summaryrefslogtreecommitdiffstats
path: root/arch/mips
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips')
-rw-r--r--arch/mips/Kconfig14
-rw-r--r--arch/mips/include/asm/Kbuild1
-rw-r--r--arch/mips/include/asm/idle.h1
-rw-r--r--arch/mips/include/asm/mipsregs.h2
-rw-r--r--arch/mips/include/asm/r4kcache.h4
-rw-r--r--arch/mips/include/uapi/asm/siginfo.h4
-rw-r--r--arch/mips/include/uapi/asm/socket.h5
-rw-r--r--arch/mips/include/uapi/asm/unistd.h2
-rw-r--r--arch/mips/kernel/bmips_vec.S3
-rw-r--r--arch/mips/kernel/cps-vec.S2
-rw-r--r--arch/mips/kernel/cpu-probe.c33
-rw-r--r--arch/mips/kernel/rtlx.c4
-rw-r--r--arch/mips/kernel/setup.c4
-rw-r--r--arch/mips/kernel/signal.c8
-rw-r--r--arch/mips/loongson/common/Makefile3
-rw-r--r--arch/mips/mm/tlbex.c10
-rw-r--r--arch/mips/mti-sead3/sead3-leds.c8
-rw-r--r--arch/mips/net/bpf_jit.c4
-rw-r--r--arch/mips/netlogic/xlp/Makefile12
-rw-r--r--arch/mips/pci/msi-octeon.c2
-rw-r--r--arch/mips/pci/msi-xlp.c12
-rw-r--r--arch/mips/pci/pci-xlr.c2
22 files changed, 101 insertions, 39 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 0a8e88d..3289969 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2127,9 +2127,17 @@ config SB1_PASS_2_1_WORKAROUNDS
config ARCH_PHYS_ADDR_T_64BIT
bool
+choice
+ prompt "SmartMIPS or microMIPS ASE support"
+
+config CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS
+ bool "None"
+ help
+ Select this if you want neither microMIPS nor SmartMIPS support
+
config CPU_HAS_SMARTMIPS
depends on SYS_SUPPORTS_SMARTMIPS
- bool "Support for the SmartMIPS ASE"
+ bool "SmartMIPS"
help
SmartMIPS is a extension of the MIPS32 architecture aimed at
increased security at both hardware and software level for
@@ -2141,11 +2149,13 @@ config CPU_HAS_SMARTMIPS
config CPU_MICROMIPS
depends on 32BIT && SYS_SUPPORTS_MICROMIPS
- bool "Build kernel using microMIPS ISA"
+ bool "microMIPS"
help
When this option is enabled the kernel will be built using the
microMIPS ISA
+endchoice
+
config CPU_HAS_MSA
bool "Support for the MIPS SIMD Architecture (EXPERIMENTAL)"
depends on CPU_SUPPORTS_MSA
diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild
index 72e1cf1..200efea 100644
--- a/arch/mips/include/asm/Kbuild
+++ b/arch/mips/include/asm/Kbuild
@@ -3,7 +3,6 @@ generic-y += cputime.h
generic-y += current.h
generic-y += dma-contiguous.h
generic-y += emergency-restart.h
-generic-y += hash.h
generic-y += irq_work.h
generic-y += local64.h
generic-y += mcs_spinlock.h
diff --git a/arch/mips/include/asm/idle.h b/arch/mips/include/asm/idle.h
index 1c967ab..a2d18ab 100644
--- a/arch/mips/include/asm/idle.h
+++ b/arch/mips/include/asm/idle.h
@@ -22,7 +22,6 @@ extern int mips_cpuidle_wait_enter(struct cpuidle_device *dev,
.exit_latency = 1,\
.target_residency = 1,\
.power_usage = UINT_MAX,\
- .flags = CPUIDLE_FLAG_TIME_VALID,\
.name = "wait",\
.desc = "MIPS wait",\
}
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 087b2af..5e4aef3 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -664,6 +664,8 @@
#define MIPS_CONF6_SYND (_ULCAST_(1) << 13)
/* proAptiv FTLB on/off bit */
#define MIPS_CONF6_FTLBEN (_ULCAST_(1) << 15)
+/* FTLB probability bits */
+#define MIPS_CONF6_FTLBP_SHIFT (16)
#define MIPS_CONF7_WII (_ULCAST_(1) << 31)
diff --git a/arch/mips/include/asm/r4kcache.h b/arch/mips/include/asm/r4kcache.h
index 617d2b8..e293a8d 100644
--- a/arch/mips/include/asm/r4kcache.h
+++ b/arch/mips/include/asm/r4kcache.h
