diff options
Diffstat (limited to 'arch/mips')
164 files changed, 7312 insertions, 1163 deletions
diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms index 7ff9b54..aef6c91 100644 --- a/arch/mips/Kbuild.platforms +++ b/arch/mips/Kbuild.platforms @@ -11,6 +11,7 @@ platforms += dec platforms += emma platforms += jazz platforms += jz4740 +platforms += lantiq platforms += lasat platforms += loongson platforms += mipssim diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 8e256cc..cef1a85 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -212,6 +212,24 @@ config MACH_JZ4740 select HAVE_PWM select HAVE_CLK +config LANTIQ + bool "Lantiq based platforms" + select DMA_NONCOHERENT + select IRQ_CPU + select CEVT_R4K + select CSRC_R4K + select SYS_HAS_CPU_MIPS32_R1 + select SYS_HAS_CPU_MIPS32_R2 + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_MULTITHREADING + select SYS_HAS_EARLY_PRINTK + select ARCH_REQUIRE_GPIOLIB + select SWAP_IO_SPACE + select BOOT_RAW + select HAVE_CLK + select MIPS_MACHINE + config LASAT bool "LASAT Networks platforms" select CEVT_R4K @@ -736,6 +754,33 @@ config CAVIUM_OCTEON_REFERENCE_BOARD Hikari Say Y here for most Octeon reference boards. +config NLM_XLR_BOARD + bool "Netlogic XLR/XLS based systems" + depends on EXPERIMENTAL + select BOOT_ELF32 + select NLM_COMMON + select NLM_XLR + select SYS_HAS_CPU_XLR + select SYS_SUPPORTS_SMP + select HW_HAS_PCI + select SWAP_IO_SPACE + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select 64BIT_PHYS_ADDR + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select DMA_COHERENT + select NR_CPUS_DEFAULT_32 + select CEVT_R4K + select CSRC_R4K + select IRQ_CPU + select ZONE_DMA if 64BIT + select SYNC_R4K + select SYS_HAS_EARLY_PRINTK + help + Support for systems based on Netlogic XLR and XLS processors. + Say Y here if you have a XLR or XLS based board. + endchoice source "arch/mips/alchemy/Kconfig" @@ -743,6 +788,7 @@ source "arch/mips/ath79/Kconfig" source "arch/mips/bcm63xx/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/jz4740/Kconfig" +source "arch/mips/lantiq/Kconfig" source "arch/mips/lasat/Kconfig" source "arch/mips/pmc-sierra/Kconfig" source "arch/mips/powertv/Kconfig" @@ -752,6 +798,7 @@ source "arch/mips/txx9/Kconfig" source "arch/mips/vr41xx/Kconfig" source "arch/mips/cavium-octeon/Kconfig" source "arch/mips/loongson/Kconfig" +source "arch/mips/netlogic/Kconfig" endmenu @@ -997,9 +1044,6 @@ config IRQ_GT641XX config IRQ_GIC bool -config IRQ_CPU_OCTEON - bool - config MIPS_BOARDS_GEN bool @@ -1359,8 +1403,6 @@ config CPU_SB1 config CPU_CAVIUM_OCTEON bool "Cavium Octeon processor" depends on SYS_HAS_CPU_CAVIUM_OCTEON - select IRQ_CPU - select IRQ_CPU_OCTEON select CPU_HAS_PREFETCH select CPU_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_SMP @@ -1425,6 +1467,17 @@ config CPU_BMIPS5000 help Broadcom BMIPS5000 processors. +config CPU_XLR + bool "Netlogic XLR SoC" + depends on SYS_HAS_CPU_XLR + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select WEAK_ORDERING + select WEAK_REORDERING_BEYOND_LLSC + select CPU_SUPPORTS_HUGEPAGES + help + Netlogic Microsystems XLR/XLS processors. endchoice if CPU_LOONGSON2F @@ -1555,6 +1608,9 @@ config SYS_HAS_CPU_BMIPS4380 config SYS_HAS_CPU_BMIPS5000 bool +config SYS_HAS_CPU_XLR + bool + # # CPU may reorder R->R, R->W, W->R, W->W # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC @@ -2339,6 +2395,7 @@ config MMU config I8253 bool + select CLKSRC_I8253 select MIPS_EXTERNAL_TIMER config ZONE_DMA32 diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 53e3514..884819c 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -191,6 +191,18 @@ endif # include $(srctree)/arch/mips/Kbuild.platforms +# +# NETLOGIC SOC Common (common) +# +cflags-$(CONFIG_NLM_COMMON) += -I$(srctree)/arch/mips/include/asm/mach-netlogic +cflags-$(CONFIG_NLM_COMMON) += -I$(srctree)/arch/mips/include/asm/netlogic + +# +# NETLOGIC XLR/XLS SoC, Simulator and boards +# +core-$(CONFIG_NLM_XLR) += arch/mips/netlogic/xlr/ +load-$(CONFIG_NLM_XLR_BOARD) += 0xffffffff84000000 + cflags-y += -I$(srctree)/arch/mips/include/asm/mach-generic drivers-$(CONFIG_PCI) += arch/mips/pci/ diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c index ca0506a..3a5abb5 100644 --- a/arch/mips/alchemy/common/dbdma.c +++ b/arch/mips/alchemy/common/dbdma.c @@ -36,7 +36,7 @@ #include <linux/spinlock.h> #include <linux/interrupt.h> #include <linux/module.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> @@ -58,7 +58,8 @@ static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock); /* I couldn't find a macro that did this... */ #define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1)) -static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE; +static dbdma_global_t *dbdma_gptr = + (dbdma_global_t *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR); static int dbdma_initialized; static dbdev_tab_t dbdev_tab[] = { @@ -299,7 +300,7 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, if (ctp != NULL) { memset(ctp, 0, sizeof(chan_tab_t)); ctp->chan_index = chan = i; - dcp = DDMA_CHANNEL_BASE; + dcp = KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR); dcp += (0x0100 * chan); ctp->chan_ptr = (au1x_dma_chan_t *)dcp; cp = (au1x_dma_chan_t *)dcp; @@ -958,105 +959,75 @@ u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr) } -struct alchemy_dbdma_sysdev { - struct sys_device sysdev; - u32 pm_regs[NUM_DBDMA_CHANS + 1][6]; -}; +static unsigned long alchemy_dbdma_pm_data[NUM_DBDMA_CHANS + 1][6]; -static int alchemy_dbdma_suspend(struct sys_device *dev, - pm_message_t state) +static int alchemy_dbdma_suspend(void) { - struct alchemy_dbdma_sysdev *sdev = - container_of(dev, struct alchemy_dbdma_sysdev, sysdev); int i; - u32 addr; + void __iomem *addr; - addr = DDMA_GLOBAL_BASE; - sdev->pm_regs[0][0] = au_readl(addr + 0x00); - sdev->pm_regs[0][1] = au_readl(addr + 0x04); - sdev->pm_regs[0][2] = au_readl(addr + 0x08); - sdev->pm_regs[0][3] = au_readl(addr + 0x0c); + addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR); + alchemy_dbdma_pm_data[0][0] = __raw_readl(addr + 0x00); + alchemy_dbdma_pm_data[0][1] = __raw_readl(addr + 0x04); + alchemy_dbdma_pm_data[0][2] = __raw_readl(addr + 0x08); + alchemy_dbdma_pm_data[0][3] = __raw_readl(addr + 0x0c); /* save channel configurations */ - for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) { - sdev->pm_regs[i][0] = au_readl(addr + 0x00); - sdev->pm_regs[i][1] = au_readl(addr + 0x04); - sdev->pm_regs[i][2] = au_readl(addr + 0x08); - sdev->pm_regs[i][3] = au_readl(addr + 0x0c); - sdev->pm_regs[i][4] = au_readl(addr + 0x10); - sdev->pm_regs[i][5] = au_readl(addr + 0x14); + addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR); + for (i = 1; i <= NUM_DBDMA_CHANS; i++) { + alchemy_dbdma_pm_data[i][0] = __raw_readl(addr + 0x00); + alchemy_dbdma_pm_data[i][1] = __raw_readl(addr + 0x04); + alchemy_dbdma_pm_data[i][2] = __raw_readl(addr + 0x08); + alchemy_dbdma_pm_data[i][3] = __raw_readl(addr + 0x0c); + alchemy_dbdma_pm_data[i][4] = __raw_readl(addr + 0x10); + alchemy_dbdma_pm_data[i][5] = __raw_readl(addr + 0x14); /* halt channel */ - au_writel(sdev->pm_regs[i][0] & ~1, addr + 0x00); - au_sync(); - while (!(au_readl(addr + 0x14) & 1)) - au_sync(); + __raw_writel(alchemy_dbdma_pm_data[i][0] & ~1, addr + 0x00); + wmb(); + while (!(__raw_readl(addr + 0x14) & 1)) + wmb(); addr += 0x100; /* next channel base */ } /* disable channel interrupts */ - au_writel(0, DDMA_GLOBAL_BASE + 0x0c); - au_sync(); + addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR); + __raw_writel(0, addr + 0x0c); + wmb(); return 0; } -static int alchemy_dbdma_resume(struct sys_device *dev) +static void alchemy_dbdma_resume(void) { - struct alchemy_dbdma_sysdev *sdev = - container_of(dev, struct alchemy_dbdma_sysdev, sysdev); int i; - u32 addr; + void __iomem *addr; - addr = DDMA_GLOBAL_BASE; - au_writel(sdev->pm_regs[0][0], addr + 0x00); - au_writel(sdev->pm_regs[0][1], addr + 0x04); - au_writel(sdev->pm_regs[0][2], addr + 0x08); - au_writel(sdev->pm_regs[0][3], addr + 0x0c); + addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_CONF_PHYS_ADDR); + __raw_writel(alchemy_dbdma_pm_data[0][0], addr + 0x00); + __raw_writel(alchemy_dbdma_pm_data[0][1], addr + 0x04); + __raw_writel(alchemy_dbdma_pm_data[0][2], addr + 0x08); + __raw_writel(alchemy_dbdma_pm_data[0][3], addr + 0x0c); /* restore channel configurations */ - for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) { - au_writel(sdev->pm_regs[i][0], addr + 0x00); - au_writel(sdev->pm_regs[i][1], addr + 0x04); - au_writel(sdev->pm_regs[i][2], addr + 0x08); - au_writel(sdev->pm_regs[i][3], addr + 0x0c); - au_writel(sdev->pm_regs[i][4], addr + 0x10); - au_writel(sdev->pm_regs[i][5], addr + 0x14); - au_sync(); + addr = (void __iomem *)KSEG1ADDR(AU1550_DBDMA_PHYS_ADDR); + for (i = 1; i <= NUM_DBDMA_CHANS; i++) { + __raw_writel(alchemy_dbdma_pm_data[i][0], addr + 0x00); + __raw_writel(alchemy_dbdma_pm_data[i][1], addr + 0x04); + __raw_writel(alchemy_dbdma_pm_data[i][2], addr + 0x08); + __raw_writel(alchemy_dbdma_pm_data[i][3], addr + 0x0c); + __raw_writel(alchemy_dbdma_pm_data[i][4], addr + 0x10); + __raw_writel(alchemy_dbdma_pm_data[i][5], addr + 0x14); + wmb(); addr += 0x100; /* next channel base */ } - - return 0; } -static struct sysdev_class alchemy_dbdma_sysdev_class = { - .name = "dbdma", +static struct syscore_ops alchemy_dbdma_syscore_ops = { .suspend = alchemy_dbdma_suspend, .resume = alchemy_dbdma_resume, }; -static int __init alchemy_dbdma_sysdev_init(void) -{ - struct alchemy_dbdma_sysdev *sdev; - int ret; - - ret = sysdev_class_register(&alchemy_dbdma_sysdev_class); - if (ret) - return ret; - - sdev = kzalloc(sizeof(struct alchemy_dbdma_sysdev), GFP_KERNEL); - if (!sdev) - return -ENOMEM; - - sdev->sysdev.id = -1; - sdev->sysdev.cls = &alchemy_dbdma_sysdev_class; - ret = sysdev_register(&sdev->sysdev); - if (ret) - kfree(sdev); - - return ret; -} - static int __init au1xxx_dbdma_init(void) { int irq_nr, ret; @@ -1084,11 +1055,7 @@ static int __init au1xxx_dbdma_init(void) else { dbdma_initialized = 1; printk(KERN_INFO "Alchemy DBDMA initialized\n"); - ret = alchemy_dbdma_sysdev_init(); - if (ret) { - printk(KERN_ERR "DBDMA PM init failed\n"); - ret = 0; - } + register_syscore_ops(&alchemy_dbdma_syscore_ops); } return ret; diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c index d527887..347980e 100644 --- a/arch/mips/alchemy/common/dma.c +++ b/arch/mips/alchemy/common/dma.c @@ -58,6 +58,9 @@ * returned from request_dma. */ +/* DMA Channel register block spacing */ +#define DMA_CHANNEL_LEN 0x00000100 + DEFINE_SPINLOCK(au1000_dma_spin_lock); struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = { @@ -77,22 +80,23 @@ static const struct dma_dev { unsigned int fifo_addr; unsigned int dma_mode; } dma_dev_table[DMA_NUM_DEV] = { - {UART0_ADDR + UART_TX, 0}, - {UART0_ADDR + UART_RX, 0}, - {0, 0}, - {0, 0}, - {AC97C_DATA, DMA_DW16 }, /* coherent */ - {AC97C_DATA, DMA_DR | DMA_DW16 }, /* coherent */ - {UART3_ADDR + UART_TX, DMA_DW8 | DMA_NC}, - {UART3_ADDR + UART_RX, DMA_DR | DMA_DW8 | DMA_NC}, - {USBD_EP0RD, DMA_DR | DMA_DW8 | DMA_NC}, - {USBD_EP0WR, DMA_DW8 | DMA_NC}, - {USBD_EP2WR, DMA_DW8 | DMA_NC}, - {USBD_EP3WR, DMA_DW8 | DMA_NC}, - {USBD_EP4RD, DMA_DR | DMA_DW8 | DMA_NC}, - {USBD_EP5RD, DMA_DR | DMA_DW8 | DMA_NC}, - {I2S_DATA, DMA_DW32 | DMA_NC}, - {I2S_DATA, DMA_DR | DMA_DW32 | DMA_NC} + { AU1000_UART0_PHYS_ADDR + 0x04, DMA_DW8 }, /* UART0_TX */ + { AU1000_UART0_PHYS_ADDR + 0x00, DMA_DW8 | DMA_DR }, /* UART0_RX */ + { 0, 0 }, /* DMA_REQ0 */ + { 0, 0 }, /* DMA_REQ1 */ + { AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 }, /* AC97 TX c */ + { AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 | DMA_DR }, /* AC97 RX c */ + { AU1000_UART3_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* UART3_TX */ + { AU1000_UART3_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* UART3_RX */ + { AU1000_USBD_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */ + { AU1000_USBD_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */ + { AU1000_USBD_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */ + { AU1000_USBD_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */ + { AU1000_USBD_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */ + { AU1000_USBD_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */ + /* on Au1500, these 2 are DMA_REQ2/3 (GPIO208/209) instead! */ + { AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC}, /* I2S TX */ + { AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC | DMA_DR}, /* I2S RX */ }; int au1000_dma_read_proc(char *buf, char **start, off_t fpos, @@ -123,10 +127,10 @@ int au1000_dma_read_proc(char *buf, char **start, off_t fpos, /* Device FIFO addresses and default DMA modes - 2nd bank */ static const struct dma_dev dma_dev_table_bank2[DMA_NUM_DEV_BANK2] = { - { SD0_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */ - { SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 }, /* coherent */ - { SD1_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */ - { SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 } /* coherent */ + { AU1100_SD0_PHYS_ADDR + 0x00, DMA_DS | DMA_DW8 }, /* coherent */ + { AU1100_SD0_PHYS_ADDR + 0x04, DMA_DS | DMA_DW8 | DMA_DR }, /* coherent */ + { AU1100_SD1_PHYS_ADDR + 0x00, DMA_DS | DMA_DW8 }, /* coherent */ + { AU1100_SD1_PHYS_ADDR + 0x04, DMA_DS | DMA_DW8 | DMA_DR } /* coherent */ }; void dump_au1000_dma_channel(unsigned int dmanr) @@ -202,7 +206,7 @@ int request_au1000_dma(int dev_id, const char *dev_str, } /* fill it in */ - chan->io = DMA_CHANNEL_BASE + i * DMA_CHANNEL_LEN; + chan->io = KSEG1ADDR(AU1000_DMA_PHYS_ADDR) + i * DMA_CHANNEL_LEN; chan->dev_id = dev_id; chan->dev_str = dev_str; chan->fifo_addr = dev->fifo_addr; diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c index 55dd7c8..8b60ba0 100644 --- a/arch/mips/alchemy/common/irq.c +++ b/arch/mips/alchemy/common/irq.c @@ -30,7 +30,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/slab.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <asm/irq_cpu.h> #include <asm/mipsregs.h> @@ -39,6 +39,36 @@ #include <asm/mach-pb1x00/pb1000.h> #endif +/* Interrupt Controller register offsets */ +#define IC_CFG0RD 0x40 +#define IC_CFG0SET 0x40 +#define IC_CFG0CLR 0x44 +#define IC_CFG1RD 0x48 +#define IC_CFG1SET 0x48 +#define IC_CFG1CLR 0x4C +#define IC_CFG2RD 0x50 +#define IC_CFG2SET 0x50 +#define IC_CFG2CLR 0x54 +#define IC_REQ0INT 0x54 +#define IC_SRCRD 0x58 +#define IC_SRCSET 0x58 +#define IC_SRCCLR 0x5C +#define IC_REQ1INT 0x5C +#define IC_ASSIGNRD 0x60 +#define IC_ASSIGNSET 0x60 +#define IC_ASSIGNCLR 0x64 +#define IC_WAKERD 0x68 +#define IC_WAKESET 0x68 +#define IC_WAKECLR 0x6C +#define IC_MASKRD 0x70 +#define IC_MASKSET 0x70 +#define IC_MASKCLR 0x74 +#define IC_RISINGRD 0x78 +#define IC_RISINGCLR 0x78 +#define IC_FALLINGRD 0x7C +#define IC_FALLINGCLR 0x7C +#define IC_TESTBIT 0x80 + static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type); /* NOTE on interrupt priorities: The original writers of this code said: @@ -221,89 +251,101 @@ struct au1xxx_irqmap au1200_irqmap[] __initdata = { static void au1x_ic0_unmask(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; - au_writel(1 << bit, IC0_MASKSET); - au_writel(1 << bit, IC0_WAKESET); - au_sync(); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); + + __raw_writel(1 << bit, base + IC_MASKSET); + __raw_writel(1 << bit, base + IC_WAKESET); + wmb(); } static void au1x_ic1_unmask(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; - au_writel(1 << bit, IC1_MASKSET); - au_writel(1 << bit, IC1_WAKESET); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); + + __raw_writel(1 << bit, base + IC_MASKSET); + __raw_writel(1 << bit, base + IC_WAKESET); /* very hacky. does the pb1000 cpld auto-disable this int? * nowhere in the current kernel sources is it disabled. --mlau */ #if defined(CONFIG_MIPS_PB1000) if (d->irq == AU1000_GPIO15_INT) - au_writel(0x4000, PB1000_MDR); /* enable int */ + __raw_writel(0x4000, (void __iomem *)PB1000_MDR); /* enable int */ #endif - au_sync(); + wmb(); } static void au1x_ic0_mask(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; - au_writel(1 << bit, IC0_MASKCLR); - au_writel(1 << bit, IC0_WAKECLR); - au_sync(); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); + + __raw_writel(1 << bit, base + IC_MASKCLR); + __raw_writel(1 << bit, base + IC_WAKECLR); + wmb(); } static void au1x_ic1_mask(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; - au_writel(1 << bit, IC1_MASKCLR); - au_writel(1 << bit, IC1_WAKECLR); - au_sync(); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); + + __raw_writel(1 << bit, base + IC_MASKCLR); + __raw_writel(1 << bit, base + IC_WAKECLR); + wmb(); } static void au1x_ic0_ack(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); /* * This may assume that we don't get interrupts from * both edges at once, or if we do, that we don't care. */ - au_writel(1 << bit, IC0_FALLINGCLR); - au_writel(1 << bit, IC0_RISINGCLR); - au_sync(); + __raw_writel(1 << bit, base + IC_FALLINGCLR); + __raw_writel(1 << bit, base + IC_RISINGCLR); + wmb(); } static void au1x_ic1_ack(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); /* * This may assume that we don't get interrupts from * both edges at once, or if we do, that we don't care. */ - au_writel(1 << bit, IC1_FALLINGCLR); - au_writel(1 << bit, IC1_RISINGCLR); - au_sync(); + __raw_writel(1 << bit, base + IC_FALLINGCLR); + __raw_writel(1 << bit, base + IC_RISINGCLR); + wmb(); } static void au1x_ic0_maskack(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); - au_writel(1 << bit, IC0_WAKECLR); - au_writel(1 << bit, IC0_MASKCLR); - au_writel(1 << bit, IC0_RISINGCLR); - au_writel(1 << bit, IC0_FALLINGCLR); - au_sync(); + __raw_writel(1 << bit, base + IC_WAKECLR); + __raw_writel(1 << bit, base + IC_MASKCLR); + __raw_writel(1 << bit, base + IC_RISINGCLR); + __raw_writel(1 << bit, base + IC_FALLINGCLR); + wmb(); } static void au1x_ic1_maskack(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); - au_writel(1 << bit, IC1_WAKECLR); - au_writel(1 << bit, IC1_MASKCLR); - au_writel(1 << bit, IC1_RISINGCLR); - au_writel(1 << bit, IC1_FALLINGCLR); - au_sync(); + __raw_writel(1 << bit, base + IC_WAKECLR); + __raw_writel(1 << bit, base + IC_MASKCLR); + __raw_writel(1 << bit, base + IC_RISINGCLR); + __raw_writel(1 << bit, base + IC_FALLINGCLR); + wmb(); } static int au1x_ic1_setwake(struct irq_data *d, unsigned int on) @@ -318,13 +360,13 @@ static int au1x_ic1_setwake(struct irq_data *d, unsigned int on) return -EINVAL; local_irq_save(flags); - wakemsk = au_readl(SYS_WAKEMSK); + wakemsk = __raw_readl((void __iomem *)SYS_WAKEMSK); if (on) wakemsk |= 1 << bit; else wakemsk &= ~(1 << bit); - au_writel(wakemsk, SYS_WAKEMSK); - au_sync(); + __raw_writel(wakemsk, (void __iomem *)SYS_WAKEMSK); + wmb(); local_irq_restore(flags); return 0; @@ -356,81 +398,74 @@ static struct irq_chip au1x_ic1_chip = { static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type) { struct irq_chip *chip; - unsigned long icr[6]; - unsigned int bit, ic, irq = d->irq; + unsigned int bit, irq = d->irq; irq_flow_handler_t handler = NULL; unsigned char *name = NULL; + void __iomem *base; int ret; if (irq >= AU1000_INTC1_INT_BASE) { bit = irq - AU1000_INTC1_INT_BASE; chip = &au1x_ic1_chip; - ic = 1; + base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); } else { bit = irq - AU1000_INTC0_INT_BASE; chip = &au1x_ic0_chip; - ic = 0; + base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); } if (bit > 31) return -EINVAL; - icr[0] = ic ? IC1_CFG0SET : IC0_CFG0SET; - icr[1] = ic ? IC1_CFG1SET : IC0_CFG1SET; - icr[2] = ic ? IC1_CFG2SET : IC0_CFG2SET; - icr[3] = ic ? IC1_CFG0CLR : IC0_CFG0CLR; - icr[4] = ic ? IC1_CFG1CLR : IC0_CFG1CLR; - icr[5] = ic ? IC1_CFG2CLR : IC0_CFG2CLR; - ret = 0; switch (flow_type) { /* cfgregs 2:1:0 */ case IRQ_TYPE_EDGE_RISING: /* 0:0:1 */ - au_writel(1 << bit, icr[5]); - au_writel(1 << bit, icr[4]); - au_writel(1 << bit, icr[0]); + __raw_writel(1 << bit, base + IC_CFG2CLR); + __raw_writel(1 << bit, base + IC_CFG1CLR); + __raw_writel(1 << bit, base + IC_CFG0SET); handler = handle_edge_irq; name = "riseedge"; break; case IRQ_TYPE_EDGE_FALLING: /* 0:1:0 */ - au_writel(1 << bit, icr[5]); - au_writel(1 << bit, icr[1]); - au_writel(1 << bit, icr[3]); + __raw_writel(1 << bit, base + IC_CFG2CLR); + __raw_writel(1 << bit, base + IC_CFG1SET); + __raw_writel(1 << bit, base + IC_CFG0CLR); handler = handle_edge_irq; name = "falledge"; break; case IRQ_TYPE_EDGE_BOTH: /* 0:1:1 */ - au_writel(1 << bit, icr[5]); - au_writel(1 << bit, icr[1]); - au_writel(1 << bit, icr[0]); + __raw_writel(1 << bit, base + IC_CFG2CLR); + __raw_writel(1 << bit, base + IC_CFG1SET); + __raw_writel(1 << bit, base + IC_CFG0SET); handler = handle_edge_irq; name = "bothedge"; break; case IRQ_TYPE_LEVEL_HIGH: /* 1:0:1 */ - au_writel(1 << bit, icr[2]); - au_writel(1 << bit, icr[4]); - au_writel(1 << bit, icr[0]); + __raw_writel(1 << bit, base + IC_CFG2SET); + __raw_writel(1 << bit, base + IC_CFG1CLR); + __raw_writel(1 << bit, base + IC_CFG0SET); handler = handle_level_irq; name = "hilevel"; break; case IRQ_TYPE_LEVEL_LOW: /* 1:1:0 */ - au_writel(1 << bit, icr[2]); - au_writel(1 << bit, icr[1]); - au_writel(1 << bit, icr[3]); + __raw_writel(1 << bit, base + IC_CFG2SET); + __raw_writel(1 << bit, base + IC_CFG1SET); + __raw_writel(1 << bit, base + IC_CFG0CLR); handler = handle_level_irq; name = "lowlevel"; break; case IRQ_TYPE_NONE: /* 0:0:0 */ - au_writel(1 << bit, icr[5]); - au_writel(1 << bit, icr[4]); - au_writel(1 << bit, icr[3]); + __raw_writel(1 << bit, base + IC_CFG2CLR); + __raw_writel(1 << bit, base + IC_CFG1CLR); + __raw_writel(1 << bit, base + IC_CFG0CLR); break; default: ret = -EINVAL; } __irq_set_chip_handler_name_locked(d->irq, chip, handler, name); - au_sync(); + wmb(); return ret; } @@ -444,21 +479,21 @@ asmlinkage void plat_irq_dispatch(void) off = MIPS_CPU_IRQ_BASE + 7; goto handle; } else if (pending & CAUSEF_IP2) { - s = IC0_REQ0INT; + s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ0INT; off = AU1000_INTC0_INT_BASE; } else if (pending & CAUSEF_IP3) { - s = IC0_REQ1INT; + s = KSEG1ADDR(AU1000_IC0_PHYS_ADDR) + IC_REQ1INT; off = AU1000_INTC0_INT_BASE; } else if (pending & CAUSEF_IP4) { - s = IC1_REQ0INT; + s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ0INT; off = AU1000_INTC1_INT_BASE; } else if (pending & CAUSEF_IP5) { - s = IC1_REQ1INT; + s = KSEG1ADDR(AU1000_IC1_PHYS_ADDR) + IC_REQ1INT; off = AU1000_INTC1_INT_BASE; } else goto spurious; - s = au_readl(s); + s = __raw_readl((void __iomem *)s); if (unlikely(!s)) { spurious: spurious_interrupt(); @@ -469,48 +504,42 @@ handle: do_IRQ(off); } + +static inline void ic_init(void __iomem *base) +{ + /* initialize interrupt controller to a safe state */ + __raw_writel(0xffffffff, base + IC_CFG0CLR); + __raw_writel(0xffffffff, base + IC_CFG1CLR); + __raw_writel(0xffffffff, base + IC_CFG2CLR); + __raw_writel(0xffffffff, base + IC_MASKCLR); + __raw_writel(0xffffffff, base + IC_ASSIGNCLR); + __raw_writel(0xffffffff, base + IC_WAKECLR); + __raw_writel(0xffffffff, base + IC_SRCSET); + __raw_writel(0xffffffff, base + IC_FALLINGCLR); + __raw_writel(0xffffffff, base + IC_RISINGCLR); + __raw_writel(0x00000000, base + IC_TESTBIT); + wmb(); +} + static void __init au1000_init_irq(struct au1xxx_irqmap *map) { unsigned int bit, irq_nr; - int i; - - /* - * Initialize interrupt controllers to a safe state. - */ - au_writel(0xffffffff, IC0_CFG0CLR); - au_writel(0xffffffff, IC0_CFG1CLR); - au_writel(0xffffffff, IC0_CFG2CLR); - au_writel(0xffffffff, IC0_MASKCLR); - au_writel(0xffffffff, IC0_ASSIGNCLR); - au_writel(0xffffffff, IC0_WAKECLR); - au_writel(0xffffffff, IC0_SRCSET); - au_writel(0xffffffff, IC0_FALLINGCLR); - au_writel(0xffffffff, IC0_RISINGCLR); - au_writel(0x00000000, IC0_TESTBIT); - - au_writel(0xffffffff, IC1_CFG0CLR); - au_writel(0xffffffff, IC1_CFG1CLR); - au_writel(0xffffffff, IC1_CFG2CLR); - au_writel(0xffffffff, IC1_MASKCLR); - au_writel(0xffffffff, IC1_ASSIGNCLR); - au_writel(0xffffffff, IC1_WAKECLR); - au_writel(0xffffffff, IC1_SRCSET); - au_writel(0xffffffff, IC1_FALLINGCLR); - au_writel(0xffffffff, IC1_RISINGCLR); - au_writel(0x00000000, IC1_TESTBIT); + void __iomem *base; + ic_init((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR)); + ic_init((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR)); mips_cpu_irq_init(); /* register all 64 possible IC0+IC1 irq sources as type "none". * Use set_irq_type() to set edge/level behaviour at runtime. */ - for (i = AU1000_INTC0_INT_BASE; - (i < AU1000_INTC0_INT_BASE + 32); i++) - au1x_ic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE); + for (irq_nr = AU1000_INTC0_INT_BASE; + (irq_nr < AU1000_INTC0_INT_BASE + 32); irq_nr++) + au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE); - for (i = AU1000_INTC1_INT_BASE; - (i < AU1000_INTC1_INT_BASE + 32); i++) - au1x_ic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE); + for (irq_nr = AU1000_INTC1_INT_BASE; + (irq_nr < AU1000_INTC1_INT_BASE + 32); irq_nr++) + au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE); /* * Initialize IC0, which is fixed per processor. @@ -520,13 +549,13 @@ static void __init au1000_init_irq(struct au1xxx_irqmap *map) if (irq_nr >= AU1000_INTC1_INT_BASE) { bit = irq_nr - AU1000_INTC1_INT_BASE; - if (map->im_request) - au_writel(1 << bit, IC1_ASSIGNSET); + base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); } else { bit = irq_nr - AU1000_INTC0_INT_BASE; - if (map->im_request) - au_writel(1 << bit, IC0_ASSIGNSET); + base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); } + if (map->im_request) + __raw_writel(1 << bit, base + IC_ASSIGNSET); au1x_ic_settype(irq_get_irq_data(irq_nr), map->im_type); ++map; @@ -556,90 +585,62 @@ void __init arch_init_irq(void) } } -struct alchemy_ic_sysdev { - struct sys_device sysdev; - void __iomem *base; - unsigned long pmdata[7]; -}; -static int alchemy_ic_suspend(struct sys_device *dev, pm_message_t state) -{ - struct alchemy_ic_sysdev *icdev = - container_of(dev, struct alchemy_ic_sysdev, sysdev); +static unsigned long alchemy_ic_pmdata[7 * 2]; - icdev->pmdata[0] = __raw_readl(icdev->base + IC_CFG0RD); - icdev->pmdata[1] = __raw_readl(icdev->base + IC_CFG1RD); - icdev->pmdata[2] = __raw_readl(icdev->base + IC_CFG2RD); - icdev->pmdata[3] = __raw_readl(icdev->base + IC_SRCRD); - icdev->pmdata[4] = __raw_readl(icdev->base + IC_ASSIGNRD); - icdev->pmdata[5] = __raw_readl(icdev->base + IC_WAKERD); - icdev->pmdata[6] = __raw_readl(icdev->base + IC_MASKRD); - - return 0; +static inline void alchemy_ic_suspend_one(void __iomem *base, unsigned long *d) +{ + d[0] = __raw_readl(base + IC_CFG0RD); + d[1] = __raw_readl(base + IC_CFG1RD); + d[2] = __raw_readl(base + IC_CFG2RD); + d[3] = __raw_readl(base + IC_SRCRD); + d[4] = __raw_readl(base + IC_ASSIGNRD); + d[5] = __raw_readl(base + IC_WAKERD); + d[6] = __raw_readl(base + IC_MASKRD); + ic_init(base); /* shut it up too while at it */ } -static int alchemy_ic_resume(struct sys_device *dev) +static inline void alchemy_ic_resume_one(void __iomem *base, unsigned long *d) { - struct alchemy_ic_sysdev *icdev = - container_of(dev, struct alchemy_ic_sysdev, sysdev); - - __raw_writel(0xffffffff, icdev->base + IC_MASKCLR); - __raw_writel(0xffffffff, icdev->base + IC_CFG0CLR); - __raw_writel(0xffffffff, icdev->base + IC_CFG1CLR); - __raw_writel(0xffffffff, icdev->base + IC_CFG2CLR); - __raw_writel(0xffffffff, icdev->base + IC_SRCCLR); - __raw_writel(0xffffffff, icdev->base + IC_ASSIGNCLR); - __raw_writel(0xffffffff, icdev->base + IC_WAKECLR); - __raw_writel(0xffffffff, icdev->base + IC_RISINGCLR); - __raw_writel(0xffffffff, icdev->base + IC_FALLINGCLR); - __raw_writel(0x00000000, icdev->base + IC_TESTBIT); - wmb(); - __raw_writel(icdev->pmdata[0], icdev->base + IC_CFG0SET); - __raw_writel(icdev->pmdata[1], icdev->base + IC_CFG1SET); - __raw_writel(icdev->pmdata[2], icdev->base + IC_CFG2SET); - __raw_writel(icdev->pmdata[3], icdev->base + IC_SRCSET); - __raw_writel(icdev->pmdata[4], icdev->base + IC_ASSIGNSET); - __raw_writel(icdev->pmdata[5], icdev->base + IC_WAKESET); + ic_init(base); + + __raw_writel(d[0], base + IC_CFG0SET); + __raw_writel(d[1], base + IC_CFG1SET); + __raw_writel(d[2], base + IC_CFG2SET); + __raw_writel(d[3], base + IC_SRCSET); + __raw_writel(d[4], base + IC_ASSIGNSET); + __raw_writel(d[5], base + IC_WAKESET); wmb(); - __raw_writel(icdev->pmdata[6], icdev->base + IC_MASKSET); + __raw_writel(d[6], base + IC_MASKSET); wmb(); +} +static int alchemy_ic_suspend(void) +{ + alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR), + alchemy_ic_pmdata); + alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR), + &alchemy_ic_pmdata[7]); return 0; } -static struct sysdev_class alchemy_ic_sysdev_class = { - .name = "ic", +static void alchemy_ic_resume(void) +{ + alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR), + &alchemy_ic_pmdata[7]); + alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR), + alchemy_ic_pmdata); +} + +static struct syscore_ops alchemy_ic_syscore_ops = { .suspend = alchemy_ic_suspend, .resume = alchemy_ic_resume, }; -static int __init alchemy_ic_sysdev_init(void) +static int __init alchemy_ic_pm_init(void) { - struct alchemy_ic_sysdev *icdev; - unsigned long icbase[2] = { IC0_PHYS_ADDR, IC1_PHYS_ADDR }; - int err, i; - - err = sysdev_class_register(&alchemy_ic_sysdev_class); - if (err) - return err; - - for (i = 0; i < 2; i++) { - icdev = kzalloc(sizeof(struct alchemy_ic_sysdev), GFP_KERNEL); - if (!icdev) - return -ENOMEM; - - icdev->base = ioremap(icbase[i], 0x1000); - - icdev->sysdev.id = i; - icdev->sysdev.cls = &alchemy_ic_sysdev_class; - err = sysdev_register(&icdev->sysdev); - if (err) { - kfree(icdev); - return err; - } - } - + register_syscore_ops(&alchemy_ic_syscore_ops); return 0; } -device_initcall(alchemy_ic_sysdev_init); +device_initcall(alchemy_ic_pm_init); diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c index 9e7814d..3b2c18b 100644 --- a/arch/mips/alchemy/common/platform.c +++ b/arch/mips/alchemy/common/platform.c @@ -13,9 +13,10 @@ #include <linux/dma-mapping.h> #include <linux/etherdevice.h> +#include <linux/init.h> #include <linux/platform_device.h> #include <linux/serial_8250.h> -#include <linux/init.h> +#include <linux/slab.h> #include <asm/mach-au1x00/au1xxx.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> @@ -30,21 +31,12 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state, #ifdef CONFIG_SERIAL_8250 switch (state) { case 0: - if ((__raw_readl(port->membase + UART_MOD_CNTRL) & 3) != 3) { - /* power-on sequence as suggested in the databooks */ - __raw_writel(0, port->membase + UART_MOD_CNTRL); - wmb(); - __raw_writel(1, port->membase + UART_MOD_CNTRL); - wmb(); - } - __raw_writel(3, port->membase + UART_MOD_CNTRL); /* full on */ - wmb(); + alchemy_uart_enable(CPHYSADDR(port->membase)); serial8250_do_pm(port, state, old_state); break; case 3: /* power off */ serial8250_do_pm(port, state, old_state); - __raw_writel(0, port->membase + UART_MOD_CNTRL); - wmb(); + alchemy_uart_disable(CPHYSADDR(port->membase)); break; default: serial8250_do_pm(port, state, old_state); @@ -65,38 +57,60 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state, .pm = alchemy_8250_pm, \ } -static struct plat_serial8250_port au1x00_uart_data[] = { -#if defined(CONFIG_SOC_AU1000) - PORT(UART0_PHYS_ADDR, AU1000_UART0_INT), - PORT(UART1_PHYS_ADDR, AU1000_UART1_INT), - PORT(UART2_PHYS_ADDR, AU1000_UART2_INT), - PORT(UART3_PHYS_ADDR, AU1000_UART3_INT), -#elif defined(CONFIG_SOC_AU1500) - PORT(UART0_PHYS_ADDR, AU1500_UART0_INT), - PORT(UART3_PHYS_ADDR, AU1500_UART3_INT), -#elif defined(CONFIG_SOC_AU1100) - PORT(UART0_PHYS_ADDR, AU1100_UART0_INT), - PORT(UART1_PHYS_ADDR, AU1100_UART1_INT), - PORT(UART3_PHYS_ADDR, AU1100_UART3_INT), -#elif defined(CONFIG_SOC_AU1550) - PORT(UART0_PHYS_ADDR, AU1550_UART0_INT), - PORT(UART1_PHYS_ADDR, AU1550_UART1_INT), - PORT(UART3_PHYS_ADDR, AU1550_UART3_INT), -#elif defined(CONFIG_SOC_AU1200) - PORT(UART0_PHYS_ADDR, AU1200_UART0_INT), - PORT(UART1_PHYS_ADDR, AU1200_UART1_INT), -#endif - { }, +static struct plat_serial8250_port au1x00_uart_data[][4] __initdata = { + [ALCHEMY_CPU_AU1000] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1000_UART0_INT), + PORT(AU1000_UART1_PHYS_ADDR, AU1000_UART1_INT), + PORT(AU1000_UART2_PHYS_ADDR, AU1000_UART2_INT), + PORT(AU1000_UART3_PHYS_ADDR, AU1000_UART3_INT), + }, + [ALCHEMY_CPU_AU1500] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1500_UART0_INT), + PORT(AU1000_UART3_PHYS_ADDR, AU1500_UART3_INT), + }, + [ALCHEMY_CPU_AU1100] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1100_UART0_INT), + PORT(AU1000_UART1_PHYS_ADDR, AU1100_UART1_INT), + PORT(AU1000_UART3_PHYS_ADDR, AU1100_UART3_INT), + }, + [ALCHEMY_CPU_AU1550] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1550_UART0_INT), + PORT(AU1000_UART1_PHYS_ADDR, AU1550_UART1_INT), + PORT(AU1000_UART3_PHYS_ADDR, AU1550_UART3_INT), + }, + [ALCHEMY_CPU_AU1200] = { + PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT), + PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT), + }, }; static struct platform_device au1xx0_uart_device = { .name = "serial8250", .id = PLAT8250_DEV_AU1X00, - .dev = { - .platform_data = au1x00_uart_data, - }, }; +static void __init alchemy_setup_uarts(int ctype) +{ + unsigned int uartclk = get_au1x00_uart_baud_base() * 16; + int s = sizeof(struct plat_serial8250_port); + int c = alchemy_get_uarts(ctype); + struct plat_serial8250_port *ports; + + ports = kzalloc(s * (c + 1), GFP_KERNEL); + if (!ports) { + printk(KERN_INFO "Alchemy: no memory for UART data\n"); + return; + } + memcpy(ports, au1x00_uart_data[ctype], s * c); + au1xx0_uart_device.dev.platform_data = ports; + + /* Fill up uartclk. */ + for (s = 0; s < c; s++) + ports[s].uartclk = uartclk; + if (platform_device_register(&au1xx0_uart_device)) + printk(KERN_INFO "Alchemy: failed to register UARTs\n"); +} + /* OHCI (USB full speed host controller) */ static struct resource au1xxx_usb_ohci_resources[] = { [0] = { @@ -269,8 +283,8 @@ extern struct au1xmmc_platform_data au1xmmc_platdata[2]; static struct resource au1200_mmc0_resources[] = { [0] = { - .start = SD0_PHYS_ADDR, - .end = SD0_PHYS_ADDR + 0x7ffff, + .start = AU1100_SD0_PHYS_ADDR, + .end = AU1100_SD0_PHYS_ADDR + 0xfff, .flags = IORESOURCE_MEM, }, [1] = { @@ -305,8 +319,8 @@ static struct platform_device au1200_mmc0_device = { #ifndef CONFIG_MIPS_DB1200 static struct resource au1200_mmc1_resources[] = { [0] = { - .start = SD1_PHYS_ADDR, - .end = SD1_PHYS_ADDR + 0x7ffff, + .start = AU1100_SD1_PHYS_ADDR, + .end = AU1100_SD1_PHYS_ADDR + 0xfff, .flags = IORESOURCE_MEM, }, [1] = { @@ -359,15 +373,16 @@ static struct platform_device pbdb_smbus_device = { #endif /* Macro to help defining the Ethernet MAC resources */ +#define MAC_RES_COUNT 3 /* MAC regs base, MAC enable reg, MAC INT */ #define MAC_RES(_base, _enable, _irq) \ { \ - .start = CPHYSADDR(_base), \ - .end = CPHYSADDR(_base + 0xffff), \ + .start = _base, \ + .end = _base + 0xffff, \ .flags = IORESOURCE_MEM, \ }, \ { \ - .start = CPHYSADDR(_enable), \ - .end = CPHYSADDR(_enable + 0x3), \ + .start = _enable, \ + .end = _enable + 0x3, \ .flags = IORESOURCE_MEM, \ }, \ { \ @@ -376,19 +391,29 @@ static struct platform_device pbdb_smbus_device = { .flags = IORESOURCE_IRQ \ } -static struct resource au1xxx_eth0_resources[] = { -#if defined(CONFIG_SOC_AU1000) - MAC_RES(AU1000_ETH0_BASE, AU1000_MAC0_ENABLE, AU1000_MAC0_DMA_INT), -#elif defined(CONFIG_SOC_AU1100) - MAC_RES(AU1100_ETH0_BASE, AU1100_MAC0_ENABLE, AU1100_MAC0_DMA_INT), -#elif defined(CONFIG_SOC_AU1550) - MAC_RES(AU1550_ETH0_BASE, AU1550_MAC0_ENABLE, AU1550_MAC0_DMA_INT), -#elif defined(CONFIG_SOC_AU1500) - MAC_RES(AU1500_ETH0_BASE, AU1500_MAC0_ENABLE, AU1500_MAC0_DMA_INT), -#endif +static struct resource au1xxx_eth0_resources[][MAC_RES_COUNT] __initdata = { + [ALCHEMY_CPU_AU1000] = { + MAC_RES(AU1000_MAC0_PHYS_ADDR, + AU1000_MACEN_PHYS_ADDR, + AU1000_MAC0_DMA_INT) + }, + [ALCHEMY_CPU_AU1500] = { + MAC_RES(AU1500_MAC0_PHYS_ADDR, + AU1500_MACEN_PHYS_ADDR, + AU1500_MAC0_DMA_INT) + }, + [ALCHEMY_CPU_AU1100] = { + MAC_RES(AU1000_MAC0_PHYS_ADDR, + AU1000_MACEN_PHYS_ADDR, + AU1100_MAC0_DMA_INT) + }, + [ALCHEMY_CPU_AU1550] = { + MAC_RES(AU1000_MAC0_PHYS_ADDR, + AU1000_MACEN_PHYS_ADDR, + AU1550_MAC0_DMA_INT) + }, }; - static struct au1000_eth_platform_data au1xxx_eth0_platform_data = { .phy1_search_mac0 = 1, }; @@ -396,20 +421,26 @@ static struct au1000_eth_platform_data au1xxx_eth0_platform_data = { static struct platform_device au1xxx_eth0_device = { .name = "au1000-eth", .id = 0, - .num_resources = ARRAY_SIZE(au1xxx_eth0_resources), - .resource = au1xxx_eth0_resources, + .num_resources = MAC_RES_COUNT, .dev.platform_data = &au1xxx_eth0_platform_data, }; -#ifndef CONFIG_SOC_AU1100 -static struct resource au1xxx_eth1_resources[] = { -#if defined(CONFIG_SOC_AU1000) - MAC_RES(AU1000_ETH1_BASE, AU1000_MAC1_ENABLE, AU1000_MAC1_DMA_INT), -#elif defined(CONFIG_SOC_AU1550) - MAC_RES(AU1550_ETH1_BASE, AU1550_MAC1_ENABLE, AU1550_MAC1_DMA_INT), -#elif defined(CONFIG_SOC_AU1500) - MAC_RES(AU1500_ETH1_BASE, AU1500_MAC1_ENABLE, AU1500_MAC1_DMA_INT), -#endif +static struct resource au1xxx_eth1_resources[][MAC_RES_COUNT] __initdata = { + [ALCHEMY_CPU_AU1000] = { + MAC_RES(AU1000_MAC1_PHYS_ADDR, + AU1000_MACEN_PHYS_ADDR + 4, + AU1000_MAC1_DMA_INT) + }, + [ALCHEMY_CPU_AU1500] = { + MAC_RES(AU1500_MAC1_PHYS_ADDR, + AU1500_MACEN_PHYS_ADDR + 4, + AU1500_MAC1_DMA_INT) + }, + [ALCHEMY_CPU_AU1550] = { + MAC_RES(AU1000_MAC1_PHYS_ADDR, + AU1000_MACEN_PHYS_ADDR + 4, + AU1550_MAC1_DMA_INT) + }, }; static struct au1000_eth_platform_data au1xxx_eth1_platform_data = { @@ -419,11 +450,9 @@ static struct au1000_eth_platform_data au1xxx_eth1_platform_data = { static struct platform_device au1xxx_eth1_device = { .name = "au1000-eth", .id = 1, - .num_resources = ARRAY_SIZE(au1xxx_eth1_resources), - .resource = au1xxx_eth1_resources, + .num_resources = MAC_RES_COUNT, .dev.platform_data = &au1xxx_eth1_platform_data, }; -#endif void __init au1xxx_override_eth_cfg(unsigned int port, struct au1000_eth_platform_data *eth_data) @@ -434,15 +463,65 @@ void __init au1xxx_override_eth_cfg(unsigned int port, if (port == 0) memcpy(&au1xxx_eth0_platform_data, eth_data, sizeof(struct au1000_eth_platform_data)); -#ifndef CONFIG_SOC_AU1100 else memcpy(&au1xxx_eth1_platform_data, eth_data, sizeof(struct au1000_eth_platform_data)); -#endif +} + +static void __init alchemy_setup_macs(int ctype) +{ + int ret, i; + unsigned char ethaddr[6]; + struct resource *macres; + + /* Handle 1st MAC */ + if (alchemy_get_macs(ctype) < 1) + return; + + macres = kmalloc(sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL); + if (!macres) { + printk(KERN_INFO "Alchemy: no memory for MAC0 resources\n"); + return; + } + memcpy(macres, au1xxx_eth0_resources[ctype], + sizeof(struct resource) * MAC_RES_COUNT); + au1xxx_eth0_device.resource = macres; + + i = prom_get_ethernet_addr(ethaddr); + if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac)) + memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6); + + ret = platform_device_register(&au1xxx_eth0_device); + if (!ret) + printk(KERN_INFO "Alchemy: failed to register MAC0\n"); + + + /* Handle 2nd MAC */ + if (alchemy_get_macs(ctype) < 2) + return; + + macres = kmalloc(sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL); + if (!macres) { + printk(KERN_INFO "Alchemy: no memory for MAC1 resources\n"); + return; + } + memcpy(macres, au1xxx_eth1_resources[ctype], + sizeof(struct resource) * MAC_RES_COUNT); + au1xxx_eth1_device.resource = macres; + + ethaddr[5] += 1; /* next addr for 2nd MAC */ + if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac)) + memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6); + + /* Register second MAC if enabled in pinfunc */ + if (!