diff options
Diffstat (limited to 'arch/m68k/atari/config.c')
| -rw-r--r-- | arch/m68k/atari/config.c | 989 |
1 files changed, 472 insertions, 517 deletions
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c index ca5cd43..b10e7ad 100644 --- a/arch/m68k/atari/config.c +++ b/arch/m68k/atari/config.c @@ -50,19 +50,19 @@ int atari_dont_touch_floppy_select; int atari_rtc_year_offset; /* local function prototypes */ -static void atari_reset( void ); +static void atari_reset(void); static void atari_get_model(char *model); static int atari_get_hardware_list(char *buffer); /* atari specific irq functions */ extern void atari_init_IRQ (void); -extern void atari_mksound( unsigned int count, unsigned int ticks ); +extern void atari_mksound(unsigned int count, unsigned int ticks); #ifdef CONFIG_HEARTBEAT -static void atari_heartbeat( int on ); +static void atari_heartbeat(int on); #endif /* atari specific timer functions (in time.c) */ -extern void atari_sched_init(irq_handler_t ); +extern void atari_sched_init(irq_handler_t); extern unsigned long atari_gettimeoffset (void); extern int atari_mste_hwclk (int, struct rtc_time *); extern int atari_tt_hwclk (int, struct rtc_time *); @@ -73,48 +73,6 @@ extern int atari_tt_set_clock_mmss (unsigned long); extern void atari_debug_init(void); -/* I've moved hwreg_present() and hwreg_present_bywrite() out into - * mm/hwtest.c, to avoid having multiple copies of the same routine - * in the kernel [I wanted them in hp300 and they were already used - * in the nubus code. NB: I don't have an Atari so this might (just - * conceivably) break something. - * I've preserved the #if 0 version of hwreg_present_bywrite() here - * for posterity. - * -- Peter Maydell <pmaydell@chiark.greenend.org.uk>, 05/1998 - */ - -#if 0 -static int __init -hwreg_present_bywrite(volatile void *regp, unsigned char val) -{ - int ret; - long save_sp, save_vbr; - static long tmp_vectors[3] = { [2] = (long)&&after_test }; - - __asm__ __volatile__ - ( "movec %/vbr,%2\n\t" /* save vbr value */ - "movec %4,%/vbr\n\t" /* set up temporary vectors */ - "movel %/sp,%1\n\t" /* save sp */ - "moveq #0,%0\n\t" /* assume not present */ - "moveb %5,%3@\n\t" /* write the hardware reg */ - "cmpb %3@,%5\n\t" /* compare it */ - "seq %0" /* comes here only if reg */ - /* is present */ - : "=d&" (ret), "=r&" (save_sp), "=r&" (save_vbr) - : "a" (regp), "r" (tmp_vectors), "d" (val) - ); - after_test: - __asm__ __volatile__ - ( "movel %0,%/sp\n\t" /* restore sp */ - "movec %1,%/vbr" /* restore vbr */ - : : "r" (save_sp), "r" (save_vbr) : "sp" - ); - - return( ret ); -} -#endif - - /* ++roman: This is a more elaborate test for an SCC chip, since the plain * Medusa board generates DTACK at the SCC's standard addresses, but a SCC * board in the Medusa is possible. Also, the addresses where the ST_ESCC @@ -123,26 +81,34 @@ hwreg_present_bywrite(volatile void *regp, unsigned char val) * should be readable without trouble (from channel A!). */ -static int __init scc_test( volatile char *ctla ) +static int __init scc_test(volatile char *ctla) { - if (!hwreg_present( ctla )) - return( 0 ); + if (!hwreg_present(ctla)) + return 0; MFPDELAY(); - *ctla = 2; MFPDELAY(); - *ctla = 0x40; MFPDELAY(); + *ctla = 2; + MFPDELAY(); + *ctla = 0x40; + MFPDELAY(); - *ctla = 2; MFPDELAY(); - if (*ctla != 0x40) return( 0 ); + *ctla = 2; + MFPDELAY(); + if (*ctla != 0x40) + return 0; MFPDELAY(); - *ctla = 2; MFPDELAY(); - *ctla = 0x60; MFPDELAY(); + *ctla = 2; + MFPDELAY(); + *ctla = 0x60; + MFPDELAY(); - *ctla = 2; MFPDELAY(); - if (*ctla != 0x60) return( 0 ); + *ctla = 2; + MFPDELAY(); + if (*ctla != 0x60) + return 0; - return( 1 ); + return 1; } @@ -152,59 +118,58 @@ static int __init scc_test( volatile char *ctla ) int __init atari_parse_bootinfo(const struct bi_record *record) { - int unknown = 0; - const u_long *data = record->data; + int unknown = 0; + const u_long *data = record->data; - switch (record->tag) { + switch (record->tag) { case BI_ATARI_MCH_COOKIE: - atari_mch_cookie = *data; - break; + atari_mch_cookie = *data; + break; case BI_ATARI_MCH_TYPE: - atari_mch_type = *data; - break; + atari_mch_type = *data; + break; default: - unknown = 1; - } - return(unknown); + unknown = 1; + break; + } + return unknown; } /* Parse the Atari-specific switches= option. */ -void __init atari_switches_setup( const char *str, unsigned len ) +void __init atari_switches_setup(const char *str, unsigned len) { - char switches[len+1]; - char *p; - int ovsc_shift; - char *args = switches; - - /* copy string to local array, strsep works destructively... */ - strlcpy( switches, str, sizeof(switches) ); - atari_switches = 0; - - /* parse the options */ - while ((p = strsep(&args, ",")) != NULL) { - if (!*p) continue; - ovsc_shift = 0; - if (strncmp( p, "ov_", 3 ) == 0) { - p += 3; - ovsc_shift = ATARI_SWITCH_OVSC_SHIFT; - } - - if (strcmp( p, "ikbd" ) == 0) { - /* RTS line of IKBD ACIA */ - atari_switches |= ATARI_SWITCH_IKBD << ovsc_shift; - } - else if (strcmp( p, "midi" ) == 0) { - /* RTS line of MIDI ACIA */ - atari_switches |= ATARI_SWITCH_MIDI << ovsc_shift; + char switches[len+1]; + char *p; + int ovsc_shift; + char *args = switches; + + /* copy string to local array, strsep works destructively... */ + strlcpy(switches, str, sizeof(switches)); + atari_switches = 0; + + /* parse the options */ + while ((p = strsep(&args, ",")) != NULL) { + if (!*p) + continue; + ovsc_shift = 0; + if (strncmp(p, "ov_", 3) == 0) { + p += 3; + ovsc_shift = ATARI_SWITCH_OVSC_SHIFT; + } + + if (strcmp(p, "ikbd") == 0) { + /* RTS line of IKBD ACIA */ + atari_switches |= ATARI_SWITCH_IKBD << ovsc_shift; + } else if (strcmp(p, "midi") == 0) { + /* RTS line of MIDI ACIA */ + atari_switches |= ATARI_SWITCH_MIDI << ovsc_shift; + } else if (strcmp(p, "snd6") == 0) { + atari_switches |= ATARI_SWITCH_SND6 << ovsc_shift; + } else if (strcmp(p, "snd7") == 0) { + atari_switches |= ATARI_SWITCH_SND7 << ovsc_shift; + } } - else if (strcmp( p, "snd6" ) == 0) { - atari_switches |= ATARI_SWITCH_SND6 << ovsc_shift; - } - else if (strcmp( p, "snd7" ) == 0) { - atari_switches |= ATARI_SWITCH_SND7 << ovsc_shift; - } - } } @@ -214,284 +179,283 @@ void __init atari_switches_setup( const char *str, unsigned len ) void __init config_atari(void) { - unsigned short tos_version; + unsigned short tos_version; - memset(&atari_hw_present, 0, sizeof(atari_hw_present)); + memset(&atari_hw_present, 0, sizeof(atari_hw_present)); - atari_debug_init(); + atari_debug_init(); - ioport_resource.end = 0xFFFFFFFF; /* Change size of I/O space from 64KB - to 4GB. */ + /* Change size of I/O space from 64KB to 4GB. */ + ioport_resource.end = 0xFFFFFFFF; - mach_sched_init = atari_sched_init; - mach_init_IRQ = atari_init_IRQ; - mach_get_model = atari_get_model; - mach_get_hardware_list = atari_get_hardware_list; - mach_gettimeoffset = atari_gettimeoffset; - mach_reset = atari_reset; - mach_max_dma_address = 0xffffff; + mach_sched_init = atari_sched_init; + mach_init_IRQ = atari_init_IRQ; + mach_get_model = atari_get_model; + mach_get_hardware_list = atari_get_hardware_list; + mach_gettimeoffset = atari_gettimeoffset; + mach_reset = atari_reset; + mach_max_dma_address = 0xffffff; #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE) - mach_beep = atari_mksound; + mach_beep = atari_mksound; #endif #ifdef CONFIG_HEARTBEAT - mach_heartbeat = atari_heartbeat; + mach_heartbeat = atari_heartbeat; #endif - /* Set switches as requested by the user */ - if (atari_switches & ATARI_SWITCH_IKBD) - acia.key_ctrl = ACIA_DIV64 | ACIA_D8N1S | ACIA_RHTID; - if (atari_switches & ATARI_SWITCH_MIDI) - acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S | ACIA_RHTID; - if (atari_switches & (ATARI_SWITCH_SND6|ATARI_SWITCH_SND7)) { - sound_ym.rd_data_reg_sel = 14; - sound_ym.wd_data = sound_ym.rd_data_reg_sel | - ((atari_switches&ATARI_SWITCH_SND6) ? 0x40 : 0) | - ((atari_switches&ATARI_SWITCH_SND7) ? 