@@ -198,7 +198,11 @@ static inline void protected_flush_icache_line(unsigned long addr)
*/
static inline void protected_writeback_dcache_line(unsigned long addr)
{
+#ifdef CONFIG_EVA
+ protected_cachee_op(Hit_Writeback_Inv_D, addr);
+#else
protected_cache_op(Hit_Writeback_Inv_D, addr);
+#endif
}
static inline void protected_writeback_scache_line(unsigned long addr)
diff --git a/arch/mips/include/uapi/asm/siginfo.h b/arch/mips/include/uapi/asm/siginfo.h
index e811744..d08f83f 100644
--- a/arch/mips/include/uapi/asm/siginfo.h
+++ b/arch/mips/include/uapi/asm/siginfo.h
@@ -92,6 +92,10 @@ typedef struct siginfo {
int _trapno; /* TRAP # which caused the signal */
#endif
short _addr_lsb;
+ struct {
+ void __user *_lower;
+ void __user *_upper;
+ } _addr_bnd;
} _sigfault;
/* SIGPOLL, SIGXFSZ (To do ...) */
diff --git a/arch/mips/include/uapi/asm/socket.h b/arch/mips/include/uapi/asm/socket.h
index a14baa2..dec3c85 100644
--- a/arch/mips/include/uapi/asm/socket.h
+++ b/arch/mips/include/uapi/asm/socket.h
@@ -98,4 +98,9 @@
#define SO_BPF_EXTENSIONS 48
+#define SO_INCOMING_CPU 49
+
+#define SO_ATTACH_BPF 50
+#define SO_DETACH_BPF SO_DETACH_FILTER
+
#endif /* _UAPI_ASM_SOCKET_H */
diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h
index 9dc5856..d001bb1 100644
--- a/arch/mips/include/uapi/asm/unistd.h
+++ b/arch/mips/include/uapi/asm/unistd.h
@@ -1045,7 +1045,7 @@
#define __NR_seccomp (__NR_Linux + 316)
#define __NR_getrandom (__NR_Linux + 317)
#define __NR_memfd_create (__NR_Linux + 318)
-#define __NR_memfd_create (__NR_Linux + 319)
+#define __NR_bpf (__NR_Linux + 319)
/*
* Offset of the last N32 flavoured syscall
diff --git a/arch/mips/kernel/bmips_vec.S b/arch/mips/kernel/bmips_vec.S
index 290c23b..8649507 100644
--- a/arch/mips/kernel/bmips_vec.S
+++ b/arch/mips/kernel/bmips_vec.S
@@ -208,7 +208,6 @@ bmips_reset_nmi_vec_end:
END(bmips_reset_nmi_vec)
.set pop
- .previous
/***********************************************************************
* CPU1 warm restart vector (used for second and subsequent boots).
@@ -281,5 +280,3 @@ LEAF(bmips_enable_xks01)
jr ra
END(bmips_enable_xks01)
-
- .previous
diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S
index e6e97d2..0384b05 100644
--- a/arch/mips/kernel/cps-vec.S
+++ b/arch/mips/kernel/cps-vec.S
@@ -229,6 +229,7 @@ LEAF(mips_cps_core_init)
nop
.set push
+ .set mips32r2
.set mt
/* Only allow 1 TC per VPE to execute... */
@@ -345,6 +346,7 @@ LEAF(mips_cps_boot_vpes)
nop
.set push
+ .set mips32r2
.set mt
1: /* Enter VPE configuration state */
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index de8dc4c..5342674 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -250,6 +250,32 @@ static void set_isa(struct cpuinfo_mips *c, unsigned int isa)
static char unknown_isa[] = KERN_ERR \
"Unsupported ISA type, c0.config0: %d.";
+static unsigned int calculate_ftlb_probability(struct cpuinfo_mips *c)
+{
+
+ unsigned int probability = c->tlbsize / c->tlbsizevtlb;
+
+ /*
+ * 0 = All TLBWR instructions go to FTLB
+ * 1 = 15:1: For every 16 TBLWR instructions, 15 go to the
+ * FTLB and 1 goes to the VTLB.
+ * 2 = 7:1: As above with 7:1 ratio.
+ * 3 = 3:1: As above with 3:1 ratio.
+ *
+ * Use the linear midpoint as the probability threshold.
+ */
+ if (probability >= 12)
+ return 1;
+ else if (probability >= 6)
+ return 2;
+ else
+ /*
+ * So FTLB is less than 4 times bigger than VTLB.
+ * A 3:1 ratio can still be useful though.
