diff options
Diffstat (limited to 'arch/mips')
38 files changed, 409 insertions, 84 deletions
diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 75a36ad..ca8f834 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -288,9 +288,6 @@ endif vmlinux.32: vmlinux $(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@ - -#obj-$(CONFIG_KPROBES) += kprobes.o - # # The 64-bit ELF tools are pretty broken so at this time we generate 64-bit # ELF files from 32-bit files by conversion. diff --git a/arch/mips/alchemy/board-mtx1.c b/arch/mips/alchemy/board-mtx1.c index 4a9baa9..9969dba 100644 --- a/arch/mips/alchemy/board-mtx1.c +++ b/arch/mips/alchemy/board-mtx1.c @@ -276,7 +276,7 @@ static struct platform_device mtx1_pci_host = { .resource = alchemy_pci_host_res, }; -static struct __initdata platform_device * mtx1_devs[] = { +static struct platform_device *mtx1_devs[] __initdata = { &mtx1_pci_host, &mtx1_gpio_leds, &mtx1_wdt, diff --git a/arch/mips/alchemy/common/usb.c b/arch/mips/alchemy/common/usb.c index fcc6956..2adc7ed 100644 --- a/arch/mips/alchemy/common/usb.c +++ b/arch/mips/alchemy/common/usb.c @@ -14,6 +14,7 @@ #include <linux/module.h> #include <linux/spinlock.h> #include <linux/syscore_ops.h> +#include <asm/cpu.h> #include <asm/mach-au1x00/au1000.h> /* control register offsets */ @@ -358,7 +359,7 @@ static inline int au1200_coherency_bug(void) { #if defined(CONFIG_DMA_COHERENT) /* Au1200 AB USB does not support coherent memory */ - if (!(read_c0_prid() & 0xff)) { + if (!(read_c0_prid() & PRID_REV_MASK)) { printk(KERN_INFO "Au1200 USB: this is chip revision AB !!\n"); printk(KERN_INFO "Au1200 USB: update your board or re-configure" " the kernel\n"); diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c index 7e17374..b713cd6 100644 --- a/arch/mips/bcm63xx/cpu.c +++ b/arch/mips/bcm63xx/cpu.c @@ -306,14 +306,14 @@ void __init bcm63xx_cpu_init(void) switch (c->cputype) { case CPU_BMIPS3300: - if ((read_c0_prid() & 0xff00) != PRID_IMP_BMIPS3300_ALT) + if ((read_c0_prid() & PRID_IMP_MASK) != PRID_IMP_BMIPS3300_ALT) __cpu_name[cpu] = "Broadcom BCM6338"; /* fall-through */ case CPU_BMIPS32: chipid_reg = BCM_6345_PERF_BASE; break; case CPU_BMIPS4350: - switch ((read_c0_prid() & 0xff)) { + switch ((read_c0_prid() & PRID_REV_MASK)) { case 0x04: chipid_reg = BCM_3368_PERF_BASE; break; diff --git a/arch/mips/boot/dts/include/dt-bindings b/arch/mips/boot/dts/include/dt-bindings index 68ae388..08c00e4 120000 --- a/arch/mips/boot/dts/include/dt-bindings +++ b/arch/mips/boot/dts/include/dt-bindings @@ -1 +1 @@ -../../../../../include/dt-bindings +../../../../../include/dt-bindings
\ No newline at end of file diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c index 0219395..b752c4e 100644 --- a/arch/mips/cavium-octeon/csrc-octeon.c +++ b/arch/mips/cavium-octeon/csrc-octeon.c @@ -12,6 +12,7 @@ #include <linux/smp.h> #include <asm/cpu-info.h> +#include <asm/cpu-type.h> #include <asm/time.h> #include <asm/octeon/octeon.h> diff --git a/arch/mips/dec/prom/init.c b/arch/mips/dec/prom/init.c index ab16904..468f665 100644 --- a/arch/mips/dec/prom/init.c +++ b/arch/mips/dec/prom/init.c @@ -13,6 +13,7 @@ #include <asm/bootinfo.h> #include <asm/cpu.h> +#include <asm/cpu-type.h> #include <asm/processor.h> #include <asm/dec/prom.h> diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h index fa44f3e..d445d06 100644 --- a/arch/mips/include/asm/cpu-features.h +++ b/arch/mips/include/asm/cpu-features.h @@ -13,12 +13,6 @@ #include <asm/cpu-info.h> #include <cpu-feature-overrides.h> -#ifndef current_cpu_type -#define current_cpu_type() current_cpu_data.cputype -#endif - -#define boot_cpu_type() cpu_data[0].cputype - /* * SMP assumption: Options of CPU 0 are a superset of all processors. * This is true for all known MIPS systems. @@ -193,7 +187,7 @@ /* * MIPS32, MIPS64, VR5500, IDT32332, IDT32334 and maybe a few other - * pre-MIPS32/MIPS53 processors have CLO, CLZ. The IDT RC64574 is 64-bit and + * pre-MIPS32/MIPS64 processors have CLO, CLZ. The IDT RC64574 is 64-bit and * has CLO and CLZ but not DCLO nor DCLZ. For 64-bit kernels * cpu_has_clo_clz also indicates the availability of DCLO and DCLZ. */ diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h index 41401d8..21c8e29 100644 --- a/arch/mips/include/asm/cpu-info.h +++ b/arch/mips/include/asm/cpu-info.h @@ -84,6 +84,7 @@ struct cpuinfo_mips { extern struct cpuinfo_mips cpu_data[]; #define current_cpu_data cpu_data[smp_processor_id()] #define raw_current_cpu_data cpu_data[raw_smp_processor_id()] +#define boot_cpu_data cpu_data[0] extern void cpu_probe(void); extern void cpu_report(void); diff --git a/arch/mips/include/asm/cpu-type.h b/arch/mips/include/asm/cpu-type.h