diff options
Diffstat (limited to 'arch/mips/include/asm/mach-au1x00')
| -rw-r--r-- | arch/mips/include/asm/mach-au1x00/au1000.h | 334 | ||||
| -rw-r--r-- | arch/mips/include/asm/mach-au1x00/au1000_dma.h | 4 | ||||
| -rw-r--r-- | arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h | 8 | ||||
| -rw-r--r-- | arch/mips/include/asm/mach-au1x00/gpio-au1000.h | 122 |
4 files changed, 180 insertions, 288 deletions
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h index a697661..f260ebe 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000.h +++ b/arch/mips/include/asm/mach-au1x00/au1000.h @@ -161,6 +161,45 @@ static inline int alchemy_get_cputype(void) return ALCHEMY_CPU_UNKNOWN; } +/* return number of uarts on a given cputype */ +static inline int alchemy_get_uarts(int type) +{ + switch (type) { + case ALCHEMY_CPU_AU1000: + return 4; + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1200: + return 2; + case ALCHEMY_CPU_AU1100: + case ALCHEMY_CPU_AU1550: + return 3; + } + return 0; +} + +/* enable an UART block if it isn't already */ +static inline void alchemy_uart_enable(u32 uart_phys) +{ + void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys); + + /* reset, enable clock, deassert reset */ + if ((__raw_readl(addr + 0x100) & 3) != 3) { + __raw_writel(0, addr + 0x100); + wmb(); + __raw_writel(1, addr + 0x100); + wmb(); + } + __raw_writel(3, addr + 0x100); + wmb(); +} + +static inline void alchemy_uart_disable(u32 uart_phys) +{ + void __iomem *addr = (void __iomem *)KSEG1ADDR(uart_phys); + __raw_writel(0, addr + 0x100); /* UART_MOD_CNTRL */ + wmb(); +} + static inline void alchemy_uart_putchar(u32 uart_phys, u8 c) { void __iomem *base = (void __iomem *)KSEG1ADDR(uart_phys); @@ -180,6 +219,20 @@ static inline void alchemy_uart_putchar(u32 uart_phys, u8 c) wmb(); } +/* return number of ethernet MACs on a given cputype */ +static inline int alchemy_get_macs(int type) +{ + switch (type) { + case ALCHEMY_CPU_AU1000: + case ALCHEMY_CPU_AU1500: + case ALCHEMY_CPU_AU1550: + return 2; + case ALCHEMY_CPU_AU1100: + return 1; + } + return 0; +} + /* arch/mips/au1000/common/clocks.c */ extern void set_au1x00_speed(unsigned int new_freq); extern unsigned int get_au1x00_speed(void); @@ -630,38 +683,42 @@ enum soc_au1200_ints { /* * Physical base addresses for integrated peripherals + * 0..au1000 1..au1500 2..au1100 3..au1550 4..au1200 */ +#define AU1000_AC97_PHYS_ADDR 0x10000000 /* 012 */ +#define AU1000_USBD_PHYS_ADDR 0x10200000 /* 0123 */ +#define AU1000_IC0_PHYS_ADDR 0x10400000 /* 01234 */ +#define AU1000_MAC0_PHYS_ADDR 0x10500000 /* 023 */ +#define AU1000_MAC1_PHYS_ADDR 0x10510000 /* 023 */ +#define AU1000_MACEN_PHYS_ADDR 0x10520000 /* 023 */ +#define AU1100_SD0_PHYS_ADDR 0x10600000 /* 24 */ +#define AU1100_SD1_PHYS_ADDR 0x10680000 /* 24 */ +#define AU1000_I2S_PHYS_ADDR 0x11000000 /* 02 */ +#define AU1500_MAC0_PHYS_ADDR 0x11500000 /* 1 */ +#define AU1500_MAC1_PHYS_ADDR 0x11510000 /* 1 */ +#define AU1500_MACEN_PHYS_ADDR 0x11520000 /* 1 */ +#define AU1000_UART0_PHYS_ADDR 0x11100000 /* 01234 */ +#define AU1000_UART1_PHYS_ADDR 0x11200000 /* 0234 */ +#define AU1000_UART2_PHYS_ADDR 0x11300000 /* 0 */ +#define AU1000_UART3_PHYS_ADDR 0x11400000 /* 0123 */ +#define AU1500_GPIO2_PHYS_ADDR 0x11700000 /* 1234 */ +#define AU1000_IC1_PHYS_ADDR 0x11800000 /* 01234 */ +#define AU1000_SYS_PHYS_ADDR 0x11900000 /* 01234 */ +#define AU1000_DMA_PHYS_ADDR 0x14002000 /* 012 */ +#define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 34 */ +#define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 34 */ +#define AU1000_MACDMA0_PHYS_ADDR 0x14004000 /* 0123 */ +#define AU1000_MACDMA1_PHYS_ADDR 0x14004200 /* 0123 */ + + #ifdef CONFIG_SOC_AU1000 #define MEM_PHYS_ADDR 0x14000000 #define STATIC_MEM_PHYS_ADDR 0x14001000 -#define DMA0_PHYS_ADDR 0x14002000 -#define DMA1_PHYS_ADDR 0x14002100 -#define DMA2_PHYS_ADDR 0x14002200 -#define DMA3_PHYS_ADDR 0x14002300 -#define DMA4_PHYS_ADDR 0x14002400 -#define DMA5_PHYS_ADDR 0x14002500 -#define DMA6_PHYS_ADDR 0x14002600 -#define DMA7_PHYS_ADDR 0x14002700 -#define IC0_PHYS_ADDR 0x10400000 -#define IC1_PHYS_ADDR 0x11800000 -#define AC97_PHYS_ADDR 0x10000000 #define USBH_PHYS_ADDR 0x10100000 -#define USBD_PHYS_ADDR 0x10200000 #define IRDA_PHYS_ADDR 0x10300000 -#define MAC0_PHYS_ADDR 0x10500000 -#define MAC1_PHYS_ADDR 0x10510000 -#define MACEN_PHYS_ADDR 0x10520000 -#define MACDMA0_PHYS_ADDR 0x14004000 -#define MACDMA1_PHYS_ADDR 0x14004200 -#define I2S_PHYS_ADDR 0x11000000 -#define UART0_PHYS_ADDR 0x11100000 -#define UART1_PHYS_ADDR 0x11200000 -#define UART2_PHYS_ADDR 0x11300000 -#define UART3_PHYS_ADDR 0x11400000 #define SSI0_PHYS_ADDR 0x11600000 #define SSI1_PHYS_ADDR 0x11680000 -#define SYS_PHYS_ADDR 0x11900000 #define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL #define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL #define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL @@ -672,30 +729,8 @@ enum soc_au1200_ints { #ifdef CONFIG_SOC_AU1500 #define MEM_PHYS_ADDR 0x14000000 #define STATIC_MEM_PHYS_ADDR 0x14001000 -#define DMA0_PHYS_ADDR 0x14002000 -#define DMA1_PHYS_ADDR 0x14002100 -#define DMA2_PHYS_ADDR 0x14002200 -#define DMA3_PHYS_ADDR 0x14002300 -#define DMA4_PHYS_ADDR 0x14002400 -#define DMA5_PHYS_ADDR 0x14002500 -#define DMA6_PHYS_ADDR 0x14002600 -#define DMA7_PHYS_ADDR 0x14002700 -#define IC0_PHYS_ADDR 0x10400000 -#define IC1_PHYS_ADDR 0x11800000 -#define AC97_PHYS_ADDR 0x10000000 #define USBH_PHYS_ADDR 0x10100000 -#define USBD_PHYS_ADDR 0x10200000 #define PCI_PHYS_ADDR 0x14005000 -#define MAC0_PHYS_ADDR 0x11500000 -#define MAC1_PHYS_ADDR 0x11510000 -#define MACEN_PHYS_ADDR 0x11520000 -#define MACDMA0_PHYS_ADDR 0x14004000 -#define MACDMA1_PHYS_ADDR 0x14004200 -#define I2S_PHYS_ADDR 0x11000000 -#define UART0_PHYS_ADDR 0x11100000 -#define UART3_PHYS_ADDR 0x11400000 -#define GPIO2_PHYS_ADDR 0x11700000 -#define SYS_PHYS_ADDR 0x11900000 #define PCI_MEM_PHYS_ADDR 0x400000000ULL #define PCI_IO_PHYS_ADDR 0x500000000ULL #define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL @@ -710,34 +745,10 @@ enum soc_au1200_ints { #ifdef CONFIG_SOC_AU1100 #define MEM_PHYS_ADDR 0x14000000 #define STATIC_MEM_PHYS_ADDR 0x14001000 -#define DMA0_PHYS_ADDR 0x14002000 -#define DMA1_PHYS_ADDR 0x14002100 -#define DMA2_PHYS_ADDR 0x14002200 -#define DMA3_PHYS_ADDR 0x14002300 -#define DMA4_PHYS_ADDR 0x14002400 -#define DMA5_PHYS_ADDR 0x14002500 -#define DMA6_PHYS_ADDR 0x14002600 -#define DMA7_PHYS_ADDR 0x14002700 -#define IC0_PHYS_ADDR 0x10400000 -#define SD0_PHYS_ADDR 0x10600000 -#define SD1_PHYS_ADDR 0x10680000 -#define IC1_PHYS_ADDR 0x11800000 -#define AC97_PHYS_ADDR 0x10000000 #define USBH_PHYS_ADDR 0x10100000 -#define USBD_PHYS_ADDR 0x10200000 #define IRDA_PHYS_ADDR 0x10300000 -#define MAC0_PHYS_ADDR 0x10500000 -#define MACEN_PHYS_ADDR 0x10520000 -#define MACDMA0_PHYS_ADDR 0x14004000 -#define MACDMA1_PHYS_ADDR 0x14004200 -#define I2S_PHYS_ADDR 0x11000000 -#define UART0_PHYS_ADDR 0x11100000 -#define UART1_PHYS_ADDR 0x11200000 -#define UART3_PHYS_ADDR 0x11400000 #define SSI0_PHYS_ADDR 0x11600000 #define SSI1_PHYS_ADDR 0x11680000 -#define GPIO2_PHYS_ADDR 0x11700000 -#define SYS_PHYS_ADDR 0x11900000 #define LCD_PHYS_ADDR 0x15000000 #define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL #define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL @@ -749,22 +760,8 @@ enum soc_au1200_ints { #ifdef CONFIG_SOC_AU1550 #define MEM_PHYS_ADDR 0x14000000 #define STATIC_MEM_PHYS_ADDR 0x14001000 -#define IC0_PHYS_ADDR 0x10400000 -#define IC1_PHYS_ADDR 0x11800000 #define USBH_PHYS_ADDR 0x14020000 -#define USBD_PHYS_ADDR 0x10200000 #define PCI_PHYS_ADDR 0x14005000 -#define MAC0_PHYS_ADDR 0x10500000 -#define MAC1_PHYS_ADDR 0x10510000 -#define MACEN_PHYS_ADDR 0x10520000 -#define MACDMA0_PHYS_ADDR 0x14004000 -#define MACDMA1_PHYS_ADDR 0x14004200 -#define UART0_PHYS_ADDR 0x11100000 -#define UART1_PHYS_ADDR 0x11200000 -#define UART3_PHYS_ADDR 0x11400000 -#define GPIO2_PHYS_ADDR 0x11700000 -#define SYS_PHYS_ADDR 0x11900000 -#define DDMA_PHYS_ADDR 0x14002000 #define PE_PHYS_ADDR 0x14008000 #define PSC0_PHYS_ADDR 0x11A00000 #define PSC1_PHYS_ADDR 0x11B00000 @@ -786,19 +783,10 @@ enum soc_au1200_ints { #define STATIC_MEM_PHYS_ADDR 0x14001000 #define AES_PHYS_ADDR 0x10300000 #define CIM_PHYS_ADDR 0x14004000 -#define IC0_PHYS_ADDR 0x10400000 -#define IC1_PHYS_ADDR 0x11800000 #define USBM_PHYS_ADDR 0x14020000 #define USBH_PHYS_ADDR 0x14020100 -#define UART0_PHYS_ADDR 0x11100000 -#define UART1_PHYS_ADDR 0x11200000 -#define GPIO2_PHYS_ADDR 0x11700000 -#define SYS_PHYS_ADDR 0x11900000 -#define DDMA_PHYS_ADDR 0x14002000 #define PSC0_PHYS_ADDR 0x11A00000 #define PSC1_PHYS_ADDR 0x11B00000 -#define SD0_PHYS_ADDR 0x10600000 -#define SD1_PHYS_ADDR 0x10680000 #define LCD_PHYS_ADDR 0x15000000 #define SWCNT_PHYS_ADDR 0x1110010C #define MAEFE_PHYS_ADDR 0x14012000 @@ -835,183 +823,43 @@ enum soc_au1200_ints { #endif -/* Interrupt Controller register offsets */ -#define IC_CFG0RD 0x40 -#define IC_CFG0SET 0x40 -#define IC_CFG0CLR 0x44 -#define IC_CFG1RD 0x48 -#define IC_CFG1SET 0x48 -#define IC_CFG1CLR 0x4C -#define IC_CFG2RD 0x50 -#define IC_CFG2SET 0x50 -#define IC_CFG2CLR 0x54 -#define IC_REQ0INT 0x54 -#define IC_SRCRD 0x58 -#define IC_SRCSET 0x58 -#define IC_SRCCLR 0x5C -#define IC_REQ1INT 0x5C -#define IC_ASSIGNRD 0x60 -#define IC_ASSIGNSET 0x60 -#define IC_ASSIGNCLR 0x64 -#define IC_WAKERD 0x68 -#define IC_WAKESET 0x68 -#define IC_WAKECLR 0x6C -#define IC_MASKRD 0x70 -#define IC_MASKSET 0x70 -#define IC_MASKCLR 0x74 -#define IC_RISINGRD 0x78 -#define IC_RISINGCLR 0x78 -#define IC_FALLINGRD 0x7C -#define IC_FALLINGCLR 0x7C -#define IC_TESTBIT 0x80 - - -/* Interrupt Controller 0 */ -#define IC0_CFG0RD 0xB0400040 -#define IC0_CFG0SET 0xB0400040 -#define IC0_CFG0CLR 0xB0400044 - -#define IC0_CFG1RD 0xB0400048 -#define IC0_CFG1SET 0xB0400048 -#define IC0_CFG1CLR 0xB040004C - -#define IC0_CFG2RD 0xB0400050 -#define IC0_CFG2SET 0xB0400050 -#define IC0_CFG2CLR 0xB0400054 - -#define IC0_REQ0INT 0xB0400054 -#define IC0_SRCRD 0xB0400058 -#define IC0_SRCSET 0xB0400058 -#define IC0_SRCCLR 0xB040005C -#define IC0_REQ1INT 0xB040005C - -#define IC0_ASSIGNRD 0xB0400060 -#define IC0_ASSIGNSET 0xB0400060 -#define IC0_ASSIGNCLR 0xB0400064 - -#define IC0_WAKERD 0xB0400068 -#define IC0_WAKESET 0xB0400068 -#define IC0_WAKECLR 0xB040006C - -#define IC0_MASKRD 0xB0400070 -#define IC0_MASKSET 0xB0400070 -#define IC0_MASKCLR 0xB0400074 - -#define IC0_RISINGRD 0xB0400078 -#define IC0_RISINGCLR 0xB0400078 -#define IC0_FALLINGRD 0xB040007C -#define IC0_FALLINGCLR 0xB040007C - -#define IC0_TESTBIT 0xB0400080 - -/* Interrupt Controller 1 */ -#define IC1_CFG0RD 0xB1800040 -#define IC1_CFG0SET 0xB1800040 -#define IC1_CFG0CLR 0xB1800044 - -#define IC1_CFG1RD 0xB1800048 -#define IC1_CFG1SET 0xB1800048 -#define IC1_CFG1CLR 0xB180004C - -#define IC1_CFG2RD 0xB1800050 -#define IC1_CFG2SET 0xB1800050 -#define IC1_CFG2CLR 0xB1800054 - -#define IC1_REQ0INT 0xB1800054 -#define IC1_SRCRD 0xB1800058 -#define IC1_SRCSET 0xB1800058 -#define IC1_SRCCLR 0xB180005C -#define IC1_REQ1INT 0xB180005C - -#define IC1_ASSIGNRD 0xB1800060 -#define IC1_ASSIGNSET 0xB1800060 -#define IC1_ASSIGNCLR 0xB1800064 - -#define IC1_WAKERD 0xB1800068 -#define IC1_WAKESET 0xB1800068 -#define IC1_WAKECLR 0xB180006C - -#define IC1_MASKRD 0xB1800070 -#define IC1_MASKSET 0xB1800070 -#define IC1_MASKCLR 0xB1800074 - -#define IC1_RISINGRD 0xB1800078 -#define IC1_RISINGCLR 0xB1800078 -#define IC1_FALLINGRD 0xB180007C -#define IC1_FALLINGCLR 0xB180007C - -#define IC1_TESTBIT 0xB1800080 /* Au1000 */ #ifdef CONFIG_SOC_AU1000 -#define UART0_ADDR 0xB1100000 -#define UART3_ADDR 0xB1400000 - #define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ #define USB_HOST_CONFIG 0xB017FFFC #define FOR_PLATFORM_C_USB_HOST_INT AU1000_USB_HOST_INT - -#define AU1000_ETH0_BASE 0xB0500000 -#define AU1000_ETH1_BASE 0xB0510000 -#define AU1000_MAC0_ENABLE 0xB0520000 -#define AU1000_MAC1_ENABLE 0xB0520004 -#define NUM_ETH_INTERFACES 2 #endif /* CONFIG_SOC_AU1000 */ /* Au1500 */ #ifdef CONFIG_SOC_AU1500 -#define UART0_ADDR 0xB1100000 -#define UART3_ADDR 0xB1400000 - #define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ #define USB_HOST_CONFIG 0xB017fffc #define FOR_PLATFORM_C_USB_HOST_INT AU1500_USB_HOST_INT - -#define AU1500_ETH0_BASE 0xB1500000 -#define AU1500_ETH1_BASE 0xB1510000 -#define AU1500_MAC0_ENABLE 0xB1520000 -#define AU1500_MAC1_ENABLE 0xB1520004 -#define NUM_ETH_INTERFACES 2 #endif /* CONFIG_SOC_AU1500 */ /* Au1100 */ #ifdef CONFIG_SOC_AU1100 -#define UART0_ADDR 0xB1100000 -#define UART3_ADDR 0xB1400000 - #define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ #define USB_HOST_CONFIG 0xB017FFFC #define FOR_PLATFORM_C_USB_HOST_INT AU1100_USB_HOST_INT - -#define AU1100_ETH0_BASE 0xB0500000 -#define AU1100_MAC0_ENABLE 0xB0520000 -#define NUM_ETH_INTERFACES 1 #endif /* CONFIG_SOC_AU1100 */ #ifdef CONFIG_SOC_AU1550 -#define UART0_ADDR 0xB1100000 #define USB_OHCI_BASE 0x14020000 /* phys addr for ioremap */ #define USB_OHCI_LEN 0x00060000 #define USB_HOST_CONFIG 0xB4027ffc #define FOR_PLATFORM_C_USB_HOST_INT AU1550_USB_HOST_INT - -#define AU1550_ETH0_BASE 0xB0500000 -#define AU1550_ETH1_BASE 0xB0510000 -#define AU1550_MAC0_ENABLE 0xB0520000 -#define AU1550_MAC1_ENABLE 0xB0520004 -#define NUM_ETH_INTERFACES 2 #endif /* CONFIG_SOC_AU1550 */ #ifdef CONFIG_SOC_AU1200 -#define UART0_ADDR 0xB1100000 - #define USB_UOC_BASE 0x14020020 #define USB_UOC_LEN 0x20 #define USB_OHCI_BASE 0x14020100 @@ -1504,22 +1352,6 @@ enum soc_au1200_ints { #define SYS_PINFUNC_S1B (1 << 2) #endif -#define SYS_TRIOUTRD 0xB1900100 -#define SYS_TRIOUTCLR 0xB1900100 -#define SYS_OUTPUTRD 0xB1900108 -#define SYS_OUTPUTSET 0xB1900108 -#define SYS_OUTPUTCLR 0xB190010C -#define SYS_PINSTATERD 0xB1900110 -#define SYS_PININPUTEN 0xB1900110 - -/* GPIO2, Au1500, Au1550 only */ -#define GPIO2_BASE 0xB1700000 -#define GPIO2_DIR (GPIO2_BASE + 0) -#define GPIO2_OUTPUT (GPIO2_BASE + 8) -#define GPIO2_PINSTATE (GPIO2_BASE + 0xC) -#define GPIO2_INTENABLE (GPIO2_BASE + 0x10) -#define GPIO2_ENABLE (GPIO2_BASE + 0x14) - /* Power Management */ #define SYS_SCRATCH0 0xB1900018 #define SYS_SCRATCH1 0xB190001C @@ -1635,12 +1467,6 @@ enum soc_au1200_ints { # define AC97C_RS (1 << 1) # define AC97C_CE (1 << 0) -/* Secure Digital (SD) Controller */ -#define SD0_XMIT_FIFO 0xB0600000 -#define SD0_RECV_FIFO 0xB0600004 -#define SD1_XMIT_FIFO 0xB0680000 -#define SD1_RECV_FIFO 0xB0680004 - #if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) /* Au1500 PCI Controller */ #define Au1500_CFG_BASE 0xB4005000 /* virtual, KSEG1 addr */ diff --git a/arch/mips/include/asm/mach-au1x00/au1000_dma.h b/arch/mips/include/asm/mach-au1x00/au1000_dma.h index c333b4e..59f5b55 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000_dma.h +++ b/arch/mips/include/asm/mach-au1x00/au1000_dma.h @@ -37,10 +37,6 @@ #define NUM_AU1000_DMA_CHANNELS 8 -/* DMA Channel Base Addresses */ -#define DMA_CHANNEL_BASE 0xB4002000 -#define DMA_CHANNEL_LEN 0x00000100 - /* DMA Channel Register Offsets */ #define DMA_MODE_SET 0x00000000 #define DMA_MODE_READ DMA_MODE_SET diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h index c8a553a3..2fdacfe 100644 --- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h @@ -37,14 +37,6 @@ #ifndef _LANGUAGE_ASSEMBLY -/* - * The DMA base addresses. - * The channels are every 256 bytes (0x0100) from the channel 0 base. - * Interrupt status/enable is bits 15:0 for channels 15 to zero. - */ -#define DDMA_GLOBAL_BASE 0xb4003000 -#define DDMA_CHANNEL_BASE 0xb4002000 - typedef volatile struct dbdma_global { u32 ddma_config; u32 ddma_intstat; diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h index 62d2f13..1f41a52 100644 --- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h +++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h @@ -24,6 +24,23 @@ #define MAKE_IRQ(intc, off) (AU1000_INTC##intc##_INT_BASE + (off)) +/* GPIO1 registers within SYS_ area */ +#define SYS_TRIOUTRD 0x100 +#define SYS_TRIOUTCLR 0x100 +#define SYS_OUTPUTRD 0x108 +#define SYS_OUTPUTSET 0x108 +#define SYS_OUTPUTCLR 0x10C +#define SYS_PINSTATERD 0x110 +#define SYS_PININPUTEN 0x110 + +/* register offsets within GPIO2 block */ +#define GPIO2_DIR 0x00 +#define GPIO2_OUTPUT 0x08 +#define GPIO2_PINSTATE 0x0C +#define GPIO2_INTENABLE 0x10 +#define GPIO2_ENABLE 0x14 + +struct gpio; static inline int au1000_gpio1_to_irq(int gpio) { @@ -200,23 +217,26 @@ static inline int au1200_irq_to_gpio(int irq) */ static inline void alchemy_gpio1_set_value(int gpio, int v) { + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE); unsigned long r = v ? SYS_OUTPUTSET : SYS_OUTPUTCLR; - au_writel(mask, r); - au_sync(); + __raw_writel(mask, base + r); + wmb(); } static inline int alchemy_gpio1_get_value(int gpio) { + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE); - return au_readl(SYS_PINSTATERD) & mask; + return __raw_readl(base + SYS_PINSTATERD) & mask; } static inline int alchemy_gpio1_direction_input(int gpio) { + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); unsigned long mask = 1 << (gpio - ALCHEMY_GPIO1_BASE); - au_writel(mask, SYS_TRIOUTCLR); - au_sync(); + __raw_writel(mask, base + SYS_TRIOUTCLR); + wmb(); return 0; } @@ -257,27 +277,31 @@ static inline int alchemy_gpio1_to_irq(int gpio) */ static inline void __alchemy_gpio2_mod_dir(int gpio, int to_out) { + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); unsigned long mask = 1 << (gpio - ALCHEMY_GPIO2_BASE); - unsigned long d = au_readl(GPIO2_DIR); + unsigned long d = __raw_readl(base + GPIO2_DIR); + if (to_out) d |= mask; else d &= ~mask; - au_writel(d, GPIO2_DIR); - au_sync(); + __raw_writel(d, base + GPIO2_DIR); + wmb(); } static inline void alchemy_gpio2_set_value(int gpio, int v) { + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); unsigned long mask; mask = ((v) ? 