+ */
+ return 3;
+}
+
static void set_ftlb_enable(struct cpuinfo_mips *c, int enable)
{
unsigned int config6;
@@ -260,9 +286,14 @@ static void set_ftlb_enable(struct cpuinfo_mips *c, int enable)
case CPU_P5600:
/* proAptiv & related cores use Config6 to enable the FTLB */
config6 = read_c0_config6();
+ /* Clear the old probability value */
+ config6 &= ~(3 << MIPS_CONF6_FTLBP_SHIFT);
if (enable)
/* Enable FTLB */
- write_c0_config6(config6 | MIPS_CONF6_FTLBEN);
+ write_c0_config6(config6 |
+ (calculate_ftlb_probability(c)
+ << MIPS_CONF6_FTLBP_SHIFT)
+ | MIPS_CONF6_FTLBEN);
else
/* Disable FTLB */
write_c0_config6(config6 & ~MIPS_CONF6_FTLBEN);
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index 31b1b76..c5c4fd5 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -94,12 +94,12 @@ int rtlx_open(int index, int can_sleep)
int ret = 0;
if (index >= RTLX_CHANNELS) {
- pr_debug(KERN_DEBUG "rtlx_open index out of range\n");
+ pr_debug("rtlx_open index out of range\n");
return -ENOSYS;
}
if (atomic_inc_return(&channel_wqs[index].in_open) > 1) {
- pr_debug(KERN_DEBUG "rtlx_open channel %d already opened\n", index);
+ pr_debug("rtlx_open channel %d already opened\n", index);
ret = -EBUSY;
goto out_fail;
}
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index a51c023..a8c20af 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -485,7 +485,7 @@ static void __init bootmem_init(void)
* NOTE: historically plat_mem_setup did the entire platform initialization.
* This was rather impractical because it meant plat_mem_setup had to
* get away without any kind of memory allocator. To keep old code from
- * breaking plat_setup was just renamed to plat_setup and a second platform
+ * breaking plat_setup was just renamed to plat_mem_setup and a second platform
* initialization hook for anything else was introduced.
*/
@@ -493,7 +493,7 @@ static int usermem __initdata;
static int __init early_parse_mem(char *p)
{
- unsigned long start, size;
+ phys_t start, size;
/*
* If a user specifies memory size, we
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index 0422bf1..545bf11 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -658,13 +658,13 @@ static int signal_setup(void)
save_fp_context = _save_fp_context;
restore_fp_context = _restore_fp_context;
} else {
- save_fp_context = copy_fp_from_sigcontext;
- restore_fp_context = copy_fp_to_sigcontext;
+ save_fp_context = copy_fp_to_sigcontext;
+ restore_fp_context = copy_fp_from_sigcontext;
}
#endif /* CONFIG_SMP */
#else
- save_fp_context = copy_fp_from_sigcontext;;
- restore_fp_context = copy_fp_to_sigcontext;
+ save_fp_context = copy_fp_to_sigcontext;
+ restore_fp_context = copy_fp_from_sigcontext;
#endif
return 0;
diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile
index 0bb9cc9..d87e033 100644
--- a/arch/mips/loongson/common/Makefile
+++ b/arch/mips/loongson/common/Makefile
@@ -11,7 +11,8 @@ obj-$(CONFIG_PCI) += pci.o
# Serial port support
#
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-obj-$(CONFIG_SERIAL_8250) += serial.o
+loongson-serial-$(CONFIG_SERIAL_8250) := serial.o
+obj-y += $(loongson-serial-m) $(loongson-serial-y)
obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o
obj-$(CONFIG_LOONGSON_MC146818) += rtc.o
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 7994368..3978a3d 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -1872,8 +1872,16 @@ build_r4000_tlbchange_handler_head(u32 **p, struct uasm_label **l,
uasm_l_smp_pgtable_change(l, *p);
#endif
iPTE_LW(p, wr.r1, wr.r2); /* get even pte */
- if (!m4kc_tlbp_war())
+ if (!m4kc_tlbp_war()) {
build_tlb_probe_entry(p);
+ if (cpu_has_htw) {
+ /* race condition happens, leaving */
+ uasm_i_ehb(p);
+ uasm_i_mfc0(p, wr.r3, C0_INDEX);
+ uasm_il_bltz(p, r, wr.r3, label_leave);
