diff options
Diffstat (limited to 'arch/mips/galileo-boards/ev96100/setup.c')
| -rw-r--r-- | arch/mips/galileo-boards/ev96100/setup.c | 159 |
1 files changed, 0 insertions, 159 deletions
diff --git a/arch/mips/galileo-boards/ev96100/setup.c b/arch/mips/galileo-boards/ev96100/setup.c deleted file mode 100644 index 639ad55..0000000 --- a/arch/mips/galileo-boards/ev96100/setup.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Galileo EV96100 setup. - * - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * This file was derived from Carsten Langgaard's - * arch/mips/mips-boards/atlas/atlas_setup.c. - * - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/string.h> -#include <linux/ctype.h> -#include <linux/pci.h> - -#include <asm/cpu.h> -#include <asm/bootinfo.h> -#include <asm/mipsregs.h> -#include <asm/irq.h> -#include <asm/delay.h> -#include <asm/gt64120.h> -#include <asm/galileo-boards/ev96100int.h> - - -extern char *__init prom_getcmdline(void); - -extern void mips_reboot_setup(void); - -unsigned char mac_0_1[12]; - -void __init plat_mem_setup(void) -{ - unsigned int config = read_c0_config(); - unsigned int status = read_c0_status(); - unsigned int info = read_c0_info(); - u32 tmp; - - char *argptr; - - clear_c0_status(ST0_FR); - - if (config & 0x8) - printk("Secondary cache is enabled\n"); - else - printk("Secondary cache is disabled\n"); - - if (status & (1 << 27)) - printk("User-mode cache ops enabled\n"); - else - printk("User-mode cache ops disabled\n"); - - printk("CP0 info reg: %x\n", (unsigned) info); - if (info & (1 << 28)) - printk("burst mode Scache RAMS\n"); - else - printk("pipelined Scache RAMS\n"); - - if (info & 0x1) - printk("Atomic Enable is set\n"); - - argptr = prom_getcmdline(); -#ifdef CONFIG_SERIAL_CONSOLE - if (strstr(argptr, "console=") == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif - - mips_reboot_setup(); - - set_io_port_base(KSEG1); - ioport_resource.start = GT_PCI_IO_BASE; - ioport_resource.end = GT_PCI_IO_BASE + 0x01ffffff; - -#ifdef CONFIG_BLK_DEV_INITRD - ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0); -#endif - - - /* - * Setup GT controller master bit so we can do config cycles - */ - - /* Clear cause register bits */ - GT_WRITE(GT_INTRCAUSE_OFS, ~(GT_INTRCAUSE_MASABORT0_BIT | - GT_INTRCAUSE_TARABORT0_BIT)); - /* Setup address */ - GT_WRITE(GT_PCI0_CFGADDR_OFS, - (0 << GT_PCI0_CFGADDR_BUSNUM_SHF) | - (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | - ((PCI_COMMAND / 4) << GT_PCI0_CFGADDR_REGNUM_SHF) | - GT_PCI0_CFGADDR_CONFIGEN_BIT); - - udelay(2); - tmp = GT_READ(GT_PCI0_CFGDATA_OFS); - - tmp |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER | PCI_COMMAND_SERR); - GT_WRITE(GT_PCI0_CFGADDR_OFS, - (0 << GT_PCI0_CFGADDR_BUSNUM_SHF) | - (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | - ((PCI_COMMAND / 4) << GT_PCI0_CFGADDR_REGNUM_SHF) | - GT_PCI0_CFGADDR_CONFIGEN_BIT); - udelay(2); - GT_WRITE(GT_PCI0_CFGDATA_OFS, tmp); - - /* Setup address */ - GT_WRITE(GT_PCI0_CFGADDR_OFS, - (0 << GT_PCI0_CFGADDR_BUSNUM_SHF) | - (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | - ((PCI_COMMAND / 4) << GT_PCI0_CFGADDR_REGNUM_SHF) | - GT_PCI0_CFGADDR_CONFIGEN_BIT); - - udelay(2); - tmp = GT_READ(GT_PCI0_CFGDATA_OFS); -} - -unsigned short get_gt_devid(void) -{ - u32 gt_devid; - - /* Figure out if this is a gt96100 or gt96100A */ - GT_WRITE(GT_PCI0_CFGADDR_OFS, - (0 << GT_PCI0_CFGADDR_BUSNUM_SHF) | - (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | - ((PCI_VENDOR_ID / 4) << GT_PCI0_CFGADDR_REGNUM_SHF) | - GT_PCI0_CFGADDR_CONFIGEN_BIT); - - udelay(4); - gt_devid = GT_READ(GT_PCI0_CFGDATA_OFS); - - return gt_devid >> 16; -} |
