summaryrefslogtreecommitdiffstats
path: root/arch/m68k/fpsp040/fpsp.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/m68k/fpsp040/fpsp.h')
-rw-r--r--arch/m68k/fpsp040/fpsp.h348
1 files changed, 348 insertions, 0 deletions
diff --git a/arch/m68k/fpsp040/fpsp.h b/arch/m68k/fpsp040/fpsp.h
new file mode 100644
index 0000000..984a4eb
--- /dev/null
+++ b/arch/m68k/fpsp040/fpsp.h
@@ -0,0 +1,348 @@
+|
+| fpsp.h 3.3 3.3
+|
+
+| Copyright (C) Motorola, Inc. 1990
+| All Rights Reserved
+|
+| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
+| The copyright notice above does not evidence any
+| actual or intended publication of such source code.
+
+| fpsp.h --- stack frame offsets during FPSP exception handling
+|
+| These equates are used to access the exception frame, the fsave
+| frame and any local variables needed by the FPSP package.
+|
+| All FPSP handlers begin by executing:
+|
+| link a6,#-LOCAL_SIZE
+| fsave -(a7)
+| movem.l d0-d1/a0-a1,USER_DA(a6)
+| fmovem.x fp0-fp3,USER_FP0(a6)
+| fmove.l fpsr/fpcr/fpiar,USER_FPSR(a6)
+|
+| After initialization, the stack looks like this:
+|
+| A7 ---> +-------------------------------+
+| | |
+| | FPU fsave area |
+| | |
+| +-------------------------------+
+| | |
+| | FPSP Local Variables |
+| | including |
+| | saved registers |
+| | |
+| +-------------------------------+
+| A6 ---> | Saved A6 |
+| +-------------------------------+
+| | |
+| | Exception Frame |
+| | |
+| | |
+|
+| Positive offsets from A6 refer to the exception frame. Negative
+| offsets refer to the Local Variable area and the fsave area.
+| The fsave frame is also accessible from the top via A7.
+|
+| On exit, the handlers execute:
+|
+| movem.l USER_DA(a6),d0-d1/a0-a1
+| fmovem.x USER_FP0(a6),fp0-fp3
+| fmove.l USER_FPSR(a6),fpsr/fpcr/fpiar
+| frestore (a7)+
+| unlk a6
+|
+| and then either "bra fpsp_done" if the exception was completely
+| handled by the package, or "bra real_xxxx" which is an external
+| label to a routine that will process a real exception of the
+| type that was generated. Some handlers may omit the "frestore"
+| if the FPU state after the exception is idle.
+|
+| Sometimes the exception handler will transform the fsave area
+| because it needs to report an exception back to the user. This
+| can happen if the package is entered for an unimplemented float
+| instruction that generates (say) an underflow. Alternatively,
+| a second fsave frame can be pushed onto the stack and the
+| handler exit code will reload the new frame and discard the old.
+|
+| The registers d0, d1, a0, a1 and fp0-fp3 are always saved and
+| restored from the "local variable" area and can be used as
+| temporaries. If a routine needs to change any
+| of these registers, it should modify the saved copy and let
+| the handler exit code restore the value.