new file mode 100644 index 0000000..4a402cc --- /dev/null +++ b/arch/mips/include/asm/cpu-type.h @@ -0,0 +1,203 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 2004 Ralf Baechle + * Copyright (C) 2004 Maciej W. Rozycki + */ +#ifndef __ASM_CPU_TYPE_H +#define __ASM_CPU_TYPE_H + +#include <linux/smp.h> +#include <linux/compiler.h> + +static inline int __pure __get_cpu_type(const int cpu_type) +{ + switch (cpu_type) { +#if defined(CONFIG_SYS_HAS_CPU_LOONGSON2E) || \ + defined(CONFIG_SYS_HAS_CPU_LOONGSON2F) + case CPU_LOONGSON2: +#endif + +#ifdef CONFIG_SYS_HAS_CPU_LOONGSON1B + case CPU_LOONGSON1: +#endif + +#ifdef CONFIG_SYS_HAS_CPU_MIPS32_R1 + case CPU_4KC: + case CPU_ALCHEMY: + case CPU_BMIPS3300: + case CPU_BMIPS4350: + case CPU_PR4450: + case CPU_BMIPS32: + case CPU_JZRISC: +#endif + +#if defined(CONFIG_SYS_HAS_CPU_MIPS32_R1) || \ + defined(CONFIG_SYS_HAS_CPU_MIPS32_R2) + case CPU_4KEC: +#endif + +#ifdef CONFIG_SYS_HAS_CPU_MIPS32_R2 + case CPU_4KSC: + case CPU_24K: + case CPU_34K: + case CPU_1004K: + case CPU_74K: + case CPU_M14KC: + case CPU_M14KEC: +#endif + +#ifdef CONFIG_SYS_HAS_CPU_MIPS64_R1 + case CPU_5KC: + case CPU_5KE: + case CPU_20KC: + case CPU_25KF: + case CPU_SB1: + case CPU_SB1A: +#endif + +#ifdef CONFIG_SYS_HAS_CPU_MIPS64_R2 + /* + * All MIPS64 R2 processors have their own special symbols. That is, + * there currently is no pure R2 core + */ +#endif + +#ifdef CONFIG_SYS_HAS_CPU_R3000 + case CPU_R2000: + case CPU_R3000: + case CPU_R3000A: + case CPU_R3041: + case CPU_R3051: + case CPU_R3052: + case CPU_R3081: + case CPU_R3081E: +#endif + +#ifdef CONFIG_SYS_HAS_CPU_TX39XX + case CPU_TX3912: + case CPU_TX3922: + case CPU_TX3927: +#endif + +#ifdef CONFIG_SYS_HAS_CPU_VR41XX + case CPU_VR41XX: + case CPU_VR4111: + case CPU_VR4121: + case CPU_VR4122: + case CPU_VR4131: + case CPU_VR4133: + case CPU_VR4181: + case CPU_VR4181A: +#endif + +#ifdef CONFIG_SYS_HAS_CPU_R4300 + case CPU_R4300: + case CPU_R4310: +#endif + +#ifdef CONFIG_SYS_HAS_CPU_R4X00 + case CPU_R4000PC: + case CPU_R4000SC: + case CPU_R4000MC: + case CPU_R4200: + case CPU_R4400PC: + case CPU_R4400SC: + case CPU_R4400MC: + case CPU_R4600: + case CPU_R4700: + case CPU_R4640: + case CPU_R4650: +#endif + +#ifdef CONFIG_SYS_HAS_CPU_TX49XX + case CPU_TX49XX: +#endif + +#ifdef CONFIG_SYS_HAS_CPU_R5000 + case CPU_R5000: +#endif + +#ifdef CONFIG_SYS_HAS_CPU_R5432 + case CPU_R5432: +#endif + +#ifdef CONFIG_SYS_HAS_CPU_R5500 + case CPU_R5500: +#endif + +#ifdef CONFIG_SYS_HAS_CPU_R6000 + case CPU_R6000: + case CPU_R6000A: +#endif + +#ifdef CONFIG_SYS_HAS_CPU_NEVADA + case CPU_NEVADA: +#endif + +#ifdef CONFIG_SYS_HAS_CPU_R8000 + case CPU_R8000: +#endif + +#ifdef CONFIG_SYS_HAS_CPU_R10000 + case CPU_R10000: + case CPU_R12000: + case CPU_R14000: +#endif +#ifdef CONFIG_SYS_HAS_CPU_RM7000 + case CPU_RM7000: + case CPU_SR71000: +#endif +#ifdef CONFIG_SYS_HAS_CPU_RM9000 + case CPU_RM9000: +#endif +#ifdef CONFIG_SYS_HAS_CPU_SB1 + case CPU_SB1: + case CPU_SB1A: +#endif +#ifdef CONFIG_SYS_HAS_CPU_CAVIUM_OCTEON + case CPU_CAVIUM_OCTEON: + case CPU_CAVIUM_OCTEON_PLUS: + case CPU_CAVIUM_OCTEON2: +#endif + +#ifdef CONFIG_SYS_HAS_CPU_BMIPS4380 + case CPU_BMIPS4380: +#endif + +#ifdef CONFIG_SYS_HAS_CPU_BMIPS5000 + case CPU_BMIPS5000: +#endif + +#ifdef CONFIG_SYS_HAS_CPU_XLP + case CPU_XLP: +#endif + +#ifdef CONFIG_SYS_HAS_CPU_XLR + case CPU_XLR: +#endif + break; + default: + unreachable(); + } + + return cpu_type; +} + +static inline int __pure current_cpu_type(void) +{ + const int cpu_type = current_cpu_data.cputype; + + return __get_cpu_type(cpu_type); +} + +static inline int __pure boot_cpu_type(void) +{ + const int cpu_type = cpu_data[0].cputype; + + return __get_cpu_type(cpu_type); +} + +#endif /* __ASM_CPU_TYPE_H */ diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h index 71b9f19..d2035e1 100644 --- a/arch/mips/include/asm/cpu.h +++ b/arch/mips/include/asm/cpu.h @@ -3,15 +3,14 @@ * various MIPS cpu types. * * Copyright (C) 1996 David S. Miller (davem@davemloft.net) - * Copyright (C) 2004 Maciej W. Rozycki + * Copyright (C) 2004, 2013 Maciej W. Rozycki */ #ifndef _ASM_CPU_H #define _ASM_CPU_H -/* Assigned Company values for bits 23:16 of the PRId Register - (CP0 register 15, select 0). As of the MIPS32 and MIPS64 specs from - MTI, the PRId register is defined in this (backwards compatible) - way: +/* + As of the MIPS32 and MIPS64 specs from MTI, the PRId register (CP0 + register 15, select 0) is defined in this (backwards compatible) way: +----------------+----------------+----------------+----------------+ | Company Options| Company ID | Processor ID | Revision | @@ -23,6 +22,14 @@ spec. */ +#define PRID_OPT_MASK 0xff000000 + +/* + * Assigned