16 files changed, 463 insertions, 59 deletions

diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index e9bc8c9..813826a 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -12,6 +12,11 @@ config RALINK_ILL_ACC
 	depends on SOC_RT305X
 	default y
 
+config IRQ_INTC
+	bool
+	default y
+	depends on !SOC_MT7621
+
 choice
 	prompt "Ralink SoC selection"
 	default SOC_RT305X
@@ -33,7 +38,18 @@ choice
 
 	config SOC_MT7620
 		bool "MT7620/8"
+		select HW_HAS_PCI
 
+	config SOC_MT7621
+		bool "MT7621"
+		select MIPS_CPU_SCACHE
+		select SYS_SUPPORTS_MULTITHREADING
+		select SYS_SUPPORTS_SMP
+		select SYS_SUPPORTS_MIPS_CPS
+		select MIPS_GIC
+		select COMMON_CLK
+		select CLKSRC_MIPS_GIC
+		select HW_HAS_PCI
 endchoice
 
 choice
diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
index a6c9d00..0d1795a 100644
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -6,16 +6,24 @@
 # Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
 # Copyright (C) 2013 John Crispin <blogic@openwrt.org>
 
-obj-y := prom.o of.o reset.o clk.o irq.o timer.o
+obj-y := prom.o of.o reset.o
+
+ifndef CONFIG_MIPS_GIC
+	obj-y += clk.o timer.o
+endif
 
 obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o
 
 obj-$(CONFIG_RALINK_ILL_ACC) += ill_acc.o
 
+obj-$(CONFIG_IRQ_INTC) += irq.o
+obj-$(CONFIG_MIPS_GIC) += irq-gic.o timer-gic.o
+
 obj-$(CONFIG_SOC_RT288X) += rt288x.o
 obj-$(CONFIG_SOC_RT305X) += rt305x.o
 obj-$(CONFIG_SOC_RT3883) += rt3883.o
 obj-$(CONFIG_SOC_MT7620) += mt7620.o
+obj-$(CONFIG_SOC_MT7621) += mt7621.o
 
 obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
 
diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
index 6d9c8c4..6095fcc 100644
--- a/arch/mips/ralink/Platform
+++ b/arch/mips/ralink/Platform
@@ -27,3 +27,8 @@ cflags-$(CONFIG_SOC_RT3883)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/rt
 #
 load-$(CONFIG_SOC_MT7620)	+= 0xffffffff80000000
 cflags-$(CONFIG_SOC_MT7620)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7620
+
+# Ralink MT7621
+#
+load-$(CONFIG_SOC_MT7621)	+= 0xffffffff80001000
+cflags-$(CONFIG_SOC_MT7621)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7621
diff --git a/arch/mips/ralink/cevt-rt3352.c b/arch/mips/ralink/cevt-rt3352.c
index a8e70a9..e46f91f 100644
--- a/arch/mips/ralink/cevt-rt3352.c
+++ b/arch/mips/ralink/cevt-rt3352.c
@@ -48,7 +48,7 @@ static int systick_next_event(unsigned long delta,
 	sdev = container_of(evt, struct systick_device, dev);
 	count = ioread32(sdev->membase + SYSTICK_COUNT);
 	count = (count + delta) % SYSTICK_FREQ;
-	iowrite32(count + delta, sdev->membase + SYSTICK_COMPARE);
+	iowrite32(count, sdev->membase + SYSTICK_COMPARE);
 
 	return 0;
 }
diff --git a/arch/mips/ralink/clk.c b/arch/mips/ralink/clk.c
index feb5a9b..25c4a61 100644
--- a/arch/mips/ralink/clk.c
+++ b/arch/mips/ralink/clk.c
@@ -75,5 +75,5 @@ void __init plat_time_init(void)
 	pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000);
 	mips_hpt_frequency = clk_get_rate(clk) / 2;
 	clk_put(clk);
-	clocksource_of_init();
+	clocksource_probe();
 }
diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c
index 255d695..3c59ffe 100644
--- a/arch/mips/ralink/early_printk.c
+++ b/arch/mips/ralink/early_printk.c
@@ -25,11 +25,13 @@
 #define MT7628_CHIP_NAME1	0x20203832
 
 #define UART_REG_TX		0x04
+#define UART_REG_LCR		0x0c
 #define UART_REG_LSR		0x14
 #define UART_REG_LSR_RT2880	0x1c
 
 static __iomem void *uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE);
 static __iomem void *chipid_membase = (__iomem void *) KSEG1ADDR(CHIPID_BASE);
+static int init_complete;
 
 static inline void uart_w32(u32 val, unsigned reg)
 {
@@ -47,8 +49,32 @@ static inline int soc_is_mt7628(void)
 		(__raw_readl(chipid_membase) == MT7628_CHIP_NAME1);
 }
 
