summaryrefslogtreecommitdiffstats
path: root/arch/mips
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips')
-rw-r--r--arch/mips/alchemy/common/power.c266
-rw-r--r--arch/mips/alchemy/common/reset.c2
-rw-r--r--arch/mips/alchemy/common/sleeper.S118
-rw-r--r--arch/mips/include/asm/mach-au1x00/au1000.h6
4 files changed, 225 insertions, 167 deletions
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index 997dd56..f08312b 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -35,7 +35,6 @@
#include <linux/jiffies.h>
#include <asm/uaccess.h>
-#include <asm/cacheflush.h>
#include <asm/mach-au1x00/au1000.h>
#ifdef CONFIG_PM
@@ -47,8 +46,6 @@
#define DPRINTK(fmt, args...)
#endif
-static void au1000_calibrate_delay(void);
-
extern unsigned long save_local_and_disable(int controller);
extern void restore_local_and_enable(int controller, unsigned long mask);
@@ -64,17 +61,15 @@ static DEFINE_SPINLOCK(pm_lock);
* We only have to save/restore registers that aren't otherwise
* done as part of a driver pm_* function.
*/
-static unsigned int sleep_aux_pll_cntrl;
-static unsigned int sleep_cpu_pll_cntrl;
-static unsigned int sleep_pin_function;
-static unsigned int sleep_uart0_inten;
-static unsigned int sleep_uart0_fifoctl;
-static unsigned int sleep_uart0_linectl;
-static unsigned int sleep_uart0_clkdiv;
-static unsigned int sleep_uart0_enable;
-static unsigned int sleep_usbhost_enable;
-static unsigned int sleep_usbdev_enable;
-static unsigned int sleep_static_memctlr[4][3];
+static unsigned int sleep_uart0_inten;
+static unsigned int sleep_uart0_fifoctl;
+static unsigned int sleep_uart0_linectl;
+static unsigned int sleep_uart0_clkdiv;
+static unsigned int sleep_uart0_enable;
+static unsigned int sleep_usb[2];
+static unsigned int sleep_sys_clocks[5];
+static unsigned int sleep_sys_pinfunc;
+static unsigned int sleep_static_memctlr[4][3];
/*
* Define this to cause the value you write to /proc/sys/pm/sleep to
@@ -108,31 +103,45 @@ static void save_core_regs(void)
sleep_uart0_linectl = au_readl(UART0_ADDR + UART_LCR);
sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK);
sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL);
+ au_sync();
+#ifndef CONFIG_SOC_AU1200
/* Shutdown USB host/device. */
- sleep_usbhost_enable = au_readl(USB_HOST_CONFIG);
+ sleep_usb[0] = au_readl(USB_HOST_CONFIG);
/* There appears to be some undocumented reset register.... */
- au_writel(0, 0xb0100004); au_sync();
- au_writel(0, USB_HOST_CONFIG); au_sync();
+ au_writel(0, 0xb0100004);
+ au_sync();
+ au_writel(0, USB_HOST_CONFIG);
+ au_sync();
+
+ sleep_usb[1] = au_readl(USBD_ENABLE);
+ au_writel(0, USBD_ENABLE);
+ au_sync();
+
+#else /* AU1200 */
- sleep_usbdev_enable = au_readl(USBD_ENABLE);
- au_writel(0, USBD_ENABLE); au_sync();
+ /* enable access to OTG mmio so we can save OTG CAP/MUX.
+ * FIXME: write an OTG driver and move this stuff there!
+ */
+ au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4);
+ au_sync();
+ sleep_usb[0] = au_readl(0xb4020020); /* OTG_CAP */
+ sleep_usb[1] = au_readl(0xb4020024); /* OTG_MUX */
+#endif
/* Save interrupt controller state. */
save_au1xxx_intctl();
/* Clocks and PLLs. */
- sleep_aux_pll_cntrl = au_readl(SYS_AUXPLL);
+ sleep_sys_clocks[0] = au_readl(SYS_FREQCTRL0);
+ sleep_sys_clocks[1] = au_readl(SYS_FREQCTRL1);
+ sleep_sys_clocks[2] = au_readl(SYS_CLKSRC);
+ sleep_sys_clocks[3] = au_readl(SYS_CPUPLL);
+ sleep_sys_clocks[4] = au_readl(SYS_AUXPLL);
- /*
- * We don't really need to do this one, but unless we
- * write it again it won't have a valid value if we
- * happen to read it.
