diff options
Diffstat (limited to 'arch/mips/philips/pnx8550/common/setup.c')
| -rw-r--r-- | arch/mips/philips/pnx8550/common/setup.c | 149 |
1 files changed, 149 insertions, 0 deletions
diff --git a/arch/mips/philips/pnx8550/common/setup.c b/arch/mips/philips/pnx8550/common/setup.c new file mode 100644 index 0000000..ee6bf72 --- /dev/null +++ b/arch/mips/philips/pnx8550/common/setup.c @@ -0,0 +1,149 @@ +/* + * + * 2.6 port, Embedded Alley Solutions, Inc + * + * Based on Per Hallsmark, per.hallsmark@mvista.com + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#include <linux/config.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/mm.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/serial_ip3106.h> + +#include <asm/cpu.h> +#include <asm/bootinfo.h> +#include <asm/irq.h> +#include <asm/mipsregs.h> +#include <asm/reboot.h> +#include <asm/pgtable.h> +#include <asm/time.h> + +#include <glb.h> +#include <int.h> +#include <pci.h> +#include <uart.h> +#include <nand.h> + +extern void prom_printf(char *fmt, ...); + +extern void __init board_setup(void); +extern void pnx8550_machine_restart(char *); +extern void pnx8550_machine_halt(void); +extern void pnx8550_machine_power_off(void); +extern struct resource ioport_resource; +extern struct resource iomem_resource; +extern void (*board_time_init)(void); +extern void pnx8550_time_init(void); +extern void (*board_timer_setup)(struct irqaction *irq); +extern void pnx8550_timer_setup(struct irqaction *irq); +extern void rs_kgdb_hook(int tty_no); +extern void prom_printf(char *fmt, ...); +extern char *prom_getcmdline(void); + +struct resource standard_io_resources[] = { + {"dma1", 0x00, 0x1f, IORESOURCE_BUSY}, + {"timer", 0x40, 0x5f, IORESOURCE_BUSY}, + {"dma page reg", 0x80, 0x8f, IORESOURCE_BUSY}, + {"dma2", 0xc0, 0xdf, IORESOURCE_BUSY}, +}; + +#define STANDARD_IO_RESOURCES (sizeof(standard_io_resources)/sizeof(struct resource)) + +extern struct resource pci_io_resource; +extern struct resource pci_mem_resource; + +/* Return the total size of DRAM-memory, (RANK0 + RANK1) */ +unsigned long get_system_mem_size(void) +{ + /* Read IP2031_RANK0_ADDR_LO */ + unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010); + /* Read IP2031_RANK1_ADDR_HI */ + unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018); + + return dram_r1_hi - dram_r0_lo + 1; +} + +int pnx8550_console_port = -1; + +void __init plat_setup(void) +{ + int i; + char* argptr; + + board_setup(); /* board specific setup */ + + _machine_restart = pnx8550_machine_restart; + _machine_halt = pnx8550_machine_halt; + _machine_power_off = pnx8550_machine_power_off; + + board_time_init = pnx8550_time_init; + board_timer_setup = pnx8550_timer_setup; + + /* Clear the Global 2 Register, PCI Inta Output Enable Registers + Bit 1:Enable DAC Powerdown + -> 0:DACs are enabled and are working normally + 1:DACs are powerdown + Bit 0:Enable of PCI inta output + -> 0 = Disable PCI inta output + 1 = Enable PCI inta output + */ + PNX8550_GLB2_ENAB_INTA_O = 0; + + /* IO/MEM resources. */ + set_io_port_base(KSEG1); + ioport_resource.start = 0; + ioport_resource.end = ~0; + iomem_resource.start = 0; + iomem_resource.end = ~0; + + /* Request I/O space for devices on this board */ + for (i = 0; i < STANDARD_IO_RESOURCES; i++) + request_resource(&ioport_resource, standard_io_resources + i); + + /* Place the Mode Control bit for GPIO pin 16 in primary function */ + /* Pin 16 is used by UART1, UA1_TX */ + outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) | + (PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT), + PNX8550_GPIO_MC1); + + argptr = prom_getcmdline(); + if ((argptr = strstr(argptr, "console=ttyS")) != NULL) { + argptr += strlen("console=ttyS"); + pnx8550_console_port = *argptr == '0' ? 0 : 1; + + /* We must initialize the UART (console) before prom_printf */ + /* Set LCR to 8-bit and BAUD to 38400 (no 5) */ + ip3106_lcr(UART_BASE, pnx8550_console_port) = + IP3106_UART_LCR_8BIT; + ip3106_baud(UART_BASE, pnx8550_console_port) = 5; + } + +#ifdef CONFIG_KGDB + argptr = prom_getcmdline(); + if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) { + int line; + argptr += strlen("kgdb=ttyS"); + line = *argptr == '0' ? 0 : 1; + rs_kgdb_hook(line); + prom_printf("KGDB: Using ttyS%i for session, " + "please connect your debugger\n", line ? 1 : 0); + } +#endif + return; +} |