(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2)) { + ret = platform_device_register(&au1xxx_eth1_device); + if (ret) + printk(KERN_INFO "Alchemy: failed to register MAC1\n"); + } } static struct platform_device *au1xxx_platform_devices[] __initdata = { - &au1xx0_uart_device, &au1xxx_usb_ohci_device, #ifdef CONFIG_FB_AU1100 &au1100_lcd_device, @@ -460,36 +539,17 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = { #ifdef SMBUS_PSC_BASE &pbdb_smbus_device, #endif - &au1xxx_eth0_device, }; static int __init au1xxx_platform_init(void) { - unsigned int uartclk = get_au1x00_uart_baud_base() * 16; - int err, i; - unsigned char ethaddr[6]; + int err, ctype = alchemy_get_cputype(); - /* Fill up uartclk. */ - for (i = 0; au1x00_uart_data[i].flags; i++) - au1x00_uart_data[i].uartclk = uartclk; - - /* use firmware-provided mac addr if available and necessary */ - i = prom_get_ethernet_addr(ethaddr); - if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac)) - memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6); + alchemy_setup_uarts(ctype); + alchemy_setup_macs(ctype); err = platform_add_devices(au1xxx_platform_devices, ARRAY_SIZE(au1xxx_platform_devices)); -#ifndef CONFIG_SOC_AU1100 - ethaddr[5] += 1; /* next addr for 2nd MAC */ - if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac)) - memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6); - - /* Register second MAC if enabled in pinfunc */ - if (!err && !(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2)) - err = platform_device_register(&au1xxx_eth1_device); -#endif - return err; } diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c index 561e5da..1b887c8 100644 --- a/arch/mips/alchemy/common/setup.c +++ b/arch/mips/alchemy/common/setup.c @@ -52,8 +52,6 @@ void __init plat_mem_setup(void) /* this is faster than wasting cycles trying to approximate it */ preset_lpj = (est_freq >> 1) / HZ; - board_setup(); /* board specific setup */ - if (au1xxx_cpu_needs_config_od()) /* Various early Au1xx0 errata corrected by this */ set_c0_config(1 << 19); /* Set Config[OD] */ @@ -61,6 +59,8 @@ void __init plat_mem_setup(void) /* Clear to obtain best system bus performance */ clear_c0_config(1 << 19); /* Clear Config[OD] */ + board_setup(); /* board specific setup */ + /* IO/MEM resources. */ set_io_port_base(0); ioport_resource.start = IOPORT_RESOURCE_START; diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c index 2aecb2f..d5da6ad 100644 --- a/arch/mips/alchemy/common/time.c +++ b/arch/mips/alchemy/common/time.c @@ -141,8 +141,7 @@ static int __init alchemy_time_init(unsigned int m2int) goto cntr_err; /* register counter1 clocksource and event device */ - clocksource_set_clock(&au1x_counter1_clocksource, 32768); - clocksource_register(&au1x_counter1_clocksource); + clocksource_register_hz(&au1x_counter1_clocksource, 32768); cd->shift = 32; cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift); diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c index 4a89800..1dac4f2 100644 --- a/arch/mips/alchemy/devboards/db1200/setup.c +++ b/arch/mips/alchemy/devboards/db1200/setup.c @@ -23,6 +23,13 @@ void __init board_setup(void) unsigned long freq0, clksrc, div, pfc; unsigned short whoami; + /* Set Config[OD] (disable overlapping bus transaction): + * This gets rid of a _lot_ of spurious interrupts (especially + * wrt. IDE); but incurs ~10% performance hit in some + * cpu-bound applications. + */ + set_c0_config(1 << 19); + bcsr_init(DB1200_BCSR_PHYS_ADDR, DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS); diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c index 05f120f..5c956fe 100644 --- a/arch/mips/alchemy/devboards/db1x00/board_setup.c +++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c @@ -127,13 +127,10 @@ const char *get_system_type(void) void __init board_setup(void) { unsigned long bcsr1, bcsr2; - u32 pin_func; bcsr1 = DB1000_BCSR_PHYS_ADDR; bcsr2 = DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS; - pin_func = 0; - #ifdef CONFIG_MIPS_DB1000 printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n"); #endif @@ -164,12 +161,16 @@ void __init board_setup(void) /* Not valid for Au1550 */ #if defined(CONFIG_IRDA) && \ (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100)) - /* Set IRFIRSEL instead of GPIO15 */ - pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF; - au_writel(pin_func, SYS_PINFUNC); - /* Power off until the driver is in use */ - bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK, - BCSR_RESETS_IRDA_MODE_OFF); + { + u32 pin_func; + + /* Set IRFIRSEL instead of GPIO15 */ + pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF; + au_writel(pin_func, SYS_PINFUNC); + /* Power off until the driver is in use */ + bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK, + BCSR_RESETS_IRDA_MODE_OFF); + } #endif bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */ @@ -177,31 +178,35 @@ void __init board_setup(void) alchemy_gpio1_input_enable(); #ifdef CONFIG_MIPS_MIRAGE - /* GPIO[20] is output */ - alchemy_gpio_direction_output(20, 0); + { + u32 pin_func; - /* Set GPIO[210:208] instead of SSI_0 */ - pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0; + /* GPIO[20] is output */ + alchemy_gpio_direction_output(20, 0); - /* Set GPIO[215:211] for LEDs */ - pin_func |= 5 << 2; + /* Set GPIO[210:208] instead of SSI_0 */ + pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0; - /* Set GPIO[214:213] for more LEDs */ - pin_func |= 5 << 12; + /* Set GPIO[215:211] for LEDs */ + pin_func |= 5 << 2; - /* Set GPIO[207:200] instead of PCMCIA/LCD */ - pin_func |= SYS_PF_LCD | SYS_PF_PC; - au_writel(pin_func, SYS_PINFUNC); + /* Set GPIO[214:213] for more LEDs */ + pin_func |= 5 << 12; - /* - * Enable speaker amplifier. This should - * be part of the audio driver. - */ - alchemy_gpio_direction_output(209, 1); + /* Set GPIO[207:200] instead of PCMCIA/LCD */ + pin_func |= SYS_PF_LCD | SYS_PF_PC; + au_writel(pin_func, SYS_PINFUNC); - pm_power_off = mirage_power_off; - _machine_halt = mirage_power_off; - _machine_restart = (void(*)(char *))mips_softreset; + /* + * Enable speaker amplifier. This should + * be part of the audio driver. + */ + alchemy_gpio_direction_output(209, 1); + + pm_power_off = mirage_power_off; + _machine_halt = mirage_power_off; + _machine_restart = (void(*)(char *))mips_softreset; + } #endif #ifdef CONFIG_MIPS_BOSPORUS diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c index 2d85c4b..e64fdcb 100644 --- a/arch/mips/alchemy/devboards/pb1000/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1000/board_setup.c @@ -65,7 +65,7 @@ void __init board_setup(void) /* Set AUX clock to 12 MHz * 8 = 96 MHz */ au_writel(8, SYS_AUXPLL); - au_writel(0, SYS_PINSTATERD); + alchemy_gpio1_input_enable(); udelay(100); #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c index 83f4621..3b4fa32 100644 --- a/arch/mips/alchemy/devboards/pb1500/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c @@ -56,7 +56,7 @@ void __init board_setup(void) sys_clksrc = sys_freqctrl = pin_func = 0; /* Set AUX clock to 12 MHz * 8 = 96 MHz */ au_writel(8, SYS_AUXPLL); - au_writel(0, SYS_PINSTATERD); + alchemy_gpio1_input_enable(); udelay(100); /* GPIO201 is input for PCMCIA card detect */ diff --git a/arch/mips/alchemy/devboards/prom.c b/arch/mips/alchemy/devboards/prom.c index baeb213..e5306b5 100644 --- a/arch/mips/alchemy/devboards/prom.c +++ b/arch/mips/alchemy/devboards/prom.c @@ -62,5 +62,5 @@ void __init prom_init(void) void prom_putchar(unsigned char c) { - alchemy_uart_putchar(UART0_PHYS_ADDR, c); + alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); } diff --git a/arch/mips/alchemy/gpr/board_setup.c b/arch/mips/alchemy/gpr/board_setup.c index ad2e3f1..5f8f069 100644 --- a/arch/mips/alchemy/gpr/board_setup.c +++ b/arch/mips/alchemy/gpr/board_setup.c @@ -36,9 +36,6 @@ #include <prom.h> -#define UART1_ADDR KSEG1ADDR(UART1_PHYS_ADDR) -#define UART3_ADDR KSEG1ADDR(UART3_PHYS_ADDR) - char irq_tab_alchemy[][5] __initdata = { [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, }; @@ -67,18 +64,15 @@ static void gpr_power_off(void) void __init board_setup(void) { - printk(KERN_INFO "Tarpeze ITS GPR board\n"); + printk(KERN_INFO "Trapeze ITS GPR board\n"); pm_power_off = gpr_power_off; _machine_halt = gpr_power_off; _machine_restart = gpr_reset; - /* Enable UART3 */ - au_writel(0x1, UART3_ADDR + UART_MOD_CNTRL);/* clock enable (CE) */ - au_writel(0x3, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */ - /* Enable UART1 */ - au_writel(0x1, UART1_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */ - au_writel(0x3, UART1_ADDR + UART_MOD_CNTRL); /* CE and "enable" */ + /* Enable UART1/3 */ + alchemy_uart_enable(AU1000_UART3_PHYS_ADDR); + alchemy_uart_enable(AU1000_UART1_PHYS_ADDR); /* Take away Reset of UMTS-card */ alchemy_gpio_direction_output(215, 1); diff --git a/arch/mips/alchemy/gpr/init.c b/arch/mips/alchemy/gpr/init.c index f044f4c54..229aafa 100644 --- a/arch/mips/alchemy/gpr/init.c +++ b/arch/mips/alchemy/gpr/init.c @@ -59,5 +59,5 @@ void __init prom_init(void) void prom_putchar(unsigned char c) { - alchemy_uart_putchar(UART0_PHYS_ADDR, c); + alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); } diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c index cf436ab..3ae984c 100644 --- a/arch/mips/alchemy/mtx-1/board_setup.c +++ b/arch/mips/alchemy/mtx-1/board_setup.c @@ -87,7 +87,7 @@ void __init board_setup(void) au_writel(SYS_PF_NI2, SYS_PINFUNC); /* Initialize GPIO */ - au_writel(0xFFFFFFFF, SYS_TRIOUTCLR); + au_writel(~0, KSEG1ADDR(AU1000_SYS_PHYS_ADDR) + SYS_TRIOUTCLR); alchemy_gpio_direction_output(0, 0); /* Disable M66EN (PCI 66MHz) */ alchemy_gpio_direction_output(3, 1); /* Disable PCI CLKRUN# */ alchemy_gpio_direction_output(1, 1); /* Enable EXT_IO3 */ diff --git a/arch/mips/alchemy/mtx-1/init.c b/arch/mips/alchemy/mtx-1/init.c index f8d2557..2e81cc7 100644 --- a/arch/mips/alchemy/mtx-1/init.c +++ b/arch/mips/alchemy/mtx-1/init.c @@ -62,5 +62,5 @@ void __init prom_init(void) void prom_putchar(unsigned char c) { - alchemy_uart_putchar(UART0_PHYS_ADDR, c); + alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); } diff --git a/arch/mips/alchemy/mtx-1/platform.c b/arch/mips/alchemy/mtx-1/platform.c index 956f946..55628e3 100644 --- a/arch/mips/alchemy/mtx-1/platform.c +++ b/arch/mips/alchemy/mtx-1/platform.c @@ -53,8 +53,8 @@ static struct platform_device mtx1_button = { static struct resource mtx1_wdt_res[] = { [0] = { - .start = 15, - .end = 15, + .start = 215, + .end = 215, .name = "mtx1-wdt-gpio", .flags = IORESOURCE_IRQ, } diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c index febfb0fb..81e57fa 100644 --- a/arch/mips/alchemy/xxs1500/board_setup.c +++ b/arch/mips/alchemy/xxs1500/board_setup.c @@ -66,13 +66,10 @@ void __init board_setup(void) au_writel(pin_func, SYS_PINFUNC); /* Enable UART */ - au_writel(0x01, UART3_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */ - mdelay(10); - au_writel(0x03, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */ - mdelay(10); - - /* Enable DTR = USB power up */ - au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */ + alchemy_uart_enable(AU1000_UART3_PHYS_ADDR); + /* Enable DTR (MCR bit 0) = USB power up */ + __raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18)); + wmb(); #ifdef CONFIG_PCI #if defined(__MIPSEB__) diff --git a/arch/mips/alchemy/xxs1500/init.c b/arch/mips/alchemy/xxs1500/init.c index 15125c2..0ee02cf 100644 --- a/arch/mips/alchemy/xxs1500/init.c +++ b/arch/mips/alchemy/xxs1500/init.c @@ -51,14 +51,13 @@ void __init prom_init(void) prom_init_cmdline(); memsize_str = prom_getenv("memsize"); - if (!memsize_str) + if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize)) memsize = 0x04000000; - else - strict_strtoul(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); } void prom_putchar(unsigned char c) { - alchemy_uart_putchar(UART0_PHYS_ADDR, c); + alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); } diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c index 425dfa5..bb571bc 100644 --- a/arch/mips/ar7/gpio.c +++ b/arch/mips/ar7/gpio.c @@ -325,9 +325,7 @@ int __init ar7_gpio_init(void) size = 0x1f; } - gpch->regs = ioremap_nocache(AR7_REGS_GPIO, - AR7_REGS_GPIO + 0x10); - + gpch->regs = ioremap_nocache(AR7_REGS_GPIO, size); if (!gpch->regs) { printk(KERN_ERR "%s: failed to ioremap regs\n", gpch->chip.label); diff --git a/arch/mips/bcm47xx/nvram.c b/arch/mips/bcm47xx/nvram.c index e5b6615..54db815 100644 --- a/arch/mips/bcm47xx/nvram.c +++ b/arch/mips/bcm47xx/nvram.c @@ -3,6 +3,7 @@ * * Copyright (C) 2005 Broadcom Corporation * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2010-2011 Hauke Mehrtens <hauke@hauke-m.de> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -23,7 +24,7 @@ static char nvram_buf[NVRAM_SPACE]; /* Probe for NVRAM header */ -static void __init early_nvram_init(void) +static void early_nvram_init(void) { struct ssb_mipscore *mcore = &ssb_bcm47xx.mipscore; struct nvram_header *header; diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c index c95f90b..73b529b 100644 --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c @@ -3,6 +3,7 @@ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> * Copyright (C) 2006 Michael Buesch <mb@bu3sch.de> * Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org> + * Copyright (C) 2010-2011 Hauke Mehrtens <hauke@hauke-m.de> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -57,10 +58,49 @@ static void bcm47xx_machine_halt(void) } #define READ_FROM_NVRAM(_outvar, name, buf) \ - if (nvram_getenv(name, buf, sizeof(buf)) >= 0)\ + if (nvram_getprefix(prefix, name, buf, sizeof(buf)) >= 0)\ sprom->_outvar = simple_strtoul(buf, NULL, 0); -static void bcm47xx_fill_sprom(struct ssb_sprom *sprom) +#define READ_FROM_NVRAM2(_outvar, name1, name2, buf) \ + if (nvram_getprefix(prefix, name1, buf, sizeof(buf)) >= 0 || \ + nvram_getprefix(prefix, name2, buf, sizeof(buf)) >= 0)\ + sprom->_outvar = simple_strtoul(buf, NULL, 0); + +static inline int nvram_getprefix(const char *prefix, char *name, + char *buf, int len) +{ + if (prefix) { + char key[100]; + + snprintf(key, sizeof(key), "%s%s", prefix, name); + return nvram_getenv(key, buf, len); + } + + return nvram_getenv(name, buf, len); +} + +static u32 nvram_getu32(const char *name, char *buf, int len) +{ + int rv; + char key[100]; + u16 var0, var1; + + snprintf(key, sizeof(key), "%s0", name); + rv = nvram_getenv(key, buf, len); + /* return 0 here so this looks like unset */ + if (rv < 0) + return 0; + var0 = simple_strtoul(buf, NULL, 0); + + snprintf(key, sizeof(key), "%s1", name); + rv = nvram_getenv(key, buf, len); + if (rv < 0) + return 0; + var1 = simple_strtoul(buf, NULL, 0); + return var1 << 16 | var0; +} + +static void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix) { char buf[100]; u32 boardflags; @@ -69,11 +109,12 @@ static void bcm47xx_fill_sprom(struct ssb_sprom *sprom) sprom->revision = 1; /* Fallback: Old hardware does not define this. */ READ_FROM_NVRAM(revision, "sromrev", buf); - if (nvram_getenv("il0macaddr", buf, sizeof(buf)) >= 0) + if (nvram_getprefix(prefix, "il0macaddr", buf, sizeof(buf)) >= 0 || + nvram_getprefix(prefix, "macaddr", buf, sizeof(buf)) >= 0) nvram_parse_macaddr(buf, sprom->il0mac); - if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0) + if (nvram_getprefix(prefix, "et0macaddr", buf, sizeof(buf)) >= 0) nvram_parse_macaddr(buf, sprom->et0mac); - if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0) + if (nvram_getprefix(prefix, "et1macaddr", buf, sizeof(buf)) >= 0) nvram_parse_macaddr(buf, sprom->et1mac); READ_FROM_NVRAM(et0phyaddr, "et0phyaddr", buf); READ_FROM_NVRAM(et1phyaddr, "et1phyaddr", buf); @@ -95,20 +136,36 @@ static void bcm47xx_fill_sprom(struct ssb_sprom *sprom) READ_FROM_NVRAM(pa1hib0, "pa1hib0", buf); READ_FROM_NVRAM(pa1hib2, "pa1hib1", buf); READ_FROM_NVRAM(pa1hib1, "pa1hib2", buf); - READ_FROM_NVRAM(gpio0, "wl0gpio0", buf); - READ_FROM_NVRAM(gpio1, "wl0gpio1", buf); - READ_FROM_NVRAM(gpio2, "wl0gpio2", buf); - READ_FROM_NVRAM(gpio3, "wl0gpio3", buf); - READ_FROM_NVRAM(maxpwr_bg, "pa0maxpwr", buf); - READ_FROM_NVRAM(maxpwr_al, "pa1lomaxpwr", buf); - READ_FROM_NVRAM(maxpwr_a, "pa1maxpwr", buf); - READ_FROM_NVRAM(maxpwr_ah, "pa1himaxpwr", buf); - READ_FROM_NVRAM(itssi_a, "pa1itssit", buf); - READ_FROM_NVRAM(itssi_bg, "pa0itssit", buf); + READ_FROM_NVRAM2(gpio0, "ledbh0", "wl0gpio0", buf); + READ_FROM_NVRAM2(gpio1, "ledbh1", "wl0gpio1", buf); + READ_FROM_NVRAM2(gpio2, "ledbh2", "wl0gpio2", buf); + READ_FROM_NVRAM2(gpio3, "ledbh3", "wl0gpio3", buf); + READ_FROM_NVRAM2(maxpwr_bg, "maxp2ga0", "pa0maxpwr", buf); + READ_FROM_NVRAM2(maxpwr_al, "maxp5gla0", "pa1lomaxpwr", buf); + READ_FROM_NVRAM2(maxpwr_a, "maxp5ga0", "pa1maxpwr", buf); + READ_FROM_NVRAM2(maxpwr_ah, "maxp5gha0", "pa1himaxpwr", buf); + READ_FROM_NVRAM2(itssi_bg, "itt5ga0", "pa0itssit", buf); + READ_FROM_NVRAM2(itssi_a, "itt2ga0", "pa1itssit", buf); READ_FROM_NVRAM(tri2g, "tri2g", buf); READ_FROM_NVRAM(tri5gl, "tri5gl", buf); READ_FROM_NVRAM(tri5g, "tri5g", buf); READ_FROM_NVRAM(tri5gh, "tri5gh", buf); + READ_FROM_NVRAM(txpid2g[0], "txpid2ga0", buf); + READ_FROM_NVRAM(txpid2g[1], "txpid2ga1", buf); + READ_FROM_NVRAM(txpid2g[2], "txpid2ga2", buf); + READ_FROM_NVRAM(txpid2g[3], "txpid2ga3", buf); + READ_FROM_NVRAM(txpid5g[0], "txpid5ga0", buf); + READ_FROM_NVRAM(txpid5g[1], "txpid5ga1", buf); + READ_FROM_NVRAM(txpid5g[2], "txpid5ga2", buf); + READ_FROM_NVRAM(txpid5g[3], "txpid5ga3", buf); + READ_FROM_NVRAM(txpid5gl[0], "txpid5gla0", buf); + READ_FROM_NVRAM(txpid5gl[1], "txpid5gla1", buf); + READ_FROM_NVRAM(txpid5gl[2], "txpid5gla2", buf); + READ_FROM_NVRAM(txpid5gl[3], "txpid5gla3", buf); + READ_FROM_NVRAM(txpid5gh[0], "txpid5gha0", buf); + READ_FROM_NVRAM(txpid5gh[1], "txpid5gha1", buf); + READ_FROM_NVRAM(txpid5gh[2], "txpid5gha2", buf); + READ_FROM_NVRAM(txpid5gh[3], "txpid5gha3", buf); READ_FROM_NVRAM(rxpo2g, "rxpo2g", buf); READ_FROM_NVRAM(rxpo5g, "rxpo5g", buf); READ_FROM_NVRAM(rssisav2g, "rssisav2g", buf); @@ -120,19 +177,27 @@ static void bcm47xx_fill_sprom(struct ssb_sprom *sprom) READ_FROM_NVRAM(rssismf5g, "rssismf5g", buf); READ_FROM_NVRAM(bxa5g, "bxa5g", buf); READ_FROM_NVRAM(cck2gpo, "cck2gpo", buf); - READ_FROM_NVRAM(ofdm2gpo, "ofdm2gpo", buf); - READ_FROM_NVRAM(ofdm5glpo, "ofdm5glpo", buf); - READ_FROM_NVRAM(ofdm5gpo, "ofdm5gpo", buf); - READ_FROM_NVRAM(ofdm5ghpo, "ofdm5ghpo", buf); - if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0) { + sprom->ofdm2gpo = nvram_getu32("ofdm2gpo", buf, sizeof(buf)); + sprom->ofdm5glpo = nvram_getu32("ofdm5glpo", buf, sizeof(buf)); + sprom->ofdm5gpo = nvram_getu32("ofdm5gpo", buf, sizeof(buf)); + sprom->ofdm5ghpo = nvram_getu32("ofdm5ghpo", buf, sizeof(buf)); + + READ_FROM_NVRAM(antenna_gain.ghz24.a0, "ag0", buf); + READ_FROM_NVRAM(antenna_gain.ghz24.a1, "ag1", buf); + READ_FROM_NVRAM(antenna_gain.ghz24.a2, "ag2", buf); + READ_FROM_NVRAM(antenna_gain.ghz24.a3, "ag3", buf); + memcpy(&sprom->antenna_gain.ghz5, &sprom->antenna_gain.ghz24, + sizeof(sprom->antenna_gain.ghz5)); + + if (nvram_getprefix(prefix, "boardflags", buf, sizeof(buf)) >= 0) { boardflags = simple_strtoul(buf, NULL, 0); if (boardflags) { sprom->boardflags_lo = (boardflags & 0x0000FFFFU); sprom->boardflags_hi = (boardflags & 0xFFFF0000U) >> 16; } } - if (nvram_getenv("boardflags2", buf, sizeof(buf)) >= 0) { + if (nvram_getprefix(prefix, "boardflags2", buf, sizeof(buf)) >= 0) { boardflags = simple_strtoul(buf, NULL, 0); if (boardflags) { sprom->boardflags2_lo = (boardflags & 0x0000FFFFU); @@ -141,6 +206,22 @@ static void bcm47xx_fill_sprom(struct ssb_sprom *sprom) } } +int bcm47xx_get_sprom(struct ssb_bus *bus, struct ssb_sprom *out) +{ + char prefix[10]; + + if (bus->bustype == SSB_BUSTYPE_PCI) { + snprintf(prefix, sizeof(prefix), "pci/%u/%u/", + bus->host_pci->bus->number + 1, + PCI_SLOT(bus->host_pci->devfn)); + bcm47xx_fill_sprom(out, prefix); + return 0; + } else { + printk(KERN_WARNING "bcm47xx: unable to fill SPROM for given bustype.\n"); + return -EINVAL; + } +} + static int bcm47xx_get_invariants(struct ssb_bus *bus, struct ssb_init_invariants *iv) { @@ -158,7 +239,7 @@ static int bcm47xx_get_invariants(struct ssb_bus *bus, if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0) iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0); - bcm47xx_fill_sprom(&iv->sprom); + bcm47xx_fill_sprom(&iv->sprom, NULL); if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0) iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10); @@ -172,6 +253,11 @@ void __init plat_mem_setup(void) char buf[100]; struct ssb_mipscore *mcore; + err = ssb_arch_register_fallback_sprom(&bcm47xx_get_sprom); + if (err) + printk(KERN_WARNING "bcm47xx: someone else already registered" + " a ssb SPROM callback handler (err %d)\n", err); + err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE, bcm47xx_get_invariants); if (err) diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c index 8dba8cf..40b223b 100644 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -643,6 +643,17 @@ static struct ssb_sprom bcm63xx_sprom = { .boardflags_lo = 0x2848, .boardflags_hi = 0x0000, }; + +int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out) +{ + if (bus->bustype == SSB_BUSTYPE_PCI) { + memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom)); + return 0; + } else { + printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n"); + return -EINVAL; + } +} #endif /* @@ -793,8 +804,9 @@ void __init board_prom_init(void) if (!board_get_mac_address(bcm63xx_sprom.il0mac)) { memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN); memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN); - if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0) - printk(KERN_ERR "failed to register fallback SPROM\n"); + if (ssb_arch_register_fallback_sprom( + &bcm63xx_get_fallback_sprom) < 0) + printk(KERN_ERR PFX "failed to register fallback SPROM\n"); } #endif } diff --git a/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c b/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c index 88c9d963..9a62436 100644 --- a/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c +++ b/arch/mips/boot/compressed/calc_vmlinuz_load_addr.c @@ -16,8 +16,8 @@ int main(int argc, char *argv[]) { + unsigned long long vmlinux_size, vmlinux_load_addr, vmlinuz_load_addr; struct stat sb; - uint64_t vmlinux_size, vmlinux_load_addr, vmlinuz_load_addr; if (argc != 3) { fprintf(stderr, "Usage: %s <pathname> <vmlinux_load_addr>\n", diff --git a/arch/mips/boot/compressed/uart-alchemy.c b/arch/mips/boot/compressed/uart-alchemy.c index 1bff22f..eb063e6 100644 --- a/arch/mips/boot/compressed/uart-alchemy.c +++ b/arch/mips/boot/compressed/uart-alchemy.c @@ -3,5 +3,5 @@ void putc(char c) { /* all current (Jan. 2010) in-kernel boards */ - alchemy_uart_putchar(UART0_PHYS_ADDR, c); + alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c); } diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig index caae228..cad555e 100644 --- a/arch/mips/cavium-octeon/Kconfig +++ b/arch/mips/cavium-octeon/Kconfig @@ -1,11 +1,7 @@ -config CAVIUM_OCTEON_SPECIFIC_OPTIONS - bool "Enable Octeon specific options" - depends on CPU_CAVIUM_OCTEON - default "y" +if CPU_CAVIUM_OCTEON config CAVIUM_CN63XXP1 bool "Enable CN63XXP1 errata worarounds" - depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS default "n" help The CN63XXP1 chip requires build time workarounds to @@ -16,7 +12,6 @@ config CAVIUM_CN63XXP1 config CAVIUM_OCTEON_2ND_KERNEL bool "Build the kernel to be used as a 2nd kernel on the same chip" - depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS default "n" help This option configures this kernel to be linked at a different @@ -26,7 +21,6 @@ config CAVIUM_OCTEON_2ND_KERNEL config CAVIUM_OCTEON_HW_FIX_UNALIGNED bool "Enable hardware fixups of unaligned loads and stores" - depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS default "y" help Configure the Octeon hardware to automatically fix unaligned loads @@ -38,7 +32,6 @@ config CAVIUM_OCTEON_HW_FIX_UNALIGNED config CAVIUM_OCTEON_CVMSEG_SIZE int "Number of L1 cache lines reserved for CVMSEG memory" - depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS range 0 54 default 1 help @@ -50,7 +43,6 @@ config CAVIUM_OCTEON_CVMSEG_SIZE config CAVIUM_OCTEON_LOCK_L2 bool "Lock often used kernel code in the L2" - depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS default "y" help Enable locking parts of the kernel into the L2 cache. @@ -93,7 +85,6 @@ config CAVIUM_OCTEON_LOCK_L2_MEMCPY config ARCH_SPARSEMEM_ENABLE def_bool y select SPARSEMEM_STATIC - depends on CPU_CAVIUM_OCTEON config CAVIUM_OCTEON_HELPER def_bool y @@ -107,6 +98,8 @@ config NEED_SG_DMA_LENGTH config SWIOTLB def_bool y - depends on CPU_CAVIUM_OCTEON select IOMMU_HELPER select NEED_SG_DMA_LENGTH + + +endif # CPU_CAVIUM_OCTEON diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c index 26bf711..29d56af 100644 --- a/arch/mips/cavium-octeon/csrc-octeon.c +++ b/arch/mips/cavium-octeon/csrc-octeon.c @@ -105,8 +105,7 @@ unsigned long long notrace sched_clock(void) void __init plat_time_init(void) { clocksource_mips.rating = 300; - clocksource_set_clock(&clocksource_mips, octeon_get_clock_rate()); - clocksource_register(&clocksource_mips); + clocksource_register_hz(&clocksource_mips, octeon_get_clock_rate()); } static u64 octeon_udelay_factor; diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index 0707fae..2d9028f 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -288,7 +288,6 @@ void octeon_user_io_init(void) union octeon_cvmemctl cvmmemctl; union cvmx_iob_fau_timeout fau_timeout; union cvmx_pow_nw_tim nm_tim; - uint64_t cvmctl; /* Get the current settings for CP0_CVMMEMCTL_REG */ cvmmemctl.u64 = read_c0_cvmmemctl(); @@ -392,12 +391,6 @@ void octeon_user_io_init(void) CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE, CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE * 128); - /* Move the performance counter interrupts to IRQ 6 */ - cvmctl = read_c0_cvmctl(); - cvmctl &= ~(7 << 7); - cvmctl |= 6 << 7; - write_c0_cvmctl(cvmctl); - /* Set a default for the hardware timeouts */ fau_timeout.u64 = 0; fau_timeout.s.tout_val = 0xfff; diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c index ba78b21..8b60642 100644 --- a/arch/mips/cavium-octeon/smp.c +++ b/arch/mips/cavium-octeon/smp.c @@ -37,13 +37,15 @@ static irqreturn_t mailbox_interrupt(int irq, void *dev_id) uint64_t action; /* Load the mailbox register to figure out what we're supposed to do */ - action = cvmx_read_csr(CVMX_CIU_MBOX_CLRX(coreid)); + action = cvmx_read_csr(CVMX_CIU_MBOX_CLRX(coreid)) & 0xffff; /* Clear the mailbox to clear the interrupt */ cvmx_write_csr(CVMX_CIU_MBOX_CLRX(coreid), action); if (action & SMP_CALL_FUNCTION) smp_call_function_interrupt(); + if (action & SMP_RESCHEDULE_YOURSELF) + scheduler_ipi(); /* Check if we've been told to flush the icache */ if (action & SMP_ICACHE_FLUSH) @@ -200,16 +202,15 @@ void octeon_prepare_cpus(unsigned int max_cpus) if (labi->labi_signature != LABI_SIGNATURE) panic("The bootloader version on this board is incorrect."); #endif - - cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffffffff); + /* + * Only the low order mailbox bits are used for IPIs, leave + * the other bits alone. + */ + cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffff); if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_DISABLED, - "mailbox0", mailbox_interrupt)) { + "SMP-IPI", mailbox_interrupt)) { panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n"); } - if (request_irq(OCTEON_IRQ_MBOX1, mailbox_interrupt, IRQF_DISABLED, - "mailbox1", mailbox_interrupt)) { - panic("Cannot request_irq(OCTEON_IRQ_MBOX1)\n"); - } } /** diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig index 167c1d0..b6acd2f 100644 --- a/arch/mips/configs/lemote2f_defconfig +++ b/arch/mips/configs/lemote2f_defconfig @@ -86,8 +86,8 @@ CONFIG_NET_SCHED=y CONFIG_NET_EMATCH=y CONFIG_NET_CLS_ACT=y CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m @@ -329,7 +329,7 @@ CONFIG_USB_LED=m CONFIG_USB_GADGET=m CONFIG_USB_GADGET_M66592=y CONFIG_MMC=m -CONFIG_LEDS_CLASS=m +CONFIG_LEDS_CLASS=y CONFIG_STAGING=y # CONFIG_STAGING_EXCLUDE_BUILD is not set CONFIG_FB_SM7XX=y diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 7270f31..5527abb 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -374,7 +374,7 @@ CONFIG_FB_CIRRUS=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_HID=m -CONFIG_LEDS_CLASS=m +CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_IDE_DISK=y CONFIG_LEDS_TRIGGER_HEARTBEAT=m diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index a97a42c6..37862b2 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -225,8 +225,8 @@ CONFIG_TOSHIBA_FIR=m CONFIG_VLSI_FIR=m CONFIG_MCS_FIR=m CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m diff --git a/arch/mips/configs/nlm_xlr_defconfig b/arch/mips/configs/nlm_xlr_defconfig new file mode 100644 index 0000000..e4b399f --- /dev/null +++ b/arch/mips/configs/nlm_xlr_defconfig @@ -0,0 +1,574 @@ +CONFIG_NLM_XLR_BOARD=y +CONFIG_HIGHMEM=y +CONFIG_KSM=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 +CONFIG_SMP=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT_VOLUNTARY=y +CONFIG_KEXEC=y +CONFIG_EXPERIMENTAL=y +CONFIG_CROSS_COMPILE="mips64-unknown-linux-gnu-" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_AUDIT=y +CONFIG_NAMESPACES=y +CONFIG_SCHED_AUTOGROUP=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="usr/dev_file_list usr/rootfs" +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_INITRAMFS_COMPRESSION_GZIP=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EXPERT=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_ELF_CORE is not set +# CONFIG_PCSPKR_PLATFORM is not set +# CONFIG_PERF_EVENTS is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_PROFILING=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLK_DEV_INTEGRITY=y +CONFIG_BINFMT_MISC=m +CONFIG_PM_RUNTIME=y +CONFIG_PM_DEBUG=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_NET_IPIP=m +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +CONFIG_TCP_MD5SIG=y +CONFIG_IPV6=y +CONFIG_IPV6_PRIVACY=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_NETLABEL=y +CONFIG_NETFILTER=y +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m +CONFIG_IP_VS_FTP=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_SECURITY=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +CONFIG_IP6_NF_SECURITY=m +CONFIG_DECNET_NF_GRABULATOR=m +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_IP6=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_ULOG=m +CONFIG_BRIDGE_EBT_NFLOG=m +CONFIG_IP_DCCP=m +CONFIG_RDS=m +CONFIG_RDS_TCP=m +CONFIG_TIPC=m +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +CONFIG_ATM_LANE=m +CONFIG_ATM_MPOA=m +CONFIG_ATM_BR2684=m +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_DECNET=m +CONFIG_LLC2=m +CONFIG_IPX=m +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=m +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_IPDDP_DECAP=y +CONFIG_X25=m +CONFIG_LAPB=m +CONFIG_ECONET=m +CONFIG_ECONET_AUNUDP=y +CONFIG_ECONET_NATIVE=y +CONFIG_WAN_ROUTER=m +CONFIG_PHONET=m +CONFIG_IEEE802154=m +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_NAT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m +CONFIG_DCB=y +CONFIG_NET_PKTGEN=m +# CONFIG_WIRELESS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +CONFIG_CONNECTOR=y +CONFIG_MTD=m +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_OSD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_CDROM_PKTCDVD=y +CONFIG_MISC_DEVICES=y +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_TGT=m +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=y +CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_SPI_ATTRS=m +CONFIG_SCSI_FC_TGT_ATTRS=y +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_SRP_TGT_ATTRS=y +CONFIG_ISCSI_TCP=m +CONFIG_LIBFCOE=m +CONFIG_SCSI_DEBUG=m +CONFIG_SCSI_DH=y +CONFIG_SCSI_DH_RDAC=m +CONFIG_SCSI_DH_HP_SW=m +CONFIG_SCSI_DH_EMC=m +CONFIG_SCSI_DH_ALUA=m +CONFIG_SCSI_OSD_INITIATOR=m +CONFIG_SCSI_OSD_ULD=m +# CONFIG_INPUT_MOUSEDEV is not set +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_EVBUG=m +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=m +CONFIG_SERIO_LIBPS2=y +CONFIG_SERIO_RAW=m +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +CONFIG_LEGACY_PTY_COUNT=0 +CONFIG_SERIAL_NONSTANDARD=y +CONFIG_N_HDLC=m +# CONFIG_DEVKMEM is not set +CONFIG_STALDRV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=48 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_TIMERIOMEM=m +CONFIG_RAW_DRIVER=m +# CONFIG_HWMON is not set +# CONFIG_VGA_CONSOLE is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_UIO=y +CONFIG_UIO_PDRV=m +CONFIG_UIO_PDRV_GENIRQ=m +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_DLM=y +CONFIG_OCFS2_FS=m +CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS_POSIX_ACL=y +CONFIG_NILFS2_FS=m +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QFMT_V1=m +CONFIG_QFMT_V2=m +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=y +CONFIG_CUSE=m +CONFIG_FSCACHE=m +CONFIG_FSCACHE_STATS=y +CONFIG_FSCACHE_HISTOGRAM=y +CONFIG_CACHEFILES=m +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_NTFS_FS=m +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_CONFIGFS_FS=y +CONFIG_ADFS_FS=m +CONFIG_AFFS_FS=m +CONFIG_ECRYPT_FS=y +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +CONFIG_BEFS_FS=m +CONFIG_BFS_FS=m +CONFIG_EFS_FS=m +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +CONFIG_VXFS_FS=m +CONFIG_MINIX_FS=m +CONFIG_OMFS_FS=m +CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_ROMFS_FS=m +CONFIG_SYSV_FS=m +CONFIG_UFS_FS=m +CONFIG_EXOFS_FS=m +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_FSCACHE=y +CONFIG_NFSD=m +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_CIFS=m +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_UPCALL=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +CONFIG_CIFS_DFS_UPCALL=y +CONFIG_CIFS_EXPERIMENTAL=y +CONFIG_NCP_FS=m +CONFIG_NCPFS_PACKET_SIGNING=y +CONFIG_NCPFS_IOCTL_LOCKING=y +CONFIG_NCPFS_STRONG=y +CONFIG_NCPFS_NFS_NS=y +CONFIG_NCPFS_OS2_NS=y +CONFIG_NCPFS_NLS=y +CONFIG_NCPFS_EXTRAS=y +CONFIG_CODA_FS=m +CONFIG_AFS_FS=m +CONFIG_PARTITION_ADVANCED=y +CONFIG_ACORN_PARTITION=y +CONFIG_ACORN_PARTITION_ICS=y +CONFIG_ACORN_PARTITION_RISCIX=y +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y +CONFIG_ATARI_PARTITION=y +CONFIG_MAC_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_LDM_PARTITION=y +CONFIG_SGI_PARTITION=y +CONFIG_ULTRIX_PARTITION=y +CONFIG_SUN_PARTITION=y +CONFIG_KARMA_PARTITION=y +CONFIG_EFI_PARTITION=y +CONFIG_SYSV68_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_PRINTK_TIME=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_UNUSED_SYMBOLS=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_SCHED_TRACER=y +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_KGDB=y +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK=y +CONFIG_LSM_MMAP_MIN_ADDR=0 +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_SECURITY_SMACK=y +CONFIG_SECURITY_TOMOYO=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_ZLIB=m +CONFIG_CRYPTO_LZO=m +CONFIG_CRC_CCITT=m +CONFIG_CRC7=m diff --git a/arch/mips/include/asm/cache.h b/arch/mips/include/asm/cache.h index 650ac9b..b4db69f 100644 --- a/arch/mips/include/asm/cache.h +++ b/arch/mips/include/asm/cache.h @@ -17,6 +17,6 @@ #define SMP_CACHE_SHIFT L1_CACHE_SHIFT #define SMP_CACHE_BYTES L1_CACHE_BYTES -#define __read_mostly __attribute__((__section__(".data.read_mostly"))) +#define __read_mostly __attribute__((__section__(".data..read_mostly"))) #endif /* _ASM_CACHE_H */ diff --git a/arch/mips/include/asm/cevt-r4k.h b/arch/mips/include/asm/cevt-r4k.h index fa4328f..65f9bdd 100644 --- a/arch/mips/include/asm/cevt-r4k.h +++ b/arch/mips/include/asm/cevt-r4k.h @@ -14,6 +14,9 @@ #ifndef __ASM_CEVT_R4K_H #define __ASM_CEVT_R4K_H +#include <linux/clockchips.h> +#include <asm/time.h> + DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device); void mips_event_handler(struct clock_event_device *dev); diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h index 8687753..34c0d3c 100644 --- a/arch/mips/include/asm/cpu.h +++ b/arch/mips/include/asm/cpu.h @@ -33,6 +33,7 @@ #define PRID_COMP_TOSHIBA 0x070000 #define PRID_COMP_LSI 0x080000 #define PRID_COMP_LEXRA 0x0b0000 +#define PRID_COMP_NETLOGIC 0x0c0000 #define PRID_COMP_CAVIUM 0x0d0000 #define PRID_COMP_INGENIC 0xd00000 @@ -142,6 +143,31 @@ #define PRID_IMP_JZRISC 0x0200 /* + * These are the PRID's for when 23:16 == PRID_COMP_NETLOGIC + */ +#define PRID_IMP_NETLOGIC_XLR732 0x0000 +#define PRID_IMP_NETLOGIC_XLR716 0x0200 +#define PRID_IMP_NETLOGIC_XLR532 0x0900 +#define PRID_IMP_NETLOGIC_XLR308 0x0600 +#define PRID_IMP_NETLOGIC_XLR532C 0x0800 +#define PRID_IMP_NETLOGIC_XLR516C 0x0a00 +#define PRID_IMP_NETLOGIC_XLR508C 0x0b00 +#define PRID_IMP_NETLOGIC_XLR308C 0x0f00 +#define PRID_IMP_NETLOGIC_XLS608 0x8000 +#define PRID_IMP_NETLOGIC_XLS408 0x8800 +#define PRID_IMP_NETLOGIC_XLS404 0x8c00 +#define PRID_IMP_NETLOGIC_XLS208 0x8e00 +#define PRID_IMP_NETLOGIC_XLS204 0x8f00 +#define PRID_IMP_NETLOGIC_XLS108 0xce00 +#define PRID_IMP_NETLOGIC_XLS104 0xcf00 +#define PRID_IMP_NETLOGIC_XLS616B 0x4000 +#define PRID_IMP_NETLOGIC_XLS608B 0x4a00 +#define PRID_IMP_NETLOGIC_XLS416B 0x4400 +#define PRID_IMP_NETLOGIC_XLS412B 0x4c00 +#define PRID_IMP_NETLOGIC_XLS408B 0x4e00 +#define PRID_IMP_NETLOGIC_XLS404B 0x4f00 + +/* * Definitions for 7:0 on legacy processors */ @@ -234,6 +260,7 @@ enum cpu_type_enum { */ CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2, CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, CPU_CAVIUM_OCTEON2, + CPU_XLR, CPU_LAST }; diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h index 655f849..7aa37dd 100644 --- a/arch/mips/include/asm/dma-mapping.h +++ b/arch/mips/include/asm/dma-mapping.h @@ -5,7 +5,9 @@ #include <asm/cache.h> #include <asm-generic/dma-coherent.h> +#ifndef CONFIG_SGI_IP27 /* Kludge to fix 2.6.39 build for IP27 */ #include <dma-coherence.h> +#endif extern struct dma_map_ops *mips_dma_map_ops; diff --git a/arch/mips/include/asm/hugetlb.h b/arch/mips/include/asm/hugetlb.h index f5e85601..c565b7c 100644 --- a/arch/mips/include/asm/hugetlb.h +++ b/arch/mips/include/asm/hugetlb.h @@ -70,6 +70,7 @@ static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) { + flush_tlb_mm(vma->vm_mm); } static inline int huge_pte_none(pte_t pte) diff --git a/arch/mips/include/asm/i8253.h b/arch/mips/include/asm/i8253.h index 48bb823..9ad0113 100644 --- a/arch/mips/include/asm/i8253.h +++ b/arch/mips/include/asm/i8253.h @@ -12,8 +12,13 @@ #define PIT_CH0 0x40 #define PIT_CH2 0x42 +#define PIT_LATCH LATCH + extern raw_spinlock_t i8253_lock; extern void setup_pit_timer(void); +#define inb_pit inb_p +#define outb_pit outb_p + #endif /* __ASM_I8253_H */ diff --git a/arch/mips/include/asm/jump_label.h b/arch/mips/include/asm/jump_label.h index 7622ccf..1881b31 100644 --- a/arch/mips/include/asm/jump_label.h +++ b/arch/mips/include/asm/jump_label.h @@ -20,16 +20,18 @@ #define WORD_INSN ".word" #endif -#define JUMP_LABEL(key, label) \ - do { \ - asm goto("1:\tnop\n\t" \ - "nop\n\t" \ - ".pushsection __jump_table, \"a\"\n\t" \ - WORD_INSN " 1b, %l[" #label "], %0\n\t" \ - ".popsection\n\t" \ - : : "i" (key) : : label); \ - } while (0) - +static __always_inline bool arch_static_branch(struct jump_label_key *key) +{ + asm goto("1:\tnop\n\t" + "nop\n\t" + ".pushsection __jump_table, \"aw\"\n\t" + WORD_INSN " 1b, %l[l_yes], %0\n\t" + ".popsection\n\t" + : : "i" (key) : : l_yes); + return false; +l_yes: + return true; +} #endif /* __KERNEL__ */ diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h index a697661..f260ebe 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000.h +++ b/arch/mips/include/asm/mach-au1x00/au1000.h @@ -161,6 +161,45 @@ static inline int alchemy_get_cputype(void) return ALCHEMY_CPU_UNKNOWN; } +/* return number of uarts on a given cputype */ +static inline int alchemy_get_uarts(int type) +{ + switch (type) { + case ALCHEMY_CPU_AU1000: + return 4; + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1200: + return 2; + case ALCHEMY_CPU_AU1100: + case ALCHEMY_CPU_AU1550: + return 3; + } + return 0; +} + +/* enable an UART block if it isn't already */ +static inline void alchemy_uart_enable(u32 uart_phys) +{ + void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys); + + /* reset, enable clock, deassert reset */ + if ((__raw_readl(addr + 0x100) & 3) != 3) { + __raw_writel(0, addr + 0x100); + wmb(); + __raw_writel(1, addr + 0x100); + wmb(); + } + __raw_writel(3, addr + 0x100); + wmb(); +} + +static inline void alchemy_uart_disable(u32 uart_phys) +{ + void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys); + __raw_writel(0, addr + 0x100); /* UART_MOD_CNTRL */ + wmb(); +} + static inline void alchemy_uart_putchar(u32 uart_phys, u8 c) { void __iomem *base = (void __iomem *)KSEG1ADDR(uart_phys); @@ -180,6 +219,20 @@ static inline void alchemy_uart_putchar(u32 uart_phys, u8 c) wmb(); } +/* return number of ethernet MACs on a given cputype */ +static inline int alchemy_get_macs(int type) +{ + switch (type) { + case ALCHEMY_CPU_AU1000: + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1550: + return 2; + case ALCHEMY_CPU_AU1100: + return 1; + } + return 0; +} + /* arch/mips/au1000/common/clocks.c */ extern void set_au1x00_speed(unsigned int new_freq); extern unsigned int get_au1x00_speed(void); @@ -630,38 +683,42 @@ enum soc_au1200_ints { /* * Physical base addresses for integrated peripherals + * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200 */ +#define AU1000_AC97_PHYS_ADDR 0x10000000 /* 012 */ +#define AU1000_USBD_PHYS_ADDR 0x10200000 /* 0123 */ +#define AU1000_IC0_PHYS_ADDR 0x10400000 /* 01234 */ +#define AU1000_MAC0_PHYS_ADDR 0x10500000 /* 023 */ +#define AU1000_MAC1_PHYS_ADDR 0x10510000 /* 023 */ +#define AU1000_MACEN_PHYS_ADDR 0x10520000 /* 023 */ +#define AU1100_SD0_PHYS_ADDR 0x10600000 /* 24 */ +#define AU1100_SD1_PHYS_ADDR 0x10680000 /* 24 */ +#define AU1000_I2S_PHYS_ADDR 0x11000000 /* 02 */ +#define AU1500_MAC0_PHYS_ADDR 0x11500000 /* 1 */ +#define AU1500_MAC1_PHYS_ADDR 0x11510000 /* 1 */ +#define AU1500_MACEN_PHYS_ADDR 0x11520000 /* 1 */ +#define AU1000_UART0_PHYS_ADDR 0x11100000 /* 01234 */ +#define AU1000_UART1_PHYS_ADDR 0x11200000 /* 0234 */ +#define AU1000_UART2_PHYS_ADDR 0x11300000 /* 0 */ +#define AU1000_UART3_PHYS_ADDR 0x11400000 /* 0123 */ +#define AU1500_GPIO2_PHYS_ADDR 0x11700000 /* 1234 */ +#define AU1000_IC1_PHYS_ADDR 0x11800000 /* 01234 */ +#define AU1000_SYS_PHYS_ADDR 0x11900000 /* 01234 */ +#define AU1000_DMA_PHYS_ADDR 0x14002000 /* 012 */ +#define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 34 */ +#define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 34 */ +#define AU1000_MACDMA0_PHYS_ADDR 0x14004000 /* 0123 */ +#define AU1000_MACDMA1_PHYS_ADDR 0x14004200 /* 0123 */ + + #ifdef CONFIG_SOC_AU1000 #define MEM_PHYS_ADDR 0x14000000 #define STATIC_MEM_PHYS_ADDR 0x14001000 -#define DMA0_PHYS_ADDR 0x14002000 -#define DMA1_PHYS_ADDR 0x14002100 -#define DMA2_PHYS_ADDR 0x14002200 -#define DMA3_PHYS_ADDR 0x14002300 -#define DMA4_PHYS_ADDR 0x14002400 -#define DMA5_PHYS_ADDR 0x14002500 -#define DMA6_PHYS_ADDR 0x14002600 -#define DMA7_PHYS_ADDR 0x14002700 -#define IC0_PHYS_ADDR 0x10400000 -#define IC1_PHYS_ADDR 0x11800000 -#define AC97_PHYS_ADDR 0x10000000 #define USBH_PHYS_ADDR 0x10100000 -#define USBD_PHYS_ADDR 0x10200000 #define IRDA_PHYS_ADDR 0x10300000 -#define MAC0_PHYS_ADDR 0x10500000 -#define MAC1_PHYS_ADDR 0x10510000 -#define MACEN_PHYS_ADDR 0x10520000 -#define MACDMA0_PHYS_ADDR 0x14004000 -#define MACDMA1_PHYS_ADDR 0x14004200 -#define I2S_PHYS_ADDR 0x11000000 -#define UART0_PHYS_ADDR 0x11100000 -#define UART1_PHYS_ADDR 0x11200000 -#define UART2_PHYS_ADDR 0x11300000 -#define UART3_PHYS_ADDR 0x11400000 #define SSI0_PHYS_ADDR 0x11600000 #define SSI1_PHYS_ADDR 0x11680000 -#define SYS_PHYS_ADDR 0x11900000 #define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL #define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL #define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL @@ -672,30 +729,8 @@ enum soc_au1200_ints { #ifdef CONFIG_SOC_AU1500 #define MEM_PHYS_ADDR 0x14000000 #define STATIC_MEM_PHYS_ADDR 0x14001000 -#define DMA0_PHYS_ADDR 0x14002000 -#define DMA1_PHYS_ADDR 0x14002100 -#define DMA2_PHYS_ADDR 0x14002200 -#define DMA3_PHYS_ADDR 0x14002300 -#define DMA4_PHYS_ADDR 0x14002400 -#define DMA5_PHYS_ADDR 0x14002500 -#define DMA6_PHYS_ADDR 0x14002600 -#define DMA7_PHYS_ADDR 0x14002700 -#define IC0_PHYS_ADDR 0x10400000 -#define IC1_PHYS_ADDR 0x11800000 -#define AC97_PHYS_ADDR 0x10000000 #define USBH_PHYS_ADDR 0x10100000 -#define USBD_PHYS_ADDR 0x10200000 #define PCI_PHYS_ADDR 0x14005000 -#define MAC0_PHYS_ADDR 0x11500000 -#define MAC1_PHYS_ADDR 0x11510000 -#define MACEN_PHYS_ADDR 0x11520000 -#define MACDMA0_PHYS_ADDR 0x14004000 -#define MACDMA1_PHYS_ADDR 0x14004200 -#define I2S_PHYS_ADDR 0x11000000 -#define UART0_PHYS_ADDR 0x11100000 -#define UART3_PHYS_ADDR 0x11400000 -#define GPIO2_PHYS_ADDR 0x11700000 -#define SYS_PHYS_ADDR 0x11900000 #define PCI_MEM_PHYS_ADDR 0x400000000ULL #define PCI_IO_PHYS_ADDR 0x500000000ULL #define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL @@ -710,34 +745,10 @@ enum soc_au1200_ints { #ifdef CONFIG_SOC_AU1100 #define MEM_PHYS_ADDR 0x14000000 #define STATIC_MEM_PHYS_ADDR 0x14001000 -#define DMA0_PHYS_ADDR 0x14002000 -#define DMA1_PHYS_ADDR 0x14002100 -#define DMA2_PHYS_ADDR 0x14002200 -#define DMA3_PHYS_ADDR 0x14002300 -#define DMA4_PHYS_ADDR 0x14002400 -#define DMA5_PHYS_ADDR 0x14002500 -#define DMA6_PHYS_ADDR 0x14002600 -#define DMA7_PHYS_ADDR 0x14002700 -#define IC0_PHYS_ADDR 0x10400000 -#define SD0_PHYS_ADDR 0x10600000 -#define SD1_PHYS_ADDR 0x10680000 -#define IC1_PHYS_ADDR 0x11800000 -#define AC97_PHYS_ADDR 0x10000000 #define USBH_PHYS_ADDR 0x10100000 -#define USBD_PHYS_ADDR 0x10200000 #define IRDA_PHYS_ADDR 0x10300000 -#define MAC0_PHYS_ADDR 0x10500000 -#define MACEN_PHYS_ADDR 0x10520000 -#define MACDMA0_PHYS_ADDR 0x14004000 -#define MACDMA1_PHYS_ADDR 0x14004200 -#define I2S_PHYS_ADDR 0x11000000 -#define UART0_PHYS_ADDR 0x11100000 -#define UART1_PHYS_ADDR 0x11200000 -#define UART3_PHYS_ADDR 0x11400000 #define SSI0_PHYS_ADDR 0x11600000 #define SSI1_PHYS_ADDR 0x11680000 -#define GPIO2_PHYS_ADDR 0x11700000 -#define SYS_PHYS_ADDR 0x11900000 #define LCD_PHYS_ADDR 0x15000000 #define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL #define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL @@ -749,22 +760,8 @@ enum soc_au1200_ints { #ifdef CONFIG_SOC_AU1550 #define MEM_PHYS_ADDR 0x14000000 #define STATIC_MEM_PHYS_ADDR 0x14001000 -#define IC0_PHYS_ADDR 0x10400000 -#define IC1_PHYS_ADDR 0x11800000 #define USBH_PHYS_ADDR 0x14020000 -#define USBD_PHYS_ADDR 0x10200000 #define PCI_PHYS_ADDR 0x14005000 -#define MAC0_PHYS_ADDR 0x10500000 -#define MAC1_PHYS_ADDR 0x10510000 -#define MACEN_PHYS_ADDR 0x10520000 -#define MACDMA0_PHYS_ADDR 0x14004000 -#define MACDMA1_PHYS_ADDR 0x14004200 -#define UART0_PHYS_ADDR 0x11100000 -#define UART1_PHYS_ADDR 0x11200000 -#define UART3_PHYS_ADDR 0x11400000 -#define GPIO2_PHYS_ADDR 0x11700000 -#define SYS_PHYS_ADDR 0x11900000 -#define DDMA_PHYS_ADDR 0x14002000 #define PE_PHYS_ADDR 0x14008000 #define PSC0_PHYS_ADDR 0x11A00000 #define PSC1_PHYS_ADDR 0x11B00000 @@ -786,19 +783,10 @@ enum soc_au1200_ints { #define STATIC_MEM_PHYS_ADDR 0x14001000 #define AES_PHYS_ADDR 0x10300000 #define CIM_PHYS_ADDR 0x14004000 -#define IC0_PHYS_ADDR 0x10400000 -#define IC1_PHYS_ADDR 0x11800000 #define USBM_PHYS_ADDR 0x14020000 #define USBH_PHYS_ADDR 0x14020100 -#define UART0_PHYS_ADDR 0x11100000 -#define UART1_PHYS_ADDR 0x11200000 -#define GPIO2_PHYS_ADDR 0x11700000 -#define SYS_PHYS_ADDR 0x11900000 -#define DDMA_PHYS_ADDR 0x14002000 #define PSC0_PHYS_ADDR 0x11A00000 #define PSC1_PHYS_ADDR 0x11B00000 -#define SD0_PHYS_ADDR 0x10600000 -#define SD1_PHYS_ADDR 0x10680000 #define LCD_PHYS_ADDR 0x15000000 #define SWCNT_PHYS_ADDR 0x1110010C #define MAEFE_PHYS_ADDR 0x14012000 @@ -835,183 +823,43 @@ enum soc_au1200_ints { #endif -/* Interrupt Controller register offsets */ -#define IC_CFG0RD 0x40 -#define IC_CFG0SET 0x40 -#define IC_CFG0CLR 0x44 -#define IC_CFG1RD 0x48 -#define IC_CFG1SET 0x48 -#define IC_CFG1CLR 0x4C -#define IC_CFG2RD 0x50 -#define IC_CFG2SET 0x50 -#define IC_CFG2CLR 0x54 -#define IC_REQ0INT 0x54 -#define IC_SRCRD 0x58 -#define IC_SRCSET 0x58 -#define IC_SRCCLR 0x5C -#define IC_REQ1INT 0x5C -#define IC_ASSIGNRD 0x60 -#define IC_ASSIGNSET 0x60 -#define IC_ASSIGNCLR 0x64 -#define IC_WAKERD 0x68 -#define IC_WAKESET 0x68 -#define IC_WAKECLR 0x6C -#define IC_MASKRD 0x70 -#define IC_MASKSET 0x70 -#define IC_MASKCLR 0x74 -#define IC_RISINGRD 0x78 -#define IC_RISINGCLR 0x78 -#define IC_FALLINGRD 0x7C -#define IC_FALLINGCLR 0x7C -#define IC_TESTBIT 0x80 - - -/* Interrupt Controller 0 */ -#define IC0_CFG0RD 0xB0400040 -#define IC0_CFG0SET 0xB0400040 -#define IC0_CFG0CLR 0xB0400044 - -#define IC0_CFG1RD 0xB0400048 -#define IC0_CFG1SET 0xB0400048 -#define IC0_CFG1CLR 0xB040004C - -#define IC0_CFG2RD 0xB0400050 -#define IC0_CFG2SET 0xB0400050 -#define IC0_CFG2CLR 0xB0400054 - -#define IC0_REQ0INT 0xB0400054 -#define IC0_SRCRD 0xB0400058 -#define IC0_SRCSET 0xB0400058 -#define IC0_SRCCLR 0xB040005C -#define IC0_REQ1INT 0xB040005C - -#define IC0_ASSIGNRD 0xB0400060 -#define IC0_ASSIGNSET 0xB0400060 -#define IC0_ASSIGNCLR 0xB0400064 - -#define IC0_WAKERD 0xB0400068 -#define IC0_WAKESET 0xB0400068 -#define IC0_WAKECLR 0xB040006C - -#define IC0_MASKRD 0xB0400070 -#define IC0_MASKSET 0xB0400070 -#define IC0_MASKCLR 0xB0400074 - -#define IC0_RISINGRD 0xB0400078 -#define IC0_RISINGCLR 0xB0400078 -#define IC0_FALLINGRD 0xB040007C -#define IC0_FALLINGCLR 0xB040007C - -#define IC0_TESTBIT 0xB0400080 - -/* Interrupt Controller 1 */ -#define IC1_CFG0RD 0xB1800040 -#define IC1_CFG0SET 0xB1800040 -#define IC1_CFG0CLR 0xB1800044 - -#define IC1_CFG1RD 0xB1800048 -#define IC1_CFG1SET 0xB1800048 -#define IC1_CFG1CLR 0xB180004C - -#define IC1_CFG2RD 0xB1800050 -#define IC1_CFG2SET 0xB1800050 -#define IC1_CFG2CLR 0xB1800054 - -#define IC1_REQ0INT 0xB1800054 -#define IC1_SRCRD 0xB1800058 -#define IC1_SRCSET 0xB1800058 -#define IC1_SRCCLR 0xB180005C -#define IC1_REQ1INT 0xB180005C - -#define IC1_ASSIGNRD 0xB1800060 -#define IC1_ASSIGNSET 0xB1800060 -#define IC1_ASSIGNCLR 0xB1800064 - -#define IC1_WAKERD 0xB1800068 -#define IC1_WAKESET 0xB1800068 -#define IC1_WAKECLR 0xB180006C - -#define IC1_MASKRD 0xB1800070 -#define IC1_MASKSET 0xB1800070 -#define IC1_MASKCLR 0xB1800074 - -#define IC1_RISINGRD 0xB1800078 -#define IC1_RISINGCLR 0xB1800078 -#define IC1_FALLINGRD 0xB180007C -#define IC1_FALLINGCLR 0xB180007C - -#define IC1_TESTBIT 0xB1800080 /* Au1000 */ #ifdef CONFIG_SOC_AU1000 -#define UART0_ADDR 0xB1100000 -#define UART3_ADDR 0xB1400000 - #define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ #define USB_HOST_CONFIG 0xB017FFFC #define FOR_PLATFORM_C_USB_HOST_INT AU1000_USB_HOST_INT - -#define AU1000_ETH0_BASE 0xB0500000 -#define AU1000_ETH1_BASE 0xB0510000 -#define AU1000_MAC0_ENABLE 0xB0520000 -#define AU1000_MAC1_ENABLE 0xB0520004 -#define NUM_ETH_INTERFACES 2 #endif /* CONFIG_SOC_AU1000 */ /* Au1500 */ #ifdef CONFIG_SOC_AU1500 -#define UART0_ADDR 0xB1100000 -#define UART3_ADDR 0xB1400000 - #define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ #define USB_HOST_CONFIG 0xB017fffc #define FOR_PLATFORM_C_USB_HOST_INT AU1500_USB_HOST_INT - -#define AU1500_ETH0_BASE 0xB1500000 -#define AU1500_ETH1_BASE 0xB1510000 -#define AU1500_MAC0_ENABLE 0xB1520000 -#define AU1500_MAC1_ENABLE 0xB1520004 -#define NUM_ETH_INTERFACES 2 #endif /* CONFIG_SOC_AU1500 */ /* Au1100 */ #ifdef CONFIG_SOC_AU1100 -#define UART0_ADDR 0xB1100000 -#define UART3_ADDR 0xB1400000 - #define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ #define USB_HOST_CONFIG 0xB017FFFC #define FOR_PLATFORM_C_USB_HOST_INT AU1100_USB_HOST_INT - -#define AU1100_ETH0_BASE 0xB0500000 -#define AU1100_MAC0_ENABLE 0xB0520000 -#define NUM_ETH_INTERFACES 1 #endif /* CONFIG_SOC_AU1100 */ #ifdef CONFIG_SOC_AU1550 -#define UART0_ADDR 0xB1100000 #define USB_OHCI_BASE 0x14020000 /* phys addr for ioremap */ #define USB_OHCI_LEN 0x00060000 #define USB_HOST_CONFIG 0xB4027ffc #define FOR_PLATFORM_C_USB_HOST_INT AU1550_USB_HOST_INT - -#define AU1550_ETH0_BASE 0xB0500000 -#define AU1550_ETH1_BASE 0xB0510000 -#define AU1550_MAC0_ENABLE 0xB0520000 -#define AU1550_MAC1_ENABLE 0xB0520004 -#define NUM_ETH_INTERFACES 2 #endif /* CONFIG_SOC_AU1550 */ #ifdef CONFIG_SOC_AU1200 -#define UART0_ADDR 0xB1100000 - #define USB_UOC_BASE 0x14020020 #define USB_UOC_LEN 0x20 #define USB_OHCI_BASE 0x14020100 @@ -1504,22 +1352,6 @@ enum soc_au1200_ints { #define SYS_PINFUNC_S1B (1 << 2) #endif -#define SYS_TRIOUTRD 0xB1900100 -#define SYS_TRIOUTCLR 0xB1900100 -#define SYS_OUTPUTRD 0xB1900108 -#define SYS_OUTPUTSET 0xB1900108 -#define SYS_OUTPUTCLR 0xB190010C -#define SYS_PINSTATERD 0xB1900110 -#define SYS_PININPUTEN 0xB1900110 - -/* GPIO2, Au1500, Au1550 only */ -#define GPIO2_BASE 0xB1700000 -#define GPIO2_DIR (GPIO2_BASE + 0) -#define GPIO2_OUTPUT (GPIO2_BASE + 8) -#define GPIO2_PINSTATE (GPIO2_BASE + 0xC) -#define GPIO2_INTENABLE (GPIO2_BASE + 0x10) -#define GPIO2_ENABLE (GPIO2_BASE + 0x14) - /* Power Management */ #define SYS_SCRATCH0 0xB1900018 #define SYS_SCRATCH1 0xB190001C @@ -1635,12 +1467,6 @@ enum soc_au1200_ints { # define AC97C_RS (1 << 1) # define AC97C_CE (1 << 0) -/* Secure Digital (SD) Controller */ -#define SD0_XMIT_FIFO 0xB0600000 -#define SD0_RECV_FIFO 0xB0600004 -#define SD1_XMIT_FIFO 0xB0680000 -#define SD1_RECV_FIFO 0xB0680004 - #if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) /* Au1500 PCI Controller */ #define Au1500_CFG_BASE 0xB4005000 /* virtual, KSEG1 addr */ diff --git a/arch/mips/include/asm/mach-au1x00/au1000_dma.h b/arch/mips/include/asm/mach-au1x00/au1000_dma.h index c333b4e..59f5b55 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000_dma.h +++ b/arch/mips/include/asm/mach-au1x00/au1000_dma.h @@ -37,10 +37,6 @@ #define NUM_AU1000_DMA_CHANNELS 8 -/* DMA Channel Base Addresses */ -#define DMA_CHANNEL_BASE 0xB4002000 -#define DMA_CHANNEL_LEN 0x00000100 - /* DMA Channel Register Offsets */ #define DMA_MODE_SET 0x00000000 #define DMA_MODE_READ DMA_MODE_SET diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h index c8a553a3..2fdacfe 100644 --- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h @@ -37,14 +37,6 @@ #ifndef _LANGUAGE_ASSEMBLY -/* - * The DMA base addresses. - * The channels are every 256 bytes (0x0100) from the channel 0 base. - * Interrupt status/enable is bits 15:0 for channels 15 to zero. - */ -#define DDMA_GLOBAL_BASE 0xb4003000 -#define DDMA_CHANNEL_BASE 0xb4002000 - typedef volatile struct dbdma_global { u32 ddma_config; u32 ddma_intstat; diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h index 62d2f13..1f41a52 100644 --- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h +++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h @@ -24,6 +24,23 @@ #define MAKE_IRQ(intc, off) (AU1000_INTC##intc##_INT_BASE + (off)) +/* GPIO1 registers within SYS_ area */ +#define SYS_TRIOUTRD 0x100 +#define SYS_TRIOUTCLR 0x100 +#define SYS_OUTPUTRD 0x108 +#define SYS_OUTPUTSET 0x108 +#define SYS_OUTPUTCLR 0x10C +#define SYS_PINSTATERD 0x110 +#define SYS_PININPUTEN 0x110 + +/* register offsets within GPIO2 block */ +#define GPIO2_DIR 0x00 +#define GPIO2_OUTPUT 0x08 +#define GPIO2_PINSTATE 0x0C +#define GPIO2_INTENABLE 0x10 +#define GPIO2_ENABLE 0x14 + +struct gpio; static inline int au1000_gpio1_to_irq(int gpio) { @@ -200,23 +217,26 @@ static inline int au1200_irq_to_gpio(int irq) */ static inline void alchemy_gpio1_set_value(int gpio, int v) { + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE); unsigned long r = v ? SYS_OUTPUTSET : SYS_OUTPUTCLR; - au_writel(mask, r); - au_sync(); + __raw_writel(mask, base + r); + wmb(); } static inline int alchemy_gpio1_get_value(int gpio) { + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE); - return au_readl(SYS_PINSTATERD) & mask; + return __raw_readl(base + SYS_PINSTATERD) & mask; } static inline int alchemy_gpio1_direction_input(int gpio) { + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE); - au_writel(mask, SYS_TRIOUTCLR); - au_sync(); + __raw_writel(mask, base + SYS_TRIOUTCLR); + wmb(); return 0; } @@ -257,27 +277,31 @@ static inline int alchemy_gpio1_to_irq(int gpio) */ static inline void __alchemy_gpio2_mod_dir(int gpio, int to_out) { + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); unsigned long mask = 1 << (gpio - ALCHEMY_GPIO2_BASE); - unsigned long d = au_readl(GPIO2_DIR); + unsigned long d = __raw_readl(base + GPIO2_DIR); + if (to_out) d |= mask; else d &= ~mask; - au_writel(d, GPIO2_DIR); - au_sync(); + __raw_writel(d, base + GPIO2_DIR); + wmb(); } static inline void alchemy_gpio2_set_value(int gpio, int v) { + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); unsigned long mask; mask = ((v) ? 0x00010001 : 0x00010000) << (gpio - ALCHEMY_GPIO2_BASE); - au_writel(mask, GPIO2_OUTPUT); - au_sync(); + __raw_writel(mask, base + GPIO2_OUTPUT); + wmb(); } static inline int alchemy_gpio2_get_value(int gpio) { - return au_readl(GPIO2_PINSTATE) & (1 << (gpio - ALCHEMY_GPIO2_BASE)); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); + return __raw_readl(base + GPIO2_PINSTATE) & (1 << (gpio - ALCHEMY_GPIO2_BASE)); } static inline int alchemy_gpio2_direction_input(int gpio) @@ -329,21 +353,23 @@ static inline int alchemy_gpio2_to_irq(int gpio) */ static inline void alchemy_gpio1_input_enable(void) { - au_writel(0, SYS_PININPUTEN); /* the write op is key */ - au_sync(); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); + __raw_writel(0, base + SYS_PININPUTEN); /* the write op is key */ + wmb(); } /* GPIO2 shared interrupts and control */ static inline void __alchemy_gpio2_mod_int(int gpio2, int en) { - unsigned long r = au_readl(GPIO2_INTENABLE); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); + unsigned long r = __raw_readl(base + GPIO2_INTENABLE); if (en) r |= 1 << gpio2; else r &= ~(1 << gpio2); - au_writel(r, GPIO2_INTENABLE); - au_sync(); + __raw_writel(r, base + GPIO2_INTENABLE); + wmb(); } /** @@ -418,10 +444,11 @@ static inline void alchemy_gpio2_disable_int(int gpio2) */ static inline void alchemy_gpio2_enable(void) { - au_writel(3, GPIO2_ENABLE); /* reset, clock enabled */ - au_sync(); - au_writel(1, GPIO2_ENABLE); /* clock enabled */ - au_sync(); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); + __raw_writel(3, base + GPIO2_ENABLE); /* reset, clock enabled */ + wmb(); + __raw_writel(1, base + GPIO2_ENABLE); /* clock enabled */ + wmb(); } /** @@ -431,8 +458,9 @@ static inline void alchemy_gpio2_enable(void) */ static inline void alchemy_gpio2_disable(void) { - au_writel(2, GPIO2_ENABLE); /* reset, clock disabled */ - au_sync(); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); + __raw_writel(2, base + GPIO2_ENABLE); /* reset, clock disabled */ + wmb(); } /**********************************************************************/ @@ -556,6 +584,16 @@ static inline void gpio_set_value(int gpio, int v) alchemy_gpio_set_value(gpio, v); } +static inline int gpio_get_value_cansleep(unsigned gpio) +{ + return gpio_get_value(gpio); +} + +static inline void gpio_set_value_cansleep(unsigned gpio, int value) +{ + gpio_set_value(gpio, value); +} + static inline int gpio_is_valid(int gpio) { return alchemy_gpio_is_valid(gpio); @@ -581,10 +619,50 @@ static inline int gpio_request(unsigned gpio, const char *label) return 0; } +static inline int gpio_request_one(unsigned gpio, + unsigned long flags, const char *label) +{ + return 0; +} + +static inline int gpio_request_array(struct gpio *array, size_t num) +{ + return 0; +} + static inline void gpio_free(unsigned gpio) { } +static inline void gpio_free_array(struct gpio *array, size_t num) +{ +} + +static inline int gpio_set_debounce(unsigned gpio, unsigned debounce) +{ + return -ENOSYS; +} + +static inline int gpio_export(unsigned gpio, bool direction_may_change) +{ + return -ENOSYS; +} + +static inline int gpio_export_link(struct device *dev, const char *name, + unsigned gpio) +{ + return -ENOSYS; +} + +static inline int gpio_sysfs_set_active_low(unsigned gpio, int value) +{ + return -ENOSYS; +} + +static inline void gpio_unexport(unsigned gpio) +{ +} + #endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */ diff --git a/arch/mips/include/asm/mach-bcm47xx/nvram.h b/arch/mips/include/asm/mach-bcm47xx/nvram.h index 9759588..184d5ec 100644 --- a/arch/mips/include/asm/mach-bcm47xx/nvram.h +++ b/arch/mips/include/asm/mach-bcm47xx/nvram.h @@ -39,8 +39,16 @@ extern int nvram_getenv(char *name, char *val, size_t val_len); static inline void nvram_parse_macaddr(char *buf, u8 *macaddr) { - sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0], &macaddr[1], - &macaddr[2], &macaddr[3], &macaddr[4], &macaddr[5]); + if (strchr(buf, ':')) + sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0], + &macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4], + &macaddr[5]); + else if (strchr(buf, '-')) + sscanf(buf, "%hhx-%hhx-%hhx-%hhx-%hhx-%hhx", &macaddr[0], + &macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4], + &macaddr[5]); + else + printk(KERN_WARNING "Can not parse mac address: %s\n", buf); } #endif diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h b/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h index 32978d3..ed72e6a 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm963xx_tag.h @@ -88,7 +88,7 @@ struct bcm_tag { char kernel_crc[CRC_LEN]; /* 228-235: Unused at present */ char reserved1[8]; - /* 236-239: CRC32 of header excluding tagVersion */ + /* 236-239: CRC32 of header excluding last 20 bytes */ char header_crc[CRC_LEN]; /* 240-255: Unused at present */ char reserved2[16]; diff --git a/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h b/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h index 0b2b5eb..dedef7d 100644 --- a/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h +++ b/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h @@ -63,6 +63,11 @@ # CN30XX Disable instruction prefetching or v0, v0, 0x2000 skip: + # First clear off CvmCtl[IPPCI] bit and move the performance + # counters interrupt to IRQ 6 + li v1, ~(7 << 7) + and v0, v0, v1 + ori v0, v0, (6 << 7) # Write the cavium control register dmtc0 v0, CP0_CVMCTL_REG sync diff --git a/arch/mips/include/asm/mach-lantiq/lantiq.h b/arch/mips/include/asm/mach-lantiq/lantiq.h new file mode 100644 index 0000000..ce2f029 --- /dev/null +++ b/arch/mips/include/asm/mach-lantiq/lantiq.h @@ -0,0 +1,63 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ +#ifndef _LANTIQ_H__ +#define _LANTIQ_H__ + +#include <linux/irq.h> + +/* generic reg access functions */ +#define ltq_r32(reg) __raw_readl(reg) +#define ltq_w32(val, reg) __raw_writel(val, reg) +#define ltq_w32_mask(clear, set, reg) \ + ltq_w32((ltq_r32(reg) & ~(clear)) | (set), reg) +#define ltq_r8(reg) __raw_readb(reg) +#define ltq_w8(val, reg) __raw_writeb(val, reg) + +/* register access macros for EBU and CGU */ +#define ltq_ebu_w32(x, y) ltq_w32((x), ltq_ebu_membase + (y)) +#define ltq_ebu_r32(x) ltq_r32(ltq_ebu_membase + (x)) +#define ltq_cgu_w32(x, y) ltq_w32((x), ltq_cgu_membase + (y)) +#define ltq_cgu_r32(x) ltq_r32(ltq_cgu_membase + (x)) + +extern __iomem void *ltq_ebu_membase; +extern __iomem void *ltq_cgu_membase; + +extern unsigned int ltq_get_cpu_ver(void); +extern unsigned int ltq_get_soc_type(void); + +/* clock speeds */ +#define CLOCK_60M 60000000 +#define CLOCK_83M 83333333 +#define CLOCK_111M 111111111 +#define CLOCK_133M 133333333 +#define CLOCK_167M 166666667 +#define CLOCK_200M 200000000 +#define CLOCK_266M 266666666 +#define CLOCK_333M 333333333 +#define CLOCK_400M 400000000 + +/* spinlock all ebu i/o */ +extern spinlock_t ebu_lock; + +/* some irq helpers */ +extern void ltq_disable_irq(struct irq_data *data); +extern void ltq_mask_and_ack_irq(struct irq_data *data); +extern void ltq_enable_irq(struct irq_data *data); + +/* find out what caused the last cpu reset */ +extern int ltq_reset_cause(void); +#define LTQ_RST_CAUSE_WDTRST 0x20 + +#define IOPORT_RESOURCE_START 0x10000000 +#define IOPORT_RESOURCE_END 0xffffffff +#define IOMEM_RESOURCE_START 0x10000000 +#define IOMEM_RESOURCE_END 0xffffffff +#define LTQ_FLASH_START 0x10000000 +#define LTQ_FLASH_MAX 0x04000000 + +#endif diff --git a/arch/mips/include/asm/mach-lantiq/lantiq_platform.h b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h new file mode 100644 index 0000000..a305f1d --- /dev/null +++ b/arch/mips/include/asm/mach-lantiq/lantiq_platform.h @@ -0,0 +1,53 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LANTIQ_PLATFORM_H__ +#define _LANTIQ_PLATFORM_H__ + +#include <linux/mtd/partitions.h> +#include <linux/socket.h> + +/* struct used to pass info to the pci core */ +enum { + PCI_CLOCK_INT = 0, + PCI_CLOCK_EXT +}; + +#define PCI_EXIN0 0x0001 +#define PCI_EXIN1 0x0002 +#define PCI_EXIN2 0x0004 +#define PCI_EXIN3 0x0008 +#define PCI_EXIN4 0x0010 +#define PCI_EXIN5 0x0020 +#define PCI_EXIN_MAX 6 + +#define PCI_GNT1 0x0040 +#define PCI_GNT2 0x0080 +#define PCI_GNT3 0x0100 +#define PCI_GNT4 0x0200 + +#define PCI_REQ1 0x0400 +#define PCI_REQ2 0x0800 +#define PCI_REQ3 0x1000 +#define PCI_REQ4 0x2000 +#define PCI_REQ_SHIFT 10 +#define PCI_REQ_MASK 0xf + +struct ltq_pci_data { + int clock; + int gpio; + int