+static void find_uart_base(void)
+{
+	int i;
+
+	if (!soc_is_mt7628())
+		return;
+
+	for (i = 0; i < 3; i++) {
+		u32 reg = uart_r32(UART_REG_LCR + (0x100 * i));
+
+		if (!reg)
+			continue;
+
+		uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE +
+							  (0x100 * i));
+		break;
+	}
+}
+
 void prom_putchar(unsigned char ch)
 {
+	if (!init_complete) {
+		find_uart_base();
+		init_complete = 1;
+	}
+
 	if (IS_ENABLED(CONFIG_SOC_MT7621) || soc_is_mt7628()) {
 		uart_w32(ch, UART_TX);
 		while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
diff --git a/arch/mips/ralink/irq-gic.c b/arch/mips/ralink/irq-gic.c
new file mode 100644
index 0000000..50d6c55
--- /dev/null
+++ b/arch/mips/ralink/irq-gic.c
@@ -0,0 +1,25 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2015 Nikolay Martynov <mar.kolya@gmail.com>
+ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+
+#include <linux/of.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/mips-gic.h>
+
+int get_c0_perfcount_int(void)
+{
+	return gic_get_c0_perfcount_int();
+}
+EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
+
+void __init arch_init_irq(void)
+{
+	irqchip_init();
+}
diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
index 2ea5ff6..0d3d1a9 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -37,8 +37,17 @@
 #define PMU1_CFG		0x8C
 #define DIG_SW_SEL		BIT(25)
 
-/* is this a MT7620 or a MT7628 */
-enum mt762x_soc_type mt762x_soc;
+/* clock scaling */
+#define CLKCFG_FDIV_MASK	0x1f00
+#define CLKCFG_FDIV_USB_VAL	0x0300
+#define CLKCFG_FFRAC_MASK	0x001f
+#define CLKCFG_FFRAC_USB_VAL	0x0003
+
+/* EFUSE bits */
+#define EFUSE_MT7688		0x100000
+
+/* DRAM type bit */
+#define DRAM_TYPE_MT7628_MASK	0x1
 
 /* does the board have sdram or ddram */
 static int dram_type;
@@ -98,31 +107,31 @@ static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
 };
 
 static struct rt2880_pmx_func pwm1_grp_mt7628[] = {
-	FUNC("sdcx", 3, 19, 1),
+	FUNC("sdxc d6", 3, 19, 1),
 	FUNC("utif", 2, 19, 1),
 	FUNC("gpio", 1, 19, 1),
-	FUNC("pwm", 0, 19, 1),
+	FUNC("pwm1", 0, 19, 1),
 };
 
 static struct rt2880_pmx_func pwm0_grp_mt7628[] = {
-	FUNC("sdcx", 3, 18, 1),
+	FUNC("sdxc d7", 3, 18, 1),
 	FUNC("utif", 2, 18, 1),
 	FUNC("gpio", 1, 18, 1),
-	FUNC("pwm", 0, 18, 1),
+	FUNC("pwm0", 0, 18, 1),
 };
 
 static struct rt2880_pmx_func uart2_grp_mt7628[] = {
-	FUNC("sdcx", 3, 20, 2),
+	FUNC("sdxc d5 d4", 3, 20, 2),
 	FUNC("pwm", 2, 20, 2),
 	FUNC("gpio", 1, 20, 2),
-	FUNC("uart", 0, 20, 2),
+	FUNC("uart2", 0, 20, 2),
 };
 
 static struct rt2880_pmx_func uart1_grp_mt7628[] = {
-	FUNC("sdcx", 3, 45, 2),
+	FUNC("sw_r", 3, 45, 2),
 	FUNC("pwm", 2, 45, 2),
 	FUNC("gpio", 1, 45, 2),
-	FUNC("uart", 0, 45, 2),
+	FUNC("uart1", 0, 45, 2),
 };
 
 static struct rt2880_pmx_func i2c_grp_mt7628[] = {
@@ -134,21 +143,21 @@ static struct rt2880_pmx_func i2c_grp_mt7628[] = {
 
 static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 36, 1) };
 static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 37, 1) };
-static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 15, 38) };
+static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 38, 1) };
 static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) };
 
