupt - interrupt-parent = <&Mpc8xx_pic>; + interrupt-parent = <&PIC>; }; }; memory { device_type = "memory"; - reg = <00000000 800000>; + reg = <0 0>; }; - soc885@ff000000 { + localbus@ff000100 { + compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <ff000100 40>; + + ranges = < + 0 0 fe000000 00800000 + 1 0 ff080000 00008000 + 5 0 ff0a0000 00008000 + >; + + flash@0,0 { + compatible = "jedec-flash"; + reg = <0 0 800000>; + bank-width = <4>; + device-width = <1>; + }; + + board-control@1,0 { + reg = <1 0 20 5 300 4>; + compatible = "fsl,mpc885ads-bcsr"; + }; + }; + + soc@ff000000 { + compatible = "fsl,mpc885", "fsl,pq1-soc"; #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; device_type = "soc"; - ranges = <0 ff000000 00100000>; - reg = <ff000000 00000200>; + ranges = <0 ff000000 00004000>; bus-frequency = <0>; - mdio@e80 { - device_type = "mdio"; - compatible = "fs_enet"; - reg = <e80 8>; + + // Temporary -- will go away once kernel uses ranges for get_immrbase(). + reg = <ff000000 4000>; + + mdio@e00 { + compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio"; + reg = <e00 188>; #address-cells = <1>; #size-cells = <0>; - Phy0: ethernet-phy@0 { + + PHY0: ethernet-phy@0 { reg = <0>; device_type = "ethernet-phy"; }; - Phy1: ethernet-phy@1 { + + PHY1: ethernet-phy@1 { reg = <1>; device_type = "ethernet-phy"; }; - Phy2: ethernet-phy@2 { + + PHY2: ethernet-phy@2 { reg = <2>; device_type = "ethernet-phy"; }; }; - fec@e00 { + ethernet@e00 { device_type = "network"; - compatible = "fs_enet"; - model = "FEC"; - device-id = <1>; + compatible = "fsl,mpc885-fec-enet", + "fsl,pq1-fec-enet"; reg = <e00 188>; - mac-address = [ 00 00 0C 00 01 FD ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <3 1>; - interrupt-parent = <&Mpc8xx_pic>; - phy-handle = <&Phy1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; }; - fec@1e00 { + ethernet@1e00 { device_type = "network"; - compatible = "fs_enet"; - model = "FEC"; - device-id = <2>; + compatible = "fsl,mpc885-fec-enet", + "fsl,pq1-fec-enet"; reg = <1e00 188>; - mac-address = [ 00 00 0C 00 02 FD ]; + local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <7 1>; - interrupt-parent = <&Mpc8xx_pic>; - phy-handle = <&Phy2>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; }; - Mpc8xx_pic: pic@ff000000 { + PIC: interrupt-controller@0 { interrupt-controller; - #address-cells = <0>; #interrupt-cells = <2>; reg = <0 24>; - built-in; - device_type = "mpc8xx-pic"; - compatible = "CPM"; + compatible = "fsl,mpc885-pic", "fsl,pq1-pic"; }; - pcmcia@0080 { + pcmcia@80 { #address-cells = <3>; #interrupt-cells = <1>; #size-cells = <2>; compatible = "fsl,pq-pcmcia"; device_type = "pcmcia"; reg = <80 80>; - interrupt-parent = <&Mpc8xx_pic>; + interrupt-parent = <&PIC>; interrupts = <d 1>; }; - cpm@ff000000 { + cpm@9c0 { #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <2>; - device_type = "cpm"; - model = "CPM"; - ranges = <0 0 4000>; - reg = <860 f0>; + compatible = "fsl,mpc885-cpm", "fsl,cpm1"; command-proc = <9c0>; - brg-frequency = <0>; - interrupts = <0 2>; // cpm error interrupt - interrupt-parent = <&Cpm_pic>; + interrupts = <0>; // cpm error interrupt + interrupt-parent = <&CPM_PIC>; + reg = <9c0 40>; + ranges; + + muram@2000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 2000 2000>; - Cpm_pic: pic@930 { + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 1c00>; + }; + }; + + brg@9f0 { + compatible = "fsl,mpc885-brg", + "fsl,cpm1-brg", + "fsl,cpm-brg"; + reg = <9f0 10>; + }; + + CPM_PIC: interrupt-controller@930 { interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; + #interrupt-cells = <1>; interrupts = <5 2 0 2>; - interrupt-parent = <&Mpc8xx_pic>; + interrupt-parent = <&PIC>; reg = <930 20>; - built-in; - device_type = "cpm-pic"; - compatible = "CPM"; + compatible = "fsl,mpc885-cpm-pic", + "fsl,cpm1-pic"; }; - smc@a80 { + serial@a80 { device_type = "serial"; - compatible = "cpm_uart"; - model = "SMC"; - device-id = <1>; + compatible = "fsl,mpc885-smc-uart", + "fsl,cpm1-smc-uart"; reg = <a80 10 3e80 40>; - clock-setup = <00ffffff 0>; - rx-clock = <1>; - tx-clock = <1>; - current-speed = <0>; - interrupts = <4 3>; - interrupt-parent = <&Cpm_pic>; + interrupts = <4>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0090>; }; - smc@a90 { + serial@a90 { device_type = "serial"; - compatible = "cpm_uart"; - model = "SMC"; - device-id = <2>; - reg = <a90 20 3f80 40>; - clock-setup = <ff00ffff 90000>; - rx-clock = <2>; - tx-clock = <2>; - current-speed = <0>; - interrupts = <3 3>; - interrupt-parent = <&Cpm_pic>; + compatible = "fsl,mpc885-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <a90 10 3f80 40>; + interrupts = <3>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <00d0>; }; - scc@a40 { + ethernet@a40 { device_type = "network"; - compatible = "fs_enet"; - model = "SCC"; - device-id = <3>; - reg = <a40 18 3e00 80>; - mac-address = [ 00 00 0C 00 03 FD ]; - interrupts = <1c 3>; - interrupt-parent = <&Cpm_pic>; - phy-handle = <&Phy2>; + compatible = "fsl,mpc885-scc-enet", + "fsl,cpm1-scc-enet"; + reg = <a40 18 3e00 100>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <1c>; + interrupt-parent = <&CPM_PIC>; + phy-handle = <&PHY2>; + fsl,cpm-command = <0080>; + linux,network-index = <2>; }; }; }; + + chosen { + linux,stdout-path = "/soc/cpm/serial@a80"; + }; }; diff --git a/arch/powerpc/boot/dts/pq2fads.dts b/arch/powerpc/boot/dts/pq2fads.dts new file mode 100644 index 0000000..2d564921 --- /dev/null +++ b/arch/powerpc/boot/dts/pq2fads.dts @@ -0,0 +1,240 @@ +/* + * Device Tree for the PQ2FADS-ZU board with an MPC8280 chip. + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "pq2fads"; + compatible = "fsl,pq2fads"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <d#32>; + i-cache-line-size = <d#32>; + d-cache-size = <d#16384>; + i-cache-size = <d#16384>; + timebase-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; + }; + + localbus@f0010100 { + compatible = "fsl,mpc8280-localbus", + "fsl,pq2-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <f0010100 60>; + + ranges = <0 0 fe000000 00800000 + 1 0 f4500000 00008000 + 8 0 f8200000 00008000>; + + flash@0,0 { + compatible = "jedec-flash"; + reg = <0 0 800000>; + bank-width = <4>; + device-width = <1>; + }; + + bcsr@1,0 { + reg = <1 0 20>; + compatible = "fsl,pq2fads-bcsr"; + }; + + PCI_PIC: pic@8,0 { + #interrupt-cells = <1>; + interrupt-controller; + reg = <8 0 8>; + compatible = "fsl,pq2ads-pci-pic"; + interrupt-parent = <&PIC>; + interrupts = <18 8>; + }; + }; + + pci@f0010800 { + device_type = "pci"; + reg = <f0010800 10c f00101ac 8 f00101c4 8>; + compatible = "fsl,mpc8280-pci", "fsl,pq2-pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + clock-frequency = <d#66000000>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x16 */ + b000 0 0 1 &PCI_PIC 0 + b000 0 0 2 &PCI_PIC 1 + b000 0 0 3 &PCI_PIC 2 + b000 0 0 4 &PCI_PIC 3 + + /* IDSEL 0x17 */ + b800 0 0 1 &PCI_PIC 4 + b800 0 0 2 &PCI_PIC 5 + b800 0 0 3 &PCI_PIC 6 + b800 0 0 4 &PCI_PIC 7 + + /* IDSEL 0x18 */ + c000 0 0 1 &PCI_PIC 8 + c000 0 0 2 &PCI_PIC 9 + c000 0 0 3 &PCI_PIC a + c000 0 0 4 &PCI_PIC b>; + + interrupt-parent = <&PIC>; + interrupts = <12 8>; + ranges = <42000000 0 80000000 80000000 0 20000000 + 02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 f6000000 0 02000000>; + }; + + soc@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8280", "fsl,pq2-soc"; + ranges = <00000000 f0000000 00053000>; + + // Temporary -- will go away once kernel uses ranges for get_immrbase(). + reg = <f0000000 00053000>; + + cpm@119c0 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + compatible = "fsl,mpc8280-cpm", "fsl,cpm2"; + reg = <119c0 30>; + ranges; + + muram@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 2000 9800 800>; + }; + }; + + brg@119f0 { + compatible = "fsl,mpc8280-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <119f0 10 115f0 10>; + }; + + serial@11a00 { + device_type = "serial"; + compatible = "fsl,mpc8280-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <11a00 20 8000 100>; + interrupts = <28 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <00800000>; + }; + + serial@11a20 { + device_type = "serial"; + compatible = "fsl,mpc8280-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <11a20 20 8100 100>; + interrupts = <29 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <04a00000>; + }; + + ethernet@11320 { + device_type = "network"; + compatible = "fsl,mpc8280-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <11320 20 8500 100 113b0 1>; + interrupts = <21 8>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; + fsl,cpm-command = <16200300>; + }; + + ethernet@11340 { + device_type = "network"; + compatible = "fsl,mpc8280-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <11340 20 8600 100 113d0 1>; + interrupts = <22 8>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; + fsl,cpm-command = <1a400300>; + local-mac-address = [00 e0 0c 00 79 01]; + }; + + mdio@10d40 { + device_type = "mdio"; + compatible = "fsl,pq2fads-mdio-bitbang", + "fsl,mpc8280-mdio-bitbang", + "fsl,cpm2-mdio-bitbang"; + #address-cells = <1>; + #size-cells = <0>; + reg = <10d40 14>; + fsl,mdio-pin = <9>; + fsl,mdc-pin = <a>; + + PHY0: ethernet-phy@0 { + interrupt-parent = <&PIC>; + interrupts = <19 2>; + reg = <0>; + device_type = "ethernet-phy"; + }; + + PHY1: ethernet-phy@1 { + interrupt-parent = <&PIC>; + interrupts = <19 2>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + usb@11b60 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8280-usb", + "fsl,cpm2-usb"; + reg = <11b60 18 8b00 100>; + interrupt-parent = <&PIC>; + interrupts = <b 8>; + fsl,cpm-command = <2e600000>; + }; + }; + + PIC: interrupt-controller@10c00 { + #interrupt-cells = <2>; + interrupt-controller; + reg = <10c00 80>; + compatible = "fsl,mpc8280-pic", "fsl,cpm2-pic"; + }; + + }; + + chosen { + linux,stdout-path = "/soc/cpm/serial@11a00"; + }; +}; diff --git a/arch/powerpc/boot/dts/prpmc2800.dts b/arch/powerpc/boot/dts/prpmc2800.dts index 5300b50..297dfa5 100644 --- a/arch/powerpc/boot/dts/prpmc2800.dts +++ b/arch/powerpc/boot/dts/prpmc2800.dts @@ -9,10 +9,6 @@ * * Property values that are labeled as "Default" will be updated by bootwrapper * if it can determine the exact PrPMC type. - * - * To build: - * dtc -I dts -O asm -o prpmc2800.S -b 0 prpmc2800.dts - * dtc -I dts -O dtb -o prpmc2800.dtb -b 0 prpmc2800.dts */ / { @@ -47,7 +43,6 @@ mv64x60@f1000000 { /* Marvell Discovery */ #address-cells = <1>; #size-cells = <1>; - #interrupt-cells = <1>; model = "mv64360"; /* Default */ compatible = "marvell,mv64x60"; clock-frequency = <7f28155>; /* 133.333333 MHz */ diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts new file mode 100644 index 0000000..36be75b --- /dev/null +++ b/arch/powerpc/boot/dts/sequoia.dts @@ -0,0 +1,302 @@ +/* + * Device Tree Source for AMCC Sequoia + * + * Based on Bamboo code by Josh Boyer <jwboyer@linux.vnet.ibm.com> + * Copyright (c) 2006, 2007 IBM Corp. + * + * FIXME: Draft only! + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,sequoia"; + compatible = "amcc,sequoia"; + dcr-parent = <&/cpus/PowerPC,440EPx@0>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,440EPx@0 { + device_type = "cpu"; + reg = <0>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <8000>; + d-cache-size = <8000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440epx","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440epx","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-440epx","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0e0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1c 4 1d 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440epx", "ibm,sdr-440ep"; + dcr-reg = <00e 002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440epx", "ibm,cpr-440ep"; + dcr-reg = <00c 002>; + }; + + plb { + compatible = "ibm,plb-440epx", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + device_type = "memory-controller"; + compatible = "ibm,sdram-440epx", "ibm,sdram-44x-ddr2denali"; + dcr-reg = <010 2>; + }; + + DMA0: dma { + compatible = "ibm,dma-440epx", "ibm,dma-4xx"; + dcr-reg = <100 027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440epx", "ibm,mcmal2"; + dcr-reg = <180 62>; + num-tx-chans = <2>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 + /*RXEOB*/ 1 &UIC0 b 4 + /*SERR*/ 2 &UIC1 0 4 + /*TXDE*/ 3 &UIC1 1 4 + /*RXDE*/ 4 &UIC1 2 4>; + interrupt-map-mask = <ffffffff>; + }; + + POB0: opb { + compatible = "ibm,opb-440epx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <00000000 1 00000000 80000000 + 80000000 1 80000000 80000000>; + interrupt-parent = <&UIC1>; + interrupts = <7 4>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440epx", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + interrupts = <5 1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl256n", "cfi-flash"; + bank-width = <2>; + reg = <0 000000 4000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Kernel"; + reg = <0 180000>; + }; + partition@180000 { + label = "ramdisk"; + reg = <180000 200000>; + }; + partition@380000 { + label = "file system"; + reg = <380000 3aa0000>; + }; + partition@3e20000 { + label = "kozio"; + reg = <3e20000 140000>; + }; + partition@3f60000 { + label = "env"; + reg = <3f60000 40000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <3fa0000 60000>; + }; + }; + + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <1c200>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600400 8>; + virtual-reg = <ef600400>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600500 8>; + virtual-reg = <ef600500>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <3 4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600600 8>; + virtual-reg = <ef600600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <4 4>; + }; + + IIC0: i2c@ef600700 { + device_type = "i2c"; + compatible = "ibm,iic-440epx", "ibm,iic"; + reg = <ef600700 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@ef600800 { + device_type = "i2c"; + compatible = "ibm,iic-440epx", "ibm,iic"; + reg = <ef600800 14>; + interrupt-parent = <&UIC0>; + interrupts = <7 4>; + }; + + ZMII0: emac-zmii@ef600d00 { + device_type = "zmii-interface"; + compatible = "ibm,zmii-440epx", "ibm,zmii"; + reg = <ef600d00 c>; + }; + + EMAC0: ethernet@ef600e00 { + linux,network-index = <0>; + device_type = "network"; + compatible = "ibm,emac-440epx", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC0 18 4 + /*Wake*/ 1 &UIC1 1d 4>; + reg = <ef600e00 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + + EMAC1: ethernet@ef600f00 { + linux,network-index = <1>; + device_type = "network"; + compatible = "ibm,emac-440epx", "ibm,emac4"; + interrupt-parent = <&EMAC1>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC0 19 4 + /*Wake*/ 1 &UIC1 1f 4>; + reg = <ef600f00 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + }; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + bootargs = "console=ttyS0,115200"; + }; +}; diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts new file mode 100644 index 0000000..ec54f4e --- /dev/null +++ b/arch/powerpc/boot/dts/walnut.dts @@ -0,0 +1,190 @@ +/* + * Device Tree Source for IBM Walnut + * + * Copyright 2007 IBM Corp. + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "ibm,walnut"; + compatible = "ibm,walnut"; + dcr-parent = <&/cpus/PowerPC,405GP@0>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,405GP@0 { + device_type = "cpu"; + reg = <0>; + clock-frequency = <bebc200>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <4000>; + d-cache-size = <4000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 9>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + plb { + compatible = "ibm,plb3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-405gp"; + dcr-reg = <010 2>; + }; + + MAL: mcmal { + compatible = "ibm,mcmal-405gp", "ibm,mcmal"; + dcr-reg = <180 62>; + num-tx-chans = <2>; + num-rx-chans = <1>; + interrupt-parent = <&UIC0>; + interrupts = <a 4 b 4 c 4 d 4 e 4>; + }; + + POB0: opb { + compatible = "ibm,opb-405gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <ef600000 ef600000 a00000>; + dcr-reg = <0a0 5>; + clock-frequency = <0>; /* Filled in by zImage */ + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <2580>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600400 8>; + virtual-reg = <ef600400>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <2580>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + IIC: i2c@ef600500 { + compatible = "ibm,iic-405gp", "ibm,iic"; + reg = <ef600500 11>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + GPIO: gpio@ef600700 { + compatible = "ibm,gpio-405gp"; + reg = <ef600700 20>; + }; + + EMAC: ethernet@ef600800 { + linux,network-index = <0>; + device_type = "network"; + compatible = "ibm,emac-405gp", "ibm,emac"; + interrupt-parent = <&UIC0>; + interrupts = <9 4 f 4>; + reg = <ef600800 70>; + mal-device = <&MAL>; + mal-tx-channel = <0 1>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000001>; + }; + + }; + + EBC0: ebc { + compatible = "ibm,ebc-405gp", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + /* The ranges property is supplied by the bootwrapper + * and is based on the firmware's configuration of the + * EBC bridge + */ + clock-frequency = <0>; /* Filled in by zImage */ + + sram@0,0 { + reg = <0 0 80000>; + }; + + flash@0,80000 { + compatible = "jedec-flash"; + bank-width = <1>; + reg = <0 80000 80000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "OpenBIOS"; + reg = <0 80000>; + read-only; + }; + }; + + ds1743@1,0 { + /* NVRAM and RTC */ + compatible = "ds1743"; + reg = <1 0 2000>; + }; + + keyboard@2,0 { + compatible = "intel,82C42PC"; + reg = <2 0 2>; + }; + + ir@3,0 { + compatible = "ti,TIR2000PAG"; + reg = <3 0 10>; + }; + + fpga@7,0 { + compatible = "Walnut-FPGA"; + reg = <7 0 10>; + virtual-reg = <f0300005>; + }; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + }; +}; diff --git a/arch/powerpc/boot/ebony.c b/arch/powerpc/boot/ebony.c index 75daeda..86c0f5d 100644 --- a/arch/powerpc/boot/ebony.c +++ b/arch/powerpc/boot/ebony.c @@ -24,12 +24,11 @@ #include "page.h" #include "ops.h" #include "reg.h" +#include "io.h" #include "dcr.h" +#include "4xx.h" #include "44x.h" -extern char _dtb_start[]; -extern char _dtb_end[]; - static u8 *ebony_mac0, *ebony_mac1; /* Calculate 440GP clocks */ @@ -92,15 +91,53 @@ void ibm440gp_fixup_clocks(unsigned int sysclk, unsigned int ser_clk) dt_fixup_clock("/plb/opb/serial@40000300", uart1); } +#define EBONY_FPGA_PATH "/plb/opb/ebc/fpga" +#define EBONY_FPGA_FLASH_SEL 0x01 +#define EBONY_SMALL_FLASH_PATH "/plb/opb/ebc/small-flash" + +static void ebony_flashsel_fixup(void) +{ + void *devp; + u32 reg[3] = {0x0, 0x0, 0x80000}; + u8 *fpga; + u8 fpga_reg0 = 0x0; + + devp = finddevice(EBONY_FPGA_PATH); + if (!devp) + fatal("Couldn't locate FPGA node %s\n\r", EBONY_FPGA_PATH); + + if (getprop(devp, "virtual-reg", &fpga, sizeof(fpga)) != sizeof(fpga)) + fatal("%s has missing or invalid virtual-reg property\n\r", + EBONY_FPGA_PATH); + + fpga_reg0 = in_8(fpga); + + devp = finddevice(EBONY_SMALL_FLASH_PATH); + if (!devp) + fatal("Couldn't locate small flash node %s\n\r", + EBONY_SMALL_FLASH_PATH); + + if (getprop(devp, "reg", reg, sizeof(reg)) != sizeof(reg)) + fatal("%s has reg property of unexpected size\n\r", + EBONY_SMALL_FLASH_PATH); + + /* Invert address bit 14 (IBM-endian) if FLASH_SEL fpga bit is set */ + if (fpga_reg0 & EBONY_FPGA_FLASH_SEL) + reg[1] ^= 0x80000; + + setprop(devp, "reg", reg, sizeof(reg)); +} + static void ebony_fixups(void) { // FIXME: sysclk should be derived by reading the FPGA registers unsigned long sysclk = 33000000; ibm440gp_fixup_clocks(sysclk, 6 * 1843200); - ibm44x_fixup_memsize(); + ibm4xx_fixup_memsize(); dt_fixup_mac_addresses(ebony_mac0, ebony_mac1); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); + ebony_flashsel_fixup(); } void ebony_init(void *mac0, void *mac1) diff --git a/arch/powerpc/boot/ep88xc.c b/arch/powerpc/boot/ep88xc.c new file mode 100644 index 0000000..6b87cdc --- /dev/null +++ b/arch/powerpc/boot/ep88xc.c @@ -0,0 +1,54 @@ +/* + * Embedded Planet EP88xC with PlanetCore firmware + * + * Author: Scott Wood <scottwood@freescale.com> + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "planetcore.h" +#include "mpc8xx.h" + +static char *table; +static u64 mem_size; + +static void platform_fixups(void) +{ + u64 val; + + dt_fixup_memory(0, mem_size); + planetcore_set_mac_addrs(table); + + if (!planetcore_get_decimal(table, PLANETCORE_KEY_CRYSTAL_HZ, &val)) { + printf("No PlanetCore crystal frequency key.\r\n"); + return; + } + + mpc885_fixup_clocks(val); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + table = (char *)r3; + planetcore_prepare_table(table); + + if (!planetcore_get_decimal(table, PLANETCORE_KEY_MB_RAM, &mem_size)) + return; + + mem_size *= 1024 * 1024; + simple_alloc_init(_end, mem_size - (unsigned long)_end, 32, 64); + + ft_init(_dtb_start, _dtb_end - _dtb_start, 32); + + planetcore_set_stdout_path(table); + + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/boot/fixed-head.S b/arch/powerpc/boot/fixed-head.S new file mode 100644 index 0000000..8e14cd9 --- /dev/null +++ b/arch/powerpc/boot/fixed-head.S @@ -0,0 +1,4 @@ + .text + .global _zimage_start +_zimage_start: + b _zimage_start_lib diff --git a/arch/powerpc/boot/flatdevtree.c b/arch/powerpc/boot/flatdevtree.c index 13761bf..cf30675 100644 --- a/arch/powerpc/boot/flatdevtree.c +++ b/arch/powerpc/boot/flatdevtree.c @@ -354,16 +354,21 @@ static void ft_put_bin(struct ft_cxt *cxt, const void *data, unsigned int sz) cxt->p += sza; } -int ft_begin_node(struct ft_cxt *cxt, const char *name) +char *ft_begin_node(struct ft_cxt *cxt, const char *name) { unsigned long nlen = strlen(name) + 1; unsigned long len = 8 + _ALIGN(nlen, 4); + char *ret; if (!ft_make_space(cxt, &cxt->p, FT_STRUCT, len)) - return -1; + return NULL; + + ret = cxt->p; + ft_put_word(cxt, OF_DT_BEGIN_NODE); ft_put_bin(cxt, name, strlen(name) + 1); - return 0; + + return ret; } void ft_end_node(struct ft_cxt *cxt) @@ -625,25 +630,17 @@ void ft_end_tree(struct ft_cxt *cxt) bph->dt_strings_size = cpu_to_be32(ssize); } -void *ft_find_device(struct ft_cxt *cxt, const char *srch_path) -{ - char *node; - - /* require absolute path */ - if (srch_path[0] != '/') - return NULL; - node = ft_find_descendent(cxt, ft_root_node(cxt), srch_path); - return ft_get_phandle(cxt, node); -} - -void *ft_find_device_rel(struct ft_cxt *cxt, const void *top, - const char *srch_path) +void *ft_find_device(struct ft_cxt *cxt, const void *top, const char *srch_path) { char *node; - node = ft_node_ph2node(cxt, top); - if (node == NULL) - return NULL; + if (top) { + node = ft_node_ph2node(cxt, top); + if (node == NULL) + return NULL; + } else { + node = ft_root_node(cxt); + } node = ft_find_descendent(cxt, node, srch_path); return ft_get_phandle(cxt, node); @@ -945,7 +942,7 @@ int ft_del_prop(struct ft_cxt *cxt, const void *phandle, const char *propname) void *ft_create_node(struct ft_cxt *cxt, const void *parent, const char *name) { struct ft_atom atom; - char *p, *next; + char *p, *next, *ret; int depth = 0; if (parent) { @@ -970,11 +967,70 @@ void *ft_create_node(struct ft_cxt *cxt, const void *parent, const char *name) break; /* end of node, insert here */ cxt->p = p; - ft_begin_node(cxt, name); + ret = ft_begin_node(cxt, name); ft_end_node(cxt); - return p; + return ft_get_phandle(cxt, ret); } p = next; } return NULL; } + +/* Returns the start of the path within the provided buffer, or NULL on + * error. + */ +char *ft_get_path(struct ft_cxt *cxt, const void *phandle, + char *buf, int len) +{ + const char *path_comp[FT_MAX_DEPTH]; + struct ft_atom atom; + char *p, *next, *pos; + int depth = 0, i; + void *node; + + node = ft_node_ph2node(cxt, phandle); + if (node == NULL) + return NULL; + + p = ft_root_node(cxt); + + while ((next = ft_next(cxt, p, &atom)) != NULL) { + switch (atom.tag) { + case OF_DT_BEGIN_NODE: + path_comp[depth++] = atom.name; + if (p == node) + goto found; + + break; + + case OF_DT_END_NODE: + if (--depth == 0) + return NULL; + } + + p = next; + } + +found: + pos = buf; + for (i = 1; i < depth; i++) { + int this_len; + + if (len <= 1) + return NULL; + + *pos++ = '/'; + len--; + + strncpy(pos, path_comp[i], len); + + if (pos[len - 1] != 0) + return NULL; + + this_len = strlen(pos); + len -= this_len; + pos += this_len; + } + + return buf; +} diff --git a/arch/powerpc/boot/flatdevtree.h b/arch/powerpc/boot/flatdevtree.h index cb26325..b0957a2 100644 --- a/arch/powerpc/boot/flatdevtree.h +++ b/arch/powerpc/boot/flatdevtree.h @@ -76,7 +76,7 @@ struct ft_cxt { unsigned int nodes_used; }; -int ft_begin_node(struct ft_cxt *cxt, const char *name); +char *ft_begin_node(struct ft_cxt *cxt, const char *name); void ft_end_node(struct ft_cxt *cxt); void ft_begin_tree(struct ft_cxt *cxt); @@ -96,9 +96,8 @@ int ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size); void ft_dump_blob(const void *bphp); void ft_merge_blob(struct ft_cxt *cxt, void *blob); -void *ft_find_device(struct ft_cxt *cxt, const char *srch_path); -void *ft_find_device_rel(struct ft_cxt *cxt, const void *top, - const char *srch_path); +void *ft_find_device(struct ft_cxt *cxt, const void *top, + const char *srch_path); void *ft_find_descendent(struct ft_cxt *cxt, void *top, const char *srch_path); int ft_get_prop(struct ft_cxt *cxt, const void *phandle, const char *propname, void *buf, const unsigned int buflen); @@ -109,5 +108,6 @@ void *ft_find_node_by_prop_value(struct ft_cxt *cxt, const void *prev, const char *propname, const char *propval, int proplen); void *ft_create_node(struct ft_cxt *cxt, const void *parent, const char *name); +char *ft_get_path(struct ft_cxt *cxt, const void *phandle, char *buf, int len); #endif /* FLATDEVTREE_H */ diff --git a/arch/powerpc/boot/flatdevtree_env.h b/arch/powerpc/boot/flatdevtree_env.h index 83bc1c7..ad0420d 100644 --- a/arch/powerpc/boot/flatdevtree_env.h +++ b/arch/powerpc/boot/flatdevtree_env.h @@ -24,24 +24,4 @@ #define be64_to_cpu(x) (x) #define cpu_to_be64(x) (x) -static inline int strncmp(const char *cs, const char *ct, size_t count) -{ - signed char __res = 0; - - while (count) { - if ((__res = *cs - *ct++) != 0 || !*cs++) - break; - count--; - } - return __res; -} - -static inline char *strchr(const char *s, int c) -{ - for (; *s != (char)c; ++s) - if (*s == '\0') - return NULL; - return (char *)s; -} - #endif /* _PPC_BOOT_FLATDEVTREE_ENV_H_ */ diff --git a/arch/powerpc/boot/flatdevtree_misc.c b/arch/powerpc/boot/flatdevtree_misc.c index 4341e65..b367009 100644 --- a/arch/powerpc/boot/flatdevtree_misc.c +++ b/arch/powerpc/boot/flatdevtree_misc.c @@ -18,7 +18,7 @@ static struct ft_cxt cxt; static void *fdtm_finddevice(const char *name) { - return ft_find_device(&cxt, name); + return ft_find_device(&cxt, NULL, name); } static int fdtm_getprop(const void *phandle, const char *propname, @@ -58,6 +58,11 @@ static unsigned long fdtm_finalize(void) return (unsigned long)cxt.bph; } +static char *fdtm_get_path(const void *phandle, char *buf, int len) +{ + return ft_get_path(&cxt, phandle, buf, len); +} + int ft_init(void *dt_blob, unsigned int max_size, unsigned int max_find_device) { dt_ops.finddevice = fdtm_finddevice; @@ -67,6 +72,7 @@ int ft_init(void *dt_blob, unsigned int max_size, unsigned int max_find_device) dt_ops.create_node = fdtm_create_node; dt_ops.find_node_by_prop_value = fdtm_find_node_by_prop_value; dt_ops.finalize = fdtm_finalize; + dt_ops.get_path = fdtm_get_path; return ft_open(&cxt, dt_blob, max_size, max_find_device, platform_ops.realloc); diff --git a/arch/powerpc/boot/fsl-soc.c b/arch/powerpc/boot/fsl-soc.c new file mode 100644 index 0000000..b835ed6 --- /dev/null +++ b/arch/powerpc/boot/fsl-soc.c @@ -0,0 +1,57 @@ +/* + * Freescale SOC support functions + * + * Author: Scott Wood <scottwood@freescale.com> + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "types.h" +#include "fsl-soc.h" +#include "stdio.h" + +static u32 prop_buf[MAX_PROP_LEN / 4]; + +u32 *fsl_get_immr(void) +{ + void *soc; + unsigned long ret = 0; + + soc = find_node_by_devtype(NULL, "soc"); + if (soc) { + int size; + u32 naddr; + + size = getprop(soc, "#address-cells", prop_buf, MAX_PROP_LEN); + if (size == 4) + naddr = prop_buf[0]; + else + naddr = 2; + + if (naddr != 1 && naddr != 2) + goto err; + + size = getprop(soc, "ranges", prop_buf, MAX_PROP_LEN); + + if (size < 12) + goto err; + if (prop_buf[0] != 0) + goto err; + if (naddr == 2 && prop_buf[1] != 0) + goto err; + + if (!dt_xlate_addr(soc, prop_buf + naddr, 8, &ret)) + ret = 0; + } + +err: + if (!ret) + printf("fsl_get_immr: Failed to find immr base\r\n"); + + return (u32 *)ret; +} diff --git a/arch/powerpc/boot/fsl-soc.h b/arch/powerpc/boot/fsl-soc.h new file mode 100644 index 0000000..5da26fc --- /dev/null +++ b/arch/powerpc/boot/fsl-soc.h @@ -0,0 +1,8 @@ +#ifndef _PPC_BOOT_FSL_SOC_H_ +#define _PPC_BOOT_FSL_SOC_H_ + +#include "types.h" + +u32 *fsl_get_immr(void); + +#endif diff --git a/arch/powerpc/boot/gunzip_util.c b/arch/powerpc/boot/gunzip_util.c index df8ab07..ef2aed0 100644 --- a/arch/powerpc/boot/gunzip_util.c +++ b/arch/powerpc/boot/gunzip_util.c @@ -78,6 +78,7 @@ void gunzip_start(struct gunzip_state *state, void *src, int srclen) fatal("inflateInit2 returned %d\n\r", r); } + state->s.total_in = hdrlen; state->s.next_in = src + hdrlen; state->s.avail_in = srclen - hdrlen; } @@ -193,13 +194,10 @@ int gunzip_finish(struct gunzip_state *state, void *dst, int dstlen) { int len; + len = gunzip_partial(state, dst, dstlen); + if (state->s.workspace) { - len = gunzip_partial(state, dst, dstlen); zlib_inflateEnd(&state->s); - } else { - /* uncompressed image */ - len = min(state->s.avail_in, (unsigned)dstlen); - memcpy(dst, state->s.next_in, len); } return len; diff --git a/arch/powerpc/boot/holly.c b/arch/powerpc/boot/holly.c index 7d6539f..199e783 100644 --- a/arch/powerpc/boot/holly.c +++ b/arch/powerpc/boot/holly.c @@ -21,11 +21,6 @@ #include "ops.h" #include "io.h" -extern char _start[]; -extern char _end[]; -extern char _dtb_start[]; -extern char _dtb_end[]; - BSS_STACK(4096); void platform_init(unsigned long r3, unsigned long r4, unsigned long r5) diff --git a/arch/powerpc/boot/io.h b/arch/powerpc/boot/io.h index 32974ed..ccaedae 100644 --- a/arch/powerpc/boot/io.h +++ b/arch/powerpc/boot/io.h @@ -1,5 +1,8 @@ #ifndef _IO_H #define __IO_H + +#include "types.h" + /* * Low-level I/O routines. * @@ -20,6 +23,37 @@ static inline void out_8(volatile unsigned char *addr, int val) : "=m" (*addr) : "r" (val)); } +static inline unsigned in_le16(const volatile u16 *addr) +{ + unsigned ret; + + __asm__ __volatile__("lhbrx %0,0,%1; twi 0,%0,0; isync" + : "=r" (ret) : "r" (addr), "m" (*addr)); + + return ret; +} + +static inline unsigned in_be16(const volatile u16 *addr) +{ + unsigned ret; + + __asm__ __volatile__("lhz%U1%X1 %0,%1; twi 0,%0,0; isync" + : "=r" (ret) : "m" (*addr)); + return ret; +} + +static inline void out_le16(volatile u16 *addr, int val) +{ + __asm__ __volatile__("sthbrx %1,0,%2; sync" : "=m" (*addr) + : "r" (val), "r" (addr)); +} + +static inline void out_be16(volatile u16 *addr, int val) +{ + __asm__ __volatile__("sth%U0%X0 %1,%0; sync" + : "=m" (*addr) : "r" (val)); +} + static inline unsigned in_le32(const volatile unsigned *addr) { unsigned ret; @@ -50,4 +84,19 @@ static inline void out_be32(volatile unsigned *addr, int val) : "=m" (*addr) : "r" (val)); } +static inline void sync(void) +{ + asm volatile("sync" : : : "memory"); +} + +static inline void eieio(void) +{ + asm volatile("eieio" : : : "memory"); +} + +static inline void barrier(void) +{ + asm volatile("" : : : "memory"); +} + #endif /* _IO_H */ diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c index 416dc38..1b496b3 100644 --- a/arch/powerpc/boot/main.c +++ b/arch/powerpc/boot/main.c @@ -19,16 +19,6 @@ #include "flatdevtree.h" #include "reg.h" -extern char _start[]; -extern char __bss_start[]; -extern char _end[]; -extern char _vmlinux_start[]; -extern char _vmlinux_end[]; -extern char _initrd_start[]; -extern char _initrd_end[]; -extern char _dtb_start[]; -extern char _dtb_end[]; - static struct gunzip_state gzstate; struct addr_range { diff --git a/arch/powerpc/boot/mpc52xx-psc.c b/arch/powerpc/boot/mpc52xx-psc.c new file mode 100644 index 0000000..1074626 --- /dev/null +++ b/arch/powerpc/boot/mpc52xx-psc.c @@ -0,0 +1,69 @@ +/* + * MPC5200 PSC serial console support. + * + * Author: Grant Likely <grant.likely@secretlab.ca> + * + * Copyright (c) 2007 Secret Lab Technologies Ltd. + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * It is assumed that the firmware (or the platform file) has already set + * up the port. + */ + +#include "types.h" +#include "io.h" +#include "ops.h" + +/* Programmable Serial Controller (PSC) status register bits */ +#define MPC52xx_PSC_SR 0x04 +#define MPC52xx_PSC_SR_RXRDY 0x0100 +#define MPC52xx_PSC_SR_RXFULL 0x0200 +#define MPC52xx_PSC_SR_TXRDY 0x0400 +#define MPC52xx_PSC_SR_TXEMP 0x0800 + +#define MPC52xx_PSC_BUFFER 0x0C + +static void *psc; + +static int psc_open(void) +{ + /* Assume the firmware has already configured the PSC into + * uart mode */ + return 0; +} + +static void psc_putc(unsigned char c) +{ + while (!(in_be16(psc + MPC52xx_PSC_SR) & MPC52xx_PSC_SR_TXRDY)) ; + out_8(psc + MPC52xx_PSC_BUFFER, c); +} + +static unsigned char psc_tstc(void) +{ + return (in_be16(psc + MPC52xx_PSC_SR) & MPC52xx_PSC_SR_RXRDY) != 0; +} + +static unsigned char psc_getc(void) +{ + while (!(in_be16(psc + MPC52xx_PSC_SR) & MPC52xx_PSC_SR_RXRDY)) ; + return in_8(psc + MPC52xx_PSC_BUFFER); +} + +int mpc5200_psc_console_init(void *devp, struct serial_console_data *scdp) +{ + int n; + + /* Get the base address of the psc registers */ + n = getprop(devp, "virtual-reg", &psc, sizeof(psc)); + if (n != sizeof(psc)) { + if (!dt_xlate_reg(devp, 0, (void *)&psc, NULL)) + return -1; + } + + scdp->open = psc_open; + scdp->putc = psc_putc; + scdp->getc = psc_getc; + scdp->tstc = psc_tstc; + + return 0; +} diff --git a/arch/powerpc/boot/mpc8xx.c b/arch/powerpc/boot/mpc8xx.c new file mode 100644 index 0000000..add55a7 --- /dev/null +++ b/arch/powerpc/boot/mpc8xx.c @@ -0,0 +1,82 @@ +/* + * MPC8xx support functions + * + * Author: Scott Wood <scottwood@freescale.com> + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "types.h" +#include "fsl-soc.h" +#include "mpc8xx.h" +#include "stdio.h" +#include "io.h" + +#define MPC8XX_PLPRCR (0x284/4) /* PLL and Reset Control Register */ + +/* Return system clock from crystal frequency */ +u32 mpc885_get_clock(u32 crystal) +{ + u32 *immr; + u32 plprcr; + int mfi, mfn, mfd, pdf, div; + u32 ret; + + immr = fsl_get_immr(); + if (!immr) { + printf("mpc885_get_clock: Couldn't get IMMR base.\r\n"); + return 0; + } + + plprcr = in_be32(&immr[MPC8XX_PLPRCR]); + + mfi = (plprcr >> 16) & 15; + if (mfi < 5) { + printf("Warning: PLPRCR[MFI] value of %d out-of-bounds\r\n", + mfi); + mfi = 5; + } + + pdf = (plprcr >> 1) & 0xf; + div = (plprcr >> 20) & 3; + mfd = (plprcr >> 22) & 0x1f; + mfn = (plprcr >> 27) & 0x1f; + + ret = crystal * mfi; + + if (mfn != 0) + ret += crystal * mfn / (mfd + 1); + + return ret / (pdf + 1); +} + +/* Set common device tree fields based on the given clock frequencies. */ +void mpc8xx_set_clocks(u32 sysclk) +{ + void *node; + + dt_fixup_cpu_clocks(sysclk, sysclk / 16, sysclk); + + node = finddevice("/soc/cpm"); + if (node) + setprop(node, "clock-frequency", &sysclk, 4); + + node = finddevice("/soc/cpm/brg"); + if (node) + setprop(node, "clock-frequency", &sysclk, 4); +} + +int mpc885_fixup_clocks(u32 crystal) +{ + u32 sysclk = mpc885_get_clock(crystal); + if (!sysclk) + return 0; + + mpc8xx_set_clocks(sysclk); + return 1; +} diff --git a/arch/powerpc/boot/mpc8xx.h b/arch/powerpc/boot/mpc8xx.h new file mode 100644 index 0000000..3f59901 --- /dev/null +++ b/arch/powerpc/boot/mpc8xx.h @@ -0,0 +1,11 @@ +#ifndef _PPC_BOOT_MPC8xx_H_ +#define _PPC_BOOT_MPC8xx_H_ + +#include "types.h" + +void mpc8xx_set_clocks(u32 sysclk); + +u32 mpc885_get_clock(u32 crystal); +int mpc885_fixup_clocks(u32 crystal); + +#endif diff --git a/arch/powerpc/boot/mpsc.c b/arch/powerpc/boot/mpsc.c index f1c0e96..802ea53 100644 --- a/arch/powerpc/boot/mpsc.c +++ b/arch/powerpc/boot/mpsc.c @@ -17,7 +17,6 @@ #include "io.h" #include "ops.h" -extern void udelay(long delay); #define MPSC_CHR_1 0x000c diff --git a/arch/powerpc/boot/mv64x60_i2c.c b/arch/powerpc/boot/mv64x60_i2c.c index 435fe85..d085377 100644 --- a/arch/powerpc/boot/mv64x60_i2c.c +++ b/arch/powerpc/boot/mv64x60_i2c.c @@ -21,8 +21,6 @@ #include "ops.h" #include "mv64x60.h" -extern void udelay(long); - /* Register defines */ #define MV64x60_I2C_REG_SLAVE_ADDR 0x00 #define MV64x60_I2C_REG_DATA 0x04 diff --git a/arch/powerpc/boot/of.c b/arch/powerpc/boot/of.c index 385e08b..61d9899 100644 --- a/arch/powerpc/boot/of.c +++ b/arch/powerpc/boot/of.c @@ -17,8 +17,6 @@ #include "of.h" -extern char _end[]; - /* Value picked to match that used by yaboot */ #define PROG_START 0x01400000 /* only used on 64-bit systems */ #define RAM_END (512<<20) /* Fixme: use OF */ diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h index 8607706..a180b65 100644 --- a/arch/powerpc/boot/ops.h +++ b/arch/powerpc/boot/ops.h @@ -47,6 +47,7 @@ struct dt_ops { const char *propname, const char *propval, int proplen); unsigned long (*finalize)(void); + char *(*get_path)(const void *phandle, char *buf, int len); }; extern struct dt_ops dt_ops; @@ -82,11 +83,16 @@ int ft_init(void *dt_blob, unsigned int max_size, unsigned int max_find_device); int serial_console_init(void); int ns16550_console_init(void *devp, struct serial_console_data *scdp); int mpsc_console_init(void *devp, struct serial_console_data *scdp); +int cpm_console_init(void *devp, struct serial_console_data *scdp); +int mpc5200_psc_console_init(void *devp, struct serial_console_data *scdp); +int uartlite_console_init(void *devp, struct serial_console_data *scdp); void *simple_alloc_init(char *base, unsigned long heap_size, unsigned long granularity, unsigned long max_allocs); extern void flush_cache(void *, unsigned long); int dt_xlate_reg(void *node, int res, unsigned long *addr, unsigned long *size); int dt_xlate_addr(void *node, u32 *buf, int buflen, unsigned long *xlated_addr); +int dt_is_compatible(void *node, const char *compat); +void dt_get_reg_format(void *node, u32 *naddr, u32 *nsize); static inline void *finddevice(const char *name) { @@ -156,6 +162,7 @@ static inline void *find_node_by_devtype(const void *prev, void dt_fixup_memory(u64 start, u64 size); void dt_fixup_cpu_clocks(u32 cpufreq, u32 tbfreq, u32 busfreq); void dt_fixup_clock(const char *path, u32 freq); +void dt_fixup_mac_address(u32 index, const u8 *addr); void __dt_fixup_mac_addresses(u32 startindex, ...); #define dt_fixup_mac_addresses(...) \ __dt_fixup_mac_addresses(0, __VA_ARGS__, NULL) @@ -167,6 +174,14 @@ static inline void *find_node_by_linuxphandle(const u32 linuxphandle) (char *)&linuxphandle, sizeof(u32)); } +static inline char *get_path(const void *phandle, char *buf, int len) +{ + if (dt_ops.get_path) + return dt_ops.get_path(phandle, buf, len); + + return NULL; +} + static inline void *malloc(unsigned long size) { return (platform_ops.malloc) ? platform_ops.malloc(size) : NULL; @@ -191,4 +206,25 @@ static inline void exit(void) static char _bss_stack[size]; \ void *_platform_stack_top = _bss_stack + sizeof(_bss_stack); +extern unsigned long timebase_period_ns; +void udelay(long delay); + +extern char _start[]; +extern char __bss_start[]; +extern char _end[]; +extern char _vmlinux_start[]; +extern char _vmlinux_end[]; +extern char _initrd_start[]; +extern char _initrd_end[]; +extern char _dtb_start[]; +extern char _dtb_end[]; + +static inline __attribute__((const)) +int __ilog2_u32(u32 n) +{ + int bit; + asm ("cntlzw %0,%1" : "=r" (bit) : "r" (n)); + return 31 - bit; +} + #endif /* _PPC_BOOT_OPS_H_ */ diff --git a/arch/powerpc/boot/planetcore.c b/arch/powerpc/boot/planetcore.c new file mode 100644 index 0000000..0d8558a --- /dev/null +++ b/arch/powerpc/boot/planetcore.c @@ -0,0 +1,166 @@ +/* + * PlanetCore configuration data support functions + * + * Author: Scott Wood <scottwood@freescale.com> + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "stdio.h" +#include "stdlib.h" +#include "ops.h" +#include "planetcore.h" +#include "io.h" + +/* PlanetCore passes information to the OS in the form of + * a table of key=value strings, separated by newlines. + * + * The list is terminated by an empty string (i.e. two + * consecutive newlines). + * + * To make it easier to parse, we first convert all the + * newlines into null bytes. + */ + +void planetcore_prepare_table(char *table) +{ + do { + if (*table == '\n') + *table = 0; + + table++; + } while (*(table - 1) || *table != '\n'); + + *table = 0; +} + +const char *planetcore_get_key(const char *table, const char *key) +{ + int keylen = strlen(key); + + do { + if (!strncmp(table, key, keylen) && table[keylen] == '=') + return table + keylen + 1; + + table += strlen(table) + 1; + } while (strlen(table) != 0); + + return NULL; +} + +int planetcore_get_decimal(const char *table, const char *key, u64 *val) +{ + const char *str = planetcore_get_key(table, key); + if (!str) + return 0; + + *val = strtoull(str, NULL, 10); + return 1; +} + +int planetcore_get_hex(const char *table, const char *key, u64 *val) +{ + const char *str = planetcore_get_key(table, key); + if (!str) + return 0; + + *val = strtoull(str, NULL, 16); + return 1; +} + +static u64 mac_table[4] = { + 0x000000000000, + 0x000000800000, + 0x000000400000, + 0x000000c00000, +}; + +void planetcore_set_mac_addrs(const char *table) +{ + u8 addr[4][6]; + u64 int_addr; + u32 i; + int j; + + if (!planetcore_get_hex(table, PLANETCORE_KEY_MAC_ADDR, &int_addr)) + return; + + for (i = 0; i < 4; i++) { + u64 this_dev_addr = (int_addr & ~0x000000c00000) | + mac_table[i]; + + for (j = 5; j >= 0; j--) { + addr[i][j] = this_dev_addr & 0xff; + this_dev_addr >>= 8; + } + + dt_fixup_mac_address(i, addr[i]); + } +} + +static char prop_buf[MAX_PROP_LEN]; + +void planetcore_set_stdout_path(const char *table) +{ + char *path; + const char *label; + void *node, *chosen; + + label = planetcore_get_key(table, PLANETCORE_KEY_SERIAL_PORT); + if (!label) + return; + + node = find_node_by_prop_value_str(NULL, "linux,planetcore-label", + label); + if (!node) + return; + + path = get_path(node, prop_buf, MAX_PROP_LEN); + if (!path) + return; + + chosen = finddevice("/chosen"); + if (!chosen) + chosen = create_node(NULL, "chosen"); + if (!chosen) + return; + + setprop_str(chosen, "linux,stdout-path", path); +} + +void planetcore_set_serial_speed(const char *table) +{ + void *chosen, *stdout; + u64 baud; + u32 baud32; + int len; + + chosen = finddevice("/chosen"); + if (!chosen) + return; + + len = getprop(chosen, "linux,stdout-path", prop_buf, MAX_PROP_LEN); + if (len <= 0) + return; + + stdout = finddevice(prop_buf); + if (!stdout) { + printf("planetcore_set_serial_speed: " + "Bad /chosen/linux,stdout-path.\r\n"); + + return; + } + + if (!planetcore_get_decimal(table, PLANETCORE_KEY_SERIAL_BAUD, + &baud)) { + printf("planetcore_set_serial_speed: No SB tag.\r\n"); + return; + } + + baud32 = baud; + setprop(stdout, "current-speed", &baud32, 4); +} diff --git a/arch/powerpc/boot/planetcore.h b/arch/powerpc/boot/planetcore.h new file mode 100644 index 0000000..0d4094f --- /dev/null +++ b/arch/powerpc/boot/planetcore.h @@ -0,0 +1,49 @@ +#ifndef _PPC_BOOT_PLANETCORE_H_ +#define _PPC_BOOT_PLANETCORE_H_ + +#include "types.h" + +#define PLANETCORE_KEY_BOARD_TYPE "BO" +#define PLANETCORE_KEY_BOARD_REV "BR" +#define PLANETCORE_KEY_MB_RAM "D1" +#define PLANETCORE_KEY_MAC_ADDR "EA" +#define PLANETCORE_KEY_FLASH_SPEED "FS" +#define PLANETCORE_KEY_IP_ADDR "IP" +#define PLANETCORE_KEY_KB_NVRAM "NV" +#define PLANETCORE_KEY_PROCESSOR "PR" +#define PLANETCORE_KEY_PROC_VARIANT "PV" +#define PLANETCORE_KEY_SERIAL_BAUD "SB" +#define PLANETCORE_KEY_SERIAL_PORT "SP" +#define PLANETCORE_KEY_SWITCH "SW" +#define PLANETCORE_KEY_TEMP_OFFSET "TC" +#define PLANETCORE_KEY_TARGET_IP "TIP" +#define PLANETCORE_KEY_CRYSTAL_HZ "XT" + +/* Prepare the table for processing, by turning all newlines + * into NULL bytes. + */ +void planetcore_prepare_table(char *table); + +/* Return the value associated with a given key in text, + * decimal, or hex format. + * + * Returns zero/NULL on failure, non-zero on success. + */ +const char *planetcore_get_key(const char *table, const char *key); +int planetcore_get_decimal(const char *table, const char *key, u64 *val); +int planetcore_get_hex(const char *table, const char *key, u64 *val); + +/* Updates the device tree local-mac-address properties based + * on the EA tag. + */ +void planetcore_set_mac_addrs(const char *table); + +/* Sets the linux,stdout-path in the /chosen node. This requires the + * linux,planetcore-label property in each serial node. + */ +void planetcore_set_stdout_path(const char *table); + +/* Sets the current-speed property in the serial node. */ +void planetcore_set_serial_speed(const char *table); + +#endif diff --git a/arch/powerpc/boot/ppcboot.h b/arch/powerpc/boot/ppcboot.h index 5290ff2..6ae6f90 100644 --- a/arch/powerpc/boot/ppcboot.h +++ b/arch/powerpc/boot/ppcboot.h @@ -78,17 +78,18 @@ typedef struct bd_info { hymod_conf_t bi_hymod_conf; /* hymod configuration information */ #endif #if defined(TARGET_EVB64260) || defined(TARGET_405EP) || defined(TARGET_44x) || \ - defined(TARGET_85xx) || defined(TARGET_83xx) + defined(TARGET_85xx) || defined(TARGET_83xx) || defined(TARGET_HAS_ETH1) /* second onboard ethernet port */ unsigned char bi_enet1addr[6]; #define HAVE_ENET1ADDR #endif -#if defined(TARGET_EVB64260) || defined(TARGET_440GX) || defined(TARGET_85xx) +#if defined(TARGET_EVB64260) || defined(TARGET_440GX) || \ + defined(TARGET_85xx) || defined(TARGET_HAS_ETH2) /* third onboard ethernet ports */ unsigned char bi_enet2addr[6]; #define HAVE_ENET2ADDR #endif -#if defined(TARGET_440GX) +#if defined(TARGET_440GX) || defined(TARGET_HAS_ETH3) /* fourth onboard ethernet ports */ unsigned char bi_enet3addr[6]; #define HAVE_ENET3ADDR diff --git a/arch/powerpc/boot/pq2.c b/arch/powerpc/boot/pq2.c new file mode 100644 index 0000000..f6d1185 --- /dev/null +++ b/arch/powerpc/boot/pq2.c @@ -0,0 +1,102 @@ +/* + * PowerQUICC II support functions + * + * Author: Scott Wood <scottwood@freescale.com> + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "types.h" +#include "fsl-soc.h" +#include "pq2.h" +#include "stdio.h" +#include "io.h" + +#define PQ2_SCCR (0x10c80/4) /* System Clock Configuration Register */ +#define PQ2_SCMR (0x10c88/4) /* System Clock Mode Register */ + +static int pq2_corecnf_map[] = { + 3, 2, 2, 2, 4, 4, 5, 9, 6, 11, 8, 10, 3, 12, 7, -1, + 6, 5, 13, 2, 14, 4, 15, 9, 0, 11, 8, 10, 16, 12, 7, -1 +}; + +/* Get various clocks from crystal frequency. + * Returns zero on failure and non-zero on success. + */ +int pq2_get_clocks(u32 crystal, u32 *sysfreq, u32 *corefreq, + u32 *timebase, u32 *brgfreq) +{ + u32 *immr; + u32 sccr, scmr, mainclk, busclk; + int corecnf, busdf, plldf, pllmf, dfbrg; + + immr = fsl_get_immr(); + if (!immr) { + printf("pq2_get_clocks: Couldn't get IMMR base.