irq[16]; +}; + +/* struct used to pass info to network drivers */ +struct ltq_eth_data { + struct sockaddr mac; + int mii_mode; +}; + +#endif diff --git a/arch/mips/include/asm/mach-lantiq/war.h b/arch/mips/include/asm/mach-lantiq/war.h new file mode 100644 index 0000000..01b08ef --- /dev/null +++ b/arch/mips/include/asm/mach-lantiq/war.h @@ -0,0 +1,24 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#ifndef __ASM_MIPS_MACH_LANTIQ_WAR_H +#define __ASM_MIPS_MACH_LANTIQ_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif diff --git a/arch/mips/include/asm/mach-lantiq/xway/irq.h b/arch/mips/include/asm/mach-lantiq/xway/irq.h new file mode 100644 index 0000000..a1471d2 --- /dev/null +++ b/arch/mips/include/asm/mach-lantiq/xway/irq.h @@ -0,0 +1,18 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef __LANTIQ_IRQ_H +#define __LANTIQ_IRQ_H + +#include <lantiq_irq.h> + +#define NR_IRQS 256 + +#include_next <irq.h> + +#endif diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h new file mode 100644 index 0000000..b4465a8 --- /dev/null +++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h @@ -0,0 +1,66 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LANTIQ_XWAY_IRQ_H__ +#define _LANTIQ_XWAY_IRQ_H__ + +#define INT_NUM_IRQ0 8 +#define INT_NUM_IM0_IRL0 (INT_NUM_IRQ0 + 0) +#define INT_NUM_IM1_IRL0 (INT_NUM_IRQ0 + 32) +#define INT_NUM_IM2_IRL0 (INT_NUM_IRQ0 + 64) +#define INT_NUM_IM3_IRL0 (INT_NUM_IRQ0 + 96) +#define INT_NUM_IM4_IRL0 (INT_NUM_IRQ0 + 128) +#define INT_NUM_IM_OFFSET (INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0) + +#define LTQ_ASC_TIR(x) (INT_NUM_IM3_IRL0 + (x * 8)) +#define LTQ_ASC_RIR(x) (INT_NUM_IM3_IRL0 + (x * 8) + 1) +#define LTQ_ASC_EIR(x) (INT_NUM_IM3_IRL0 + (x * 8) + 2) + +#define LTQ_ASC_ASE_TIR INT_NUM_IM2_IRL0 +#define LTQ_ASC_ASE_RIR (INT_NUM_IM2_IRL0 + 2) +#define LTQ_ASC_ASE_EIR (INT_NUM_IM2_IRL0 + 3) + +#define LTQ_SSC_TIR (INT_NUM_IM0_IRL0 + 15) +#define LTQ_SSC_RIR (INT_NUM_IM0_IRL0 + 14) +#define LTQ_SSC_EIR (INT_NUM_IM0_IRL0 + 16) + +#define LTQ_MEI_DYING_GASP_INT (INT_NUM_IM1_IRL0 + 21) +#define LTQ_MEI_INT (INT_NUM_IM1_IRL0 + 23) + +#define LTQ_TIMER6_INT (INT_NUM_IM1_IRL0 + 23) +#define LTQ_USB_INT (INT_NUM_IM1_IRL0 + 22) +#define LTQ_USB_OC_INT (INT_NUM_IM4_IRL0 + 23) + +#define MIPS_CPU_TIMER_IRQ 7 + +#define LTQ_DMA_CH0_INT (INT_NUM_IM2_IRL0) +#define LTQ_DMA_CH1_INT (INT_NUM_IM2_IRL0 + 1) +#define LTQ_DMA_CH2_INT (INT_NUM_IM2_IRL0 + 2) +#define LTQ_DMA_CH3_INT (INT_NUM_IM2_IRL0 + 3) +#define LTQ_DMA_CH4_INT (INT_NUM_IM2_IRL0 + 4) +#define LTQ_DMA_CH5_INT (INT_NUM_IM2_IRL0 + 5) +#define LTQ_DMA_CH6_INT (INT_NUM_IM2_IRL0 + 6) +#define LTQ_DMA_CH7_INT (INT_NUM_IM2_IRL0 + 7) +#define LTQ_DMA_CH8_INT (INT_NUM_IM2_IRL0 + 8) +#define LTQ_DMA_CH9_INT (INT_NUM_IM2_IRL0 + 9) +#define LTQ_DMA_CH10_INT (INT_NUM_IM2_IRL0 + 10) +#define LTQ_DMA_CH11_INT (INT_NUM_IM2_IRL0 + 11) +#define LTQ_DMA_CH12_INT (INT_NUM_IM2_IRL0 + 25) +#define LTQ_DMA_CH13_INT (INT_NUM_IM2_IRL0 + 26) +#define LTQ_DMA_CH14_INT (INT_NUM_IM2_IRL0 + 27) +#define LTQ_DMA_CH15_INT (INT_NUM_IM2_IRL0 + 28) +#define LTQ_DMA_CH16_INT (INT_NUM_IM2_IRL0 + 29) +#define LTQ_DMA_CH17_INT (INT_NUM_IM2_IRL0 + 30) +#define LTQ_DMA_CH18_INT (INT_NUM_IM2_IRL0 + 16) +#define LTQ_DMA_CH19_INT (INT_NUM_IM2_IRL0 + 21) + +#define LTQ_PPE_MBOX_INT (INT_NUM_IM2_IRL0 + 24) + +#define INT_NUM_IM4_IRL14 (INT_NUM_IM4_IRL0 + 14) + +#endif diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h new file mode 100644 index 0000000..8a3c6be --- /dev/null +++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h @@ -0,0 +1,141 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LTQ_XWAY_H__ +#define _LTQ_XWAY_H__ + +#ifdef CONFIG_SOC_TYPE_XWAY + +#include <lantiq.h> + +/* Chip IDs */ +#define SOC_ID_DANUBE1 0x129 +#define SOC_ID_DANUBE2 0x12B +#define SOC_ID_TWINPASS 0x12D +#define SOC_ID_AMAZON_SE 0x152 +#define SOC_ID_ARX188 0x16C +#define SOC_ID_ARX168 0x16D +#define SOC_ID_ARX182 0x16F + +/* SoC Types */ +#define SOC_TYPE_DANUBE 0x01 +#define SOC_TYPE_TWINPASS 0x02 +#define SOC_TYPE_AR9 0x03 +#define SOC_TYPE_VR9 0x04 +#define SOC_TYPE_AMAZON_SE 0x05 + +/* ASC0/1 - serial port */ +#define LTQ_ASC0_BASE_ADDR 0x1E100400 +#define LTQ_ASC1_BASE_ADDR 0x1E100C00 +#define LTQ_ASC_SIZE 0x400 + +/* RCU - reset control unit */ +#define LTQ_RCU_BASE_ADDR 0x1F203000 +#define LTQ_RCU_SIZE 0x1000 + +/* GPTU - general purpose timer unit */ +#define LTQ_GPTU_BASE_ADDR 0x18000300 +#define LTQ_GPTU_SIZE 0x100 + +/* EBU - external bus unit */ +#define LTQ_EBU_GPIO_START 0x14000000 +#define LTQ_EBU_GPIO_SIZE 0x1000 + +#define LTQ_EBU_BASE_ADDR 0x1E105300 +#define LTQ_EBU_SIZE 0x100 + +#define LTQ_EBU_BUSCON0 0x0060 +#define LTQ_EBU_PCC_CON 0x0090 +#define LTQ_EBU_PCC_IEN 0x00A4 +#define LTQ_EBU_PCC_ISTAT 0x00A0 +#define LTQ_EBU_BUSCON1 0x0064 +#define LTQ_EBU_ADDRSEL1 0x0024 +#define EBU_WRDIS 0x80000000 + +/* CGU - clock generation unit */ +#define LTQ_CGU_BASE_ADDR 0x1F103000 +#define LTQ_CGU_SIZE 0x1000 + +/* ICU - interrupt control unit */ +#define LTQ_ICU_BASE_ADDR 0x1F880200 +#define LTQ_ICU_SIZE 0x100 + +/* EIU - external interrupt unit */ +#define LTQ_EIU_BASE_ADDR 0x1F101000 +#define LTQ_EIU_SIZE 0x1000 + +/* PMU - power management unit */ +#define LTQ_PMU_BASE_ADDR 0x1F102000 +#define LTQ_PMU_SIZE 0x1000 + +#define PMU_DMA 0x0020 +#define PMU_USB 0x8041 +#define PMU_LED 0x0800 +#define PMU_GPT 0x1000 +#define PMU_PPE 0x2000 +#define PMU_FPI 0x4000 +#define PMU_SWITCH 0x10000000 + +/* ETOP - ethernet */ +#define LTQ_ETOP_BASE_ADDR 0x1E180000 +#define LTQ_ETOP_SIZE 0x40000 + +/* DMA */ +#define LTQ_DMA_BASE_ADDR 0x1E104100 +#define LTQ_DMA_SIZE 0x800 + +/* PCI */ +#define PCI_CR_BASE_ADDR 0x1E105400 +#define PCI_CR_SIZE 0x400 + +/* WDT */ +#define LTQ_WDT_BASE_ADDR 0x1F8803F0 +#define LTQ_WDT_SIZE 0x10 + +/* STP - serial to parallel conversion unit */ +#define LTQ_STP_BASE_ADDR 0x1E100BB0 +#define LTQ_STP_SIZE 0x40 + +/* GPIO */ +#define LTQ_GPIO0_BASE_ADDR 0x1E100B10 +#define LTQ_GPIO1_BASE_ADDR 0x1E100B40 +#define LTQ_GPIO2_BASE_ADDR 0x1E100B70 +#define LTQ_GPIO_SIZE 0x30 + +/* SSC */ +#define LTQ_SSC_BASE_ADDR 0x1e100800 +#define LTQ_SSC_SIZE 0x100 + +/* MEI - dsl core */ +#define LTQ_MEI_BASE_ADDR 0x1E116000 + +/* DEU - data encryption unit */ +#define LTQ_DEU_BASE_ADDR 0x1E103100 + +/* MPS - multi processor unit (voice) */ +#define LTQ_MPS_BASE_ADDR (KSEG1 + 0x1F107000) +#define LTQ_MPS_CHIPID ((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344)) + +/* request a non-gpio and set the PIO config */ +extern int ltq_gpio_request(unsigned int pin, unsigned int alt0, + unsigned int alt1, unsigned int dir, const char *name); +extern void ltq_pmu_enable(unsigned int module); +extern void ltq_pmu_disable(unsigned int module); + +static inline int ltq_is_ar9(void) +{ + return (ltq_get_soc_type() == SOC_TYPE_AR9); +} + +static inline int ltq_is_vr9(void) +{ + return (ltq_get_soc_type() == SOC_TYPE_VR9); +} + +#endif /* CONFIG_SOC_TYPE_XWAY */ +#endif /* _LTQ_XWAY_H__ */ diff --git a/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h new file mode 100644 index 0000000..872943a --- /dev/null +++ b/arch/mips/include/asm/mach-lantiq/xway/xway_dma.h @@ -0,0 +1,60 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#ifndef LTQ_DMA_H__ +#define LTQ_DMA_H__ + +#define LTQ_DESC_SIZE 0x08 /* each descriptor is 64bit */ +#define LTQ_DESC_NUM 0x40 /* 64 descriptors / channel */ + +#define LTQ_DMA_OWN BIT(31) /* owner bit */ +#define LTQ_DMA_C BIT(30) /* complete bit */ +#define LTQ_DMA_SOP BIT(29) /* start of packet */ +#define LTQ_DMA_EOP BIT(28) /* end of packet */ +#define LTQ_DMA_TX_OFFSET(x) ((x & 0x1f) << 23) /* data bytes offset */ +#define LTQ_DMA_RX_OFFSET(x) ((x & 0x7) << 23) /* data bytes offset */ +#define LTQ_DMA_SIZE_MASK (0xffff) /* the size field is 16 bit */ + +struct ltq_dma_desc { + u32 ctl; + u32 addr; +}; + +struct ltq_dma_channel { + int nr; /* the channel number */ + int irq; /* the mapped irq */ + int desc; /* the current descriptor */ + struct ltq_dma_desc *desc_base; /* the descriptor base */ + int phys; /* physical addr */ +}; + +enum { + DMA_PORT_ETOP = 0, + DMA_PORT_DEU, +}; + +extern void ltq_dma_enable_irq(struct ltq_dma_channel *ch); +extern void ltq_dma_disable_irq(struct ltq_dma_channel *ch); +extern void ltq_dma_ack_irq(struct ltq_dma_channel *ch); +extern void ltq_dma_open(struct ltq_dma_channel *ch); +extern void ltq_dma_close(struct ltq_dma_channel *ch); +extern void ltq_dma_alloc_tx(struct ltq_dma_channel *ch); +extern void ltq_dma_alloc_rx(struct ltq_dma_channel *ch); +extern void ltq_dma_free(struct ltq_dma_channel *ch); +extern void ltq_dma_init_port(int p); + +#endif diff --git a/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h b/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h new file mode 100644 index 0000000..3b72827 --- /dev/null +++ b/arch/mips/include/asm/mach-netlogic/cpu-feature-overrides.h @@ -0,0 +1,47 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2011 Netlogic Microsystems + * Copyright (C) 2003 Ralf Baechle + */ +#ifndef __ASM_MACH_NETLOGIC_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_NETLOGIC_CPU_FEATURE_OVERRIDES_H + +#define cpu_has_4kex 1 +#define cpu_has_4k_cache 1 +#define cpu_has_watch 1 +#define cpu_has_mips16 0 +#define cpu_has_counter 1 +#define cpu_has_divec 1 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 1 +#define cpu_has_mcheck 1 +#define cpu_has_ejtag 1 + +#define cpu_has_llsc 1 +#define cpu_has_vtag_icache 0 +#define cpu_has_dc_aliases 0 +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 +#define cpu_icache_snoops_remote_store 0 + +#define cpu_has_nofpuex 0 +#define cpu_has_64bits 1 + +#define cpu_has_mips32r1 1 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 1 +#define cpu_has_mips64r2 0 + +#define cpu_has_inclusive_pcaches 0 + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 32 + +#endif /* __ASM_MACH_NETLOGIC_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-netlogic/irq.h b/arch/mips/include/asm/mach-netlogic/irq.h new file mode 100644 index 0000000..b590245 --- /dev/null +++ b/arch/mips/include/asm/mach-netlogic/irq.h @@ -0,0 +1,14 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2011 Netlogic Microsystems. + */ +#ifndef __ASM_NETLOGIC_IRQ_H +#define __ASM_NETLOGIC_IRQ_H + +#define NR_IRQS 64 +#define MIPS_CPU_IRQ_BASE 0 + +#endif /* __ASM_NETLOGIC_IRQ_H */ diff --git a/arch/mips/include/asm/mach-netlogic/war.h b/arch/mips/include/asm/mach-netlogic/war.h new file mode 100644 index 0000000..22da893 --- /dev/null +++ b/arch/mips/include/asm/mach-netlogic/war.h @@ -0,0 +1,26 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2011 Netlogic Microsystems. + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_NLM_WAR_H +#define __ASM_MIPS_MACH_NLM_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_NLM_WAR_H */ diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h index d94085a..bc01a02 100644 --- a/arch/mips/include/asm/module.h +++ b/arch/mips/include/asm/module.h @@ -118,6 +118,8 @@ search_module_dbetables(unsigned long addr) #define MODULE_PROC_FAMILY "LOONGSON2 " #elif defined CONFIG_CPU_CAVIUM_OCTEON #define MODULE_PROC_FAMILY "OCTEON " +#elif defined CONFIG_CPU_XLR +#define MODULE_PROC_FAMILY "XLR " #else #error MODULE_PROC_FAMILY undefined for your processor configuration #endif diff --git a/arch/mips/include/asm/netlogic/interrupt.h b/arch/mips/include/asm/netlogic/interrupt.h new file mode 100644 index 0000000..a85aadb --- /dev/null +++ b/arch/mips/include/asm/netlogic/interrupt.h @@ -0,0 +1,45 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ASM_NLM_INTERRUPT_H +#define _ASM_NLM_INTERRUPT_H + +/* Defines for the IRQ numbers */ + +#define IRQ_IPI_SMP_FUNCTION 3 +#define IRQ_IPI_SMP_RESCHEDULE 4 +#define IRQ_MSGRING 6 +#define IRQ_TIMER 7 + +#endif diff --git a/arch/mips/include/asm/netlogic/mips-extns.h b/arch/mips/include/asm/netlogic/mips-extns.h new file mode 100644 index 0000000..8c53d0b --- /dev/null +++ b/arch/mips/include/asm/netlogic/mips-extns.h @@ -0,0 +1,76 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ASM_NLM_MIPS_EXTS_H +#define _ASM_NLM_MIPS_EXTS_H + +/* + * XLR and XLP interrupt request and interrupt mask registers + */ +#define read_c0_eirr() __read_64bit_c0_register($9, 6) +#define read_c0_eimr() __read_64bit_c0_register($9, 7) +#define write_c0_eirr(val) __write_64bit_c0_register($9, 6, val) + +/* + * Writing EIMR in 32 bit is a special case, the lower 8 bit of the + * EIMR is shadowed in the status register, so we cannot save and + * restore status register for split read. + */ +#define write_c0_eimr(val) \ +do { \ + if (sizeof(unsigned long) == 4) { \ + unsigned long __flags; \ + \ + local_irq_save(__flags); \ + __asm__ __volatile__( \ + ".set\tmips64\n\t" \ + "dsll\t%L0, %L0, 32\n\t" \ + "dsrl\t%L0, %L0, 32\n\t" \ + "dsll\t%M0, %M0, 32\n\t" \ + "or\t%L0, %L0, %M0\n\t" \ + "dmtc0\t%L0, $9, 7\n\t" \ + ".set\tmips0" \ + : : "r" (val)); \ + __flags = (__flags & 0xffff00ff) | (((val) & 0xff) << 8);\ + local_irq_restore(__flags); \ + } else \ + __write_64bit_c0_register($9, 7, (val)); \ +} while (0) + +static inline int hard_smp_processor_id(void) +{ + return __read_32bit_c0_register($15, 1) & 0x3ff; +} + +#endif /*_ASM_NLM_MIPS_EXTS_H */ diff --git a/arch/mips/include/asm/netlogic/psb-bootinfo.h b/arch/mips/include/asm/netlogic/psb-bootinfo.h new file mode 100644 index 0000000..6878307 --- /dev/null +++ b/arch/mips/include/asm/netlogic/psb-bootinfo.h @@ -0,0 +1,109 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ASM_NETLOGIC_BOOTINFO_H +#define _ASM_NETLOGIC_BOOTINFO_H + +struct psb_info { + uint64_t boot_level; + uint64_t io_base; + uint64_t output_device; + uint64_t uart_print; + uint64_t led_output; + uint64_t init; + uint64_t exit; + uint64_t warm_reset; + uint64_t wakeup; + uint64_t online_cpu_map; + uint64_t master_reentry_sp; + uint64_t master_reentry_gp; + uint64_t master_reentry_fn; + uint64_t slave_reentry_fn; + uint64_t magic_dword; + uint64_t uart_putchar; + uint64_t size; + uint64_t uart_getchar; + uint64_t nmi_handler; + uint64_t psb_version; + uint64_t mac_addr; + uint64_t cpu_frequency; + uint64_t board_version; + uint64_t malloc; + uint64_t free; + uint64_t global_shmem_addr; + uint64_t global_shmem_size; + uint64_t psb_os_cpu_map; + uint64_t userapp_cpu_map; + uint64_t wakeup_os; + uint64_t psb_mem_map; + uint64_t board_major_version; + uint64_t board_minor_version; + uint64_t board_manf_revision; + uint64_t board_serial_number; + uint64_t psb_physaddr_map; + uint64_t xlr_loaderip_config; + uint64_t bldr_envp; + uint64_t avail_mem_map; +}; + +enum { + NETLOGIC_IO_SPACE = 0x10, + PCIX_IO_SPACE, + PCIX_CFG_SPACE, + PCIX_MEMORY_SPACE, + HT_IO_SPACE, + HT_CFG_SPACE, + HT_MEMORY_SPACE, + SRAM_SPACE, + FLASH_CONTROLLER_SPACE +}; + +#define NLM_MAX_ARGS 64 +#define NLM_MAX_ENVS 32 + +/* This is what netlboot passes and linux boot_mem_map is subtly different */ +#define NLM_BOOT_MEM_MAP_MAX 32 +struct nlm_boot_mem_map { + int nr_map; + struct nlm_boot_mem_map_entry { + uint64_t addr; /* start of memory segment */ + uint64_t size; /* size of memory segment */ + uint32_t type; /* type of memory segment */ + } map[NLM_BOOT_MEM_MAP_MAX]; +}; + +/* Pointer to saved boot loader info */ +extern struct psb_info nlm_prom_info; + +#endif diff --git a/arch/mips/include/asm/netlogic/xlr/gpio.h b/arch/mips/include/asm/netlogic/xlr/gpio.h new file mode 100644 index 0000000..51f6ad4 --- /dev/null +++ b/arch/mips/include/asm/netlogic/xlr/gpio.h @@ -0,0 +1,73 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ASM_NLM_GPIO_H +#define _ASM_NLM_GPIO_H + +#define NETLOGIC_GPIO_INT_EN_REG 0 +#define NETLOGIC_GPIO_INPUT_INVERSION_REG 1 +#define NETLOGIC_GPIO_IO_DIR_REG 2 +#define NETLOGIC_GPIO_IO_DATA_WR_REG 3 +#define NETLOGIC_GPIO_IO_DATA_RD_REG 4 + +#define NETLOGIC_GPIO_SWRESET_REG 8 +#define NETLOGIC_GPIO_DRAM1_CNTRL_REG 9 +#define NETLOGIC_GPIO_DRAM1_RATIO_REG 10 +#define NETLOGIC_GPIO_DRAM1_RESET_REG 11 +#define NETLOGIC_GPIO_DRAM1_STATUS_REG 12 +#define NETLOGIC_GPIO_DRAM2_CNTRL_REG 13 +#define NETLOGIC_GPIO_DRAM2_RATIO_REG 14 +#define NETLOGIC_GPIO_DRAM2_RESET_REG 15 +#define NETLOGIC_GPIO_DRAM2_STATUS_REG 16 + +#define NETLOGIC_GPIO_PWRON_RESET_CFG_REG 21 +#define NETLOGIC_GPIO_BIST_ALL_GO_STATUS_REG 24 +#define NETLOGIC_GPIO_BIST_CPU_GO_STATUS_REG 25 +#define NETLOGIC_GPIO_BIST_DEV_GO_STATUS_REG 26 + +#define NETLOGIC_GPIO_FUSE_BANK_REG 35 +#define NETLOGIC_GPIO_CPU_RESET_REG 40 +#define NETLOGIC_GPIO_RNG_REG 43 + +#define NETLOGIC_PWRON_RESET_PCMCIA_BOOT 17 +#define NETLOGIC_GPIO_LED_BITMAP 0x1700000 +#define NETLOGIC_GPIO_LED_0_SHIFT 20 +#define NETLOGIC_GPIO_LED_1_SHIFT 24 + +#define NETLOGIC_GPIO_LED_OUTPUT_CODE_RESET 0x01 +#define NETLOGIC_GPIO_LED_OUTPUT_CODE_HARD_RESET 0x02 +#define NETLOGIC_GPIO_LED_OUTPUT_CODE_SOFT_RESET 0x03 +#define NETLOGIC_GPIO_LED_OUTPUT_CODE_MAIN 0x04 + +#endif diff --git a/arch/mips/include/asm/netlogic/xlr/iomap.h b/arch/mips/include/asm/netlogic/xlr/iomap.h new file mode 100644 index 0000000..2e3a4dd --- /dev/null +++ b/arch/mips/include/asm/netlogic/xlr/iomap.h @@ -0,0 +1,131 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ASM_NLM_IOMAP_H +#define _ASM_NLM_IOMAP_H + +#define DEFAULT_NETLOGIC_IO_BASE CKSEG1ADDR(0x1ef00000) +#define NETLOGIC_IO_DDR2_CHN0_OFFSET 0x01000 +#define NETLOGIC_IO_DDR2_CHN1_OFFSET 0x02000 +#define NETLOGIC_IO_DDR2_CHN2_OFFSET 0x03000 +#define NETLOGIC_IO_DDR2_CHN3_OFFSET 0x04000 +#define NETLOGIC_IO_PIC_OFFSET 0x08000 +#define NETLOGIC_IO_UART_0_OFFSET 0x14000 +#define NETLOGIC_IO_UART_1_OFFSET 0x15100 + +#define NETLOGIC_IO_SIZE 0x1000 + +#define NETLOGIC_IO_BRIDGE_OFFSET 0x00000 + +#define NETLOGIC_IO_RLD2_CHN0_OFFSET 0x05000 +#define NETLOGIC_IO_RLD2_CHN1_OFFSET 0x06000 + +#define NETLOGIC_IO_SRAM_OFFSET 0x07000 + +#define NETLOGIC_IO_PCIX_OFFSET 0x09000 +#define NETLOGIC_IO_HT_OFFSET 0x0A000 + +#define NETLOGIC_IO_SECURITY_OFFSET 0x0B000 + +#define NETLOGIC_IO_GMAC_0_OFFSET 0x0C000 +#define NETLOGIC_IO_GMAC_1_OFFSET 0x0D000 +#define NETLOGIC_IO_GMAC_2_OFFSET 0x0E000 +#define NETLOGIC_IO_GMAC_3_OFFSET 0x0F000 + +/* XLS devices */ +#define NETLOGIC_IO_GMAC_4_OFFSET 0x20000 +#define NETLOGIC_IO_GMAC_5_OFFSET 0x21000 +#define NETLOGIC_IO_GMAC_6_OFFSET 0x22000 +#define NETLOGIC_IO_GMAC_7_OFFSET 0x23000 + +#define NETLOGIC_IO_PCIE_0_OFFSET 0x1E000 +#define NETLOGIC_IO_PCIE_1_OFFSET 0x1F000 +#define NETLOGIC_IO_SRIO_0_OFFSET 0x1E000 +#define NETLOGIC_IO_SRIO_1_OFFSET 0x1F000 + +#define NETLOGIC_IO_USB_0_OFFSET 0x24000 +#define NETLOGIC_IO_USB_1_OFFSET 0x25000 + +#define NETLOGIC_IO_COMP_OFFSET 0x1D000 +/* end XLS devices */ + +/* XLR devices */ +#define NETLOGIC_IO_SPI4_0_OFFSET 0x10000 +#define NETLOGIC_IO_XGMAC_0_OFFSET 0x11000 +#define NETLOGIC_IO_SPI4_1_OFFSET 0x12000 +#define NETLOGIC_IO_XGMAC_1_OFFSET 0x13000 +/* end XLR devices */ + +#define NETLOGIC_IO_I2C_0_OFFSET 0x16000 +#define NETLOGIC_IO_I2C_1_OFFSET 0x17000 + +#define NETLOGIC_IO_GPIO_OFFSET 0x18000 +#define NETLOGIC_IO_FLASH_OFFSET 0x19000 +#define NETLOGIC_IO_TB_OFFSET 0x1C000 + +#define NETLOGIC_CPLD_OFFSET KSEG1ADDR(0x1d840000) + +/* + * Base Address (Virtual) of the PCI Config address space + * For now, choose 256M phys in kseg1 = 0xA0000000 + (1<<28) + * Config space spans 256 (num of buses) * 256 (num functions) * 256 bytes + * ie 1<<24 = 16M + */ +#define DEFAULT_PCI_CONFIG_BASE 0x18000000 +#define DEFAULT_HT_TYPE0_CFG_BASE 0x16000000 +#define DEFAULT_HT_TYPE1_CFG_BASE 0x17000000 + +#ifndef __ASSEMBLY__ +#include <linux/types.h> +#include <asm/byteorder.h> + +typedef volatile __u32 nlm_reg_t; +extern unsigned long netlogic_io_base; + +/* FIXME read once in write_reg */ +#ifdef CONFIG_CPU_LITTLE_ENDIAN +#define netlogic_read_reg(base, offset) ((base)[(offset)]) +#define netlogic_write_reg(base, offset, value) ((base)[(offset)] = (value)) +#else +#define netlogic_read_reg(base, offset) (be32_to_cpu((base)[(offset)])) +#define netlogic_write_reg(base, offset, value) \ + ((base)[(offset)] = cpu_to_be32((value))) +#endif + +#define netlogic_read_reg_le32(base, offset) (le32_to_cpu((base)[(offset)])) +#define netlogic_write_reg_le32(base, offset, value) \ + ((base)[(offset)] = cpu_to_le32((value))) +#define netlogic_io_mmio(offset) ((nlm_reg_t *)(netlogic_io_base+(offset))) +#endif /* __ASSEMBLY__ */ +#endif diff --git a/arch/mips/include/asm/netlogic/xlr/pic.h b/arch/mips/include/asm/netlogic/xlr/pic.h new file mode 100644 index 0000000..5cceb74 --- /dev/null +++ b/arch/mips/include/asm/netlogic/xlr/pic.h @@ -0,0 +1,231 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ASM_NLM_XLR_PIC_H +#define _ASM_NLM_XLR_PIC_H + +#define PIC_CLKS_PER_SEC 66666666ULL +/* PIC hardware interrupt numbers */ +#define PIC_IRT_WD_INDEX 0 +#define PIC_IRT_TIMER_0_INDEX 1 +#define PIC_IRT_TIMER_1_INDEX 2 +#define PIC_IRT_TIMER_2_INDEX 3 +#define PIC_IRT_TIMER_3_INDEX 4 +#define PIC_IRT_TIMER_4_INDEX 5 +#define PIC_IRT_TIMER_5_INDEX 6 +#define PIC_IRT_TIMER_6_INDEX 7 +#define PIC_IRT_TIMER_7_INDEX 8 +#define PIC_IRT_CLOCK_INDEX PIC_IRT_TIMER_7_INDEX +#define PIC_IRT_UART_0_INDEX 9 +#define PIC_IRT_UART_1_INDEX 10 +#define PIC_IRT_I2C_0_INDEX 11 +#define PIC_IRT_I2C_1_INDEX 12 +#define PIC_IRT_PCMCIA_INDEX 13 +#define PIC_IRT_GPIO_INDEX 14 +#define PIC_IRT_HYPER_INDEX 15 +#define PIC_IRT_PCIX_INDEX 16 +/* XLS */ +#define PIC_IRT_CDE_INDEX 15 +#define PIC_IRT_BRIDGE_TB_XLS_INDEX 16 +/* XLS */ +#define PIC_IRT_GMAC0_INDEX 17 +#define PIC_IRT_GMAC1_INDEX 18 +#define PIC_IRT_GMAC2_INDEX 19 +#define PIC_IRT_GMAC3_INDEX 20 +#define PIC_IRT_XGS0_INDEX 21 +#define PIC_IRT_XGS1_INDEX 22 +#define PIC_IRT_HYPER_FATAL_INDEX 23 +#define PIC_IRT_PCIX_FATAL_INDEX 24 +#define PIC_IRT_BRIDGE_AERR_INDEX 25 +#define PIC_IRT_BRIDGE_BERR_INDEX 26 +#define PIC_IRT_BRIDGE_TB_XLR_INDEX 27 +#define PIC_IRT_BRIDGE_AERR_NMI_INDEX 28 +/* XLS */ +#define PIC_IRT_GMAC4_INDEX 21 +#define PIC_IRT_GMAC5_INDEX 22 +#define PIC_IRT_GMAC6_INDEX 23 +#define PIC_IRT_GMAC7_INDEX 24 +#define PIC_IRT_BRIDGE_ERR_INDEX 25 +#define PIC_IRT_PCIE_LINK0_INDEX 26 +#define PIC_IRT_PCIE_LINK1_INDEX 27 +#define PIC_IRT_PCIE_LINK2_INDEX 23 +#define PIC_IRT_PCIE_LINK3_INDEX 24 +#define PIC_IRT_PCIE_XLSB0_LINK2_INDEX 28 +#define PIC_IRT_PCIE_XLSB0_LINK3_INDEX 29 +#define PIC_IRT_SRIO_LINK0_INDEX 26 +#define PIC_IRT_SRIO_LINK1_INDEX 27 +#define PIC_IRT_SRIO_LINK2_INDEX 28 +#define PIC_IRT_SRIO_LINK3_INDEX 29 +#define PIC_IRT_PCIE_INT_INDEX 28 +#define PIC_IRT_PCIE_FATAL_INDEX 29 +#define PIC_IRT_GPIO_B_INDEX 30 +#define PIC_IRT_USB_INDEX 31 +/* XLS */ +#define PIC_NUM_IRTS 32 + + +#define PIC_CLOCK_TIMER 7 + +/* PIC Registers */ +#define PIC_CTRL 0x00 +#define PIC_IPI 0x04 +#define PIC_INT_ACK 0x06 + +#define WD_MAX_VAL_0 0x08 +#define WD_MAX_VAL_1 0x09 +#define WD_MASK_0 0x0a +#define WD_MASK_1 0x0b +#define WD_HEARBEAT_0 0x0c +#define WD_HEARBEAT_1 0x0d + +#define PIC_IRT_0_BASE 0x40 +#define PIC_IRT_1_BASE 0x80 +#define PIC_TIMER_MAXVAL_0_BASE 0x100 +#define PIC_TIMER_MAXVAL_1_BASE 0x110 +#define PIC_TIMER_COUNT_0_BASE 0x120 +#define PIC_TIMER_COUNT_1_BASE 0x130 + +#define PIC_IRT_0(picintr) (PIC_IRT_0_BASE + (picintr)) +#define PIC_IRT_1(picintr) (PIC_IRT_1_BASE + (picintr)) + +#define PIC_TIMER_MAXVAL_0(i) (PIC_TIMER_MAXVAL_0_BASE + (i)) +#define PIC_TIMER_MAXVAL_1(i) (PIC_TIMER_MAXVAL_1_BASE + (i)) +#define PIC_TIMER_COUNT_0(i) (PIC_TIMER_COUNT_0_BASE + (i)) +#define PIC_TIMER_COUNT_1(i) (PIC_TIMER_COUNT_0_BASE + (i)) + +/* + * Mapping between hardware interrupt numbers and IRQs on CPU + * we use a simple scheme to map PIC interrupts 0-31 to IRQs + * 8-39. This leaves the IRQ 0-7 for cpu interrupts like + * count/compare and FMN + */ +#define PIC_IRQ_BASE 8 +#define PIC_INTR_TO_IRQ(i) (PIC_IRQ_BASE + (i)) +#define PIC_IRQ_TO_INTR(i) ((i) - PIC_IRQ_BASE) + +#define PIC_IRT_FIRST_IRQ PIC_IRQ_BASE +#define PIC_WD_IRQ PIC_INTR_TO_IRQ(PIC_IRT_WD_INDEX) +#define PIC_TIMER_0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_0_INDEX) +#define PIC_TIMER_1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_1_INDEX) +#define PIC_TIMER_2_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_2_INDEX) +#define PIC_TIMER_3_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_3_INDEX) +#define PIC_TIMER_4_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_4_INDEX) +#define PIC_TIMER_5_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_5_INDEX) +#define PIC_TIMER_6_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_6_INDEX) +#define PIC_TIMER_7_IRQ PIC_INTR_TO_IRQ(PIC_IRT_TIMER_7_INDEX) +#define PIC_CLOCK_IRQ (PIC_TIMER_7_IRQ) +#define PIC_UART_0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_UART_0_INDEX) +#define PIC_UART_1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_UART_1_INDEX) +#define PIC_I2C_0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_I2C_0_INDEX) +#define PIC_I2C_1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_I2C_1_INDEX) +#define PIC_PCMCIA_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCMCIA_INDEX) +#define PIC_GPIO_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GPIO_INDEX) +#define PIC_HYPER_IRQ PIC_INTR_TO_IRQ(PIC_IRT_HYPER_INDEX) +#define PIC_PCIX_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIX_INDEX) +/* XLS */ +#define PIC_CDE_IRQ PIC_INTR_TO_IRQ(PIC_IRT_CDE_INDEX) +#define PIC_BRIDGE_TB_XLS_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_TB_XLS_INDEX) +/* end XLS */ +#define PIC_GMAC_0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC0_INDEX) +#define PIC_GMAC_1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC1_INDEX) +#define PIC_GMAC_2_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC2_INDEX) +#define PIC_GMAC_3_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC3_INDEX) +#define PIC_XGS_0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_XGS0_INDEX) +#define PIC_XGS_1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_XGS1_INDEX) +#define PIC_HYPER_FATAL_IRQ PIC_INTR_TO_IRQ(PIC_IRT_HYPER_FATAL_INDEX) +#define PIC_PCIX_FATAL_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIX_FATAL_INDEX) +#define PIC_BRIDGE_AERR_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_AERR_INDEX) +#define PIC_BRIDGE_BERR_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_BERR_INDEX) +#define PIC_BRIDGE_TB_XLR_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_TB_XLR_INDEX) +#define PIC_BRIDGE_AERR_NMI_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_AERR_NMI_INDEX) +/* XLS defines */ +#define PIC_GMAC_4_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC4_INDEX) +#define PIC_GMAC_5_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC5_INDEX) +#define PIC_GMAC_6_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC6_INDEX) +#define PIC_GMAC_7_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GMAC7_INDEX) +#define PIC_BRIDGE_ERR_IRQ PIC_INTR_TO_IRQ(PIC_IRT_BRIDGE_ERR_INDEX) +#define PIC_PCIE_LINK0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_LINK0_INDEX) +#define PIC_PCIE_LINK1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_LINK1_INDEX) +#define PIC_PCIE_LINK2_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_LINK2_INDEX) +#define PIC_PCIE_LINK3_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_LINK3_INDEX) +#define PIC_PCIE_XLSB0_LINK2_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_XLSB0_LINK2_INDEX) +#define PIC_PCIE_XLSB0_LINK3_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_XLSB0_LINK3_INDEX) +#define PIC_SRIO_LINK0_IRQ PIC_INTR_TO_IRQ(PIC_IRT_SRIO_LINK0_INDEX) +#define PIC_SRIO_LINK1_IRQ PIC_INTR_TO_IRQ(PIC_IRT_SRIO_LINK1_INDEX) +#define PIC_SRIO_LINK2_IRQ PIC_INTR_TO_IRQ(PIC_IRT_SRIO_LINK2_INDEX) +#define PIC_SRIO_LINK3_IRQ PIC_INTR_TO_IRQ(PIC_IRT_SRIO_LINK3_INDEX) +#define PIC_PCIE_INT_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_INT__INDEX) +#define PIC_PCIE_FATAL_IRQ PIC_INTR_TO_IRQ(PIC_IRT_PCIE_FATAL_INDEX) +#define PIC_GPIO_B_IRQ PIC_INTR_TO_IRQ(PIC_IRT_GPIO_B_INDEX) +#define PIC_USB_IRQ PIC_INTR_TO_IRQ(PIC_IRT_USB_INDEX) +#define PIC_IRT_LAST_IRQ PIC_USB_IRQ +/* end XLS */ + +#ifndef __ASSEMBLY__ +static inline void pic_send_ipi(u32 ipi) +{ + nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); + + netlogic_write_reg(mmio, PIC_IPI, ipi); +} + +static inline u32 pic_read_control(void) +{ + nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); + + return netlogic_read_reg(mmio, PIC_CTRL); +} + +static inline void pic_write_control(u32 control) +{ + nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); + + netlogic_write_reg(mmio, PIC_CTRL, control); +} + +static inline void pic_update_control(u32 control) +{ + nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); + + netlogic_write_reg(mmio, PIC_CTRL, + (control | netlogic_read_reg(mmio, PIC_CTRL))); +} + +#define PIC_IRQ_IS_EDGE_TRIGGERED(irq) (((irq) >= PIC_TIMER_0_IRQ) && \ + ((irq) <= PIC_TIMER_7_IRQ)) +#define PIC_IRQ_IS_IRT(irq) (((irq) >= PIC_IRT_FIRST_IRQ) && \ + ((irq) <= PIC_IRT_LAST_IRQ)) +#endif + +#endif /* _ASM_NLM_XLR_PIC_H */ diff --git a/arch/mips/include/asm/netlogic/xlr/xlr.h b/arch/mips/include/asm/netlogic/xlr/xlr.h new file mode 100644 index 0000000..3e63726 --- /dev/null +++ b/arch/mips/include/asm/netlogic/xlr/xlr.h @@ -0,0 +1,75 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _ASM_NLM_XLR_H +#define _ASM_NLM_XLR_H + +/* Platform UART functions */ +struct uart_port; +unsigned int nlm_xlr_uart_in(struct uart_port *, int); +void nlm_xlr_uart_out(struct uart_port *, int, int); + +/* SMP support functions */ +struct irq_desc; +void nlm_smp_function_ipi_handler(unsigned int irq, struct irq_desc *desc); +void nlm_smp_resched_ipi_handler(unsigned int irq, struct irq_desc *desc); +int nlm_wakeup_secondary_cpus(u32 wakeup_mask); +void nlm_smp_irq_init(void); +void nlm_boot_smp_nmi(void); +void prom_pre_boot_secondary_cpus(void); + +extern struct plat_smp_ops nlm_smp_ops; +extern unsigned long nlm_common_ebase; + +/* XLS B silicon "Rook" */ +static inline unsigned int nlm_chip_is_xls_b(void) +{ + uint32_t prid = read_c0_prid(); + + return ((prid & 0xf000) == 0x4000); +} + +/* + * XLR chip types + */ + /* The XLS product line has chip versions 0x[48c]? */ +static inline unsigned int nlm_chip_is_xls(void) +{ + uint32_t prid = read_c0_prid(); + + return ((prid & 0xf000) == 0x8000 || (prid & 0xf000) == 0x4000 || + (prid & 0xf000) == 0xc000); +} + +#endif /* _ASM_NLM_XLR_H */ diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h index 9f1b8db..de39b1f 100644 --- a/arch/mips/include/asm/ptrace.h +++ b/arch/mips/include/asm/ptrace.h @@ -141,7 +141,8 @@ extern int ptrace_set_watch_regs(struct task_struct *child, #define instruction_pointer(regs) ((regs)->cp0_epc) #define profile_pc(regs) instruction_pointer(regs) -extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit); +extern asmlinkage void syscall_trace_enter(struct pt_regs *regs); +extern asmlinkage void syscall_trace_leave(struct pt_regs *regs); extern NORET_TYPE void die(const char *, struct pt_regs *) ATTRIB_NORET; diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h index d71160d..97f8bf6 100644 --- a/arch/mips/include/asm/thread_info.h +++ b/arch/mips/include/asm/thread_info.h @@ -149,6 +149,9 @@ register struct thread_info *__current_thread_info __asm__("$28"); #define _TIF_FPUBOUND (1<<TIF_FPUBOUND) #define _TIF_LOAD_WATCH (1<<TIF_LOAD_WATCH) +/* work to do in syscall_trace_leave() */ +#define _TIF_WORK_SYSCALL_EXIT (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT) + /* work to do on interrupt/exception return */ #define _TIF_WORK_MASK (0x0000ffef & \ ~(_TIF_SECCOMP | _TIF_SYSCALL_AUDIT)) diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h index c7f1bfe..bc14447 100644 --- a/arch/mips/include/asm/time.h +++ b/arch/mips/include/asm/time.h @@ -84,12 +84,6 @@ static inline int init_mips_clocksource(void) #endif } -static inline void clocksource_set_clock(struct clocksource *cs, - unsigned int clock) -{ - clocksource_calc_mult_shift(cs, clock, 4); -} - static inline void clockevent_set_clock(struct clock_event_device *cd, unsigned int clock) { diff --git a/arch/mips/jazz/jazzdma.c b/arch/mips/jazz/jazzdma.c index 9ce9f64..2d8e447 100644 --- a/arch/mips/jazz/jazzdma.c +++ b/arch/mips/jazz/jazzdma.c @@ -211,7 +211,7 @@ EXPORT_SYMBOL(vdma_free); */ int vdma_remap(unsigned long laddr, unsigned long paddr, unsigned long size) { - int first, pages, npages; + int first, pages; if (laddr > 0xffffff) { if (vdma_debug) @@ -228,8 +228,7 @@ int vdma_remap(unsigned long laddr, unsigned long paddr, unsigned long size) return -EINVAL; /* invalid physical address */ } - npages = pages = - (((paddr & (VDMA_PAGESIZE - 1)) + size) >> 12) + 1; + pages = (((paddr & (VDMA_PAGESIZE - 1)) + size) >> 12) + 1; first = laddr >> 12; if (vdma_debug) printk("vdma_remap: first=%x, pages=%x\n", first, pages); diff --git a/arch/mips/jz4740/dma.c b/arch/mips/jz4740/dma.c index 5ebe75a..d7feb89 100644 --- a/arch/mips/jz4740/dma.c +++ b/arch/mips/jz4740/dma.c @@ -242,9 +242,7 @@ EXPORT_SYMBOL_GPL(jz4740_dma_get_residue); static void jz4740_dma_chan_irq(struct jz4740_dma_chan *dma) { - uint32_t status; - - status = jz4740_dma_read(JZ_REG_DMA_STATUS_CTRL(dma->id)); + (void) jz4740_dma_read(JZ_REG_DMA_STATUS_CTRL(dma->id)); jz4740_dma_write_mask(JZ_REG_DMA_STATUS_CTRL(dma->id), 0, JZ_DMA_STATUS_CTRL_ENABLE | JZ_DMA_STATUS_CTRL_TRANSFER_DONE); diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c index 6a9e14d..d97cfbf 100644 --- a/arch/mips/jz4740/setup.c +++ b/arch/mips/jz4740/setup.c @@ -1,5 +1,6 @@ /* * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de> + * Copyright (C) 2011, Maarten ter Huurne <maarten@treewalker.org> * JZ4740 setup code * * This program is free software; you can redistribute it and/or modify it @@ -14,13 +15,44 @@ */ #include <linux/init.h> +#include <linux/io.h> #include <linux/kernel.h> +#include <asm/bootinfo.h> + +#include <asm/mach-jz4740/base.h> + #include "reset.h" + +#define JZ4740_EMC_SDRAM_CTRL 0x80 + + +static void __init jz4740_detect_mem(void) +{ + void __iomem *jz_emc_base; + u32 ctrl, bus, bank, rows, cols; + phys_t size; + + jz_emc_base = ioremap(JZ4740_EMC_BASE_ADDR, 0x100); + ctrl = readl(jz_emc_base + JZ4740_EMC_SDRAM_CTRL); + bus = 2 - ((ctrl >> 31) & 1); + bank = 1 + ((ctrl >> 19) & 1); + cols = 8 + ((ctrl >> 26) & 7); + rows = 11 + ((ctrl >> 20) & 3); + printk(KERN_DEBUG + "SDRAM preconfigured: bus:%u bank:%u rows:%u cols:%u\n", + bus, bank, rows, cols); + iounmap(jz_emc_base); + + size = 1 << (bus + bank + cols + rows); + add_memory_region(0, size, BOOT_MEM_RAM); +} + void __init plat_mem_setup(void) { jz4740_reset_init(); + jz4740_detect_mem(); } const char *get_system_type(void) diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c index fe01678..f83c2dd 100644 --- a/arch/mips/jz4740/time.c +++ b/arch/mips/jz4740/time.c @@ -89,7 +89,7 @@ static int jz4740_clockevent_set_next(unsigned long evt, static struct clock_event_device jz4740_clockevent = { .name = "jz4740-timer", - .features = CLOCK_EVT_FEAT_PERIODIC, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_next_event = jz4740_clockevent_set_next, .set_mode = jz4740_clockevent_set_mode, .rating = 200, @@ -121,8 +121,7 @@ void __init plat_time_init(void) clockevents_register_device(&jz4740_clockevent); - clocksource_set_clock(&jz4740_clocksource, clk_rate); - ret = clocksource_register(&jz4740_clocksource); + ret = clocksource_register_hz(&jz4740_clocksource, clk_rate); if (ret) printk(KERN_ERR "Failed to register clocksource: %d\n", ret); diff --git a/arch/mips/jz4740/timer.c b/arch/mips/jz4740/timer.c index b2c0151..654d5c3 100644 --- a/arch/mips/jz4740/timer.c +++ b/arch/mips/jz4740/timer.c @@ -27,11 +27,13 @@ void jz4740_timer_enable_watchdog(void) { writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_CLEAR); } +EXPORT_SYMBOL_GPL(jz4740_timer_enable_watchdog); void jz4740_timer_disable_watchdog(void) { writel(BIT(16), jz4740_timer_base + JZ_REG_TIMER_STOP_SET); } +EXPORT_SYMBOL_GPL(jz4740_timer_disable_watchdog); void __init jz4740_timer_init(void) { diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index cedee2b..83bba33 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -52,6 +52,7 @@ obj-$(CONFIG_CPU_TX39XX) += r2300_fpu.o r2300_switch.o obj-$(CONFIG_CPU_TX49XX) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_VR41XX) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_CAVIUM_OCTEON) += octeon_switch.o +obj-$(CONFIG_CPU_XLR) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_SMP_UP) += smp-up.o diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c index 0b73773..f0ab92a 100644 --- a/arch/mips/kernel/cevt-txx9.c +++ b/arch/mips/kernel/cevt-txx9.c @@ -51,8 +51,7 @@ void __init txx9_clocksource_init(unsigned long baseaddr, { struct txx9_tmr_reg __iomem *tmrptr; - clocksource_set_clock(&txx9_clocksource.cs, TIMER_CLK(imbusclk)); - clocksource_register(&txx9_clocksource.cs); + clocksource_register_hz(&txx9_clocksource.cs, TIMER_CLK(imbusclk)); tmrptr = ioremap(baseaddr, sizeof(struct txx9_tmr_reg)); __raw_writel(TCR_BASE, &tmrptr->tcr); diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index f65d4c8..bb133d1 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -291,6 +291,12 @@ static inline int cpu_has_confreg(void) #endif } +static inline void set_elf_platform(int cpu, const char *plat) +{ + if (cpu == 0) + __elf_platform = plat; +} + /* * Get the FPU Implementation/Revision. */ @@ -614,6 +620,16 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) case PRID_IMP_LOONGSON2: c->cputype = CPU_LOONGSON2; __cpu_name[cpu] = "ICT Loongson-2"; + + switch (c->processor_id & PRID_REV_MASK) { + case PRID_REV_LOONGSON2E: + set_elf_platform(cpu, "loongson2e"); + break; + case PRID_REV_LOONGSON2F: + set_elf_platform(cpu, "loongson2f"); + break; + } + c->isa_level = MIPS_CPU_ISA_III; c->options = R4K_OPTS | MIPS_CPU_FPU | MIPS_CPU_LLSC | @@ -911,12 +927,14 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu) case PRID_IMP_BMIPS32_REV8: c->cputype = CPU_BMIPS32; __cpu_name[cpu] = "Broadcom BMIPS32"; + set_elf_platform(cpu, "bmips32"); break; case PRID_IMP_BMIPS3300: case PRID_IMP_BMIPS3300_ALT: case PRID_IMP_BMIPS3300_BUG: c->cputype = CPU_BMIPS3300; __cpu_name[cpu] = "Broadcom BMIPS3300"; + set_elf_platform(cpu, "bmips3300"); break; case PRID_IMP_BMIPS43XX: { int rev = c->processor_id & 0xff; @@ -925,15 +943,18 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu) rev <= PRID_REV_BMIPS4380_HI) { c->cputype = CPU_BMIPS4380; __cpu_name[cpu] = "Broadcom BMIPS4380"; + set_elf_platform(cpu, "bmips4380"); } else { c->cputype = CPU_BMIPS4350; __cpu_name[cpu] = "Broadcom BMIPS4350"; + set_elf_platform(cpu, "bmips4350"); } break; } case PRID_IMP_BMIPS5000: c->cputype = CPU_BMIPS5000; __cpu_name[cpu] = "Broadcom BMIPS5000"; + set_elf_platform(cpu, "bmips5000"); c->options |= MIPS_CPU_ULRI; break; } @@ -956,14 +977,12 @@ static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu) c->cputype = CPU_CAVIUM_OCTEON_PLUS; __cpu_name[cpu] = "Cavium Octeon+"; platform: - if (cpu == 0) - __elf_platform = "octeon"; + set_elf_platform(cpu, "octeon"); break; case PRID_IMP_CAVIUM_CN63XX: c->cputype = CPU_CAVIUM_OCTEON2; __cpu_name[cpu] = "Cavium Octeon II"; - if (cpu == 0) - __elf_platform = "octeon2"; + set_elf_platform(cpu, "octeon2"); break; default: printk(KERN_INFO "Unknown Octeon chip!