 static struct rt2880_pmx_func sd_mode_grp_mt7628[] = {
 	FUNC("jtag", 3, 22, 8),
 	FUNC("utif", 2, 22, 8),
 	FUNC("gpio", 1, 22, 8),
-	FUNC("sdcx", 0, 22, 8),
+	FUNC("sdxc", 0, 22, 8),
 };
 
 static struct rt2880_pmx_func uart0_grp_mt7628[] = {
 	FUNC("-", 3, 12, 2),
 	FUNC("-", 2, 12, 2),
 	FUNC("gpio", 1, 12, 2),
-	FUNC("uart", 0, 12, 2),
+	FUNC("uart0", 0, 12, 2),
 };
 
 static struct rt2880_pmx_func i2s_grp_mt7628[] = {
@@ -162,7 +171,7 @@ static struct rt2880_pmx_func spi_cs1_grp_mt7628[] = {
 	FUNC("-", 3, 6, 1),
 	FUNC("refclk", 2, 6, 1),
 	FUNC("gpio", 1, 6, 1),
-	FUNC("spi", 0, 6, 1),
+	FUNC("spi cs1", 0, 6, 1),
 };
 
 static struct rt2880_pmx_func spis_grp_mt7628[] = {
@@ -179,28 +188,44 @@ static struct rt2880_pmx_func gpio_grp_mt7628[] = {
 	FUNC("gpio", 0, 11, 1),
 };
 
-#define MT7628_GPIO_MODE_MASK	0x3
-
-#define MT7628_GPIO_MODE_PWM1	30
-#define MT7628_GPIO_MODE_PWM0	28
-#define MT7628_GPIO_MODE_UART2	26
-#define MT7628_GPIO_MODE_UART1	24
-#define MT7628_GPIO_MODE_I2C	20
-#define MT7628_GPIO_MODE_REFCLK	18
-#define MT7628_GPIO_MODE_PERST	16
-#define MT7628_GPIO_MODE_WDT	14
-#define MT7628_GPIO_MODE_SPI	12
-#define MT7628_GPIO_MODE_SDMODE	10
-#define MT7628_GPIO_MODE_UART0	8
-#define MT7628_GPIO_MODE_I2S	6
-#define MT7628_GPIO_MODE_CS1	4
-#define MT7628_GPIO_MODE_SPIS	2
-#define MT7628_GPIO_MODE_GPIO	0
+static struct rt2880_pmx_func wled_kn_grp_mt7628[] = {
+	FUNC("rsvd", 3, 35, 1),
+	FUNC("rsvd", 2, 35, 1),
+	FUNC("gpio", 1, 35, 1),
+	FUNC("wled_kn", 0, 35, 1),
+};
+
+static struct rt2880_pmx_func wled_an_grp_mt7628[] = {
+	FUNC("rsvd", 3, 35, 1),
+	FUNC("rsvd", 2, 35, 1),
+	FUNC("gpio", 1, 35, 1),
+	FUNC("wled_an", 0, 35, 1),
+};
+
+#define MT7628_GPIO_MODE_MASK		0x3
+
+#define MT7628_GPIO_MODE_WLED_KN	48
+#define MT7628_GPIO_MODE_WLED_AN	32
+#define MT7628_GPIO_MODE_PWM1		30
+#define MT7628_GPIO_MODE_PWM0		28
+#define MT7628_GPIO_MODE_UART2		26
+#define MT7628_GPIO_MODE_UART1		24
+#define MT7628_GPIO_MODE_I2C		20
+#define MT7628_GPIO_MODE_REFCLK		18
+#define MT7628_GPIO_MODE_PERST		16
+#define MT7628_GPIO_MODE_WDT		14
+#define MT7628_GPIO_MODE_SPI		12
+#define MT7628_GPIO_MODE_SDMODE		10
+#define MT7628_GPIO_MODE_UART0		8
+#define MT7628_GPIO_MODE_I2S		6
+#define MT7628_GPIO_MODE_CS1		4
+#define MT7628_GPIO_MODE_SPIS		2
+#define MT7628_GPIO_MODE_GPIO		0
 
 static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
 	GRP_G("pmw1", pwm1_grp_mt7628, MT7628_GPIO_MODE_MASK,
 				1, MT7628_GPIO_MODE_PWM1),
-	GRP_G("pmw1", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK,
+	GRP_G("pmw0", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK,
 				1, MT7628_GPIO_MODE_PWM0),
 	GRP_G("uart2", uart2_grp_mt7628, MT7628_GPIO_MODE_MASK,
 				1, MT7628_GPIO_MODE_UART2),
@@ -224,9 +249,19 @@ static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
 				1, MT7628_GPIO_MODE_SPIS),
 	GRP_G("gpio", gpio_grp_mt7628, MT7628_GPIO_MODE_MASK,
 				1, MT7628_GPIO_MODE_GPIO),
+	GRP_G("wled_an", wled_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
+				1, MT7628_GPIO_MODE_WLED_AN),
+	GRP_G("wled_kn", wled_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
+				1, MT7628_GPIO_MODE_WLED_KN),
 	{ 0 }
 };
 