Company values for bits 23:16 of the PRId register. + */ + +#define PRID_COMP_MASK 0xff0000 + #define PRID_COMP_LEGACY 0x000000 #define PRID_COMP_MIPS 0x010000 #define PRID_COMP_BROADCOM 0x020000 @@ -38,10 +45,17 @@ #define PRID_COMP_INGENIC 0xd00000 /* - * Assigned values for the product ID register. In order to detect a - * certain CPU type exactly eventually additional registers may need to - * be examined. These are valid when 23:16 == PRID_COMP_LEGACY + * Assigned Processor ID (implementation) values for bits 15:8 of the PRId + * register. In order to detect a certain CPU type exactly eventually + * additional registers may need to be examined. */ + +#define PRID_IMP_MASK 0xff00 + +/* + * These are valid when 23:16 == PRID_COMP_LEGACY + */ + #define PRID_IMP_R2000 0x0100 #define PRID_IMP_AU1_REV1 0x0100 #define PRID_IMP_AU1_REV2 0x0200 @@ -182,11 +196,15 @@ #define PRID_IMP_NETLOGIC_XLP2XX 0x1200 /* - * Definitions for 7:0 on legacy processors + * Particular Revision values for bits 7:0 of the PRId register. */ #define PRID_REV_MASK 0x00ff +/* + * Definitions for 7:0 on legacy processors + */ + #define PRID_REV_TX4927 0x0022 #define PRID_REV_TX4937 0x0030 #define PRID_REV_R4400 0x0040 @@ -227,6 +245,8 @@ * 31 16 15 8 7 0 */ +#define FPIR_IMP_MASK 0xff00 + #define FPIR_IMP_NONE 0x0000 enum cpu_type_enum { diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h index 3e11a46..54f9e84 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000.h +++ b/arch/mips/include/asm/mach-au1x00/au1000.h @@ -43,6 +43,8 @@ #include <linux/io.h> #include <linux/irq.h> +#include <asm/cpu.h> + /* cpu pipeline flush */ void static inline au_sync(void) { @@ -140,7 +142,7 @@ static inline int au1xxx_cpu_needs_config_od(void) static inline int alchemy_get_cputype(void) { - switch (read_c0_prid() & 0xffff0000) { + switch (read_c0_prid() & (PRID_OPT_MASK | PRID_COMP_MASK)) { case 0x00030000: return ALCHEMY_CPU_AU1000; break; diff --git a/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h index f4caacd..1bcb642 100644 --- a/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h @@ -8,6 +8,8 @@ #ifndef __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H #define __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H +#include <asm/cpu.h> + /* * IP22 with a variety of processors so we can't use defaults for everything. */ diff --git a/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h index 1d2b6ff..d6111aa 100644 --- a/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h @@ -8,6 +8,8 @@ #ifndef __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H #define __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H +#include <asm/cpu.h> + /* * IP27 only comes with R10000 family processors all using the same config */ diff --git a/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h index 65e9c85..4cec06d 100644 --- a/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h @@ -9,6 +9,8 @@ #ifndef __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H #define __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H +#include <asm/cpu.h> + /* * IP28 only comes with R10000 family processors all using the same config */ diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index fed1c3e..e033141 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -603,6 +603,13 @@ #define MIPS_CONF4_MMUEXTDEF (_ULCAST_(3) << 14) #define MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT (_ULCAST_(1) << 14) +#define MIPS_CONF5_NF (_ULCAST_(1) << 0) +#define MIPS_CONF5_UFR (_ULCAST_(1) << 2) +#define MIPS_CONF5_MSAEN (_ULCAST_(1) << 27) +#define MIPS_CONF5_EVA (_ULCAST_(1) << 28) +#define MIPS_CONF5_CV (_ULCAST_(1) << 29) +#define MIPS_CONF5_K (_ULCAST_(1) << 30) + #define MIPS_CONF6_SYND (_ULCAST_(1) << 13) #define MIPS_CONF7_WII (_ULCAST_(1) << 31) diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h index f194c08..12d6842 100644 --- a/arch/mips/include/asm/pci.h +++ b/arch/mips/include/asm/pci.h @@ -83,6 +83,18 @@ static inline void pcibios_penalize_isa_irq(int irq, int active) extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine); +#define HAVE_ARCH_PCI_RESOURCE_TO_USER + +static inline void pci_resource_to_user(const struct pci_dev *dev, int bar, + const struct resource *rsrc, resource_size_t *start, + resource_size_t *end) +{ + phys_t size = resource_size(rsrc); + + *start = fixup_bigphys_addr(rsrc->start, size); + *end = rsrc->start + size; +} + /* * Dynamic DMA mapping stuff. * MIPS has everything mapped statically. diff --git a/arch/mips/include/asm/timex.h b/arch/mips/include/asm/timex.h index 6529704..c542475 100644 --- a/arch/mips/include/asm/timex.h +++ b/arch/mips/include/asm/timex.h @@ -10,7 +10,9 @@ #ifdef __KERNEL__ +#include <asm/cpu-features.h> #include <asm/mipsregs.h> +#include <asm/cpu-type.h> /* * This is the clock rate of the i8253 PIT. A MIPS system may not have @@ -33,9 +35,38 @@ typedef unsigned int cycles_t; +/* + * On R4000/R4400 before version 5.0 an erratum exists such that if the + * cycle counter is read in the exact moment that it is matching the + * compare register, no interrupt will be generated. + * + * There is a suggested workaround and also the erratum can't strike if + * the compare interrupt isn't being used as the clock source device. + * However for now the implementaton of this function doesn't get these + * fine details right. + */ static inline cycles_t get_cycles(void) { - return 0; + switch (boot_cpu_type()) { + case CPU_R4400PC: + case CPU_R4400SC: + case CPU_R4400MC: + if ((read_c0_prid() & 0xff) >= 0x0050) + return read_c0_count(); + break; + + case CPU_R4000PC: + case CPU_R4000SC: + case CPU_R4000MC: + break; + + default: + if (cpu_has_counter) + return read_c0_count(); + break; + } + + return 0; /* no usable counter */ } #endif /* __KERNEL__ */ diff --git a/arch/mips/include/asm/vga.h b/arch/mips/include/asm/vga.h index f4cff7e..f82c837 100644 --- a/arch/mips/include/asm/vga.h +++ b/arch/mips/include/asm/vga.h @@ -6,6 +6,7 @@ #ifndef _ASM_VGA_H #define _ASM_VGA_H +#include <asm/addrspace.h> #include <asm/byteorder.h> /* @@ -13,7 +14,7 @@ * access the videoram directly without any black magic. */ -#define VGA_MAP_MEM(x, s) (0xb0000000L + (unsigned long)(x)) +#define VGA_MAP_MEM(x, s) CKSEG1ADDR(0x10000000L + (unsigned long)(x)) #define vga_readb(x) (*(x)) #define vga_writeb(x, y) (*(y) = (x)) diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 37663c7..5465dc1 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -20,6 +20,7 @@ #include <asm/bugs.h> #include <asm/cpu.h> +#include <asm/cpu-type.h> #include <asm/fpu.h> #include <asm/mipsregs.h> #include <asm/watch.h> @@ -55,7 +56,7 @@ static inline void check_errata(void) { struct cpuinfo_mips *c = ¤t_cpu_data; - switch (c->cputype) { + switch (current_cpu_type()) { case CPU_34K: /* * Erratum "RPS May Cause Incorrect Instruction Execution" @@ -122,7 +123,7 @@ static inline unsigned long cpu_get_fpu_id(void) */ static inline int __cpu_has_fpu(void) { - return ((cpu_get_fpu_id() & 0xff00) != FPIR_IMP_NONE); + return ((cpu_get_fpu_id() & FPIR_IMP_MASK) != FPIR_IMP_NONE); } static inline void cpu_probe_vmbits(struct cpuinfo_mips *c) @@ -290,6 +291,17 @@ static inline unsigned int decode_config4(struct cpuinfo_mips *c) return config4 & MIPS_CONF_M; } +static inline unsigned int decode_config5(struct cpuinfo_mips *c) +{ + unsigned int config5; + + config5 = read_c0_config5(); + config5 &= ~MIPS_CONF5_UFR; + write_c0_config5(config5); + + return config5 & MIPS_CONF_M; +} + static void decode_configs(struct cpuinfo_mips *c) { int ok; @@ -310,6 +322,8 @@ static void decode_configs(struct cpuinfo_mips *c) ok = decode_config3(c); if (ok) ok = decode_config4(c); + if (ok) + ok = decode_config5(c); mips_probe_watch_registers(c); @@ -322,7 +336,7 @@ static void decode_configs(struct cpuinfo_mips *c) static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) { - switch (c->processor_id & 0xff00) { + switch (c->processor_id & PRID_IMP_MASK) { case PRID_IMP_R2000: c->cputype = CPU_R2000; __cpu_name[cpu] = "R2000"; @@ -333,7 +347,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) c->tlbsize = 64; break; case PRID_IMP_R3000: - if ((c->processor_id & 0xff) == PRID_REV_R3000A) { + if ((c->processor_id & PRID_REV_MASK) == PRID_REV_R3000A) { if (cpu_has_confreg()) { c->cputype = CPU_R3081E; __cpu_name[cpu] = "R3081"; @@ -353,7 +367,8 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) break; case PRID_IMP_R4000: if (read_c0_config() & CONF_SC) { - if ((c->processor_id & 0xff) >= PRID_REV_R4400) { + if ((c->processor_id & PRID_REV_MASK) >= + PRID_REV_R4400) { c->cputype = CPU_R4400PC; __cpu_name[cpu] = "R4400PC"; } else { @@ -361,7 +376,8 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) __cpu_name[cpu] = "R4000PC"; } } else { - if ((c->processor_id & 0xff) >= PRID_REV_R4400) { + if ((c->processor_id & PRID_REV_MASK) >= + PRID_REV_R4400) { c->cputype = CPU_R4400SC; __cpu_name[cpu] = "R4400SC"; } else { @@ -454,7 +470,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) __cpu_name[cpu] = "TX3927"; c->tlbsize = 64; } else { - switch (c->processor_id & 0xff) { + switch (c->processor_id & PRID_REV_MASK) { case PRID_REV_TX3912: c->cputype = CPU_TX3912; __cpu_name[cpu] = "TX3912"; @@ -640,7 +656,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu) { decode_configs(c); - switch (c->processor_id & 0xff00) { + switch (c->processor_id & PRID_IMP_MASK) { case PRID_IMP_4KC: c->cputype = CPU_4KC; __cpu_name[cpu] = "MIPS 4Kc"; @@ -711,7 +727,7 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu) static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu) { decode_configs(c); - switch (c->processor_id & 0xff00) { + switch (c->processor_id & PRID_IMP_MASK) { case PRID_IMP_AU1_REV1: case PRID_IMP_AU1_REV2: c->cputype = CPU_ALCHEMY; @@ -730,7 +746,7 @@ static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu) break; case 4: __cpu_name[cpu] = "Au1200"; - if ((c->processor_id & 0xff) == 2) + if ((c->processor_id & PRID_REV_MASK) == 2) __cpu_name[cpu] = "Au1250"; break; case 5: @@ -748,12 +764,12 @@ static inline void cpu_probe_sibyte(struct cpuinfo_mips *c, unsigned int cpu) { decode_configs(c); - switch (c->processor_id & 0xff00) { + switch (c->processor_id & PRID_IMP_MASK) { case PRID_IMP_SB1: c->cputype = CPU_SB1; __cpu_name[cpu] = "SiByte SB1"; /* FPU in pass1 is known to have issues. */ - if ((c->processor_id & 0xff) < 0x02) + if ((c->processor_id & PRID_REV_MASK) < 0x02) c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR); break; case PRID_IMP_SB1A: @@ -766,7 +782,7 @@ static inline void cpu_probe_sibyte(struct cpuinfo_mips *c, unsigned int cpu) static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c, unsigned int cpu) { decode_configs(c); - switch (c->processor_id & 0xff00) { + switch (c->processor_id & PRID_IMP_MASK) { case PRID_IMP_SR71000: c->cputype = CPU_SR71000; __cpu_name[cpu] = "Sandcraft SR71000"; @@ -779,7 +795,7 @@ static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c, unsigned int cpu) static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu) { decode_configs(c); - switch (c->processor_id & 0xff00) { + switch (c->processor_id & PRID_IMP_MASK) { case PRID_IMP_PR4450: c->cputype = CPU_PR4450; __cpu_name[cpu] = "Philips PR4450"; @@ -791,7 +807,7 @@ static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu) static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu) { decode_configs(c); - switch (c->processor_id & 0xff00) { + switch (c->processor_id & PRID_IMP_MASK) { case PRID_IMP_BMIPS32_REV4: case PRID_IMP_BMIPS32_REV8: c->cputype = CPU_BMIPS32; @@ -806,7 +822,7 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu) set_elf_platform(cpu, "bmips3300"); break; case PRID_IMP_BMIPS43XX: { - int rev = c->processor_id & 0xff; + int rev = c->processor_id & PRID_REV_MASK; if (rev >= PRID_REV_BMIPS4380_LO && rev <= PRID_REV_BMIPS4380_HI) { @@ -832,7 +848,7 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu) static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu) { decode_configs(c); - switch (c->processor_id & 0xff00) { + switch (c->processor_id & PRID_IMP_MASK) { case PRID_IMP_CAVIUM_CN38XX: case PRID_IMP_CAVIUM_CN31XX: case PRID_IMP_CAVIUM_CN30XX: @@ -875,7 +891,7 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu) decode_configs(c); /* JZRISC does not implement the CP0 counter. */ c->options &= ~MIPS_CPU_COUNTER; - switch (c->processor_id & 0xff00) { + switch (c->processor_id & PRID_IMP_MASK) { case PRID_IMP_JZRISC: c->cputype = CPU_JZRISC; __cpu_name[cpu] = "Ingenic JZRISC"; @@ -890,7 +906,7 @@ static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu) { decode_configs(c); - if ((c->processor_id & 0xff00) == PRID_IMP_NETLOGIC_AU13XX) { + if ((c->processor_id & PRID_IMP_MASK) == PRID_IMP_NETLOGIC_AU13XX) { c->cputype = CPU_ALCHEMY; __cpu_name[cpu] = "Au1300"; /* following stuff is not for Alchemy */ @@ -905,7 +921,7 @@ static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu) MIPS_CPU_EJTAG | MIPS_CPU_LLSC); - switch (c->processor_id & 0xff00) { + switch (c->processor_id & PRID_IMP_MASK) { case PRID_IMP_NETLOGIC_XLP2XX: c->cputype = CPU_XLP; __cpu_name[cpu] = "Broadcom XLPII"; @@ -984,7 +1000,7 @@ void cpu_probe(void) c->cputype = CPU_UNKNOWN; c->processor_id = read_c0_prid(); - switch (c->processor_id & 0xff0000) { + switch (c->processor_id & PRID_COMP_MASK) { case PRID_COMP_LEGACY: cpu_probe_legacy(c, cpu); break; diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index 42f8875..f7991d9 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -18,6 +18,7 @@ #include <linux/sched.h> #include <asm/cpu.h> #include <asm/cpu-info.h> +#include <asm/cpu-type.h> #include <asm/idle.h> #include <asm/mipsregs.h> @@ -136,7 +137,7 @@ void __init check_wait(void) return; } - switch (c->cputype) { + switch (current_cpu_type()) { case CPU_R3081: case CPU_R3081E: cpu_wait = r3081_wait; diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index 364d26a..dcb8e5d 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -24,6 +24,7 @@ #include <linux/export.h> #include <asm/cpu-features.h> +#include <asm/cpu-type.h> #include <asm/div64.h> #include <asm/smtc_ipi.h> #include <asm/time.h> diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index aec3408..524841f 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -39,6 +39,7 @@ #include <asm/break.h> #include <asm/cop2.h> #include <asm/cpu.h> +#include <asm/cpu-type.h> #include <asm/dsp.h> #include <asm/fpu.h> #include <asm/fpu_emulator.h> @@ -622,7 +623,7 @@ static int simulate_rdhwr(struct pt_regs *regs, int rd, int rt) regs->regs[rt] = read_c0_count(); return 0; case 3: /* Count register resolution */ - switch (current_cpu_data.cputype) { + switch (current_cpu_type()) { case CPU_20KC: case CPU_25KF: regs->regs[rt] = 1; diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c index 729e770..c8efdb5 100644 --- a/arch/mips/mm/c-octeon.c +++ b/arch/mips/mm/c-octeon.c @@ -19,6 +19,7 @@ #include <asm/bootinfo.h> #include <asm/cacheops.h> #include <asm/cpu-features.h> +#include <asm/cpu-type.h> #include <asm/page.h> #include <asm/pgtable.h> #include <asm/r4kcache.h> @@ -186,9 +187,10 @@ static void probe_octeon(void) unsigned long dcache_size; unsigned int config1; struct cpuinfo_mips *c = ¤t_cpu_data; + int cputype = current_cpu_type(); config1 = read_c0_config1(); - switch (c->cputype) { + switch (cputype) { case CPU_CAVIUM_OCTEON: case CPU_CAVIUM_OCTEON_PLUS: c->icache.linesz = 2 << ((config1 >> 19) & 7); @@ -199,7 +201,7 @@ static void probe_octeon(void) c->icache.sets * c->icache.ways * c->icache.linesz; c->icache.waybit = ffs(icache_size / c->icache.ways) - 1; c->dcache.linesz = 128; - if (c->cputype == CPU_CAVIUM_OCTEON_PLUS) + if (cputype == CPU_CAVIUM_OCTEON_PLUS) c->dcache.sets = 2; /* CN5XXX has two Dcache sets */ else c->dcache.sets = 1; /* CN3XXX has one Dcache set */ diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index f749f68..bc6f96f 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -12,6 +12,7 @@ #include <linux/highmem.h> #include <linux/kernel.h> #include <linux/linkage.h> +#include <linux/preempt.h> #include <linux/sched.h> #include <linux/smp.h> #include <linux/mm.h> @@ -24,6 +25,7 @@ #include <asm/cacheops.h> #include <asm/cpu.h> #include <asm/cpu-features.h> +#include <asm/cpu-type.h> #include <asm/io.h> #include <asm/page.h> #include <asm/pgtable.h> @@ -601,11 +603,13 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size) /* Catch bad driver code */ BUG_ON(size == 0); + preempt_disable(); if (cpu_has_inclusive_pcaches) { if (size >= scache_size) r4k_blast_scache(); else blast_scache_range(addr, addr + size); + preempt_enable(); __sync(); return; } @@ -621,6 +625,7 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size) R4600_HIT_CACHEOP_WAR_IMPL; blast_dcache_range(addr, addr + size); } + preempt_enable(); bc_wback_inv(addr, size); __sync(); @@ -631,6 +636,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size) /* Catch bad driver code */ BUG_ON(size == 0); + preempt_disable(); if (cpu_has_inclusive_pcaches) { if (size >= scache_size) r4k_blast_scache(); @@ -645,6 +651,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size) */ blast_inv_scache_range(addr, addr + size); } + preempt_enable(); __sync(); return; } @@ -655,6 +662,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size) R4600_HIT_CACHEOP_WAR_IMPL; blast_inv_dcache_range(addr, addr + size); } + preempt_enable(); bc_inv(addr, size); __sync(); @@ -780,20 +788,30 @@ static inline void rm7k_erratum31(void) static inline void alias_74k_erratum(struct cpuinfo_mips *c) { + unsigned int imp = c->processor_id & PRID_IMP_MASK; + unsigned int rev = c->processor_id & PRID_REV_MASK; + /* * Early versions of the 74K do not update the cache tags on a * vtag miss/ptag hit which can occur in the case of KSEG0/KUSEG * aliases. In this case it is better to treat the cache as always * having aliases. */ - if ((c->processor_id & 0xff) <= PRID_REV_ENCODE_332(2, 4, 0)) - c->dcache.flags |= MIPS_CACHE_VTAG; - if ((c->processor_id & 0xff) == PRID_REV_ENCODE_332(2, 4, 0)) - write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND); - if (((c->processor_id & 0xff00) == PRID_IMP_1074K) && - ((c->processor_id & 0xff) <= PRID_REV_ENCODE_332(1, 1, 0))) { - c->dcache.flags |= MIPS_CACHE_VTAG; - write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND); + switch (imp) { + case PRID_IMP_74K: + if (rev <= PRID_REV_ENCODE_332(2, 4, 0)) + c->dcache.flags |= MIPS_CACHE_VTAG; + if (rev == PRID_REV_ENCODE_332(2, 4, 0)) + write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND); + break; + case PRID_IMP_1074K: + if (rev <= PRID_REV_ENCODE_332(1, 1, 0)) { + c->dcache.flags |= MIPS_CACHE_VTAG; + write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND); + } + break; + default: + BUG(); } } @@ -809,7 +827,7 @@ static void probe_pcache(void) unsigned long config1; unsigned int lsize; - switch (c->cputype) { + switch (current_cpu_type()) { case CPU_R4600: /* QED style two way caches? */ case CPU_R4700: case CPU_R5000: @@ -1025,7 +1043,8 @@ static void probe_pcache(void) * presumably no vendor is shipping his hardware in the "bad" * configuration. */ - if ((prid & 0xff00) == PRID_IMP_R4000 && (prid & 0xff) < 0x40 && + if ((prid & PRID_IMP_MASK) == PRID_IMP_R4000 && + (prid & PRID_REV_MASK) < PRID_REV_R4400 && !