0x80 : 0); - } - - /* ++bjoern: - * Determine hardware present - */ + /* Set switches as requested by the user */ + if (atari_switches & ATARI_SWITCH_IKBD) + acia.key_ctrl = ACIA_DIV64 | ACIA_D8N1S | ACIA_RHTID; + if (atari_switches & ATARI_SWITCH_MIDI) + acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S | ACIA_RHTID; + if (atari_switches & (ATARI_SWITCH_SND6|ATARI_SWITCH_SND7)) { + sound_ym.rd_data_reg_sel = 14; + sound_ym.wd_data = sound_ym.rd_data_reg_sel | + ((atari_switches&ATARI_SWITCH_SND6) ? 0x40 : 0) | + ((atari_switches&ATARI_SWITCH_SND7) ? 0x80 : 0); + } - printk( "Atari hardware found: " ); - if (MACH_IS_MEDUSA || MACH_IS_HADES) { - /* There's no Atari video hardware on the Medusa, but all the - * addresses below generate a DTACK so no bus error occurs! */ - } - else if (hwreg_present( f030_xreg )) { - ATARIHW_SET(VIDEL_SHIFTER); - printk( "VIDEL " ); - /* This is a temporary hack: If there is Falcon video - * hardware, we assume that the ST-DMA serves SCSI instead of - * ACSI. In the future, there should be a better method for - * this... - */ - ATARIHW_SET(ST_SCSI); - printk( "STDMA-SCSI " ); - } - else if (hwreg_present( tt_palette )) { - ATARIHW_SET(TT_SHIFTER); - printk( "TT_SHIFTER " ); - } - else if (hwreg_present( &shifter.bas_hi )) { - if (hwreg_present( &shifter.bas_lo ) && - (shifter.bas_lo = 0x0aau, shifter.bas_lo == 0x0aau)) { - ATARIHW_SET(EXTD_SHIFTER); - printk( "EXTD_SHIFTER " ); - } - else { - ATARIHW_SET(STND_SHIFTER); - printk( "STND_SHIFTER " ); - } - } - if (hwreg_present( &mfp.par_dt_reg )) { - ATARIHW_SET(ST_MFP); - printk( "ST_MFP " ); - } - if (hwreg_present( &tt_mfp.par_dt_reg )) { - ATARIHW_SET(TT_MFP); - printk( "TT_MFP " ); - } - if (hwreg_present( &tt_scsi_dma.dma_addr_hi )) { - ATARIHW_SET(SCSI_DMA); - printk( "TT_SCSI_DMA " ); - } - if (!MACH_IS_HADES && hwreg_present( &st_dma.dma_hi )) { - ATARIHW_SET(STND_DMA); - printk( "STND_DMA " ); - } - if (MACH_IS_MEDUSA || /* The ST-DMA address registers aren't readable - * on all Medusas, so the test below may fail */ - (hwreg_present( &st_dma.dma_vhi ) && - (st_dma.dma_vhi = 0x55) && (st_dma.dma_hi = 0xaa) && - st_dma.dma_vhi == 0x55 && st_dma.dma_hi == 0xaa && - (st_dma.dma_vhi = 0xaa) && (st_dma.dma_hi = 0x55) && - st_dma.dma_vhi == 0xaa && st_dma.dma_hi == 0x55)) { - ATARIHW_SET(EXTD_DMA); - printk( "EXTD_DMA " ); - } - if (hwreg_present( &tt_scsi.scsi_data )) { - ATARIHW_SET(TT_SCSI); - printk( "TT_SCSI " ); - } - if (hwreg_present( &sound_ym.rd_data_reg_sel )) { - ATARIHW_SET(YM_2149); - printk( "YM2149 " ); - } - if (!MACH_IS_MEDUSA && !MACH_IS_HADES && - hwreg_present( &tt_dmasnd.ctrl )) { - ATARIHW_SET(PCM_8BIT); - printk( "PCM " ); - } - if (!MACH_IS_HADES && hwreg_present( &falcon_codec.unused5 )) { - ATARIHW_SET(CODEC); - printk( "CODEC " ); - } - if (hwreg_present( &dsp56k_host_interface.icr )) { - ATARIHW_SET(DSP56K); - printk( "DSP56K " ); - } - if (hwreg_present( &tt_scc_dma.dma_ctrl ) && + /* ++bjoern: + * Determine hardware present + */ + + printk("Atari hardware found: "); + if (MACH_IS_MEDUSA || MACH_IS_HADES) { + /* There's no Atari video hardware on the Medusa, but all the + * addresses below generate a DTACK so no bus error occurs! */ + } else if (hwreg_present(f030_xreg)) { + ATARIHW_SET(VIDEL_SHIFTER); + printk("VIDEL "); + /* This is a temporary hack: If there is Falcon video + * hardware, we assume that the ST-DMA serves SCSI instead of + * ACSI. In the future, there should be a better method for + * this... + */ + ATARIHW_SET(ST_SCSI); + printk("STDMA-SCSI "); + } else if (hwreg_present(tt_palette)) { + ATARIHW_SET(TT_SHIFTER); + printk("TT_SHIFTER "); + } else if (hwreg_present(&shifter.bas_hi)) { + if (hwreg_present(&shifter.bas_lo) && + (shifter.bas_lo = 0x0aau, shifter.bas_lo == 0x0aau)) { + ATARIHW_SET(EXTD_SHIFTER); + printk("EXTD_SHIFTER "); + } else { + ATARIHW_SET(STND_SHIFTER); + printk("STND_SHIFTER "); + } + } + if (hwreg_present(&mfp.par_dt_reg)) { + ATARIHW_SET(ST_MFP); + printk("ST_MFP "); + } + if (hwreg_present(&tt_mfp.par_dt_reg)) { + ATARIHW_SET(TT_MFP); + printk("TT_MFP "); + } + if (hwreg_present(&tt_scsi_dma.dma_addr_hi)) { + ATARIHW_SET(SCSI_DMA); + printk("TT_SCSI_DMA "); + } + if (!MACH_IS_HADES && hwreg_present(&st_dma.dma_hi)) { + ATARIHW_SET(STND_DMA); + printk("STND_DMA "); + } + /* + * The ST-DMA address registers aren't readable + * on all Medusas, so the test below may fail + */ + if (MACH_IS_MEDUSA || + (hwreg_present(&st_dma.dma_vhi) && + (st_dma.dma_vhi = 0x55) && (st_dma.dma_hi = 0xaa) && + st_dma.dma_vhi == 0x55 && st_dma.dma_hi == 0xaa && + (st_dma.dma_vhi = 0xaa) && (st_dma.dma_hi = 0x55) && + st_dma.dma_vhi == 0xaa && st_dma.dma_hi == 0x55)) { + ATARIHW_SET(EXTD_DMA); + printk("EXTD_DMA "); + } + if (hwreg_present(&tt_scsi.scsi_data)) { + ATARIHW_SET(TT_SCSI); + printk("TT_SCSI "); + } + if (hwreg_present(&sound_ym.rd_data_reg_sel)) { + ATARIHW_SET(YM_2149); + printk("YM2149 "); + } + if (!MACH_IS_MEDUSA && !MACH_IS_HADES && + hwreg_present(&tt_dmasnd.ctrl)) { + ATARIHW_SET(PCM_8BIT); + printk("PCM "); + } + if (!MACH_IS_HADES && hwreg_present(&falcon_codec.unused5)) { + ATARIHW_SET(CODEC); + printk("CODEC "); + } + if (hwreg_present(&dsp56k_host_interface.icr)) { + ATARIHW_SET(DSP56K); + printk("DSP56K "); + } + if (hwreg_present(&tt_scc_dma.dma_ctrl) && #if 0 - /* This test sucks! Who knows some better? */ - (tt_scc_dma.dma_ctrl = 0x01, (tt_scc_dma.dma_ctrl & 1) == 1) && - (tt_scc_dma.dma_ctrl = 0x00, (tt_scc_dma.dma_ctrl & 1) == 0) + /* This test sucks! Who knows some better? */ + (tt_scc_dma.dma_ctrl = 0x01, (tt_scc_dma.dma_ctrl & 1) == 1) && + (tt_scc_dma.dma_ctrl = 0x00, (tt_scc_dma.dma_ctrl & 1) == 0) #else - !MACH_IS_MEDUSA && !MACH_IS_HADES + !MACH_IS_MEDUSA && !MACH_IS_HADES #endif - ) { - ATARIHW_SET(SCC_DMA); - printk( "SCC_DMA " ); - } - if (scc_test( &scc.cha_a_ctrl )) { - ATARIHW_SET(SCC); - printk( "SCC " ); - } - if (scc_test( &st_escc.cha_b_ctrl )) { - ATARIHW_SET( ST_ESCC ); - printk( "ST_ESCC " ); - } - if (MACH_IS_HADES) - { - ATARIHW_SET( VME ); - printk( "VME " ); - } - else if (hwreg_present( &tt_scu.sys_mask )) { - ATARIHW_SET(SCU); - /* Assume a VME bus if there's a SCU */ - ATARIHW_SET( VME ); - printk( "VME SCU " ); - } - if (hwreg_present( (void *)(0xffff9210) )) { - ATARIHW_SET(ANALOG_JOY); - printk( "ANALOG_JOY " ); - } - if (!MACH_IS_HADES && hwreg_present( blitter.halftone )) { - ATARIHW_SET(BLITTER); - printk( "BLITTER " ); - } - if (hwreg_present((void *)0xfff00039)) { - ATARIHW_SET(IDE); - printk( "IDE " ); - } + ) { + ATARIHW_SET(SCC_DMA); + printk("SCC_DMA "); + } + if (scc_test(&scc.cha_a_ctrl)) { + ATARIHW_SET(SCC); + printk("SCC "); + } + if (scc_test(&st_escc.cha_b_ctrl)) { + ATARIHW_SET(ST_ESCC); + printk("ST_ESCC "); + } + if (MACH_IS_HADES) { + ATARIHW_SET(VME); + printk("VME "); + } else if (hwreg_present(&tt_scu.sys_mask)) { + ATARIHW_SET(SCU); + /* Assume a VME bus if there's a SCU */ + ATARIHW_SET(VME); + printk("VME SCU "); + } + if (hwreg_present((void *)(0xffff9210))) { + ATARIHW_SET(ANALOG_JOY); + printk("ANALOG_JOY "); + } + if (!MACH_IS_HADES && hwreg_present(blitter.halftone)) { + ATARIHW_SET(BLITTER); + printk("BLITTER "); + } + if (hwreg_present((void *)0xfff00039)) { + ATARIHW_SET(IDE); + printk("IDE "); + } #if 1 /* This maybe wrong */ - if (!MACH_IS_MEDUSA && !MACH_IS_HADES && - hwreg_present( &tt_microwire.data ) && - hwreg_present( &tt_microwire.mask ) && - (tt_microwire.mask = 0x7ff, - udelay(1), - tt_microwire.data = MW_LM1992_PSG_HIGH | MW_LM1992_ADDR, - udelay(1), - tt_microwire.data != 0)) { - ATARIHW_SET(MICROWIRE); - while (tt_microwire.mask != 0x7ff) ; - printk( "MICROWIRE " ); - } + if (!MACH_IS_MEDUSA && !MACH_IS_HADES && + hwreg_present(&tt_microwire.data) && + hwreg_present(&tt_microwire.mask) && + (tt_microwire.mask = 0x7ff, + udelay(1), + tt_microwire.data = MW_LM1992_PSG_HIGH | MW_LM1992_ADDR, + udelay(1), + tt_microwire.data != 0)) { + ATARIHW_SET(MICROWIRE); + while (tt_microwire.mask != 0x7ff) + ; + printk("MICROWIRE "); + } #endif - if (hwreg_present( &tt_rtc.regsel )) { - ATARIHW_SET(TT_CLK); - printk( "TT_CLK " ); - mach_hwclk = atari_tt_hwclk; - mach_set_clock_mmss = atari_tt_set_clock_mmss; - } - if (!MACH_IS_HADES && hwreg_present( &mste_rtc.sec_ones)) { - ATARIHW_SET(MSTE_CLK); - printk( "MSTE_CLK "); - mach_hwclk = atari_mste_hwclk; - mach_set_clock_mmss = atari_mste_set_clock_mmss; - } - if (!MACH_IS_MEDUSA && !MACH_IS_HADES && - hwreg_present( &dma_wd.fdc_speed ) && - hwreg_write( &dma_wd.fdc_speed, 0 )) { - ATARIHW_SET(FDCSPEED); - printk( "FDC_SPEED "); - } - if (!MACH_IS_HADES && !ATARIHW_PRESENT(ST_SCSI)) { - ATARIHW_SET(ACSI); - printk( "ACSI " ); - } - printk("\n"); - - if (CPU_IS_040_OR_060) - /* Now it seems to be safe to turn of the tt0 transparent - * translation (the one that must not be turned off in - * head.S...) - */ - __asm__ volatile ("moveq #0,%/d0\n\t" - ".chip 68040\n\t" - "movec %%d0,%%itt0\n\t" - "movec %%d0,%%dtt0\n\t" - ".chip 68k" - : /* no outputs */ - : /* no inputs */ - : "d0"); - - /* allocator for memory that must reside in st-ram */ - atari_stram_init (); - - /* Set up a mapping for the VMEbus address region: - * - * VME is either at phys. 0xfexxxxxx (TT) or 0xa00000..0xdfffff - * (MegaSTE) In both cases, the whole 16 MB chunk is mapped at - * 0xfe000000 virt., because this can be done with a single - * transparent translation. On the 68040, lots of often unused - * page tables would be needed otherwise. On a MegaSTE or similar, - * the highest byte is stripped off by hardware due to the 24 bit - * design of the bus. - */ + if (hwreg_present(&tt_rtc.regsel)) { + ATARIHW_SET(TT_CLK); + printk("TT_CLK "); + mach_hwclk = atari_tt_hwclk; + mach_set_clock_mmss = atari_tt_set_clock_mmss; + } + if (!MACH_IS_HADES && hwreg_present(&mste_rtc.sec_ones)) { + ATARIHW_SET(MSTE_CLK); + printk("MSTE_CLK "); + mach_hwclk = atari_mste_hwclk; + mach_set_clock_mmss = atari_mste_set_clock_mmss; + } + if (!MACH_IS_MEDUSA && !MACH_IS_HADES && + hwreg_present(&dma_wd.fdc_speed) && + hwreg_write(&dma_wd.fdc_speed, 0)) { + ATARIHW_SET(FDCSPEED); + printk("FDC_SPEED "); + } + if (!MACH_IS_HADES && !ATARIHW_PRESENT(ST_SCSI)) { + ATARIHW_SET(ACSI); + printk("ACSI "); + } + printk("\n"); + + if (CPU_IS_040_OR_060) + /* Now it seems to be safe to turn of the tt0 transparent + * translation (the one that must not be turned off in + * head.S...) + */ + asm volatile ("\n" + " moveq #0,%%d0\n" + " .chip 68040\n" + " movec %%d0,%%itt0\n" + " movec %%d0,%%dtt0\n" + " .chip 68k" + : /* no outputs */ + : /* no inputs */ + : "d0"); + + /* allocator for memory that must reside in st-ram */ + atari_stram_init(); + + /* Set up a mapping for the VMEbus address region: + * + * VME is either at phys. 0xfexxxxxx (TT) or 0xa00000..0xdfffff + * (MegaSTE) In both cases, the whole 16 MB chunk is mapped at + * 0xfe000000 virt., because this can be done with a single + * transparent translation. On the 68040, lots of often unused + * page tables would be needed otherwise. On a MegaSTE or similar, + * the highest byte is stripped off by hardware due to the 24 bit + * design of the bus. + */ + + if (CPU_IS_020_OR_030) { + unsigned long tt1_val; + tt1_val = 0xfe008543; /* Translate 0xfexxxxxx, enable, cache + * inhibit, read and write, FDC mask = 3, + * FDC val = 4 -> Supervisor only */ + asm volatile ("\n" + " .chip 68030\n" + " pmove %0@,%/tt1\n" + " .chip 68k" + : : "a" (&tt1_val)); + } else { + asm volatile ("\n" + " .chip 68040\n" + " movec %0,%%itt1\n" + " movec %0,%%dtt1\n" + " .chip 68k" + : + : "d" (0xfe00a040)); /* Translate 0xfexxxxxx, enable, + * supervisor only, non-cacheable/ + * serialized, writable */ + + } - if (CPU_IS_020_OR_030) { - unsigned long tt1_val; - tt1_val = 0xfe008543; /* Translate 0xfexxxxxx, enable, cache - * inhibit, read and write, FDC mask = 3, - * FDC val = 4 -> Supervisor only */ - __asm__ __volatile__ ( ".chip 68030\n\t" - "pmove %0@,%/tt1\n\t" - ".chip 68k" - : : "a" (&tt1_val) ); - } - else { - __asm__ __volatile__ - ( "movel %0,%/d0\n\t" - ".chip 68040\n\t" - "movec %%d0,%%itt1\n\t" - "movec %%d0,%%dtt1\n\t" - ".chip 68k" - : - : "g" (0xfe00a040) /* Translate 0xfexxxxxx, enable, - * supervisor only, non-cacheable/ - * serialized, writable */ - : "d0" ); - - } - - /* Fetch tos version at Physical 2 */ - /* We my not be able to access this address if the kernel is - loaded to st ram, since the first page is unmapped. On the - Medusa this is always the case and there is nothing we can do - about this, so we just assume the smaller offset. For the TT - we use the fact that in head.S we have set up a mapping - 0xFFxxxxxx -> 0x00xxxxxx, so that the first 16MB is accessible - in the last 16MB of the address space. */ - tos_version = (MACH_IS_MEDUSA || MACH_IS_HADES) ? - 0xfff : *(unsigned short *)0xff000002; - atari_rtc_year_offset = (tos_version < 0x306) ? 70 : 68; + /* Fetch tos version at Physical 2 */ + /* + * We my not be able to access this address if the kernel is + * loaded to st ram, since the first page is unmapped. On the + * Medusa this is always the case and there is nothing we can do + * about this, so we just assume the smaller offset. For the TT + * we use the fact that in head.S we have set up a mapping + * 0xFFxxxxxx -> 0x00xxxxxx, so that the first 16MB is accessible + * in the last 16MB of the address space. + */ + tos_version = (MACH_IS_MEDUSA || MACH_IS_HADES) ? + 0xfff : *(unsigned short *)0xff000002; + atari_rtc_year_offset = (tos_version < 0x306) ? 70 : 68; } #ifdef CONFIG_HEARTBEAT -static void atari_heartbeat( int on ) +static void atari_heartbeat(int on) { - unsigned char tmp; - unsigned long flags; + unsigned char tmp; + unsigned long flags; - if (atari_dont_touch_floppy_select) - return; + if (atari_dont_touch_floppy_select) + return; - local_irq_save(flags); - sound_ym.rd_data_reg_sel = 14; /* Select PSG Port A */ - tmp = sound_ym.rd_data_reg_sel; - sound_ym.wd_data = on ? (tmp & ~0x02) : (tmp | 0x02); - local_irq_restore(flags); + local_irq_save(flags); + sound_ym.rd_data_reg_sel = 14; /* Select PSG Port A */ + tmp = sound_ym.rd_data_reg_sel; + sound_ym.wd_data = on ? (tmp & ~0x02) : (tmp | 0x02); + local_irq_restore(flags); } #endif @@ -526,180 +490,171 @@ static void atari_heartbeat( int on ) /* ++andreas: no need for complicated code, just depend on prefetch */ -static void atari_reset (void) +static void atari_reset(void) { - long tc_val = 0; - long reset_addr; - - /* On the Medusa, phys. 0x4 may contain garbage because it's no - ROM. See above for explanation why we cannot use PTOV(4). */ - reset_addr = MACH_IS_HADES ? 0x7fe00030 : - MACH_IS_MEDUSA || MACH_IS_AB40 ? 0xe00030 : - *(unsigned long *) 0xff000004; - - /* reset ACIA for switch off OverScan, if it's active */ - if (atari_switches & ATARI_SWITCH_OVSC_IKBD) - acia.key_ctrl = ACIA_RESET; - if (atari_switches & ATARI_SWITCH_OVSC_MIDI) - acia.mid_ctrl = ACIA_RESET; - - /* processor independent: turn off interrupts and reset the VBR; - * the caches must be left enabled, else prefetching the final jump - * instruction doesn't work. */ - local_irq_disable(); - __asm__ __volatile__ - ("moveq #0,%/d0\n\t" - "movec %/d0,%/vbr" - : : : "d0" ); - - if (CPU_IS_040_OR_060) { - unsigned long jmp_addr040 = virt_to_phys(&&jmp_addr_label040); - if (CPU_IS_060) { - /* 68060: clear PCR to turn off superscalar operation */ - __asm__ __volatile__ - ("moveq #0,%/d0\n\t" - ".chip 68060\n\t" - "movec %%d0,%%pcr\n\t" - ".chip 68k" - : : : "d0" ); - } - - __asm__ __volatile__ - ("movel %0,%/d0\n\t" - "andl #0xff000000,%/d0\n\t" - "orw #0xe020,%/d0\n\t" /* map 16 MB, enable, cacheable */ - ".chip 68040\n\t" - "movec %%d0,%%itt0\n\t" - "movec %%d0,%%dtt0\n\t" - ".chip 68k\n\t" - "jmp %0@\n\t" - : /* no outputs */ - : "a" (jmp_addr040) - : "d0" ); - jmp_addr_label040: - __asm__ __volatile__ - ("moveq #0,%/d0\n\t" - "nop\n\t" - ".chip 68040\n\t" - "cinva %%bc\n\t" - "nop\n\t" - "pflusha\n\t" - "nop\n\t" - "movec %%d0,%%tc\n\t" - "nop\n\t" - /* the following setup of transparent translations is needed on the - * Afterburner040 to successfully reboot. Other machines shouldn't - * care about a different tt regs setup, they also didn't care in - * the past that the regs weren't turned off. */ - "movel #0xffc000,%%d0\n\t" /* whole