- */
- sleep_cpu_pll_cntrl = au_readl(SYS_CPUPLL);
-
- sleep_pin_function = au_readl(SYS_PINFUNC);
+ /* pin mux config */
+ sleep_sys_pinfunc = au_readl(SYS_PINFUNC);
/* Save the static memory controller configuration. */
sleep_static_memctlr[0][0] = au_readl(MEM_STCFG0);
@@ -151,12 +160,37 @@ static void save_core_regs(void)
static void restore_core_regs(void)
{
- extern void restore_au1xxx_intctl(void);
- extern void wakeup_counter0_adjust(void);
+ /* restore clock configuration. Writing CPUPLL last will
+ * stall a bit and stabilize other clocks (unless this is
+ * one of those Au1000 with a write-only PLL, where we dont
+ * have a valid value)
+ */
+ au_writel(sleep_sys_clocks[0], SYS_FREQCTRL0);
+ au_writel(sleep_sys_clocks[1], SYS_FREQCTRL1);
+ au_writel(sleep_sys_clocks[2], SYS_CLKSRC);
+ au_writel(sleep_sys_clocks[4], SYS_AUXPLL);
+ if (!au1xxx_cpu_has_pll_wo())
+ au_writel(sleep_sys_clocks[3], SYS_CPUPLL);
+ au_sync();
+
+ au_writel(sleep_sys_pinfunc, SYS_PINFUNC);
+ au_sync();
+
+#ifndef CONFIG_SOC_AU1200
+ au_writel(sleep_usb[0], USB_HOST_CONFIG);
+ au_writel(sleep_usb[1], USBD_ENABLE);
+ au_sync();
+#else
+ /* enable accces to OTG memory */
+ au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4);
+ au_sync();
- au_writel(sleep_aux_pll_cntrl, SYS_AUXPLL); au_sync();
- au_writel(sleep_cpu_pll_cntrl, SYS_CPUPLL); au_sync();
- au_writel(sleep_pin_function, SYS_PINFUNC); au_sync();
+ /* restore OTG caps and port mux. */
+ au_writel(sleep_usb[0], 0xb4020020 + 0); /* OTG_CAP */
+ au_sync();
+ au_writel(sleep_usb[1], 0xb4020020 + 4); /* OTG_MUX */
+ au_sync();
+#endif
/* Restore the static memory controller configuration. */
au_writel(sleep_static_memctlr[0][0], MEM_STCFG0);
@@ -196,16 +230,45 @@ void wakeup_from_suspend(void)
suspend_mode = 0;
}
-int au_sleep(void)
+void au_sleep(void)
+{
+ save_core_regs();
+ au1xxx_save_and_sleep();
+ restore_core_regs();
+}
+
+static int pm_do_sleep(ctl_table *ctl, int write, struct file *file,
+ void __user *buffer, size_t *len, loff_t *ppos)
{
unsigned long wakeup, flags;
- extern void save_and_sleep(void);
+ int ret;
+#ifdef SLEEP_TEST_TIMEOUT
+#define TMPBUFLEN2 16
+ char buf[TMPBUFLEN2], *p;
+#endif
spin_lock_irqsave(&pm_lock, flags);
- save_core_regs();
+ if (!write) {
+ *len = 0;
+ ret = 0;
+ goto out_unlock;
+ };
- flush_cache_all();
+#ifdef SLEEP_TEST_TIMEOUT
+ if (*len > TMPBUFLEN2 - 1) {
+ ret = -EFAULT;
+ goto out_unlock;
+ }
+ if (copy_from_user(buf, buffer, *len)) {
+ return -EFAULT;
+ goto out_unlock;
+ }
+ buf[*len] = 0;
+ p = buf;
+ sleep_ticks = simple_strtoul(p, &p, 0);
+ wakeup_counter0_set(sleep_ticks);
+#endif
/**
** The code below is all system dependent and we should probably
@@ -223,9 +286,6 @@ int au_sleep(void)
wakeup |= 1 << 6; /* turn on GPIO 6 wakeup */
#else
/* For testing, allow match20 to wake us up. */
-#ifdef SLEEP_TEST_TIMEOUT
- wakeup_counter0_set(sleep_ticks);
-#endif
wakeup = 1 << 8; /* turn on match20 wakeup */
wakeup = 0;
#endif
@@ -234,41 +294,62 @@ int au_sleep(void)
au_writel(wakeup, SYS_WAKEMSK);
au_sync();
- save_and_sleep();
+ au_sleep();
+ ret = 0;
- /*
- * After a wakeup, the cpu vectors back to 0x1fc00000, so
- * it's up to the boot code to get us back here.
