diff options
Diffstat (limited to 'arch/m68k/platform/520x/config.c')
-rw-r--r-- | arch/m68k/platform/520x/config.c | 256 |
1 files changed, 16 insertions, 240 deletions
diff --git a/arch/m68k/platform/520x/config.c b/arch/m68k/platform/520x/config.c index 8a98683..23594784 100644 --- a/arch/m68k/platform/520x/config.c +++ b/arch/m68k/platform/520x/config.c @@ -15,194 +15,14 @@ #include <linux/param.h> #include <linux/init.h> #include <linux/io.h> -#include <linux/spi/spi.h> -#include <linux/gpio.h> #include <asm/machdep.h> #include <asm/coldfire.h> #include <asm/mcfsim.h> #include <asm/mcfuart.h> -#include <asm/mcfqspi.h> /***************************************************************************/ -static struct mcf_platform_uart m520x_uart_platform[] = { - { - .mapbase = MCFUART_BASE1, - .irq = MCFINT_VECBASE + MCFINT_UART0, - }, - { - .mapbase = MCFUART_BASE2, - .irq = MCFINT_VECBASE + MCFINT_UART1, - }, - { - .mapbase = MCFUART_BASE3, - .irq = MCFINT_VECBASE + MCFINT_UART2, - }, - { }, -}; - -static struct platform_device m520x_uart = { - .name = "mcfuart", - .id = 0, - .dev.platform_data = m520x_uart_platform, -}; - -static struct resource m520x_fec_resources[] = { - { - .start = MCFFEC_BASE, - .end = MCFFEC_BASE + MCFFEC_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = 64 + 36, - .end = 64 + 36, - .flags = IORESOURCE_IRQ, - }, - { - .start = 64 + 40, - .end = 64 + 40, - .flags = IORESOURCE_IRQ, - }, - { - .start = 64 + 42, - .end = 64 + 42, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device m520x_fec = { - .name = "fec", - .id = 0, - .num_resources = ARRAY_SIZE(m520x_fec_resources), - .resource = m520x_fec_resources, -}; - -#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) -static struct resource m520x_qspi_resources[] = { - { - .start = MCFQSPI_IOBASE, - .end = MCFQSPI_IOBASE + MCFQSPI_IOSIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = MCFINT_VECBASE + MCFINT_QSPI, - .end = MCFINT_VECBASE + MCFINT_QSPI, - .flags = IORESOURCE_IRQ, - }, -}; - -#define MCFQSPI_CS0 46 -#define MCFQSPI_CS1 47 -#define MCFQSPI_CS2 27 - -static int m520x_cs_setup(struct mcfqspi_cs_control *cs_control) -{ - int status; - - status = gpio_request(MCFQSPI_CS0, "MCFQSPI_CS0"); - if (status) { - pr_debug("gpio_request for MCFQSPI_CS0 failed\n"); - goto fail0; - } - status = gpio_direction_output(MCFQSPI_CS0, 1); - if (status) { - pr_debug("gpio_direction_output for MCFQSPI_CS0 failed\n"); - goto fail1; - } - - status = gpio_request(MCFQSPI_CS1, "MCFQSPI_CS1"); - if (status) { - pr_debug("gpio_request for MCFQSPI_CS1 failed\n"); - goto fail1; - } - status = gpio_direction_output(MCFQSPI_CS1, 1); - if (status) { - pr_debug("gpio_direction_output for MCFQSPI_CS1 failed\n"); - goto fail2; - } - - status = gpio_request(MCFQSPI_CS2, "MCFQSPI_CS2"); - if (status) { - pr_debug("gpio_request for MCFQSPI_CS2 failed\n"); - goto fail2; - } - status = gpio_direction_output(MCFQSPI_CS2, 1); - if (status) { - pr_debug("gpio_direction_output for MCFQSPI_CS2 failed\n"); - goto fail3; - } - - return 0; - -fail3: - gpio_free(MCFQSPI_CS2); -fail2: - gpio_free(MCFQSPI_CS1); -fail1: - gpio_free(MCFQSPI_CS0); -fail0: - return status; -} - -static void m520x_cs_teardown(struct mcfqspi_cs_control *cs_control) -{ - gpio_free(MCFQSPI_CS2); - gpio_free(MCFQSPI_CS1); - gpio_free(MCFQSPI_CS0); -} - -static void m520x_cs_select(struct mcfqspi_cs_control *cs_control, - u8 chip_select, bool cs_high) -{ - switch (chip_select) { - case 0: - gpio_set_value(MCFQSPI_CS0, cs_high); - break; - case 1: - gpio_set_value(MCFQSPI_CS1, cs_high); - break; - case 2: - gpio_set_value(MCFQSPI_CS2, cs_high); - break; - } -} - -static void m520x_cs_deselect(struct mcfqspi_cs_control *cs_control, - u8 