insn space cacheable */ - "movec %%d0,%%itt0\n\t" - "movec %%d0,%%itt1\n\t" - "orw #0x40,%/d0\n\t" /* whole data space non-cacheable/ser. */ - "movec %%d0,%%dtt0\n\t" - "movec %%d0,%%dtt1\n\t" - ".chip 68k\n\t" - "jmp %0@" - : /* no outputs */ - : "a" (reset_addr) - : "d0"); - } - else - __asm__ __volatile__ - ("pmove %0@,%/tc\n\t" - "jmp %1@" - : /* no outputs */ - : "a" (&tc_val), "a" (reset_addr)); + long tc_val = 0; + long reset_addr; + + /* + * On the Medusa, phys. 0x4 may contain garbage because it's no + * ROM. See above for explanation why we cannot use PTOV(4). + */ + reset_addr = MACH_IS_HADES ? 0x7fe00030 : + MACH_IS_MEDUSA || MACH_IS_AB40 ? 0xe00030 : + *(unsigned long *) 0xff000004; + + /* reset ACIA for switch off OverScan, if it's active */ + if (atari_switches & ATARI_SWITCH_OVSC_IKBD) + acia.key_ctrl = ACIA_RESET; + if (atari_switches & ATARI_SWITCH_OVSC_MIDI) + acia.mid_ctrl = ACIA_RESET; + + /* processor independent: turn off interrupts and reset the VBR; + * the caches must be left enabled, else prefetching the final jump + * instruction doesn't work. + */ + local_irq_disable(); + asm volatile ("movec %0,%%vbr" + : : "d" (0)); + + if (CPU_IS_040_OR_060) { + unsigned long jmp_addr040 = virt_to_phys(&&jmp_addr_label040); + if (CPU_IS_060) { + /* 68060: clear PCR to turn off superscalar operation */ + asm volatile ("\n" + " .chip 68060\n" + " movec %0,%%pcr\n" + " .chip 68k" + : : "d" (0)); + } + + asm volatile ("\n" + " move.l %0,%%d0\n" + " and.l #0xff000000,%%d0\n" + " or.w #0xe020,%%d0\n" /* map 16 MB, enable, cacheable */ + " .chip 68040\n" + " movec %%d0,%%itt0\n" + " movec %%d0,%%dtt0\n" + " .chip 68k\n" + " jmp %0@" + : : "a" (jmp_addr040) + : "d0"); + jmp_addr_label040: + asm volatile ("\n" + " moveq #0,%%d0\n" + " nop\n" + " .chip 68040\n" + " cinva %%bc\n" + " nop\n" + " pflusha\n" + " nop\n" + " movec %%d0,%%tc\n" + " nop\n" + /* the following setup of transparent translations is needed on the + * Afterburner040 to successfully reboot. Other machines shouldn't + * care about a different tt regs setup, they also didn't care in + * the past that the regs weren't turned off. */ + " move.l #0xffc000,%%d0\n" /* whole insn space cacheable */ + " movec %%d0,%%itt0\n" + " movec %%d0,%%itt1\n" + " or.w #0x40,%/d0\n" /* whole data space non-cacheable/ser. */ + " movec %%d0,%%dtt0\n" + " movec %%d0,%%dtt1\n" + " .chip 68k\n" + " jmp %0@" + : /* no outputs */ + : "a" (reset_addr) + : "d0"); + } else + asm volatile ("\n" + " pmove %0@,%%tc\n" + " jmp %1@" + : /* no outputs */ + : "a" (&tc_val), "a" (reset_addr)); } static void atari_get_model(char *model) { - strcpy(model, "Atari "); - switch (atari_mch_cookie >> 16) { + strcpy(model, "Atari "); + switch (atari_mch_cookie >> 16) { case ATARI_MCH_ST: - if (ATARIHW_PRESENT(MSTE_CLK)) - strcat (model, "Mega ST"); - else - strcat (model, "ST"); - break; + if (ATARIHW_PRESENT(MSTE_CLK)) + strcat(model, "Mega ST"); + else + strcat(model, "ST"); + break; case ATARI_MCH_STE: - if (MACH_IS_MSTE) - strcat (model, "Mega STE"); - else - strcat (model, "STE"); - break; + if (MACH_IS_MSTE) + strcat(model, "Mega STE"); + else + strcat(model, "STE"); + break; case ATARI_MCH_TT: - if (MACH_IS_MEDUSA) - /* Medusa has TT _MCH cookie */ - strcat (model, "Medusa"); - else if (MACH_IS_HADES) - strcat(model, "Hades"); - else - strcat (model, "TT"); - break; + if (MACH_IS_MEDUSA) + /* Medusa has TT _MCH cookie */ + strcat(model, "Medusa"); + else if (MACH_IS_HADES) + strcat(model, "Hades"); + else + strcat(model, "TT"); + break; case ATARI_MCH_FALCON: - strcat (model, "Falcon"); - if (MACH_IS_AB40) - strcat (model, " (with Afterburner040)"); - break; + strcat(model, "Falcon"); + if (MACH_IS_AB40) + strcat(model, " (with Afterburner040)"); + break; default: - sprintf (model + strlen (model), "(unknown mach cookie 0x%lx)", - atari_mch_cookie); - break; - } + sprintf(model + strlen(model), "(unknown mach cookie 0x%lx)", + atari_mch_cookie); + break; + } } static int atari_get_hardware_list(char *buffer) { - int