summaryrefslogtreecommitdiffstats
path: root/arch/mips/sibyte/bcm1480/irq_handler.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/sibyte/bcm1480/irq_handler.S')
-rw-r--r--arch/mips/sibyte/bcm1480/irq_handler.S165
1 files changed, 165 insertions, 0 deletions
diff --git a/arch/mips/sibyte/bcm1480/irq_handler.S b/arch/mips/sibyte/bcm1480/irq_handler.S
new file mode 100644
index 0000000..408db88
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/irq_handler.S
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * bcm1480_irq_handler() is the routine that is actually called when an
+ * interrupt occurs. It is installed as the exception vector handler in
+ * init_IRQ() in arch/mips/sibyte/bcm1480/irq.c
+ *
+ * In the handle we figure out which interrupts need handling, and use that
+ * to call the dispatcher, which will take care of actually calling
+ * registered handlers
+ *
+ * Note that we take care of all raised interrupts in one go at the handler.
+ * This is more BSDish than the Indy code, and also, IMHO, more sane.
+ */
+#include <linux/config.h>
+
+#include <asm/addrspace.h>
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include <asm/sibyte/sb1250_defs.h>
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+
+/*
+ * What a pain. We have to be really careful saving the upper 32 bits of any
+ * register across function calls if we don't want them trashed--since were
+ * running in -o32, the calling routing never saves the full 64 bits of a
+ * register across a function call. Being the interrupt handler, we're
+ * guaranteed that interrupts are disabled during this code so we don't have
+ * to worry about random interrupts blasting the high 32 bits.
+ */
+
+ .text
+ .set push
+ .set noreorder
+ .set noat
+ .set mips64
+ #.set mips4
+ .align 5
+ NESTED(bcm1480_irq_handler, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+
+#ifdef CONFIG_SIBYTE_BCM1480_PROF
+ /* Set compare to count to silence count/compare timer interrupts */
+ mfc0 t1, CP0_COUNT
+ mtc0 t1, CP0_COMPARE /* pause to clear IP[7] bit of cause ? */
+#endif
+ /* Read cause */
+ mfc0 s0, CP0_CAUSE
+
+#ifdef CONFIG_SIBYTE_BCM1480_PROF
+ /* Cpu performance counter interrupt is routed to IP[7] */
+ andi t1, s0, CAUSEF_IP7
+ beqz t1, 0f
+ srl t1, s0, (CAUSEB_BD-2) /* Shift BD bit to bit 2 */
+ and t1, t1, 0x4 /* mask to get just BD bit */
+#ifdef CONFIG_MIPS64
+ dmfc0 a0, CP0_EPC
+ daddu a0, a0, t1 /* a0 = EPC + (BD ? 4 : 0) */
+#else
+ mfc0 a0, CP0_EPC
+ addu a0, a0, t1 /* a0 = EPC + (BD ? 4 : 0) */
+#endif
+ jal sbprof_cpu_intr
+ nop
+ j ret_from_irq
+ nop
+0:
+#endif
+
+ /* Timer interrupt is routed to IP[4] */
+ andi t1, s0, CAUSEF_IP4
+ beqz t1, 1f
+ nop
+ jal bcm1480_timer_interrupt
+ move a0, sp /* Pass the registers along */
+ j ret_from_irq
+ nop /* delay slot */
+1:
+
+#ifdef CONFIG_SMP
+ /* Mailbox interrupt is routed to IP[3] */
+ andi t1, s0, CAUSEF_IP3
+ beqz t1, 2f
+ nop
+ jal bcm1480_mailbox_interrupt
+ move a0, sp
+ j ret_from_irq
+ nop /* delay slot */
+2:
+#endif
+
+#ifdef CONFIG_KGDB
+ /* KGDB (uart 1) interrupt is routed to IP[6] */
+ andi t1, s0, CAUSEF_IP6
+ beqz t1, 3f
+ nop /* delay slot */
+ jal bcm1480_kgdb_interrupt
+ move a0, sp
+ j ret_from_irq
+ nop /* delay slot */
+3:
+#endif
+
+ and t1, s0, CAUSEF_IP2
+ beqz t1, 9f
+ nop
+
+ /*
+ * Default...we've hit an IP[2] interrupt, which means we've got
+ * to check the 1480 interrupt registers to figure out what to do
+ * Need to detect which CPU we're on, now that smp_affinity is
+ * supported.
+ */
+ PTR_LA v0, CKSEG1 + A_BCM1480_IMR_CPU0_BASE
+#ifdef CONFIG_SMP
+ lw t1, TI_CPU($28)
+ sll t1, t1, BCM1480_IMR_REGISTER_SPACING_SHIFT
+ addu v0, v0, t1
+#endif
+
+ /* Read IP[2] status (get both high and low halves of status) */
+ ld s0, R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H(v0)
+ ld s1, R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L(v0)
+
+ move s2, zero /* intr number */
+ li s3, 64
+
+ beqz s0, 9f /* No interrupts. Return. */
+ move a1, sp
+
+ xori s4, s0, 1 /* if s0 (_H) == 1, it's a low intr, so... */
+ movz s2, s3, s4 /* start the intr number at 64, and */
+ movz s0, s1, s4 /* look at the low status value. */
+
+ dclz s1, s0 /* Find the next interrupt. */
+ dsubu a0, zero, s1
+ daddiu a0, a0, 63
+ jal do_IRQ
+ daddu a0, a0, s2
+
+9: j ret_from_irq
+ nop
+
+ .set pop
+ END(bcm1480_irq_handler)
OpenPOWER on IntegriCloud