diff options
Diffstat (limited to 'arch/mips/Kconfig')
| -rw-r--r-- | arch/mips/Kconfig | 131 |
1 files changed, 93 insertions, 38 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index a92ce6b..130d825 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -10,7 +10,6 @@ menu "Machine selection" config ZONE_DMA bool - default y choice prompt "System type" @@ -133,7 +132,7 @@ config MIPS_MIRAGE select SYS_SUPPORTS_LITTLE_ENDIAN config BASLER_EXCITE - bool "Basler eXcite smart camera support" + bool "Basler eXcite smart camera" select DMA_COHERENT select HW_HAS_PCI select IRQ_CPU @@ -144,9 +143,10 @@ config BASLER_EXCITE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_KGDB help The eXcite is a smart camera platform manufactured by - Basler Vision Technologies AG + Basler Vision Technologies AG. config BASLER_EXCITE_PROTOTYPE bool "Support for pre-release units" @@ -164,8 +164,9 @@ config MIPS_COBALT select HW_HAS_PCI select I8259 select IRQ_CPU - select MIPS_GT64111 + select PCI_GT64XXX_PCI0 select SYS_HAS_CPU_NEVADA + select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL select SYS_SUPPORTS_LITTLE_ENDIAN @@ -175,7 +176,7 @@ config MACH_DECSTATION bool "DECstations" select BOOT_ELF32 select DMA_NONCOHERENT - select EARLY_PRINTK + select SYS_HAS_EARLY_PRINTK select IRQ_CPU select SYS_HAS_CPU_R3000 select SYS_HAS_CPU_R4X00 @@ -205,11 +206,12 @@ config MIPS_EV64120 depends on EXPERIMENTAL select DMA_NONCOHERENT select HW_HAS_PCI - select MIPS_GT64120 + select PCI_GT64XXX_PCI0 select SYS_HAS_CPU_R5000 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_KGDB help This is an evaluation board based on the Galileo GT-64120 single-chip system controller that contains a MIPS R5000 compatible @@ -240,13 +242,14 @@ config MACH_JAZZ config LASAT bool "LASAT Networks platforms" select DMA_NONCOHERENT + select SYS_HAS_EARLY_PRINTK select HW_HAS_PCI - select MIPS_GT64120 + select PCI_GT64XXX_PCI0 select MIPS_NILE4 select R5000_CPU_SCACHE select SYS_HAS_CPU_R5000 select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL + select SYS_SUPPORTS_64BIT_KERNEL if BROKEN select SYS_SUPPORTS_LITTLE_ENDIAN select GENERIC_HARDIRQS_NO__DO_IRQ @@ -254,11 +257,12 @@ config MIPS_ATLAS bool "MIPS Atlas board" select BOOT_ELF32 select DMA_NONCOHERENT + select SYS_HAS_EARLY_PRINTK select IRQ_CPU select HW_HAS_PCI select MIPS_BOARDS_GEN select MIPS_BONITO64 - select MIPS_GT64120 + select PCI_GT64XXX_PCI0 select MIPS_MSC select RM7000_CPU_SCACHE select SWAP_IO_SPACE @@ -272,6 +276,7 @@ config MIPS_ATLAS select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_MULTITHREADING if EXPERIMENTAL + select SYS_SUPPORTS_SMARTMIPS select GENERIC_HARDIRQS_NO__DO_IRQ help This enables support for the MIPS Technologies Atlas evaluation @@ -290,7 +295,7 @@ config MIPS_MALTA select MIPS_BOARDS_GEN select MIPS_BONITO64 select MIPS_CPU_SCACHE - select MIPS_GT64120 + select PCI_GT64XXX_PCI0 select MIPS_MSC select SWAP_IO_SPACE select SYS_HAS_CPU_MIPS32_R1 @@ -298,11 +303,13 @@ config MIPS_MALTA select SYS_HAS_CPU_MIPS64_R1 select SYS_HAS_CPU_NEVADA select SYS_HAS_CPU_RM7000 + select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_MULTITHREADING + select SYS_SUPPORTS_SMARTMIPS help This enables support for