- */
- restore_core_regs();
+out_unlock:
spin_unlock_irqrestore(&pm_lock, flags);
- return 0;
+ return ret;
}
-static int pm_do_sleep(ctl_table *ctl, int write, struct file *file,
- void __user *buffer, size_t *len, loff_t *ppos)
+#if !defined(CONFIG_SOC_AU1200) && !defined(CONFIG_SOC_AU1550)
+
+/*
+ * This is right out of init/main.c
+ */
+
+/*
+ * This is the number of bits of precision for the loops_per_jiffy.
+ * Each bit takes on average 1.5/HZ seconds. This (like the original)
+ * is a little better than 1%.
+ */
+#define LPS_PREC 8
+
+static void au1000_calibrate_delay(void)
{
-#ifdef SLEEP_TEST_TIMEOUT
-#define TMPBUFLEN2 16
- char buf[TMPBUFLEN2], *p;
-#endif
+ unsigned long ticks, loopbit;
+ int lps_precision = LPS_PREC;
- if (!write)
- *len = 0;
- else {
-#ifdef SLEEP_TEST_TIMEOUT
- if (*len > TMPBUFLEN2 - 1)
- return -EFAULT;
- if (copy_from_user(buf, buffer, *len))
- return -EFAULT;
- buf[*len] = 0;
- p = buf;
- sleep_ticks = simple_strtoul(p, &p, 0);
-#endif
+ loops_per_jiffy = 1 << 12;
- au_sleep();
+ while (loops_per_jiffy <<= 1) {
+ /* Wait for "start of" clock tick */
+ ticks = jiffies;
+ while (ticks == jiffies)
+ /* nothing */ ;
+ /* Go ... */
+ ticks = jiffies;
+ __delay(loops_per_jiffy);
+ ticks = jiffies - ticks;
+ if (ticks)
+ break;
+ }
+
+ /*
+ * Do a binary approximation to get loops_per_jiffy set to be equal
+ * one clock (up to lps_precision bits)
+ */
+ loops_per_jiffy >>= 1;
+ loopbit = loops_per_jiffy;
+ while (lps_precision-- && (loopbit >>= 1)) {
+ loops_per_jiffy |= loopbit;
+ ticks = jiffies;
+ while (ticks == jiffies);
+ ticks = jiffies;
+ __delay(loops_per_jiffy);
+ if (jiffies != ticks) /* longer than 1 tick */
+ loops_per_jiffy &= ~loopbit;
}
- return 0;
}
static int pm_do_freq(ctl_table *ctl, int write, struct file *file,
@@ -377,7 +458,7 @@ static int pm_do_freq(ctl_table *ctl, int write, struct file *file,
return retval;
}
-
+#endif
static struct ctl_table pm_table[] = {
{
@@ -388,6 +469,7 @@ static struct ctl_table pm_table[] = {
.mode = 0600,
.proc_handler = &pm_do_sleep
},
+#if !defined(CONFIG_SOC_AU1200) && !defined(CONFIG_SOC_AU1550)
{
.ctl_name = CTL_UNNUMBERED,
.procname = "freq",
@@ -396,6 +478,7 @@ static struct ctl_table pm_table[] = {
.mode = 0600,
.proc_handler = &pm_do_freq
},
+#endif
{}
};
@@ -429,51 +512,4 @@ static int __init pm_init(void)
__initcall(pm_init);
-/*
- * This is right out of init/main.c
- */
-
-/*
- * This is the number of bits of precision for the loops_per_jiffy.
- * Each bit takes on average 1.5/HZ seconds. This (like the original)
- * is a little better than 1%.