+|
+|----------------------------------------------------------------------
+|
+| Local Variables on the stack
+|
+ .set LOCAL_SIZE,192 | bytes needed for local variables
+ .set LV,-LOCAL_SIZE | convenient base value
+|
+ .set USER_DA,LV+0 | save space for D0-D1,A0-A1
+ .set USER_D0,LV+0 | saved user D0
+ .set USER_D1,LV+4 | saved user D1
+ .set USER_A0,LV+8 | saved user A0
+ .set USER_A1,LV+12 | saved user A1
+ .set USER_FP0,LV+16 | saved user FP0
+ .set USER_FP1,LV+28 | saved user FP1
+ .set USER_FP2,LV+40 | saved user FP2
+ .set USER_FP3,LV+52 | saved user FP3
+ .set USER_FPCR,LV+64 | saved user FPCR
+ .set FPCR_ENABLE,USER_FPCR+2 | FPCR exception enable
+ .set FPCR_MODE,USER_FPCR+3 | FPCR rounding mode control
+ .set USER_FPSR,LV+68 | saved user FPSR
+ .set FPSR_CC,USER_FPSR+0 | FPSR condition code
+ .set FPSR_QBYTE,USER_FPSR+1 | FPSR quotient
+ .set FPSR_EXCEPT,USER_FPSR+2 | FPSR exception
+ .set FPSR_AEXCEPT,USER_FPSR+3 | FPSR accrued exception
+ .set USER_FPIAR,LV+72 | saved user FPIAR
+ .set FP_SCR1,LV+76 | room for a temporary float value
+ .set FP_SCR2,LV+92 | room for a temporary float value
+ .set L_SCR1,LV+108 | room for a temporary long value
+ .set L_SCR2,LV+112 | room for a temporary long value
+ .set STORE_FLG,LV+116
+ .set BINDEC_FLG,LV+117 | used in bindec
+ .set DNRM_FLG,LV+118 | used in res_func
+ .set RES_FLG,LV+119 | used in res_func
+ .set DY_MO_FLG,LV+120 | dyadic/monadic flag
+ .set UFLG_TMP,LV+121 | temporary for uflag errata
+ .set CU_ONLY,LV+122 | cu-only flag
+ .set VER_TMP,LV+123 | temp holding for version number
+ .set L_SCR3,LV+124 | room for a temporary long value
+ .set FP_SCR3,LV+128 | room for a temporary float value
+ .set FP_SCR4,LV+144 | room for a temporary float value
+ .set FP_SCR5,LV+160 | room for a temporary float value
+ .set FP_SCR6,LV+176
+|
+|NEXT equ LV+192 ;need to increase LOCAL_SIZE
+|
+|--------------------------------------------------------------------------
+|
+| fsave offsets and bit definitions
+|
+| Offsets are defined from the end of an fsave because the last 10
+| words of a busy frame are the same as the unimplemented frame.
+|
+ .set CU_SAVEPC,LV-92 | micro-pc for CU (1 byte)
+ .set FPR_DIRTY_BITS,LV-91 | fpr dirty bits
+|
+ .set WBTEMP,LV-76 | write back temp (12 bytes)
+ .set WBTEMP_EX,WBTEMP | wbtemp sign and exponent (2 bytes)
+ .set WBTEMP_HI,WBTEMP+4 | wbtemp mantissa [63:32] (4 bytes)
+ .set WBTEMP_LO,WBTEMP+8 | wbtemp mantissa [31:00] (4 bytes)
+|
+ .set WBTEMP_SGN,WBTEMP+2 | used to store sign
+|
+ .set FPSR_SHADOW,LV-64 | fpsr shadow reg
+|
+ .set FPIARCU,LV-60 | Instr. addr. reg. for CU (4 bytes)
+|
+ .set CMDREG2B,LV-52 | cmd reg for machine 2
+ .set CMDREG3B,LV-48 | cmd reg for E3 exceptions (2 bytes)
+|
+ .set NMNEXC,LV-44 | NMNEXC (unsup,snan bits only)
+ .set nmn_unsup_bit,1 |
+ .set nmn_snan_bit,0 |
+|
+ .set NMCEXC,LV-43 | NMNEXC & NMCEXC
+ .set nmn_operr_bit,7
+ .set nmn_ovfl_bit,6
+ .set nmn_unfl_bit,5
+ .set nmc_unsup_bit,4
+ .set nmc_snan_bit,3
+ .set nmc_operr_bit,2
+ .set nmc_ovfl_bit,1
+ .set nmc_unfl_bit,0
+|
+ .set STAG,LV-40 | source tag (1 byte)
+ .set WBTEMP_GRS,LV-40 | alias wbtemp guard, round, sticky
+ .set guard_bit,1 | guard bit is bit number 1
+ .set round_bit,0 | round bit is bit number 0
+ .set stag_mask,0xE0 | upper 3 bits are source tag type
+ .set denorm_bit,7 | bit determines if denorm or unnorm
+ .set etemp15_bit,4 | etemp exponent bit #15
+ .set wbtemp66_bit,2 | wbtemp mantissa bit #66
+ .set wbtemp1_bit,1 | wbtemp mantissa bit #1
+ .set wbtemp0_bit,0 | wbtemp mantissa bit #0
+|
+ .set STICKY,LV-39 | holds sticky bit
+ .set sticky_bit,7
+|
+ .set CMDREG1B,LV-36 | cmd reg for E1 exceptions (2 bytes)
+ .set kfact_bit,12 | distinguishes static/dynamic k-factor
+| ;on packed move outs. NOTE: this
+| ;equate only works when CMDREG1B is in
+| ;a register.
