diff options
Diffstat (limited to 'arch/ia64')
76 files changed, 4863 insertions, 2919 deletions
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 3deced6..1642375 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -60,10 +60,9 @@ choice config IA64_GENERIC bool "generic" + select ACPI select NUMA select ACPI_NUMA - select VIRTUAL_MEM_MAP - select DISCONTIGMEM help This selects the system type of your hardware. A "generic" kernel will run on any supported IA-64 system. However, if you configure @@ -175,40 +174,6 @@ config IA64_L1_CACHE_SHIFT default "6" if ITANIUM # align cache-sensitive data to 64 bytes -config NUMA - bool "NUMA support" - depends on !IA64_HP_SIM - default y if IA64_SGI_SN2 - select ACPI_NUMA - help - Say Y to compile the kernel to support NUMA (Non-Uniform Memory - Access). This option is for configuring high-end multiprocessor - server systems. If in doubt, say N. - -config VIRTUAL_MEM_MAP - bool "Virtual mem map" - default y if !IA64_HP_SIM - help - Say Y to compile the kernel with support for a virtual mem map. - This code also only takes effect if a memory hole of greater than - 1 Gb is found during boot. You must turn this option on if you - require the DISCONTIGMEM option for your machine. If you are - unsure, say Y. - -config HOLES_IN_ZONE - bool - default y if VIRTUAL_MEM_MAP - -config ARCH_DISCONTIGMEM_ENABLE - bool "Discontiguous memory support" - depends on (IA64_DIG || IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB) && NUMA && VIRTUAL_MEM_MAP - default y if (IA64_SGI_SN2 || IA64_GENERIC) && NUMA - help - Say Y to support efficient handling of discontiguous physical memory, - for architectures which are either NUMA (Non-Uniform Memory Access) - or have huge holes in the physical address space for other reasons. - See <file:Documentation/vm/numa> for more. - config IA64_CYCLONE bool "Cyclone (EXA) Time Source support" help @@ -231,8 +196,10 @@ config IA64_SGI_SN_XP based on a network adapter and DMA messaging. config FORCE_MAX_ZONEORDER - int - default "18" + int "MAX_ORDER (11 - 17)" if !HUGETLB_PAGE + range 11 17 if !HUGETLB_PAGE + default "17" if HUGETLB_PAGE + default "11" config SMP bool "Symmetric multi-processing support" @@ -253,8 +220,8 @@ config SMP If you don't know what to do here, say N. config NR_CPUS - int "Maximum number of CPUs (2-512)" - range 2 512 + int "Maximum number of CPUs (2-1024)" + range 2 1024 depends on SMP default "64" help @@ -297,10 +264,57 @@ config PREEMPT source "mm/Kconfig" -config HAVE_DEC_LOCK +config ARCH_SELECT_MEMORY_MODEL + def_bool y + +config ARCH_DISCONTIGMEM_ENABLE + def_bool y + help + Say Y to support efficient handling of discontiguous physical memory, + for architectures which are either NUMA (Non-Uniform Memory Access) + or have huge holes in the physical address space for other reasons. + See <file:Documentation/vm/numa> for more. + +config ARCH_FLATMEM_ENABLE + def_bool y + +config ARCH_SPARSEMEM_ENABLE + def_bool y + depends on ARCH_DISCONTIGMEM_ENABLE + +config ARCH_DISCONTIGMEM_DEFAULT + def_bool y if (IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB) + depends on ARCH_DISCONTIGMEM_ENABLE + +config NUMA + bool "NUMA support" + depends on !IA64_HP_SIM && !FLATMEM + default y if IA64_SGI_SN2 + help + Say Y to compile the kernel to support NUMA (Non-Uniform Memory + Access). This option is for configuring high-end multiprocessor + server systems. If in doubt, say N. + +# VIRTUAL_MEM_MAP and FLAT_NODE_MEM_MAP are functionally equivalent. +# VIRTUAL_MEM_MAP has been retained for historical reasons. +config VIRTUAL_MEM_MAP + bool "Virtual mem map" + depends on !SPARSEMEM + default y if !IA64_HP_SIM + help + Say Y to compile the kernel with support for a virtual mem map. + This code also only takes effect if a memory hole of greater than + 1 Gb is found during boot. You must turn this option on if you + require the DISCONTIGMEM option for your machine. If you are + unsure, say Y. + +config HOLES_IN_ZONE bool - depends on (SMP || PREEMPT) - default y + default y if VIRTUAL_MEM_MAP + +config HAVE_ARCH_EARLY_PFN_TO_NID + def_bool y + depends on NEED_MULTIPLE_NODES config IA32_SUPPORT bool "Support for Linux/x86 binaries" @@ -338,11 +352,6 @@ config IA64_PALINFO To use this option, you have to ensure that the "/proc file system support" (CONFIG_PROC_FS) is enabled, too. -config ACPI_DEALLOCATE_IRQ - bool - depends on IOSAPIC && EXPERIMENTAL - default y - source "drivers/firmware/Kconfig" source "fs/Kconfig.binfmt" @@ -351,38 +360,10 @@ endmenu menu "Power management and ACPI" -config PM - bool "Power Management support" - depends on !IA64_HP_SIM - default y - help - "Power Management" means that parts of your computer are shut - off or put into a power conserving "sleep" mode if they are not - being used. There are two competing standards for doing this: APM - and ACPI. If you want to use either one, say Y here and then also - to the requisite support below. - - Power Management is most important for battery powered laptop - computers; if you have a laptop, check out the Linux Laptop home - page on the WWW at <http://www.linux-on-laptops.com/> and the - Battery Powered Linux mini-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - Note that, even if you say N here, Linux on the x86 architecture - will issue the hlt instruction if nothing is to be done, thereby - sending the processor to sleep and saving power. - -config ACPI - bool - depends on !IA64_HP_SIM - default y - -if !IA64_HP_SIM +source "kernel/power/Kconfig" source "drivers/acpi/Kconfig" -endif - if PM source "arch/ia64/kernel/cpufreq/Kconfig" @@ -434,6 +415,11 @@ config GENERIC_IRQ_PROBE bool default y +config GENERIC_PENDING_IRQ + bool + depends on GENERIC_HARDIRQS && SMP + default y + source "arch/ia64/hp/sim/Kconfig" source "arch/ia64/oprofile/Kconfig" diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile index f9bd88a..67932ad 100644 --- a/arch/ia64/Makefile +++ b/arch/ia64/Makefile @@ -82,24 +82,7 @@ unwcheck: vmlinux archclean: $(Q)$(MAKE) $(clean)=$(boot) -CLEAN_FILES += include/asm-ia64/.offsets.h.stamp vmlinux.gz bootloader - -MRPROPER_FILES += include/asm-ia64/offsets.h - -prepare: include/asm-ia64/offsets.h - -arch/ia64/kernel/asm-offsets.s: include/asm include/linux/version.h include/config/MARKER - -include/asm-ia64/offsets.h: arch/ia64/kernel/asm-offsets.s - $(call filechk,gen-asm-offsets) - -arch/ia64/kernel/asm-offsets.s: include/asm-ia64/.offsets.h.stamp - -include/asm-ia64/.offsets.h.stamp: - mkdir -p include/asm-ia64 - [ -s include/asm-ia64/offsets.h ] \ - || echo "#define IA64_TASK_SIZE 0" > include/asm-ia64/offsets.h - touch $@ +CLEAN_FILES += vmlinux.gz bootloader boot: lib/lib.a vmlinux $(Q)$(MAKE) $(build)=$(boot) $@ diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig index b95fcf8..b40672b 100644 --- a/arch/ia64/configs/bigsur_defconfig +++ b/arch/ia64/configs/bigsur_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.10-rc2 -# Mon Nov 29 13:27:48 2004 +# Linux kernel version: 2.6.14-rc1 +# Wed Sep 14 15:18:49 2005 # # @@ -10,34 +10,40 @@ CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=16 CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 # # Loadable module support @@ -58,12 +64,15 @@ CONFIG_IA64=y CONFIG_64BIT=y CONFIG_MMU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_INTERPOLATION=y CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_IA64_GENERIC is not set CONFIG_IA64_DIG=y # CONFIG_IA64_HP_ZX1 is not set +# CONFIG_IA64_HP_ZX1_SWIOTLB is not set # CONFIG_IA64_SGI_SN2 is not set # CONFIG_IA64_HP_SIM is not set CONFIG_ITANIUM=y @@ -72,17 +81,30 @@ CONFIG_ITANIUM=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 CONFIG_IA64_BRL_EMU=y CONFIG_IA64_L1_CACHE_SHIFT=6 # CONFIG_NUMA is not set # CONFIG_VIRTUAL_MEM_MAP is not set # CONFIG_IA64_CYCLONE is not set CONFIG_IOSAPIC=y +# CONFIG_IA64_SGI_SN_XP is not set CONFIG_FORCE_MAX_ZONEORDER=18 CONFIG_SMP=y CONFIG_NR_CPUS=2 # CONFIG_HOTPLUG_CPU is not set +# CONFIG_SCHED_SMT is not set CONFIG_PREEMPT=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_HAVE_DEC_LOCK=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y @@ -95,6 +117,7 @@ CONFIG_IA64_PALINFO=y # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y +# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m @@ -102,24 +125,26 @@ CONFIG_BINFMT_MISC=m # Power management and ACPI # CONFIG_PM=y -CONFIG_ACPI=y +# CONFIG_PM_DEBUG is not set # # ACPI (Advanced Configuration and Power Interface) Support # -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_INTERPRETER=y +CONFIG_ACPI=y CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_VIDEO=m CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_THERMAL=m CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y +# CONFIG_ACPI_CONTAINER is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA) @@ -128,7 +153,7 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCI Hotplug Support @@ -141,8 +166,70 @@ CONFIG_PCI_NAMES=y # CONFIG_PCCARD is not set # -# PC-card bridges +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing # +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -157,6 +244,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -169,7 +261,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Plug and Play support # -# CONFIG_PNP is not set +CONFIG_PNP=y +# CONFIG_PNP_DEBUG is not set + +# +# Protocols +# +CONFIG_PNPACPI=y # # Block devices @@ -178,14 +276,15 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -195,6 +294,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support @@ -217,7 +317,8 @@ CONFIG_BLK_DEV_IDEFLOPPY=m # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=m +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set @@ -239,6 +340,7 @@ CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=m +# CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set @@ -256,6 +358,7 @@ CONFIG_IDEDMA_AUTO=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -267,6 +370,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -280,6 +384,8 @@ CONFIG_SCSI_LOGGING=y # CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers @@ -294,18 +400,13 @@ CONFIG_SCSI_SPI_ATTRS=m # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y # CONFIG_SCSI_QLOGIC_1280_1040 is not set @@ -315,7 +416,8 @@ CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA6322 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set @@ -338,11 +440,14 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m +# CONFIG_DM_MULTIPATH is not set # # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set # # IEEE 1394 (FireWire) support @@ -355,72 +460,14 @@ CONFIG_DM_ZERO=m # CONFIG_I2O is not set # -# Networking support +# Network device support # -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_NET_SB1000 is not set # # ARCnet devices @@ -428,6 +475,11 @@ CONFIG_DUMMY=y # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y @@ -449,7 +501,6 @@ CONFIG_NET_PCI=y # CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set CONFIG_EEPRO100=y -# CONFIG_EEPRO100_PIO is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -471,13 +522,17 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -502,6 +557,8 @@ CONFIG_EEPRO100=y # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -531,18 +588,6 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_CT82C710 is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set - -# # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y @@ -560,6 +605,17 @@ CONFIG_MOUSE_PS2=y # CONFIG_INPUT_MISC is not set # +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# # Character devices # CONFIG_VT=y @@ -577,7 +633,6 @@ CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # @@ -585,6 +640,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -609,14 +665,22 @@ CONFIG_EFI_RTC=y # CONFIG_AGP=m CONFIG_AGP_I460=m -CONFIG_DRM=y +CONFIG_DRM=m # CONFIG_DRM_TDFX is not set CONFIG_DRM_R128=m # CONFIG_DRM_RADEON is not set # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HPET is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set # # I2C support @@ -641,7 +705,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set -# CONFIG_I2C_ISA is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -657,16 +721,43 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_PCA_ISA is not set # -# Hardware Sensors Chip support +# Miscellaneous I2C Chip support # -# CONFIG_I2C_SENSOR is not set +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set @@ -677,33 +768,26 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # -# Other I2C Chip support -# -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus +# Misc devices # -# CONFIG_W1 is not set # -# Misc devices +# Multimedia Capabilities Port drivers # # @@ -758,11 +842,12 @@ CONFIG_SND_OPL3_LIB=m # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m # # PCI devices # -CONFIG_SND_AC97_CODEC=m # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -774,6 +859,8 @@ CONFIG_SND_AC97_CODEC=m # CONFIG_SND_CS46XX is not set CONFIG_SND_CS4281=m # CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set @@ -781,9 +868,10 @@ CONFIG_SND_CS4281=m # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_YMFPCI is not set -# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_AD1889 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set @@ -797,13 +885,14 @@ CONFIG_SND_CS4281=m # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set # # USB devices # # CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_USX2Y is not set # # Open Sound System @@ -813,6 +902,8 @@ CONFIG_SND_CS4281=m # # USB support # +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set @@ -824,35 +915,38 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y # # USB Host Controller Drivers # # CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=m +# CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # -CONFIG_USB_AUDIO=m +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set CONFIG_USB_BLUETOOTH_TTY=m -CONFIG_USB_MIDI=m CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_RW_DETECT is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_HP8200e is not set +# CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # # USB Input Devices @@ -869,19 +963,23 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_MOUSE is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_HPUSBSCSI is not set # # USB Multimedia devices @@ -900,6 +998,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y # # USB port drivers @@ -915,7 +1014,6 @@ CONFIG_USB_HIDDEV=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set -# CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set @@ -924,10 +1022,12 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # -# USB ATM/DSL drivers +# USB DSL modem support # # @@ -936,10 +1036,25 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_GADGET is not set # +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set @@ -951,17 +1066,20 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=y -# CONFIG_XFS_RT is not set +CONFIG_XFS_EXPORT=y CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_QUOTACTL=y CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -988,14 +1106,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -CONFIG_DEVPTS_FS_XATTR=y -CONFIG_DEVPTS_FS_SECURITY=y CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -1019,15 +1134,18 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=m CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_RPCSEC_GSS_KRB5=m @@ -1037,9 +1155,11 @@ CONFIG_CIFS=m CONFIG_CIFS_STATS=y CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -1109,8 +1229,12 @@ CONFIG_NLS_UTF8=m # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y # # Profiling support @@ -1121,14 +1245,20 @@ CONFIG_OPROFILE=y # # Kernel hacking # +# CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_KPROBES is not set # CONFIG_IA64_GRANULE_16MB is not set CONFIG_IA64_GRANULE_64MB=y # CONFIG_IA64_PRINT_HAZARDS is not set @@ -1155,6 +1285,7 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set @@ -1170,3 +1301,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig new file mode 100644 index 0000000..80f8663 --- /dev/null +++ b/arch/ia64/configs/gensparse_defconfig @@ -0,0 +1,1319 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc2 +# Wed Sep 28 08:27:29 2005 +# + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y + +# +# Processor type and features +# +CONFIG_IA64=y +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_TIME_INTERPOLATION=y +CONFIG_EFI=y +CONFIG_GENERIC_IOMAP=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_IA64_GENERIC=y +# CONFIG_IA64_DIG is not set +# CONFIG_IA64_HP_ZX1 is not set +# CONFIG_IA64_HP_ZX1_SWIOTLB is not set +# CONFIG_IA64_SGI_SN2 is not set +# CONFIG_IA64_HP_SIM is not set +# CONFIG_ITANIUM is not set +CONFIG_MCKINLEY=y +# CONFIG_IA64_PAGE_SIZE_4KB is not set +# CONFIG_IA64_PAGE_SIZE_8KB is not set +CONFIG_IA64_PAGE_SIZE_16KB=y +# CONFIG_IA64_PAGE_SIZE_64KB is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_IA64_L1_CACHE_SHIFT=7 +CONFIG_IA64_CYCLONE=y +CONFIG_IOSAPIC=y +# CONFIG_IA64_SGI_SN_XP is not set +CONFIG_FORCE_MAX_ZONEORDER=17 +CONFIG_SMP=y +CONFIG_NR_CPUS=512 +CONFIG_HOTPLUG_CPU=y +# CONFIG_SCHED_SMT is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_MEMORY_PRESENT=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y +CONFIG_NUMA=y +CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y +CONFIG_IA32_SUPPORT=y +CONFIG_COMPAT=y +CONFIG_IA64_MCA_RECOVERY=y +CONFIG_PERFMON=y +CONFIG_IA64_PALINFO=y + +# +# Firmware Drivers +# +CONFIG_EFI_VARS=y +CONFIG_EFI_PCDP=y +# CONFIG_DELL_RBU is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=m + +# +# Power management and ACPI +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set + +# +# ACPI (Advanced Configuration and Power Interface) Support +# +CONFIG_ACPI=y +CONFIG_ACPI_BUTTON=m +CONFIG_ACPI_FAN=m +CONFIG_ACPI_PROCESSOR=m +CONFIG_ACPI_HOTPLUG_CPU=y +CONFIG_ACPI_THERMAL=m +CONFIG_ACPI_NUMA=y +CONFIG_ACPI_BLACKLIST_YEAR=0 +# CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_POWER=y +CONFIG_ACPI_SYSTEM=y +CONFIG_ACPI_CONTAINER=m + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Bus options (PCI, PCMCIA) +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCI_DEBUG is not set + +# +# PCI Hotplug Support +# +CONFIG_HOTPLUG_PCI=m +# CONFIG_HOTPLUG_PCI_FAKE is not set +CONFIG_HOTPLUG_PCI_ACPI=m +# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set +# CONFIG_HOTPLUG_PCI_SGI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +CONFIG_ARPD=y +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNP is not set + +# +# Block devices +# +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +CONFIG_BLK_DEV_IDEFLOPPY=y +CONFIG_BLK_DEV_IDESCSI=m +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_SHARE_IRQ is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +CONFIG_BLK_DEV_CMD64X=y +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +CONFIG_BLK_DEV_PIIX=y +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +CONFIG_BLK_DEV_SGIIOC4=y +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=m +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_FC_ATTRS=y +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +CONFIG_SCSI_SATA=y +# CONFIG_SCSI_SATA_AHCI is not set +# CONFIG_SCSI_SATA_SVW is not set +# CONFIG_SCSI_ATA_PIIX is not set +# CONFIG_SCSI_SATA_MV is not set +# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_SX4 is not set +# CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIS is not set +# CONFIG_SCSI_SATA_ULI is not set +# CONFIG_SCSI_SATA_VIA is not set +CONFIG_SCSI_SATA_VITESSE=y +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +CONFIG_SCSI_QLOGIC_1280=y +# CONFIG_SCSI_QLOGIC_1280_1040 is not set +CONFIG_SCSI_QLA2XXX=y +CONFIG_SCSI_QLA21XX=m +CONFIG_SCSI_QLA22XX=m +CONFIG_SCSI_QLA2300=m +CONFIG_SCSI_QLA2322=m +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +# CONFIG_MD_RAID10 is not set +CONFIG_MD_RAID5=m +CONFIG_MD_RAID6=m +CONFIG_MD_MULTIPATH=m +# CONFIG_MD_FAULTY is not set +CONFIG_BLK_DEV_DM=m +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +# CONFIG_DM_MULTIPATH_EMC is not set + +# +# Fusion MPT device support +# +CONFIG_FUSION=y +CONFIG_FUSION_SPI=y +CONFIG_FUSION_FC=m +CONFIG_FUSION_MAX_SGE=128 +# CONFIG_FUSION_CTL is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +CONFIG_NET_TULIP=y +# CONFIG_DE2104X is not set +CONFIG_TULIP=m +# CONFIG_TULIP_MWI is not set +# CONFIG_TULIP_MMIO is not set +# CONFIG_TULIP_NAPI is not set +# CONFIG_DE4X5 is not set +# CONFIG_WINBOND_840 is not set +# CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +CONFIG_EEPRO100=m +CONFIG_E100=m +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_TIGON3=y +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=y +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +CONFIG_GAMEPORT=m +# CONFIG_GAMEPORT_NS558 is not set +# CONFIG_GAMEPORT_L4 is not set +# CONFIG_GAMEPORT_EMU10K1 is not set +# CONFIG_GAMEPORT_FM801 is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_N_HDLC is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_STALDRV is not set +CONFIG_SGI_SNSC=y +CONFIG_SGI_TIOCX=y +CONFIG_SGI_MBCS=m + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_ACPI=y +CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_SGI_L1_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_SGI_IOC4=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +CONFIG_EFI_RTC=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +CONFIG_AGP=m +CONFIG_AGP_I460=m +CONFIG_AGP_HP_ZX1=m +CONFIG_AGP_SGI_TIOCA=m +CONFIG_DRM=m +CONFIG_DRM_TDFX=m +CONFIG_DRM_R128=m +CONFIG_DRM_RADEON=m +CONFIG_DRM_MGA=m +CONFIG_DRM_SIS=m +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set +CONFIG_RAW_DRIVER=m +CONFIG_HPET=y +# CONFIG_HPET_RTC_IRQ is not set +CONFIG_HPET_MMAP=y +CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set +CONFIG_MMTIMER=y + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_VERBOSE_PRINTK=y +# CONFIG_SND_DEBUG is not set +CONFIG_SND_GENERIC_DRIVER=y + +# +# Generic devices +# +CONFIG_SND_MPU401_UART=m +CONFIG_SND_OPL3_LIB=m +CONFIG_SND_DUMMY=m +CONFIG_SND_VIRMIDI=m +CONFIG_SND_MTPAV=m +CONFIG_SND_SERIAL_U16550=m +CONFIG_SND_MPU401=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +CONFIG_SND_CS46XX=m +CONFIG_SND_CS46XX_NEW_DSP=y +CONFIG_SND_CS4281=m +CONFIG_SND_EMU10K1=m +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +CONFIG_SND_FM801=m +# CONFIG_SND_FM801_TEA575X is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=m +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set +# CONFIG_USB_BLUETOOTH_TTY is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +CONFIG_INFINIBAND=m +# CONFIG_INFINIBAND_USER_MAD is not set +# CONFIG_INFINIBAND_USER_ACCESS is not set +CONFIG_INFINIBAND_MTHCA=m +# CONFIG_INFINIBAND_MTHCA_DEBUG is not set +CONFIG_INFINIBAND_IPOIB=m +# CONFIG_INFINIBAND_IPOIB_DEBUG is not set + +# +# SN Devices +# +CONFIG_SGI_IOC4=y + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=y +CONFIG_XFS_EXPORT=y +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_RW is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +CONFIG_SGI_PARTITION=y +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +CONFIG_EFI_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y + +# +# HP Simulator drivers +# +# CONFIG_HP_SIMETH is not set +# CONFIG_HP_SIMSERIAL is not set +# CONFIG_HP_SIMSCSI is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=20 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_KPROBES is not set +CONFIG_IA64_GRANULE_16MB=y +# CONFIG_IA64_GRANULE_64MB is not set +# CONFIG_IA64_PRINT_HAZARDS is not set +# CONFIG_DISABLE_VHPT is not set +# CONFIG_IA64_DEBUG_CMPXCHG is not set +# CONFIG_IA64_DEBUG_IRQ is not set +CONFIG_SYSVIPC_COMPAT=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index dccf35c..08112ab 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -111,7 +111,6 @@ CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y -CONFIG_ACPI_DEALLOCATE_IRQ=y # # Firmware Drivers @@ -130,19 +129,12 @@ CONFIG_ACPI=y # # ACPI (Advanced Configuration and Power Interface) Support # -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_INTERPRETER=y # CONFIG_ACPI_BUTTON is not set -CONFIG_ACPI_VIDEO=m -CONFIG_ACPI_HOTKEY=m # CONFIG_ACPI_FAN is not set # CONFIG_ACPI_PROCESSOR is not set CONFIG_ACPI_NUMA=y -CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index c853cfc..9bc8bca 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc6-tiger-smp -# Wed Aug 17 10:19:51 2005 +# Linux kernel version: 2.6.14-rc1 +# Wed Sep 14 15:17:57 2005 # # @@ -16,6 +16,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -27,6 +28,7 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y @@ -103,19 +105,20 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_HAVE_DEC_LOCK=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y -CONFIG_ACPI_DEALLOCATE_IRQ=y # # Firmware Drivers # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y +# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m @@ -123,27 +126,27 @@ CONFIG_BINFMT_MISC=m # Power management and ACPI # CONFIG_PM=y -CONFIG_ACPI=y +# CONFIG_PM_DEBUG is not set # # ACPI (Advanced Configuration and Power Interface) Support # -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_INTERPRETER=y +CONFIG_ACPI=y CONFIG_ACPI_BUTTON=m -# CONFIG_ACPI_VIDEO is not set -# CONFIG_ACPI_HOTKEY is not set CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m -# CONFIG_ACPI_HOTPLUG_CPU is not set +CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=m CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y -# CONFIG_ACPI_CONTAINER is not set +CONFIG_ACPI_CONTAINER=m + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA) @@ -152,7 +155,6 @@ CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set # @@ -196,14 +198,19 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set # +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set @@ -226,9 +233,11 @@ CONFIG_TCP_CONG_BIC=y # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -243,6 +252,11 @@ CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -255,7 +269,13 @@ CONFIG_FW_LOADER=m # # Plug and Play support # -# CONFIG_PNP is not set +CONFIG_PNP=y +# CONFIG_PNP_DEBUG is not set + +# +# Protocols +# +CONFIG_PNPACPI=y # # Block devices @@ -274,7 +294,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -307,7 +326,8 @@ CONFIG_BLK_DEV_IDESCSI=m # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_SHARE_IRQ is not set # CONFIG_BLK_DEV_OFFBOARD is not set @@ -347,6 +367,7 @@ CONFIG_IDEDMA_AUTO=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -374,6 +395,7 @@ CONFIG_CHR_DEV_SG=m CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers @@ -462,6 +484,7 @@ CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_NET_SB1000 is not set # # ARCnet devices @@ -469,6 +492,11 @@ CONFIG_DUMMY=m # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y @@ -489,6 +517,7 @@ CONFIG_TULIP=m # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set @@ -520,6 +549,7 @@ CONFIG_E1000=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set @@ -529,6 +559,7 @@ CONFIG_TIGON3=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -626,6 +657,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set @@ -683,6 +715,7 @@ CONFIG_DRM_RADEON=m CONFIG_DRM_MGA=m CONFIG_DRM_SIS=m # CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set CONFIG_RAW_DRIVER=m CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set @@ -699,7 +732,6 @@ CONFIG_MAX_RAW_DEVS=256 # I2C support # # CONFIG_I2C is not set -# CONFIG_I2C_SENSOR is not set # # Dallas's 1-wire bus @@ -710,6 +742,7 @@ CONFIG_MAX_RAW_DEVS=256 # Hardware Monitoring support # CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_HWMON_DEBUG_CHIP is not set # @@ -717,6 +750,10 @@ CONFIG_HWMON=y # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -808,9 +845,11 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_MTOUCH is not set # CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices @@ -910,16 +949,12 @@ CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=y CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y @@ -927,6 +962,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -955,13 +991,11 @@ CONFIG_NTFS_FS=m CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -CONFIG_TMPFS_XATTR=y -CONFIG_TMPFS_SECURITY=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -1011,6 +1045,7 @@ CONFIG_CIFS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -1080,10 +1115,12 @@ CONFIG_NLS_UTF8=m # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y # # Profiling support @@ -1097,6 +1134,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=20 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig index 88e8867..0856ca6 100644 --- a/arch/ia64/configs/zx1_defconfig +++ b/arch/ia64/configs/zx1_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc6 -# Wed Aug 17 10:02:43 2005 +# Linux kernel version: 2.6.14-rc1 +# Wed Sep 14 15:15:01 2005 # # @@ -18,6 +18,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set @@ -29,6 +30,7 @@ CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set # CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set @@ -103,19 +105,20 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_HAVE_DEC_LOCK=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y -CONFIG_ACPI_DEALLOCATE_IRQ=y # # Firmware Drivers # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y +# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y @@ -123,35 +126,34 @@ CONFIG_BINFMT_MISC=y # Power management and ACPI # CONFIG_PM=y -CONFIG_ACPI=y +# CONFIG_PM_DEBUG is not set # # ACPI (Advanced Configuration and Power Interface) Support # -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_INTERPRETER=y +CONFIG_ACPI=y CONFIG_ACPI_BUTTON=y -CONFIG_ACPI_VIDEO=m -CONFIG_ACPI_HOTKEY=m CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_CONTAINER is not set # +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# # Bus options (PCI, PCMCIA) # CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set # @@ -195,8 +197,8 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y @@ -212,7 +214,6 @@ CONFIG_NETFILTER=y # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set CONFIG_IP_NF_ARPTABLES=y @@ -220,6 +221,11 @@ CONFIG_IP_NF_ARPTABLES=y # CONFIG_IP_NF_ARP_MANGLE is not set # +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set @@ -242,9 +248,11 @@ CONFIG_IP_NF_ARPTABLES=y # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NETFILTER_NETLINK is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -259,6 +267,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -271,7 +284,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Plug and Play support # -# CONFIG_PNP is not set +CONFIG_PNP=y +# CONFIG_PNP_DEBUG is not set + +# +# Protocols +# +CONFIG_PNPACPI=y # # Block devices @@ -290,7 +309,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -323,7 +341,8 @@ CONFIG_BLK_DEV_IDECD=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set @@ -362,6 +381,7 @@ CONFIG_BLK_DEV_IDEDMA=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -389,6 +409,7 @@ CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers @@ -465,6 +486,7 @@ CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_NET_SB1000 is not set # # ARCnet devices @@ -472,6 +494,11 @@ CONFIG_DUMMY=y # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y @@ -493,6 +520,7 @@ CONFIG_TULIP_NAPI_HW_MITIGATION=y # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set @@ -524,6 +552,7 @@ CONFIG_E1000=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set @@ -533,6 +562,7 @@ CONFIG_TIGON3=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -658,12 +688,12 @@ CONFIG_AGP=y CONFIG_AGP_HP_ZX1=y CONFIG_DRM=y # CONFIG_DRM_TDFX is not set -# CONFIG_DRM_GAMMA is not set # CONFIG_DRM_R128 is not set CONFIG_DRM_RADEON=y # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set # CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HPET is not set # CONFIG_HANGCHECK_TIMER is not set @@ -697,7 +727,6 @@ CONFIG_I2C_ALGOPCF=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_ISA is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -711,7 +740,6 @@ CONFIG_I2C_ALGOPCF=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set -# CONFIG_I2C_SENSOR is not set # # Miscellaneous I2C Chip support @@ -738,12 +766,17 @@ CONFIG_I2C_ALGOPCF=y # Hardware Monitoring support # # CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set # # Misc devices # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # CONFIG_VIDEO_DEV=y @@ -814,6 +847,7 @@ CONFIG_FB_RADEON_DEBUG=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_S1D13XXX is not set @@ -870,11 +904,12 @@ CONFIG_SND_OPL3_LIB=y # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_AC97_BUS=y # # PCI devices # -CONFIG_SND_AC97_CODEC=y # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -898,7 +933,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_HDSPM is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_YMFPCI is not set -# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_AD1889 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set @@ -960,9 +995,8 @@ CONFIG_USB_UHCI_HCD=y # # USB Device Class drivers # -# CONFIG_USB_AUDIO is not set +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set @@ -979,6 +1013,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # # USB Input Devices @@ -995,9 +1030,11 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_MTOUCH is not set # CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices @@ -1096,10 +1133,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -1108,6 +1141,7 @@ CONFIG_FS_MBCACHE=y CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -1134,13 +1168,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -CONFIG_TMPFS_XATTR=y -CONFIG_TMPFS_SECURITY=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -1185,6 +1217,7 @@ CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -1254,10 +1287,12 @@ CONFIG_NLS_UTF8=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y # # Profiling support @@ -1271,6 +1306,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index 8444add..6e3f147 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12 -# Tue Jun 21 11:30:42 2005 +# Linux kernel version: 2.6.14-rc1 +# Wed Sep 14 15:13:03 2005 # # @@ -16,6 +16,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y @@ -27,6 +28,7 