diff options
Diffstat (limited to 'arch/mips/ralink/mt7620.c')
| -rw-r--r-- | arch/mips/ralink/mt7620.c | 205 |
1 files changed, 180 insertions, 25 deletions
diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c index 0018b1a..d217509 100644 --- a/arch/mips/ralink/mt7620.c +++ b/arch/mips/ralink/mt7620.c @@ -23,9 +23,6 @@ /* does the board have sdram or ddram */ static int dram_type; -/* the pll dividers */ -static u32 mt7620_clk_divider[] = { 2, 3, 4, 8 }; - static struct ralink_pinmux_grp mode_mux[] = { { .name = "i2c", @@ -140,34 +137,189 @@ struct ralink_pinmux rt_gpio_pinmux = { .uart_mask = MT7620_GPIO_MODE_UART0_MASK, }; -void __init ralink_clk_init(void) +static __init u32 +mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div) { - unsigned long cpu_rate, sys_rate; - u32 c0 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0); - u32 c1 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1); - u32 swconfig = (c0 >> CPLL_SW_CONFIG_SHIFT) & CPLL_SW_CONFIG_MASK; - u32 cpu_clk = (c1 >> CPLL_CPU_CLK_SHIFT) & CPLL_CPU_CLK_MASK; - - if (cpu_clk) { - cpu_rate = 480000000; - } else if (!swconfig) { - cpu_rate = 600000000; - } else { - u32 m = (c0 >> CPLL_MULT_RATIO_SHIFT) & CPLL_MULT_RATIO; - u32 d = (c0 >> CPLL_DIV_RATIO_SHIFT) & CPLL_DIV_RATIO; + u64 t; - cpu_rate = ((40 * (m + 24)) / mt7620_clk_divider[d]) * 1000000; - } + t = ref_rate; + t *= mul; + do_div(t, div); + + return t; +} + +#define MHZ(x) ((x) * 1000 * 1000) + +static __init unsigned long +mt7620_get_xtal_rate(void) +{ + u32 reg; + + reg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0); + if (reg & SYSCFG0_XTAL_FREQ_SEL) + return MHZ(40); + + return MHZ(20); +} + +static __init unsigned long +mt7620_get_periph_rate(unsigned long xtal_rate) +{ + u32 reg; + + reg = rt_sysc_r32(SYSC_REG_CLKCFG0); + if (reg & CLKCFG0_PERI_CLK_SEL) + return xtal_rate; + + return MHZ(40); +} + +static const u32 mt7620_clk_divider[] __initconst = { 2, 3, 4, 8 }; + +static __init unsigned long +mt7620_get_cpu_pll_rate(unsigned long xtal_rate) +{ + u32 reg; + u32 mul; + u32 div; + + reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0); + if (reg & CPLL_CFG0_BYPASS_REF_CLK) + return xtal_rate; + + if ((reg & CPLL_CFG0_SW_CFG) == 0) + return MHZ(600); + + mul = (reg >> CPLL_CFG0_PLL_MULT_RATIO_SHIFT) & + CPLL_CFG0_PLL_MULT_RATIO_MASK; + mul += 24; + if (reg & CPLL_CFG0_LC_CURFCK) + mul *= 2; + + div = (reg >> CPLL_CFG0_PLL_DIV_RATIO_SHIFT) & + CPLL_CFG0_PLL_DIV_RATIO_MASK; + + WARN_ON(div >= ARRAY_SIZE(mt7620_clk_divider)); + + return mt7620_calc_rate(xtal_rate, mul, mt7620_clk_divider[div]); +} + +static __init unsigned long +mt7620_get_pll_rate(unsigned long xtal_rate, unsigned long cpu_pll_rate) +{ + u32 reg; + + reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1); + if (reg & CPLL_CFG1_CPU_AUX1) + return xtal_rate; + + if (reg & CPLL_CFG1_CPU_AUX0) + return MHZ(480); + return cpu_pll_rate; +} + +static __init unsigned long +mt7620_get_cpu_rate(unsigned long pll_rate) +{ + u32 reg; + u32 mul; + u32 div; + + reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG); + + mul = reg & CPU_SYS_CLKCFG_CPU_FFRAC_MASK; + div = (reg >> CPU_SYS_CLKCFG_CPU_FDIV_SHIFT) & + CPU_SYS_CLKCFG_CPU_FDIV_MASK; + + return