diff options
Diffstat (limited to 'arch/mips/alchemy/db1x00/board_setup.c')
| -rw-r--r-- | arch/mips/alchemy/db1x00/board_setup.c | 108 |
1 files changed, 108 insertions, 0 deletions
diff --git a/arch/mips/alchemy/db1x00/board_setup.c b/arch/mips/alchemy/db1x00/board_setup.c new file mode 100644 index 0000000..9e5ccbb --- /dev/null +++ b/arch/mips/alchemy/db1x00/board_setup.c @@ -0,0 +1,108 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Alchemy Db1x00 board setup. + * + * Copyright 2000, 2008 MontaVista Software Inc. + * Author: MontaVista Software, Inc. <source@mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> + +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-db1x00/db1x00.h> + +static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; + +void board_reset(void) +{ + /* Hit BCSR.SW_RESET[RESET] */ + bcsr->swreset = 0x0000; +} + +void __init board_setup(void) +{ + u32 pin_func = 0; + + /* Not valid for Au1550 */ +#if defined(CONFIG_IRDA) && \ + (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100)) + /* Set IRFIRSEL instead of GPIO15 */ + pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF; + au_writel(pin_func, SYS_PINFUNC); + /* Power off until the driver is in use */ + bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK; + bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF; + au_sync(); +#endif + bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */ + +#ifdef CONFIG_MIPS_MIRAGE + /* Enable GPIO[31:0] inputs */ + au_writel(0, SYS_PININPUTEN); + + /* GPIO[20] is output, tristate the other input primary GPIOs */ + au_writel(~(1 << 20), SYS_TRIOUTCLR); + + /* Set GPIO[210:208] instead of SSI_0 */ + pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0; + + /* Set GPIO[215:211] for LEDs */ + pin_func |= 5 << 2; + + /* Set GPIO[214:213] for more LEDs */ + pin_func |= 5 << 12; + + /* Set GPIO[207:200] instead of PCMCIA/LCD */ + pin_func |= SYS_PF_LCD | SYS_PF_PC; + au_writel(pin_func, SYS_PINFUNC); + + /* + * Enable speaker amplifier. This should + * be part of the audio driver. + */ + au_writel(au_readl(GPIO2_DIR) | 0x200, GPIO2_DIR); + au_writel(0x02000200, GPIO2_OUTPUT); +#endif + + au_sync(); + +#ifdef CONFIG_MIPS_DB1000 + printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n"); +#endif +#ifdef CONFIG_MIPS_DB1500 + printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n"); +#endif +#ifdef CONFIG_MIPS_DB1100 + printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n"); +#endif +#ifdef CONFIG_MIPS_BOSPORUS + printk(KERN_INFO "AMD Alchemy Bosporus Board\n"); +#endif +#ifdef CONFIG_MIPS_MIRAGE + printk(KERN_INFO "AMD Alchemy Mirage Board\n"); +#endif +#ifdef CONFIG_MIPS_DB1550 + printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n"); +#endif +} |
