summaryrefslogtreecommitdiffstats
path: root/arch/mn10300/include/asm/dma.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mn10300/include/asm/dma.h')
-rw-r--r--arch/mn10300/include/asm/dma.h117
1 files changed, 0 insertions, 117 deletions
diff --git a/arch/mn10300/include/asm/dma.h b/arch/mn10300/include/asm/dma.h
deleted file mode 100644
index 10b77d4..0000000
--- a/arch/mn10300/include/asm/dma.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/* MN10300 ISA DMA handlers and definitions
- *
- * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_DMA_H
-#define _ASM_DMA_H
-
-#include <linux/spinlock.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-
-#undef MAX_DMA_CHANNELS /* switch off linux/kernel/dma.c */
-#define MAX_DMA_ADDRESS 0xbfffffff
-
-extern spinlock_t dma_spin_lock;
-
-static inline unsigned long claim_dma_lock(void)
-{
- unsigned long flags;
- spin_lock_irqsave(&dma_spin_lock, flags);
- return flags;
-}
-
-static inline void release_dma_lock(unsigned long flags)
-{
- spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* enable/disable a specific DMA channel */
-static inline void enable_dma(unsigned int dmanr)
-{
-}
-
-static inline void disable_dma(unsigned int dmanr)
-{
-}
-
-/* Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while holding the DMA lock ! ---
- */
-static inline void clear_dma_ff(unsigned int dmanr)
-{
-}
-
-/* set mode (above) for a specific DMA channel */
-static inline void set_dma_mode(unsigned int dmanr, char mode)
-{
-}
-
-/* Set only the page register bits of the transfer address.
- * This is used for successive transfers when we know the contents of
- * the lower 16 bits of the DMA current address register, but a 64k boundary
- * may have been crossed.
- */
-static inline void set_dma_page(unsigned int dmanr, char pagenr)
-{
-}
-
-
-/* Set transfer address & page bits for specific DMA channel.
- * Assumes dma flipflop is clear.
- */
-static inline void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-}
-
-
-/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
- * a specific DMA channel.
- * You must ensure the parameters are valid.
- * NOTE: from a manual: "the number of transfers is one more
- * than the initial word count"! This is taken into account.
- * Assumes dma flip-flop is clear.
- * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
- */
-static inline void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-}
-
-
-/* Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * If called before the channel has been used, it may return 1.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- *
- * Assumes DMA flip-flop is clear.
- */
-static inline int get_dma_residue(unsigned int dmanr)
-{
- return 0;
-}
-
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char *device_id);
-extern void free_dma(unsigned int dmanr);
-
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy (0)
-#endif
-
-#endif /* _ASM_DMA_H */
OpenPOWER on IntegriCloud