summaryrefslogtreecommitdiffstats
path: root/arch/mips/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/Kconfig')
-rw-r--r--arch/mips/Kconfig88
1 files changed, 84 insertions, 4 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index e3aa5b0..71683a8 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -5,6 +5,7 @@ config MIPS
select ARCH_MIGHT_HAVE_PC_PARPORT
select ARCH_MIGHT_HAVE_PC_SERIO
select ARCH_USE_CMPXCHG_LOCKREF if 64BIT
+ select ARCH_USE_BUILTIN_BSWAP
select HAVE_CONTEXT_TRACKING
select HAVE_GENERIC_DMA_COHERENT
select HAVE_IDE
@@ -60,6 +61,8 @@ config MIPS
select SYSCTL_EXCEPTION_TRACE
select HAVE_VIRT_CPU_ACCOUNTING_GEN
select HAVE_IRQ_TIME_ACCOUNTING
+ select GENERIC_TIME_VSYSCALL
+ select ARCH_CLOCKSOURCE_DATA
menu "Machine selection"
@@ -401,6 +404,28 @@ config MACH_PISTACHIO
help
This enables support for the IMG Pistachio SoC platform.
+config MACH_XILFPGA
+ bool "MIPSfpga Xilinx based boards"
+ select ARCH_REQUIRE_GPIOLIB
+ select BOOT_ELF32
+ select BOOT_RAW
+ select BUILTIN_DTB
+ select CEVT_R4K
+ select COMMON_CLK
+ select CSRC_R4K
+ select IRQ_MIPS_CPU
+ select LIBFDT
+ select MIPS_CPU_SCACHE
+ select SYS_HAS_EARLY_PRINTK
+ select SYS_HAS_CPU_MIPS32_R2
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SYS_SUPPORTS_ZBOOT_UART16550
+ select USE_OF
+ select USE_GENERIC_EARLY_PRINTK_8250
+ help
+ This enables support for the IMG University Program MIPSfpga platform.
+
config MIPS_MALTA
bool "MIPS Malta board"
select ARCH_MAY_HAVE_PC_FDC
@@ -424,6 +449,7 @@ config MIPS_MALTA
select MIPS_L1_CACHE_SHIFT_6
select PCI_GT64XXX_PCI0
select MIPS_MSC
+ select SMP_UP if SMP
select SWAP_IO_SPACE
select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_CPU_MIPS32_R2
@@ -449,6 +475,8 @@ config MIPS_MALTA
select SYS_SUPPORTS_ZBOOT
select USE_OF
select ZONE_DMA32 if 64BIT
+ select BUILTIN_DTB
+ select LIBFDT
help
This enables support for the MIPS Technologies Malta evaluation
board.
@@ -964,6 +992,7 @@ source "arch/mips/loongson32/Kconfig"
source "arch/mips/loongson64/Kconfig"
source "arch/mips/netlogic/Kconfig"
source "arch/mips/paravirt/Kconfig"
+source "arch/mips/xilfpga/Kconfig"
endmenu
@@ -1036,6 +1065,9 @@ config CSRC_R4K
config CSRC_SB1250
bool
+config MIPS_CLOCK_VSYSCALL
+ def_bool CSRC_R4K || CLKSRC_MIPS_GIC
+
config GPIO_TXX9
select ARCH_REQUIRE_GPIOLIB
bool
@@ -2529,6 +2561,9 @@ choice
help
Allows the configuration of the timer frequency.
+ config HZ_24
+ bool "24 HZ" if SYS_SUPPORTS_24HZ || SYS_SUPPORTS_ARBIT_HZ
+
config HZ_48
bool "48 HZ" if SYS_SUPPORTS_48HZ || SYS_SUPPORTS_ARBIT_HZ
@@ -2552,6 +2587,9 @@ choice
endchoice
+config SYS_SUPPORTS_24HZ
+ bool
+
config SYS_SUPPORTS_48HZ
bool
@@ -2575,13 +2613,18 @@ config SYS_SUPPORTS_1024HZ
config SYS_SUPPORTS_ARBIT_HZ
bool
- default y if !SYS_SUPPORTS_48HZ && !SYS_SUPPORTS_100HZ && \
- !SYS_SUPPORTS_128HZ && !SYS_SUPPORTS_250HZ && \
- !SYS_SUPPORTS_256HZ && !SYS_SUPPORTS_1000HZ && \
+ default y if !SYS_SUPPORTS_24HZ && \
+ !SYS_SUPPORTS_48HZ && \
+ !SYS_SUPPORTS_100HZ && \
+ !SYS_SUPPORTS_128HZ && \
+ !SYS_SUPPORTS_250HZ && \
+ !SYS_SUPPORTS_256HZ && \
+ !SYS_SUPPORTS_1000HZ && \
!SYS_SUPPORTS_1024HZ
config HZ
int
+ default 24 if HZ_24
default 48 if HZ_48
default 100 if HZ_100
default 128 if HZ_128
@@ -2685,7 +2728,7 @@ config BUILTIN_DTB
bool
choice
- prompt "Kernel appended dtb support" if OF
+ prompt "Kernel appended dtb support" if USE_OF
default MIPS_NO_APPENDED_DTB
config MIPS_NO_APPENDED_DTB
@@ -2693,6 +2736,20 @@ choice
help
Do not enable appended dtb support.
+ config MIPS_ELF_APPENDED_DTB
+ bool "vmlinux"
+ help
+ With this option, the boot code will look for a device tree binary
+ DTB) included in the vmlinux ELF section .appended_dtb. By default
+ it is empty and the DTB can be appended using binutils command
+ objcopy:
+
+ objcopy --update-section .appended_dtb=<filename>.dtb vmlinux
+
+ This is meant as a backward compatiblity convenience for those
+ systems with a bootloader that can't be upgraded to accommodate
+ the documented boot protocol using a device tree.
+
config MIPS_RAW_APPENDED_DTB
bool "vmlinux.bin"
help
@@ -2729,6 +2786,25 @@ choice
if you don't intend to always append a DTB.
endchoice
+choice
+ prompt "Kernel command line type" if !CMDLINE_OVERRIDE
+ default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \
+ !MIPS_MALTA && !MIPS_SEAD3 && \
+ !CAVIUM_OCTEON_SOC
+ default MIPS_CMDLINE_FROM_BOOTLOADER
+
+ config MIPS_CMDLINE_FROM_DTB
+ depends on USE_OF
+ bool "Dtb kernel arguments if available"
+
+ config MIPS_CMDLINE_DTB_EXTEND
+ depends on USE_OF
+ bool "Extend dtb kernel arguments with bootloader arguments"
+
+ config MIPS_CMDLINE_FROM_BOOTLOADER
+ bool "Bootloader kernel arguments if available"
+endchoice
+
endmenu
config LOCKDEP_SUPPORT
@@ -2739,6 +2815,10 @@ config STACKTRACE_SUPPORT
bool
default y
+config HAVE_LATENCYTOP_SUPPORT
+ bool
+ default y
+
config PGTABLE_LEVELS
int
default 3 if 64BIT && !PAGE_SIZE_64KB
OpenPOWER on IntegriCloud