mt7620_calc_rate(pll_rate, mul, div); +} + +static const u32 mt7620_ocp_dividers[16] __initconst = { + [CPU_SYS_CLKCFG_OCP_RATIO_2] = 2, + [CPU_SYS_CLKCFG_OCP_RATIO_3] = 3, + [CPU_SYS_CLKCFG_OCP_RATIO_4] = 4, + [CPU_SYS_CLKCFG_OCP_RATIO_5] = 5, + [CPU_SYS_CLKCFG_OCP_RATIO_10] = 10, +}; + +static __init unsigned long +mt7620_get_dram_rate(unsigned long pll_rate) +{ if (dram_type == SYSCFG0_DRAM_TYPE_SDRAM) - sys_rate = cpu_rate / 4; - else - sys_rate = cpu_rate / 3; + return pll_rate / 4; + + return pll_rate / 3; +} + +static __init unsigned long +mt7620_get_sys_rate(unsigned long cpu_rate) +{ + u32 reg; + u32 ocp_ratio; + u32 div; + + reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG); + + ocp_ratio = (reg >> CPU_SYS_CLKCFG_OCP_RATIO_SHIFT) & + CPU_SYS_CLKCFG_OCP_RATIO_MASK; + + if (WARN_ON(ocp_ratio >= ARRAY_SIZE(mt7620_ocp_dividers))) + return cpu_rate; + + div = mt7620_ocp_dividers[ocp_ratio]; + if (WARN(!div, "invalid divider for OCP ratio %u", ocp_ratio)) + return cpu_rate; + + return cpu_rate / div; +} + +void __init ralink_clk_init(void) +{ + unsigned long xtal_rate; + unsigned long cpu_pll_rate; + unsigned long pll_rate; + unsigned long cpu_rate; + unsigned long sys_rate; + unsigned long dram_rate; + unsigned long periph_rate; + + xtal_rate = mt7620_get_xtal_rate(); + + cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate); + pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate); + + cpu_rate = mt7620_get_cpu_rate(pll_rate); + dram_rate = mt7620_get_dram_rate(pll_rate); + sys_rate = mt7620_get_sys_rate(cpu_rate); + periph_rate = mt7620_get_periph_rate(xtal_rate); + +#define RFMT(label) label ":%lu.%03luMHz " +#define RINT(x) ((x) / 1000000) +#define RFRAC(x) (((x) / 1000) % 1000) + + pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"), + RINT(xtal_rate), RFRAC(xtal_rate), + RINT(cpu_pll_rate), RFRAC(cpu_pll_rate), + RINT(pll_rate), RFRAC(pll_rate)); + + pr_debug(RFMT("CPU") RFMT("DRAM") RFMT("SYS") RFMT("PERIPH"), + RINT(cpu_rate), RFRAC(cpu_rate), + RINT(dram_rate), RFRAC(dram_rate), + RINT(sys_rate), RFRAC(sys_rate), + RINT(periph_rate), RFRAC(periph_rate)); + +#undef RFRAC +#undef RINT +#undef RFMT ralink_clk_add("cpu", cpu_rate); - ralink_clk_add("10000100.timer", 40000000); - ralink_clk_add("10000500.uart", 40000000); - ralink_clk_add("10000c00.uartlite", 40000000); + ralink_clk_add("10000100.timer", periph_rate); + ralink_clk_add("10000120.watchdog", periph_rate); + ralink_clk_add("10000500.uart", periph_rate); + ralink_clk_add("10000b00.spi", sys_rate); + ralink_clk_add("10000c00.uartlite", periph_rate); } void __init ralink_of_remap(void) @@ -214,16 +366,19 @@ void prom_soc_init(struct ralink_soc_info *soc_info) switch (dram_type) { case SYSCFG0_DRAM_TYPE_SDRAM: + pr_info("Board has SDRAM\n"); soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN; soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX; break; case SYSCFG0_DRAM_TYPE_DDR1: + pr_info("Board has DDR1\n"); soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN; soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX; break; case SYSCFG0_DRAM_TYPE_DDR2: + pr_info("Board has DDR2\n"); soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN; soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX; break; |