- */
-#define LPS_PREC 8
-
-static void au1000_calibrate_delay(void)
-{
- unsigned long ticks, loopbit;
- int lps_precision = LPS_PREC;
-
- loops_per_jiffy = 1 << 12;
-
- while (loops_per_jiffy <<= 1) {
- /* Wait for "start of" clock tick */
- ticks = jiffies;
- while (ticks == jiffies)
- /* nothing */ ;
- /* Go ... */
- ticks = jiffies;
- __delay(loops_per_jiffy);
- ticks = jiffies - ticks;
- if (ticks)
- break;
- }
-
- /*
- * Do a binary approximation to get loops_per_jiffy set to be equal
- * one clock (up to lps_precision bits)
- */
- loops_per_jiffy >>= 1;
- loopbit = loops_per_jiffy;
- while (lps_precision-- && (loopbit >>= 1)) {
- loops_per_jiffy |= loopbit;
- ticks = jiffies;
- while (ticks == jiffies);
- ticks = jiffies;
- __delay(loops_per_jiffy);
- if (jiffies != ticks) /* longer than 1 tick */
- loops_per_jiffy &= ~loopbit;
- }
-}
#endif /* CONFIG_PM */
diff --git a/arch/mips/alchemy/common/reset.c b/arch/mips/alchemy/common/reset.c
index d555429..0191c93 100644
--- a/arch/mips/alchemy/common/reset.c
+++ b/arch/mips/alchemy/common/reset.c
@@ -31,8 +31,6 @@
#include <asm/mach-au1x00/au1000.h>
-extern int au_sleep(void);
-
void au1000_restart(char *command)
{
/* Set all integrated peripherals to disabled states */
diff --git a/arch/mips/alchemy/common/sleeper.S b/arch/mips/alchemy/common/sleeper.S
index 3006e27..4f4b167 100644
--- a/arch/mips/alchemy/common/sleeper.S
+++ b/arch/mips/alchemy/common/sleeper.S
@@ -15,16 +15,17 @@
#include <asm/regdef.h>
#include <asm/stackframe.h>
+ .extern __flush_cache_all
+
.text
- .set macro
- .set noat
+ .set noreorder
+ .set noat
.align 5
/* Save all of the processor general registers and go to sleep.
* A wakeup condition will get us back here to restore the registers.
*/
-LEAF(save_and_sleep)
-
+LEAF(au1xxx_save_and_sleep)
subu sp, PT_SIZE
sw $1, PT_R1(sp)
sw $2, PT_R2(sp)
@@ -33,14 +34,6 @@ LEAF(save_and_sleep)
sw $5, PT_R5(sp)
sw $6, PT_R6(sp)
sw $7, PT_R7(sp)
- sw $8, PT_R8(sp)
- sw $9, PT_R9(sp)
- sw $10, PT_R10(sp)
- sw $11, PT_R11(sp)
- sw $12, PT_R12(sp)
- sw $13, PT_R13(sp)
- sw $14, PT_R14(sp)
- sw $15, PT_R15(sp)
sw $16, PT_R16(sp)
sw $17, PT_R17(sp)
sw $18, PT_R18(sp)
@@ -49,12 +42,9 @@ LEAF(save_and_sleep)
sw $21, PT_R21(sp)
sw $22, PT_R22(sp)
sw $23, PT_R23(sp)
- sw $24, PT_R24(sp)
- sw $25, PT_R25(sp)
sw $26, PT_R26(sp)
sw $27, PT_R27(sp)
sw $28, PT_R28(sp)
- sw $29, PT_R29(sp)
sw $30, PT_R30(sp)
sw $31, PT_R31(sp)
mfc0 k0, CP0_STATUS
@@ -66,20 +56,26 @@ LEAF(save_and_sleep)
mfc0 k0, CP0_CONFIG
sw k0, 0x14(sp)
+ /* flush caches to make sure context is in memory */
+ la t1, __flush_cache_all
+ lw t0, 0(t1)
+ jalr t0
+ nop
+
/* Now set up the scratch registers so the boot rom will
* return to this point upon wakeup.
+ * sys_scratch0 : SP
+ * sys_scratch1 : RA
*/
- la k0, 1f
- lui k1, 0xb190
- ori k1, 0x18
- sw sp, 0(k1)
- ori k1, 0x1c
- sw k0, 0(k1)
+ lui t3, 0xb190 /* sys_xxx */
+ sw sp, 0x0018(t3)
+ la k0, 3f /* resume path */
+ sw k0, 0x001c(t3)
-/* Put SDRAM into self refresh. Preload instructions into cache,
- * issue a precharge, then auto refresh, then sleep commands to it.
- */
- la t0, sdsleep
+ /* Put SDRAM into self refresh: Preload instructions into cache,
+ * issue a precharge, auto/self refresh, then sleep commands to it.