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +CONFIG_INITRAMFS_SOURCE="" # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y @@ -80,6 +82,10 @@ CONFIG_MCKINLEY=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 CONFIG_IA64_L1_CACHE_SHIFT=7 CONFIG_NUMA=y CONFIG_VIRTUAL_MEM_MAP=y @@ -87,25 +93,34 @@ CONFIG_HOLES_IN_ZONE=y CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_IA64_CYCLONE=y CONFIG_IOSAPIC=y +# CONFIG_IA64_SGI_SN_XP is not set CONFIG_FORCE_MAX_ZONEORDER=18 CONFIG_SMP=y CONFIG_NR_CPUS=512 CONFIG_HOTPLUG_CPU=y # CONFIG_SCHED_SMT is not set # CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set CONFIG_HAVE_DEC_LOCK=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y -CONFIG_ACPI_DEALLOCATE_IRQ=y # # Firmware Drivers # CONFIG_EFI_VARS=y CONFIG_EFI_PCDP=y +# CONFIG_DELL_RBU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m @@ -113,15 +128,13 @@ CONFIG_BINFMT_MISC=m # Power management and ACPI # CONFIG_PM=y -CONFIG_ACPI=y +# CONFIG_PM_DEBUG is not set # # ACPI (Advanced Configuration and Power Interface) Support # -CONFIG_ACPI_BOOT=y -CONFIG_ACPI_INTERPRETER=y +CONFIG_ACPI=y CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_VIDEO=m CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_HOTPLUG_CPU=y @@ -129,20 +142,22 @@ CONFIG_ACPI_THERMAL=m CONFIG_ACPI_NUMA=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y -CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y CONFIG_ACPI_CONTAINER=m # +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# # Bus options (PCI, PCMCIA) # CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set # @@ -154,6 +169,7 @@ CONFIG_HOTPLUG_PCI_ACPI=m # CONFIG_HOTPLUG_PCI_ACPI_IBM is not set # CONFIG_HOTPLUG_PCI_CPCI is not set # CONFIG_HOTPLUG_PCI_SHPC is not set +# CONFIG_HOTPLUG_PCI_SGI is not set # # PCCARD (PCMCIA/CardBus) support @@ -161,6 +177,73 @@ CONFIG_HOTPLUG_PCI_ACPI=m # CONFIG_PCCARD is not set # +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +CONFIG_ARPD=y +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# # Device Drivers # @@ -169,10 +252,15 @@ CONFIG_HOTPLUG_PCI_ACPI=m # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# # Memory Technology Devices (MTD) # # CONFIG_MTD is not set @@ -185,7 +273,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # # Plug and Play support # -# CONFIG_PNP is not set +CONFIG_PNP=y +# CONFIG_PNP_DEBUG is not set + +# +# Protocols +# +CONFIG_PNPACPI=y # # Block devices @@ -204,7 +298,6 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set # @@ -237,7 +330,8 @@ CONFIG_BLK_DEV_IDESCSI=m # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_SHARE_IRQ is not set # CONFIG_BLK_DEV_OFFBOARD is not set @@ -259,6 +353,7 @@ CONFIG_BLK_DEV_CMD64X=y # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y +# CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set @@ -277,6 +372,7 @@ CONFIG_IDEDMA_AUTO=y # # SCSI device support # +# CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y @@ -304,6 +400,7 @@ CONFIG_CHR_DEV_SG=m CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # # SCSI low-level drivers @@ -321,6 +418,7 @@ CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set +# CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_QSTOR is not set @@ -341,8 +439,7 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set -CONFIG_SCSI_QLOGIC_FC=y -# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set +# CONFIG_SCSI_QLOGIC_FC is not set CONFIG_SCSI_QLOGIC_1280=y # CONFIG_SCSI_QLOGIC_1280_1040 is not set CONFIG_SCSI_QLA2XXX=y @@ -351,6 +448,7 @@ CONFIG_SCSI_QLA22XX=m CONFIG_SCSI_QLA2300=m CONFIG_SCSI_QLA2322=m # CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -397,74 +495,14 @@ CONFIG_FUSION_MAX_SGE=128 # CONFIG_I2O is not set # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -CONFIG_ARPD=y -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - +# Network device support # -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETPOLL=y -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -CONFIG_NET_POLL_CONTROLLER=y -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_NET_SB1000 is not set # # ARCnet devices @@ -472,6 +510,11 @@ CONFIG_DUMMY=m # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y @@ -492,6 +535,7 @@ CONFIG_TULIP=m # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set @@ -523,6 +567,7 @@ CONFIG_E1000=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set @@ -532,6 +577,7 @@ CONFIG_TIGON3=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -556,6 +602,10 @@ CONFIG_TIGON3=y # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_RX is not set +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y # # ISDN subsystem @@ -614,9 +664,7 @@ CONFIG_GAMEPORT=m # CONFIG_GAMEPORT_NS558 is not set # CONFIG_GAMEPORT_L4 is not set # CONFIG_GAMEPORT_EMU10K1 is not set -# CONFIG_GAMEPORT_VORTEX is not set # CONFIG_GAMEPORT_FM801 is not set -# CONFIG_GAMEPORT_CS461X is not set # # Character devices @@ -627,6 +675,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_NONSTANDARD=y # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set @@ -648,7 +697,6 @@ CONFIG_SERIAL_8250_NR_UARTS=6 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # @@ -657,8 +705,8 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_SGI_L1_CONSOLE=y -CONFIG_SERIAL_SGI_IOC4=y # CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_SGI_IOC4=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -691,6 +739,8 @@ CONFIG_DRM_R128=m CONFIG_DRM_RADEON=m CONFIG_DRM_MGA=m CONFIG_DRM_SIS=m +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set CONFIG_RAW_DRIVER=m CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set @@ -715,10 +765,21 @@ CONFIG_MMTIMER=y # CONFIG_W1 is not set # +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# # Misc devices # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -760,6 +821,7 @@ CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_VERBOSE_PRINTK=y # CONFIG_SND_DEBUG is not set +CONFIG_SND_GENERIC_DRIVER=y # # Generic devices @@ -771,11 +833,12 @@ CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m # # PCI devices # -CONFIG_SND_AC97_CODEC=m # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set @@ -797,9 +860,10 @@ CONFIG_SND_EMU10K1=m # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_YMFPCI is not set -# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_AD1889 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set @@ -851,6 +915,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y @@ -860,9 +925,8 @@ CONFIG_USB_UHCI_HCD=m # # USB Device Class drivers # -# CONFIG_USB_AUDIO is not set +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set @@ -895,12 +959,17 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_MOUSE is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set # # USB Imaging devices @@ -925,7 +994,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set -CONFIG_USB_MON=m +CONFIG_USB_MON=y # # USB port drivers @@ -951,10 +1020,11 @@ CONFIG_USB_MON=m # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # -# USB ATM/DSL drivers +# USB DSL modem support # # @@ -971,6 +1041,8 @@ CONFIG_USB_MON=m # InfiniBand support # CONFIG_INFINIBAND=m +# CONFIG_INFINIBAND_USER_MAD is not set +# CONFIG_INFINIBAND_USER_ACCESS is not set CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m @@ -988,6 +1060,7 @@ CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y @@ -1003,22 +1076,20 @@ CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# CONFIG_XFS_FS=y CONFIG_XFS_EXPORT=y -# CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -1047,14 +1118,11 @@ CONFIG_NTFS_FS=m CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -CONFIG_TMPFS_XATTR=y -CONFIG_TMPFS_SECURITY=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -1078,15 +1146,18 @@ CONFIG_RAMFS=y # CONFIG_NFS_FS=m CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=m CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_RPCSEC_GSS_KRB5=m @@ -1101,6 +1172,7 @@ CONFIG_CIFS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -1170,10 +1242,12 @@ CONFIG_NLS_UTF8=m # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y # # HP Simulator drivers @@ -1194,6 +1268,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=20 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1201,6 +1276,7 @@ CONFIG_LOG_BUF_SHIFT=20 # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_KPROBES is not set CONFIG_IA64_GRANULE_16MB=y # CONFIG_IA64_GRANULE_64MB is not set # CONFIG_IA64_PRINT_HAZARDS is not set @@ -1222,7 +1298,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c index 80f8ef0..317c334 100644 --- a/arch/ia64/hp/common/hwsw_iommu.c +++ b/arch/ia64/hp/common/hwsw_iommu.c @@ -17,7 +17,7 @@ #include <asm/machvec.h> /* swiotlb declarations & definitions: */ -extern void swiotlb_init_with_default_size (size_t size); +extern int swiotlb_late_init_with_default_size (size_t size); extern ia64_mv_dma_alloc_coherent swiotlb_alloc_coherent; extern ia64_mv_dma_free_coherent swiotlb_free_coherent; extern ia64_mv_dma_map_single swiotlb_map_single; @@ -67,7 +67,16 @@ void hwsw_init (void) { /* default to a smallish 2MB sw I/O TLB */ - swiotlb_init_with_default_size (2 * (1<<20)); + if (swiotlb_late_init_with_default_size (2 * (1<<20)) != 0) { +#ifdef CONFIG_IA64_GENERIC + /* Better to have normal DMA than panic */ + printk(KERN_WARNING "%s: Failed to initialize software I/O TLB," + " reverting to hpzx1 platform vector\n", __FUNCTION__); + machvec_init("hpzx1"); +#else + panic("Unable to initialize software I/O TLB services"); +#endif + } } void * diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index 1195759..e64ca04 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -2028,9 +2028,40 @@ static struct acpi_driver acpi_sba_ioc_driver = { static int __init sba_init(void) { + if (!ia64_platform_is("hpzx1") && !ia64_platform_is("hpzx1_swiotlb")) + return 0; + acpi_bus_register_driver(&acpi_sba_ioc_driver); - if (!ioc_list) + if (!ioc_list) { +#ifdef CONFIG_IA64_GENERIC + extern int swiotlb_late_init_with_default_size (size_t size); + + /* + * If we didn't find something sba_iommu can claim, we + * need to setup the swiotlb and switch to the dig machvec. + */ + if (swiotlb_late_init_with_default_size(64 * (1<<20)) != 0) + panic("Unable to find SBA IOMMU or initialize " + "software I/O TLB: Try machvec=dig boot option"); + machvec_init("dig"); +#else + panic("Unable to find SBA IOMMU: Try a generic or DIG kernel"); +#endif return 0; + } + +#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_HP_ZX1_SWIOTLB) + /* + * hpzx1_swiotlb needs to have a fairly small swiotlb bounce + * buffer setup to support devices with smaller DMA masks than + * sba_iommu can handle. + */ + if (ia64_platform_is("hpzx1_swiotlb")) { + extern void hwsw_init(void); + + hwsw_init(); + } +#endif #ifdef CONFIG_PCI { @@ -2048,18 +2079,6 @@ sba_init(void) subsys_initcall(sba_init); /* must be initialized after ACPI etc., but before any drivers... */ -extern void dig_setup(char**); -/* - * MAX_DMA_ADDRESS needs to be setup prior to paging_init to do any good, - * so we use the platform_setup hook to fix it up. - */ -void __init -sba_setup(char **cmdline_p) -{ - MAX_DMA_ADDRESS = ~0UL; - dig_setup(cmdline_p); -} - static int __init nosbagart(char *str) { diff --git a/arch/ia64/hp/sim/boot/boot_head.S b/arch/ia64/hp/sim/boot/boot_head.S index 1c8c7e6..a9bd71a 100644 --- a/arch/ia64/hp/sim/boot/boot_head.S +++ b/arch/ia64/hp/sim/boot/boot_head.S @@ -4,6 +4,7 @@ */ #include <asm/asmmacro.h> +#include <asm/pal.h> .bss .align 16 @@ -49,7 +50,11 @@ GLOBAL_ENTRY(jmp_to_kernel) br.sptk.few b7 END(jmp_to_kernel) - +/* + * r28 contains the index of the PAL function + * r29--31 the args + * Return values in ret0--3 (r8--11) + */ GLOBAL_ENTRY(pal_emulator_static) mov r8=-1 mov r9=256 @@ -62,7 +67,7 @@ GLOBAL_ENTRY(pal_emulator_static) cmp.gtu p6,p7=r9,r28 (p6) br.cond.sptk.few stacked ;; -static: cmp.eq p6,p7=6,r28 /* PAL_PTCE_INFO */ +static: cmp.eq p6,p7=PAL_PTCE_INFO,r28 (p7) br.cond.sptk.few 1f ;; mov r8=0 /* status = 0 */ @@ -70,21 +75,21 @@ static: cmp.eq p6,p7=6,r28 /* PAL_PTCE_INFO */ movl r10=0x0000000200000003 /* count[0], count[1] */ movl r11=0x1000000000002000 /* stride[0], stride[1] */ br.cond.sptk.few rp -1: cmp.eq p6,p7=14,r28 /* PAL_FREQ_RATIOS */ +1: cmp.eq p6,p7=PAL_FREQ_RATIOS,r28 (p7) br.cond.sptk.few 1f mov r8=0 /* status = 0 */ movl r9 =0x100000064 /* proc_ratio (1/100) */ movl r10=0x100000100 /* bus_ratio<<32 (1/256) */ movl r11=0x100000064 /* itc_ratio<<32 (1/100) */ ;; -1: cmp.eq p6,p7=19,r28 /* PAL_RSE_INFO */ +1: cmp.eq p6,p7=PAL_RSE_INFO,r28 (p7) br.cond.sptk.few 1f mov r8=0 /* status = 0 */ mov r9=96 /* num phys stacked */ mov r10=0 /* hints */ mov r11=0 br.cond.sptk.few rp -1: cmp.eq p6,p7=1,r28 /* PAL_CACHE_FLUSH */ +1: cmp.eq p6,p7=PAL_CACHE_FLUSH,r28 /* PAL_CACHE_FLUSH */ (p7) br.cond.sptk.few 1f mov r9=ar.lc movl r8=524288 /* flush 512k million cache lines (16MB) */ @@ -102,7 +107,7 @@ static: cmp.eq p6,p7=6,r28 /* PAL_PTCE_INFO */ mov ar.lc=r9 mov r8=r0 ;; -1: cmp.eq p6,p7=15,r28 /* PAL_PERF_MON_INFO */ +1: cmp.eq p6,p7=PAL_PERF_MON_INFO,r28 (p7) br.cond.sptk.few 1f mov r8=0 /* status = 0 */ movl r9 =0x08122f04 /* generic=4 width=47 retired=8 cycles=18 */ @@ -138,6 +143,20 @@ static: cmp.eq p6,p7=6,r28 /* PAL_PTCE_INFO */ st8 [r29]=r0,16 /* clear remaining bits */ st8 [r18]=r0,16 /* clear remaining bits */ ;; +1: cmp.eq p6,p7=PAL_VM_SUMMARY,r28 +(p7) br.cond.sptk.few 1f + mov r8=0 /* status = 0 */ + movl r9=0x2044040020F1865 /* num_tc_levels=2, num_unique_tcs=4 */ + /* max_itr_entry=64, max_dtr_entry=64 */ + /* hash_tag_id=2, max_pkr=15 */ + /* key_size=24, phys_add_size=50, vw=1 */ + movl r10=0x183C /* rid_size=24, impl_va_msb=60 */ + ;; +1: cmp.eq p6,p7=PAL_MEM_ATTRIB,r28 +(p7) br.cond.sptk.few 1f + mov r8=0 /* status = 0 */ + mov r9=0x80|0x01 /* NatPage|WB */ + ;; 1: br.cond.sptk.few rp stacked: br.ret.sptk.few rp diff --git a/arch/ia64/hp/sim/simscsi.c b/arch/ia64/hp/sim/simscsi.c index 56405db..a3fe975 100644 --- a/arch/ia64/hp/sim/simscsi.c +++ b/arch/ia64/hp/sim/simscsi.c @@ -205,10 +205,11 @@ simscsi_get_disk_size (int fd) char buf[512]; /* - * This is a bit kludgey: the simulator doesn't provide a direct way of determining - * the disk size, so we do a binary search, assuming a maximum disk size of 4GB. + * This is a bit kludgey: the simulator doesn't provide a + * direct way of determining the disk size, so we do a binary + * search, assuming a maximum disk size of 128GB. */ - for (bit = (4UL << 30)/512; bit != 0; bit >>= 1) { + for (bit = (128UL << 30)/512; bit != 0; bit >>= 1) { req.addr = __pa(&buf); req.len = sizeof(buf); ia64_ssc(fd, 1, __pa(&req), ((sectors | bit) - 1)*512, SSC_READ); @@ -225,14 +226,33 @@ simscsi_readwrite10 (struct scsi_cmnd *sc, int mode) { unsigned long offset; - offset = ( (sc->cmnd[2] << 24) | (sc->cmnd[3] << 16) - | (sc->cmnd[4] << 8) | (sc->cmnd[5] << 0))*512; + offset = (((unsigned long)sc->cmnd[2] << 24) + | ((unsigned long)sc->cmnd[3] << 16) + | ((unsigned long)sc->cmnd[4] << 8) + | ((unsigned long)sc->cmnd[5] << 0))*512UL; if (sc->use_sg > 0) simscsi_sg_readwrite(sc, mode, offset); else simscsi_readwrite(sc, mode, offset, ((sc->cmnd[7] << 8) | sc->cmnd[8])*512); } +static void simscsi_fillresult(struct scsi_cmnd *sc, char *buf, unsigned len) +{ + + int scatterlen = sc->use_sg; + struct scatterlist *slp; + + if (scatterlen == 0) + memcpy(sc->request_buffer, buf, len); + else for (slp = (struct scatterlist *)sc->buffer; scatterlen-- > 0 && len > 0; slp++) { + unsigned thislen = min(len, slp->length); + + memcpy(page_address(slp->page) + slp->offset, buf, thislen); + slp++; + len -= thislen; + } +} + static int simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) { @@ -240,6 +260,7 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) char fname[MAX_ROOT_LEN+16]; size_t disk_size; char *buf; + char localbuf[36]; #if DEBUG_SIMSCSI register long sp asm ("sp"); @@ -263,7 +284,7 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) /* disk doesn't exist... */ break; } - buf = sc->request_buffer; + buf = localbuf; buf[0] = 0; /* magnetic disk */ buf[1] = 0; /* not a removable medium */ buf[2] = 2; /* SCSI-2 compliant device */ @@ -273,6 +294,7 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) buf[6] = 0; /* reserved */ buf[7] = 0; /* various flags */ memcpy(buf + 8, "HP SIMULATED DISK 0.00", 28); + simscsi_fillresult(sc, buf, 36); sc->result = GOOD; break; @@ -304,16 +326,13 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) simscsi_readwrite10(sc, SSC_WRITE); break; - case READ_CAPACITY: if (desc[target_id] < 0 || sc->request_bufflen < 8) { break; } - buf = sc->request_buffer; - + buf = localbuf; disk_size = simscsi_get_disk_size(desc[target_id]); - /* pretend to be a 1GB disk (partition table contains real stuff): */ buf[0] = (disk_size >> 24) & 0xff; buf[1] = (disk_size >> 16) & 0xff; buf[2] = (disk_size >> 8) & 0xff; @@ -323,13 +342,14 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) buf[5] = 0; buf[6] = 2; buf[7] = 0; + simscsi_fillresult(sc, buf, 8); sc->result = GOOD; break; case MODE_SENSE: case MODE_SENSE_10: /* sd.c uses this to determine whether disk does write-caching. */ - memset(sc->request_buffer, 0, 128); + simscsi_fillresult(sc, (char *)empty_zero_page, sc->request_bufflen); sc->result = GOOD; break; diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c index 7dcb858..b42ec37 100644 --- a/arch/ia64/hp/sim/simserial.c +++ b/arch/ia64/hp/sim/simserial.c @@ -130,7 +130,7 @@ static void rs_stop(struct tty_struct *tty) static void rs_start(struct tty_struct *tty) { -#if SIMSERIAL_DEBUG +#ifdef SIMSERIAL_DEBUG printk("rs_start: tty->stopped=%d tty->hw_stopped=%d tty->flow_stopped=%d\n", tty->stopped, tty->hw_stopped, tty->flow_stopped); #endif diff --git a/arch/ia64/ia32/binfmt_elf32.c b/arch/ia64/ia32/binfmt_elf32.c index 31de70b..a7280d9 100644 --- a/arch/ia64/ia32/binfmt_elf32.c +++ b/arch/ia64/ia32/binfmt_elf32.c @@ -216,12 +216,6 @@ ia32_setup_arg_pages (struct linux_binprm *bprm, int executable_stack) if (!mpnt) return -ENOMEM; - if (security_vm_enough_memory((IA32_STACK_TOP - (PAGE_MASK & (unsigned long) bprm->p)) - >> PAGE_SHIFT)) { - kmem_cache_free(vm_area_cachep, mpnt); - return -ENOMEM; - } - memset(mpnt, 0, sizeof(*mpnt)); down_write(¤t->mm->mmap_sem); diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S index 829a6d8..494fad6 100644 --- a/arch/ia64/ia32/ia32_entry.S +++ b/arch/ia64/ia32/ia32_entry.S @@ -1,6 +1,6 @@ #include <asm/asmmacro.h> #include <asm/ia32.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/signal.h> #include <asm/thread_info.h> @@ -215,7 +215,7 @@ ia32_syscall_table: data8 sys32_fork data8 sys_read data8 sys_write - data8 sys32_open /* 5 */ + data8 compat_sys_open /* 5 */ data8 sys_close data8 sys32_waitpid data8 sys_creat diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c index c1e20d6..3fa67ec 100644 --- a/arch/ia64/ia32/sys_ia32.c +++ b/arch/ia64/ia32/sys_ia32.c @@ -2327,7 +2327,7 @@ sys32_sendfile (int out_fd, int in_fd, int __user *offset, unsigned int count) ret = sys_sendfile(out_fd, in_fd, offset ? (off_t __user *) &of : NULL, count); set_fs(old_fs); - if (!ret && offset && put_user(of, offset)) + if (offset && put_user(of, offset)) return -EFAULT; return ret; @@ -2359,37 +2359,6 @@ sys32_brk (unsigned int brk) return ret; } -/* - * Exactly like fs/open.c:sys_open(), except that it doesn't set the O_LARGEFILE flag. - */ -asmlinkage long -sys32_open (const char __user * filename, int flags, int mode) -{ - char * tmp; - int fd, error; - - tmp = getname(filename); - fd = PTR_ERR(tmp); - if (!IS_ERR(tmp)) { - fd = get_unused_fd(); - if (fd >= 0) { - struct file *f = filp_open(tmp, flags, mode); - error = PTR_ERR(f); - if (IS_ERR(f)) - goto out_error; - fd_install(fd, f); - } -out: - putname(tmp); - } - return fd; - -out_error: - put_unused_fd(fd); - fd = error; - goto out; -} - /* Structure for ia32 emulation on ia64 */ struct epoll_event32 { diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile index b242594..307514f 100644 --- a/arch/ia64/kernel/Makefile +++ b/arch/ia64/kernel/Makefile @@ -16,7 +16,7 @@ obj-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += acpi-ext.o obj-$(CONFIG_IA64_PALINFO) += palinfo.o obj-$(CONFIG_IOSAPIC) += iosapic.o obj-$(CONFIG_MODULES) += module.o -obj-$(CONFIG_SMP) += smp.o smpboot.o domain.o +obj-$(CONFIG_SMP) += smp.o smpboot.o obj-$(CONFIG_NUMA) += numa.o obj-$(CONFIG_PERFMON) += perfmon_default_smpl.o obj-$(CONFIG_IA64_CYCLONE) += cyclone.o diff --git a/arch/ia64/kernel/acpi-ext.c b/arch/ia64/kernel/acpi-ext.c index 2623df5..13a5b3b 100644 --- a/arch/ia64/kernel/acpi-ext.c +++ b/arch/ia64/kernel/acpi-ext.c @@ -17,20 +17,20 @@ #include <asm/acpi-ext.h> struct acpi_vendor_descriptor { - u8 guid_id; - efi_guid_t guid; + u8 guid_id; + efi_guid_t guid; }; struct acpi_vendor_info { - struct acpi_vendor_descriptor *descriptor; - u8 *data; - u32 length; + struct acpi_vendor_descriptor *descriptor; + u8 *data; + u32 length; }; acpi_status acpi_vendor_resource_match(struct acpi_resource *resource, void *context) { - struct acpi_vendor_info *info = (struct acpi_vendor_info *) context; + struct acpi_vendor_info *info = (struct acpi_vendor_info *)context; struct acpi_resource_vendor *vendor; struct acpi_vendor_descriptor *descriptor; u32 length; @@ -38,8 +38,8 @@ acpi_vendor_resource_match(struct acpi_resource *resource, void *context) if (resource->id != ACPI_RSTYPE_VENDOR) return AE_OK; - vendor = (struct acpi_resource_vendor *) &resource->data; - descriptor = (struct acpi_vendor_descriptor *) vendor->reserved; + vendor = (struct acpi_resource_vendor *)&resource->data; + descriptor = (struct acpi_vendor_descriptor *)vendor->reserved; if (vendor->length <= sizeof(*info->descriptor) || descriptor->guid_id != info->descriptor->guid_id || efi_guidcmp(descriptor->guid, info->descriptor->guid)) @@ -50,21 +50,24 @@ acpi_vendor_resource_match(struct acpi_resource *resource, void *context) if (!info->data) return AE_NO_MEMORY; - memcpy(info->data, vendor->reserved + sizeof(struct acpi_vendor_descriptor), length); + memcpy(info->data, + vendor->reserved + sizeof(struct acpi_vendor_descriptor), + length); info->length = length; return AE_CTRL_TERMINATE; } acpi_status -acpi_find_vendor_resource(acpi_handle obj, struct acpi_vendor_descriptor *id, - u8 **data, u32 *length) +acpi_find_vendor_resource(acpi_handle obj, struct acpi_vendor_descriptor * id, + u8 ** data, u32 * length) { struct acpi_vendor_info info; info.descriptor = id; info.data = NULL; - acpi_walk_resources(obj, METHOD_NAME__CRS, acpi_vendor_resource_match, &info); + acpi_walk_resources(obj, METHOD_NAME__CRS, acpi_vendor_resource_match, + &info); if (!info.data) return AE_NOT_FOUND; @@ -75,17 +78,19 @@ acpi_find_vendor_resource(acpi_handle obj, struct acpi_vendor_descriptor *id, struct acpi_vendor_descriptor hp_ccsr_descriptor = { .guid_id = 2, - .guid = EFI_GUID(0x69e9adf9, 0x924f, 0xab5f, 