(config & CONF_SC) && c->icache.linesz != 16 && PAGE_SIZE <= 0x8000) panic("Improper R4000SC processor configuration detected"); @@ -1045,7 +1064,7 @@ static void probe_pcache(void) * normally they'd suffer from aliases but magic in the hardware deals * with that for us so we don't need to take care ourselves. */ - switch (c->cputype) { + switch (current_cpu_type()) { case CPU_20KC: case CPU_25KF: case CPU_SB1: @@ -1065,7 +1084,7 @@ static void probe_pcache(void) case CPU_34K: case CPU_74K: case CPU_1004K: - if (c->cputype == CPU_74K) + if (current_cpu_type() == CPU_74K) alias_74k_erratum(c); if ((read_c0_config7() & (1 << 16))) { /* effectively physically indexed dcache, @@ -1078,7 +1097,7 @@ static void probe_pcache(void) c->dcache.flags |= MIPS_CACHE_ALIASES; } - switch (c->cputype) { + switch (current_cpu_type()) { case CPU_20KC: /* * Some older 20Kc chips doesn't have the 'VI' bit in @@ -1207,7 +1226,7 @@ static void setup_scache(void) * processors don't have a S-cache that would be relevant to the * Linux memory management. */ - switch (c->cputype) { + switch (current_cpu_type()) { case CPU_R4000SC: case CPU_R4000MC: case CPU_R4400SC: @@ -1384,9 +1403,8 @@ static void r4k_cache_error_setup(void) { extern char __weak except_vec2_generic; extern char __weak except_vec2_sb1; - struct cpuinfo_mips *c = ¤t_cpu_data; - switch (c->cputype) { + switch (current_cpu_type()) { case CPU_SB1: case CPU_SB1A: set_uncached_handler(0x100, &except_vec2_sb1, 0x80); diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c index 664e5236..5f8b955 100644 --- a/arch/mips/mm/dma-default.c +++ b/arch/mips/mm/dma-default.c @@ -18,6 +18,7 @@ #include <linux/highmem.h> #include <asm/cache.h> +#include <asm/cpu-type.h> #include <asm/io.h> #include <dma-coherence.h> @@ -307,12 +308,10 @@ static void mips_dma_sync_sg_for_cpu(struct device *dev, { int i; - /* Make sure that gcc doesn't leave the empty loop body. */ - for (i = 0; i < nelems; i++, sg++) { - if (cpu_needs_post_dma_flush(dev)) + if (cpu_needs_post_dma_flush(dev)) + for (i = 0; i < nelems; i++, sg++) __dma_sync(sg_page(sg), sg->offset, sg->length, direction); - } } static void mips_dma_sync_sg_for_device(struct device *dev, @@ -320,12 +319,10 @@ static void mips_dma_sync_sg_for_device(struct device *dev, { int i; - /* Make sure that gcc doesn't leave the empty loop body. */ - for (i = 0; i < nelems; i++, sg++) { - if (!plat_device_is_coherent(dev)) + if (!plat_device_is_coherent(dev)) + for (i = 0; i < nelems; i++, sg++) __dma_sync(sg_page(sg), sg->offset, sg->length, direction); - } } int mips_dma_mapping_error(struct device *dev, dma_addr_t dma_addr) diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c index 218c2109..cbd81d1 100644 --- a/arch/mips/mm/page.c +++ b/arch/mips/mm/page.c @@ -18,6 +18,7 @@ #include <asm/bugs.h> #include <asm/cacheops.h> +#include <asm/cpu-type.h> #include <asm/inst.h> #include <asm/io.h> #include <asm/page.h> diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c index 5d01392..08d05ae 100644 --- a/arch/mips/mm/sc-mips.c +++ b/arch/mips/mm/sc-mips.c @@ -6,6 +6,7 @@ #include <linux/sched.h> #include <linux/mm.h> +#include <asm/cpu-type.h> #include <asm/mipsregs.h> #include <asm/bcache.h> #include <asm/cacheops.h> @@ -71,7 +72,7 @@ static inline int mips_sc_is_activated(struct cpuinfo_mips *c) unsigned int tmp; /* Check the bypass bit (L2B) */ - switch (c->cputype) { + switch (current_cpu_type()) { case CPU_34K: case CPU_74K: case CPU_1004K: diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index 00b26a6..bb3a5f64 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -16,6 +16,7 @@ #include <linux/module.h> #include <asm/cpu.h> +#include <asm/cpu-type.h> #include <asm/bootinfo.h> #include <asm/mmu_context.h> #include <asm/pgtable.h> diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 821b451..9bb3a93 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -30,6 +30,7 @@ #include <linux/cache.h> #include <asm/cacheflush.h> +#include <asm/cpu-type.h> #include <asm/pgtable.h> #include <asm/war.h> #include <asm/uasm.h> diff --git a/arch/mips/mti-malta/malta-time.c