+static inline int is_mt76x8(void)
+{
+	return ralink_soc == MT762X_SOC_MT7628AN ||
+	       ralink_soc == MT762X_SOC_MT7688;
+}
+
 static __init u32
 mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div)
 {
@@ -381,7 +416,7 @@ void __init ralink_clk_init(void)
 #define RINT(x)		((x) / 1000000)
 #define RFRAC(x)	(((x) / 1000) % 1000)
 
-	if (mt762x_soc == MT762X_SOC_MT7628AN) {
+	if (is_mt76x8()) {
 		if (xtal_rate == MHZ(40))
 			cpu_rate = MHZ(580);
 		else
@@ -421,8 +456,25 @@ void __init ralink_clk_init(void)
 	ralink_clk_add("10000100.timer", periph_rate);
 	ralink_clk_add("10000120.watchdog", periph_rate);
 	ralink_clk_add("10000b00.spi", sys_rate);
+	ralink_clk_add("10000b40.spi", sys_rate);
 	ralink_clk_add("10000c00.uartlite", periph_rate);
+	ralink_clk_add("10000d00.uart1", periph_rate);
+	ralink_clk_add("10000e00.uart2", periph_rate);
 	ralink_clk_add("10180000.wmac", xtal_rate);
+
+	if (IS_ENABLED(CONFIG_USB) && !is_mt76x8()) {
+		/*
+		 * When the CPU goes into sleep mode, the BUS clock will be
+		 * too low for USB to function properly. Adjust the busses
+		 * fractional divider to fix this
+		 */
+		u32 val = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
+
+		val &= ~(CLKCFG_FDIV_MASK | CLKCFG_FFRAC_MASK);
+		val |= CLKCFG_FDIV_USB_VAL | CLKCFG_FFRAC_USB_VAL;
+
+		rt_sysc_w32(val, SYSC_REG_CPU_SYS_CLKCFG);
+	}
 }
 
 void __init ralink_of_remap(void)
@@ -499,36 +551,44 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 
 	if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) {
 		if (bga) {
-			mt762x_soc = MT762X_SOC_MT7620A;
+			ralink_soc = MT762X_SOC_MT7620A;
 			name = "MT7620A";
 			soc_info->compatible = "ralink,mt7620a-soc";
 		} else {
-			mt762x_soc = MT762X_SOC_MT7620N;
+			ralink_soc = MT762X_SOC_MT7620N;
 			name = "MT7620N";
 			soc_info->compatible = "ralink,mt7620n-soc";
-#ifdef CONFIG_PCI
-			panic("mt7620n is only supported for non pci kernels");
-#endif
 		}
 	} else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) {
-		mt762x_soc = MT762X_SOC_MT7628AN;
-		name = "MT7628AN";
+		u32 efuse = __raw_readl(sysc + SYSC_REG_EFUSE_CFG);
+
+		if (efuse & EFUSE_MT7688) {
+			ralink_soc = MT762X_SOC_MT7688;
+			name = "MT7688";
+		} else {
+			ralink_soc = MT762X_SOC_MT7628AN;
+			name = "MT7628AN";
+		}
 		soc_info->compatible = "ralink,mt7628an-soc";
 	} else {
 		panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
 	}
 
 	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
-		"Ralink %s ver:%u eco:%u",
+		"MediaTek %s ver:%u eco:%u",
 		name,
 		(rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
 		(rev & CHIP_REV_ECO_MASK));
 
 	cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
-	dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
+	if (is_mt76x8())
+		dram_type = cfg0 & DRAM_TYPE_MT7628_MASK;
+	else
+		dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) &
+			    SYSCFG0_DRAM_TYPE_MASK;
 
 	soc_info->mem_base = MT7620_DRAM_BASE;
-	if (mt762x_soc == MT762X_SOC_MT7628AN)
+	if (is_mt76x8())
 		mt7628_dram_init(soc_info);
 	else
 		mt7620_dram_init(soc_info);
@@ -541,7 +601,7 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 	pr_info("Digital PMU set to %s control\n",
 		(pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
 