0xf6, 0x4a, 0x24, 0xd2, 0x01, 0x37, 0x0e, 0xad) + .guid = + EFI_GUID(0x69e9adf9, 0x924f, 0xab5f, 0xf6, 0x4a, 0x24, 0xd2, 0x01, + 0x37, 0x0e, 0xad) }; -acpi_status -hp_acpi_csr_space(acpi_handle obj, u64 *csr_base, u64 *csr_length) +acpi_status hp_acpi_csr_space(acpi_handle obj, u64 * csr_base, u64 * csr_length) { acpi_status status; u8 *data; u32 length; - status = acpi_find_vendor_resource(obj, &hp_ccsr_descriptor, &data, &length); + status = + acpi_find_vendor_resource(obj, &hp_ccsr_descriptor, &data, &length); if (ACPI_FAILURE(status) || length != 16) return AE_NOT_FOUND; diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 9609f24..9ad94dd 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -74,12 +74,11 @@ unsigned int acpi_cpei_override; unsigned int acpi_cpei_phys_cpuid; #define MAX_SAPICS 256 -u16 ia64_acpiid_to_sapicid[MAX_SAPICS] = - { [0 ... MAX_SAPICS - 1] = -1 }; +u16 ia64_acpiid_to_sapicid[MAX_SAPICS] = {[0 ... MAX_SAPICS - 1] = -1 }; + EXPORT_SYMBOL(ia64_acpiid_to_sapicid); -const char * -acpi_get_sysname (void) +const char *acpi_get_sysname(void) { #ifdef CONFIG_IA64_GENERIC unsigned long rsdp_phys; @@ -89,27 +88,29 @@ acpi_get_sysname (void) rsdp_phys = acpi_find_rsdp(); if (!rsdp_phys) { - printk(KERN_ERR "ACPI 2.0 RSDP not found, default to \"dig\"\n"); + printk(KERN_ERR + "ACPI 2.0 RSDP not found, default to \"dig\"\n"); return "dig"; } - rsdp = (struct acpi20_table_rsdp *) __va(rsdp_phys); + rsdp = (struct acpi20_table_rsdp *)__va(rsdp_phys); if (strncmp(rsdp->signature, RSDP_SIG, sizeof(RSDP_SIG) - 1)) { - printk(KERN_ERR "ACPI 2.0 RSDP signature incorrect, default to \"dig\"\n"); + printk(KERN_ERR + "ACPI 2.0 RSDP signature incorrect, default to \"dig\"\n"); return "dig"; } - xsdt = (struct acpi_table_xsdt *) __va(rsdp->xsdt_address); + xsdt = (struct acpi_table_xsdt *)__va(rsdp->xsdt_address); hdr = &xsdt->header; if (strncmp(hdr->signature, XSDT_SIG, sizeof(XSDT_SIG) - 1)) { - printk(KERN_ERR "ACPI 2.0 XSDT signature incorrect, default to \"dig\"\n"); + printk(KERN_ERR + "ACPI 2.0 XSDT signature incorrect, default to \"dig\"\n"); return "dig"; } if (!strcmp(hdr->oem_id, "HP")) { return "hpzx1"; - } - else if (!strcmp(hdr->oem_id, "SGI")) { + } else if (!strcmp(hdr->oem_id, "SGI")) { return "sn2"; } @@ -131,7 +132,7 @@ acpi_get_sysname (void) #endif } -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI #define ACPI_MAX_PLATFORM_INTERRUPTS 256 @@ -146,8 +147,7 @@ enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_IOSAPIC; * Interrupt routing API for device drivers. Provides interrupt vector for * a generic platform event. Currently only CPEI is implemented. */ -int -acpi_request_vector (u32 int_type) +int acpi_request_vector(u32 int_type) { int vector = -1; @@ -155,12 +155,12 @@ acpi_request_vector (u32 int_type) /* corrected platform error interrupt */ vector = platform_intr_list[int_type]; } else - printk(KERN_ERR "acpi_request_vector(): invalid interrupt type\n"); + printk(KERN_ERR + "acpi_request_vector(): invalid interrupt type\n"); return vector; } -char * -__acpi_map_table (unsigned long phys_addr, unsigned long size) +char *__acpi_map_table(unsigned long phys_addr, unsigned long size) { return __va(phys_addr); } @@ -169,19 +169,18 @@ __acpi_map_table (unsigned long phys_addr, unsigned long size) Boot-time Table Parsing -------------------------------------------------------------------------- */ -static int total_cpus __initdata; -static int available_cpus __initdata; -struct acpi_table_madt * acpi_madt __initdata; -static u8 has_8259; - +static int total_cpus __initdata; +static int available_cpus __initdata; +struct acpi_table_madt *acpi_madt __initdata; +static u8 has_8259; static int __init -acpi_parse_lapic_addr_ovr ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_lapic_addr_ovr(acpi_table_entry_header * header, + const unsigned long end) { struct acpi_table_lapic_addr_ovr *lapic; - lapic = (struct acpi_table_lapic_addr_ovr *) header; + lapic = (struct acpi_table_lapic_addr_ovr *)header; if (BAD_MADT_ENTRY(lapic, end)) return -EINVAL; @@ -193,22 +192,23 @@ acpi_parse_lapic_addr_ovr ( return 0; } - static int __init -acpi_parse_lsapic (acpi_table_entry_header *header, const unsigned long end) +acpi_parse_lsapic(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_lsapic *lsapic; - lsapic = (struct acpi_table_lsapic *) header; + lsapic = (struct acpi_table_lsapic *)header; if (BAD_MADT_ENTRY(lsapic, end)) return -EINVAL; if (lsapic->flags.enabled) { #ifdef CONFIG_SMP - smp_boot_data.cpu_phys_id[available_cpus] = (lsapic->id << 8) | lsapic->eid; + smp_boot_data.cpu_phys_id[available_cpus] = + (lsapic->id << 8) | lsapic->eid; #endif - ia64_acpiid_to_sapicid[lsapic->acpi_id] = (lsapic->id << 8) | lsapic->eid; + ia64_acpiid_to_sapicid[lsapic->acpi_id] = + (lsapic->id << 8) | lsapic->eid; ++available_cpus; } @@ -216,13 +216,12 @@ acpi_parse_lsapic (acpi_table_entry_header *header, const unsigned long end) return 0; } - static int __init -acpi_parse_lapic_nmi (acpi_table_entry_header *header, const unsigned long end) +acpi_parse_lapic_nmi(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_lapic_nmi *lacpi_nmi; - lacpi_nmi = (struct acpi_table_lapic_nmi*) header; + lacpi_nmi = (struct acpi_table_lapic_nmi *)header; if (BAD_MADT_ENTRY(lacpi_nmi, end)) return -EINVAL; @@ -231,13 +230,12 @@ acpi_parse_lapic_nmi (acpi_table_entry_header *header, const unsigned long end) return 0; } - static int __init -acpi_parse_iosapic (acpi_table_entry_header *header, const unsigned long end) +acpi_parse_iosapic(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_iosapic *iosapic; - iosapic = (struct acpi_table_iosapic *) header; + iosapic = (struct acpi_table_iosapic *)header; if (BAD_MADT_ENTRY(iosapic, end)) return -EINVAL; @@ -245,15 +243,14 @@ acpi_parse_iosapic (acpi_table_entry_header *header, const unsigned long end) return iosapic_init(iosapic->address, iosapic->global_irq_base); } - static int __init -acpi_parse_plat_int_src ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_plat_int_src(acpi_table_entry_header * header, + const unsigned long end) { struct acpi_table_plat_int_src *plintsrc; int vector; - plintsrc = (struct acpi_table_plat_int_src *) header; + plintsrc = (struct acpi_table_plat_int_src *)header; if (BAD_MADT_ENTRY(plintsrc, end)) return -EINVAL; @@ -267,8 +264,12 @@ acpi_parse_plat_int_src ( plintsrc->iosapic_vector, plintsrc->eid, plintsrc->id, - (plintsrc->flags.polarity == 1) ? IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW, - (plintsrc->flags.trigger == 1) ? IOSAPIC_EDGE : IOSAPIC_LEVEL); + (plintsrc->flags.polarity == + 1) ? IOSAPIC_POL_HIGH : + IOSAPIC_POL_LOW, + (plintsrc->flags.trigger == + 1) ? IOSAPIC_EDGE : + IOSAPIC_LEVEL); platform_intr_list[plintsrc->type] = vector; if (acpi_madt_rev > 1) { @@ -283,7 +284,6 @@ acpi_parse_plat_int_src ( return 0; } - unsigned int can_cpei_retarget(void) { extern int cpe_vector; @@ -322,29 +322,30 @@ unsigned int get_cpei_target_cpu(void) } static int __init -acpi_parse_int_src_ovr ( - acpi_table_entry_header *header, const unsigned long end) +acpi_parse_int_src_ovr(acpi_table_entry_header * header, + const unsigned long end) { struct acpi_table_int_src_ovr *p; - p = (struct acpi_table_int_src_ovr *) header; + p = (struct acpi_table_int_src_ovr *)header; if (BAD_MADT_ENTRY(p, end)) return -EINVAL; iosapic_override_isa_irq(p->bus_irq, p->global_irq, - (p->flags.polarity == 1) ? IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW, - (p->flags.trigger == 1) ? IOSAPIC_EDGE : IOSAPIC_LEVEL); + (p->flags.polarity == + 1) ? IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW, + (p->flags.trigger == + 1) ? IOSAPIC_EDGE : IOSAPIC_LEVEL); return 0; } - static int __init -acpi_parse_nmi_src (acpi_table_entry_header *header, const unsigned long end) +acpi_parse_nmi_src(acpi_table_entry_header * header, const unsigned long end) { struct acpi_table_nmi_src *nmi_src; - nmi_src = (struct acpi_table_nmi_src*) header; + nmi_src = (struct acpi_table_nmi_src *)header; if (BAD_MADT_ENTRY(nmi_src, end)) return -EINVAL; @@ -353,11 +354,9 @@ acpi_parse_nmi_src (acpi_table_entry_header *header, const unsigned long end) return 0; } -static void __init -acpi_madt_oem_check (char *oem_id, char *oem_table_id) +static void __init acpi_madt_oem_check(char *oem_id, char *oem_table_id) { - if (!strncmp(oem_id, "IBM", 3) && - (!strncmp(oem_table_id, "SERMOW", 6))) { + if (!strncmp(oem_id, "IBM", 3) && (!strncmp(oem_table_id, "SERMOW", 6))) { /* * Unfortunately ITC_DRIFT is not yet part of the @@ -370,19 +369,18 @@ acpi_madt_oem_check (char *oem_id, char *oem_table_id) } } -static int __init -acpi_parse_madt (unsigned long phys_addr, unsigned long size) +static int __init acpi_parse_madt(unsigned long phys_addr, unsigned long size) { if (!phys_addr || !size) return -EINVAL; - acpi_madt = (struct acpi_table_madt *) __va(phys_addr); + acpi_madt = (struct acpi_table_madt *)__va(phys_addr); acpi_madt_rev = acpi_madt->header.revision; /* remember the value for reference after free_initmem() */ #ifdef CONFIG_ITANIUM - has_8259 = 1; /* Firmware on old Itanium systems is broken */ + has_8259 = 1; /* Firmware on old Itanium systems is broken */ #else has_8259 = acpi_madt->flags.pcat_compat; #endif @@ -396,19 +394,18 @@ acpi_parse_madt (unsigned long phys_addr, unsigned long size) printk(KERN_INFO PREFIX "Local APIC address %p\n", ipi_base_addr); acpi_madt_oem_check(acpi_madt->header.oem_id, - acpi_madt->header.oem_table_id); + acpi_madt->header.oem_table_id); return 0; } - #ifdef CONFIG_ACPI_NUMA #undef SLIT_DEBUG #define PXM_FLAG_LEN ((MAX_PXM_DOMAINS + 1)/32) -static int __initdata srat_num_cpus; /* number of cpus */ +static int __initdata srat_num_cpus; /* number of cpus */ static u32 __devinitdata pxm_flag[PXM_FLAG_LEN]; #define pxm_bit_set(bit) (set_bit(bit,(void *)pxm_flag)) #define pxm_bit_test(bit) (test_bit(bit,(void *)pxm_flag)) @@ -421,15 +418,15 @@ static struct acpi_table_slit __initdata *slit_table; * ACPI 2.0 SLIT (System Locality Information Table) * http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf */ -void __init -acpi_numa_slit_init (struct acpi_table_slit *slit) +void __init acpi_numa_slit_init(struct acpi_table_slit *slit) { u32 len; len = sizeof(struct acpi_table_header) + 8 - + slit->localities * slit->localities; + + slit->localities * slit->localities; if (slit->header.length != len) { - printk(KERN_ERR "ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n", + printk(KERN_ERR + "ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n", len, slit->header.length); memset(numa_slit, 10, sizeof(numa_slit)); return; @@ -438,19 +435,20 @@ acpi_numa_slit_init (struct acpi_table_slit *slit) } void __init -acpi_numa_processor_affinity_init (struct acpi_table_processor_affinity *pa) +acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa) { /* record this node in proximity bitmap */ pxm_bit_set(pa->proximity_domain); - node_cpuid[srat_num_cpus].phys_id = (pa->apic_id << 8) | (pa->lsapic_eid); + node_cpuid[srat_num_cpus].phys_id = + (pa->apic_id << 8) | (pa->lsapic_eid); /* nid should be overridden as logical node id later */ node_cpuid[srat_num_cpus].nid = pa->proximity_domain; srat_num_cpus++; } void __init -acpi_numa_memory_affinity_init (struct acpi_table_memory_affinity *ma) +acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma) { unsigned long paddr, size; u8 pxm; @@ -487,8 +485,7 @@ acpi_numa_memory_affinity_init (struct