+ */
+ la t0, 1f
.set mips3
cache 0x14, 0(t0)
cache 0x14, 32(t0)
@@ -87,24 +83,57 @@ LEAF(save_and_sleep)
cache 0x14, 96(t0)
.set mips0
-sdsleep:
- lui k0, 0xb400
- sw zero, 0x001c(k0) /* Precharge */
- sw zero, 0x0020(k0) /* Auto refresh */
- sw zero, 0x0030(k0) /* SDRAM sleep */
+1: lui a0, 0xb400 /* mem_xxx */
+#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100) || \
+ defined(CONFIG_SOC_AU1500)
+ sw zero, 0x001c(a0) /* Precharge */
+ sync
+ sw zero, 0x0020(a0) /* Auto Refresh */
+ sync
+ sw zero, 0x0030(a0) /* Sleep */
+ sync
+#endif
+
+#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+ sw zero, 0x08c0(a0) /* Precharge */
sync
+ sw zero, 0x08d0(a0) /* Self Refresh */
+ sync
+
+ /* wait for sdram to enter self-refresh mode */
+ lui t0, 0x0100
+2: lw t1, 0x0850(a0) /* mem_sdstat */
+ and t2, t1, t0
+ beq t2, zero, 2b
+ nop
- lui k1, 0xb190
- sw zero, 0x0078(k1) /* get ready to sleep */
+ /* disable SDRAM clocks */
+ lui t0, 0xcfff
+ ori t0, t0, 0xffff
+ lw t1, 0x0840(a0) /* mem_sdconfiga */
+ and t1, t0, t1 /* clear CE[1:0] */
+ sw t1, 0x0840(a0) /* mem_sdconfiga */
sync
- sw zero, 0x007c(k1) /* Put processor to sleep */
+#endif
+
+ /* put power supply and processor to sleep */
+ sw zero, 0x0078(t3) /* sys_slppwr */
+ sync
+ sw zero, 0x007c(t3) /* sys_sleep */
sync
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
/* This is where we return upon wakeup.
* Reload all of the registers and return.
*/
-1: nop
- lw k0, 0x20(sp)
+3: lw k0, 0x20(sp)
mtc0 k0, CP0_STATUS
lw k0, 0x1c(sp)
mtc0 k0, CP0_CONTEXT
@@ -113,10 +142,11 @@ sdsleep:
lw k0, 0x14(sp)
mtc0 k0, CP0_CONFIG
- /* We need to catch the ealry Alchemy SOCs with
+ /* We need to catch the early Alchemy SOCs with
* the write-only Config[OD] bit and set it back to one...
*/
jal au1x00_fixup_config_od
+ nop
lw $1, PT_R1(sp)
lw $2, PT_R2(sp)
lw $3, PT_R3(sp)
@@ -124,14 +154,6 @@ sdsleep:
lw $5, PT_R5(sp)
lw $6, PT_R6(sp)
lw $7, PT_R7(sp)
- lw $8, PT_R8(sp)
- lw $9, PT_R9(sp)
- lw $10, PT_R10(sp)
- lw $11, PT_R11(sp)
- lw $12, PT_R12(sp)
- lw $13, PT_R13(sp)
- lw $14, PT_R14(sp)
- lw $15, PT_R15(sp)
lw $16, PT_R16(sp)
lw $17, PT_R17(sp)
lw $18, PT_R18(sp)
@@ -140,15 +162,11 @@ sdsleep:
lw $21, PT_R21(sp)
lw $22, PT_R22(sp)
lw $23, PT_R23(sp)
- lw $24, PT_R24(sp)
- lw $25, PT_R25(sp)
lw $26, PT_R26(sp)
lw $27, PT_R27(sp)
lw $28, PT_R28(sp)
- lw $29, PT_R29(sp)
lw $30, PT_R30(sp)
lw $31, PT_R31(sp)
- addiu sp, PT_SIZE
-
jr ra
-END(save_and_sleep)
+ addiu sp, PT_SIZE
+END(au1xxx_save_and_sleep)
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index 2b88c29..515373c 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -137,6 +137,12 @@ extern void set_au1x00_uart_baud_base(unsigned long new_baud_base);
extern unsigned long get_au1x00_uart_baud_base(void);
extern unsigned long au1xxx_calc_clock(void);
+/* PM: arch/mips/alchemy/common/sleeper.S, power.c, irq.c */
+void au1xxx_save_and_sleep(void);
+void au_sleep(void);
+void save_au1xxx_intctl(void);
+void restore_au1xxx_intctl(void);
+
/*
* Every board describes its IRQ mapping with this table.
*/
OpenPOWER on IntegriCloud