diff options
Diffstat (limited to 'arch/mips/pci/pci-sb1250.c')
| -rw-r--r-- | arch/mips/pci/pci-sb1250.c | 292 |
1 files changed, 292 insertions, 0 deletions
diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c new file mode 100644 index 0000000..7cca3bd --- /dev/null +++ b/arch/mips/pci/pci-sb1250.c @@ -0,0 +1,292 @@ +/* + * Copyright (C) 2001,2002,2003 Broadcom Corporation + * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + * BCM1250-specific PCI support + * + * This module provides the glue between Linux's PCI subsystem + * and the hardware. We basically provide glue for accessing + * configuration space, and set up the translation for I/O + * space accesses. + * + * To access configuration space, we use ioremap. In the 32-bit + * kernel, this consumes either 4 or 8 page table pages, and 16MB of + * kernel mapped memory. Hopefully neither of these should be a huge + * problem. + */ +#include <linux/config.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/console.h> +#include <linux/tty.h> + +#include <asm/io.h> + +#include <asm/sibyte/sb1250_defs.h> +#include <asm/sibyte/sb1250_regs.h> +#include <asm/sibyte/sb1250_scd.h> +#include <asm/sibyte/board.h> + +/* + * Macros for calculating offsets into config space given a device + * structure or dev/fun/reg + */ +#define CFGOFFSET(bus,devfn,where) (((bus)<<16) + ((devfn)<<8) + (where)) +#define CFGADDR(bus,devfn,where) CFGOFFSET((bus)->number,(devfn),where) + +static void *cfg_space; + +#define PCI_BUS_ENABLED 1 +#define LDT_BUS_ENABLED 2 +#define PCI_DEVICE_MODE 4 + +static int sb1250_bus_status = 0; + +#define PCI_BRIDGE_DEVICE 0 +#define LDT_BRIDGE_DEVICE 1 + +#ifdef CONFIG_SIBYTE_HAS_LDT +/* + * HT's level-sensitive interrupts require EOI, which is generated + * through a 4MB memory-mapped region + */ +unsigned long ldt_eoi_space; +#endif + +/* + * Read/write 32-bit values in config space. + */ +static inline u32 READCFG32(u32 addr) +{ + return *(u32 *) (cfg_space + (addr & ~3)); +} + +static inline void WRITECFG32(u32 addr, u32 data) +{ + *(u32 *) (cfg_space + (addr & ~3)) = data; +} + +int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + return dev->irq; +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} + +/* + * Some checks before doing config cycles: + * In PCI Device Mode, hide everything on bus 0 except the LDT host + * bridge. Otherwise, access is controlled by bridge MasterEn bits. + */ +static int sb1250_pci_can_access(struct pci_bus *bus, int devfn) +{ + u32 devno; + + if (!(sb1250_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE))) + return 0; + + if (bus->number == 0) { + devno = PCI_SLOT(devfn); + if (devno == LDT_BRIDGE_DEVICE) + return (sb1250_bus_status & LDT_BUS_ENABLED) != 0; + else if (sb1250_bus_status & PCI_DEVICE_MODE) + return 0; + else + return 1; + } else + return 1; +} + +/* + * Read/write access functions for various sizes of values + * in config space. Return all 1's for disallowed accesses + * for a kludgy but adequate simulation of master aborts. + */ + +static int sb1250_pcibios_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 * val) +{ + u32 data = 0; + + if ((size == 2) && (where & 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + else if ((size == 4) && (where & 3)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + if (sb1250_pci_can_access(bus, devfn)) + data = READCFG32(CFGADDR(bus, devfn, where)); + else + data = 0xFFFFFFFF; + + if (size == 1) + *val = (data >> ((where & 3) << 3)) & 0xff; + else if (size == 2) + *val = (data >> ((where & 3) << 3)) & 0xffff; + else + *val = data; + + return PCIBIOS_SUCCESSFUL; +} + +static