summaryrefslogtreecommitdiffstats
path: root/arch/mips/jmr3927/rbhma3100/setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/jmr3927/rbhma3100/setup.c')
-rw-r--r--arch/mips/jmr3927/rbhma3100/setup.c445
1 files changed, 0 insertions, 445 deletions
diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c
deleted file mode 100644
index f39c444..0000000
--- a/arch/mips/jmr3927/rbhma3100/setup.c
+++ /dev/null
@@ -1,445 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ahennessy@mvista.com
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/pm.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#ifdef CONFIG_SERIAL_TXX9
-#include <linux/serial_core.h>
-#endif
-
-#include <asm/txx9tmr.h>
-#include <asm/txx9pio.h>
-#include <asm/reboot.h>
-#include <asm/jmr3927/jmr3927.h>
-#include <asm/mipsregs.h>
-
-extern void puts(const char *cp);
-
-/* don't enable - see errata */
-static int jmr3927_ccfg_toeon;
-
-static inline void do_reset(void)
-{
-#if 1 /* Resetting PCI bus */
- jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
- jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR);
- (void)jmr3927_ioc_reg_in(JMR3927_IOC_RESET_ADDR); /* flush WB */
- mdelay(1);
- jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
-#endif
- jmr3927_ioc_reg_out(JMR3927_IOC_RESET_CPU, JMR3927_IOC_RESET_ADDR);
-}
-
-static void jmr3927_machine_restart(char *command)
-{
- local_irq_disable();
- puts("Rebooting...");
- do_reset();
-}
-
-static void jmr3927_machine_halt(void)
-{
- puts("JMR-TX3927 halted.\n");
- while (1);
-}
-
-static void jmr3927_machine_power_off(void)
-{
- puts("JMR-TX3927 halted. Please turn off the power.\n");
- while (1);
-}
-
-void __init plat_time_init(void)
-{
- txx9_clockevent_init(TX3927_TMR_REG(0),
- TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0),
- JMR3927_IMCLK);
- txx9_clocksource_init(TX3927_TMR_REG(1), JMR3927_IMCLK);
-}
-
-#define DO_WRITE_THROUGH
-#define DO_ENABLE_CACHE
-
-extern char * __init prom_getcmdline(void);
-static void jmr3927_board_init(void);
-extern struct resource pci_io_resource;
-extern struct resource pci_mem_resource;
-
-void __init plat_mem_setup(void)
-{
- char *argptr;
-
- set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO);
-
- _machine_restart = jmr3927_machine_restart;
- _machine_halt = jmr3927_machine_halt;
- pm_power_off = jmr3927_machine_power_off;
-
- /*
- * IO/MEM resources.
- */
- ioport_resource.start = pci_io_resource.start;
- ioport_resource.end = pci_io_resource.end;
- iomem_resource.start = 0;
- iomem_resource.end = 0xffffffff;
-
- /* Reboot on panic */
- panic_timeout = 180;
-
- /* cache setup */
- {
- unsigned int conf;
-#ifdef DO_ENABLE_CACHE
- int mips_ic_disable = 0, mips_dc_disable = 0;
-#else
- int mips_ic_disable = 1, mips_dc_disable = 1;
-#endif
-#ifdef DO_WRITE_THROUGH
- int mips_config_cwfon = 0;
- int mips_config_wbon = 0;
-#else
- int mips_config_cwfon = 1;
- int mips_config_wbon = 1;
-#endif
-
- conf = read_c0_conf();
- conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | TX39_CONF_WBON | TX39_CONF_CWFON);
- conf |= mips_ic_disable ? 0 : TX39_CONF_ICE;
- conf |= mips_dc_disable ? 0 : TX39_CONF_DCE;
- conf |= mips_config_wbon ? TX39_CONF_WBON : 0;
- conf |= mips_config_cwfon ? TX39_CONF_CWFON : 0;
-
- write_c0_conf(conf);
- write_c0_cache(0);
- }
-
- /* initialize board */
- jmr3927_board_init();
-
- argptr = prom_getcmdline();
-
- if ((argptr = strstr(argptr, "toeon")) != NULL)
- jmr3927_ccfg_toeon = 1;
- argptr = prom_getcmdline();
- if ((argptr = strstr(argptr, "ip=")) == NULL) {
- argptr = prom_getcmdline();
- strcat(argptr, " ip=bootp");
- }
-
-#ifdef CONFIG_SERIAL_TXX9
- {
- extern int early_serial_txx9_setup(struct uart_port *port);
- int i;
- struct uart_port req;
- for(i = 0; i < 2; i++) {
- memset(&req, 0, sizeof(req));
- req.line = i;
- req.iotype = UPIO_MEM;
- req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i);
- req.mapbase = TX3927_SIO_REG(i);
- req.irq = i == 0 ?
- JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1;
- if (i == 0)
- req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
- req.uartclk = JMR3927_IMCLK;
- early_serial_txx9_setup(&req);
- }
- }
-#ifdef CONFIG_SERIAL_TXX9_CONSOLE
- argptr = prom_getcmdline();
- if ((argptr = strstr(argptr, "console=")) == NULL) {
- argptr = prom_getcmdline();
- strcat(argptr, " console=ttyS1,115200");
- }
-#endif
-#endif
-}
-
-static void tx3927_setup(void);
-
-static void __init jmr3927_board_init(void)
-{
- tx3927_setup();
-
- /* SIO0 DTR on */
- jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
-
- jmr3927_led_set(0);
-
- printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
- jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
- jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
- jmr3927_dipsw1(), jmr3927_dipsw2(),
- jmr3927_dipsw3(), jmr3927_dipsw4());
-}
-
-static void __init tx3927_setup(void)
-{
- int i;
-#ifdef CONFIG_PCI
- unsigned long mips_pci_io_base = JMR3927_PCIIO;
- unsigned long mips_pci_io_size = JMR3927_PCIIO_SIZE;
- unsigned long mips_pci_mem_base = JMR3927_PCIMEM;
- unsigned long mips_pci_mem_size = JMR3927_PCIMEM_SIZE;
- /* for legacy I/O, PCI I/O PCI Bus address must be 0 */
- unsigned long mips_pci_io_pciaddr = 0;
-#endif
-
- /* SDRAMC are configured by PROM */
-
- /* ROMC */
- tx3927_romcptr->cr[1] = JMR3927_ROMCE1 | 0x00030048;
- tx3927_romcptr->cr[2] = JMR3927_ROMCE2 | 0x000064c8;
- tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698;
- tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218;
-
- /* CCFG */
- /* enable Timeout BusError */
- if (jmr3927_ccfg_toeon)
- tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE;
-
- /* clear BusErrorOnWrite flag */
- tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW;
- /* Disable PCI snoop */
- tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP;
- /* do reset on watchdog */
- tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR;
-
-#ifdef DO_WRITE_THROUGH
- /* Enable PCI SNOOP - with write through only */
- tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP;
-#endif
-
- /* Pin selection */
- tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL;
- tx3927_ccfgptr->pcfg |=
- TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL |
- (TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1));
-
- printk("TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
- tx3927_ccfgptr->crir,
- tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
-
- /* TMR */
- for (i = 0; i < TX3927_NR_TMR; i++)
- txx9_tmr_init(TX3927_TMR_REG(i));
-
- /* DMA */
- tx3927_dmaptr->mcr = 0;
- for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) {
- /* reset channel */
- tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST;
- tx3927_dmaptr->ch[i].ccr = 0;
- }
- /* enable DMA */
-#ifdef __BIG_ENDIAN
- tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN;
-#else
- tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
-#endif
-
-#ifdef CONFIG_PCI
- /* PCIC */
- printk("TX3927 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:",
- tx3927_pcicptr->did, tx3927_pcicptr->vid,
- tx3927_pcicptr->rid);
- if (!(tx3927_ccfgptr->ccfg & TX3927_CCFG_PCIXARB)) {
- printk("External\n");
- /* XXX */
- } else {
- printk("Internal\n");
-
- /* Reset PCI Bus */
- jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
- udelay(100);
- jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI,
- JMR3927_IOC_RESET_ADDR);
- udelay(100);
- jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
-
-
- /* Disable External PCI Config. Access */
- tx3927_pcicptr->lbc = TX3927_PCIC_LBC_EPCAD;
-#ifdef __BIG_ENDIAN
- tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_IBSE |
- TX3927_PCIC_LBC_TIBSE |
- TX3927_PCIC_LBC_TMFBSE | TX3927_PCIC_LBC_MSDSE;
-#endif
