diff options
Diffstat (limited to 'arch/m68knommu/platform/5307/config.c')
| -rw-r--r-- | arch/m68knommu/platform/5307/config.c | 147 |
1 files changed, 0 insertions, 147 deletions
diff --git a/arch/m68knommu/platform/5307/config.c b/arch/m68knommu/platform/5307/config.c deleted file mode 100644 index 00900ac..0000000 --- a/arch/m68knommu/platform/5307/config.c +++ /dev/null @@ -1,147 +0,0 @@ -/***************************************************************************/ - -/* - * linux/arch/m68knommu/platform/5307/config.c - * - * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com) - * Copyright (C) 2000, Lineo (www.lineo.com) - */ - -/***************************************************************************/ - -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/init.h> -#include <linux/io.h> -#include <asm/machdep.h> -#include <asm/coldfire.h> -#include <asm/mcfsim.h> -#include <asm/mcfuart.h> -#include <asm/mcfwdebug.h> - -/***************************************************************************/ - -/* - * Some platforms need software versions of the GPIO data registers. - */ -unsigned short ppdata; -unsigned char ledbank = 0xff; - -/***************************************************************************/ - -static struct mcf_platform_uart m5307_uart_platform[] = { - { - .mapbase = MCF_MBAR + MCFUART_BASE1, - .irq = 73, - }, - { - .mapbase = MCF_MBAR + MCFUART_BASE2, - .irq = 74, - }, - { }, -}; - -static struct platform_device m5307_uart = { - .name = "mcfuart", - .id = 0, - .dev.platform_data = m5307_uart_platform, -}; - -static struct platform_device *m5307_devices[] __initdata = { - &m5307_uart, -}; - -/***************************************************************************/ - -static void __init m5307_uart_init_line(int line, int irq) -{ - if (line == 0) { - writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR); - writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR); - mcf_mapirq2imr(irq, MCFINTC_UART0); - } else if (line == 1) { - writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR); - writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR); - mcf_mapirq2imr(irq, MCFINTC_UART1); - } -} - -static void __init m5307_uarts_init(void) -{ - const int nrlines = ARRAY_SIZE(m5307_uart_platform); - int line; - - for (line = 0; (line < nrlines); line++) - m5307_uart_init_line(line, m5307_uart_platform[line].irq); -} - -/***************************************************************************/ - -static void __init m5307_timers_init(void) -{ - /* Timer1 is always used as system timer */ - writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3, - MCF_MBAR + MCFSIM_TIMER1ICR); - mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1); - -#ifdef CONFIG_HIGHPROFILE - /* Timer2 is to be used as a high speed profile timer */ - writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3, - MCF_MBAR + MCFSIM_TIMER2ICR); - mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2); -#endif -} - -/***************************************************************************/ - -void m5307_cpu_reset(void) -{ - local_irq_disable(); - /* Set watchdog to soft reset, and enabled */ - __raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR); - for (;;) - /* wait for watchdog to timeout */; -} - -/***************************************************************************/ - -void __init config_BSP(char *commandp, int size) -{ -#if defined(CONFIG_NETtel) || \ - defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA) - /* Copy command line from FLASH to local buffer... */ - memcpy(commandp, (char *) 0xf0004000, size); - commandp[size-1] = 0; -#endif - - mach_reset = m5307_cpu_reset; - m5307_timers_init(); - m5307_uarts_init(); - - /* Only support the external interrupts on their primary level */ - mcf_mapirq2imr(25, MCFINTC_EINT1); - mcf_mapirq2imr(27, MCFINTC_EINT3); - mcf_mapirq2imr(29, MCFINTC_EINT5); - mcf_mapirq2imr(31, MCFINTC_EINT7); - -#ifdef CONFIG_BDM_DISABLE - /* - * Disable the BDM clocking. This also turns off most of the rest of - * the BDM device. This is good for EMC reasons. This option is not - * incompatible with the memory protection option. - */ - wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK); -#endif -} - -/***************************************************************************/ - -static int __init init_BSP(void) -{ - platform_add_devices(m5307_devices, ARRAY_SIZE(m5307_devices)); - return 0; -} - -arch_initcall(init_BSP); - -/***************************************************************************/ |
