diff options
Diffstat (limited to 'arch/mips/cobalt/setup.c')
| -rw-r--r-- | arch/mips/cobalt/setup.c | 97 |
1 files changed, 32 insertions, 65 deletions
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c index a4b69b5..d0dd817 100644 --- a/arch/mips/cobalt/setup.c +++ b/arch/mips/cobalt/setup.c @@ -19,12 +19,10 @@ #include <asm/bootinfo.h> #include <asm/time.h> #include <asm/io.h> -#include <asm/irq.h> -#include <asm/processor.h> #include <asm/reboot.h> #include <asm/gt64120.h> -#include <asm/mach-cobalt/cobalt.h> +#include <cobalt.h> extern void cobalt_machine_restart(char *command); extern void cobalt_machine_halt(void); @@ -63,61 +61,38 @@ void __init plat_timer_setup(struct irqaction *irq) GT_WRITE(GT_INTRMASK_OFS, GT_INTR_T0EXP_MSK | GT_READ(GT_INTRMASK_OFS)); } -extern struct pci_ops gt64111_pci_ops; - -static struct resource cobalt_mem_resource = { - .start = GT_DEF_PCI0_MEM0_BASE, - .end = GT_DEF_PCI0_MEM0_BASE + GT_DEF_PCI0_MEM0_SIZE - 1, - .name = "PCI memory", - .flags = IORESOURCE_MEM -}; - -static struct resource cobalt_io_resource = { - .start = 0x1000, - .end = 0xffff, - .name = "PCI I/O", - .flags = IORESOURCE_IO -}; - -static struct resource cobalt_io_resources[] = { - { +/* + * Cobalt doesn't have PS/2 keyboard/mouse interfaces, + * keyboard conntroller is never used. + * Also PCI-ISA bridge DMA contoroller is never used. + */ +static struct resource cobalt_reserved_resources[] = { + { /* dma1 */ .start = 0x00, .end = 0x1f, - .name = "dma1", - .flags = IORESOURCE_BUSY - }, { - .start = 0x40, - .end = 0x5f, - .name = "timer", - .flags = IORESOURCE_BUSY - }, { + .name = "reserved", + .flags = IORESOURCE_BUSY | IORESOURCE_IO, + }, + { /* keyboard */ .start = 0x60, .end = 0x6f, - .name = "keyboard", - .flags = IORESOURCE_BUSY - }, { + .name = "reserved", + .flags = IORESOURCE_BUSY | IORESOURCE_IO, + }, + { /* dma page reg */ .start = 0x80, .end = 0x8f, - .name = "dma page reg", - .flags = IORESOURCE_BUSY - }, { + .name = "reserved", + .flags = IORESOURCE_BUSY | IORESOURCE_IO, + }, + { /* dma2 */ .start = 0xc0, .end = 0xdf, - .name = "dma2", - .flags = IORESOURCE_BUSY + .name = "reserved", + .flags = IORESOURCE_BUSY | IORESOURCE_IO, }, }; -#define COBALT_IO_RESOURCES (sizeof(cobalt_io_resources)/sizeof(struct resource)) - -static struct pci_controller cobalt_pci_controller = { - .pci_ops = >64111_pci_ops, - .mem_resource = &cobalt_mem_resource, - .mem_offset = 0, - .io_resource = &cobalt_io_resource, - .io_offset = 0 - GT_DEF_PCI0_IO_BASE, -}; - void __init plat_mem_setup(void) { static struct uart_port uart; @@ -130,12 +105,12 @@ void __init plat_mem_setup(void) set_io_port_base(CKSEG1ADDR(GT_DEF_PCI0_IO_BASE)); - /* I/O port resource must include UART and LCD/buttons */ + /* I/O port resource must include LCD/buttons */ ioport_resource.end = 0x0fffffff; - /* request I/O space for devices used on all i[345]86 PCs */ - for (i = 0; i < COBALT_IO_RESOURCES; i++) - request_resource(&ioport_resource, cobalt_io_resources + i); + /* These resources have been reserved by VIA SuperI/O chip. */ + for (i = 0; i < ARRAY_SIZE(cobalt_reserved_resources); i++) + request_resource(&ioport_resource, cobalt_reserved_resources + i); /* Read the cobalt id register out of the PCI config space */ PCI_CFG_SET(devfn, (VIA_COBALT_BRD_ID_REG & ~0x3)); @@ -145,28 +120,20 @@ void __init plat_mem_setup(void) printk("Cobalt board ID: %d\n", cobalt_board_id); -#ifdef CONFIG_PCI - register_pci_controller(&cobalt_pci_controller); -#endif - -#ifdef CONFIG_SERIAL_8250 if (cobalt_board_id > COBALT_BRD_ID_RAQ1) { - -#ifdef CONFIG_EARLY_PRINTK - cobalt_early_console(); -#endif - +#ifdef CONFIG_SERIAL_8250 uart.line = 0; uart.type = PORT_UNKNOWN; uart.uartclk = 18432000; uart.irq = COBALT_SERIAL_IRQ; - uart.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; - uart.iobase = 0xc800000; - uart.iotype = UPIO_PORT; + uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | + UPF_SKIP_TEST; + uart.iotype = UPIO_MEM; + uart.mapbase = 0x1c800000; early_serial_setup(&uart); - } #endif + } } /* |