+ uasm_i_nop(p);
+ }
+ }
return wr;
}
diff --git a/arch/mips/mti-sead3/sead3-leds.c b/arch/mips/mti-sead3/sead3-leds.c
index 20102a6..c427c57 100644
--- a/arch/mips/mti-sead3/sead3-leds.c
+++ b/arch/mips/mti-sead3/sead3-leds.c
@@ -5,7 +5,7 @@
*
* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
*/
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
@@ -76,8 +76,4 @@ static int __init led_init(void)
return platform_device_register(&fled_device);
}
-module_init(led_init);
-
-MODULE_AUTHOR("Chris Dearman <chris@mips.com>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("LED probe driver for SEAD-3");
+device_initcall(led_init);
diff --git a/arch/mips/net/bpf_jit.c b/arch/mips/net/bpf_jit.c
index 9b55143..9fd6834 100644
--- a/arch/mips/net/bpf_jit.c
+++ b/arch/mips/net/bpf_jit.c
@@ -426,7 +426,7 @@ static inline void emit_mod(unsigned int dst, unsigned int src,
u32 *p = &ctx->target[ctx->idx];
uasm_i_divu(&p, dst, src);
p = &ctx->target[ctx->idx + 1];
- uasm_i_mflo(&p, dst);
+ uasm_i_mfhi(&p, dst);
}
ctx->idx += 2; /* 2 insts */
}
@@ -971,7 +971,7 @@ load_ind:
break;
case BPF_ALU | BPF_MOD | BPF_K:
/* A %= k */
- if (k == 1 || optimize_div(&k)) {
+ if (k == 1) {
ctx->flags |= SEEN_A;
emit_jit_reg_move(r_A, r_zero, ctx);
} else {
diff --git a/arch/mips/netlogic/xlp/Makefile b/arch/mips/netlogic/xlp/Makefile
index be358a8..6b43af0a 100644
--- a/arch/mips/netlogic/xlp/Makefile
+++ b/arch/mips/netlogic/xlp/Makefile
@@ -1,6 +1,10 @@
obj-y += setup.o nlm_hal.o cop2-ex.o dt.o
obj-$(CONFIG_SMP) += wakeup.o
-obj-$(CONFIG_USB) += usb-init.o
-obj-$(CONFIG_USB) += usb-init-xlp2.o
-obj-$(CONFIG_SATA_AHCI) += ahci-init.o
-obj-$(CONFIG_SATA_AHCI) += ahci-init-xlp2.o
+ifdef CONFIG_USB
+obj-y += usb-init.o
+obj-y += usb-init-xlp2.o
+endif
+ifdef CONFIG_SATA_AHCI
+obj-y += ahci-init.o
+obj-y += ahci-init-xlp2.o
+endif
diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
index 63bbe07..cffaaf4 100644
--- a/arch/mips/pci/msi-octeon.c
+++ b/arch/mips/pci/msi-octeon.c
@@ -178,7 +178,7 @@ msi_irq_allocated:
pci_write_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, control);
irq_set_msi_desc(irq, desc);
- write_msi_msg(irq, &msg);
+ pci_write_msi_msg(irq, &msg);
return 0;
}
diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
index f7ac3ed..6a40f24 100644
--- a/arch/mips/pci/msi-xlp.c
+++ b/arch/mips/pci/msi-xlp.c
@@ -217,7 +217,7 @@ static void xlp_msix_mask_ack(struct irq_data *d)
msixvec = nlm_irq_msixvec(d->irq);
link = nlm_irq_msixlink(msixvec);
- mask_msi_irq(d);
+ pci_msi_mask_irq(d);
md = irq_data_get_irq_handler_data(d);
/* Ack MSI on bridge */
@@ -239,10 +239,10 @@ static void xlp_msix_mask_ack(struct irq_data *d)
static struct irq_chip xlp_msix_chip = {
.name = "XLP-MSIX",
- .irq_enable = unmask_msi_irq,
- .irq_disable = mask_msi_irq,
+ .irq_enable = pci_msi_unmask_irq,
+ .irq_disable = pci_msi_mask_irq,
.irq_mask_ack = xlp_msix_mask_ack,
- .irq_unmask = unmask_msi_irq,
+ .irq_unmask = pci_msi_unmask_irq,
};
void arch_teardown_msi_irq(unsigned int irq)
@@ -345,7 +345,7 @@ static int xlp_setup_msi(uint64_t lnkbase, int node, int link,
if (ret < 0)
return ret;
- write_msi_msg(xirq, &msg);
+ pci_write_msi_msg(xirq, &msg);
return 0;
}
@@ -446,7 +446,7 @@ static int xlp_setup_msix(uint64_t lnkbase, int node, int link,
if (ret < 0)
return ret;
- write_msi_msg(xirq, &msg);
+ pci_write_msi_msg(xirq, &msg);
return 0;
}
diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c
index 0dde803..26d2dab 100644
--- a/arch/mips/pci/pci-xlr.c
+++ b/arch/mips/pci/pci-xlr.c
@@ -260,7 +260,7 @@ int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
if (ret < 0)
return ret;
- write_msi_msg(irq, &msg);
+ pci_write_msi_msg(irq, &msg);
return 0;
}
#endif
OpenPOWER on IntegriCloud