\r\n"); + return 0; + } + + sccr = in_be32(&immr[PQ2_SCCR]); + scmr = in_be32(&immr[PQ2_SCMR]); + + dfbrg = sccr & 3; + corecnf = (scmr >> 24) & 0x1f; + busdf = (scmr >> 20) & 0xf; + plldf = (scmr >> 12) & 1; + pllmf = scmr & 0xfff; + + mainclk = crystal * (pllmf + 1) / (plldf + 1); + busclk = mainclk / (busdf + 1); + + if (sysfreq) + *sysfreq = mainclk / 2; + if (timebase) + *timebase = busclk / 4; + if (brgfreq) + *brgfreq = mainclk / (1 << ((dfbrg + 1) * 2)); + + if (corefreq) { + int coremult = pq2_corecnf_map[corecnf]; + + if (coremult < 0) + *corefreq = mainclk / 2; + else if (coremult == 0) + return 0; + else + *corefreq = busclk * coremult / 2; + } + + return 1; +} + +/* Set common device tree fields based on the given clock frequencies. */ +void pq2_set_clocks(u32 sysfreq, u32 corefreq, u32 timebase, u32 brgfreq) +{ + void *node; + + dt_fixup_cpu_clocks(corefreq, timebase, sysfreq); + + node = finddevice("/soc/cpm"); + if (node) + setprop(node, "clock-frequency", &sysfreq, 4); + + node = finddevice("/soc/cpm/brg"); + if (node) + setprop(node, "clock-frequency", &brgfreq, 4); +} + +int pq2_fixup_clocks(u32 crystal) +{ + u32 sysfreq, corefreq, timebase, brgfreq; + + if (!pq2_get_clocks(crystal, &sysfreq, &corefreq, &timebase, &brgfreq)) + return 0; + + pq2_set_clocks(sysfreq, corefreq, timebase, brgfreq); + return 1; +} diff --git a/arch/powerpc/boot/pq2.h b/arch/powerpc/boot/pq2.h new file mode 100644 index 0000000..481698c --- /dev/null +++ b/arch/powerpc/boot/pq2.h @@ -0,0 +1,11 @@ +#ifndef _PPC_BOOT_PQ2_H_ +#define _PPC_BOOT_PQ2_H_ + +#include "types.h" + +int pq2_get_clocks(u32 crystal, u32 *sysfreq, u32 *corefreq, + u32 *timebase, u32 *brgfreq); +void pq2_set_clocks(u32 sysfreq, u32 corefreq, u32 timebase, u32 brgfreq); +int pq2_fixup_clocks(u32 crystal); + +#endif diff --git a/arch/powerpc/boot/prpmc2800.c b/arch/powerpc/boot/prpmc2800.c index f428bac..9614e1d 100644 --- a/arch/powerpc/boot/prpmc2800.c +++ b/arch/powerpc/boot/prpmc2800.c @@ -21,12 +21,6 @@ #include "gunzip_util.h" #include "mv64x60.h" -extern char _end[]; -extern char _vmlinux_start[], _vmlinux_end[]; -extern char _dtb_start[], _dtb_end[]; - -extern void udelay(long delay); - #define KB 1024U #define MB (KB*KB) #define GB (KB*MB) diff --git a/arch/powerpc/boot/ps3.c b/arch/powerpc/boot/ps3.c index 893d593..d666115 100644 --- a/arch/powerpc/boot/ps3.c +++ b/arch/powerpc/boot/ps3.c @@ -120,10 +120,6 @@ void ps3_copy_vectors(void) void platform_init(void) { - extern char _end[]; - extern char _dtb_start[]; - extern char _initrd_start[]; - extern char _initrd_end[]; const u32 heapsize = 0x1000000 - (u32)_end; /* 16MiB */ void *chosen; unsigned long ft_addr; diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c index eaa0d3a..cafeece 100644 --- a/arch/powerpc/boot/serial.c +++ b/arch/powerpc/boot/serial.c @@ -19,8 +19,6 @@ #include "io.h" #include "ops.h" -extern void udelay(long delay); - static int serial_open(void) { struct serial_console_data *scdp = console_ops.data; @@ -114,29 +112,36 @@ int serial_console_init(void) { void *devp; int rc = -1; - char compat[MAX_PROP_LEN]; devp = serial_get_stdout_devp(); if (devp == NULL) goto err_out; - if (getprop(devp, "compatible", compat, sizeof(compat)) < 0) - goto err_out; - - if (!strcmp(compat, "ns16550")) + if (dt_is_compatible(devp, "ns16550")) rc = ns16550_console_init(devp, &serial_cd); - else if (!strcmp(compat, "marvell,mpsc")) + else if (dt_is_compatible(devp, "marvell,mpsc")) rc = mpsc_console_init(devp, &serial_cd); + else if (dt_is_compatible(devp, "fsl,cpm1-scc-uart") || + dt_is_compatible(devp, "fsl,cpm1-smc-uart") || + dt_is_compatible(devp, "fsl,cpm2-scc-uart") || + dt_is_compatible(devp, "fsl,cpm2-smc-uart")) + rc = cpm_console_init(devp, &serial_cd); + else if (dt_is_compatible(devp, "mpc5200-psc-uart")) + rc = mpc5200_psc_console_init(devp, &serial_cd); + else if (dt_is_compatible(devp, "xilinx,uartlite")) + rc = uartlite_console_init(devp, &serial_cd); /* Add other serial console driver calls here */ if (!rc) { console_ops.open = serial_open; console_ops.write = serial_write; - console_ops.edit_cmdline = serial_edit_cmdline; console_ops.close = serial_close; console_ops.data = &serial_cd; + if (serial_cd.getc) + console_ops.edit_cmdline = serial_edit_cmdline; + return 0; } err_out: diff --git a/arch/powerpc/boot/stdlib.c b/arch/powerpc/boot/stdlib.c new file mode 100644 index 0000000..e00d58c --- /dev/null +++ b/arch/powerpc/boot/stdlib.c @@ -0,0 +1,45 @@ +/* + * stdlib functions + * + * Author: Scott Wood <scottwood@freescale.com> + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "stdlib.h" + +/* Not currently supported: leading whitespace, sign, 0x prefix, zero base */ +unsigned long long int strtoull(const char *ptr, char **end, int base) +{ + unsigned long long ret = 0; + + if (base > 36) + goto out; + + while (*ptr) { + int digit; + + if (*ptr >= '0' && *ptr <= '9' && *ptr < '0' + base) + digit = *ptr - '0'; + else if (*ptr >= 'A' && *ptr < 'A' + base - 10) + digit = *ptr - 'A' + 10; + else if (*ptr >= 'a' && *ptr < 'a' + base - 10) + digit = *ptr - 'a' + 10; + else + break; + + ret *= base; + ret += digit; + ptr++; + } + +out: + if (end) + *end = (char *)ptr; + + return ret; +} diff --git a/arch/powerpc/boot/stdlib.h b/arch/powerpc/boot/stdlib.h new file mode 100644 index 0000000..1bf01ac --- /dev/null +++ b/arch/powerpc/boot/stdlib.h @@ -0,0 +1,6 @@ +#ifndef _PPC_BOOT_STDLIB_H_ +#define _PPC_BOOT_STDLIB_H_ + +unsigned long long int strtoull(const char *ptr, char **end, int base); + +#endif diff --git a/arch/powerpc/boot/string.S b/arch/powerpc/boot/string.S index ac3d43b..643e4cb 100644 --- a/arch/powerpc/boot/string.S +++ b/arch/powerpc/boot/string.S @@ -49,6 +49,17 @@ strcat: bne 1b blr + .globl strchr +strchr: + addi r3,r3,-1 +1: lbzu r0,1(r3) + cmpw 0,r0,r4 + beqlr + cmpwi 0,r0,0 + bne 1b + li r3,0 + blr + .globl strcmp strcmp: addi r5,r3,-1 @@ -61,6 +72,19 @@ strcmp: beq 1b blr + .globl strncmp +strncmp: + mtctr r5 + addi r5,r3,-1 + addi r4,r4,-1 +1: lbzu r3,1(r5) + cmpwi 1,r3,0 + lbzu r0,1(r4) + subf. r3,r0,r3 + beqlr 1 + bdnzt eq,1b + blr + .globl strlen strlen: addi r4,r3,-1 @@ -195,6 +219,19 @@ backwards_memcpy: mtctr r7 b 1b + .globl memchr +memchr: + cmpwi 0,r5,0 + blelr + mtctr r5 + addi r3,r3,-1 +1: lbzu r0,1(r3) + cmpw r0,r4 + beqlr + bdnz 1b + li r3,0 + blr + .globl memcmp memcmp: cmpwi 0,r5,0 diff --git a/arch/powerpc/boot/string.h b/arch/powerpc/boot/string.h index 9fdff1c..50091cc 100644 --- a/arch/powerpc/boot/string.h +++ b/arch/powerpc/boot/string.h @@ -5,13 +5,16 @@ extern char *strcpy(char *dest, const char *src); extern char *strncpy(char *dest, const char *src, size_t n); extern char *strcat(char *dest, const char *src); +extern char *strchr(const char *s, int c); extern int strcmp(const char *s1, const char *s2); +extern int strncmp(const char *s1, const char *s2, size_t n); extern size_t strlen(const char *s); extern size_t strnlen(const char *s, size_t count); extern void *memset(void *s, int c, size_t n); extern void *memmove(void *dest, const void *src, unsigned long n); extern void *memcpy(void *dest, const void *src, unsigned long n); +extern void *memchr(const void *s, int c, size_t n); extern int memcmp(const void *s1, const void *s2, size_t n); #endif /* _PPC_BOOT_STRING_H_ */ diff --git a/arch/powerpc/boot/treeboot-bamboo.c b/arch/powerpc/boot/treeboot-bamboo.c new file mode 100644 index 0000000..9eee48f --- /dev/null +++ b/arch/powerpc/boot/treeboot-bamboo.c @@ -0,0 +1,43 @@ +/* + * Copyright IBM Corporation, 2007 + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * Based on ebony wrapper: + * Copyright 2007 David Gibson, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 of the License + */ +#include "ops.h" +#include "stdio.h" +#include "44x.h" +#include "stdlib.h" + +BSS_STACK(4096); + +#define PIBS_MAC0 0xfffc0400 +#define PIBS_MAC1 0xfffc0500 +char pibs_mac0[6]; +char pibs_mac1[6]; + +static void read_pibs_mac(void) +{ + unsigned long long mac64; + + mac64 = strtoull((char *)PIBS_MAC0, 0, 16); + memcpy(&pibs_mac0, (char *)&mac64+2, 6); + + mac64 = strtoull((char *)PIBS_MAC1, 0, 16); + memcpy(&pibs_mac1, (char *)&mac64+2, 6); +} + +void platform_init(void) +{ + unsigned long end_of_ram = 0x8000000; + unsigned long avail_ram = end_of_ram - (unsigned long)_end; + + simple_alloc_init(_end, avail_ram, 32, 64); + read_pibs_mac(); + bamboo_init((u8 *)&pibs_mac0, (u8 *)&pibs_mac1); +} diff --git a/arch/powerpc/boot/treeboot-ebony.c b/arch/powerpc/boot/treeboot-ebony.c index 8436a9c..21cc483 100644 --- a/arch/powerpc/boot/treeboot-ebony.c +++ b/arch/powerpc/boot/treeboot-ebony.c @@ -16,8 +16,6 @@ #include "stdio.h" #include "44x.h" -extern char _end[]; - BSS_STACK(4096); #define OPENBIOS_MAC_BASE 0xfffffe0c diff --git a/arch/powerpc/boot/treeboot-walnut.c b/arch/powerpc/boot/treeboot-walnut.c new file mode 100644 index 0000000..3adf2d0 --- /dev/null +++ b/arch/powerpc/boot/treeboot-walnut.c @@ -0,0 +1,131 @@ +/* + * Old U-boot compatibility for Walnut + * + * Author: Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * Copyright 2007 IBM Corporation + * Based on cuboot-83xx.c, which is: + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "dcr.h" +#include "4xx.h" +#include "io.h" + +BSS_STACK(4096); + +void ibm405gp_fixup_clocks(unsigned int sysclk, unsigned int ser_clk) +{ + u32 pllmr = mfdcr(DCRN_CPC0_PLLMR); + u32 cpc0_cr0 = mfdcr(DCRN_405_CPC0_CR0); + u32 cpc0_cr1 = mfdcr(DCRN_405_CPC0_CR1); + u32 cpu, plb, opb, ebc, tb, uart0, uart1, m; + u32 fwdv, fbdv, cbdv, opdv, epdv, udiv; + + fwdv = (8 - ((pllmr & 0xe0000000) >> 29)); + fbdv = (pllmr & 0x1e000000) >> 25; + cbdv = ((pllmr & 0x00060000) >> 17) + 1; + opdv = ((pllmr & 0x00018000) >> 15) + 1; + epdv = ((pllmr & 0x00001800) >> 13) + 2; + udiv = ((cpc0_cr0 & 0x3e) >> 1) + 1; + + m = fwdv * fbdv * cbdv; + + cpu = sysclk * m / fwdv; + plb = cpu / cbdv; + opb = plb / opdv; + ebc = plb / epdv; + + if (cpc0_cr0 & 0x80) { + /* uart0 uses the external clock */ + uart0 = ser_clk; + } else { + uart0 = cpu / udiv; + } + + if (cpc0_cr0 & 0x40) { + /* uart1 uses the external clock */ + uart1 = ser_clk; + } else { + uart1 = cpu / udiv; + } + + /* setup the timebase clock to tick at the cpu frequency */ + cpc0_cr1 = cpc0_cr1 & ~ 0x00800000; + mtdcr(DCRN_CPC0_CR1, cpc0_cr1); + tb = cpu; + + dt_fixup_cpu_clocks(cpu, tb, 0); + dt_fixup_clock("/plb", plb); + dt_fixup_clock("/plb/opb", opb); + dt_fixup_clock("/plb/ebc", ebc); + dt_fixup_clock("/plb/opb/serial@ef600300", uart0); + dt_fixup_clock("/plb/opb/serial@ef600400", uart1); +} + +static void walnut_flashsel_fixup(void) +{ + void *devp, *sram; + u32 reg_flash[3] = {0x0, 0x0, 0x80000}; + u32 reg_sram[3] = {0x0, 0x0, 0x80000}; + u8 *fpga; + u8 fpga_brds1 = 0x0; + + devp = finddevice("/plb/ebc/fpga"); + if (!devp) + fatal("Couldn't locate FPGA node\n\r"); + + if (getprop(devp, "virtual-reg", &fpga, sizeof(fpga)) != sizeof(fpga)) + fatal("no virtual-reg property\n\r"); + + fpga_brds1 = in_8(fpga); + + devp = finddevice("/plb/ebc/flash"); + if (!devp) + fatal("Couldn't locate flash node\n\r"); + + if (getprop(devp, "reg", reg_flash, sizeof(reg_flash)) != sizeof(reg_flash)) + fatal("flash reg property has unexpected size\n\r"); + + sram = finddevice("/plb/ebc/sram"); + if (!sram) + fatal("Couldn't locate sram node\n\r"); + + if (getprop(sram, "reg", reg_sram, sizeof(reg_sram)) != sizeof(reg_sram)) + fatal("sram reg property has unexpected size\n\r"); + + if (fpga_brds1 & 0x1) { + reg_flash[1] ^= 0x80000; + reg_sram[1] ^= 0x80000; + } + + setprop(devp, "reg", reg_flash, sizeof(reg_flash)); + setprop(sram, "reg", reg_sram, sizeof(reg_sram)); +} + +static void walnut_fixups(void) +{ + ibm4xx_fixup_memsize(); + ibm405gp_fixup_clocks(33330000, 0xa8c000); + ibm4xx_quiesce_eth((u32 *)0xef600800, NULL); + ibm4xx_fixup_ebc_ranges("/plb/ebc"); + walnut_flashsel_fixup(); +} + +void platform_init(void) +{ + unsigned long end_of_ram = 0x2000000; + unsigned long avail_ram = end_of_ram - (unsigned long) _end; + + simple_alloc_init(_end, avail_ram, 32, 32); + platform_ops.fixups = walnut_fixups; + platform_ops.exit = ibm40x_dbcr_reset; + ft_init(_dtb_start, _dtb_end - _dtb_start, 32); + serial_console_init(); +} diff --git a/arch/powerpc/boot/uartlite.c b/arch/powerpc/boot/uartlite.c new file mode 100644 index 0000000..46bed69 --- /dev/null +++ b/arch/powerpc/boot/uartlite.c @@ -0,0 +1,79 @@ +/* + * Xilinx UARTLITE bootloader driver + * + * Copyright (C) 2007 Secret Lab Technologies Ltd. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <stdarg.h> +#include <stddef.h> +#include "types.h" +#include "string.h" +#include "stdio.h" +#include "io.h" +#include "ops.h" + +#define ULITE_RX 0x00 +#define ULITE_TX 0x04 +#define ULITE_STATUS 0x08 +#define ULITE_CONTROL 0x0c + +#define ULITE_STATUS_RXVALID 0x01 +#define ULITE_STATUS_TXFULL 0x08 + +#define ULITE_CONTROL_RST_RX 0x02 + +static void * reg_base; + +static int uartlite_open(void) +{ + /* Clear the RX FIFO */ + out_be32(reg_base + ULITE_CONTROL, ULITE_CONTROL_RST_RX); + return 0; +} + +static void uartlite_putc(unsigned char c) +{ + u32 reg = ULITE_STATUS_TXFULL; + while (reg & ULITE_STATUS_TXFULL) /* spin on TXFULL bit */ + reg = in_be32(reg_base + ULITE_STATUS); + out_be32(reg_base + ULITE_TX, c); +} + +static unsigned char uartlite_getc(void) +{ + u32 reg = 0; + while (!(reg & ULITE_STATUS_RXVALID)) /* spin waiting for RXVALID bit */ + reg = in_be32(reg_base + ULITE_STATUS); + return in_be32(reg_base + ULITE_RX); +} + +static u8 uartlite_tstc(void) +{ + u32 reg = in_be32(reg_base + ULITE_STATUS); + return reg & ULITE_STATUS_RXVALID; +} + +int uartlite_console_init(void *devp, struct serial_console_data *scdp) +{ + int n; + unsigned long reg_phys; + + n = getprop(devp, "virtual-reg", ®_base, sizeof(reg_base)); + if (n != sizeof(reg_base)) { + if (!dt_xlate_reg(devp, 0, ®_phys, NULL)) + return -1; + + reg_base = (void *)reg_phys; + } + + scdp->open = uartlite_open; + scdp->putc = uartlite_putc; + scdp->getc = uartlite_getc; + scdp->tstc = uartlite_tstc; + scdp->close = NULL; + return 0; +} diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 65f6854..39b27e5 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -29,6 +29,7 @@ initrd= dtb= dts= cacheit= +binary= gzip=.gz # cross-compilation prefix @@ -142,17 +143,23 @@ miboot|uboot) isection=initrd ;; cuboot*) + binary=y gzip= ;; ps3) platformo="$object/ps3-head.o $object/ps3-hvcall.o $object/ps3.o" lds=$object/zImage.ps3.lds + binary=y gzip= ext=bin objflags="-O binary --set-section-flags=.bss=contents,alloc,load,data" ksection=.kernel:vmlinux.bin isection=.kernel:initrd ;; +ep88xc) + platformo="$object/fixed-head.o $object/$platform.o" + binary=y + ;; esac vmz="$tmpdir/`basename \"$kernel\"`.$ext" @@ -224,6 +231,11 @@ fi base=0x`${CROSS}nm "$ofile" | grep ' _start$' | cut -d' ' -f1` entry=`${CROSS}objdump -f "$ofile" | grep '^start address ' | cut -d' ' -f3` +if [ -n "$binary" ]; then + mv "$ofile" "$ofile".elf + ${CROSS}objcopy -O binary "$ofile".elf "$ofile".bin +fi + # post-processing needed for some platforms case "$platform" in pseries|chrp) @@ -234,8 +246,6 @@ coff) $object/hack-coff "$ofile" ;; cuboot*) - mv "$ofile" "$ofile".elf - ${CROSS}objcopy -O binary "$ofile".elf "$ofile".bin gzip -f -9 "$ofile".bin mkimage -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \ $uboot_version -d "$ofile".bin.gz "$ofile" @@ -259,11 +269,11 @@ ps3) # then copied to offset 0x100. At runtime the bootwrapper program # copies the 0x100 bytes at __system_reset_kernel to addr 0x100. - system_reset_overlay=0x`${CROSS}nm "$ofile" \ + system_reset_overlay=0x`${CROSS}nm "$ofile".elf \ | grep ' __system_reset_overlay$' \ | cut -d' ' -f1` system_reset_overlay=`printf "%d" $system_reset_overlay` - system_reset_kernel=0x`${CROSS}nm "$ofile" \ + system_reset_kernel=0x`${CROSS}nm "$ofile".elf \ | grep ' __system_reset_kernel$' \ | cut -d' ' -f1` system_reset_kernel=`printf "%d" $system_reset_kernel` @@ -272,8 +282,6 @@ ps3) rm -f "$object/otheros.bld" - ${CROSS}objcopy -O binary "$ofile" "$ofile.bin" - msg=$(dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \ skip=$overlay_dest seek=$system_reset_kernel \ count=$overlay_size bs=1 2>&1) |