\n"); @@ -988,6 +1007,59 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu) } } +static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu) +{ + decode_configs(c); + + c->options = (MIPS_CPU_TLB | + MIPS_CPU_4KEX | + MIPS_CPU_COUNTER | + MIPS_CPU_DIVEC | + MIPS_CPU_WATCH | + MIPS_CPU_EJTAG | + MIPS_CPU_LLSC); + + switch (c->processor_id & 0xff00) { + case PRID_IMP_NETLOGIC_XLR732: + case PRID_IMP_NETLOGIC_XLR716: + case PRID_IMP_NETLOGIC_XLR532: + case PRID_IMP_NETLOGIC_XLR308: + case PRID_IMP_NETLOGIC_XLR532C: + case PRID_IMP_NETLOGIC_XLR516C: + case PRID_IMP_NETLOGIC_XLR508C: + case PRID_IMP_NETLOGIC_XLR308C: + c->cputype = CPU_XLR; + __cpu_name[cpu] = "Netlogic XLR"; + break; + + case PRID_IMP_NETLOGIC_XLS608: + case PRID_IMP_NETLOGIC_XLS408: + case PRID_IMP_NETLOGIC_XLS404: + case PRID_IMP_NETLOGIC_XLS208: + case PRID_IMP_NETLOGIC_XLS204: + case PRID_IMP_NETLOGIC_XLS108: + case PRID_IMP_NETLOGIC_XLS104: + case PRID_IMP_NETLOGIC_XLS616B: + case PRID_IMP_NETLOGIC_XLS608B: + case PRID_IMP_NETLOGIC_XLS416B: + case PRID_IMP_NETLOGIC_XLS412B: + case PRID_IMP_NETLOGIC_XLS408B: + case PRID_IMP_NETLOGIC_XLS404B: + c->cputype = CPU_XLR; + __cpu_name[cpu] = "Netlogic XLS"; + break; + + default: + printk(KERN_INFO "Unknown Netlogic chip id [%02x]!\n", + c->processor_id); + c->cputype = CPU_XLR; + break; + } + + c->isa_level = MIPS_CPU_ISA_M64R1; + c->tlbsize = ((read_c0_config1() >> 25) & 0x3f) + 1; +} + #ifdef CONFIG_64BIT /* For use by uaccess.h */ u64 __ua_limit; @@ -1035,6 +1107,9 @@ __cpuinit void cpu_probe(void) case PRID_COMP_INGENIC: cpu_probe_ingenic(c, cpu); break; + case PRID_COMP_NETLOGIC: + cpu_probe_netlogic(c, cpu); + break; } BUG_ON(!__cpu_name[cpu]); diff --git a/arch/mips/kernel/csrc-bcm1480.c b/arch/mips/kernel/csrc-bcm1480.c index 51489f8..f96f99c 100644 --- a/arch/mips/kernel/csrc-bcm1480.c +++ b/arch/mips/kernel/csrc-bcm1480.c @@ -49,6 +49,5 @@ void __init sb1480_clocksource_init(void) plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG))); zbbus = ((plldiv >> 1) * 50000000) + ((plldiv & 1) * 25000000); - clocksource_set_clock(cs, zbbus); - clocksource_register(cs); + clocksource_register_hz(cs, zbbus); } diff --git a/arch/mips/kernel/csrc-ioasic.c b/arch/mips/kernel/csrc-ioasic.c index 23da108..46bd7fa 100644 --- a/arch/mips/kernel/csrc-ioasic.c +++ b/arch/mips/kernel/csrc-ioasic.c @@ -59,7 +59,5 @@ void __init dec_ioasic_clocksource_init(void) printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq); clocksource_dec.rating = 200 + freq / 10000000; - clocksource_set_clock(&clocksource_dec, freq); - - clocksource_register(&clocksource_dec); + clocksource_register_hz(&clocksource_dec, freq); } diff --git a/arch/mips/kernel/csrc-powertv.c b/arch/mips/kernel/csrc-powertv.c index a27c16c..2e7c523 100644 --- a/arch/mips/kernel/csrc-powertv.c +++ b/arch/mips/kernel/csrc-powertv.c @@ -78,9 +78,7 @@ static void __init powertv_c0_hpt_clocksource_init(void) clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000; - clocksource_set_clock(&clocksource_mips, mips_hpt_frequency); - - clocksource_register(&clocksource_mips); + clocksource_register_hz(&clocksource_mips, mips_hpt_frequency); } /** @@ -130,43 +128,16 @@ static struct clocksource clocksource_tim_c = { /** * powertv_tim_c_clocksource_init - set up a clock source for the TIM_C clock * - * The hard part here is coming up with a constant k and shift s such that - * the 48-bit TIM_C value multiplied by k doesn't overflow and that value, - * when shifted right by s, yields the corresponding number of nanoseconds. * We know that TIM_C counts at 27 MHz/8, so each cycle corresponds to - * 1 / (27,000,000/8) seconds. Multiply that by a billion and you get the - * number of nanoseconds. Since the TIM_C value has 48 bits and the math is - * done in 64 bits, avoiding an overflow means that k must be less than - * 64 - 48 = 16 bits. + * 1 / (27,000,000/8) seconds. */ static void __init powertv_tim_c_clocksource_init(void) { - int prescale; - unsigned long dividend; - unsigned long k; - int s; - const int max_k_bits = (64 - 48) - 1; - const unsigned long billion = 1000000000; const unsigned long counts_per_second = 27000000 / 8; - prescale = BITS_PER_LONG - ilog2(billion) - 1; - dividend = billion << prescale; - k = dividend / counts_per_second; - s = ilog2(k) - max_k_bits; - - if (s < 0) - s = prescale; - - else { - k >>= s; - s += prescale; - } - - clocksource_tim_c.mult = k; - clocksource_tim_c.shift = s; clocksource_tim_c.rating = 200; - clocksource_register(&clocksource_tim_c); + clocksource_register_hz(&clocksource_tim_c, counts_per_second); tim_c = (struct tim_c *) asic_reg_addr(tim_ch); } diff --git a/arch/mips/kernel/csrc-r4k.c b/arch/mips/kernel/csrc-r4k.c index e95a3cd..decd1fa 100644 --- a/arch/mips/kernel/csrc-r4k.c +++ b/arch/mips/kernel/csrc-r4k.c @@ -30,9 +30,7 @@ int __init init_r4k_clocksource(void) /* Calculate a somewhat reasonable rating value */ clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000; - clocksource_set_clock(&clocksource_mips, mips_hpt_frequency); - - clocksource_register(&clocksource_mips); + clocksource_register_hz(&clocksource_mips, mips_hpt_frequency); return 0; } diff --git a/arch/mips/kernel/csrc-sb1250.c b/arch/mips/kernel/csrc-sb1250.c index d14d3d1..e9606d9 100644 --- a/arch/mips/kernel/csrc-sb1250.c +++ b/arch/mips/kernel/csrc-sb1250.c @@ -65,6 +65,5 @@ void __init sb1250_clocksource_init(void) IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CFG))); - clocksource_set_clock(cs, V_SCD_TIMER_FREQ); - clocksource_register(cs); + clocksource_register_hz(cs, V_SCD_TIMER_FREQ); } diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index ffa3310..37acfa0 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -167,14 +167,13 @@ work_notifysig: # deal with pending signals and FEXPORT(syscall_exit_work_partial) SAVE_STATIC syscall_exit_work: - li t0, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT + li t0, _TIF_WORK_SYSCALL_EXIT and t0, a2 # a2 is preloaded with TI_FLAGS beqz t0, work_pending # trace bit set? - local_irq_enable # could let do_syscall_trace() + local_irq_enable # could let syscall_trace_leave() # call schedule() instead move a0, sp - li a1, 1 - jal do_syscall_trace + jal syscall_trace_leave b resume_userspace #if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_MIPS_MT) diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c index 94ca2b0..feb8021 100644 --- a/arch/mips/kernel/ftrace.c +++ b/arch/mips/kernel/ftrace.c @@ -23,6 +23,7 @@ #define JAL 0x0c000000 /* jump & link: ip --> ra, jump to target */ #define ADDR_MASK 0x03ffffff /* op_code|addr : 31...26|25 ....0 */ +#define JUMP_RANGE_MASK ((1UL << 28) - 1) #define INSN_NOP 0x00000000 /* nop */ #define INSN_JAL(addr) \ @@ -44,12 +45,12 @@ static inline void ftrace_dyn_arch_init_insns(void) /* jal (ftrace_caller + 8), jump over the first two instruction */ buf = (u32 *)&insn_jal_ftrace_caller; - uasm_i_jal(&buf, (FTRACE_ADDR + 8)); + uasm_i_jal(&buf, (FTRACE_ADDR + 8) & JUMP_RANGE_MASK); #ifdef CONFIG_FUNCTION_GRAPH_TRACER /* j ftrace_graph_caller */ buf = (u32 *)&insn_j_ftrace_graph_caller; - uasm_i_j(&buf, (unsigned long)ftrace_graph_caller); + uasm_i_j(&buf, (unsigned long)ftrace_graph_caller & JUMP_RANGE_MASK); #endif } diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c index 2392a7a2..391221b 100644 --- a/arch/mips/kernel/i8253.c +++ b/arch/mips/kernel/i8253.c @@ -125,87 +125,11 @@ void __init setup_pit_timer(void) setup_irq(0, &irq0); } -/* - * Since the PIT overflows every tick, its not very useful - * to just read by itself. So use jiffies to emulate a free - * running counter: - */ -static cycle_t pit_read(struct clocksource *cs) -{ - unsigned long flags; - int count; - u32 jifs; - static int old_count; - static u32 old_jifs; - - raw_spin_lock_irqsave(&i8253_lock, flags); - /* - * Although our caller may have the read side of xtime_lock, - * this is now a seqlock, and we are cheating in this routine - * by having side effects on state that we cannot undo if - * there is a collision on the seqlock and our caller has to - * retry. (Namely, old_jifs and old_count.) So we must treat - * jiffies as volatile despite the lock. We read jiffies - * before latching the timer count to guarantee that although - * the jiffies value might be older than the count (that is, - * the counter may underflow between the last point where - * jiffies was incremented and the point where we latch the - * count), it cannot be newer. - */ - jifs = jiffies; - outb_p(0x00, PIT_MODE); /* latch the count ASAP */ - count = inb_p(PIT_CH0); /* read the latched count */ - count |= inb_p(PIT_CH0) << 8; - - /* VIA686a test code... reset the latch if count > max + 1 */ - if (count > LATCH) { - outb_p(0x34, PIT_MODE); - outb_p(LATCH & 0xff, PIT_CH0); - outb(LATCH >> 8, PIT_CH0); - count = LATCH - 1; - } - - /* - * It's possible for count to appear to go the wrong way for a - * couple of reasons: - * - * 1. The timer counter underflows, but we haven't handled the - * resulting interrupt and incremented jiffies yet. - * 2. Hardware problem with the timer, not giving us continuous time, - * the counter does small "jumps" upwards on some Pentium systems, - * (see c't 95/10 page 335 for Neptun bug.) - * - * Previous attempts to handle these cases intelligently were - * buggy, so we just do the simple thing now. - */ - if (count > old_count && jifs == old_jifs) { - count = old_count; - } - old_count = count; - old_jifs = jifs; - - raw_spin_unlock_irqrestore(&i8253_lock, flags); - - count = (LATCH - 1) - count; - - return (cycle_t)(jifs * LATCH) + count; -} - -static struct clocksource clocksource_pit = { - .name = "pit", - .rating = 110, - .read = pit_read, - .mask = CLOCKSOURCE_MASK(32), - .mult = 0, - .shift = 20, -}; - static int __init init_pit_clocksource(void) { if (num_possible_cpus() > 1) /* PIT does not scale! */ return 0; - clocksource_pit.mult = clocksource_hz2mult(CLOCK_TICK_RATE, 20); - return clocksource_register(&clocksource_pit); + return clocksource_i8253_init(); } arch_initcall(init_pit_clocksource); diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index d21c388..4e6ea1f 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -533,15 +533,10 @@ static inline int audit_arch(void) * Notification of system call entry/exit * - triggered by current->work.syscall_trace */ -asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit) +asmlinkage void syscall_trace_enter(struct pt_regs *regs) { /* do the secure computing check first */ - if (!entryexit) - secure_computing(regs->regs[2]); - - if (unlikely(current->audit_context) && entryexit) - audit_syscall_exit(AUDITSC_RESULT(regs->regs[2]), - regs->regs[2]); + secure_computing(regs->regs[2]); if (!(current->ptrace & PT_PTRACED)) goto out; @@ -565,8 +560,40 @@ asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit) } out: - if (unlikely(current->audit_context) && !entryexit) + if (unlikely(current->audit_context)) audit_syscall_entry(audit_arch(), regs->regs[2], regs->regs[4], regs->regs[5], regs->regs[6], regs->regs[7]); } + +/* + * Notification of system call entry/exit + * - triggered by current->work.syscall_trace + */ +asmlinkage void syscall_trace_leave(struct pt_regs *regs) +{ + if (unlikely(current->audit_context)) + audit_syscall_exit(AUDITSC_RESULT(regs->regs[7]), + -regs->regs[2]); + + if (!(current->ptrace & PT_PTRACED)) + return; + + if (!test_thread_flag(TIF_SYSCALL_TRACE)) + return; + + /* The 0x80 provides a way for the tracing parent to distinguish + between a syscall stop and SIGTRAP delivery */ + ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? + 0x80 : 0)); + + /* + * this isn't the same as continuing with a signal, but it will do + * for normal use. strace only continues with a signal if the + * stopping signal is not SIGTRAP. -brl + */ + if (current->exit_code) { + send_sig(current->exit_code, current, 1); + current->exit_code = 0; + } +} diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 7f5468b..7a8e1dd 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -88,8 +88,7 @@ syscall_trace_entry: SAVE_STATIC move s0, t2 move a0, sp - li a1, 0 - jal do_syscall_trace + jal syscall_trace_enter move t0, s0 RESTORE_STATIC @@ -565,7 +564,7 @@ einval: li v0, -ENOSYS sys sys_ioprio_get 2 /* 4315 */ sys sys_utimensat 4 sys sys_signalfd 3 - sys sys_ni_syscall 0 + sys sys_ni_syscall 0 /* was timerfd */ sys sys_eventfd 1 sys sys_fallocate 6 /* 4320 */ sys sys_timerfd_create 2 diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index a2e1fcb..2d31c83 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -91,8 +91,7 @@ syscall_trace_entry: SAVE_STATIC move s0, t2 move a0, sp - li a1, 0 - jal do_syscall_trace + jal syscall_trace_enter move t0, s0 RESTORE_STATIC @@ -404,7 +403,7 @@ sys_call_table: PTR sys_ioprio_get PTR sys_utimensat /* 5275 */ PTR sys_signalfd - PTR sys_ni_syscall + PTR sys_ni_syscall /* was timerfd */ PTR sys_eventfd PTR sys_fallocate PTR sys_timerfd_create /* 5280 */ diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index b2c7624..38a0503 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -89,8 +89,7 @@ n32_syscall_trace_entry: SAVE_STATIC move s0, t2 move a0, sp - li a1, 0 - jal do_syscall_trace + jal syscall_trace_enter move t0, s0 RESTORE_STATIC @@ -403,7 +402,7 @@ EXPORT(sysn32_call_table) PTR sys_ioprio_get PTR compat_sys_utimensat PTR compat_sys_signalfd /* 6280 */ - PTR sys_ni_syscall + PTR sys_ni_syscall /* was timerfd */ PTR sys_eventfd PTR sys_fallocate PTR sys_timerfd_create diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 049a9c8..91ea5e4 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -123,8 +123,7 @@ trace_a_syscall: move s0, t2 # Save syscall pointer move a0, sp - li a1, 0 - jal do_syscall_trace + jal syscall_trace_enter move t0, s0 RESTORE_STATIC @@ -522,7 +521,7 @@ sys_call_table: PTR sys_ioprio_get /* 4315 */ PTR compat_sys_utimensat PTR compat_sys_signalfd - PTR sys_ni_syscall + PTR sys_ni_syscall /* was timerfd */ PTR sys_eventfd PTR sys32_fallocate /* 4320 */ PTR sys_timerfd_create diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 5a88cc4..cedac46 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -929,7 +929,7 @@ static void post_direct_ipi(int cpu, struct smtc_ipi *pipi) static void ipi_resched_interrupt(void) { - /* Return from interrupt should be enough to cause scheduler check */ + scheduler_ipi(); } static void ipi_call_interrupt(void) diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c index 58beabf..d027657 100644 --- a/arch/mips/kernel/syscall.c +++ b/arch/mips/kernel/syscall.c @@ -10,12 +10,9 @@ #include <linux/capability.h> #include <linux/errno.h> #include <linux/linkage.h> -#include <linux/mm.h> #include <linux/fs.h> #include <linux/smp.h> -#include <linux/mman.h> #include <linux/ptrace.h> -#include <linux/sched.h> #include <linux/string.h> #include <linux/syscalls.h> #include <linux/file.h> @@ -25,11 +22,9 @@ #include <linux/msg.h> #include <linux/shm.h> #include <linux/compiler.h> -#include <linux/module.h> #include <linux/ipc.h> #include <linux/uaccess.h> #include <linux/slab.h> -#include <linux/random.h> #include <linux/elf.h> #include <asm/asm.h> @@ -66,121 +61,6 @@ out: return res; } -unsigned long shm_align_mask = PAGE_SIZE - 1; /* Sane caches */ - -EXPORT_SYMBOL(shm_align_mask); - -#define COLOUR_ALIGN(addr,pgoff) \ - ((((addr) + shm_align_mask) & ~shm_align_mask) + \ - (((pgoff) << PAGE_SHIFT) & shm_align_mask)) - -unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, - unsigned long len, unsigned long pgoff, unsigned long flags) -{ - struct vm_area_struct * vmm; - int do_color_align; - unsigned long task_size; - -#ifdef CONFIG_32BIT - task_size = TASK_SIZE; -#else /* Must be CONFIG_64BIT*/ - task_size = test_thread_flag(TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE; -#endif - - if (len > task_size) - return -ENOMEM; - - if (flags & MAP_FIXED) { - /* Even MAP_FIXED mappings must reside within task_size. */ - if (task_size - len < addr) - return -EINVAL; - - /* - * We do not accept a shared mapping if it would violate - * cache aliasing constraints. - */ - if ((flags & MAP_SHARED) && - ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask)) - return -EINVAL; - return addr; - } - - do_color_align = 0; - if (filp || (flags & MAP_SHARED)) - do_color_align = 1; - if (addr) { - if (do_color_align) - addr = COLOUR_ALIGN(addr, pgoff); - else - addr = PAGE_ALIGN(addr); - vmm = find_vma(current->mm, addr); - if (task_size - len >= addr && - (!vmm || addr + len <= vmm->vm_start)) - return addr; - } - addr = current->mm->mmap_base; - if (do_color_align) - addr = COLOUR_ALIGN(addr, pgoff); - else - addr = PAGE_ALIGN(addr); - - for (vmm = find_vma(current->mm, addr); ; vmm = vmm->vm_next) { - /* At this point: (!vmm || addr < vmm->vm_end). */ - if (task_size - len < addr) - return -ENOMEM; - if (!vmm || addr + len <= vmm->vm_start) - return addr; - addr = vmm->vm_end; - if (do_color_align) - addr = COLOUR_ALIGN(addr, pgoff); - } -} - -void arch_pick_mmap_layout(struct mm_struct *mm) -{ - unsigned long random_factor = 0UL; - - if (current->flags & PF_RANDOMIZE) { - random_factor = get_random_int(); - random_factor = random_factor << PAGE_SHIFT; - if (TASK_IS_32BIT_ADDR) - random_factor &= 0xfffffful; - else - random_factor &= 0xffffffful; - } - - mm->mmap_base = TASK_UNMAPPED_BASE + random_factor; - mm->get_unmapped_area = arch_get_unmapped_area; - mm->unmap_area = arch_unmap_area; -} - -static inline unsigned long brk_rnd(void) -{ - unsigned long rnd = get_random_int(); - - rnd = rnd << PAGE_SHIFT; - /* 8MB for 32bit, 256MB for 64bit */ - if (TASK_IS_32BIT_ADDR) - rnd = rnd & 0x7ffffful; - else - rnd = rnd & 0xffffffful; - - return rnd; -} - -unsigned long arch_randomize_brk(struct mm_struct *mm) -{ - unsigned long base = mm->brk; - unsigned long ret; - - ret = PAGE_ALIGN(base + brk_rnd()); - - if (ret < mm->brk) - return mm->brk; - - return ret; -} - SYSCALL_DEFINE6(mips_mmap, unsigned long, addr, unsigned long, len, unsigned long, prot, unsigned long, flags, unsigned long, fd, off_t, offset) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 71350f7..e9b3af2 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -374,7 +374,8 @@ void __noreturn die(const char *str, struct pt_regs *regs) unsigned long dvpret = dvpe(); #endif /* CONFIG_MIPS_MT_SMTC */ - notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV); + if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV) == NOTIFY_STOP) + sig = 0; console_verbose(); spin_lock_irq(&die_lock); @@ -383,9 +384,6 @@ void __noreturn die(const char *str, struct pt_regs *regs) mips_mt_regdump(dvpret); #endif /* CONFIG_MIPS_MT_SMTC */ - if (notify_die(DIE_OOPS, str, regs, 0, regs_to_trapnr(regs), SIGSEGV) == NOTIFY_STOP) - sig = 0; - printk("%s[#%d]:\n", str, ++die_counter); show_registers(regs); add_taint(TAINT_DIE); diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 832afbb..01af387 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -65,15 +65,18 @@ SECTIONS NOTES :text :note .dummy : { *(.dummy) } :text + _sdata = .; /* Start of data section */ RODATA /* writeable */ + _sdata = .; /* Start of data section */ .data : { /* Data */ . = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */ INIT_TASK_DATA(PAGE_SIZE) NOSAVE_DATA CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT) + READ_MOSTLY_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT) DATA_DATA CONSTRUCTORS } diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig new file mode 100644 index 0000000..3fccf21 --- /dev/null +++ b/arch/mips/lantiq/Kconfig @@ -0,0 +1,23 @@ +if LANTIQ + +config SOC_TYPE_XWAY + bool + default n + +choice + prompt "SoC Type" + default SOC_XWAY + +config SOC_AMAZON_SE + bool "Amazon SE" + select SOC_TYPE_XWAY + +config SOC_XWAY + bool "XWAY" + select SOC_TYPE_XWAY + select HW_HAS_PCI +endchoice + +source "arch/mips/lantiq/xway/Kconfig" + +endif diff --git a/arch/mips/lantiq/Makefile b/arch/mips/lantiq/Makefile new file mode 100644 index 0000000..e5dae0e --- /dev/null +++ b/arch/mips/lantiq/Makefile @@ -0,0 +1,11 @@ +# Copyright (C) 2010 John Crispin <blogic@openwrt.org> +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License version 2 as published +# by the Free Software Foundation. + +obj-y := irq.o setup.o clk.o prom.o devices.o + +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + +obj-$(CONFIG_SOC_TYPE_XWAY) += xway/ diff --git a/arch/mips/lantiq/Platform b/arch/mips/lantiq/Platform new file mode 100644 index 0000000..f3dff05 --- /dev/null +++ b/arch/mips/lantiq/Platform @@ -0,0 +1,8 @@ +# +# Lantiq +# + +platform-$(CONFIG_LANTIQ) += lantiq/ +cflags-$(CONFIG_LANTIQ) += -I$(srctree)/arch/mips/include/asm/mach-lantiq +load-$(CONFIG_LANTIQ) = 0xffffffff80002000 +cflags-$(CONFIG_SOC_TYPE_XWAY) += -I$(srctree)/arch/mips/include/asm/mach-lantiq/xway diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c new file mode 100644 index 0000000..9456089 --- /dev/null +++ b/arch/mips/lantiq/clk.c @@ -0,0 +1,140 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com> + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ +#include <linux/io.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/list.h> + +#include <asm/time.h> +#include <asm/irq.h> +#include <asm/div64.h> + +#include <lantiq_soc.h> + +#include "clk.h" + +struct clk { + const char *name; + unsigned long rate; + unsigned long (*get_rate) (void); +}; + +static struct clk *cpu_clk; +static int cpu_clk_cnt; + +/* lantiq socs have 3 static clocks */ +static struct clk cpu_clk_generic[] = { + { + .name = "cpu", + .get_rate = ltq_get_cpu_hz, + }, { + .name = "fpi", + .get_rate = ltq_get_fpi_hz, + }, { + .name = "io", + .get_rate = ltq_get_io_region_clock, + }, +}; + +static struct resource ltq_cgu_resource = { + .name = "cgu", + .start = LTQ_CGU_BASE_ADDR, + .end = LTQ_CGU_BASE_ADDR + LTQ_CGU_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +/* remapped clock register range */ +void __iomem *ltq_cgu_membase; + +void clk_init(void) +{ + cpu_clk = cpu_clk_generic; + cpu_clk_cnt = ARRAY_SIZE(cpu_clk_generic); +} + +static inline int clk_good(struct clk *clk) +{ + return clk && !IS_ERR(clk); +} + +unsigned long clk_get_rate(struct clk *clk) +{ + if (unlikely(!clk_good(clk))) + return 0; + + if (clk->rate != 0) + return clk->rate; + + if (clk->get_rate != NULL) + return clk->get_rate(); + + return 0; +} +EXPORT_SYMBOL(clk_get_rate); + +struct clk *clk_get(struct device *dev, const char *id) +{ + int i; + + for (i = 0; i < cpu_clk_cnt; i++) + if (!strcmp(id, cpu_clk[i].name)) + return &cpu_clk[i]; + BUG(); + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ + /* not used */ +} +EXPORT_SYMBOL(clk_put); + +static inline u32 ltq_get_counter_resolution(void) +{ + u32 res; + + __asm__ __volatile__( + ".set push\n" + ".set mips32r2\n" + "rdhwr %0, $3\n" + ".set pop\n" + : "=&r" (res) + : /* no input */ + : "memory"); + + return res; +} + +void __init plat_time_init(void) +{ + struct clk *clk; + + if (insert_resource(&iomem_resource, <q_cgu_resource) < 0) + panic("Failed to insert cgu memory\n"); + + if (request_mem_region(ltq_cgu_resource.start, + resource_size(<q_cgu_resource), "cgu") < 0) + panic("Failed to request cgu memory\n"); + + ltq_cgu_membase = ioremap_nocache(ltq_cgu_resource.start, + resource_size(<q_cgu_resource)); + if (!ltq_cgu_membase) { + pr_err("Failed to remap cgu memory\n"); + unreachable(); + } + clk = clk_get(0, "cpu"); + mips_hpt_frequency = clk_get_rate(clk) / ltq_get_counter_resolution(); + write_c0_compare(read_c0_count()); + clk_put(clk); +} diff --git a/arch/mips/lantiq/clk.h b/arch/mips/lantiq/clk.h new file mode 100644 index 0000000..3328925 --- /dev/null +++ b/arch/mips/lantiq/clk.h @@ -0,0 +1,18 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LTQ_CLK_H__ +#define _LTQ_CLK_H__ + +extern void clk_init(void); + +extern unsigned long ltq_get_cpu_hz(void); +extern unsigned long ltq_get_fpi_hz(void); +extern unsigned long ltq_get_io_region_clock(void); + +#endif diff --git a/arch/mips/lantiq/devices.c b/arch/mips/lantiq/devices.c new file mode 100644 index 0000000..7b82c34 --- /dev/null +++ b/arch/mips/lantiq/devices.c @@ -0,0 +1,122 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/reboot.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/etherdevice.h> +#include <linux/reboot.h> +#include <linux/time.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/leds.h> + +#include <asm/bootinfo.h> +#include <asm/irq.h> + +#include <lantiq_soc.h> + +#include "devices.h" + +/* nor flash */ +static struct resource ltq_nor_resource = { + .name = "nor", + .start = LTQ_FLASH_START, + .end = LTQ_FLASH_START + LTQ_FLASH_MAX - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ltq_nor = { + .name = "ltq_nor", + .resource = <q_nor_resource, + .num_resources = 1, +}; + +void __init ltq_register_nor(struct physmap_flash_data *data) +{ + ltq_nor.dev.platform_data = data; + platform_device_register(<q_nor); +} + +/* watchdog */ +static struct resource ltq_wdt_resource = { + .name = "watchdog", + .start = LTQ_WDT_BASE_ADDR, + .end = LTQ_WDT_BASE_ADDR + LTQ_WDT_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +void __init ltq_register_wdt(void) +{ + platform_device_register_simple("ltq_wdt", 0, <q_wdt_resource, 1); +} + +/* asc ports */ +static struct resource ltq_asc0_resources[] = { + { + .name = "asc0", + .start = LTQ_ASC0_BASE_ADDR, + .end = LTQ_ASC0_BASE_ADDR + LTQ_ASC_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + IRQ_RES(tx, LTQ_ASC_TIR(0)), + IRQ_RES(rx, LTQ_ASC_RIR(0)), + IRQ_RES(err, LTQ_ASC_EIR(0)), +}; + +static struct resource ltq_asc1_resources[] = { + { + .name = "asc1", + .start = LTQ_ASC1_BASE_ADDR, + .end = LTQ_ASC1_BASE_ADDR + LTQ_ASC_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + IRQ_RES(tx, LTQ_ASC_TIR(1)), + IRQ_RES(rx, LTQ_ASC_RIR(1)), + IRQ_RES(err, LTQ_ASC_EIR(1)), +}; + +void __init ltq_register_asc(int port) +{ + switch (port) { + case 0: + platform_device_register_simple("ltq_asc", 0, + ltq_asc0_resources, ARRAY_SIZE(ltq_asc0_resources)); + break; + case 1: + platform_device_register_simple("ltq_asc", 1, + ltq_asc1_resources, ARRAY_SIZE(ltq_asc1_resources)); + break; + default: + break; + } +} + +#ifdef CONFIG_PCI +/* pci */ +static struct platform_device ltq_pci = { + .name = "ltq_pci", + .num_resources = 0, +}; + +void __init ltq_register_pci(struct ltq_pci_data *data) +{ + ltq_pci.dev.platform_data = data; + platform_device_register(<q_pci); +} +#else +void __init ltq_register_pci(struct ltq_pci_data *data) +{ + pr_err("kernel is compiled without PCI support\n"); +} +#endif diff --git a/arch/mips/lantiq/devices.h b/arch/mips/lantiq/devices.h new file mode 100644 index 0000000..2947bb1 --- /dev/null +++ b/arch/mips/lantiq/devices.h @@ -0,0 +1,23 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LTQ_DEVICES_H__ +#define _LTQ_DEVICES_H__ + +#include <lantiq_platform.h> +#include <linux/mtd/physmap.h> + +#define IRQ_RES(resname, irq) \ + {.name = #resname, .start = (irq), .flags = IORESOURCE_IRQ} + +extern void ltq_register_nor(struct physmap_flash_data *data); +extern void ltq_register_wdt(void); +extern void ltq_register_asc(int port); +extern void ltq_register_pci(struct ltq_pci_data *data); + +#endif diff --git a/arch/mips/lantiq/early_printk.c b/arch/mips/lantiq/early_printk.c new file mode 100644 index 0000000..972e05f --- /dev/null +++ b/arch/mips/lantiq/early_printk.c @@ -0,0 +1,33 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/cpu.h> + +#include <lantiq.h> +#include <lantiq_soc.h> + +/* no ioremap possible at this early stage, lets use KSEG1 instead */ +#define LTQ_ASC_BASE KSEG1ADDR(LTQ_ASC1_BASE_ADDR) +#define ASC_BUF 1024 +#define LTQ_ASC_FSTAT ((u32 *)(LTQ_ASC_BASE + 0x0048)) +#define LTQ_ASC_TBUF ((u32 *)(LTQ_ASC_BASE + 0x0020)) +#define TXMASK 0x3F00 +#define TXOFFSET 8 + +void prom_putchar(char c) +{ + unsigned long flags; + + local_irq_save(flags); + do { } while ((ltq_r32(LTQ_ASC_FSTAT) & TXMASK) >> TXOFFSET); + if (c == '\n') + ltq_w32('\r', LTQ_ASC_TBUF); + ltq_w32(c, LTQ_ASC_TBUF); + local_irq_restore(flags); +} diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c new file mode 100644 index 0000000..fc89795 --- /dev/null +++ b/arch/mips/lantiq/irq.c @@ -0,0 +1,326 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + * Copyright (C) 2010 Thomas Langer <thomas.langer@lantiq.com> + */ + +#include <linux/interrupt.h> +#include <linux/ioport.h> + +#include <asm/bootinfo.h> +#include <asm/irq_cpu.h> + +#include <lantiq_soc.h> +#include <irq.h> + +/* register definitions */ +#define LTQ_ICU_IM0_ISR 0x0000 +#define LTQ_ICU_IM0_IER 0x0008 +#define LTQ_ICU_IM0_IOSR 0x0010 +#define LTQ_ICU_IM0_IRSR 0x0018 +#define LTQ_ICU_IM0_IMR 0x0020 +#define LTQ_ICU_IM1_ISR 0x0028 +#define LTQ_ICU_OFFSET (LTQ_ICU_IM1_ISR - LTQ_ICU_IM0_ISR) + +#define LTQ_EIU_EXIN_C 0x0000 +#define LTQ_EIU_EXIN_INIC 0x0004 +#define LTQ_EIU_EXIN_INEN 0x000C + +/* irq numbers used by the external interrupt unit (EIU) */ +#define LTQ_EIU_IR0 (INT_NUM_IM4_IRL0 + 30) +#define LTQ_EIU_IR1 (INT_NUM_IM3_IRL0 + 31) +#define LTQ_EIU_IR2 (INT_NUM_IM1_IRL0 + 26) +#define LTQ_EIU_IR3 INT_NUM_IM1_IRL0 +#define LTQ_EIU_IR4 (INT_NUM_IM1_IRL0 + 1) +#define LTQ_EIU_IR5 (INT_NUM_IM1_IRL0 + 2) +#define LTQ_EIU_IR6 (INT_NUM_IM2_IRL0 + 30) + +#define MAX_EIU 6 + +/* irqs generated by device attached to the EBU need to be acked in + * a special manner + */ +#define LTQ_ICU_EBU_IRQ 22 + +#define ltq_icu_w32(x, y) ltq_w32((x), ltq_icu_membase + (y)) +#define ltq_icu_r32(x) ltq_r32(ltq_icu_membase + (x)) + +#define ltq_eiu_w32(x, y) ltq_w32((x), ltq_eiu_membase + (y)) +#define ltq_eiu_r32(x) ltq_r32(ltq_eiu_membase + (x)) + +static unsigned short ltq_eiu_irq[MAX_EIU] = { + LTQ_EIU_IR0, + LTQ_EIU_IR1, + LTQ_EIU_IR2, + LTQ_EIU_IR3, + LTQ_EIU_IR4, + LTQ_EIU_IR5, +}; + +static struct resource ltq_icu_resource = { + .name = "icu", + .start = LTQ_ICU_BASE_ADDR, + .end = LTQ_ICU_BASE_ADDR + LTQ_ICU_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct resource ltq_eiu_resource = { + .name = "eiu", + .start = LTQ_EIU_BASE_ADDR, + .end = LTQ_EIU_BASE_ADDR + LTQ_ICU_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static void __iomem *ltq_icu_membase; +static void __iomem *ltq_eiu_membase; + +void ltq_disable_irq(struct irq_data *d) +{ + u32 ier = LTQ_ICU_IM0_IER; + int irq_nr = d->irq - INT_NUM_IRQ0; + + ier += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET); + irq_nr %= INT_NUM_IM_OFFSET; + ltq_icu_w32(ltq_icu_r32(ier) & ~(1 << irq_nr), ier); +} + +void ltq_mask_and_ack_irq(struct irq_data *d) +{ + u32 ier = LTQ_ICU_IM0_IER; + u32 isr = LTQ_ICU_IM0_ISR; + int irq_nr = d->irq - INT_NUM_IRQ0; + + ier += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET); + isr += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET); + irq_nr %= INT_NUM_IM_OFFSET; + ltq_icu_w32(ltq_icu_r32(ier) & ~(1 << irq_nr), ier); + ltq_icu_w32((1 << irq_nr), isr); +} + +static void ltq_ack_irq(struct irq_data *d) +{ + u32 isr = LTQ_ICU_IM0_ISR; + int irq_nr = d->irq - INT_NUM_IRQ0; + + isr += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET); + irq_nr %= INT_NUM_IM_OFFSET; + ltq_icu_w32((1 << irq_nr), isr); +} + +void ltq_enable_irq(struct irq_data *d) +{ + u32 ier = LTQ_ICU_IM0_IER; + int irq_nr = d->irq - INT_NUM_IRQ0; + + ier += LTQ_ICU_OFFSET * (irq_nr / INT_NUM_IM_OFFSET); + irq_nr %= INT_NUM_IM_OFFSET; + ltq_icu_w32(ltq_icu_r32(ier) | (1 << irq_nr), ier); +} + +static unsigned int ltq_startup_eiu_irq(struct irq_data *d) +{ + int i; + int irq_nr = d->irq - INT_NUM_IRQ0; + + ltq_enable_irq(d); + for (i = 0; i < MAX_EIU; i++) { + if (irq_nr == ltq_eiu_irq[i]) { + /* low level - we should really handle set_type */ + ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_C) | + (0x6 << (i * 4)), LTQ_EIU_EXIN_C); + /* clear all pending */ + ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INIC) & ~(1 << i), + LTQ_EIU_EXIN_INIC); + /* enable */ + ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) | (1 << i), + LTQ_EIU_EXIN_INEN); + break; + } + } + + return 0; +} + +static void ltq_shutdown_eiu_irq(struct irq_data *d) +{ + int i; + int irq_nr = d->irq - INT_NUM_IRQ0; + + ltq_disable_irq(d); + for (i = 0; i < MAX_EIU; i++) { + if (irq_nr == ltq_eiu_irq[i]) { + /* disable */ + ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_INEN) & ~(1 << i), + LTQ_EIU_EXIN_INEN); + break; + } + } +} + +static struct irq_chip ltq_irq_type = { + "icu", + .irq_enable = ltq_enable_irq, + .irq_disable = ltq_disable_irq, + .irq_unmask = ltq_enable_irq, + .irq_ack = ltq_ack_irq, + .irq_mask = ltq_disable_irq, + .irq_mask_ack = ltq_mask_and_ack_irq, +}; + +static struct irq_chip ltq_eiu_type = { + "eiu", + .irq_startup = ltq_startup_eiu_irq, + .irq_shutdown = ltq_shutdown_eiu_irq, + .irq_enable = ltq_enable_irq, + .irq_disable = ltq_disable_irq, + .irq_unmask = ltq_enable_irq, + .irq_ack = ltq_ack_irq, + .irq_mask = ltq_disable_irq, + .irq_mask_ack = ltq_mask_and_ack_irq, +}; + +static void ltq_hw_irqdispatch(int module) +{ + u32 irq; + + irq = ltq_icu_r32(LTQ_ICU_IM0_IOSR + (module * LTQ_ICU_OFFSET)); + if (irq == 0) + return; + + /* silicon bug causes only the msb set to 1 to be valid. all + * other bits might be bogus + */ + irq = __fls(irq); + do_IRQ((int)irq + INT_NUM_IM0_IRL0 + (INT_NUM_IM_OFFSET * module)); + + /* if this is a EBU irq, we need to ack it or get a deadlock */ + if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0)) + ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_ISTAT) | 0x10, + LTQ_EBU_PCC_ISTAT); +} + +#define DEFINE_HWx_IRQDISPATCH(x) \ + static void ltq_hw ## x ## _irqdispatch(void) \ + { \ + ltq_hw_irqdispatch(x); \ + } +DEFINE_HWx_IRQDISPATCH(0) +DEFINE_HWx_IRQDISPATCH(1) +DEFINE_HWx_IRQDISPATCH(2) +DEFINE_HWx_IRQDISPATCH(3) +DEFINE_HWx_IRQDISPATCH(4) + +static void ltq_hw5_irqdispatch(void) +{ + do_IRQ(MIPS_CPU_TIMER_IRQ); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; + unsigned int i; + + if (pending & CAUSEF_IP7) { + do_IRQ(MIPS_CPU_TIMER_IRQ); + goto out; + } else { + for (i = 0; i < 5; i++) { + if (pending & (CAUSEF_IP2 << i)) { + ltq_hw_irqdispatch(i); + goto out; + } + } + } + pr_alert("Spurious IRQ: CAUSE=0x%08x\n", read_c0_status()); + +out: + return; +} + +static struct irqaction cascade = { + .handler = no_action, + .flags = IRQF_DISABLED, + .name = "cascade", +}; + +void __init arch_init_irq(void) +{ + int i; + + if (insert_resource(&iomem_resource, <q_icu_resource) < 0) + panic("Failed to insert icu memory\n"); + + if (request_mem_region(ltq_icu_resource.start, + resource_size(<q_icu_resource), "icu") < 0) + panic("Failed to request icu memory\n"); + + ltq_icu_membase = ioremap_nocache(ltq_icu_resource.start, + resource_size(<q_icu_resource)); + if (!ltq_icu_membase) + panic("Failed to remap icu memory\n"); + + if (insert_resource(&iomem_resource, <q_eiu_resource) < 0) + panic("Failed to insert eiu memory\n"); + + if (request_mem_region(ltq_eiu_resource.start, + resource_size(<q_eiu_resource), "eiu") < 0) + panic("Failed to request eiu memory\n"); + + ltq_eiu_membase = ioremap_nocache(ltq_eiu_resource.start, + resource_size(<q_eiu_resource)); + if (!ltq_eiu_membase) + panic("Failed to remap eiu memory\n"); + + /* make sure all irqs are turned off by default */ + for (i = 0; i < 5; i++) + ltq_icu_w32(0, LTQ_ICU_IM0_IER + (i * LTQ_ICU_OFFSET)); + + /* clear all possibly pending interrupts */ + ltq_icu_w32(~0, LTQ_ICU_IM0_ISR + (i * LTQ_ICU_OFFSET)); + + mips_cpu_irq_init(); + + for (i = 2; i <= 6; i++) + setup_irq(i, &cascade); + + if (cpu_has_vint) { + pr_info("Setting up vectored interrupts\n"); + set_vi_handler(2, ltq_hw0_irqdispatch); + set_vi_handler(3, ltq_hw1_irqdispatch); + set_vi_handler(4, ltq_hw2_irqdispatch); + set_vi_handler(5, ltq_hw3_irqdispatch); + set_vi_handler(6, ltq_hw4_irqdispatch); + set_vi_handler(7, ltq_hw5_irqdispatch); + } + + for (i = INT_NUM_IRQ0; + i <= (INT_NUM_IRQ0 + (5 * INT_NUM_IM_OFFSET)); i++) + if ((i == LTQ_EIU_IR0) || (i == LTQ_EIU_IR1) || + (i == LTQ_EIU_IR2)) + irq_set_chip_and_handler(i, <q_eiu_type, + handle_level_irq); + /* EIU3-5 only exist on ar9 and vr9 */ + else if (((i == LTQ_EIU_IR3) || (i == LTQ_EIU_IR4) || + (i == LTQ_EIU_IR5)) && (ltq_is_ar9() || ltq_is_vr9())) + irq_set_chip_and_handler(i, <q_eiu_type, + handle_level_irq); + else + irq_set_chip_and_handler(i, <q_irq_type, + handle_level_irq); + +#if !defined(CONFIG_MIPS_MT_SMP) && !defined(CONFIG_MIPS_MT_SMTC) + set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | + IE_IRQ3 | IE_IRQ4 | IE_IRQ5); +#else + set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ0 | IE_IRQ1 | + IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5); +#endif +} + +unsigned int __cpuinit get_c0_compare_int(void) +{ + return CP0_LEGACY_COMPARE_IRQ; +} diff --git a/arch/mips/lantiq/machtypes.h b/arch/mips/lantiq/machtypes.h new file mode 100644 index 0000000..7e01b8c --- /dev/null +++ b/arch/mips/lantiq/machtypes.h @@ -0,0 +1,20 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LANTIQ_MACH_H__ +#define _LANTIQ_MACH_H__ + +#include <asm/mips_machine.h> + +enum lantiq_mach_type { + LTQ_MACH_GENERIC = 0, + LTQ_MACH_EASY50712, /* Danube evaluation board */ + LTQ_MACH_EASY50601, /* Amazon SE evaluation board */ +}; + +#endif diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c new file mode 100644 index 0000000..56ba007 --- /dev/null +++ b/arch/mips/lantiq/prom.c @@ -0,0 +1,71 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/module.h> +#include <linux/clk.h> +#include <asm/bootinfo.h> +#include <asm/time.h> + +#include <lantiq.h> + +#include "prom.h" +#include "clk.h" + +static struct ltq_soc_info soc_info; + +unsigned int ltq_get_cpu_ver(void) +{ + return soc_info.rev; +} +EXPORT_SYMBOL(ltq_get_cpu_ver); + +unsigned int ltq_get_soc_type(void) +{ + return soc_info.type; +} +EXPORT_SYMBOL(ltq_get_soc_type); + +const char *get_system_type(void) +{ + return soc_info.sys_type; +} + +void prom_free_prom_memory(void) +{ +} + +static void __init prom_init_cmdline(void) +{ + int argc = fw_arg0; + char **argv = (char **) KSEG1ADDR(fw_arg1); + int i; + + for (i = 0; i < argc; i++) { + char *p = (char *) KSEG1ADDR(argv[i]); + + if (p && *p) { + strlcat(arcs_cmdline, p, sizeof(arcs_cmdline)); + strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline)); + } + } +} + +void __init prom_init(void) +{ + struct clk *clk; + + ltq_soc_detect(&soc_info); + clk_init(); + clk = clk_get(0, "cpu"); + snprintf(soc_info.sys_type, LTQ_SYS_TYPE_LEN - 1, "%s rev1.%d", + soc_info.name, soc_info.rev); + clk_put(clk); + soc_info.sys_type[LTQ_SYS_TYPE_LEN - 1] = '\0'; + pr_info("SoC: %s\n", soc_info.sys_type); + prom_init_cmdline(); +} diff --git a/arch/mips/lantiq/prom.h b/arch/mips/lantiq/prom.h new file mode 100644 index 0000000..b4229d9 --- /dev/null +++ b/arch/mips/lantiq/prom.h @@ -0,0 +1,25 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LTQ_PROM_H__ +#define _LTQ_PROM_H__ + +#define LTQ_SYS_TYPE_LEN 0x100 + +struct ltq_soc_info { + unsigned char *name; + unsigned int rev; + unsigned int partnum; + unsigned int type; + unsigned char sys_type[LTQ_SYS_TYPE_LEN]; +}; + +extern void ltq_soc_detect(struct ltq_soc_info *i); +extern void ltq_soc_setup(void); + +#endif diff --git a/arch/mips/lantiq/setup.c b/arch/mips/lantiq/setup.c new file mode 100644 index 0000000..9b8af77 --- /dev/null +++ b/arch/mips/lantiq/setup.c @@ -0,0 +1,66 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <asm/bootinfo.h> + +#include <lantiq_soc.h> + +#include "machtypes.h" +#include "devices.h" +#include "prom.h" + +void __init plat_mem_setup(void) +{ + /* assume 16M as default incase uboot fails to pass proper ramsize */ + unsigned long memsize = 16; + char **envp = (char **) KSEG1ADDR(fw_arg2); + + ioport_resource.start = IOPORT_RESOURCE_START; + ioport_resource.end = IOPORT_RESOURCE_END; + iomem_resource.start = IOMEM_RESOURCE_START; + iomem_resource.end = IOMEM_RESOURCE_END; + + set_io_port_base((unsigned long) KSEG1); + + while (*envp) { + char *e = (char *)KSEG1ADDR(*envp); + if (!strncmp(e, "memsize=", 8)) { + e += 8; + if (strict_strtoul(e, 0, &memsize)) + pr_warn("bad memsize specified\n"); + } + envp++; + } + memsize *= 1024 * 1024; + add_memory_region(0x00000000, memsize, BOOT_MEM_RAM); +} + +static int __init +lantiq_setup(void) +{ + ltq_soc_setup(); + mips_machine_setup(); + return 0; +} + +arch_initcall(lantiq_setup); + +static void __init +lantiq_generic_init(void) +{ + /* Nothing to do */ +} + +MIPS_MACHINE(LTQ_MACH_GENERIC, + "Generic", + "Generic Lantiq based board", + lantiq_generic_init); diff --git a/arch/mips/lantiq/xway/Kconfig b/arch/mips/lantiq/xway/Kconfig new file mode 100644 index 0000000..2b857de --- /dev/null +++ b/arch/mips/lantiq/xway/Kconfig @@ -0,0 +1,23 @@ +if SOC_XWAY + +menu "MIPS Machine" + +config LANTIQ_MACH_EASY50712 + bool "Easy50712 - Danube" + default y + +endmenu + +endif + +if SOC_AMAZON_SE + +menu "MIPS Machine" + +config LANTIQ_MACH_EASY50601 + bool "Easy50601 - Amazon SE" + default y + +endmenu + +endif diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile new file mode 100644 index 0000000..c517f2e --- /dev/null +++ b/arch/mips/lantiq/xway/Makefile @@ -0,0 +1,7 @@ +obj-y := pmu.o ebu.o reset.o gpio.o gpio_stp.o gpio_ebu.o devices.o dma.o + +obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o setup-xway.o +obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o setup-ase.o + +obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o +obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o diff --git a/arch/mips/lantiq/xway/clk-ase.c b/arch/mips/lantiq/xway/clk-ase.c new file mode 100644 index 0000000..22d823a --- /dev/null +++ b/arch/mips/lantiq/xway/clk-ase.c @@ -0,0 +1,48 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/clk.h> + +#include <asm/time.h> +#include <asm/irq.h> +#include <asm/div64.h> + +#include <lantiq_soc.h> + +/* cgu registers */ +#define LTQ_CGU_SYS 0x0010 + +unsigned int ltq_get_io_region_clock(void) +{ + return CLOCK_133M; +} +EXPORT_SYMBOL(ltq_get_io_region_clock); + +unsigned int ltq_get_fpi_bus_clock(int fpi) +{ + return CLOCK_133M; +} +EXPORT_SYMBOL(ltq_get_fpi_bus_clock); + +unsigned int ltq_get_cpu_hz(void) +{ + if (ltq_cgu_r32(LTQ_CGU_SYS) & (1 << 5)) + return CLOCK_266M; + else + return CLOCK_133M; +} +EXPORT_SYMBOL(ltq_get_cpu_hz); + +unsigned int ltq_get_fpi_hz(void) +{ + return CLOCK_133M; +} +EXPORT_SYMBOL(ltq_get_fpi_hz); diff --git a/arch/mips/lantiq/xway/clk-xway.c b/arch/mips/lantiq/xway/clk-xway.c new file mode 100644 index 0000000..ddd3959 --- /dev/null +++ b/arch/mips/lantiq/xway/clk-xway.c @@ -0,0 +1,223 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/clk.h> + +#include <asm/time.h> +#include <asm/irq.h> +#include <asm/div64.h> + +#include <lantiq_soc.h> + +static unsigned int ltq_ram_clocks[] = { + CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M }; +#define DDR_HZ ltq_ram_clocks[ltq_cgu_r32(LTQ_CGU_SYS) & 0x3] + +#define BASIC_FREQUENCY_1 35328000 +#define BASIC_FREQUENCY_2 36000000 +#define BASIS_REQUENCY_USB 12000000 + +#define GET_BITS(x, msb, lsb) \ + (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb)) + +#define LTQ_CGU_PLL0_CFG 0x0004 +#define LTQ_CGU_PLL1_CFG 0x0008 +#define LTQ_CGU_PLL2_CFG 0x000C +#define LTQ_CGU_SYS 0x0010 +#define LTQ_CGU_UPDATE 0x0014 +#define LTQ_CGU_IF_CLK 0x0018 +#define LTQ_CGU_OSC_CON 0x001C +#define LTQ_CGU_SMD 0x0020 +#define LTQ_CGU_CT1SR 0x0028 +#define LTQ_CGU_CT2SR 0x002C +#define LTQ_CGU_PCMCR 0x0030 +#define LTQ_CGU_PCI_CR 0x0034 +#define LTQ_CGU_PD_PC 0x0038 +#define LTQ_CGU_FMR 0x003C + +#define CGU_PLL0_PHASE_DIVIDER_ENABLE \ + (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 31)) +#define CGU_PLL0_BYPASS \ + (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 30)) +#define CGU_PLL0_CFG_DSMSEL \ + (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 28)) +#define CGU_PLL0_CFG_FRAC_EN \ + (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 27)) +#define CGU_PLL1_SRC \ + (ltq_cgu_r32(LTQ_CGU_PLL1_CFG) & (1 << 31)) +#define CGU_PLL2_PHASE_DIVIDER_ENABLE \ + (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & (1 << 20)) +#define CGU_SYS_FPI_SEL (1 << 6) +#define CGU_SYS_DDR_SEL 0x3 +#define CGU_PLL0_SRC (1 << 29) + +#define CGU_PLL0_CFG_PLLK GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 26, 17) +#define CGU_PLL0_CFG_PLLN GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 12, 6) +#define CGU_PLL0_CFG_PLLM GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 5, 2) +#define CGU_PLL2_SRC GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 18, 17) +#define CGU_PLL2_CFG_INPUT_DIV GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 16, 13) + +static unsigned int ltq_get_pll0_fdiv(void); + +static inline unsigned int get_input_clock(int pll) +{ + switch (pll) { + case 0: + if (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & CGU_PLL0_SRC) + return BASIS_REQUENCY_USB; + else if (CGU_PLL0_PHASE_DIVIDER_ENABLE) + return BASIC_FREQUENCY_1; + else + return BASIC_FREQUENCY_2; + case 1: + if (CGU_PLL1_SRC) + return BASIS_REQUENCY_USB; + else if (CGU_PLL0_PHASE_DIVIDER_ENABLE) + return BASIC_FREQUENCY_1; + else + return BASIC_FREQUENCY_2; + case 2: + switch (CGU_PLL2_SRC) { + case 0: + return ltq_get_pll0_fdiv(); + case 1: + return CGU_PLL2_PHASE_DIVIDER_ENABLE ? + BASIC_FREQUENCY_1 : + BASIC_FREQUENCY_2; + case 2: + return BASIS_REQUENCY_USB; + } + default: + return 0; + } +} + +static inline unsigned int cal_dsm(int pll, unsigned int num, unsigned int den) +{ + u64 res, clock = get_input_clock(pll); + + res = num * clock; + do_div(res, den); + return res; +} + +static inline unsigned int mash_dsm(int pll, unsigned int M, unsigned int N, + unsigned int K) +{ + unsigned int num = ((N + 1) << 10) + K; + unsigned int den = (M + 1) << 10; + + return cal_dsm(pll, num, den); +} + +static inline unsigned int ssff_dsm_1(int pll, unsigned int M, unsigned int N, + unsigned int K) +{ + unsigned int num = ((N + 1) << 11) + K + 512; + unsigned int den = (M + 1) << 11; + + return cal_dsm(pll, num, den); +} + +static inline unsigned int ssff_dsm_2(int pll, unsigned int M, unsigned int N, + unsigned int K) +{ + unsigned int num = K >= 512 ? + ((N + 1) << 12) + K - 512 : ((N + 1) << 12) + K + 3584; + unsigned int den = (M + 1) << 12; + + return cal_dsm(pll, num, den); +} + +static inline unsigned int dsm(int pll, unsigned int M, unsigned int N, + unsigned int K, unsigned int dsmsel, unsigned int phase_div_en) +{ + if (!dsmsel) + return mash_dsm(pll, M, N, K); + else if (!phase_div_en) + return mash_dsm(pll, M, N, K); + else + return ssff_dsm_2(pll, M, N, K); +} + +static inline unsigned int ltq_get_pll0_fosc(void) +{ + if (CGU_PLL0_BYPASS) + return get_input_clock(0); + else + return !CGU_PLL0_CFG_FRAC_EN + ? dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, 0, + CGU_PLL0_CFG_DSMSEL, + CGU_PLL0_PHASE_DIVIDER_ENABLE) + : dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, + CGU_PLL0_CFG_PLLK, CGU_PLL0_CFG_DSMSEL, + CGU_PLL0_PHASE_DIVIDER_ENABLE); +} + +static unsigned int ltq_get_pll0_fdiv(void) +{ + unsigned int div = CGU_PLL2_CFG_INPUT_DIV + 1; + + return (ltq_get_pll0_fosc() + (div >> 1)) / div; +} + +unsigned int ltq_get_io_region_clock(void) +{ + unsigned int ret = ltq_get_pll0_fosc(); + + switch (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & CGU_SYS_DDR_SEL) { + default: + case 0: + return (ret + 1) / 2; + case 1: + return (ret * 2 + 2) / 5; + case 2: + return (ret + 1) / 3; + case 3: + return (ret + 2) / 4; + } +} +EXPORT_SYMBOL(ltq_get_io_region_clock); + +unsigned int ltq_get_fpi_bus_clock(int fpi) +{ + unsigned int ret = ltq_get_io_region_clock(); + + if ((fpi == 2) && (ltq_cgu_r32(LTQ_CGU_SYS) & CGU_SYS_FPI_SEL)) + ret >>= 1; + return ret; +} +EXPORT_SYMBOL(ltq_get_fpi_bus_clock); + +unsigned int ltq_get_cpu_hz(void) +{ + switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0xc) { + case 0: + return CLOCK_333M; + case 4: + return DDR_HZ; + case 8: + return DDR_HZ << 1; + default: + return DDR_HZ >> 1; + } +} +EXPORT_SYMBOL(ltq_get_cpu_hz); + +unsigned int ltq_get_fpi_hz(void) +{ + unsigned int ddr_clock = DDR_HZ; + + if (ltq_cgu_r32(LTQ_CGU_SYS) & 0x40) + return ddr_clock >> 1; + return ddr_clock; +} +EXPORT_SYMBOL(ltq_get_fpi_hz); diff --git a/arch/mips/lantiq/xway/devices.c b/arch/mips/lantiq/xway/devices.c new file mode 100644 index 0000000..e09e789 --- /dev/null +++ b/arch/mips/lantiq/xway/devices.c @@ -0,0 +1,121 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/string.h> +#include <linux/mtd/physmap.h> +#include <linux/kernel.h> +#include <linux/reboot.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/etherdevice.h> +#include <linux/reboot.h> +#include <linux/time.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/leds.h> + +#include <asm/bootinfo.h> +#include <asm/irq.h> + +#include <lantiq_soc.h> +#include <lantiq_irq.h> +#include <lantiq_platform.h> + +#include "devices.h" + +/* gpio */ +static struct resource ltq_gpio_resource[] = { + { + .name = "gpio0", + .start = LTQ_GPIO0_BASE_ADDR, + .end = LTQ_GPIO0_BASE_ADDR + LTQ_GPIO_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .name = "gpio1", + .start = LTQ_GPIO1_BASE_ADDR, + .end = LTQ_GPIO1_BASE_ADDR + LTQ_GPIO_SIZE - 1, + .flags = IORESOURCE_MEM, + }, { + .name = "gpio2", + .start = LTQ_GPIO2_BASE_ADDR, + .end = LTQ_GPIO2_BASE_ADDR + LTQ_GPIO_SIZE - 1, + .flags = IORESOURCE_MEM, + } +}; + +void __init ltq_register_gpio(void) +{ + platform_device_register_simple("ltq_gpio", 0, + <q_gpio_resource[0], 1); + platform_device_register_simple("ltq_gpio", 1, + <q_gpio_resource[1], 1); + + /* AR9 and VR9 have an extra gpio block */ + if (ltq_is_ar9() || ltq_is_vr9()) { + platform_device_register_simple("ltq_gpio", 2, + <q_gpio_resource[2], 1); + } +} + +/* serial to parallel conversion */ +static struct resource ltq_stp_resource = { + .name = "stp", + .start = LTQ_STP_BASE_ADDR, + .end = LTQ_STP_BASE_ADDR + LTQ_STP_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +void __init ltq_register_gpio_stp(void) +{ + platform_device_register_simple("ltq_stp", 0, <q_stp_resource, 1); +} + +/* asc ports - amazon se has its own serial mapping */ +static struct resource ltq_ase_asc_resources[] = { + { + .name = "asc0", + .start = LTQ_ASC1_BASE_ADDR, + .end = LTQ_ASC1_BASE_ADDR + LTQ_ASC_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + IRQ_RES(tx, LTQ_ASC_ASE_TIR), + IRQ_RES(rx, LTQ_ASC_ASE_RIR), + IRQ_RES(err, LTQ_ASC_ASE_EIR), +}; + +void __init ltq_register_ase_asc(void) +{ + platform_device_register_simple("ltq_asc", 0, + ltq_ase_asc_resources, ARRAY_SIZE(ltq_ase_asc_resources)); +} + +/* ethernet */ +static struct resource ltq_etop_resources = { + .name = "etop", + .start = LTQ_ETOP_BASE_ADDR, + .end = LTQ_ETOP_BASE_ADDR + LTQ_ETOP_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ltq_etop = { + .name = "ltq_etop", + .resource = <q_etop_resources, + .num_resources = 1, +}; + +void __init +ltq_register_etop(struct ltq_eth_data *eth) +{ + if (eth) { + ltq_etop.dev.platform_data = eth; + platform_device_register(<q_etop); + } +} diff --git a/arch/mips/lantiq/xway/devices.h b/arch/mips/lantiq/xway/devices.h new file mode 100644 index 0000000..e904934 --- /dev/null +++ b/arch/mips/lantiq/xway/devices.h @@ -0,0 +1,20 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LTQ_DEVICES_XWAY_H__ +#define _LTQ_DEVICES_XWAY_H__ + +#include "../devices.h" +#include <linux/phy.h> + +extern void ltq_register_gpio(void); +extern void ltq_register_gpio_stp(void); +extern void ltq_register_ase_asc(void); +extern void ltq_register_etop(struct ltq_eth_data *eth); + +#endif diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c new file mode 100644 index 0000000..4278a45 --- /dev/null +++ b/arch/mips/lantiq/xway/dma.c @@ -0,0 +1,253 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/dma-mapping.h> + +#include <lantiq_soc.h> +#include <xway_dma.h> + +#define LTQ_DMA_CTRL 0x10 +#define LTQ_DMA_CPOLL 0x14 +#define LTQ_DMA_CS 0x18 +#define LTQ_DMA_CCTRL 0x1C +#define LTQ_DMA_CDBA 0x20 +#define LTQ_DMA_CDLEN 0x24 +#define LTQ_DMA_CIS 0x28 +#define LTQ_DMA_CIE 0x2C +#define LTQ_DMA_PS 0x40 +#define LTQ_DMA_PCTRL 0x44 +#define LTQ_DMA_IRNEN 0xf4 + +#define DMA_DESCPT BIT(3) /* descriptor complete irq */ +#define DMA_TX BIT(8) /* TX channel direction */ +#define DMA_CHAN_ON BIT(0) /* channel on / off bit */ +#define DMA_PDEN BIT(6) /* enable packet drop */ +#define DMA_CHAN_RST BIT(1) /* channel on / off bit */ +#define DMA_RESET BIT(0) /* channel on / off bit */ +#define DMA_IRQ_ACK 0x7e /* IRQ status register */ +#define DMA_POLL BIT(31) /* turn on channel polling */ +#define DMA_CLK_DIV4 BIT(6) /* polling clock divider */ +#define DMA_2W_BURST BIT(1) /* 2 word burst length */ +#define DMA_MAX_CHANNEL 20 /* the soc has 20 channels */ +#define DMA_ETOP_ENDIANESS (0xf << 8) /* endianess swap etop channels */ +#define DMA_WEIGHT (BIT(17) | BIT(16)) /* default channel wheight */ + +#define ltq_dma_r32(x) ltq_r32(ltq_dma_membase + (x)) +#define ltq_dma_w32(x, y) ltq_w32(x, ltq_dma_membase + (y)) +#define ltq_dma_w32_mask(x, y, z) ltq_w32_mask(x, y, \ + ltq_dma_membase + (z)) + +static struct resource ltq_dma_resource = { + .name = "dma", + .start = LTQ_DMA_BASE_ADDR, + .end = LTQ_DMA_BASE_ADDR + LTQ_DMA_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static void __iomem *ltq_dma_membase; + +void +ltq_dma_enable_irq(struct ltq_dma_channel *ch) +{ + unsigned long flags; + + local_irq_save(flags); + ltq_dma_w32(ch->nr, LTQ_DMA_CS); + ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN); + local_irq_restore(flags); +} +EXPORT_SYMBOL_GPL(ltq_dma_enable_irq); + +void +ltq_dma_disable_irq(struct ltq_dma_channel *ch) +{ + unsigned long flags; + + local_irq_save(flags); + ltq_dma_w32(ch->nr, LTQ_DMA_CS); + ltq_dma_w32_mask(1 << ch->nr, 0, LTQ_DMA_IRNEN); + local_irq_restore(flags); +} +EXPORT_SYMBOL_GPL(ltq_dma_disable_irq); + +void +ltq_dma_ack_irq(struct ltq_dma_channel *ch) +{ + unsigned long flags; + + local_irq_save(flags); + ltq_dma_w32(ch->nr, LTQ_DMA_CS); + ltq_dma_w32(DMA_IRQ_ACK, LTQ_DMA_CIS); + local_irq_restore(flags); +} +EXPORT_SYMBOL_GPL(ltq_dma_ack_irq); + +void +ltq_dma_open(struct ltq_dma_channel *ch) +{ + unsigned long flag; + + local_irq_save(flag); + ltq_dma_w32(ch->nr, LTQ_DMA_CS); + ltq_dma_w32_mask(0, DMA_CHAN_ON, LTQ_DMA_CCTRL); + ltq_dma_enable_irq(ch); + local_irq_restore(flag); +} +EXPORT_SYMBOL_GPL(ltq_dma_open); + +void +ltq_dma_close(struct ltq_dma_channel *ch) +{ + unsigned long flag; + + local_irq_save(flag); + ltq_dma_w32(ch->nr, LTQ_DMA_CS); + ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL); + ltq_dma_disable_irq(ch); + local_irq_restore(flag); +} +EXPORT_SYMBOL_GPL(ltq_dma_close); + +static void +ltq_dma_alloc(struct ltq_dma_channel *ch) +{ + unsigned long flags; + + ch->desc = 0; + ch->desc_base = dma_alloc_coherent(NULL, + LTQ_DESC_NUM * LTQ_DESC_SIZE, + &ch->phys, GFP_ATOMIC); + memset(ch->desc_base, 0, LTQ_DESC_NUM * LTQ_DESC_SIZE); + + local_irq_save(flags); + ltq_dma_w32(ch->nr, LTQ_DMA_CS); + ltq_dma_w32(ch->phys, LTQ_DMA_CDBA); + ltq_dma_w32(LTQ_DESC_NUM, LTQ_DMA_CDLEN); + ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL); + wmb(); + ltq_dma_w32_mask(0, DMA_CHAN_RST, LTQ_DMA_CCTRL); + while (ltq_dma_r32(LTQ_DMA_CCTRL) & DMA_CHAN_RST) + ; + local_irq_restore(flags); +} + +void +ltq_dma_alloc_tx(struct ltq_dma_channel *ch) +{ + unsigned long flags; + + ltq_dma_alloc(ch); + + local_irq_save(flags); + ltq_dma_w32(DMA_DESCPT, LTQ_DMA_CIE); + ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN); + ltq_dma_w32(DMA_WEIGHT | DMA_TX, LTQ_DMA_CCTRL); + local_irq_restore(flags); +} +EXPORT_SYMBOL_GPL(ltq_dma_alloc_tx); + +void +ltq_dma_alloc_rx(struct ltq_dma_channel *ch) +{ + unsigned long flags; + + ltq_dma_alloc(ch); + + local_irq_save(flags); + ltq_dma_w32(DMA_DESCPT, LTQ_DMA_CIE); + ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN); + ltq_dma_w32(DMA_WEIGHT, LTQ_DMA_CCTRL); + local_irq_restore(flags); +} +EXPORT_SYMBOL_GPL(ltq_dma_alloc_rx); + +void +ltq_dma_free(struct ltq_dma_channel *ch) +{ + if (!ch->desc_base) + return; + ltq_dma_close(ch); + dma_free_coherent(NULL, LTQ_DESC_NUM * LTQ_DESC_SIZE, + ch->desc_base, ch->phys); +} +EXPORT_SYMBOL_GPL(ltq_dma_free); + +void +ltq_dma_init_port(int p) +{ + ltq_dma_w32(p, LTQ_DMA_PS); + switch (p) { + case DMA_PORT_ETOP: + /* + * Tell the DMA engine to swap the endianess of data frames and + * drop packets if the channel arbitration fails. + */ + ltq_dma_w32_mask(0, DMA_ETOP_ENDIANESS | DMA_PDEN, + LTQ_DMA_PCTRL); + break; + + case DMA_PORT_DEU: + ltq_dma_w32((DMA_2W_BURST << 4) | (DMA_2W_BURST << 2), + LTQ_DMA_PCTRL); + break; + + default: + break; + } +} +EXPORT_SYMBOL_GPL(ltq_dma_init_port); + +int __init +ltq_dma_init(void) +{ + int i; + + /* insert and request the memory region */ + if (insert_resource(&iomem_resource, <q_dma_resource) < 0) + panic("Failed to insert dma memory\n"); + + if (request_mem_region(ltq_dma_resource.start, + resource_size(<q_dma_resource), "dma") < 0) + panic("Failed to request dma memory\n"); + + /* remap dma register range */ + ltq_dma_membase = ioremap_nocache(ltq_dma_resource.start, + resource_size(<q_dma_resource)); + if (!ltq_dma_membase) + panic("Failed to remap dma memory\n"); + + /* power up and reset the dma engine */ + ltq_pmu_enable(PMU_DMA); + ltq_dma_w32_mask(0, DMA_RESET, LTQ_DMA_CTRL); + + /* disable all interrupts */ + ltq_dma_w32(0, LTQ_DMA_IRNEN); + + /* reset/configure each channel */ + for (i = 0; i < DMA_MAX_CHANNEL; i++) { + ltq_dma_w32(i, LTQ_DMA_CS); + ltq_dma_w32(DMA_CHAN_RST, LTQ_DMA_CCTRL); + ltq_dma_w32(DMA_POLL | DMA_CLK_DIV4, LTQ_DMA_CPOLL); + ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL); + } + return 0; +} + +postcore_initcall(ltq_dma_init); diff --git a/arch/mips/lantiq/xway/ebu.c b/arch/mips/lantiq/xway/ebu.c new file mode 100644 index 0000000..66eb52f --- /dev/null +++ b/arch/mips/lantiq/xway/ebu.c @@ -0,0 +1,53 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * EBU - the external bus unit attaches PCI, NOR and NAND + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/version.h> +#include <linux/ioport.h> + +#include <lantiq_soc.h> + +/* all access to the ebu must be locked */ +DEFINE_SPINLOCK(ebu_lock); +EXPORT_SYMBOL_GPL(ebu_lock); + +static struct resource ltq_ebu_resource = { + .name = "ebu", + .start = LTQ_EBU_BASE_ADDR, + .end = LTQ_EBU_BASE_ADDR + LTQ_EBU_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +/* remapped base addr of the clock unit and external bus unit */ +void __iomem *ltq_ebu_membase; + +static int __init lantiq_ebu_init(void) +{ + /* insert and request the memory region */ + if (insert_resource(&iomem_resource, <q_ebu_resource) < 0) + panic("Failed to insert ebu memory\n"); + + if (request_mem_region(ltq_ebu_resource.start, + resource_size(<q_ebu_resource), "ebu") < 0) + panic("Failed to request ebu memory\n"); + + /* remap ebu register range */ + ltq_ebu_membase = ioremap_nocache(ltq_ebu_resource.start, + resource_size(<q_ebu_resource)); + if (!ltq_ebu_membase) + panic("Failed to remap ebu memory\n"); + + /* make sure to unprotect the memory region where flash is located */ + ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0); + return 0; +} + +postcore_initcall(lantiq_ebu_init); diff --git a/arch/mips/lantiq/xway/gpio.c b/arch/mips/lantiq/xway/gpio.c new file mode 100644 index 0000000..a321451 --- /dev/null +++ b/arch/mips/lantiq/xway/gpio.c @@ -0,0 +1,195 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/ioport.h> +#include <linux/io.h> + +#include <lantiq_soc.h> + +#define LTQ_GPIO_OUT 0x00 +#define LTQ_GPIO_IN 0x04 +#define LTQ_GPIO_DIR 0x08 +#define LTQ_GPIO_ALTSEL0 0x0C +#define LTQ_GPIO_ALTSEL1 0x10 +#define LTQ_GPIO_OD 0x14 + +#define PINS_PER_PORT 16 +#define MAX_PORTS 3 + +#define ltq_gpio_getbit(m, r, p) (!!(ltq_r32(m + r) & (1 << p))) +#define ltq_gpio_setbit(m, r, p) ltq_w32_mask(0, (1 << p), m + r) +#define ltq_gpio_clearbit(m, r, p) ltq_w32_mask((1 << p), 0, m + r) + +struct ltq_gpio { + void __iomem *membase; + struct gpio_chip chip; +}; + +static struct ltq_gpio ltq_gpio_port[MAX_PORTS]; + +int gpio_to_irq(unsigned int gpio) +{ + return -EINVAL; +} +EXPORT_SYMBOL(gpio_to_irq); + +int irq_to_gpio(unsigned int gpio) +{ + return -EINVAL; +} +EXPORT_SYMBOL(irq_to_gpio); + +int ltq_gpio_request(unsigned int pin, unsigned int alt0, + unsigned int alt1, unsigned int dir, const char *name) +{ + int id = 0; + + if (pin >= (MAX_PORTS * PINS_PER_PORT)) + return -EINVAL; + if (gpio_request(pin, name)) { + pr_err("failed to setup lantiq gpio: %s\n", name); + return -EBUSY; + } + if (dir) + gpio_direction_output(pin, 1); + else + gpio_direction_input(pin); + while (pin >= PINS_PER_PORT) { + pin -= PINS_PER_PORT; + id++; + } + if (alt0) + ltq_gpio_setbit(ltq_gpio_port[id].membase, + LTQ_GPIO_ALTSEL0, pin); + else + ltq_gpio_clearbit(ltq_gpio_port[id].membase, + LTQ_GPIO_ALTSEL0, pin); + if (alt1) + ltq_gpio_setbit(ltq_gpio_port[id].membase, + LTQ_GPIO_ALTSEL1, pin); + else + ltq_gpio_clearbit(ltq_gpio_port[id].membase, + LTQ_GPIO_ALTSEL1, pin); + return 0; +} +EXPORT_SYMBOL(ltq_gpio_request); + +static void ltq_gpio_set(struct gpio_chip *chip, unsigned int offset, int value) +{ + struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip); + + if (value) + ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OUT, offset); + else + ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OUT, offset); +} + +static int ltq_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip); + + return ltq_gpio_getbit(ltq_gpio->membase, LTQ_GPIO_IN, offset); +} + +static int ltq_gpio_direction_input(struct gpio_chip *chip, unsigned int offset) +{ + struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip); + + ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OD, offset); + ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset); + + return 0; +} + +static int ltq_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip); + + ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OD, offset); + ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset); + ltq_gpio_set(chip, offset, value); + + return 0; +} + +static int ltq_gpio_req(struct gpio_chip *chip, unsigned offset) +{ + struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip); + + ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL0, offset); + ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL1, offset); + return 0; +} + +static int ltq_gpio_probe(struct platform_device *pdev) +{ + struct resource *res; + + if (pdev->id >= MAX_PORTS) { + dev_err(&pdev->dev, "invalid gpio port %d\n", + pdev->id); + return -EINVAL; + } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "failed to get memory for gpio port %d\n", + pdev->id); + return -ENOENT; + } + res = devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), dev_name(&pdev->dev)); + if (!res) { + dev_err(&pdev->dev, + "failed to request memory for gpio port %d\n", + pdev->id); + return -EBUSY; + } + ltq_gpio_port[pdev->id].membase = devm_ioremap_nocache(&pdev->dev, + res->start, resource_size(res)); + if (!ltq_gpio_port[pdev->id].membase) { + dev_err(&pdev->dev, "failed to remap memory for gpio port %d\n", + pdev->id); + return -ENOMEM; + } + ltq_gpio_port[pdev->id].chip.label = "ltq_gpio"; + ltq_gpio_port[pdev->id].chip.direction_input = ltq_gpio_direction_input; + ltq_gpio_port[pdev->id].chip.direction_output = + ltq_gpio_direction_output; + ltq_gpio_port[pdev->id].chip.get = ltq_gpio_get; + ltq_gpio_port[pdev->id].chip.set = ltq_gpio_set; + ltq_gpio_port[pdev->id].chip.request = ltq_gpio_req; + ltq_gpio_port[pdev->id].chip.base = PINS_PER_PORT * pdev->id; + ltq_gpio_port[pdev->id].chip.ngpio = PINS_PER_PORT; + platform_set_drvdata(pdev, <q_gpio_port[pdev->id]); + return gpiochip_add(<q_gpio_port[pdev->id].chip); +} + +static struct platform_driver +ltq_gpio_driver = { + .probe = ltq_gpio_probe, + .driver = { + .name = "ltq_gpio", + .owner = THIS_MODULE, + }, +}; + +int __init ltq_gpio_init(void) +{ + int ret = platform_driver_register(<q_gpio_driver); + + if (ret) + pr_info("ltq_gpio : Error registering platfom driver!"); + return ret; +} + +postcore_initcall(ltq_gpio_init); diff --git a/arch/mips/lantiq/xway/gpio_ebu.c b/arch/mips/lantiq/xway/gpio_ebu.c new file mode 100644 index 0000000..a479355 --- /dev/null +++ b/arch/mips/lantiq/xway/gpio_ebu.c @@ -0,0 +1,126 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/gpio.h> +#include <linux/io.h> + +#include <lantiq_soc.h> + +/* + * By attaching hardware latches to the EBU it is possible to create output + * only gpios. This driver configures a special memory address, which when + * written to outputs 16 bit to the latches. + */ + +#define LTQ_EBU_BUSCON 0x1e7ff /* 16 bit access, slowest timing */ +#define LTQ_EBU_WP 0x80000000 /* write protect bit */ + +/* we keep a shadow value of the last value written to the ebu */ +static int ltq_ebu_gpio_shadow = 0x0; +static void __iomem *ltq_ebu_gpio_membase; + +static void ltq_ebu_apply(void) +{ + unsigned long flags; + + spin_lock_irqsave(&ebu_lock, flags); + ltq_ebu_w32(LTQ_EBU_BUSCON, LTQ_EBU_BUSCON1); + *((__u16 *)ltq_ebu_gpio_membase) = ltq_ebu_gpio_shadow; + ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1); + spin_unlock_irqrestore(&ebu_lock, flags); +} + +static void ltq_ebu_set(struct gpio_chip *chip, unsigned offset, int value) +{ + if (value) + ltq_ebu_gpio_shadow |= (1 << offset); + else + ltq_ebu_gpio_shadow &= ~(1 << offset); + ltq_ebu_apply(); +} + +static int ltq_ebu_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + ltq_ebu_set(chip, offset, value); + + return 0; +} + +static struct gpio_chip ltq_ebu_chip = { + .label = "ltq_ebu", + .direction_output = ltq_ebu_direction_output, + .set = ltq_ebu_set, + .base = 72, + .ngpio = 16, + .can_sleep = 1, + .owner = THIS_MODULE, +}; + +static int ltq_ebu_probe(struct platform_device *pdev) +{ + int ret = 0; + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + if (!res) { + dev_err(&pdev->dev, "failed to get memory resource\n"); + return -ENOENT; + } + + res = devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), dev_name(&pdev->dev)); + if (!res) { + dev_err(&pdev->dev, "failed to request memory