b/arch/mips/mti-malta/malta-time.c index 53aad4a..a18af5f 100644 --- a/arch/mips/mti-malta/malta-time.c +++ b/arch/mips/mti-malta/malta-time.c @@ -27,6 +27,7 @@ #include <linux/timex.h> #include <linux/mc146818rtc.h> +#include <asm/cpu.h> #include <asm/mipsregs.h> #include <asm/mipsmtregs.h> #include <asm/hardirq.h> @@ -76,7 +77,7 @@ static void __init estimate_frequencies(void) #endif #if defined (CONFIG_KVM_GUEST) && defined (CONFIG_KVM_HOST_FREQ) - unsigned int prid = read_c0_prid() & 0xffff00; + unsigned int prid = read_c0_prid() & (PRID_COMP_MASK | PRID_IMP_MASK); /* * XXXKYMA: hardwire the CPU frequency to Host Freq/4 @@ -169,7 +170,7 @@ unsigned int get_c0_compare_int(void) void __init plat_time_init(void) { - unsigned int prid = read_c0_prid() & 0xffff00; + unsigned int prid = read_c0_prid() & (PRID_COMP_MASK | PRID_IMP_MASK); unsigned int freq; estimate_frequencies(); diff --git a/arch/mips/mti-sead3/sead3-time.c b/arch/mips/mti-sead3/sead3-time.c index a43ea3c..552d26c 100644 --- a/arch/mips/mti-sead3/sead3-time.c +++ b/arch/mips/mti-sead3/sead3-time.c @@ -7,6 +7,7 @@ */ #include <linux/init.h> +#include <asm/cpu.h> #include <asm/setup.h> #include <asm/time.h> #include <asm/irq.h> @@ -34,7 +35,7 @@ static void __iomem *status_reg = (void __iomem *)0xbf000410; */ static unsigned int __init estimate_cpu_frequency(void) { - unsigned int prid = read_c0_prid() & 0xffff00; + unsigned int prid = read_c0_prid() & (PRID_COMP_MASK | PRID_IMP_MASK); unsigned int tick = 0; unsigned int freq; unsigned int orig; diff --git a/arch/mips/netlogic/xlr/fmn-config.c b/arch/mips/netlogic/xlr/fmn-config.c index ed3bf0e..c7622c6 100644 --- a/arch/mips/netlogic/xlr/fmn-config.c +++ b/arch/mips/netlogic/xlr/fmn-config.c @@ -36,6 +36,7 @@ #include <linux/irq.h> #include <linux/interrupt.h> +#include <asm/cpu.h> #include <asm/mipsregs.h> #include <asm/netlogic/xlr/fmn.h> #include <asm/netlogic/xlr/xlr.h> @@ -187,7 +188,7 @@ void xlr_board_info_setup(void) int processor_id, num_core; num_core = hweight32(nlm_current_node()->coremask); - processor_id = read_c0_prid() & 0xff00; + processor_id = read_c0_prid() & PRID_IMP_MASK; setup_cpu_fmninfo(cpu, num_core); switch (processor_id) { diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c index 5e54247..4d1736f 100644 --- a/arch/mips/oprofile/common.c +++ b/arch/mips/oprofile/common.c @@ -12,6 +12,7 @@ #include <linux/oprofile.h> #include <linux/smp.h> #include <asm/cpu-info.h> +#include <asm/cpu-type.h> #include "op_impl.h" diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c index 44dd5aa..5ec2a7b 100644 --- a/arch/mips/pci/pci-bcm1480.c +++ b/arch/mips/pci/pci-bcm1480.c @@ -39,6 +39,7 @@ #include <linux/mm.h> #include <linux/console.h> #include <linux/tty.h> +#include <linux/vt.h> #include <asm/sibyte/bcm1480_regs.h> #include <asm/sibyte/bcm1480_scd.h> diff --git a/arch/mips/sibyte/bcm1480/setup.c b/arch/mips/sibyte/bcm1480/setup.c index 05ed92c..8e2e04f 100644 --- a/arch/mips/sibyte/bcm1480/setup.c +++ b/arch/mips/sibyte/bcm1480/setup.c @@ -22,6 +22,7 @@ #include <linux/string.h> #include <asm/bootinfo.h> +#include <asm/cpu.h> #include <asm/mipsregs.h> #include <asm/io.h> #include <asm/sibyte/sb1250.h> @@ -119,7 +120,7 @@ void __init bcm1480_setup(void) uint64_t sys_rev; int plldiv; - sb1_pass = read_c0_prid() & 0xff; + sb1_pass = read_c0_prid() & PRID_REV_MASK; sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION)); soc_type = SYS_SOC_TYPE(sys_rev); part_type = G_SYS_PART(sys_rev); diff --git a/arch/mips/sibyte/sb1250/setup.c b/arch/mips/sibyte/sb1250/setup.c index a14bd4c..3c02b2a 100644 --- a/arch/mips/sibyte/sb1250/setup.c +++ b/arch/mips/sibyte/sb1250/setup.c @@ -22,6 +22,7 @@ #include <linux/string.h> #include <asm/bootinfo.h> +#include <asm/cpu.h> #include <asm/mipsregs.h> #include <asm/io.h> #include <asm/sibyte/sb1250.h> @@ -182,7 +183,7 @@ void __init sb1250_setup(void) int plldiv; int bad_config = 0; - sb1_pass = read_c0_prid() & 0xff; + sb1_pass = read_c0_prid() & PRID_REV_MASK; sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION)); soc_type = SYS_SOC_TYPE(sys_rev); soc_pass = G_SYS_REVISION(sys_rev); diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c index 5b09b35..efad85c 100644 --- a/arch/mips/sni/setup.c +++ b/arch/mips/sni/setup.c @@ -25,6 +25,7 @@ #endif #include <asm/bootinfo.h> +#include <asm/cpu.h> #include <asm/io.h> #include <asm/reboot.h> #include <asm/sni.h> @@ -173,7 +174,7 @@ void __init plat_mem_setup(void) system_type = "RM300-Cxx"; break; case SNI_BRD_PCI_DESKTOP: - switch (read_c0_prid() & 0xff00) { + switch (read_c0_prid() & PRID_IMP_MASK) { case PRID_IMP_R4600: case PRID_IMP_R4700: system_type = "RM200-C20"; |