-	if (mt762x_soc == MT762X_SOC_MT7628AN)
+	if (is_mt76x8())
 		rt2880_pinmux_data = mt7628an_pinmux_data;
 	else
 		rt2880_pinmux_data = mt7620a_pinmux_data;
diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c
new file mode 100644
index 0000000..e9b9fa3
--- /dev/null
+++ b/arch/mips/ralink/mt7621.c
@@ -0,0 +1,226 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2015 Nikolay Martynov <mar.kolya@gmail.com>
+ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mipsregs.h>
+#include <asm/smp-ops.h>
+#include <asm/mips-cm.h>
+#include <asm/mips-cpc.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/mt7621.h>
+
+#include <pinmux.h>
+
+#include "common.h"
+
+#define SYSC_REG_SYSCFG		0x10
+#define SYSC_REG_CPLL_CLKCFG0	0x2c
+#define SYSC_REG_CUR_CLK_STS	0x44
+#define CPU_CLK_SEL		(BIT(30) | BIT(31))
+
+#define MT7621_GPIO_MODE_UART1		1
+#define MT7621_GPIO_MODE_I2C		2
+#define MT7621_GPIO_MODE_UART3_MASK	0x3
+#define MT7621_GPIO_MODE_UART3_SHIFT	3
+#define MT7621_GPIO_MODE_UART3_GPIO	1
+#define MT7621_GPIO_MODE_UART2_MASK	0x3
+#define MT7621_GPIO_MODE_UART2_SHIFT	5
+#define MT7621_GPIO_MODE_UART2_GPIO	1
+#define MT7621_GPIO_MODE_JTAG		7
+#define MT7621_GPIO_MODE_WDT_MASK	0x3
+#define MT7621_GPIO_MODE_WDT_SHIFT	8
+#define MT7621_GPIO_MODE_WDT_GPIO	1
+#define MT7621_GPIO_MODE_PCIE_RST	0
+#define MT7621_GPIO_MODE_PCIE_REF	2
+#define MT7621_GPIO_MODE_PCIE_MASK	0x3
+#define MT7621_GPIO_MODE_PCIE_SHIFT	10
+#define MT7621_GPIO_MODE_PCIE_GPIO	1
+#define MT7621_GPIO_MODE_MDIO_MASK	0x3
+#define MT7621_GPIO_MODE_MDIO_SHIFT	12
+#define MT7621_GPIO_MODE_MDIO_GPIO	1
+#define MT7621_GPIO_MODE_RGMII1		14
+#define MT7621_GPIO_MODE_RGMII2		15
+#define MT7621_GPIO_MODE_SPI_MASK	0x3
+#define MT7621_GPIO_MODE_SPI_SHIFT	16
+#define MT7621_GPIO_MODE_SPI_GPIO	1
+#define MT7621_GPIO_MODE_SDHCI_MASK	0x3
+#define MT7621_GPIO_MODE_SDHCI_SHIFT	18
+#define MT7621_GPIO_MODE_SDHCI_GPIO	1
+
+static struct rt2880_pmx_func uart1_grp[] =  { FUNC("uart1", 0, 1, 2) };
+static struct rt2880_pmx_func i2c_grp[] =  { FUNC("i2c", 0, 3, 2) };
+static struct rt2880_pmx_func uart3_grp[] = {
+	FUNC("uart3", 0, 5, 4),
+	FUNC("i2s", 2, 5, 4),
+	FUNC("spdif3", 3, 5, 4),
+};
+static struct rt2880_pmx_func uart2_grp[] = {
+	FUNC("uart2", 0, 9, 4),
+	FUNC("pcm", 2, 9, 4),
+	FUNC("spdif2", 3, 9, 4),
+};
+static struct rt2880_pmx_func jtag_grp[] = { FUNC("jtag", 0, 13, 5) };
+static struct rt2880_pmx_func wdt_grp[] = {
+	FUNC("wdt rst", 0, 18, 1),
+	FUNC("wdt refclk", 2, 18, 1),
+};
+static struct rt2880_pmx_func pcie_rst_grp[] = {
+	FUNC("pcie rst", MT7621_GPIO_MODE_PCIE_RST, 19, 1),
+	FUNC("pcie refclk", MT7621_GPIO_MODE_PCIE_REF, 19, 1)
+};
+static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 20, 2) };
+static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 22, 12) };
+static struct rt2880_pmx_func spi_grp[] = {
+	FUNC("spi", 0, 34, 7),
+	FUNC("nand1", 2, 34, 7),
+};
+static struct rt2880_pmx_func sdhci_grp[] = {
+	FUNC("sdhci", 0, 41, 8),
+	FUNC("nand2", 2, 41, 8),
+};
+static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 49, 12) };
+
+static struct rt2880_pmx_group mt7621_pinmux_data[] = {
+	GRP("uart1", uart1_grp, 1, MT7621_GPIO_MODE_UART1),
+	GRP("i2c", i2c_grp, 1, MT7621_GPIO_MODE_I2C),
+	GRP_G("uart3", uart3_grp, MT7621_GPIO_MODE_UART3_MASK,
+		MT7621_GPIO_MODE_UART3_GPIO, MT7621_GPIO_MODE_UART3_SHIFT),
+	GRP_G("uart2", uart2_grp, MT7621_GPIO_MODE_UART2_MASK,
+		MT7621_GPIO_MODE_UART2_GPIO, MT7621_GPIO_MODE_UART2_SHIFT),
+	GRP("jtag", jtag_grp, 1, MT7621_GPIO_MODE_JTAG),
+	GRP_G("wdt", wdt_grp, MT7621_GPIO_MODE_WDT_MASK,
+		MT7621_GPIO_MODE_WDT_GPIO, MT7621_GPIO_MODE_WDT_SHIFT),
+	GRP_G("pcie", pcie_rst_grp, MT7621_GPIO_MODE_PCIE_MASK,