resource\n"); + return -EBUSY; + } + + ltq_ebu_gpio_membase = devm_ioremap_nocache(&pdev->dev, res->start, + resource_size(res)); + if (!ltq_ebu_gpio_membase) { + dev_err(&pdev->dev, "Failed to ioremap mem region\n"); + return -ENOMEM; + } + + /* grab the default shadow value passed form the platform code */ + ltq_ebu_gpio_shadow = (unsigned int) pdev->dev.platform_data; + + /* tell the ebu controller which memory address we will be using */ + ltq_ebu_w32(pdev->resource->start | 0x1, LTQ_EBU_ADDRSEL1); + + /* write protect the region */ + ltq_ebu_w32(LTQ_EBU_BUSCON | LTQ_EBU_WP, LTQ_EBU_BUSCON1); + + ret = gpiochip_add(<q_ebu_chip); + if (!ret) + ltq_ebu_apply(); + return ret; +} + +static struct platform_driver ltq_ebu_driver = { + .probe = ltq_ebu_probe, + .driver = { + .name = "ltq_ebu", + .owner = THIS_MODULE, + }, +}; + +static int __init ltq_ebu_init(void) +{ + int ret = platform_driver_register(<q_ebu_driver); + + if (ret) + pr_info("ltq_ebu : Error registering platfom driver!"); + return ret; +} + +postcore_initcall(ltq_ebu_init); diff --git a/arch/mips/lantiq/xway/gpio_stp.c b/arch/mips/lantiq/xway/gpio_stp.c new file mode 100644 index 0000000..67d59d6 --- /dev/null +++ b/arch/mips/lantiq/xway/gpio_stp.c @@ -0,0 +1,157 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2007 John Crispin <blogic@openwrt.org> + * + */ + +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <lantiq_soc.h> + +#define LTQ_STP_CON0 0x00 +#define LTQ_STP_CON1 0x04 +#define LTQ_STP_CPU0 0x08 +#define LTQ_STP_CPU1 0x0C +#define LTQ_STP_AR 0x10 + +#define LTQ_STP_CON_SWU (1 << 31) +#define LTQ_STP_2HZ 0 +#define LTQ_STP_4HZ (1 << 23) +#define LTQ_STP_8HZ (2 << 23) +#define LTQ_STP_10HZ (3 << 23) +#define LTQ_STP_SPEED_MASK (0xf << 23) +#define LTQ_STP_UPD_FPI (1 << 31) +#define LTQ_STP_UPD_MASK (3 << 30) +#define LTQ_STP_ADSL_SRC (3 << 24) + +#define LTQ_STP_GROUP0 (1 << 0) + +#define LTQ_STP_RISING 0 +#define LTQ_STP_FALLING (1 << 26) +#define LTQ_STP_EDGE_MASK (1 << 26) + +#define ltq_stp_r32(reg) __raw_readl(ltq_stp_membase + reg) +#define ltq_stp_w32(val, reg) __raw_writel(val, ltq_stp_membase + reg) +#define ltq_stp_w32_mask(clear, set, reg) \ + ltq_w32((ltq_r32(ltq_stp_membase + reg) & ~(clear)) | (set), \ + ltq_stp_membase + (reg)) + +static int ltq_stp_shadow = 0xffff; +static void __iomem *ltq_stp_membase; + +static void ltq_stp_set(struct gpio_chip *chip, unsigned offset, int value) +{ + if (value) + ltq_stp_shadow |= (1 << offset); + else + ltq_stp_shadow &= ~(1 << offset); + ltq_stp_w32(ltq_stp_shadow, LTQ_STP_CPU0); +} + +static int ltq_stp_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + ltq_stp_set(chip, offset, value); + + return 0; +} + +static struct gpio_chip ltq_stp_chip = { + .label = "ltq_stp", + .direction_output = ltq_stp_direction_output, + .set = ltq_stp_set, + .base = 48, + .ngpio = 24, + .can_sleep = 1, + .owner = THIS_MODULE, +}; + +static int ltq_stp_hw_init(void) +{ + /* the 3 pins used to control the external stp */ + ltq_gpio_request(4, 1, 0, 1, "stp-st"); + ltq_gpio_request(5, 1, 0, 1, "stp-d"); + ltq_gpio_request(6, 1, 0, 1, "stp-sh"); + + /* sane defaults */ + ltq_stp_w32(0, LTQ_STP_AR); + ltq_stp_w32(0, LTQ_STP_CPU0); + ltq_stp_w32(0, LTQ_STP_CPU1); + ltq_stp_w32(LTQ_STP_CON_SWU, LTQ_STP_CON0); + ltq_stp_w32(0, LTQ_STP_CON1); + + /* rising or falling edge */ + ltq_stp_w32_mask(LTQ_STP_EDGE_MASK, LTQ_STP_FALLING, LTQ_STP_CON0); + + /* per default stp 15-0 are set */ + ltq_stp_w32_mask(0, LTQ_STP_GROUP0, LTQ_STP_CON1); + + /* stp are update periodically by the FPI bus */ + ltq_stp_w32_mask(LTQ_STP_UPD_MASK, LTQ_STP_UPD_FPI, LTQ_STP_CON1); + + /* set stp update speed */ + ltq_stp_w32_mask(LTQ_STP_SPEED_MASK, LTQ_STP_8HZ, LTQ_STP_CON1); + + /* tell the hardware that pin (led) 0 and 1 are controlled + * by the dsl arc + */ + ltq_stp_w32_mask(0, LTQ_STP_ADSL_SRC, LTQ_STP_CON0); + + ltq_pmu_enable(PMU_LED); + return 0; +} + +static int __devinit ltq_stp_probe(struct platform_device *pdev) +{ + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + int ret = 0; + + if (!res) + return -ENOENT; + res = devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), dev_name(&pdev->dev)); + if (!res) { + dev_err(&pdev->dev, "failed to request STP memory\n"); + return -EBUSY; + } + ltq_stp_membase = devm_ioremap_nocache(&pdev->dev, res->start, + resource_size(res)); + if (!ltq_stp_membase) { + dev_err(&pdev->dev, "failed to remap STP memory\n"); + return -ENOMEM; + } + ret = gpiochip_add(<q_stp_chip); + if (!ret) + ret = ltq_stp_hw_init(); + + return ret; +} + +static struct platform_driver ltq_stp_driver = { + .probe = ltq_stp_probe, + .driver = { + .name = "ltq_stp", + .owner = THIS_MODULE, + }, +}; + +int __init ltq_stp_init(void) +{ + int ret = platform_driver_register(<q_stp_driver); + + if (ret) + pr_info("ltq_stp: error registering platfom driver"); + return ret; +} + +postcore_initcall(ltq_stp_init); diff --git a/arch/mips/lantiq/xway/mach-easy50601.c b/arch/mips/lantiq/xway/mach-easy50601.c new file mode 100644 index 0000000..d5aaf63 --- /dev/null +++ b/arch/mips/lantiq/xway/mach-easy50601.c @@ -0,0 +1,57 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/input.h> + +#include <lantiq.h> + +#include "../machtypes.h" +#include "devices.h" + +static struct mtd_partition easy50601_partitions[] = { + { + .name = "uboot", + .offset = 0x0, + .size = 0x10000, + }, + { + .name = "uboot_env", + .offset = 0x10000, + .size = 0x10000, + }, + { + .name = "linux", + .offset = 0x20000, + .size = 0xE0000, + }, + { + .name = "rootfs", + .offset = 0x100000, + .size = 0x300000, + }, +}; + +static struct physmap_flash_data easy50601_flash_data = { + .nr_parts = ARRAY_SIZE(easy50601_partitions), + .parts = easy50601_partitions, +}; + +static void __init easy50601_init(void) +{ + ltq_register_nor(&easy50601_flash_data); +} + +MIPS_MACHINE(LTQ_MACH_EASY50601, + "EASY50601", + "EASY50601 Eval Board", + easy50601_init); diff --git a/arch/mips/lantiq/xway/mach-easy50712.c b/arch/mips/lantiq/xway/mach-easy50712.c new file mode 100644 index 0000000..ea5027b --- /dev/null +++ b/arch/mips/lantiq/xway/mach-easy50712.c @@ -0,0 +1,74 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/input.h> +#include <linux/phy.h> + +#include <lantiq_soc.h> +#include <irq.h> + +#include "../machtypes.h" +#include "devices.h" + +static struct mtd_partition easy50712_partitions[] = { + { + .name = "uboot", + .offset = 0x0, + .size = 0x10000, + }, + { + .name = "uboot_env", + .offset = 0x10000, + .size = 0x10000, + }, + { + .name = "linux", + .offset = 0x20000, + .size = 0xe0000, + }, + { + .name = "rootfs", + .offset = 0x100000, + .size = 0x300000, + }, +}; + +static struct physmap_flash_data easy50712_flash_data = { + .nr_parts = ARRAY_SIZE(easy50712_partitions), + .parts = easy50712_partitions, +}; + +static struct ltq_pci_data ltq_pci_data = { + .clock = PCI_CLOCK_INT, + .gpio = PCI_GNT1 | PCI_REQ1, + .irq = { + [14] = INT_NUM_IM0_IRL0 + 22, + }, +}; + +static struct ltq_eth_data ltq_eth_data = { + .mii_mode = PHY_INTERFACE_MODE_MII, +}; + +static void __init easy50712_init(void) +{ + ltq_register_gpio_stp(); + ltq_register_nor(&easy50712_flash_data); + ltq_register_pci(<q_pci_data); + ltq_register_etop(<q_eth_data); +} + +MIPS_MACHINE(LTQ_MACH_EASY50712, + "EASY50712", + "EASY50712 Eval Board", + easy50712_init); diff --git a/arch/mips/lantiq/xway/pmu.c b/arch/mips/lantiq/xway/pmu.c new file mode 100644 index 0000000..9d69f01e --- /dev/null +++ b/arch/mips/lantiq/xway/pmu.c @@ -0,0 +1,70 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/version.h> +#include <linux/ioport.h> + +#include <lantiq_soc.h> + +/* PMU - the power management unit allows us to turn part of the core + * on and off + */ + +/* the enable / disable registers */ +#define LTQ_PMU_PWDCR 0x1C +#define LTQ_PMU_PWDSR 0x20 + +#define ltq_pmu_w32(x, y) ltq_w32((x), ltq_pmu_membase + (y)) +#define ltq_pmu_r32(x) ltq_r32(ltq_pmu_membase + (x)) + +static struct resource ltq_pmu_resource = { + .name = "pmu", + .start = LTQ_PMU_BASE_ADDR, + .end = LTQ_PMU_BASE_ADDR + LTQ_PMU_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static void __iomem *ltq_pmu_membase; + +void ltq_pmu_enable(unsigned int module) +{ + int err = 1000000; + + ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) & ~module, LTQ_PMU_PWDCR); + do {} while (--err && (ltq_pmu_r32(LTQ_PMU_PWDSR) & module)); + + if (!err) + panic("activating PMU module failed!\n"); +} +EXPORT_SYMBOL(ltq_pmu_enable); + +void ltq_pmu_disable(unsigned int module) +{ + ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) | module, LTQ_PMU_PWDCR); +} +EXPORT_SYMBOL(ltq_pmu_disable); + +int __init ltq_pmu_init(void) +{ + if (insert_resource(&iomem_resource, <q_pmu_resource) < 0) + panic("Failed to insert pmu memory\n"); + + if (request_mem_region(ltq_pmu_resource.start, + resource_size(<q_pmu_resource), "pmu") < 0) + panic("Failed to request pmu memory\n"); + + ltq_pmu_membase = ioremap_nocache(ltq_pmu_resource.start, + resource_size(<q_pmu_resource)); + if (!ltq_pmu_membase) + panic("Failed to remap pmu memory\n"); + return 0; +} + +core_initcall(ltq_pmu_init); diff --git a/arch/mips/lantiq/xway/prom-ase.c b/arch/mips/lantiq/xway/prom-ase.c new file mode 100644 index 0000000..abe49f4 --- /dev/null +++ b/arch/mips/lantiq/xway/prom-ase.c @@ -0,0 +1,39 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/module.h> +#include <linux/clk.h> +#include <asm/bootinfo.h> +#include <asm/time.h> + +#include <lantiq_soc.h> + +#include "../prom.h" + +#define SOC_AMAZON_SE "Amazon_SE" + +#define PART_SHIFT 12 +#define PART_MASK 0x0FFFFFFF +#define REV_SHIFT 28 +#define REV_MASK 0xF0000000 + +void __init ltq_soc_detect(struct ltq_soc_info *i) +{ + i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT; + i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT; + switch (i->partnum) { + case SOC_ID_AMAZON_SE: + i->name = SOC_AMAZON_SE; + i->type = SOC_TYPE_AMAZON_SE; + break; + + default: + unreachable(); + break; + } +} diff --git a/arch/mips/lantiq/xway/prom-xway.c b/arch/mips/lantiq/xway/prom-xway.c new file mode 100644 index 0000000..1686692a --- /dev/null +++ b/arch/mips/lantiq/xway/prom-xway.c @@ -0,0 +1,54 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/module.h> +#include <linux/clk.h> +#include <asm/bootinfo.h> +#include <asm/time.h> + +#include <lantiq_soc.h> + +#include "../prom.h" + +#define SOC_DANUBE "Danube" +#define SOC_TWINPASS "Twinpass" +#define SOC_AR9 "AR9" + +#define PART_SHIFT 12 +#define PART_MASK 0x0FFFFFFF +#define REV_SHIFT 28 +#define REV_MASK 0xF0000000 + +void __init ltq_soc_detect(struct ltq_soc_info *i) +{ + i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT; + i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT; + switch (i->partnum) { + case SOC_ID_DANUBE1: + case SOC_ID_DANUBE2: + i->name = SOC_DANUBE; + i->type = SOC_TYPE_DANUBE; + break; + + case SOC_ID_TWINPASS: + i->name = SOC_TWINPASS; + i->type = SOC_TYPE_DANUBE; + break; + + case SOC_ID_ARX188: + case SOC_ID_ARX168: + case SOC_ID_ARX182: + i->name = SOC_AR9; + i->type = SOC_TYPE_AR9; + break; + + default: + unreachable(); + break; + } +} diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c new file mode 100644 index 0000000..a1be36d --- /dev/null +++ b/arch/mips/lantiq/xway/reset.c @@ -0,0 +1,91 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/pm.h> +#include <linux/module.h> +#include <asm/reboot.h> + +#include <lantiq_soc.h> + +#define ltq_rcu_w32(x, y) ltq_w32((x), ltq_rcu_membase + (y)) +#define ltq_rcu_r32(x) ltq_r32(ltq_rcu_membase + (x)) + +/* register definitions */ +#define LTQ_RCU_RST 0x0010 +#define LTQ_RCU_RST_ALL 0x40000000 + +#define LTQ_RCU_RST_STAT 0x0014 +#define LTQ_RCU_STAT_SHIFT 26 + +static struct resource ltq_rcu_resource = { + .name = "rcu", + .start = LTQ_RCU_BASE_ADDR, + .end = LTQ_RCU_BASE_ADDR + LTQ_RCU_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +/* remapped base addr of the reset control unit */ +static void __iomem *ltq_rcu_membase; + +/* This function is used by the watchdog driver */ +int ltq_reset_cause(void) +{ + u32 val = ltq_rcu_r32(LTQ_RCU_RST_STAT); + return val >> LTQ_RCU_STAT_SHIFT; +} +EXPORT_SYMBOL_GPL(ltq_reset_cause); + +static void ltq_machine_restart(char *command) +{ + pr_notice("System restart\n"); + local_irq_disable(); + ltq_rcu_w32(ltq_rcu_r32(LTQ_RCU_RST) | LTQ_RCU_RST_ALL, LTQ_RCU_RST); + unreachable(); +} + +static void ltq_machine_halt(void) +{ + pr_notice("System halted.\n"); + local_irq_disable(); + unreachable(); +} + +static void ltq_machine_power_off(void) +{ + pr_notice("Please turn off the power now.\n"); + local_irq_disable(); + unreachable(); +} + +static int __init mips_reboot_setup(void) +{ + /* insert and request the memory region */ + if (insert_resource(&iomem_resource, <q_rcu_resource) < 0) + panic("Failed to insert rcu memory\n"); + + if (request_mem_region(ltq_rcu_resource.start, + resource_size(<q_rcu_resource), "rcu") < 0) + panic("Failed to request rcu memory\n"); + + /* remap rcu register range */ + ltq_rcu_membase = ioremap_nocache(ltq_rcu_resource.start, + resource_size(<q_rcu_resource)); + if (!ltq_rcu_membase) + panic("Failed to remap rcu memory\n"); + + _machine_restart = ltq_machine_restart; + _machine_halt = ltq_machine_halt; + pm_power_off = ltq_machine_power_off; + + return 0; +} + +arch_initcall(mips_reboot_setup); diff --git a/arch/mips/lantiq/xway/setup-ase.c b/arch/mips/lantiq/xway/setup-ase.c new file mode 100644 index 0000000..f6f3267 --- /dev/null +++ b/arch/mips/lantiq/xway/setup-ase.c @@ -0,0 +1,19 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#include <lantiq_soc.h> + +#include "../prom.h" +#include "devices.h" + +void __init ltq_soc_setup(void) +{ + ltq_register_ase_asc(); + ltq_register_gpio(); + ltq_register_wdt(); +} diff --git a/arch/mips/lantiq/xway/setup-xway.c b/arch/mips/lantiq/xway/setup-xway.c new file mode 100644 index 0000000..c292f64 --- /dev/null +++ b/arch/mips/lantiq/xway/setup-xway.c @@ -0,0 +1,20 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2011 John Crispin <blogic@openwrt.org> + */ + +#include <lantiq_soc.h> + +#include "../prom.h" +#include "devices.h" + +void __init ltq_soc_setup(void) +{ + ltq_register_asc(0); + ltq_register_asc(1); + ltq_register_gpio(); + ltq_register_wdt(); +} diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index 2adead5..b2cad4f 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_CPU_TX39XX) += r3k_dump_tlb.o obj-$(CONFIG_CPU_TX49XX) += dump_tlb.o obj-$(CONFIG_CPU_VR41XX) += dump_tlb.o obj-$(CONFIG_CPU_CAVIUM_OCTEON) += dump_tlb.o +obj-$(CONFIG_CPU_XLR) += dump_tlb.o # libgcc-style stuff needed in the kernel obj-y += ashldi3.o ashrdi3.o cmpdi2.o lshrdi3.o ucmpdi2.o diff --git a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c index 8c807c9..0cb1b97 100644 --- a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c +++ b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c @@ -201,8 +201,6 @@ static struct clocksource clocksource_mfgpt = { .rating = 120, /* Functional for real use, but not desired */ .read = mfgpt_read, .mask = CLOCKSOURCE_MASK(32), - .mult = 0, - .shift = 22, }; int __init init_mfgpt_clocksource(void) @@ -210,8 +208,7 @@ int __init init_mfgpt_clocksource(void) if (num_possible_cpus() > 1) /* MFGPT does not scale! */ return 0; - clocksource_mfgpt.mult = clocksource_hz2mult(MFGPT_TICK_RATE, 22); - return clocksource_register(&clocksource_mfgpt); + return clocksource_register_hz(&clocksource_mfgpt, MFGPT_TICK_RATE); } arch_initcall(init_mfgpt_clocksource); diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c index 11b193f..d93830a 100644 --- a/arch/mips/loongson/common/env.c +++ b/arch/mips/loongson/common/env.c @@ -29,9 +29,10 @@ unsigned long memsize, highmemsize; #define parse_even_earlier(res, option, p) \ do { \ - int ret; \ + unsigned int tmp __maybe_unused; \ + \ if (strncmp(option, (char *)p, strlen(option)) == 0) \ - ret = strict_strtol((char *)p + strlen(option"="), 10, &res); \ + tmp = strict_strtol((char *)p + strlen(option"="), 10, &res); \ } while (0) void __init prom_init_env(void) diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile index d679c77..4d8c162 100644 --- a/arch/mips/mm/Makefile +++ b/arch/mips/mm/Makefile @@ -3,7 +3,8 @@ # obj-y += cache.o dma-default.o extable.o fault.o \ - init.o tlbex.o tlbex-fault.o uasm.o page.o + init.o mmap.o tlbex.o tlbex-fault.o uasm.o \ + page.o obj-$(CONFIG_32BIT) += ioremap.o pgtable-32.o obj-$(CONFIG_64BIT) += pgtable-64.o @@ -29,6 +30,7 @@ obj-$(CONFIG_CPU_TX39XX) += c-tx39.o tlb-r3k.o obj-$(CONFIG_CPU_TX49XX) += c-r4k.o cex-gen.o tlb-r4k.o obj-$(CONFIG_CPU_VR41XX) += c-r4k.o cex-gen.o tlb-r4k.o obj-$(CONFIG_CPU_CAVIUM_OCTEON) += c-octeon.o cex-oct.o tlb-r4k.o +obj-$(CONFIG_CPU_XLR) += c-r4k.o tlb-r4k.o cex-gen.o obj-$(CONFIG_IP22_CPU_SCACHE) += sc-ip22.o obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index b4923a7..d9bc5d3 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -1006,6 +1006,7 @@ static void __cpuinit probe_pcache(void) case CPU_25KF: case CPU_SB1: case CPU_SB1A: + case CPU_XLR: c->dcache.flags |= MIPS_CACHE_PINDEX; break; @@ -1075,7 +1076,6 @@ static int __cpuinit probe_scache(void) unsigned long flags, addr, begin, end, pow2; unsigned int config = read_c0_config(); struct cpuinfo_mips *c = ¤t_cpu_data; - int tmp; if (config & CONF_SC) return 0; @@ -1108,7 +1108,6 @@ static int __cpuinit probe_scache(void) /* Now search for the wrap around point. */ pow2 = (128 * 1024); - tmp = 0; for (addr = begin + (128 * 1024); addr < end; addr = begin + pow2) { cache_op(Index_Load_Tag_SD, addr); __asm__ __volatile__("nop; nop; nop; nop;"); /* hazard... */ diff --git a/arch/mips/mm/mmap.c b/arch/mips/mm/mmap.c new file mode 100644 index 0000000..ae3c20a --- /dev/null +++ b/arch/mips/mm/mmap.c @@ -0,0 +1,122 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2011 Wind River Systems, + * written by Ralf Baechle <ralf@linux-mips.org> + */ +#include <linux/errno.h> +#include <linux/mm.h> +#include <linux/mman.h> +#include <linux/module.h> +#include <linux/random.h> +#include <linux/sched.h> + +unsigned long shm_align_mask = PAGE_SIZE - 1; /* Sane caches */ + +EXPORT_SYMBOL(shm_align_mask); + +#define COLOUR_ALIGN(addr,pgoff) \ + ((((addr) + shm_align_mask) & ~shm_align_mask) + \ + (((pgoff) << PAGE_SHIFT) & shm_align_mask)) + +unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, + unsigned long len, unsigned long pgoff, unsigned long flags) +{ + struct vm_area_struct * vmm; + int do_color_align; + + if (len > TASK_SIZE) + return -ENOMEM; + + if (flags & MAP_FIXED) { + /* Even MAP_FIXED mappings must reside within TASK_SIZE. */ + if (TASK_SIZE - len < addr) + return -EINVAL; + + /* + * We do not accept a shared mapping if it would violate + * cache aliasing constraints. + */ + if ((flags & MAP_SHARED) && + ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask)) + return -EINVAL; + return addr; + } + + do_color_align = 0; + if (filp || (flags & MAP_SHARED)) + do_color_align = 1; + if (addr) { + if (do_color_align) + addr = COLOUR_ALIGN(addr, pgoff); + else + addr = PAGE_ALIGN(addr); + vmm = find_vma(current->mm, addr); + if (TASK_SIZE - len >= addr && + (!vmm || addr + len <= vmm->vm_start)) + return addr; + } + addr = current->mm->mmap_base; + if (do_color_align) + addr = COLOUR_ALIGN(addr, pgoff); + else + addr = PAGE_ALIGN(addr); + + for (vmm = find_vma(current->mm, addr); ; vmm = vmm->vm_next) { + /* At this point: (!vmm || addr < vmm->vm_end). */ + if (TASK_SIZE - len < addr) + return -ENOMEM; + if (!vmm || addr + len <= vmm->vm_start) + return addr; + addr = vmm->vm_end; + if (do_color_align) + addr = COLOUR_ALIGN(addr, pgoff); + } +} + +void arch_pick_mmap_layout(struct mm_struct *mm) +{ + unsigned long random_factor = 0UL; + + if (current->flags & PF_RANDOMIZE) { + random_factor = get_random_int(); + random_factor = random_factor << PAGE_SHIFT; + if (TASK_IS_32BIT_ADDR) + random_factor &= 0xfffffful; + else + random_factor &= 0xffffffful; + } + + mm->mmap_base = TASK_UNMAPPED_BASE + random_factor; + mm->get_unmapped_area = arch_get_unmapped_area; + mm->unmap_area = arch_unmap_area; +} + +static inline unsigned long brk_rnd(void) +{ + unsigned long rnd = get_random_int(); + + rnd = rnd << PAGE_SHIFT; + /* 8MB for 32bit, 256MB for 64bit */ + if (TASK_IS_32BIT_ADDR) + rnd = rnd & 0x7ffffful; + else + rnd = rnd & 0xffffffful; + + return rnd; +} + +unsigned long arch_randomize_brk(struct mm_struct *mm) +{ + unsigned long base = mm->brk; + unsigned long ret; + + ret = PAGE_ALIGN(base + brk_rnd()); + + if (ret < mm->brk) + return mm->brk; + + return ret; +} diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 5ef294f..424ed4b 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -404,6 +404,7 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l, case CPU_5KC: case CPU_TX49XX: case CPU_PR4450: + case CPU_XLR: uasm_i_nop(p); tlbw(p); break; @@ -1151,8 +1152,8 @@ static void __cpuinit build_r4000_tlb_refill_handler(void) struct uasm_reloc *r = relocs; u32 *f; unsigned int final_len; - struct mips_huge_tlb_info htlb_info; - enum vmalloc64_mode vmalloc_mode; + struct mips_huge_tlb_info htlb_info __maybe_unused; + enum vmalloc64_mode vmalloc_mode __maybe_unused; memset(tlb_handler, 0, sizeof(tlb_handler)); memset(labels, 0, sizeof(labels)); diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c index 414f0c9..31180c3 100644 --- a/arch/mips/mti-malta/malta-init.c +++ b/arch/mips/mti-malta/malta-init.c @@ -193,8 +193,6 @@ extern struct plat_smp_ops msmtc_smp_ops; void __init prom_init(void) { - int result; - prom_argc = fw_arg0; _prom_argv = (int *) fw_arg1; _prom_envp = (int *) fw_arg2; @@ -360,20 +358,14 @@ void __init prom_init(void) #ifdef CONFIG_SERIAL_8250_CONSOLE console_config(); #endif - /* Early detection of CMP support */ - result = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ); - #ifdef CONFIG_MIPS_CMP - if (result) + /* Early detection of CMP support */ + if (gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ)) register_smp_ops(&cmp_smp_ops); + else #endif #ifdef CONFIG_MIPS_MT_SMP -#ifdef CONFIG_MIPS_CMP - if (!result) register_smp_ops(&vsmp_smp_ops); -#else - register_smp_ops(&vsmp_smp_ops); -#endif #endif #ifdef CONFIG_MIPS_MT_SMTC register_smp_ops(&msmtc_smp_ops); diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index 9027061..1d36c511 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -56,7 +56,6 @@ static DEFINE_RAW_SPINLOCK(mips_irq_lock); static inline int mips_pcibios_iack(void) { int irq; - u32 dummy; /* * Determine highest priority pending interrupt by performing @@ -83,7 +82,7 @@ static inline int mips_pcibios_iack(void) BONITO_PCIMAP_CFG = 0x20000; /* Flush Bonito register block */ - dummy = BONITO_PCIMAP_CFG; + (void) BONITO_PCIMAP_CFG; iob(); /* sync */ irq = __raw_readl((u32 *)_pcictrl_bonito_pcicfg); @@ -309,6 +308,8 @@ static void ipi_call_dispatch(void) static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id) { + scheduler_ipi(); + return IRQ_HANDLED; } diff --git a/arch/mips/netlogic/Kconfig b/arch/mips/netlogic/Kconfig new file mode 100644 index 0000000..a5ca743 --- /dev/null +++ b/arch/mips/netlogic/Kconfig @@ -0,0 +1,5 @@ +config NLM_COMMON + bool + +config NLM_XLR + bool diff --git a/arch/mips/netlogic/xlr/Makefile b/arch/mips/netlogic/xlr/Makefile new file mode 100644 index 0000000..9bd3f73 --- /dev/null +++ b/arch/mips/netlogic/xlr/Makefile @@ -0,0 +1,5 @@ +obj-y += setup.o platform.o irq.o setup.o time.o +obj-$(CONFIG_SMP) += smp.o smpboot.o +obj-$(CONFIG_EARLY_PRINTK) += xlr_console.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/netlogic/xlr/irq.c b/arch/mips/netlogic/xlr/irq.c new file mode 100644 index 0000000..1446d58e --- /dev/null +++ b/arch/mips/netlogic/xlr/irq.c @@ -0,0 +1,300 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/linkage.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/mm.h> + +#include <asm/mipsregs.h> + +#include <asm/netlogic/xlr/iomap.h> +#include <asm/netlogic/xlr/pic.h> +#include <asm/netlogic/xlr/xlr.h> + +#include <asm/netlogic/interrupt.h> +#include <asm/netlogic/mips-extns.h> + +static u64 nlm_irq_mask; +static DEFINE_SPINLOCK(nlm_pic_lock); + +static void xlr_pic_enable(struct irq_data *d) +{ + nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); + unsigned long flags; + nlm_reg_t reg; + int irq = d->irq; + + WARN(!PIC_IRQ_IS_IRT(irq), "Bad irq %d", irq); + + spin_lock_irqsave(&nlm_pic_lock, flags); + reg = netlogic_read_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE); + netlogic_write_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE, + reg | (1 << 6) | (1 << 30) | (1 << 31)); + spin_unlock_irqrestore(&nlm_pic_lock, flags); +} + +static void xlr_pic_mask(struct irq_data *d) +{ + nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); + unsigned long flags; + nlm_reg_t reg; + int irq = d->irq; + + WARN(!PIC_IRQ_IS_IRT(irq), "Bad irq %d", irq); + + spin_lock_irqsave(&nlm_pic_lock, flags); + reg = netlogic_read_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE); + netlogic_write_reg(mmio, PIC_IRT_1_BASE + irq - PIC_IRQ_BASE, + reg | (1 << 6) | (1 << 30) | (0 << 31)); + spin_unlock_irqrestore(&nlm_pic_lock, flags); +} + +#ifdef CONFIG_PCI +/* Extra ACK needed for XLR on chip PCI controller */ +static void xlr_pci_ack(struct irq_data *d) +{ + nlm_reg_t *pci_mmio = netlogic_io_mmio(NETLOGIC_IO_PCIX_OFFSET); + + netlogic_read_reg(pci_mmio, (0x140 >> 2)); +} + +/* Extra ACK needed for XLS on chip PCIe controller */ +static void xls_pcie_ack(struct irq_data *d) +{ + nlm_reg_t *pcie_mmio_le = netlogic_io_mmio(NETLOGIC_IO_PCIE_1_OFFSET); + + switch (d->irq) { + case PIC_PCIE_LINK0_IRQ: + netlogic_write_reg(pcie_mmio_le, (0x90 >> 2), 0xffffffff); + break; + case PIC_PCIE_LINK1_IRQ: + netlogic_write_reg(pcie_mmio_le, (0x94 >> 2), 0xffffffff); + break; + case PIC_PCIE_LINK2_IRQ: + netlogic_write_reg(pcie_mmio_le, (0x190 >> 2), 0xffffffff); + break; + case PIC_PCIE_LINK3_IRQ: + netlogic_write_reg(pcie_mmio_le, (0x194 >> 2), 0xffffffff); + break; + } +} + +/* For XLS B silicon, the 3,4 PCI interrupts are different */ +static void xls_pcie_ack_b(struct irq_data *d) +{ + nlm_reg_t *pcie_mmio_le = netlogic_io_mmio(NETLOGIC_IO_PCIE_1_OFFSET); + + switch (d->irq) { + case PIC_PCIE_LINK0_IRQ: + netlogic_write_reg(pcie_mmio_le, (0x90 >> 2), 0xffffffff); + break; + case PIC_PCIE_LINK1_IRQ: + netlogic_write_reg(pcie_mmio_le, (0x94 >> 2), 0xffffffff); + break; + case PIC_PCIE_XLSB0_LINK2_IRQ: + netlogic_write_reg(pcie_mmio_le, (0x190 >> 2), 0xffffffff); + break; + case PIC_PCIE_XLSB0_LINK3_IRQ: + netlogic_write_reg(pcie_mmio_le, (0x194 >> 2), 0xffffffff); + break; + } +} +#endif + +static void xlr_pic_ack(struct irq_data *d) +{ + unsigned long flags; + nlm_reg_t *mmio; + int irq = d->irq; + void *hd = irq_data_get_irq_handler_data(d); + + WARN(!PIC_IRQ_IS_IRT(irq), "Bad irq %d", irq); + + if (hd) { + void (*extra_ack)(void *) = hd; + extra_ack(d); + } + mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); + spin_lock_irqsave(&nlm_pic_lock, flags); + netlogic_write_reg(mmio, PIC_INT_ACK, (1 << (irq - PIC_IRQ_BASE))); + spin_unlock_irqrestore(&nlm_pic_lock, flags); +} + +/* + * This chip definition handles interrupts routed thru the XLR + * hardware PIC, currently IRQs 8-39 are mapped to hardware intr + * 0-31 wired the XLR PIC + */ +static struct irq_chip xlr_pic = { + .name = "XLR-PIC", + .irq_enable = xlr_pic_enable, + .irq_mask = xlr_pic_mask, + .irq_ack = xlr_pic_ack, +}; + +static void rsvd_irq_handler(struct irq_data *d) +{ + WARN(d->irq >= PIC_IRQ_BASE, "Bad irq %d", d->irq); +} + +/* + * Chip definition for CPU originated interrupts(timer, msg) and + * IPIs + */ +struct irq_chip nlm_cpu_intr = { + .name = "XLR-CPU-INTR", + .irq_enable = rsvd_irq_handler, + .irq_mask = rsvd_irq_handler, + .irq_ack = rsvd_irq_handler, +}; + +void __init init_xlr_irqs(void) +{ + nlm_reg_t *mmio = netlogic_io_mmio(NETLOGIC_IO_PIC_OFFSET); + uint32_t thread_mask = 1; + int level, i; + + pr_info("Interrupt thread mask [%x]\n", thread_mask); + for (i = 0; i < PIC_NUM_IRTS; i++) { + level = PIC_IRQ_IS_EDGE_TRIGGERED(i); + + /* Bind all PIC irqs to boot cpu */ + netlogic_write_reg(mmio, PIC_IRT_0_BASE + i, thread_mask); + + /* + * Use local scheduling and high polarity for all IRTs + * Invalidate all IRTs, by default + */ + netlogic_write_reg(mmio, PIC_IRT_1_BASE + i, + (level << 30) | (1 << 6) | (PIC_IRQ_BASE + i)); + } + + /* Make all IRQs as level triggered by default */ + for (i = 0; i < NR_IRQS; i++) { + if (PIC_IRQ_IS_IRT(i)) + irq_set_chip_and_handler(i, &xlr_pic, handle_level_irq); + else + irq_set_chip_and_handler(i, &nlm_cpu_intr, + handle_level_irq); + } +#ifdef CONFIG_SMP + irq_set_chip_and_handler(IRQ_IPI_SMP_FUNCTION, &nlm_cpu_intr, + nlm_smp_function_ipi_handler); + irq_set_chip_and_handler(IRQ_IPI_SMP_RESCHEDULE, &nlm_cpu_intr, + nlm_smp_resched_ipi_handler); + nlm_irq_mask |= + ((1ULL << IRQ_IPI_SMP_FUNCTION) | (1ULL << IRQ_IPI_SMP_RESCHEDULE)); +#endif + +#ifdef CONFIG_PCI + /* + * For PCI interrupts, we need to ack the PIC controller too, overload + * irq handler data to do this + */ + if (nlm_chip_is_xls()) { + if (nlm_chip_is_xls_b()) { + irq_set_handler_data(PIC_PCIE_LINK0_IRQ, + xls_pcie_ack_b); + irq_set_handler_data(PIC_PCIE_LINK1_IRQ, + xls_pcie_ack_b); + irq_set_handler_data(PIC_PCIE_XLSB0_LINK2_IRQ, + xls_pcie_ack_b); + irq_set_handler_data(PIC_PCIE_XLSB0_LINK3_IRQ, + xls_pcie_ack_b); + } else { + irq_set_handler_data(PIC_PCIE_LINK0_IRQ, xls_pcie_ack); + irq_set_handler_data(PIC_PCIE_LINK1_IRQ, xls_pcie_ack); + irq_set_handler_data(PIC_PCIE_LINK2_IRQ, xls_pcie_ack); + irq_set_handler_data(PIC_PCIE_LINK3_IRQ, xls_pcie_ack); + } + } else { + /* XLR PCI controller ACK */ + irq_set_handler_data(PIC_PCIE_XLSB0_LINK3_IRQ, xlr_pci_ack); + } +#endif + /* unmask all PIC related interrupts. If no handler is installed by the + * drivers, it'll just ack the interrupt and return + */ + for (i = PIC_IRT_FIRST_IRQ; i <= PIC_IRT_LAST_IRQ; i++) + nlm_irq_mask |= (1ULL << i); + + nlm_irq_mask |= (1ULL << IRQ_TIMER); +} + +void __init arch_init_irq(void) +{ + /* Initialize the irq descriptors */ + init_xlr_irqs(); + write_c0_eimr(nlm_irq_mask); +} + +void __cpuinit nlm_smp_irq_init(void) +{ + /* set interrupt mask for non-zero cpus */ + write_c0_eimr(nlm_irq_mask); +} + +asmlinkage void plat_irq_dispatch(void) +{ + uint64_t eirr; + int i; + + eirr = read_c0_eirr() & read_c0_eimr(); + if (!eirr) + return; + + /* no need of EIRR here, writing compare clears interrupt */ + if (eirr & (1 << IRQ_TIMER)) { + do_IRQ(IRQ_TIMER); + return; + } + + /* use dcltz: optimize below code */ + for (i = 63; i != -1; i--) { + if (eirr & (1ULL << i)) + break; + } + if (i == -1) { + pr_err("no interrupt !!\n"); + return; + } + + /* Ack eirr */ + write_c0_eirr(1ULL << i); + + do_IRQ(i); +} diff --git a/arch/mips/netlogic/xlr/platform.c b/arch/mips/netlogic/xlr/platform.c new file mode 100644 index 0000000..609ec25 --- /dev/null +++ b/arch/mips/netlogic/xlr/platform.c @@ -0,0 +1,98 @@ +/* + * Copyright 2011, Netlogic Microsystems. + * Copyright 2004, Matt Porter <mporter@kernel.crashing.