summaryrefslogtreecommitdiffstats
path: root/arch/mips/Makefile
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/Makefile')
-rw-r--r--arch/mips/Makefile55
1 files changed, 37 insertions, 18 deletions
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 2563a08..8f57fc7 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -122,26 +122,8 @@ predef-le += -DMIPSEL -D_MIPSEL -D__MIPSEL -D__MIPSEL__
cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB $(undef-all) $(predef-be))
cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL $(undef-all) $(predef-le))
-# For smartmips configurations, there are hundreds of warnings due to ISA overrides
-# in assembly and header files. smartmips is only supported for MIPS32r1 onwards
-# and there is no support for 64-bit. Various '.set mips2' or '.set mips3' or
-# similar directives in the kernel will spam the build logs with the following warnings:
-# Warning: the `smartmips' extension requires MIPS32 revision 1 or greater
-# or
-# Warning: the 64-bit MIPS architecture does not support the `smartmips' extension
-# Pass -Wa,--no-warn to disable all assembler warnings until the kernel code has
-# been fixed properly.
-cflags-$(CONFIG_CPU_HAS_SMARTMIPS) += $(call cc-option,-msmartmips) -Wa,--no-warn
-cflags-$(CONFIG_CPU_MICROMIPS) += $(call cc-option,-mmicromips)
-
cflags-$(CONFIG_SB1XXX_CORELIS) += $(call cc-option,-mno-sched-prolog) \
-fno-omit-frame-pointer
-
-ifeq ($(CONFIG_CPU_HAS_MSA),y)
-toolchain-msa := $(call cc-option-yn,-mhard-float -mfp64 -Wa$(comma)-mmsa)
-cflags-$(toolchain-msa) += -DTOOLCHAIN_SUPPORTS_MSA
-endif
-
#
# CPU-dependent compiler/assembler options for optimization.
#
@@ -156,10 +138,12 @@ cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips32 -U_MIPS
-Wa,-mips32 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS32_R2) += $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
-Wa,-mips32r2 -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS32_R6) += -march=mips32r6 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS64_R1) += $(call cc-option,-march=mips64,-mips64 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
-Wa,-mips64 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS64_R2) += $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
-Wa,-mips64r2 -Wa,--trap
+cflags-$(CONFIG_CPU_MIPS64_R6) += -march=mips64r6 -Wa,--trap
cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap
cflags-$(CONFIG_CPU_R5432) += $(call cc-option,-march=r5400,-march=r5000) \
-Wa,--trap
@@ -182,6 +166,16 @@ cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon
endif
cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1
cflags-$(CONFIG_CPU_BMIPS) += -march=mips32 -Wa,-mips32 -Wa,--trap
+#
+# binutils from v2.25 on and gcc starting from v4.9.0 treat -march=loongson3a
+# as MIPS64 R1; older versions as just R1. This leaves the possibility open
+# that GCC might generate R2 code for -march=loongson3a which then is rejected
+# by GAS. The cc-option can't probe for this behaviour so -march=loongson3a
+# can't easily be used safely within the kbuild framework.
+#
+cflags-$(CONFIG_CPU_LOONGSON3) += \
+ $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
+ -Wa,-mips64r2 -Wa,--trap
cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,)
cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,)
@@ -194,6 +188,23 @@ KBUILD_CFLAGS_MODULE += -msb1-pass1-workarounds
endif
endif
+# For smartmips configurations, there are hundreds of warnings due to ISA overrides
+# in assembly and header files. smartmips is only supported for MIPS32r1 onwards
+# and there is no support for 64-bit. Various '.set mips2' or '.set mips3' or
+# similar directives in the kernel will spam the build logs with the following warnings:
+# Warning: the `smartmips' extension requires MIPS32 revision 1 or greater
+# or
+# Warning: the 64-bit MIPS architecture does not support the `smartmips' extension
+# Pass -Wa,--no-warn to disable all assembler warnings until the kernel code has
+# been fixed properly.
+mips-cflags := "$(cflags-y)"
+cflags-$(CONFIG_CPU_HAS_SMARTMIPS) += $(call cc-option,$(mips-cflags),-msmartmips) -Wa,--no-warn
+cflags-$(CONFIG_CPU_MICROMIPS) += $(call cc-option,$(mips-cflags),-mmicromips)
+ifeq ($(CONFIG_CPU_HAS_MSA),y)
+toolchain-msa := $(call cc-option-yn,-$(mips-cflags),mhard-float -mfp64 -Wa$(comma)-mmsa)
+cflags-$(toolchain-msa) += -DTOOLCHAIN_SUPPORTS_MSA
+endif
+
#
# Firmware support
#
@@ -287,7 +298,11 @@ boot-y += vmlinux.ecoff
boot-y += vmlinux.srec
ifeq ($(shell expr $(load-y) \< 0xffffffff80000000 2> /dev/null), 0)
boot-y += uImage
+boot-y += uImage.bin
+boot-y += uImage.bz2
boot-y += uImage.gz
+boot-y += uImage.lzma
+boot-y += uImage.lzo
endif
# compressed boot image targets (arch/mips/boot/compressed/)
@@ -386,7 +401,11 @@ define archhelp
echo ' vmlinuz.bin - Raw binary zboot image'
echo ' vmlinuz.srec - SREC zboot image'
echo ' uImage - U-Boot image'
+ echo ' uImage.bin - U-Boot image (uncompressed)'
+ echo ' uImage.bz2 - U-Boot image (bz2)'
echo ' uImage.gz - U-Boot image (gzip)'
+ echo ' uImage.lzma - U-Boot image (lzma)'
+ echo ' uImage.lzo - U-Boot image (lzo)'
echo ' dtbs - Device-tree blobs for enabled boards'
echo
echo ' These will be default as appropriate for a configured platform.'
OpenPOWER on IntegriCloud