+		MT7621_GPIO_MODE_PCIE_GPIO, MT7621_GPIO_MODE_PCIE_SHIFT),
+	GRP_G("mdio", mdio_grp, MT7621_GPIO_MODE_MDIO_MASK,
+		MT7621_GPIO_MODE_MDIO_GPIO, MT7621_GPIO_MODE_MDIO_SHIFT),
+	GRP("rgmii2", rgmii2_grp, 1, MT7621_GPIO_MODE_RGMII2),
+	GRP_G("spi", spi_grp, MT7621_GPIO_MODE_SPI_MASK,
+		MT7621_GPIO_MODE_SPI_GPIO, MT7621_GPIO_MODE_SPI_SHIFT),
+	GRP_G("sdhci", sdhci_grp, MT7621_GPIO_MODE_SDHCI_MASK,
+		MT7621_GPIO_MODE_SDHCI_GPIO, MT7621_GPIO_MODE_SDHCI_SHIFT),
+	GRP("rgmii1", rgmii1_grp, 1, MT7621_GPIO_MODE_RGMII1),
+	{ 0 }
+};
+
+phys_addr_t mips_cpc_default_phys_base(void)
+{
+	panic("Cannot detect cpc address");
+}
+
+void __init ralink_clk_init(void)
+{
+	int cpu_fdiv = 0;
+	int cpu_ffrac = 0;
+	int fbdiv = 0;
+	u32 clk_sts, syscfg;
+	u8 clk_sel = 0, xtal_mode;
+	u32 cpu_clk;
+
+	if ((rt_sysc_r32(SYSC_REG_CPLL_CLKCFG0) & CPU_CLK_SEL) != 0)
+		clk_sel = 1;
+
+	switch (clk_sel) {
+	case 0:
+		clk_sts = rt_sysc_r32(SYSC_REG_CUR_CLK_STS);
+		cpu_fdiv = ((clk_sts >> 8) & 0x1F);
+		cpu_ffrac = (clk_sts & 0x1F);
+		cpu_clk = (500 * cpu_ffrac / cpu_fdiv) * 1000 * 1000;
+		break;
+
+	case 1:
+		fbdiv = ((rt_sysc_r32(0x648) >> 4) & 0x7F) + 1;
+		syscfg = rt_sysc_r32(SYSC_REG_SYSCFG);
+		xtal_mode = (syscfg >> 6) & 0x7;
+		if (xtal_mode >= 6) {
+			/* 25Mhz Xtal */
+			cpu_clk = 25 * fbdiv * 1000 * 1000;
+		} else if (xtal_mode >= 3) {
+			/* 40Mhz Xtal */
+			cpu_clk = 40 * fbdiv * 1000 * 1000;
+		} else {
+			/* 20Mhz Xtal */
+			cpu_clk = 20 * fbdiv * 1000 * 1000;
+		}
+		break;
+	}
+}
+
+void __init ralink_of_remap(void)
+{
+	rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc");
+	rt_memc_membase = plat_of_remap_node("mtk,mt7621-memc");
+
+	if (!rt_sysc_membase || !rt_memc_membase)
+		panic("Failed to remap core resources");
+}
+
+void prom_soc_init(struct ralink_soc_info *soc_info)
+{
+	void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE);
+	unsigned char *name = NULL;
+	u32 n0;
+	u32 n1;
+	u32 rev;
+
+	n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
+	n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+
+	if (n0 == MT7621_CHIP_NAME0 && n1 == MT7621_CHIP_NAME1) {
+		name = "MT7621";
+		soc_info->compatible = "mtk,mt7621-soc";
+	} else {
+		panic("mt7621: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+	}
+
+	rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
+
+	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+		"MediaTek %s ver:%u eco:%u",
+		name,
+		(rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
+		(rev & CHIP_REV_ECO_MASK));
+
+	soc_info->mem_size_min = MT7621_DDR2_SIZE_MIN;
+	soc_info->mem_size_max = MT7621_DDR2_SIZE_MAX;
+	soc_info->mem_base = MT7621_DRAM_BASE;
+
+	rt2880_pinmux_data = mt7621_pinmux_data;
+
+	/* Early detection of CMP support */
+	mips_cm_probe();
+	mips_cpc_probe();
+
+	if (mips_cm_numiocu()) {
+		/*
+		 * mips_cm_probe() wipes out bootloader
+		 * config for CM regions and we have to configure them
+		 * again. This SoC cannot talk to pamlbus devices
+		 * witout proper iocu region set up.
+		 *
+		 * FIXME: it would be better to do this with values
+		 * from DT, but we need this very early because
+		 * without this we cannot talk to pretty much anything
+		 * including serial.
+		 */
+		write_gcr_reg0_base(MT7621_PALMBUS_BASE);
+		write_gcr_reg0_mask(~MT7621_PALMBUS_SIZE |
+				    CM_GCR_REGn_MASK_CMTGT_IOCU0);
+	}
+
+	if (!register_cps_smp_ops())
+		return;
+	if (!register_cmp_smp_ops())
+		return;
+	if (!register_vsmp_smp_ops())
+		return;
+}
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
index 0d30dcd..f9eda5d 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -74,8 +74,6 @@ void __init plat_mem_setup(void)
 	 */
 	__dt_setup_arch(__dtb_start);
 