+|
+ .set CMDWORD,LV-35 | command word in cmd1b
+ .set direction_bit,5 | bit 0 in opclass
+ .set size_bit2,12 | bit 2 in size field
+|
+ .set DTAG,LV-32 | dest tag (1 byte)
+ .set dtag_mask,0xE0 | upper 3 bits are dest type tag
+ .set fptemp15_bit,4 | fptemp exponent bit #15
+|
+ .set WB_BYTE,LV-31 | holds WBTE15 bit (1 byte)
+ .set wbtemp15_bit,4 | wbtemp exponent bit #15
+|
+ .set E_BYTE,LV-28 | holds E1 and E3 bits (1 byte)
+ .set E1,2 | which bit is E1 flag
+ .set E3,1 | which bit is E3 flag
+ .set SFLAG,0 | which bit is S flag
+|
+ .set T_BYTE,LV-27 | holds T and U bits (1 byte)
+ .set XFLAG,7 | which bit is X flag
+ .set UFLAG,5 | which bit is U flag
+ .set TFLAG,4 | which bit is T flag
+|
+ .set FPTEMP,LV-24 | fptemp (12 bytes)
+ .set FPTEMP_EX,FPTEMP | fptemp sign and exponent (2 bytes)
+ .set FPTEMP_HI,FPTEMP+4 | fptemp mantissa [63:32] (4 bytes)
+ .set FPTEMP_LO,FPTEMP+8 | fptemp mantissa [31:00] (4 bytes)
+|
+ .set FPTEMP_SGN,FPTEMP+2 | used to store sign
+|
+ .set ETEMP,LV-12 | etemp (12 bytes)
+ .set ETEMP_EX,ETEMP | etemp sign and exponent (2 bytes)
+ .set ETEMP_HI,ETEMP+4 | etemp mantissa [63:32] (4 bytes)
+ .set ETEMP_LO,ETEMP+8 | etemp mantissa [31:00] (4 bytes)
+|
+ .set ETEMP_SGN,ETEMP+2 | used to store sign
+|
+ .set EXC_SR,4 | exception frame status register
+ .set EXC_PC,6 | exception frame program counter
+ .set EXC_VEC,10 | exception frame vector (format+vector#)
+ .set EXC_EA,12 | exception frame effective address
+|
+|--------------------------------------------------------------------------
+|
+| FPSR/FPCR bits
+|
+ .set neg_bit,3 | negative result
+ .set z_bit,2 | zero result
+ .set inf_bit,1 | infinity result
+ .set nan_bit,0 | not-a-number result
+|
+ .set q_sn_bit,7 | sign bit of quotient byte
+|
+ .set bsun_bit,7 | branch on unordered
+ .set snan_bit,6 | signalling nan
+ .set operr_bit,5 | operand error
+ .set ovfl_bit,4 | overflow
+ .set unfl_bit,3 | underflow
+ .set dz_bit,2 | divide by zero
+ .set inex2_bit,1 | inexact result 2
+ .set inex1_bit,0 | inexact result 1
+|
+ .set aiop_bit,7 | accrued illegal operation
+ .set aovfl_bit,6 | accrued overflow
+ .set aunfl_bit,5 | accrued underflow
+ .set adz_bit,4 | accrued divide by zero
+ .set ainex_bit,3 | accrued inexact
+|
+| FPSR individual bit masks
+|
+ .set neg_mask,0x08000000
+ .set z_mask,0x04000000
+ .set inf_mask,0x02000000
+ .set nan_mask,0x01000000
+|
+ .set bsun_mask,0x00008000 |
+ .set snan_mask,0x00004000
+ .set operr_mask,0x00002000
+ .set ovfl_mask,0x00001000
+ .set unfl_mask,0x00000800
+ .set dz_mask,0x00000400
+ .set inex2_mask,0x00000200
+ .set inex1_mask,0x00000100
+|
+ .set aiop_mask,0x00000080 | accrued illegal operation
+ .set aovfl_mask,0x00000040 | accrued overflow