the MIPS Technologies Malta evaluation board. @@ -312,6 +319,7 @@ config MIPS_SEAD depends on EXPERIMENTAL select IRQ_CPU select DMA_NONCOHERENT + select SYS_HAS_EARLY_PRINTK select MIPS_BOARDS_GEN select SYS_HAS_CPU_MIPS32_R1 select SYS_HAS_CPU_MIPS32_R2 @@ -320,6 +328,7 @@ config MIPS_SEAD select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_SMARTMIPS help This enables support for the MIPS Technologies SEAD evaluation board. @@ -330,7 +339,7 @@ config WR_PPMC select BOOT_ELF32 select DMA_NONCOHERENT select HW_HAS_PCI - select MIPS_GT64120 + select PCI_GT64XXX_PCI0 select SWAP_IO_SPACE select SYS_HAS_CPU_MIPS32_R1 select SYS_HAS_CPU_MIPS32_R2 @@ -348,9 +357,11 @@ config WR_PPMC config MIPS_SIM bool 'MIPS simulator (MIPSsim)' select DMA_NONCOHERENT + select SYS_HAS_EARLY_PRINTK select IRQ_CPU select SYS_HAS_CPU_MIPS32_R1 select SYS_HAS_CPU_MIPS32_R2 + select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN @@ -371,9 +382,11 @@ config MOMENCO_JAGUAR_ATX select RM7000_CPU_SCACHE select SWAP_IO_SPACE select SYS_HAS_CPU_RM9000 + select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_KGDB help The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by Momentum Computer <http://www.momenco.com/>. @@ -384,13 +397,14 @@ config MOMENCO_OCELOT select HW_HAS_PCI select IRQ_CPU select IRQ_CPU_RM7K - select MIPS_GT64120 + select PCI_GT64XXX_PCI0 select RM7000_CPU_SCACHE select SWAP_IO_SPACE select SYS_HAS_CPU_RM7000 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_KGDB help The Ocelot is a MIPS-based Single Board Computer (SBC) made by Momentum Computer <http://www.momenco.com/>. @@ -455,11 +469,6 @@ config MIPS_XXS1500 select SOC_AU1500 select SYS_SUPPORTS_LITTLE_ENDIAN -config PNX8550_V2PCI - bool "Philips PNX8550 based Viper2-PCI board" - select PNX8550 - select SYS_SUPPORTS_LITTLE_ENDIAN - config PNX8550_JBS bool "Philips PNX8550 based JBS board" select PNX8550 @@ -480,6 +489,8 @@ config DDB5477 select SYS_HAS_CPU_R5432 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL + select SYS_SUPPORTS_KGDB + select SYS_SUPPORTS_KGDB select SYS_SUPPORTS_LITTLE_ENDIAN help This enables support for the R5432-based NEC DDB Vrc-5477, @@ -489,10 +500,8 @@ config DDB5477 ether port USB, AC97, PCI, etc. config MACH_VR41XX - bool "NEC VR41XX-based machines" + bool "NEC VR4100 series based machines" select SYS_HAS_CPU_VR41XX - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL select GENERIC_HARDIRQS_NO__DO_IRQ config PMC_YOSEMITE @@ -504,10 +513,12 @@ config PMC_YOSEMITE select IRQ_CPU_RM9K select SWAP_IO_SPACE select SYS_HAS_CPU_RM9000 + select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_KGDB select SYS_SUPPORTS_SMP help Yosemite is an evaluation board for the RM9000x2 processor @@ -528,6 +539,8 @@ config QEMU select SYS_SUPPORTS_LITTLE_ENDIAN select ARCH_SPARSEMEM_ENABLE select GENERIC_HARDIRQS_NO__DO_IRQ + select NR_CPUS_DEFAULT_1 + select SYS_SUPPORTS_SMP help Qemu is a software emulator which among other architectures also can simulate a MIPS32 4Kc system. This patch adds support for the @@ -563,6 +576,7 @@ config SGI_IP22 select SWAP_IO_SPACE select SYS_HAS_CPU_R4X00 select SYS_HAS_CPU_R5000 + select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN @@ -577,13 +591,14 @@ config SGI_IP27 select ARC64 select BOOT_ELF64 select DMA_IP27 - select EARLY_PRINTK + select SYS_HAS_EARLY_PRINTK select HW_HAS_PCI select NR_CPUS_DEFAULT_64 select PCI_DOMAINS select SYS_HAS_CPU_R10000 select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_KGDB select SYS_SUPPORTS_NUMA select SYS_SUPPORTS_SMP select GENERIC_HARDIRQS_NO__DO_IRQ @@ -633,6 +648,7 @@ config SIBYTE_SWARM select SYS_HAS_CPU_SB1 select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_KGDB select SYS_SUPPORTS_LITTLE_ENDIAN config SIBYTE_SENTOSA @@ -726,16 +742,18 @@ config SNI_RM select BOOT_ELF32 select DMA_NONCOHERENT select GENERIC_ISA_DMA - select HAVE_STD_PC_SERIAL_PORT select HW_HAS_EISA select HW_HAS_PCI + select IRQ_CPU select I8253 select I8259 select ISA select SWAP_IO_SPACE if CPU_BIG_ENDIAN select SYS_HAS_CPU_R4X00 select SYS_HAS_CPU_R5000 + select SYS_HAS_CPU_R10000 select R5000_CPU_SCACHE + select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL select SYS_SUPPORTS_BIG_ENDIAN @@ -758,6 +776,7 @@ config TOSHIBA_JMR3927 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN select TOSHIBA_BOARDS + select GENERIC_HARDIRQS_NO__DO_IRQ config TOSHIBA_RBTX4927 bool "Toshiba TBTX49[23]7 board" @@ -772,6 +791,7 @@ config TOSHIBA_RBTX4927 select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_KGDB select TOSHIBA_BOARDS select GENERIC_HARDIRQS_NO__DO_IRQ help @@ -792,6 +812,7 @@ config TOSHIBA_RBTX4938 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_KGDB select TOSHIBA_BOARDS select GENERIC_HARDIRQS_NO__DO_IRQ help @@ -812,7 +833,6 @@ source "arch/mips/tx4927/Kconfig" source "arch/mips/tx4938/Kconfig" source "arch/mips/vr41xx/Kconfig" source "arch/mips/philips/pnx8550/common/Kconfig" -source "arch/mips/cobalt/Kconfig" endmenu @@ -882,10 +902,25 @@ config DMA_NEED_PCI_MAP_STATE bool config EARLY_PRINTK + bool "Early printk" if EMBEDDED && DEBUG_KERNEL + depends on SYS_HAS_EARLY_PRINTK + default y + help + This option enables special console drivers which allow the kernel + to print messages very early in the bootup process. + + This is useful for kernel debugging when your machine crashes very + early before the console code is initialized. For normal operation + it is not recommended because it looks on some machines ugly and + oesn't cooperate with an X server. You should normally N here, + unless you want to debug such a crash. + +config SYS_HAS_EARLY_PRINTK bool config GENERIC_ISA_DMA bool + select ZONE_DMA config I8259 bool @@ -909,6 +944,7 @@ config MIPS_DISABLE_OBSOLETE_IDE config GENERIC_ISA_DMA_SUPPORT_BROKEN bool + select ZONE_DMA # # Endianess selection. Sufficiently obscure so many users don't know what to @@ -958,14 +994,12 @@ config IRQ_MV64340 config DDB5XXX_COMMON bool + select SYS_SUPPORTS_KGDB config MIPS_BOARDS_GEN bool -config MIPS_GT64111 - bool - -config MIPS_GT64120 +config PCI_GT64XXX_PCI0 bool config MIPS_TX3927 @@ -1006,6 +1040,7 @@ config SOC_AU1X00 select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_APM_EMULATION + select SYS_SUPPORTS_KGDB config PNX8550 bool @@ -1016,8 +1051,10 @@ config SOC_PNX8550 select DMA_NONCOHERENT select HW_HAS_PCI select SYS_HAS_CPU_MIPS32_R1 + select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select