-	strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
-
 	of_scan_flat_dt(early_init_dt_find_memory, NULL);
 	if (memory_dtb)
 		of_scan_flat_dt(early_init_dt_scan_memory, NULL);
diff --git a/arch/mips/ralink/prom.c b/arch/mips/ralink/prom.c
index 09419f6..39a9142f 100644
--- a/arch/mips/ralink/prom.c
+++ b/arch/mips/ralink/prom.c
@@ -15,11 +15,16 @@
 #include <asm/bootinfo.h>
 #include <asm/addrspace.h>
 
+#include <asm/mach-ralink/ralink_regs.h>
+
 #include "common.h"
 
 struct ralink_soc_info soc_info;
 struct rt2880_pmx_group *rt2880_pinmux_data = NULL;
 
+enum ralink_soc_type ralink_soc;
+EXPORT_SYMBOL_GPL(ralink_soc);
+
 const char *get_system_type(void)
 {
 	return soc_info.sys_type;
diff --git a/arch/mips/ralink/reset.c b/arch/mips/ralink/reset.c
index 55c7ec5..ee117c4 100644
--- a/arch/mips/ralink/reset.c
+++ b/arch/mips/ralink/reset.c
@@ -11,6 +11,7 @@
 #include <linux/pm.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/delay.h>
 #include <linux/reset-controller.h>
 
 #include <asm/reboot.h>
@@ -18,8 +19,10 @@
 #include <asm/mach-ralink/ralink_regs.h>
 
 /* Reset Control */
-#define SYSC_REG_RESET_CTRL     0x034
-#define RSTCTL_RESET_SYSTEM     BIT(0)
+#define SYSC_REG_RESET_CTRL	0x034
+
+#define RSTCTL_RESET_PCI	BIT(26)
+#define RSTCTL_RESET_SYSTEM	BIT(0)
 
 static int ralink_assert_device(struct reset_controller_dev *rcdev,
 				unsigned long id)
@@ -83,6 +86,11 @@ void ralink_rst_init(void)
 
 static void ralink_restart(char *command)
 {
+	if (IS_ENABLED(CONFIG_PCI)) {
+		rt_sysc_m32(0, RSTCTL_RESET_PCI, SYSC_REG_RESET_CTRL);
+		mdelay(50);
+	}
+
 	local_irq_disable();
 	rt_sysc_w32(RSTCTL_RESET_SYSTEM, SYSC_REG_RESET_CTRL);
 	unreachable();
@@ -98,7 +106,6 @@ static int __init mips_reboot_setup(void)
 {
 	_machine_restart = ralink_restart;
 	_machine_halt = ralink_halt;
-	pm_power_off = ralink_halt;
 
 	return 0;
 }
diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c
index 738cec8..3c84166 100644
--- a/arch/mips/ralink/rt288x.c
+++ b/arch/mips/ralink/rt288x.c
@@ -119,4 +119,5 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 	soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
 
 	rt2880_pinmux_data = rt2880_pinmux_data_act;
+	ralink_soc = RT2880_SOC;
 }
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
index c40776a..d7c4ba4 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -21,8 +21,6 @@
 