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/resource.h> +#include <linux/serial_8250.h> +#include <linux/serial_reg.h> + +#include <asm/netlogic/xlr/iomap.h> +#include <asm/netlogic/xlr/pic.h> +#include <asm/netlogic/xlr/xlr.h> + +unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset) +{ + nlm_reg_t *mmio; + unsigned int value; + + /* XLR uart does not need any mapping of regs */ + mmio = (nlm_reg_t *)(p->membase + (offset << p->regshift)); + value = netlogic_read_reg(mmio, 0); + + /* See XLR/XLS errata */ + if (offset == UART_MSR) + value ^= 0xF0; + else if (offset == UART_MCR) + value ^= 0x3; + + return value; +} + +void nlm_xlr_uart_out(struct uart_port *p, int offset, int value) +{ + nlm_reg_t *mmio; + + /* XLR uart does not need any mapping of regs */ + mmio = (nlm_reg_t *)(p->membase + (offset << p->regshift)); + + /* See XLR/XLS errata */ + if (offset == UART_MSR) + value ^= 0xF0; + else if (offset == UART_MCR) + value ^= 0x3; + + netlogic_write_reg(mmio, 0, value); +} + +#define PORT(_irq) \ + { \ + .irq = _irq, \ + .regshift = 2, \ + .iotype = UPIO_MEM32, \ + .flags = (UPF_SKIP_TEST | \ + UPF_FIXED_TYPE | UPF_BOOT_AUTOCONF),\ + .uartclk = PIC_CLKS_PER_SEC, \ + .type = PORT_16550A, \ + .serial_in = nlm_xlr_uart_in, \ + .serial_out = nlm_xlr_uart_out, \ + } + +static struct plat_serial8250_port xlr_uart_data[] = { + PORT(PIC_UART_0_IRQ), + PORT(PIC_UART_1_IRQ), + {}, +}; + +static struct platform_device uart_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = xlr_uart_data, + }, +}; + +static int __init nlm_uart_init(void) +{ + nlm_reg_t *mmio; + + mmio = netlogic_io_mmio(NETLOGIC_IO_UART_0_OFFSET); + xlr_uart_data[0].membase = (void __iomem *)mmio; + xlr_uart_data[0].mapbase = CPHYSADDR((unsigned long)mmio); + + mmio = netlogic_io_mmio(NETLOGIC_IO_UART_1_OFFSET); + xlr_uart_data[1].membase = (void __iomem *)mmio; + xlr_uart_data[1].mapbase = CPHYSADDR((unsigned long)mmio); + + return platform_device_register(&uart_device); +} + +arch_initcall(nlm_uart_init); diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c new file mode 100644 index 0000000..4828025 --- /dev/null +++ b/arch/mips/netlogic/xlr/setup.c @@ -0,0 +1,188 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/kernel.h> +#include <linux/serial_8250.h> +#include <linux/pm.h> + +#include <asm/reboot.h> +#include <asm/time.h> +#include <asm/bootinfo.h> +#include <asm/smp-ops.h> + +#include <asm/netlogic/interrupt.h> +#include <asm/netlogic/psb-bootinfo.h> + +#include <asm/netlogic/xlr/xlr.h> +#include <asm/netlogic/xlr/iomap.h> +#include <asm/netlogic/xlr/pic.h> +#include <asm/netlogic/xlr/gpio.h> + +unsigned long netlogic_io_base = (unsigned long)(DEFAULT_NETLOGIC_IO_BASE); +unsigned long nlm_common_ebase = 0x0; +struct psb_info nlm_prom_info; + +static void nlm_early_serial_setup(void) +{ + struct uart_port s; + nlm_reg_t *uart_base; + + uart_base = netlogic_io_mmio(NETLOGIC_IO_UART_0_OFFSET); + memset(&s, 0, sizeof(s)); + s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST; + s.iotype = UPIO_MEM32; + s.regshift = 2; + s.irq = PIC_UART_0_IRQ; + s.uartclk = PIC_CLKS_PER_SEC; + s.serial_in = nlm_xlr_uart_in; + s.serial_out = nlm_xlr_uart_out; + s.mapbase = (unsigned long)uart_base; + s.membase = (unsigned char __iomem *)uart_base; + early_serial_setup(&s); +} + +static void nlm_linux_exit(void) +{ + nlm_reg_t *mmio; + + mmio = netlogic_io_mmio(NETLOGIC_IO_GPIO_OFFSET); + /* trigger a chip reset by writing 1 to GPIO_SWRESET_REG */ + netlogic_write_reg(mmio, NETLOGIC_GPIO_SWRESET_REG, 1); + for ( ; ; ) + cpu_wait(); +} + +void __init plat_mem_setup(void) +{ + panic_timeout = 5; + _machine_restart = (void (*)(char *))nlm_linux_exit; + _machine_halt = nlm_linux_exit; + pm_power_off = nlm_linux_exit; +} + +const char *get_system_type(void) +{ + return "Netlogic XLR/XLS Series"; +} + +void __init prom_free_prom_memory(void) +{ + /* Nothing yet */ +} + +static void build_arcs_cmdline(int *argv) +{ + int i, remain, len; + char *arg; + + remain = sizeof(arcs_cmdline) - 1; + arcs_cmdline[0] = '\0'; + for (i = 0; argv[i] != 0; i++) { + arg = (char *)(long)argv[i]; + len = strlen(arg); + if (len + 1 > remain) + break; + strcat(arcs_cmdline, arg); + strcat(arcs_cmdline, " "); + remain -= len + 1; + } + + /* Add the default options here */ + if ((strstr(arcs_cmdline, "console=")) == NULL) { + arg = "console=ttyS0,38400 "; + len = strlen(arg); + if (len > remain) + goto fail; + strcat(arcs_cmdline, arg); + remain -= len; + } +#ifdef CONFIG_BLK_DEV_INITRD + if ((strstr(arcs_cmdline, "rdinit=")) == NULL) { + arg = "rdinit=/sbin/init "; + len = strlen(arg); + if (len > remain) + goto fail; + strcat(arcs_cmdline, arg); + remain -= len; + } +#endif + return; +fail: + panic("Cannot add %s, command line too big!", arg); +} + +static void prom_add_memory(void) +{ + struct nlm_boot_mem_map *bootm; + u64 start, size; + u64 pref_backup = 512; /* avoid pref walking beyond end */ + int i; + + bootm = (void *)(long)nlm_prom_info.psb_mem_map; + for (i = 0; i < bootm->nr_map; i++) { + if (bootm->map[i].type != BOOT_MEM_RAM) + continue; + start = bootm->map[i].addr; + size = bootm->map[i].size; + + /* Work around for using bootloader mem */ + if (i == 0 && start == 0 && size == 0x0c000000) + size = 0x0ff00000; + + add_memory_region(start, size - pref_backup, BOOT_MEM_RAM); + } +} + +void __init prom_init(void) +{ + int *argv, *envp; /* passed as 32 bit ptrs */ + struct psb_info *prom_infop; + + /* truncate to 32 bit and sign extend all args */ + argv = (int *)(long)(int)fw_arg1; + envp = (int *)(long)(int)fw_arg2; + prom_infop = (struct psb_info *)(long)(int)fw_arg3; + + nlm_prom_info = *prom_infop; + + nlm_early_serial_setup(); + build_arcs_cmdline(argv); + nlm_common_ebase = read_c0_ebase() & (~((1 << 12) - 1)); + prom_add_memory(); + +#ifdef CONFIG_SMP + nlm_wakeup_secondary_cpus(nlm_prom_info.online_cpu_map); + register_smp_ops(&nlm_smp_ops); +#endif +} diff --git a/arch/mips/netlogic/xlr/smp.c b/arch/mips/netlogic/xlr/smp.c new file mode 100644 index 0000000..b495a7f --- /dev/null +++ b/arch/mips/netlogic/xlr/smp.c @@ -0,0 +1,225 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/irq.h> + +#include <asm/mmu_context.h> + +#include <asm/netlogic/interrupt.h> +#include <asm/netlogic/mips-extns.h> + +#include <asm/netlogic/xlr/iomap.h> +#include <asm/netlogic/xlr/pic.h> +#include <asm/netlogic/xlr/xlr.h> + +void core_send_ipi(int logical_cpu, unsigned int action) +{ + int cpu = cpu_logical_map(logical_cpu); + u32 tid = cpu & 0x3; + u32 pid = (cpu >> 2) & 0x07; + u32 ipi = (tid << 16) | (pid << 20); + + if (action & SMP_CALL_FUNCTION) + ipi |= IRQ_IPI_SMP_FUNCTION; + else if (action & SMP_RESCHEDULE_YOURSELF) + ipi |= IRQ_IPI_SMP_RESCHEDULE; + else + return; + + pic_send_ipi(ipi); +} + +void nlm_send_ipi_single(int cpu, unsigned int action) +{ + core_send_ipi(cpu, action); +} + +void nlm_send_ipi_mask(const struct cpumask *mask, unsigned int action) +{ + int cpu; + + for_each_cpu(cpu, mask) { + core_send_ipi(cpu, action); + } +} + +/* IRQ_IPI_SMP_FUNCTION Handler */ +void nlm_smp_function_ipi_handler(unsigned int irq, struct irq_desc *desc) +{ + smp_call_function_interrupt(); +} + +/* IRQ_IPI_SMP_RESCHEDULE handler */ +void nlm_smp_resched_ipi_handler(unsigned int irq, struct irq_desc *desc) +{ + set_need_resched(); +} + +void nlm_common_ipi_handler(int irq, struct pt_regs *regs) +{ + if (irq == IRQ_IPI_SMP_FUNCTION) { + smp_call_function_interrupt(); + } else { + /* Announce that we are for reschduling */ + set_need_resched(); + } +} + +/* + * Called before going into mips code, early cpu init + */ +void nlm_early_init_secondary(void) +{ + write_c0_ebase((uint32_t)nlm_common_ebase); + /* TLB partition here later */ +} + +/* + * Code to run on secondary just after probing the CPU + */ +static void __cpuinit nlm_init_secondary(void) +{ + nlm_smp_irq_init(); +} + +void nlm_smp_finish(void) +{ +#ifdef notyet + nlm_common_msgring_cpu_init(); +#endif +} + +void nlm_cpus_done(void) +{ +} + +/* + * Boot all other cpus in the system, initialize them, and bring them into + * the boot function + */ +int nlm_cpu_unblock[NR_CPUS]; +int nlm_cpu_ready[NR_CPUS]; +unsigned long nlm_next_gp; +unsigned long nlm_next_sp; +cpumask_t phys_cpu_present_map; + +void nlm_boot_secondary(int logical_cpu, struct task_struct *idle) +{ + unsigned long gp = (unsigned long)task_thread_info(idle); + unsigned long sp = (unsigned long)__KSTK_TOS(idle); + int cpu = cpu_logical_map(logical_cpu); + + nlm_next_sp = sp; + nlm_next_gp = gp; + + /* barrier */ + __sync(); + nlm_cpu_unblock[cpu] = 1; +} + +void __init nlm_smp_setup(void) +{ + unsigned int boot_cpu; + int num_cpus, i; + + boot_cpu = hard_smp_processor_id(); + cpus_clear(phys_cpu_present_map); + + cpu_set(boot_cpu, phys_cpu_present_map); + __cpu_number_map[boot_cpu] = 0; + __cpu_logical_map[0] = boot_cpu; + cpu_set(0, cpu_possible_map); + + num_cpus = 1; + for (i = 0; i < NR_CPUS; i++) { + if (nlm_cpu_ready[i]) { + cpu_set(i, phys_cpu_present_map); + __cpu_number_map[i] = num_cpus; + __cpu_logical_map[num_cpus] = i; + cpu_set(num_cpus, cpu_possible_map); + ++num_cpus; + } + } + + pr_info("Phys CPU present map: %lx, possible map %lx\n", + (unsigned long)phys_cpu_present_map.bits[0], + (unsigned long)cpu_possible_map.bits[0]); + + pr_info("Detected %i Slave CPU(s)\n", num_cpus); +} + +void nlm_prepare_cpus(unsigned int max_cpus) +{ +} + +struct plat_smp_ops nlm_smp_ops = { + .send_ipi_single = nlm_send_ipi_single, + .send_ipi_mask = nlm_send_ipi_mask, + .init_secondary = nlm_init_secondary, + .smp_finish = nlm_smp_finish, + .cpus_done = nlm_cpus_done, + .boot_secondary = nlm_boot_secondary, + .smp_setup = nlm_smp_setup, + .prepare_cpus = nlm_prepare_cpus, +}; + +unsigned long secondary_entry_point; + +int nlm_wakeup_secondary_cpus(u32 wakeup_mask) +{ + unsigned int tid, pid, ipi, i, boot_cpu; + void *reset_vec; + + secondary_entry_point = (unsigned long)prom_pre_boot_secondary_cpus; + reset_vec = (void *)CKSEG1ADDR(0x1fc00000); + memcpy(reset_vec, nlm_boot_smp_nmi, 0x80); + boot_cpu = hard_smp_processor_id(); + + for (i = 0; i < NR_CPUS; i++) { + if (i == boot_cpu) + continue; + if (wakeup_mask & (1u << i)) { + tid = i & 0x3; + pid = (i >> 2) & 0x7; + ipi = (tid << 16) | (pid << 20) | (1 << 8); + pic_send_ipi(ipi); + } + } + + return 0; +} diff --git a/arch/mips/netlogic/xlr/smpboot.S b/arch/mips/netlogic/xlr/smpboot.S new file mode 100644 index 0000000..b8e0744 --- /dev/null +++ b/arch/mips/netlogic/xlr/smpboot.S @@ -0,0 +1,94 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <asm/asm.h> +#include <asm/asm-offsets.h> +#include <asm/regdef.h> +#include <asm/mipsregs.h> + + +/* Don't jump to linux function from Bootloader stack. Change it + * here. Kernel might allocate bootloader memory before all the CPUs are + * brought up (eg: Inode cache region) and we better don't overwrite this + * memory + */ +NESTED(prom_pre_boot_secondary_cpus, 16, sp) + .set mips64 + mfc0 t0, $15, 1 # read ebase + andi t0, 0x1f # t0 has the processor_id() + sll t0, 2 # offset in cpu array + + PTR_LA t1, nlm_cpu_ready # mark CPU ready + PTR_ADDU t1, t0 + li t2, 1 + sw t2, 0(t1) + + PTR_LA t1, nlm_cpu_unblock + PTR_ADDU t1, t0 +1: lw t2, 0(t1) # wait till unblocked + beqz t2, 1b + nop + + PTR_LA t1, nlm_next_sp + PTR_L sp, 0(t1) + PTR_LA t1, nlm_next_gp + PTR_L gp, 0(t1) + + PTR_LA t0, nlm_early_init_secondary + jalr t0 + nop + + PTR_LA t0, smp_bootstrap + jr t0 + nop +END(prom_pre_boot_secondary_cpus) + +NESTED(nlm_boot_smp_nmi, 0, sp) + .set push + .set noat + .set mips64 + .set noreorder + + /* Clear the NMI and BEV bits */ + MFC0 k0, CP0_STATUS + li k1, 0xffb7ffff + and k0, k0, k1 + MTC0 k0, CP0_STATUS + + PTR_LA k1, secondary_entry_point + PTR_L k0, 0(k1) + jr k0 + nop + .set pop +END(nlm_boot_smp_nmi) diff --git a/arch/mips/netlogic/xlr/time.c b/arch/mips/netlogic/xlr/time.c new file mode 100644 index 0000000..0d81b26 --- /dev/null +++ b/arch/mips/netlogic/xlr/time.c @@ -0,0 +1,51 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/init.h> + +#include <asm/time.h> +#include <asm/netlogic/interrupt.h> +#include <asm/netlogic/psb-bootinfo.h> + +unsigned int __cpuinit get_c0_compare_int(void) +{ + return IRQ_TIMER; +} + +void __init plat_time_init(void) +{ + mips_hpt_frequency = nlm_prom_info.cpu_frequency; + pr_info("MIPS counter frequency [%ld]\n", + (unsigned long)mips_hpt_frequency); +} diff --git a/arch/mips/netlogic/xlr/xlr_console.c b/arch/mips/netlogic/xlr/xlr_console.c new file mode 100644 index 0000000..759df06 --- /dev/null +++ b/arch/mips/netlogic/xlr/xlr_console.c @@ -0,0 +1,46 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/types.h> +#include <asm/netlogic/xlr/iomap.h> + +void prom_putchar(char c) +{ + nlm_reg_t *mmio; + + mmio = netlogic_io_mmio(NETLOGIC_IO_UART_0_OFFSET); + while (netlogic_read_reg(mmio, 0x5) == 0) + ; + netlogic_write_reg(mmio, 0x0, c); +} diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index c9209ca..4df8799 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o obj-$(CONFIG_SIBYTE_BCM112X) += fixup-sb1250.o pci-sb1250.o obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o +obj-$(CONFIG_SOC_XWAY) += pci-lantiq.o ops-lantiq.o obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o @@ -55,6 +56,7 @@ obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o obj-$(CONFIG_MIKROTIK_RB532) += pci-rc32434.o ops-rc32434.o fixup-rc32434.o obj-$(CONFIG_CPU_CAVIUM_OCTEON) += pci-octeon.o pcie-octeon.o +obj-$(CONFIG_NLM_XLR) += pci-xlr.o ifdef CONFIG_PCI_MSI obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o diff --git a/arch/mips/pci/ops-lantiq.c b/arch/mips/pci/ops-lantiq.c new file mode 100644 index 0000000..1f2afb5 --- /dev/null +++ b/arch/mips/pci/ops-lantiq.c @@ -0,0 +1,116 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/mm.h> +#include <asm/addrspace.h> +#include <linux/vmalloc.h> + +#include <lantiq_soc.h> + +#include "pci-lantiq.h" + +#define LTQ_PCI_CFG_BUSNUM_SHF 16 +#define LTQ_PCI_CFG_DEVNUM_SHF 11 +#define LTQ_PCI_CFG_FUNNUM_SHF 8 + +#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_WRITE 1 + +static int ltq_pci_config_access(unsigned char access_type, struct pci_bus *bus, + unsigned int devfn, unsigned int where, u32 *data) +{ + unsigned long cfg_base; + unsigned long flags; + u32 temp; + + /* we support slot from 0 to 15 dev_fn & 0x68 (AD29) is the + SoC itself */ + if ((bus->number != 0) || ((devfn & 0xf8) > 0x78) + || ((devfn & 0xf8) == 0) || ((devfn & 0xf8) == 0x68)) + return 1; + + spin_lock_irqsave(&ebu_lock, flags); + + cfg_base = (unsigned long) ltq_pci_mapped_cfg; + cfg_base |= (bus->number << LTQ_PCI_CFG_BUSNUM_SHF) | (devfn << + LTQ_PCI_CFG_FUNNUM_SHF) | (where & ~0x3); + + /* Perform access */ + if (access_type == PCI_ACCESS_WRITE) { + ltq_w32(swab32(*data), ((u32 *)cfg_base)); + } else { + *data = ltq_r32(((u32 *)(cfg_base))); + *data = swab32(*data); + } + wmb(); + + /* clean possible Master abort */ + cfg_base = (unsigned long) ltq_pci_mapped_cfg; + cfg_base |= (0x0 << LTQ_PCI_CFG_FUNNUM_SHF) + 4; + temp = ltq_r32(((u32 *)(cfg_base))); + temp = swab32(temp); + cfg_base = (unsigned long) ltq_pci_mapped_cfg; + cfg_base |= (0x68 << LTQ_PCI_CFG_FUNNUM_SHF) + 4; + ltq_w32(temp, ((u32 *)cfg_base)); + + spin_unlock_irqrestore(&ebu_lock, flags); + + if (((*data) == 0xffffffff) && (access_type == PCI_ACCESS_READ)) + return 1; + + return 0; +} + +int ltq_pci_read_config_dword(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + u32 data = 0; + + if (ltq_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (size == 1) + *val = (data >> ((where & 3) << 3)) & 0xff; + else if (size == 2) + *val = (data >> ((where & 3) << 3)) & 0xffff; + else + *val = data; + + return PCIBIOS_SUCCESSFUL; +} + +int ltq_pci_write_config_dword(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + u32 data = 0; + + if (size == 4) { + data = val; + } else { + if (ltq_pci_config_access(PCI_ACCESS_READ, bus, + devfn, where, &data)) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (size == 1) + data = (data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + else if (size == 2) + data = (data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + } + + if (ltq_pci_config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) + return PCIBIOS_DEVICE_NOT_FOUND; + + return PCIBIOS_SUCCESSFUL; +} diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c new file mode 100644 index 0000000..603d749 --- /dev/null +++ b/arch/mips/pci/pci-lantiq.c @@ -0,0 +1,297 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/mm.h> +#include <linux/vmalloc.h> +#include <linux/platform_device.h> + +#include <asm/pci.h> +#include <asm/gpio.h> +#include <asm/addrspace.h> + +#include <lantiq_soc.h> +#include <lantiq_irq.h> +#include <lantiq_platform.h> + +#include "pci-lantiq.h" + +#define LTQ_PCI_CFG_BASE 0x17000000 +#define LTQ_PCI_CFG_SIZE 0x00008000 +#define LTQ_PCI_MEM_BASE 0x18000000 +#define LTQ_PCI_MEM_SIZE 0x02000000 +#define LTQ_PCI_IO_BASE 0x1AE00000 +#define LTQ_PCI_IO_SIZE 0x00200000 + +#define PCI_CR_FCI_ADDR_MAP0 0x00C0 +#define PCI_CR_FCI_ADDR_MAP1 0x00C4 +#define PCI_CR_FCI_ADDR_MAP2 0x00C8 +#define PCI_CR_FCI_ADDR_MAP3 0x00CC +#define PCI_CR_FCI_ADDR_MAP4 0x00D0 +#define PCI_CR_FCI_ADDR_MAP5 0x00D4 +#define PCI_CR_FCI_ADDR_MAP6 0x00D8 +#define PCI_CR_FCI_ADDR_MAP7 0x00DC +#define PCI_CR_CLK_CTRL 0x0000 +#define PCI_CR_PCI_MOD 0x0030 +#define PCI_CR_PC_ARB 0x0080 +#define PCI_CR_FCI_ADDR_MAP11hg 0x00E4 +#define PCI_CR_BAR11MASK 0x0044 +#define PCI_CR_BAR12MASK 0x0048 +#define PCI_CR_BAR13MASK 0x004C +#define PCI_CS_BASE_ADDR1 0x0010 +#define PCI_CR_PCI_ADDR_MAP11 0x0064 +#define PCI_CR_FCI_BURST_LENGTH 0x00E8 +#define PCI_CR_PCI_EOI 0x002C +#define PCI_CS_STS_CMD 0x0004 + +#define PCI_MASTER0_REQ_MASK_2BITS 8 +#define PCI_MASTER1_REQ_MASK_2BITS 10 +#define PCI_MASTER2_REQ_MASK_2BITS 12 +#define INTERNAL_ARB_ENABLE_BIT 0 + +#define LTQ_CGU_IFCCR 0x0018 +#define LTQ_CGU_PCICR 0x0034 + +#define ltq_pci_w32(x, y) ltq_w32((x), ltq_pci_membase + (y)) +#define ltq_pci_r32(x) ltq_r32(ltq_pci_membase + (x)) + +#define ltq_pci_cfg_w32(x, y) ltq_w32((x), ltq_pci_mapped_cfg + (y)) +#define ltq_pci_cfg_r32(x) ltq_r32(ltq_pci_mapped_cfg + (x)) + +struct ltq_pci_gpio_map { + int pin; + int alt0; + int alt1; + int dir; + char *name; +}; + +/* the pci core can make use of the following gpios */ +static struct ltq_pci_gpio_map ltq_pci_gpio_map[] = { + { 0, 1, 0, 0, "pci-exin0" }, + { 1, 1, 0, 0, "pci-exin1" }, + { 2, 1, 0, 0, "pci-exin2" }, + { 39, 1, 0, 0, "pci-exin3" }, + { 10, 1, 0, 0, "pci-exin4" }, + { 9, 1, 0, 0, "pci-exin5" }, + { 30, 1, 0, 1, "pci-gnt1" }, + { 23, 1, 0, 1, "pci-gnt2" }, + { 19, 1, 0, 1, "pci-gnt3" }, + { 38, 1, 0, 1, "pci-gnt4" }, + { 29, 1, 0, 0, "pci-req1" }, + { 31, 1, 0, 0, "pci-req2" }, + { 3, 1, 0, 0, "pci-req3" }, + { 37, 1, 0, 0, "pci-req4" }, +}; + +__iomem void *ltq_pci_mapped_cfg; +static __iomem void *ltq_pci_membase; + +int (*ltqpci_plat_dev_init)(struct pci_dev *dev) = NULL; + +/* Since the PCI REQ pins can be reused for other functionality, make it + possible to exclude those from interpretation by the PCI controller */ +static int ltq_pci_req_mask = 0xf; + +static int *ltq_pci_irq_map; + +struct pci_ops ltq_pci_ops = { + .read = ltq_pci_read_config_dword, + .write = ltq_pci_write_config_dword +}; + +static struct resource pci_io_resource = { + .name = "pci io space", + .start = LTQ_PCI_IO_BASE, + .end = LTQ_PCI_IO_BASE + LTQ_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource pci_mem_resource = { + .name = "pci memory space", + .start = LTQ_PCI_MEM_BASE, + .end = LTQ_PCI_MEM_BASE + LTQ_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +static struct pci_controller ltq_pci_controller = { + .pci_ops = <q_pci_ops, + .mem_resource = &pci_mem_resource, + .mem_offset = 0x00000000UL, + .io_resource = &pci_io_resource, + .io_offset = 0x00000000UL, +}; + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + if (ltqpci_plat_dev_init) + return ltqpci_plat_dev_init(dev); + + return 0; +} + +static u32 ltq_calc_bar11mask(void) +{ + u32 mem, bar11mask; + + /* BAR11MASK value depends on available memory on system. */ + mem = num_physpages * PAGE_SIZE; + bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) - 1)) - 1)) | 8; + + return bar11mask; +} + +static void ltq_pci_setup_gpio(int gpio) +{ + int i; + for (i = 0; i < ARRAY_SIZE(ltq_pci_gpio_map); i++) { + if (gpio & (1 << i)) { + ltq_gpio_request(ltq_pci_gpio_map[i].pin, + ltq_pci_gpio_map[i].alt0, + ltq_pci_gpio_map[i].alt1, + ltq_pci_gpio_map[i].dir, + ltq_pci_gpio_map[i].name); + } + } + ltq_gpio_request(21, 0, 0, 1, "pci-reset"); + ltq_pci_req_mask = (gpio >> PCI_REQ_SHIFT) & PCI_REQ_MASK; +} + +static int __devinit ltq_pci_startup(struct ltq_pci_data *conf) +{ + u32 temp_buffer; + + /* set clock to 33Mhz */ + ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~0xf00000, LTQ_CGU_IFCCR); + ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | 0x800000, LTQ_CGU_IFCCR); + + /* external or internal clock ? */ + if (conf->clock) { + ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~(1 << 16), + LTQ_CGU_IFCCR); + ltq_cgu_w32((1 << 30), LTQ_CGU_PCICR); + } else { + ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | (1 << 16), + LTQ_CGU_IFCCR); + ltq_cgu_w32((1 << 31) | (1 << 30), LTQ_CGU_PCICR); + } + + /* setup pci clock and gpis used by pci */ + ltq_pci_setup_gpio(conf->gpio); + + /* enable auto-switching between PCI and EBU */ + ltq_pci_w32(0xa, PCI_CR_CLK_CTRL); + + /* busy, i.e. configuration is not done, PCI access has to be retried */ + ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD); + wmb(); + /* BUS Master/IO/MEM access */ + ltq_pci_cfg_w32(ltq_pci_cfg_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD); + + /* enable external 2 PCI masters */ + temp_buffer = ltq_pci_r32(PCI_CR_PC_ARB); + temp_buffer &= (~(ltq_pci_req_mask << 16)); + /* enable internal arbiter */ + temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT); + /* enable internal PCI master reqest */ + temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS)); + + /* enable EBU request */ + temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS)); + + /* enable all external masters request */ + temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS)); + ltq_pci_w32(temp_buffer, PCI_CR_PC_ARB); + wmb(); + + /* setup BAR memory regions */ + ltq_pci_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0); + ltq_pci_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1); + ltq_pci_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2); + ltq_pci_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3); + ltq_pci_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4); + ltq_pci_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5); + ltq_pci_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6); + ltq_pci_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7); + ltq_pci_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg); + ltq_pci_w32(ltq_calc_bar11mask(), PCI_CR_BAR11MASK); + ltq_pci_w32(0, PCI_CR_PCI_ADDR_MAP11); + ltq_pci_w32(0, PCI_CS_BASE_ADDR1); + /* both TX and RX endian swap are enabled */ + ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI); + wmb(); + ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR12MASK) | 0x80000000, + PCI_CR_BAR12MASK); + ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR13MASK) | 0x80000000, + PCI_CR_BAR13MASK); + /*use 8 dw burst length */ + ltq_pci_w32(0x303, PCI_CR_FCI_BURST_LENGTH); + ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD); + wmb(); + + /* setup irq line */ + ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_CON) | 0xc, LTQ_EBU_PCC_CON); + ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN); + + /* toggle reset pin */ + __gpio_set_value(21, 0); + wmb(); + mdelay(1); + __gpio_set_value(21, 1); + return 0; +} + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + if (ltq_pci_irq_map[slot]) + return ltq_pci_irq_map[slot]; + printk(KERN_ERR "lq_pci: trying to map irq for unknown slot %d\n", + slot); + + return 0; +} + +static int __devinit ltq_pci_probe(struct platform_device *pdev) +{ + struct ltq_pci_data *ltq_pci_data = + (struct ltq_pci_data *) pdev->dev.platform_data; + pci_probe_only = 0; + ltq_pci_irq_map = ltq_pci_data->irq; + ltq_pci_membase = ioremap_nocache(PCI_CR_BASE_ADDR, PCI_CR_SIZE); + ltq_pci_mapped_cfg = + ioremap_nocache(LTQ_PCI_CFG_BASE, LTQ_PCI_CFG_BASE); + ltq_pci_controller.io_map_base = + (unsigned long)ioremap(LTQ_PCI_IO_BASE, LTQ_PCI_IO_SIZE - 1); + ltq_pci_startup(ltq_pci_data); + register_pci_controller(<q_pci_controller); + + return 0; +} + +static struct platform_driver +ltq_pci_driver = { + .probe = ltq_pci_probe, + .driver = { + .name = "ltq_pci", + .owner = THIS_MODULE, + }, +}; + +int __init pcibios_init(void) +{ + int ret = platform_driver_register(<q_pci_driver); + if (ret) + printk(KERN_INFO "ltq_pci: Error registering platfom driver!"); + return ret; +} + +arch_initcall(pcibios_init); diff --git a/arch/mips/pci/pci-lantiq.h b/arch/mips/pci/pci-lantiq.h new file mode 100644 index 0000000..66bf6cd --- /dev/null +++ b/arch/mips/pci/pci-lantiq.h @@ -0,0 +1,18 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright (C) 2010 John Crispin <blogic@openwrt.org> + */ + +#ifndef _LTQ_PCI_H__ +#define _LTQ_PCI_H__ + +extern __iomem void *ltq_pci_mapped_cfg; +extern int ltq_pci_read_config_dword(struct pci_bus *bus, + unsigned int devfn, int where, int size, u32 *val); +extern int ltq_pci_write_config_dword(struct pci_bus *bus, + unsigned int devfn, int where, int size, u32 val); + +#endif diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c new file mode 100644 index 0000000..38fece1 --- /dev/null +++ b/arch/mips/pci/pci-xlr.c @@ -0,0 +1,214 @@ +/* + * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights + * reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the NetLogic + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/console.h> + +#include <asm/io.h> + +#include <asm/netlogic/interrupt.h> +#include <asm/netlogic/xlr/iomap.h> +#include <asm/netlogic/xlr/pic.h> +#include <asm/netlogic/xlr/xlr.h> + +static void *pci_config_base; + +#define pci_cfg_addr(bus, devfn, off) (((bus) << 16) | ((devfn) << 8) | (off)) + +/* PCI ops */ +static inline u32 pci_cfg_read_32bit(struct pci_bus *bus, unsigned int devfn, + int where) +{ + u32 data; + u32 *cfgaddr; + + cfgaddr = (u32 *)(pci_config_base + + pci_cfg_addr(bus->number, devfn, where & ~3)); + data = *cfgaddr; + return cpu_to_le32(data); +} + +static inline void pci_cfg_write_32bit(struct pci_bus *bus, unsigned int devfn, + int where, u32 data) +{ + u32 *cfgaddr; + + cfgaddr = (u32 *)(pci_config_base + + pci_cfg_addr(bus->number, devfn, where & ~3)); + *cfgaddr = cpu_to_le32(data); +} + +static int nlm_pcibios_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + u32 data; + + if ((size == 2) && (where & 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + else if ((size == 4) && (where & 3)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + data = pci_cfg_read_32bit(bus, devfn, where); + + if (size == 1) + *val = (data >> ((where & 3) << 3)) & 0xff; + else if (size == 2) + *val = (data >> ((where & 3) << 3)) & 0xffff; + else + *val = data; + + return PCIBIOS_SUCCESSFUL; +} + + +static int nlm_pcibios_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + u32 data; + + if ((size == 2) && (where & 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + else if ((size == 4) && (where & 3)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + data = pci_cfg_read_32bit(bus, devfn, where); + + if (size == 1) + data = (data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + else if (size == 2) + data = (data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + else + data = val; + + pci_cfg_write_32bit(bus, devfn, where, data); + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops nlm_pci_ops = { + .read = nlm_pcibios_read, + .write = nlm_pcibios_write +}; + +static struct resource nlm_pci_mem_resource = { + .name = "XLR PCI MEM", + .start = 0xd0000000UL, /* 256MB PCI mem @ 0xd000_0000 */ + .end = 0xdfffffffUL, + .flags = IORESOURCE_MEM, +}; + +static struct resource nlm_pci_io_resource = { + .name = "XLR IO MEM", + .start = 0x10000000UL, /* 16MB PCI IO @ 0x1000_0000 */ + .end = 0x100fffffUL, + .flags = IORESOURCE_IO, +}; + +struct pci_controller nlm_pci_controller = { + .index = 0, + .pci_ops = &nlm_pci_ops, + .mem_resource = &nlm_pci_mem_resource, + .mem_offset = 0x00000000UL, + .io_resource = &nlm_pci_io_resource, + .io_offset = 0x00000000UL, +}; + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + if (!nlm_chip_is_xls()) + return PIC_PCIX_IRQ; /* for XLR just one IRQ*/ + + /* + * For XLS PCIe, there is an IRQ per Link, find out which + * link the device is on to assign interrupts + */ + if (dev->bus->self == NULL) + return 0; + + switch (dev->bus->self->devfn) { + case 0x0: + return PIC_PCIE_LINK0_IRQ; + case 0x8: + return PIC_PCIE_LINK1_IRQ; + case 0x10: + if (nlm_chip_is_xls_b()) + return PIC_PCIE_XLSB0_LINK2_IRQ; + else + return PIC_PCIE_LINK2_IRQ; + case 0x18: + if (nlm_chip_is_xls_b()) + return PIC_PCIE_XLSB0_LINK3_IRQ; + else + return PIC_PCIE_LINK3_IRQ; + } + WARN(1, "Unexpected devfn %d\n", dev->bus->self->devfn); + return 0; +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} + +static int __init pcibios_init(void) +{ + /* PSB assigns PCI resources */ + pci_probe_only = 1; + pci_config_base = ioremap(DEFAULT_PCI_CONFIG_BASE, 16 << 20); + + /* Extend IO port for memory mapped io */ + ioport_resource.start = 0; + ioport_resource.end = ~0; + + set_io_port_base(CKSEG1); + nlm_pci_controller.io_map_base = CKSEG1; + + pr_info("Registering XLR/XLS PCIX/PCIE Controller.\n"); + register_pci_controller(&nlm_pci_controller); + + return 0; +} + +arch_initcall(pcibios_init); + +struct pci_fixup pcibios_fixups[] = { + {0} +}; diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c b/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c index f9b9dcd..98fd009 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_irq_per.c @@ -97,7 +97,7 @@ static int msp_per_irq_set_affinity(struct irq_data *d, static struct irq_chip msp_per_irq_controller = { .name = "MSP_PER", - .irq_enable = unmask_per_irq. + .irq_enable = unmask_per_irq, .irq_disable = mask_per_irq, .irq_ack = msp_per_irq_ack, #ifdef CONFIG_SMP diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c index efc9e88..2608752 100644 --- a/arch/mips/pmc-sierra/yosemite/smp.c +++ b/arch/mips/pmc-sierra/yosemite/smp.c @@ -55,6 +55,8 @@ void titan_mailbox_irq(void) if (status & 0x2) smp_call_function_interrupt(); + if (status & 0x4) + scheduler_ipi(); break; case 1: @@ -63,6 +65,8 @@ void titan_mailbox_irq(void) if (status & 0x2) smp_call_function_interrupt(); + if (status & 0x4) + scheduler_ipi(); break; } } diff --git a/arch/mips/power/hibernate.S b/arch/mips/power/hibernate.S index dbb5c7b..f8a751c 100644 --- a/arch/mips/power/hibernate.S +++ b/arch/mips/power/hibernate.S @@ -35,7 +35,7 @@ LEAF(swsusp_arch_resume) 0: PTR_L t1, PBE_ADDRESS(t0) /* source */ PTR_L t2, PBE_ORIG_ADDRESS(t0) /* destination */ - PTR_ADDIU t3, t1, PAGE_SIZE + PTR_ADDU t3, t1, PAGE_SIZE 1: REG_L t8, (t1) REG_S t8, (t2) diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c index 37de05d..6c47dfe 100644 --- a/arch/mips/rb532/gpio.c +++ b/arch/mips/rb532/gpio.c @@ -185,7 +185,7 @@ int __init rb532_gpio_init(void) struct resource *r; r = rb532_gpio_reg0_res; - rb532_gpio_chip->regbase = ioremap_nocache(r->start, r->end - r->start); + rb532_gpio_chip->regbase = ioremap_nocache(r->start, resource_size(r)); if (!rb532_gpio_chip->regbase) { printk(KERN_ERR "rb532: cannot remap GPIO register 0\n"); diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c index deddbf0..698904d 100644 --- a/arch/mips/sgi-ip22/ip22-platform.c +++ b/arch/mips/sgi-ip22/ip22-platform.c @@ -132,7 +132,7 @@ static struct platform_device eth1_device = { */ static int __init sgiseeq_devinit(void) { - unsigned int tmp; + unsigned int pbdma __maybe_unused; int res, i; eth0_pd.hpc = hpc3c0; @@ -151,7 +151,7 @@ static int __init sgiseeq_devinit(void) /* Second HPC is missing? */ if (ip22_is_fullhouse() || - get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1])) + get_dbe(pbdma, (unsigned int *)&hpc3c1->pbdma[1])) return 0; sgimc->giopar |= SGIMC_GIOPAR_MASTEREXP1 | SGIMC_GIOPAR_EXP164 | diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c index 603fc91..1a94c98 100644 --- a/arch/mips/sgi-ip22/ip22-time.c +++ b/arch/mips/sgi-ip22/ip22-time.c @@ -32,7 +32,7 @@ static unsigned long dosample(void) { u32 ct0, ct1; - u8 msb, lsb; + u8 msb; /* Start the counter. */ sgint->tcword = (SGINT_TCWORD_CNT2 | SGINT_TCWORD_CALL | @@ -46,7 +46,7 @@ static unsigned long dosample(void) /* Latch and spin until top byte of counter2 is zero */ do { writeb(SGINT_TCWORD_CNT2 | SGINT_TCWORD_CLAT, &sgint->tcword); - lsb = readb(&sgint->tcnt2); + (void) readb(&sgint->tcnt2); msb = readb(&sgint->tcnt2); ct1 = read_c0_count(); } while (msb); diff --git a/arch/mips/sgi-ip27/ip27-hubio.c b/arch/mips/sgi-ip27/ip27-hubio.c index a1fa4ab..cd0d5b0 100644 --- a/arch/mips/sgi-ip27/ip27-hubio.c +++ b/arch/mips/sgi-ip27/ip27-hubio.c @@ -29,7 +29,6 @@ unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget, unsigned long xtalk_addr, size_t size) { nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode); - volatile hubreg_t junk; unsigned i; /* use small-window mapping if possible */ @@ -64,7 +63,7 @@ unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget, * after we write it. */ IIO_ITTE_PUT(nasid, i, HUB_PIO_MAP_TO_MEM, widget, xtalk_addr); - junk = HUB_L(IIO_ITTE_GET(nasid, i)); + (void) HUB_L(IIO_ITTE_GET(nasid, i)); return NODE_BWIN_BASE(nasid, widget) + (xtalk_addr % BWIN_SIZE); } diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c index 0a04603..b18b04e 100644 --- a/arch/mips/sgi-ip27/ip27-irq.c +++ b/arch/mips/sgi-ip27/ip27-irq.c @@ -147,8 +147,10 @@ static void ip27_do_irq_mask0(void) #ifdef CONFIG_SMP if (pend0 & (1UL << CPU_RESCHED_A_IRQ)) { LOCAL_HUB_CLR_INTR(CPU_RESCHED_A_IRQ); + scheduler_ipi(); } else if (pend0 & (1UL << CPU_RESCHED_B_IRQ)) { LOCAL_HUB_CLR_INTR(CPU_RESCHED_B_IRQ); + scheduler_ipi(); } else if (pend0 & (1UL << CPU_CALL_A_IRQ)) { LOCAL_HUB_CLR_INTR(CPU_CALL_A_IRQ); smp_call_function_interrupt(); diff --git a/arch/mips/sgi-ip27/ip27-klnuma.c b/arch/mips/sgi-ip27/ip27-klnuma.c index c3d30a8..1d1919a 100644 --- a/arch/mips/sgi-ip27/ip27-klnuma.c +++ b/arch/mips/sgi-ip27/ip27-klnuma.c @@ -54,11 +54,8 @@ void __init setup_replication_mask(void) static __init void set_ktext_source(nasid_t client_nasid, nasid_t server_nasid) { - cnodeid_t client_cnode; kern_vars_t *kvp; - client_cnode = NASID_TO_COMPACT_NODEID(client_nasid); - kvp = &hub_data(client_nasid)->kern_vars; KERN_VARS_ADDR(client_nasid) = (unsigned long)kvp; diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index a152538..ef74f32 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -66,18 +66,7 @@ static int rt_next_event(unsigned long delta, struct clock_event_device *evt) static void rt_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { - switch (mode) { - case CLOCK_EVT_MODE_ONESHOT: - /* The only mode supported */ - break; - - case CLOCK_EVT_MODE_PERIODIC: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_RESUME: - /* Nothing to do */ - break; - } + /* Nothing to do ... */ } int rt_timer_irq; @@ -174,8 +163,7 @@ static void __init hub_rt_clocksource_init(void) { struct clocksource *cs = &hub_rt_clocksource; - clocksource_set_clock(cs, CYCLES_PER_SEC); - clocksource_register(cs); + clocksource_register_hz(cs, CYCLES_PER_SEC); } void __init plat_time_init(void) diff --git a/arch/mips/sibyte/bcm1480/smp.c b/arch/mips/sibyte/bcm1480/smp.c index 47b347c..d667875 100644 --- a/arch/mips/sibyte/bcm1480/smp.c +++ b/arch/mips/sibyte/bcm1480/smp.c @@ -20,6 +20,7 @@ #include <linux/delay.h> #include <linux/smp.h> #include <linux/kernel_stat.h> +#include <linux/sched.h> #include <asm/mmu_context.h> #include <asm/io.h> @@ -189,10 +190,8 @@ void bcm1480_mailbox_interrupt(void) /* Clear the mailbox to clear the interrupt */ __raw_writeq(((u64)action)<<48, mailbox_0_clear_regs[cpu]); - /* - * Nothing to do for SMP_RESCHEDULE_YOURSELF; returning from the - * interrupt will do the reschedule for us - */ + if (action & SMP_RESCHEDULE_YOURSELF) + scheduler_ipi(); if (action & SMP_CALL_FUNCTION) smp_call_function_interrupt(); diff --git a/arch/mips/sibyte/sb1250/smp.c b/arch/mips/sibyte/sb1250/smp.c index c00a5cb..38e7f6b 100644 --- a/arch/mips/sibyte/sb1250/smp.c +++ b/arch/mips/sibyte/sb1250/smp.c @@ -21,6 +21,7 @@ #include <linux/interrupt.h> #include <linux/smp.h> #include <linux/kernel_stat.h> +#include <linux/sched.h> #include <asm/mmu_context.h> #include <asm/io.h> @@ -177,10 +178,8 @@ void sb1250_mailbox_interrupt(void) /* Clear the mailbox to clear the interrupt */ ____raw_writeq(((u64)action) << 48, mailbox_clear_regs[cpu]); - /* - * Nothing to do for SMP_RESCHEDULE_YOURSELF; returning from the - * interrupt will do the reschedule for us - */ + if (action & SMP_RESCHEDULE_YOURSELF) + scheduler_ipi(); if (action & SMP_CALL_FUNCTION) smp_call_function_interrupt(); diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c index c76151b..0904d4d 100644 --- a/arch/mips/sni/time.c +++ b/arch/mips/sni/time.c @@ -95,7 +95,7 @@ static void __init sni_a20r_timer_setup(void) static __init unsigned long dosample(void) { u32 ct0, ct1; - volatile u8 msb, lsb; + volatile u8 msb; /* Start the counter. */ outb_p(0x34, 0x43); @@ -108,7 +108,7 @@ static __init unsigned long dosample(void) /* Latch and spin until top byte of counter0 is zero */ do { outb(0x00, 0x43); - lsb = inb(0x40); + (void) inb(0x40); msb = inb(0x40); ct1 = read_c0_count(); } while (msb); diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c index 3dc19f4..e9f95dc 100644 --- a/arch/mips/txx9/generic/setup_tx4939.c +++ b/arch/mips/txx9/generic/setup_tx4939.c @@ -318,19 +318,15 @@ void __init tx4939_sio_init(unsigned int sclk, unsigned int cts_mask) } #if defined(CONFIG_TC35815) || defined(CONFIG_TC35815_MODULE) -static int tx4939_get_eth_speed(struct net_device *dev) +static u32 tx4939_get_eth_speed(struct net_device *dev) { - struct ethtool_cmd cmd = { ETHTOOL_GSET }; - int speed = 100; /* default 100Mbps */ - int err; - if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings) - return speed; - err = dev->ethtool_ops->get_settings(dev, &cmd); - if (err < 0) - return speed; - speed = cmd.speed == SPEED_100 ? 100 : 10; - return speed; + struct ethtool_cmd cmd; + if (dev_ethtool_get_settings(dev, &cmd)) + return 100; /* default 100Mbps */ + + return ethtool_cmd_speed(&cmd); } + static int tx4939_netdev_event(struct notifier_block *this, unsigned long event, void *ptr) @@ -343,8 +339,7 @@ static int tx4939_netdev_event(struct notifier_block *this, else if (dev->irq == TXX9_IRQ_BASE + TX4939_IR_ETH(1)) bit = TX4939_PCFG_SPEED1; if (bit) { - int speed = tx4939_get_eth_speed(dev); - if (speed == 100) + if (tx4939_get_eth_speed(dev) == 100) txx9_set64(&tx4939_ccfgptr->pcfg, bit); else txx9_clear64(&tx4939_ccfgptr->pcfg, bit); |