0x00010001 : 0x00010000) << (gpio - ALCHEMY_GPIO2_BASE); - au_writel(mask, GPIO2_OUTPUT); - au_sync(); + __raw_writel(mask, base + GPIO2_OUTPUT); + wmb(); } static inline int alchemy_gpio2_get_value(int gpio) { - return au_readl(GPIO2_PINSTATE) & (1 << (gpio - ALCHEMY_GPIO2_BASE)); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); + return __raw_readl(base + GPIO2_PINSTATE) & (1 << (gpio - ALCHEMY_GPIO2_BASE)); } static inline int alchemy_gpio2_direction_input(int gpio) @@ -329,21 +353,23 @@ static inline int alchemy_gpio2_to_irq(int gpio) */ static inline void alchemy_gpio1_input_enable(void) { - au_writel(0, SYS_PININPUTEN); /* the write op is key */ - au_sync(); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); + __raw_writel(0, base + SYS_PININPUTEN); /* the write op is key */ + wmb(); } /* GPIO2 shared interrupts and control */ static inline void __alchemy_gpio2_mod_int(int gpio2, int en) { - unsigned long r = au_readl(GPIO2_INTENABLE); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); + unsigned long r = __raw_readl(base + GPIO2_INTENABLE); if (en) r |= 1 << gpio2; else r &= ~(1 << gpio2); - au_writel(r, GPIO2_INTENABLE); - au_sync(); + __raw_writel(r, base + GPIO2_INTENABLE); + wmb(); } /** @@ -418,10 +444,11 @@ static inline void alchemy_gpio2_disable_int(int gpio2) */ static inline void alchemy_gpio2_enable(void) { - au_writel(3, GPIO2_ENABLE); /* reset, clock enabled */ - au_sync(); - au_writel(1, GPIO2_ENABLE); /* clock enabled */ - au_sync(); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); + __raw_writel(3, base + GPIO2_ENABLE); /* reset, clock enabled */ + wmb(); + __raw_writel(1, base + GPIO2_ENABLE); /* clock enabled */ + wmb(); } /** @@ -431,8 +458,9 @@ static inline void alchemy_gpio2_enable(void) */ static inline void alchemy_gpio2_disable(void) { - au_writel(2, GPIO2_ENABLE); /* reset, clock disabled */ - au_sync(); + void __iomem *base = (void __iomem *)KSEG1ADDR(AU1500_GPIO2_PHYS_ADDR); + __raw_writel(2, base + GPIO2_ENABLE); /* reset, clock disabled */ + wmb(); } /**********************************************************************/ @@ -556,6 +584,16 @@ static inline void gpio_set_value(int gpio, int v) alchemy_gpio_set_value(gpio, v); } +static inline int gpio_get_value_cansleep(unsigned gpio) +{ + return gpio_get_value(gpio); +} + +static inline void gpio_set_value_cansleep(unsigned gpio, int value) +{ + gpio_set_value(gpio, value); +} + static inline int gpio_is_valid(int gpio) { return alchemy_gpio_is_valid(gpio); @@ -581,10 +619,50 @@ static inline int gpio_request(unsigned gpio, const char *label) return 0; } +static inline int gpio_request_one(unsigned gpio, + unsigned long flags, const char *label) +{ + return 0; +} + +static inline int gpio_request_array(struct gpio *array, size_t num) +{ + return 0; +} + static inline void gpio_free(unsigned gpio) { } +static inline void gpio_free_array(struct gpio *array, size_t num) +{ +} + +static inline int gpio_set_debounce(unsigned gpio, unsigned debounce) +{ + return -ENOSYS; +} + +static inline int gpio_export(unsigned gpio, bool direction_may_change) +{ + return -ENOSYS; +} + +static inline int gpio_export_link(struct device *dev, const char *name, + unsigned gpio) +{ + return -ENOSYS; +} + +static inline int gpio_sysfs_set_active_low(unsigned gpio, int value) +{ + return -ENOSYS; +} + +static inline void gpio_unexport(unsigned gpio) +{ +} + #endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */ |
