summaryrefslogtreecommitdiffstats
path: root/arch/mips/pci/ops-loongson2.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/pci/ops-loongson2.c')
-rw-r--r--arch/mips/pci/ops-loongson2.c208
1 files changed, 208 insertions, 0 deletions
diff --git a/arch/mips/pci/ops-loongson2.c b/arch/mips/pci/ops-loongson2.c
new file mode 100644
index 0000000..aa5d3da
--- /dev/null
+++ b/arch/mips/pci/ops-loongson2.c
@@ -0,0 +1,208 @@
+/*
+ * fuloong2e specific PCI support.
+ *
+ * Copyright (C) 1999, 2000, 2004 MIPS Technologies, Inc.
+ * All rights reserved.
+ * Authors: Carsten Langgaard <carstenl@mips.com>
+ * Maciej W. Rozycki <macro@mips.com>
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ *
+ * This program is free software; you can distribute it and/or modify it
+ * under the terms of the GNU General Public License (Version 2) as
+ * published by the Free Software Foundation.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <loongson.h>
+
+#ifdef CONFIG_CS5536
+#include <cs5536/cs5536_pci.h>
+#include <cs5536/cs5536.h>
+#endif
+
+#define PCI_ACCESS_READ 0
+#define PCI_ACCESS_WRITE 1
+
+#define CFG_SPACE_REG(offset) \
+ (void *)CKSEG1ADDR(LOONGSON_PCICFG_BASE | (offset))
+#define ID_SEL_BEGIN 11
+#define MAX_DEV_NUM (31 - ID_SEL_BEGIN)
+
+
+static int loongson_pcibios_config_access(unsigned char access_type,
+ struct pci_bus *bus,
+ unsigned int devfn, int where,
+ u32 *data)
+{
+ u32 busnum = bus->number;
+ u32 addr, type;
+ u32 dummy;
+ void *addrp;
+ int device = PCI_SLOT(devfn);
+ int function = PCI_FUNC(devfn);
+ int reg = where & ~3;
+
+ if (busnum == 0) {
+ /* board-specific part,currently,only fuloong2f,yeeloong2f
+ * use CS5536, fuloong2e use via686b, gdium has no
+ * south bridge
+ */
+#ifdef CONFIG_CS5536
+ /* cs5536_pci_conf_read4/write4() will call _rdmsr/_wrmsr() to
+ * access the regsters PCI_MSR_ADDR, PCI_MSR_DATA_LO,
+ * PCI_MSR_DATA_HI, which is bigger than PCI_MSR_CTRL, so, it
+ * will not go this branch, but the others. so, no calling dead
+ * loop here.
+ */
+ if ((PCI_IDSEL_CS5536 == device) && (reg < PCI_MSR_CTRL)) {
+ switch (access_type) {
+ case PCI_ACCESS_READ:
+ *data = cs5536_pci_conf_read4(function, reg);
+ break;
+ case PCI_ACCESS_WRITE:
+ cs5536_pci_conf_write4(function, reg, *data);
+ break;
+ }
+ return 0;
+ }
+#endif
+ /* Type 0 configuration for onboard PCI bus */
+ if (device > MAX_DEV_NUM)
+ return -1;
+
+ addr = (1 << (device + ID_SEL_BEGIN)) | (function << 8) | reg;
+ type = 0;
+ } else {
+ /* Type 1 configuration for offboard PCI bus */
+ addr = (busnum << 16) | (device << 11) | (function << 8) | reg;
+ type = 0x10000;
+ }
+
+ /* Clear aborts */
+ LOONGSON_PCICMD |= LOONGSON_PCICMD_MABORT_CLR | \
+ LOONGSON_PCICMD_MTABORT_CLR;
+
+ LOONGSON_PCIMAP_CFG = (addr >> 16) | type;
+
+ /* Flush Bonito register block */
+ dummy = LOONGSON_PCIMAP_CFG;
+ mmiowb();
+
+ addrp = CFG_SPACE_REG(addr & 0xffff);
+ if (access_type == PCI_ACCESS_WRITE)
+ writel(cpu_to_le32(*data), addrp);
+ else
+ *data = le32_to_cpu(readl(addrp));
+
+ /* Detect Master/Target abort */
+ if (LOONGSON_PCICMD & (LOONGSON_PCICMD_MABORT_CLR |
+ LOONGSON_PCICMD_MTABORT_CLR)) {
+ /* Error occurred */
+
+ /* Clear bits */
+ LOONGSON_PCICMD |= (LOONGSON_PCICMD_MABORT_CLR |
+ LOONGSON_PCICMD_MTABORT_CLR);
+
+ return -1;
+ }
+
+ return 0;
+
+}
+
+
+/*
+ * We can't address 8 and 16 bit words directly. Instead we have to
+ * read/write a 32bit word and mask/modify the data we actually want.
+ */
+static int loongson_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (loongson_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where,
+ &data))
+ return -1;
+
+ if (size == 1)
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ else if (size == 2)
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ else
+ *val = data;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int loongson_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ u32 data = 0;
+
+ if ((size == 2) && (where & 1))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ else if ((size == 4) && (where & 3))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ if (size == 4)
+ data = val;
+ else {
+ if (loongson_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
+ where, &data))
+ return -1;
+
+ if (size == 1)
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else if (size == 2)
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ }
+
+ if (loongson_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, where,
+ &data))
+ return -1;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops loongson_pci_ops = {
+ .read = loongson_pcibios_read,
+ .write = loongson_pcibios_write
+};
+
+#ifdef CONFIG_CS5536
+void _rdmsr(u32 msr, u32 *hi, u32 *lo)
+{
+ struct pci_bus bus = {
+ .number = PCI_BUS_CS5536
+ };
+ u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0);
+ loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr);
+ loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_LO, 4, lo);
+ loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_HI, 4, hi);
+}
+EXPORT_SYMBOL(_rdmsr);
+
+void _wrmsr(u32 msr, u32 hi, u32 lo)
+{
+ struct pci_bus bus = {
+ .number = PCI_BUS_CS5536
+ };
+ u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0);
+ loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr);
+ loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_LO, 4, lo);
+ loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_HI, 4, hi);
+}
+EXPORT_SYMBOL(_wrmsr);
+#endif
OpenPOWER on IntegriCloud