int sb1250_pcibios_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + u32 cfgaddr = CFGADDR(bus, devfn, where); + u32 data = 0; + + if ((size == 2) && (where & 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + else if ((size == 4) && (where & 3)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + if (!sb1250_pci_can_access(bus, devfn)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + data = READCFG32(cfgaddr); + + if (size == 1) + data = (data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + else if (size == 2) + data = (data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + else + data = val; + + WRITECFG32(cfgaddr, data); + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops sb1250_pci_ops = { + .read = sb1250_pcibios_read, + .write = sb1250_pcibios_write, +}; + +static struct resource sb1250_mem_resource = { + .name = "SB1250 PCI MEM", + .start = 0x40000000UL, + .end = 0x5fffffffUL, + .flags = IORESOURCE_MEM, +}; + +static struct resource sb1250_io_resource = { + .name = "SB1250 PCI I/O", + .start = 0x00000000UL, + .end = 0x01ffffffUL, + .flags = IORESOURCE_IO, +}; + +struct pci_controller sb1250_controller = { + .pci_ops = &sb1250_pci_ops, + .mem_resource = &sb1250_mem_resource, + .io_resource = &sb1250_io_resource, +}; + +static int __init sb1250_pcibios_init(void) +{ + uint32_t cmdreg; + uint64_t reg; + extern int pci_probe_only; + + /* CFE will assign PCI resources */ + pci_probe_only = 1; + + /* Avoid ISA compat ranges. */ + PCIBIOS_MIN_IO = 0x00008000UL; + PCIBIOS_MIN_MEM = 0x01000000UL; + + /* Set I/O resource limits. */ + ioport_resource.end = 0x01ffffffUL; /* 32MB accessible by sb1250 */ + iomem_resource.end = 0xffffffffUL; /* no HT support yet */ + + cfg_space = + ioremap(A_PHYS_LDTPCI_CFG_MATCH_BITS, 16 * 1024 * 1024); + + /* + * See if the PCI bus has been configured by the firmware. + */ + reg = *((volatile uint64_t *) IOADDR(A_SCD_SYSTEM_CFG)); + if (!(reg & M_SYS_PCI_HOST)) { + sb1250_bus_status |= PCI_DEVICE_MODE; + } else { + cmdreg = + READCFG32(CFGOFFSET + (0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0), + PCI_COMMAND)); + if (!(cmdreg & PCI_COMMAND_MASTER)) { + printk + ("PCI: Skipping PCI probe. Bus is not initialized.\n"); + iounmap(cfg_space); + return 0; + } + sb1250_bus_status |= PCI_BUS_ENABLED; + } + + /* + * Establish mappings in KSEG2 (kernel virtual) to PCI I/O + * space. Use "match bytes" policy to make everything look + * little-endian. So, you need to also set + * CONFIG_SWAP_IO_SPACE, but this is the combination that + * works correctly with most of Linux's drivers. + * XXX ehs: Should this happen in PCI Device mode? + */ + + set_io_port_base((unsigned long) + ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 65536)); + isa_slot_offset = (unsigned long) + ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES_32, 1024 * 1024); + +#ifdef CONFIG_SIBYTE_HAS_LDT + /* + * Also check the LDT bridge's enable, just in case we didn't + * initialize that one. + */ + + cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(LDT_BRIDGE_DEVICE, 0), + PCI_COMMAND)); + if (cmdreg & PCI_COMMAND_MASTER) { + sb1250_bus_status |= LDT_BUS_ENABLED; + + /* + * Need bits 23:16 to convey vector number. Note that + * this consumes 4MB of kernel-mapped memory + * (Kseg2/Kseg3) for 32-bit kernel. + */ + ldt_eoi_space = (unsigned long) + ioremap(A_PHYS_LDT_SPECIAL_MATCH_BYTES, + 4 * 1024 * 1024); + } +#endif + + register_pci_controller(&sb1250_controller); + +#ifdef CONFIG_VGA_CONSOLE + take_over_console(&vga_con, 0, MAX_NR_CONSOLES - 1, 1); +#endif + return 0; +} +arch_initcall(sb1250_pcibios_init); |