 #include "common.h"
 
-enum rt305x_soc_type rt305x_soc;
-
 static struct rt2880_pmx_func i2c_func[] =  { FUNC("i2c", 0, 1, 2) };
 static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
 static struct rt2880_pmx_func uartf_func[] = {
@@ -201,7 +199,9 @@ void __init ralink_clk_init(void)
 	}
 
 	ralink_clk_add("cpu", cpu_rate);
+	ralink_clk_add("sys", sys_rate);
 	ralink_clk_add("10000b00.spi", sys_rate);
+	ralink_clk_add("10000b40.spi", sys_rate);
 	ralink_clk_add("10000100.timer", wdt_rate);
 	ralink_clk_add("10000120.watchdog", wdt_rate);
 	ralink_clk_add("10000500.uart", uart_rate);
@@ -235,24 +235,24 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 
 		icache_sets = (read_c0_config1() >> 22) & 7;
 		if (icache_sets == 1) {
-			rt305x_soc = RT305X_SOC_RT3050;
+			ralink_soc = RT305X_SOC_RT3050;
 			name = "RT3050";
 			soc_info->compatible = "ralink,rt3050-soc";
 		} else {
-			rt305x_soc = RT305X_SOC_RT3052;
+			ralink_soc = RT305X_SOC_RT3052;
 			name = "RT3052";
 			soc_info->compatible = "ralink,rt3052-soc";
 		}
 	} else if (n0 == RT3350_CHIP_NAME0 && n1 == RT3350_CHIP_NAME1) {
-		rt305x_soc = RT305X_SOC_RT3350;
+		ralink_soc = RT305X_SOC_RT3350;
 		name = "RT3350";
 		soc_info->compatible = "ralink,rt3350-soc";
 	} else if (n0 == RT3352_CHIP_NAME0 && n1 == RT3352_CHIP_NAME1) {
-		rt305x_soc = RT305X_SOC_RT3352;
+		ralink_soc = RT305X_SOC_RT3352;
 		name = "RT3352";
 		soc_info->compatible = "ralink,rt3352-soc";
 	} else if (n0 == RT5350_CHIP_NAME0 && n1 == RT5350_CHIP_NAME1) {
-		rt305x_soc = RT305X_SOC_RT5350;
+		ralink_soc = RT305X_SOC_RT5350;
 		name = "RT5350";
 		soc_info->compatible = "ralink,rt5350-soc";
 	} else {
diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
index 86a535c..fafec94 100644
--- a/arch/mips/ralink/rt3883.c
+++ b/arch/mips/ralink/rt3883.c
@@ -109,6 +109,7 @@ void __init ralink_clk_init(void)
 	ralink_clk_add("10000120.watchdog", sys_rate);
 	ralink_clk_add("10000500.uart", 40000000);
 	ralink_clk_add("10000b00.spi", sys_rate);
+	ralink_clk_add("10000b40.spi", sys_rate);
 	ralink_clk_add("10000c00.uartlite", 40000000);
 	ralink_clk_add("10100000.ethernet", sys_rate);
 	ralink_clk_add("10180000.wmac", 40000000);
@@ -153,4 +154,6 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 	soc_info->mem_size_max = RT3883_MEM_SIZE_MAX;
 
 	rt2880_pinmux_data = rt3883_pinmux_data;
+
+	ralink_soc == RT3883_SOC;
 }
diff --git a/arch/mips/ralink/timer-gic.c b/arch/mips/ralink/timer-gic.c
new file mode 100644
index 0000000..5b4f186
--- /dev/null
+++ b/arch/mips/ralink/timer-gic.c
@@ -0,0 +1,24 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright (C) 2015 Nikolay Martynov <mar.kolya@gmail.com>
+ * Copyright (C) 2015 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+
+#include <linux/of.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+
+#include "common.h"
+
+void __init plat_time_init(void)
+{
+	ralink_of_remap();
+
+	of_clk_init(NULL);
+	clocksource_probe();
+}