chip_select, bool cs_high) -{ - switch (chip_select) { - case 0: - gpio_set_value(MCFQSPI_CS0, !cs_high); - break; - case 1: - gpio_set_value(MCFQSPI_CS1, !cs_high); - break; - case 2: - gpio_set_value(MCFQSPI_CS2, !cs_high); - break; - } -} - -static struct mcfqspi_cs_control m520x_cs_control = { - .setup = m520x_cs_setup, - .teardown = m520x_cs_teardown, - .select = m520x_cs_select, - .deselect = m520x_cs_deselect, -}; - -static struct mcfqspi_platform_data m520x_qspi_data = { - .bus_num = 0, - .num_chipselect = 3, - .cs_control = &m520x_cs_control, -}; - -static struct platform_device m520x_qspi = { - .name = "mcfqspi", - .id = 0, - .num_resources = ARRAY_SIZE(m520x_qspi_resources), - .resource = m520x_qspi_resources, - .dev.platform_data = &m520x_qspi_data, -}; +#ifdef CONFIG_SPI_COLDFIRE_QSPI static void __init m520x_qspi_init(void) { @@ -214,54 +34,28 @@ static void __init m520x_qspi_init(void) par &= 0x00ff; writew(par, MCF_GPIO_PAR_UART); } -#endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */ - -static struct platform_device *m520x_devices[] __initdata = { - &m520x_uart, - &m520x_fec, -#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) - &m520x_qspi, -#endif -}; +#endif /* CONFIG_SPI_COLDFIRE_QSPI */ /***************************************************************************/ -static void __init m520x_uart_init_line(int line, int irq) +static void __init m520x_uarts_init(void) { u16 par; u8 par2; - switch (line) { - case 0: - par = readw(MCF_GPIO_PAR_UART); - par |= MCF_GPIO_PAR_UART_PAR_UTXD0 | - MCF_GPIO_PAR_UART_PAR_URXD0; - writew(par, MCF_GPIO_PAR_UART); - break; - case 1: - par = readw(MCF_GPIO_PAR_UART); - par |= MCF_GPIO_PAR_UART_PAR_UTXD1 | - MCF_GPIO_PAR_UART_PAR_URXD1; - writew(par, MCF_GPIO_PAR_UART); - break; - case 2: - par2 = readb(MCF_GPIO_PAR_FECI2C); - par2 &= ~0x0F; - par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 | - MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2; - writeb(par2, MCF_GPIO_PAR_FECI2C); - break; - } -} - -static void __init m520x_uarts_init(void) -{ - const int nrlines = ARRAY_SIZE(m520x_uart_platform); - int line; + /* UART0 and UART1 GPIO pin setup */ + par = readw(MCF_GPIO_PAR_UART); + par |= MCF_GPIO_PAR_UART_PAR_UTXD0 | MCF_GPIO_PAR_UART_PAR_URXD0; + par |= MCF_GPIO_PAR_UART_PAR_UTXD1 | MCF_GPIO_PAR_UART_PAR_URXD1; + writew(par, MCF_GPIO_PAR_UART); - for (line = 0; (line < nrlines); line++) - m520x_uart_init_line(line, m520x_uart_platform[line].irq); + /* UART1 GPIO pin setup */ + par2 = readb(MCF_GPIO_PAR_FECI2C); + par2 &= ~0x0F; + par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 | + MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2; + writeb(par2, MCF_GPIO_PAR_FECI2C); } /***************************************************************************/ @@ -280,32 +74,14 @@ static void __init m520x_fec_init(void) /***************************************************************************/ -static void m520x_cpu_reset(void) -{ - local_irq_disable(); - __raw_writeb(MCF_RCR_SWRESET, MCF_RCR); -} - -/***************************************************************************/ - void __init config_BSP(char *commandp, int size) { - mach_reset = m520x_cpu_reset; + mach_sched_init = hw_timer_init; m520x_uarts_init(); m520x_fec_init(); -#if defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) +#ifdef CONFIG_SPI_COLDFIRE_QSPI m520x_qspi_init(); #endif } /***************************************************************************/ - -static int __init init_BSP(void) -{ - platform_add_devices(m520x_devices, ARRAY_SIZE(m520x_devices)); - return 0; -} - -arch_initcall(init_BSP); - -/***************************************************************************/ |