GENERIC_HARDIRQS_NO__DO_IRQ + select SYS_SUPPORTS_KGDB config SWAP_IO_SPACE bool @@ -1066,7 +1103,7 @@ config BOOT_ELF32 config MIPS_L1_CACHE_SHIFT int - default "4" if MACH_DECSTATION + default "4" if MACH_DECSTATION || SNI_RM default "7" if SGI_IP27 default "5" @@ -1075,7 +1112,7 @@ config HAVE_STD_PC_SERIAL_PORT config ARC_CONSOLE bool "ARC console support" - depends on SGI_IP22 || SNI_RM + depends on SGI_IP22 || (SNI_RM && CPU_LITTLE_ENDIAN) config ARC_MEMORY bool @@ -1521,6 +1558,7 @@ config MIPS_MT_SMP select CPU_MIPSR2_IRQ_VI select CPU_MIPSR2_SRS select MIPS_MT + select NR_CPUS_DEFAULT_2 select SMP select SYS_SUPPORTS_SMP help @@ -1535,7 +1573,6 @@ config MIPS_MT_SMTC select CPU_MIPSR2_IRQ_VI select CPU_MIPSR2_SRS select MIPS_MT - select NR_CPUS_DEFAULT_2 select NR_CPUS_DEFAULT_8 select SMP select SYS_SUPPORTS_SMP @@ -1566,7 +1603,7 @@ config MIPS_MT_FPAFF config MIPS_MT_SMTC_INSTANT_REPLAY bool "Low-latency Dispatch of Deferred SMTC IPIs" - depends on MIPS_MT_SMTC + depends on MIPS_MT_SMTC && !PREEMPT default y help SMTC pseudo-interrupts between TCs are deferred and queued @@ -1626,6 +1663,18 @@ config 64BIT_PHYS_ADDR config CPU_HAS_LLSC bool +config CPU_HAS_SMARTMIPS + depends on SYS_SUPPORTS_SMARTMIPS + bool "Support for the SmartMIPS ASE" + help + SmartMIPS is a extension of the MIPS32 architecture aimed at + increased security at both hardware and software level for + smartcards. Enabling this option will allow proper use of the + SmartMIPS instructions by Linux applications. However a kernel with + this option will not work on a MIPS core without SmartMIPS core. If + you don't know you probably don't have SmartMIPS and should say N + here. + config CPU_HAS_WB bool @@ -1689,6 +1738,9 @@ config CPU_SUPPORTS_HIGHMEM config SYS_SUPPORTS_HIGHMEM bool +config SYS_SUPPORTS_SMARTMIPS + bool + config ARCH_FLATMEM_ENABLE def_bool y depends on !NUMA @@ -1752,6 +1804,9 @@ config SMP config SYS_SUPPORTS_SMP bool +config NR_CPUS_DEFAULT_1 + bool + config NR_CPUS_DEFAULT_2 bool @@ -1772,8 +1827,9 @@ config NR_CPUS_DEFAULT_64 config NR_CPUS int "Maximum number of CPUs (2-64)" - range 2 64 + range 1 64 if NR_CPUS_DEFAULT_1 depends on SMP + default "1" if NR_CPUS_DEFAULT_1 default "2" if NR_CPUS_DEFAULT_2 default "4" if NR_CPUS_DEFAULT_4 default "8" if NR_CPUS_DEFAULT_8 @@ -1784,10 +1840,13 @@ config NR_CPUS This allows you to specify the maximum number of CPUs which this kernel will support. The maximum supported value is 32 for 32-bit kernel and 64 for 64-bit kernels; the minimum value which makes - sense is 2. + sense is 1 for Qemu (useful only for kernel debugging purposes) + and 2 for all others. This is purely to save memory - each supported CPU adds - approximately eight kilobytes to the kernel image. + approximately eight kilobytes to the kernel image. For best + performance should round up your number of processors to the next + power of two. # # Timer Interrupt Frequency Configuration @@ -1862,10 +1921,6 @@ config HZ source "kernel/Kconfig.preempt" -config RTC_DS1742 - bool "DS1742 BRAM/RTC support" - depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927 - config MIPS_INSANE_LARGE bool "Support for large 64-bit configurations" depends on CPU_R10000 && 64BIT |