+ .set aunfl_mask,0x00000020 | accrued underflow
+ .set adz_mask,0x00000010 | accrued divide by zero
+ .set ainex_mask,0x00000008 | accrued inexact
+|
+| FPSR combinations used in the FPSP
+|
+ .set dzinf_mask,inf_mask+dz_mask+adz_mask
+ .set opnan_mask,nan_mask+operr_mask+aiop_mask
+ .set nzi_mask,0x01ffffff | clears N, Z, and I
+ .set unfinx_mask,unfl_mask+inex2_mask+aunfl_mask+ainex_mask
+ .set unf2inx_mask,unfl_mask+inex2_mask+ainex_mask
+ .set ovfinx_mask,ovfl_mask+inex2_mask+aovfl_mask+ainex_mask
+ .set inx1a_mask,inex1_mask+ainex_mask
+ .set inx2a_mask,inex2_mask+ainex_mask
+ .set snaniop_mask,nan_mask+snan_mask+aiop_mask
+ .set naniop_mask,nan_mask+aiop_mask
+ .set neginf_mask,neg_mask+inf_mask
+ .set infaiop_mask,inf_mask+aiop_mask
+ .set negz_mask,neg_mask+z_mask
+ .set opaop_mask,operr_mask+aiop_mask
+ .set unfl_inx_mask,unfl_mask+aunfl_mask+ainex_mask
+ .set ovfl_inx_mask,ovfl_mask+aovfl_mask+ainex_mask
+|
+|--------------------------------------------------------------------------
+|
+| FPCR rounding modes
+|
+ .set x_mode,0x00 | round to extended
+ .set s_mode,0x40 | round to single
+ .set d_mode,0x80 | round to double
+|
+ .set rn_mode,0x00 | round nearest
+ .set rz_mode,0x10 | round to zero
+ .set rm_mode,0x20 | round to minus infinity
+ .set rp_mode,0x30 | round to plus infinity
+|
+|--------------------------------------------------------------------------
+|
+| Miscellaneous equates
+|
+ .set signan_bit,6 | signalling nan bit in mantissa
+ .set sign_bit,7
+|
+ .set rnd_stky_bit,29 | round/sticky bit of mantissa
+| this can only be used if in a data register
+ .set sx_mask,0x01800000 | set s and x bits in word $48
+|
+ .set LOCAL_EX,0
+ .set LOCAL_SGN,2
+ .set LOCAL_HI,4
+ .set LOCAL_LO,8
+ .set LOCAL_GRS,12 | valid ONLY for FP_SCR1, FP_SCR2
+|
+|
+ .set norm_tag,0x00 | tag bits in {7:5} position
+ .set zero_tag,0x20
+ .set inf_tag,0x40
+ .set nan_tag,0x60
+ .set dnrm_tag,0x80
+|
+| fsave sizes and formats
+|
+ .set VER_4,0x40 | fpsp compatible version numbers
+| are in the $40s {$40-$4f}
+ .set VER_40,0x40 | original version number
+ .set VER_41,0x41 | revision version number
+|
+ .set BUSY_SIZE,100 | size of busy frame
+ .set BUSY_FRAME,LV-BUSY_SIZE | start of busy frame
+|
+ .set UNIMP_40_SIZE,44 | size of orig unimp frame
+ .set UNIMP_41_SIZE,52 | size of rev unimp frame
+|
+ .set IDLE_SIZE,4 | size of idle frame
+ .set IDLE_FRAME,LV-IDLE_SIZE | start of idle frame
+|
+| exception vectors
+|
+ .set TRACE_VEC,0x2024 | trace trap
+ .set FLINE_VEC,0x002C | real F-line
+ .set UNIMP_VEC,0x202C | unimplemented
+ .set INEX_VEC,0x00C4
+|
+ .set dbl_thresh,0x3C01
+ .set sgl_thresh,0x3F81
+|
OpenPOWER on IntegriCloud