summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/boot/dts/katmai.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/boot/dts/katmai.dts')
-rw-r--r--arch/powerpc/boot/dts/katmai.dts71
1 files changed, 52 insertions, 19 deletions
diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts
index 8f345de9..8cf2c0c 100644
--- a/arch/powerpc/boot/dts/katmai.dts
+++ b/arch/powerpc/boot/dts/katmai.dts
@@ -156,7 +156,7 @@
compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x00000000 0x00000004 0xe0000000 0x20000000>;
+ ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>;
clock-frequency = <0>; /* Filled in by zImage */
EBC0: ebc {
@@ -165,14 +165,47 @@
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by zImage */
+ /* ranges property is supplied by U-Boot */
interrupts = <0x5 0x1>;
interrupt-parent = <&UIC1>;
+
+ nor_flash@0,0 {
+ compatible = "cfi-flash";
+ bank-width = <2>;
+ reg = <0x00000000 0x00000000 0x01000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "kernel";
+ reg = <0x00000000 0x001e0000>;
+ };
+ partition@1e0000 {
+ label = "dtb";
+ reg = <0x001e0000 0x00020000>;
+ };
+ partition@200000 {
+ label = "root";
+ reg = <0x00200000 0x00200000>;
+ };
+ partition@400000 {
+ label = "user";
+ reg = <0x00400000 0x00b60000>;
+ };
+ partition@f60000 {
+ label = "env";
+ reg = <0x00f60000 0x00040000>;
+ };
+ partition@fa0000 {
+ label = "u-boot";
+ reg = <0x00fa0000 0x00060000>;
+ };
+ };
};
- UART0: serial@10000200 {
+ UART0: serial@f0000200 {
device_type = "serial";
compatible = "ns16550";
- reg = <0x10000200 0x00000008>;
+ reg = <0xf0000200 0x00000008>;
virtual-reg = <0xa0000200>;
clock-frequency = <0>; /* Filled in by zImage */
current-speed = <115200>;
@@ -180,10 +213,10 @@
interrupts = <0x0 0x4>;
};
- UART1: serial@10000300 {
+ UART1: serial@f0000300 {
device_type = "serial";
compatible = "ns16550";
- reg = <0x10000300 0x00000008>;
+ reg = <0xf0000300 0x00000008>;
virtual-reg = <0xa0000300>;
clock-frequency = <0>;
current-speed = <0>;
@@ -192,10 +225,10 @@
};
- UART2: serial@10000600 {
+ UART2: serial@f0000600 {
device_type = "serial";
compatible = "ns16550";
- reg = <0x10000600 0x00000008>;
+ reg = <0xf0000600 0x00000008>;
virtual-reg = <0xa0000600>;
clock-frequency = <0>;
current-speed = <0>;
@@ -203,27 +236,27 @@
interrupts = <0x5 0x4>;
};
- IIC0: i2c@10000400 {
+ IIC0: i2c@f0000400 {
compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
- reg = <0x10000400 0x00000014>;
+ reg = <0xf0000400 0x00000014>;
interrupt-parent = <&UIC0>;
interrupts = <0x2 0x4>;
};
- IIC1: i2c@10000500 {
+ IIC1: i2c@f0000500 {
compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
- reg = <0x10000500 0x00000014>;
+ reg = <0xf0000500 0x00000014>;
interrupt-parent = <&UIC0>;
interrupts = <0x3 0x4>;
};
- EMAC0: ethernet@10000800 {
+ EMAC0: ethernet@f0000800 {
linux,network-index = <0x0>;
device_type = "network";
compatible = "ibm,emac-440spe", "ibm,emac4";
interrupt-parent = <&UIC1>;
interrupts = <0x1c 0x4 0x1d 0x4>;
- reg = <0x10000800 0x00000074>;
+ reg = <0xf0000800 0x00000074>;
local-mac-address = [000000000000];
mal-device = <&MAL0>;
mal-tx-channel = <0>;
@@ -248,11 +281,11 @@
primary;
large-inbound-windows;
enable-msi-hole;
- reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */
- 0x00000000 0x00000000 0x00000000 /* no IACK cycles */
- 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */
- 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */
- 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
+ reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */
+ 0x00000000 0x00000000 0x00000000 /* no IACK cycles */
+ 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */
+ 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */
+ 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed
@@ -453,6 +486,6 @@
};
chosen {
- linux,stdout-path = "/plb/opb/serial@10000200";
+ linux,stdout-path = "/plb/opb/serial@f0000200";
};
};
OpenPOWER on IntegriCloud