- /* LB->PCI mappings */
- tx3927_pcicptr->iomas = ~(mips_pci_io_size - 1);
- tx3927_pcicptr->ilbioma = mips_pci_io_base;
- tx3927_pcicptr->ipbioma = mips_pci_io_pciaddr;
- tx3927_pcicptr->mmas = ~(mips_pci_mem_size - 1);
- tx3927_pcicptr->ilbmma = mips_pci_mem_base;
- tx3927_pcicptr->ipbmma = mips_pci_mem_base;
- /* PCI->LB mappings */
- tx3927_pcicptr->iobas = 0xffffffff;
- tx3927_pcicptr->ioba = 0;
- tx3927_pcicptr->tlbioma = 0;
- tx3927_pcicptr->mbas = ~(mips_pci_mem_size - 1);
- tx3927_pcicptr->mba = 0;
- tx3927_pcicptr->tlbmma = 0;
- /* Enable Direct mapping Address Space Decoder */
- tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_ILMDE | TX3927_PCIC_LBC_ILIDE;
-
- /* Clear All Local Bus Status */
- tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL;
- /* Enable All Local Bus Interrupts */
- tx3927_pcicptr->lbim = TX3927_PCIC_LBIM_ALL;
- /* Clear All PCI Status Error */
- tx3927_pcicptr->pcistat = TX3927_PCIC_PCISTATIM_ALL;
- /* Enable All PCI Status Error Interrupts */
- tx3927_pcicptr->pcistatim = TX3927_PCIC_PCISTATIM_ALL;
-
- /* PCIC Int => IRC IRQ10 */
- tx3927_pcicptr->il = TX3927_IR_PCI;
- /* Target Control (per errata) */
- tx3927_pcicptr->tc = TX3927_PCIC_TC_OF8E | TX3927_PCIC_TC_IF8E;
-
- /* Enable Bus Arbiter */
- tx3927_pcicptr->pbapmc = TX3927_PCIC_PBAPMC_PBAEN;
-
- tx3927_pcicptr->pcicmd = PCI_COMMAND_MASTER |
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_IO |
- PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
- }
-#endif /* CONFIG_PCI */
-
- /* PIO */
- /* PIO[15:12] connected to LEDs */
- __raw_writel(0x0000f000, &tx3927_pioptr->dir);
- __raw_writel(0, &tx3927_pioptr->maskcpu);
- __raw_writel(0, &tx3927_pioptr->maskext);
- txx9_gpio_init(TX3927_PIO_REG, 0, 16);
- gpio_request(11, "dipsw1");
- gpio_request(10, "dipsw2");
- {
- unsigned int conf;
-
- conf = read_c0_conf();
- if (!(conf & TX39_CONF_ICE))
- printk("TX3927 I-Cache disabled.\n");
- if (!(conf & TX39_CONF_DCE))
- printk("TX3927 D-Cache disabled.\n");
- else if (!(conf & TX39_CONF_WBON))
- printk("TX3927 D-Cache WriteThrough.\n");
- else if (!(conf & TX39_CONF_CWFON))
- printk("TX3927 D-Cache WriteBack.\n");
- else
- printk("TX3927 D-Cache WriteBack (CWF) .\n");
- }
-}
-
-/* This trick makes rtc-ds1742 driver usable as is. */
-unsigned long __swizzle_addr_b(unsigned long port)
-{
- if ((port & 0xffff0000) != JMR3927_IOC_NVRAMB_ADDR)
- return port;
- port = (port & 0xffff0000) | (port & 0x7fff << 1);
-#ifdef __BIG_ENDIAN
- return port;
-#else
- return port | 1;
-#endif
-}
-EXPORT_SYMBOL(__swizzle_addr_b);
-
-static int __init jmr3927_rtc_init(void)
-{
- static struct resource __initdata res = {
- .start = JMR3927_IOC_NVRAMB_ADDR - IO_BASE,
- .end = JMR3927_IOC_NVRAMB_ADDR - IO_BASE + 0x800 - 1,
- .flags = IORESOURCE_MEM,
- };
- struct platform_device *dev;
- dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1);
- return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-device_initcall(jmr3927_rtc_init);
-
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
- struct resource res = {
- .start = base,
- .end = base + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- };
- struct platform_device *dev =
- platform_device_register_simple("txx9wdt", -1, &res, 1);
- return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init jmr3927_wdt_init(void)
-{
- return txx9_wdt_init(TX3927_TMR_REG(2));
-}
-device_initcall(jmr3927_wdt_init);
-
-/* Minimum CLK support */
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
- if (!strcmp(id, "imbus_clk"))
- return (struct clk *)JMR3927_IMCLK;
- return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-int clk_enable(struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- return (unsigned long)clk;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
OpenPOWER on IntegriCloud