len = 0, i; - - for (i = 0; i < m68k_num_memory; i++) - len += sprintf (buffer+len, "\t%3ld MB at 0x%08lx (%s)\n", - m68k_memory[i].size >> 20, m68k_memory[i].addr, - (m68k_memory[i].addr & 0xff000000 ? - "alternate RAM" : "ST-RAM")); - -#define ATARIHW_ANNOUNCE(name,str) \ - if (ATARIHW_PRESENT(name)) \ - len += sprintf (buffer + len, "\t%s\n", str) - - len += sprintf (buffer + len, "Detected hardware:\n"); - ATARIHW_ANNOUNCE(STND_SHIFTER, "ST Shifter"); - ATARIHW_ANNOUNCE(EXTD_SHIFTER, "STe Shifter"); - ATARIHW_ANNOUNCE(TT_SHIFTER, "TT Shifter"); - ATARIHW_ANNOUNCE(VIDEL_SHIFTER, "Falcon Shifter"); - ATARIHW_ANNOUNCE(YM_2149, "Programmable Sound Generator"); - ATARIHW_ANNOUNCE(PCM_8BIT, "PCM 8 Bit Sound"); - ATARIHW_ANNOUNCE(CODEC, "CODEC Sound"); - ATARIHW_ANNOUNCE(TT_SCSI, "SCSI Controller NCR5380 (TT style)"); - ATARIHW_ANNOUNCE(ST_SCSI, "SCSI Controller NCR5380 (Falcon style)"); - ATARIHW_ANNOUNCE(ACSI, "ACSI Interface"); - ATARIHW_ANNOUNCE(IDE, "IDE Interface"); - ATARIHW_ANNOUNCE(FDCSPEED, "8/16 Mhz Switch for FDC"); - ATARIHW_ANNOUNCE(ST_MFP, "Multi Function Peripheral MFP 68901"); - ATARIHW_ANNOUNCE(TT_MFP, "Second Multi Function Peripheral MFP 68901"); - ATARIHW_ANNOUNCE(SCC, "Serial Communications Controller SCC 8530"); - ATARIHW_ANNOUNCE(ST_ESCC, "Extended Serial Communications Controller SCC 85230"); - ATARIHW_ANNOUNCE(ANALOG_JOY, "Paddle Interface"); - ATARIHW_ANNOUNCE(MICROWIRE, "MICROWIRE(tm) Interface"); - ATARIHW_ANNOUNCE(STND_DMA, "DMA Controller (24 bit)"); - ATARIHW_ANNOUNCE(EXTD_DMA, "DMA Controller (32 bit)"); - ATARIHW_ANNOUNCE(SCSI_DMA, "DMA Controller for NCR5380"); - ATARIHW_ANNOUNCE(SCC_DMA, "DMA Controller for SCC"); - ATARIHW_ANNOUNCE(TT_CLK, "Clock Chip MC146818A"); - ATARIHW_ANNOUNCE(MSTE_CLK, "Clock Chip RP5C15"); - ATARIHW_ANNOUNCE(SCU, "System Control Unit"); - ATARIHW_ANNOUNCE(BLITTER, "Blitter"); - ATARIHW_ANNOUNCE(VME, "VME Bus"); - ATARIHW_ANNOUNCE(DSP56K, "DSP56001 processor"); - - return(len); + int len = 0, i; + + for (i = 0; i < m68k_num_memory; i++) + len += sprintf(buffer+len, "\t%3ld MB at 0x%08lx (%s)\n", + m68k_memory[i].size >> 20, m68k_memory[i].addr, + (m68k_memory[i].addr & 0xff000000 ? + "alternate RAM" : "ST-RAM")); + +#define ATARIHW_ANNOUNCE(name, str) \ + if (ATARIHW_PRESENT(name)) \ + len += sprintf(buffer + len, "\t%s\n", str) + + len += sprintf(buffer + len, "Detected hardware:\n"); + ATARIHW_ANNOUNCE(STND_SHIFTER, "ST Shifter"); + ATARIHW_ANNOUNCE(EXTD_SHIFTER, "STe Shifter"); + ATARIHW_ANNOUNCE(TT_SHIFTER, "TT Shifter"); + ATARIHW_ANNOUNCE(VIDEL_SHIFTER, "Falcon Shifter"); + ATARIHW_ANNOUNCE(YM_2149, "Programmable Sound Generator"); + ATARIHW_ANNOUNCE(PCM_8BIT, "PCM 8 Bit Sound"); + ATARIHW_ANNOUNCE(CODEC, "CODEC Sound"); + ATARIHW_ANNOUNCE(TT_SCSI, "SCSI Controller NCR5380 (TT style)"); + ATARIHW_ANNOUNCE(ST_SCSI, "SCSI Controller NCR5380 (Falcon style)"); + ATARIHW_ANNOUNCE(ACSI, "ACSI Interface"); + ATARIHW_ANNOUNCE(IDE, "IDE Interface"); + ATARIHW_ANNOUNCE(FDCSPEED, "8/16 Mhz Switch for FDC"); + ATARIHW_ANNOUNCE(ST_MFP, "Multi Function Peripheral MFP 68901"); + ATARIHW_ANNOUNCE(TT_MFP, "Second Multi Function Peripheral MFP 68901"); + ATARIHW_ANNOUNCE(SCC, "Serial Communications Controller SCC 8530"); + ATARIHW_ANNOUNCE(ST_ESCC, "Extended Serial Communications Controller SCC 85230"); + ATARIHW_ANNOUNCE(ANALOG_JOY, "Paddle Interface"); + ATARIHW_ANNOUNCE(MICROWIRE, "MICROWIRE(tm) Interface"); + ATARIHW_ANNOUNCE(STND_DMA, "DMA Controller (24 bit)"); + ATARIHW_ANNOUNCE(EXTD_DMA, "DMA Controller (32 bit)"); + ATARIHW_ANNOUNCE(SCSI_DMA, "DMA Controller for NCR5380"); + ATARIHW_ANNOUNCE(SCC_DMA, "DMA Controller for SCC"); + ATARIHW_ANNOUNCE(TT_CLK, "Clock Chip MC146818A"); + ATARIHW_ANNOUNCE(MSTE_CLK, "Clock Chip RP5C15"); + ATARIHW_ANNOUNCE(SCU, "System Control Unit"); + ATARIHW_ANNOUNCE(BLITTER, "Blitter"); + ATARIHW_ANNOUNCE(VME, "VME Bus"); + ATARIHW_ANNOUNCE(DSP56K, "DSP56001 processor"); + + return len; } - -/* - * Local variables: - * c-indent-level: 4 - * tab-width: 8 - * End: - */ |