acpi_table_memory_affinity *ma) num_node_memblks++; } -void __init -acpi_numa_arch_fixup (void) +void __init acpi_numa_arch_fixup(void) { int i, j, node_from, node_to; @@ -534,21 +531,24 @@ acpi_numa_arch_fixup (void) for (i = 0; i < srat_num_cpus; i++) node_cpuid[i].nid = pxm_to_nid_map[node_cpuid[i].nid]; - printk(KERN_INFO "Number of logical nodes in system = %d\n", num_online_nodes()); - printk(KERN_INFO "Number of memory chunks in system = %d\n", num_node_memblks); + printk(KERN_INFO "Number of logical nodes in system = %d\n", + num_online_nodes()); + printk(KERN_INFO "Number of memory chunks in system = %d\n", + num_node_memblks); - if (!slit_table) return; + if (!slit_table) + return; memset(numa_slit, -1, sizeof(numa_slit)); - for (i=0; i<slit_table->localities; i++) { + for (i = 0; i < slit_table->localities; i++) { if (!pxm_bit_test(i)) continue; node_from = pxm_to_nid_map[i]; - for (j=0; j<slit_table->localities; j++) { + for (j = 0; j < slit_table->localities; j++) { if (!pxm_bit_test(j)) continue; node_to = pxm_to_nid_map[j]; node_distance(node_from, node_to) = - slit_table->entry[i*slit_table->localities + j]; + slit_table->entry[i * slit_table->localities + j]; } } @@ -556,36 +556,41 @@ acpi_numa_arch_fixup (void) printk("ACPI 2.0 SLIT locality table:\n"); for_each_online_node(i) { for_each_online_node(j) - printk("%03d ", node_distance(i,j)); + printk("%03d ", node_distance(i, j)); printk("\n"); } #endif } -#endif /* CONFIG_ACPI_NUMA */ +#endif /* CONFIG_ACPI_NUMA */ -unsigned int -acpi_register_gsi (u32 gsi, int edge_level, int active_high_low) +/* + * success: return IRQ number (>=0) + * failure: return < 0 + */ +int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low) { if (has_8259 && gsi < 16) return isa_irq_to_vector(gsi); return iosapic_register_intr(gsi, - (active_high_low == ACPI_ACTIVE_HIGH) ? IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW, - (edge_level == ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE : IOSAPIC_LEVEL); + (active_high_low == + ACPI_ACTIVE_HIGH) ? IOSAPIC_POL_HIGH : + IOSAPIC_POL_LOW, + (edge_level == + ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE : + IOSAPIC_LEVEL); } + EXPORT_SYMBOL(acpi_register_gsi); -#ifdef CONFIG_ACPI_DEALLOCATE_IRQ -void -acpi_unregister_gsi (u32 gsi) +void acpi_unregister_gsi(u32 gsi) { iosapic_unregister_intr(gsi); } + EXPORT_SYMBOL(acpi_unregister_gsi); -#endif /* CONFIG_ACPI_DEALLOCATE_IRQ */ -static int __init -acpi_parse_fadt (unsigned long phys_addr, unsigned long size) +static int __init acpi_parse_fadt(unsigned long phys_addr, unsigned long size) { struct acpi_table_header *fadt_header; struct fadt_descriptor_rev2 *fadt; @@ -593,11 +598,11 @@ acpi_parse_fadt (unsigned long phys_addr, unsigned long size) if (!phys_addr || !size) return -EINVAL; - fadt_header = (struct acpi_table_header *) __va(phys_addr); + fadt_header = (struct acpi_table_header *)__va(phys_addr); if (fadt_header->revision != 3) - return -ENODEV; /* Only deal with ACPI 2.0 FADT */ + return -ENODEV; /* Only deal with ACPI 2.0 FADT */ - fadt = (struct fadt_descriptor_rev2 *) fadt_header; + fadt = (struct fadt_descriptor_rev2 *)fadt_header; if (!(fadt->iapc_boot_arch & BAF_8042_KEYBOARD_CONTROLLER)) acpi_kbd_controller_present = 0; @@ -609,22 +614,19 @@ acpi_parse_fadt (unsigned long phys_addr, unsigned long size) return 0; } - -unsigned long __init -acpi_find_rsdp (void) +unsigned long __init acpi_find_rsdp(void) { unsigned long rsdp_phys = 0; if (efi.acpi20) rsdp_phys = __pa(efi.acpi20); else if (efi.acpi) - printk(KERN_WARNING PREFIX "v1.0/r0.71 tables no longer supported\n"); + printk(KERN_WARNING PREFIX + "v1.0/r0.71 tables no longer supported\n"); return rsdp_phys; } - -int __init -acpi_boot_init (void) +int __init acpi_boot_init(void) { /* @@ -642,31 +644,43 @@ acpi_boot_init (void) /* Local APIC */ - if (acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr, 0) < 0) - printk(KERN_ERR PREFIX "Error parsing LAPIC address override entry\n"); + if (acpi_table_parse_madt + (ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr, 0) < 0) + printk(KERN_ERR PREFIX + "Error parsing LAPIC address override entry\n"); - if (acpi_table_parse_madt(ACPI_MADT_LSAPIC, acpi_parse_lsapic, NR_CPUS) < 1) - printk(KERN_ERR PREFIX "Error parsing MADT - no LAPIC entries\n"); + if (acpi_table_parse_madt(ACPI_MADT_LSAPIC, acpi_parse_lsapic, NR_CPUS) + < 1) + printk(KERN_ERR PREFIX + "Error parsing MADT - no LAPIC entries\n"); - if (acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0) < 0) + if (acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0) + < 0) printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n"); /* I/O APIC */ - if (acpi_table_parse_madt(ACPI_MADT_IOSAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1) - printk(KERN_ERR PREFIX "Error parsing MADT - no IOSAPIC entries\n"); + if (acpi_table_parse_madt + (ACPI_MADT_IOSAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1) + printk(KERN_ERR PREFIX + "Error parsing MADT - no IOSAPIC entries\n"); /* System-Level Interrupt Routing */ - if (acpi_table_parse_madt(ACPI_MADT_PLAT_INT_SRC, acpi_parse_plat_int_src, ACPI_MAX_PLATFORM_INTERRUPTS) < 0) - printk(KERN_ERR PREFIX "Error parsing platform interrupt source entry\n"); + if (acpi_table_parse_madt + (ACPI_MADT_PLAT_INT_SRC, acpi_parse_plat_int_src, + ACPI_MAX_PLATFORM_INTERRUPTS) < 0) + printk(KERN_ERR PREFIX + "Error parsing platform interrupt source entry\n"); - if (acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, 0) < 0) - printk(KERN_ERR PREFIX "Error parsing interrupt source overrides entry\n"); + if (acpi_table_parse_madt + (ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, 0) < 0) + printk(KERN_ERR PREFIX + "Error parsing interrupt source overrides entry\n"); if (acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, 0) < 0) printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n"); - skip_madt: + skip_madt: /* * FADT says whether a legacy keyboard controller is present. @@ -681,8 +695,9 @@ acpi_boot_init (void) if (available_cpus == 0) { printk(KERN_INFO "ACPI: Found 0 CPUS; assuming 1\n"); printk(KERN_INFO "CPU 0 (0x%04x)", hard_smp_processor_id()); - smp_boot_data.cpu_phys_id[available_cpus] = hard_smp_processor_id(); - available_cpus = 1; /* We've got at least one of these, no? */ + smp_boot_data.cpu_phys_id[available_cpus] = + hard_smp_processor_id(); + available_cpus = 1; /* We've got at least one of these, no? */ } smp_boot_data.cpu_count = available_cpus; @@ -691,8 +706,10 @@ acpi_boot_init (void) if (srat_num_cpus == 0) { int cpu, i = 1; for (cpu = 0; cpu < smp_boot_data.cpu_count; cpu++) - if (smp_boot_data.cpu_phys_id[cpu] != hard_smp_processor_id()) - node_cpuid[i++].phys_id = smp_boot_data.cpu_phys_id[cpu]; + if (smp_boot_data.cpu_phys_id[cpu] != + hard_smp_processor_id()) + node_cpuid[i++].phys_id = + smp_boot_data.cpu_phys_id[cpu]; } # endif #endif @@ -700,12 +717,12 @@ acpi_boot_init (void) build_cpu_to_node_map(); #endif /* Make boot-up look pretty */ - printk(KERN_INFO "%d CPUs available, %d CPUs total\n", available_cpus, total_cpus); + printk(KERN_INFO "%d CPUs available, %d CPUs total\n", available_cpus, + total_cpus); return 0; } -int -acpi_gsi_to_irq (u32 gsi, unsigned int *irq) +int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) { int vector; @@ -726,11 +743,10 @@ acpi_gsi_to_irq (u32 gsi, unsigned int *irq) */ #ifdef CONFIG_ACPI_HOTPLUG_CPU static -int -acpi_map_cpu2node(acpi_handle handle, int cpu, long physid) +int acpi_map_cpu2node(acpi_handle handle, int cpu, long physid) { #ifdef CONFIG_ACPI_NUMA - int pxm_id; + int pxm_id; pxm_id = acpi_get_pxm(handle); @@ -738,31 +754,28 @@ acpi_map_cpu2node(acpi_handle handle, int cpu, long physid) * Assuming that the container driver would have set the proximity * domain and would have initialized pxm_to_nid_map[pxm_id] && pxm_flag */ - node_cpuid[cpu].nid = (pxm_id < 0) ? 0: - pxm_to_nid_map[pxm_id]; + node_cpuid[cpu].nid = (pxm_id < 0) ? 0 : pxm_to_nid_map[pxm_id]; - node_cpuid[cpu].phys_id = physid; + node_cpuid[cpu].phys_id = physid; #endif - return(0); + return (0); } - -int -acpi_map_lsapic(acpi_handle handle, int *pcpu) +int acpi_map_lsapic(acpi_handle handle, int *pcpu) { - struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *obj; struct acpi_table_lsapic *lsapic; cpumask_t tmp_map; long physid; int cpu; - + if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer))) return -EINVAL; - if (!buffer.length || !buffer.pointer) + if (!buffer.length || !buffer.pointer) return -EINVAL; - + obj = buffer.pointer; if (obj->type != ACPI_TYPE_BUFFER || obj->buffer.length < sizeof(*lsapic)) { @@ -778,7 +791,7 @@ acpi_map_lsapic(acpi_handle handle, int *pcpu) return -EINVAL; } - physid = ((lsapic->id <<8) | (lsapic->eid)); + physid = ((lsapic->id << 8) | (lsapic->eid)); acpi_os_free(buffer.pointer); buffer.length = ACPI_ALLOCATE_BUFFER; @@ -786,50 +799,49 @@ acpi_map_lsapic(acpi_handle handle, int *pcpu) cpus_complement(tmp_map, cpu_present_map); cpu = first_cpu(tmp_map); - if(cpu >= NR_CPUS) + if (cpu >= NR_CPUS) return -EINVAL; acpi_map_cpu2node(handle, cpu, physid); - cpu_set(cpu, cpu_present_map); + cpu_set(cpu, cpu_present_map); ia64_cpu_to_sapicid[cpu] = physid; ia64_acpiid_to_sapicid[lsapic->acpi_id] = ia64_cpu_to_sapicid[cpu]; *pcpu = cpu; - return(0); + return (0); } -EXPORT_SYMBOL(acpi_map_lsapic); +EXPORT_SYMBOL(acpi_map_lsapic); -int -acpi_unmap_lsapic(int cpu) +int acpi_unmap_lsapic(int cpu) { int i; - for (i=0; i<MAX_SAPICS; i++) { - if (ia64_acpiid_to_sapicid[i] == ia64_cpu_to_sapicid[cpu]) { - ia64_acpiid_to_sapicid[i] = -1; - break; - } - } + for (i = 0; i < MAX_SAPICS; i++) { + if (ia64_acpiid_to_sapicid[i] == ia64_cpu_to_sapicid[cpu]) { + ia64_acpiid_to_sapicid[i] = -1; + break; + } + } ia64_cpu_to_sapicid[cpu] = -1; - cpu_clear(cpu,cpu_present_map); + cpu_clear(cpu, cpu_present_map); #ifdef CONFIG_ACPI_NUMA /* NUMA specific cleanup's */ #endif - return(0); + return (0); } + EXPORT_SYMBOL(acpi_unmap_lsapic); -#endif /* CONFIG_ACPI_HOTPLUG_CPU */ - +#endif /* CONFIG_ACPI_HOTPLUG_CPU */ #ifdef CONFIG_ACPI_NUMA -acpi_status __devinit -acpi_map_iosapic (acpi_handle handle, u32 depth, void *context, void **ret) +static acpi_status __devinit +acpi_map_iosapic(acpi_handle handle, u32 depth, void *context, void **ret) { - struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *obj; struct acpi_table_iosapic *iosapic; unsigned int gsi_base; @@ -878,29 +890,38 @@ acpi_map_iosapic (acpi_handle handle, u32 depth, void *context, void **ret) map_iosapic_to_node(gsi_base, node); return AE_OK; } -#endif /* CONFIG_NUMA */ -int -acpi_register_ioapic (acpi_handle handle, u64 phys_addr, u32 gsi_base) +static int __init +acpi_map_iosapics (void) +{ + acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL); + return 0; +} + +fs_initcall(acpi_map_iosapics); +#endif /* CONFIG_ACPI_NUMA */ + +int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base) { int err; if ((err = iosapic_init(phys_addr, gsi_base))) return err; -#if CONFIG_ACPI_NUMA +#ifdef CONFIG_ACPI_NUMA acpi_map_iosapic(handle, 0, NULL, NULL); -#endif /* CONFIG_ACPI_NUMA */ +#endif /* CONFIG_ACPI_NUMA */ return 0; } + EXPORT_SYMBOL(acpi_register_ioapic); -int -acpi_unregister_ioapic (acpi_handle handle, u32 gsi_base) +int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base) { return iosapic_remove(gsi_base); } + EXPORT_SYMBOL(acpi_unregister_ioapic); -#endif /* CONFIG_ACPI_BOOT */ +#endif /* CONFIG_ACPI */ diff --git a/arch/ia64/kernel/asm-offsets.c b/arch/ia64/kernel/asm-offsets.c index 7d1ae29..7722565 100644 --- a/arch/ia64/kernel/asm-offsets.c +++ b/arch/ia64/kernel/asm-offsets.c @@ -4,6 +4,7 @@ * to extract and format the required data. */ +#define ASM_OFFSETS_C 1 #include <linux/config.h> #include <linux/sched.h> @@ -211,17 +212,41 @@ void foo(void) #endif BLANK(); - DEFINE(IA64_MCA_CPU_PROC_STATE_DUMP_OFFSET, - offsetof (struct ia64_mca_cpu, proc_state_dump)); - DEFINE(IA64_MCA_CPU_STACK_OFFSET, - offsetof (struct ia64_mca_cpu, stack)); - DEFINE(IA64_MCA_CPU_STACKFRAME_OFFSET, - offsetof (struct ia64_mca_cpu, stackframe)); - DEFINE(IA64_MCA_CPU_RBSTORE_OFFSET, - offsetof (struct ia64_mca_cpu, rbstore)); + DEFINE(IA64_MCA_CPU_MCA_STACK_OFFSET, + offsetof (struct ia64_mca_cpu, mca_stack)); DEFINE(IA64_MCA_CPU_INIT_STACK_OFFSET, offsetof (struct ia64_mca_cpu, init_stack)); BLANK(); + DEFINE(IA64_SAL_OS_STATE_COMMON_OFFSET, + offsetof (struct ia64_sal_os_state, sal_ra)); + DEFINE(IA64_SAL_OS_STATE_OS_GP_OFFSET, + offsetof (struct ia64_sal_os_state, os_gp)); + DEFINE(IA64_SAL_OS_STATE_PAL_MIN_STATE_OFFSET, + offsetof (struct ia64_sal_os_state, pal_min_state)); + DEFINE(IA64_SAL_OS_STATE_PROC_STATE_PARAM_OFFSET, + offsetof (struct ia64_sal_os_state, proc_state_param)); + DEFINE(IA64_SAL_OS_STATE_SIZE, + sizeof (struct ia64_sal_os_state)); + DEFINE(IA64_PMSA_GR_OFFSET, + offsetof (struct pal_min_state_area_s, pmsa_gr)); + DEFINE(IA64_PMSA_BANK1_GR_OFFSET, + offsetof (struct pal_min_state_area_s, pmsa_bank1_gr)); + DEFINE(IA64_PMSA_PR_OFFSET, + offsetof (struct pal_min_state_area_s, pmsa_pr)); + DEFINE(IA64_PMSA_BR0_OFFSET, + offsetof (struct pal_min_state_area_s, pmsa_br0)); + DEFINE(IA64_PMSA_RSC_OFFSET, + offsetof (struct pal_min_state_area_s, pmsa_rsc)); + DEFINE(IA64_PMSA_IIP_OFFSET, + offsetof (struct pal_min_state_area_s, pmsa_iip)); + DEFINE(IA64_PMSA_IPSR_OFFSET, + offsetof (struct pal_min_state_area_s, pmsa_ipsr)); + DEFINE(IA64_PMSA_IFS_OFFSET, + offsetof (struct pal_min_state_area_s, pmsa_ifs)); + DEFINE(IA64_PMSA_XIP_OFFSET, + offsetof (struct pal_min_state_area_s, pmsa_xip)); + BLANK(); + /* used by fsys_gettimeofday in arch/ia64/kernel/fsys.S */ DEFINE(IA64_TIME_INTERPOLATOR_ADDRESS_OFFSET, offsetof (struct time_interpolator, addr)); DEFINE(IA64_TIME_INTERPOLATOR_SOURCE_OFFSET, offsetof (struct time_interpolator, source)); diff --git a/arch/ia64/kernel/domain.c b/arch/ia64/kernel/domain.c deleted file mode 100644 index bbb8efe..0000000 --- a/arch/ia64/kernel/domain.c +++ /dev/null @@ -1,396 +0,0 @@ -/* - * arch/ia64/kernel/domain.c - * Architecture specific sched-domains builder. - * - * Copyright (C) 2004 Jesse Barnes - * Copyright (C) 2004 Silicon Graphics, Inc. - */ - -#include <linux/sched.h> -#include <linux/percpu.h> -#include <linux/slab.h> -#include <linux/cpumask.h> -#include <linux/init.h> -#include <linux/topology.h> -#include <linux/nodemask.h> - -#define SD_NODES_PER_DOMAIN 16 - -#ifdef CONFIG_NUMA -/** - * find_next_best_node - find the next node to include in a sched_domain - * @node: node whose sched_domain we're building - * @used_nodes: nodes already in the sched_domain - * - * Find the next node to include in a given scheduling domain. Simply - * finds the closest node not already in the @used_nodes map. - * - * Should use nodemask_t. - */ -static int find_next_best_node(int node, unsigned long *used_nodes) -{ - int i, n, val, min_val, best_node = 0; - - min_val = INT_MAX; - - for (i = 0; i < MAX_NUMNODES; i++) { - /* Start at @node */ - n = (node + i) % MAX_NUMNODES; - - if (!nr_cpus_node(n)) - continue; - - /* Skip already used nodes */ - if (test_bit(n, used_nodes)) - continue; - - /* Simple min distance search */ - val = node_distance(node, n); - - if (val < min_val) { - min_val = val; - best_node = n; - } - } - - set_bit(best_node, used_nodes); - return best_node; -} - -/** - * sched_domain_node_span - get a cpumask for a node's sched_domain - * @node: node whose cpumask we're constructing - * @size: number of nodes to include in this span - * - * Given a node, construct a good cpumask for its sched_domain to span. It - * should be one that prevents unnecessary balancing, but also spreads tasks - * out optimally. - */ -static cpumask_t sched_domain_node_span(int node) -{ - int i; - cpumask_t span, nodemask; - DECLARE_BITMAP(used_nodes, MAX_NUMNODES); - - cpus_clear(span); - bitmap_zero(used_nodes, MAX_NUMNODES); - - nodemask = node_to_cpumask(node); - cpus_or(span, span, nodemask); - set_bit(node, used_nodes); - - for (i = 1; i < SD_NODES_PER_DOMAIN; i++) { - int next_node = find_next_best_node(node, used_nodes); - nodemask = node_to_cpumask(next_node); - cpus_or(span, span, nodemask); - } - - return span; -} -#endif - -/* - * At the moment, CONFIG_SCHED_SMT is never defined, but leave it in so we - * can switch it on easily if needed. - */ -#ifdef CONFIG_SCHED_SMT -static DEFINE_PER_CPU(struct sched_domain, cpu_domains); -static struct sched_group sched_group_cpus[NR_CPUS]; -static int cpu_to_cpu_group(int cpu) -{ - return cpu; -} -#endif - -static DEFINE_PER_CPU(struct sched_domain, phys_domains); -static struct sched_group sched_group_phys[NR_CPUS]; -static int cpu_to_phys_group(int cpu) -{ -#ifdef CONFIG_SCHED_SMT - return first_cpu(cpu_sibling_map[cpu]); -#else - return cpu; -#endif -} - -#ifdef CONFIG_NUMA -/* - * The init_sched_build_groups can't handle what we want to do with node - * groups, so roll our own. Now each node has its own list of groups which - * gets dynamically allocated. - */ -static DEFINE_PER_CPU(struct sched_domain, node_domains); -static struct sched_group *sched_group_nodes[MAX_NUMNODES]; - -static DEFINE_PER_CPU(struct sched_domain, allnodes_domains); -static struct sched_group sched_group_allnodes[MAX_NUMNODES]; - -static int cpu_to_allnodes_group(int cpu) -{ - return cpu_to_node(cpu); -} -#endif - -/* - * Build sched domains for a given set of cpus and attach the sched domains - * to the individual cpus - */ -void build_sched_domains(const cpumask_t *cpu_map) -{ - int i; - - /* - * Set up domains for cpus specified by the cpu_map. - */ - for_each_cpu_mask(i, *cpu_map) { - int group; - struct sched_domain *sd = NULL, *p; - cpumask_t nodemask = node_to_cpumask(cpu_to_node(i)); - - cpus_and(nodemask, nodemask, *cpu_map); - -#ifdef CONFIG_NUMA - if (num_online_cpus() - > SD_NODES_PER_DOMAIN*cpus_weight(nodemask)) { - sd = &per_cpu(allnodes_domains, i); - *sd = SD_ALLNODES_INIT; - sd->span = *cpu_map; - group = cpu_to_allnodes_group(i); - sd->groups = &sched_group_allnodes[group]; - p = sd; - } else - p = NULL; - - sd = &per_cpu(node_domains, i); - *sd = SD_NODE_INIT; - sd->span = sched_domain_node_span(cpu_to_node(i)); - sd->parent = p; - cpus_and(sd->span, sd->span, *cpu_map); -#endif - - p = sd; - sd = &per_cpu(phys_domains, i); - group = cpu_to_phys_group(i); - *sd = SD_CPU_INIT; - sd->span = nodemask; - sd->parent = p; - sd->groups = &sched_group_phys[group]; - -#ifdef CONFIG_SCHED_SMT - p = sd; - sd = &per_cpu(cpu_domains, i); - group = cpu_to_cpu_group(i); - *sd = SD_SIBLING_INIT; - sd->span = cpu_sibling_map[i]; - cpus_and(sd->span, sd->span, *cpu_map); - sd->parent = p; - sd->groups = &sched_group_cpus[group]; -#endif - } - -#ifdef CONFIG_SCHED_SMT - /* Set up CPU (sibling) groups */ - for_each_cpu_mask(i, *cpu_map) { - cpumask_t this_sibling_map = cpu_sibling_map[i]; - cpus_and(this_sibling_map, this_sibling_map, *cpu_map); - if (i != first_cpu(this_sibling_map)) - continue; - - init_sched_build_groups(sched_group_cpus, this_sibling_map, - &cpu_to_cpu_group); - } -#endif - - /* Set up physical groups */ - for (i = 0; i < MAX_NUMNODES; i++) { - cpumask_t nodemask = node_to_cpumask(i); - - cpus_and(nodemask, nodemask, *cpu_map); - if (cpus_empty(nodemask)) - continue; - - init_sched_build_groups(sched_group_phys, nodemask, - &cpu_to_phys_group); - } - -#ifdef CONFIG_NUMA - init_sched_build_groups(sched_group_allnodes, *cpu_map, - &cpu_to_allnodes_group); - - for (i = 0; i < MAX_NUMNODES; i++) { - /* Set up node groups */ - struct sched_group *sg, *prev; - cpumask_t nodemask = node_to_cpumask(i); - cpumask_t domainspan; - cpumask_t covered = CPU_MASK_NONE; - int j; - - cpus_and(nodemask, nodemask, *cpu_map); - if (cpus_empty(nodemask)) - continue; - - domainspan = sched_domain_node_span(i); - cpus_and(domainspan, domainspan, *cpu_map); - - sg = kmalloc(sizeof(struct sched_group), GFP_KERNEL); - sched_group_nodes[i] = sg; - for_each_cpu_mask(j, nodemask) { - struct sched_domain *sd; - sd = &per_cpu(node_domains, j); - sd->groups = sg; - if (sd->groups == NULL) { - /* Turn off balancing if we have no groups */ - sd->flags = 0; - } - } - if (!sg) { - printk(KERN_WARNING - "Can not alloc domain group for node %d\n", i); - continue; - } - sg->cpu_power = 0; - sg->cpumask = nodemask; - cpus_or(covered, covered, nodemask); - prev = sg; - - for (j = 0; j < MAX_NUMNODES; j++) { - cpumask_t tmp, notcovered; - int n = (i + j) % MAX_NUMNODES; - - cpus_complement(notcovered, covered); - cpus_and(tmp, notcovered, *cpu_map); - cpus_and(tmp, tmp, domainspan); - if (cpus_empty(tmp)) - break; - - nodemask = node_to_cpumask(n); - cpus_and(tmp, tmp, nodemask); - if (cpus_empty(tmp)) - continue; - - sg = kmalloc(sizeof(struct sched_group), GFP_KERNEL); - if (!sg) { - printk(KERN_WARNING - "Can not alloc domain group for node %d\n", j); - break; - } - sg->cpu_power = 0; - sg->cpumask = tmp; - cpus_or(covered, covered, tmp); - prev->next = sg; - prev = sg; - } - prev->next = sched_group_nodes[i]; - } -#endif - - /* Calculate CPU power for physical packages and nodes */ - for_each_cpu_mask(i, *cpu_map) { - int power; - struct sched_domain *sd; -#ifdef CONFIG_SCHED_SMT - sd = &per_cpu(cpu_domains, i); - power = SCHED_LOAD_SCALE; - sd->groups->cpu_power = power; -#endif - - sd = &per_cpu(phys_domains, i); - power = SCHED_LOAD_SCALE + SCHED_LOAD_SCALE * - (cpus_weight(sd->groups->cpumask)-1) / 10; - sd->groups->cpu_power = power; - -#ifdef CONFIG_NUMA - sd = &per_cpu(allnodes_domains, i); - if (sd->groups) { - power = SCHED_LOAD_SCALE + SCHED_LOAD_SCALE * - (cpus_weight(sd->groups->cpumask)-1) / 10; - sd->groups->cpu_power = power; - } -#endif - } - -#ifdef CONFIG_NUMA - for (i = 0; i < MAX_NUMNODES; i++) { - struct sched_group *sg = sched_group_nodes[i]; - int j; - - if (sg == NULL) - continue; -next_sg: - for_each_cpu_mask(j, sg->cpumask) { - struct sched_domain *sd; - int power; - - sd = &per_cpu(phys_domains, j); - if (j != first_cpu(sd->groups->cpumask)) { - /* - * Only add "power" once for each - * physical package. - */ - continue; - } - power = SCHED_LOAD_SCALE + SCHED_LOAD_SCALE * - (cpus_weight(sd->groups->cpumask)-1) / 10; - - sg->cpu_power += power; - } - sg = sg->next; - if (sg != sched_group_nodes[i]) - goto next_sg; - } -#endif - - /* Attach the domains */ - for_each_cpu_mask(i, *cpu_map) { - struct sched_domain *sd; -#ifdef CONFIG_SCHED_SMT - sd = &per_cpu(cpu_domains, i); -#else - sd = &per_cpu(phys_domains, i); -#endif - cpu_attach_domain(sd, i); - } -} -/* - * Set up scheduler domains and groups. Callers must hold the hotplug lock. - */ -void arch_init_sched_domains(const cpumask_t *cpu_map) -{ - cpumask_t cpu_default_map; - - /* - * Setup mask for cpus without special case scheduling requirements. - * For now this just excludes isolated cpus, but could be used to - * exclude other special cases in the future. - */ - cpus_andnot(cpu_default_map, *cpu_map, cpu_isolated_map); - - build_sched_domains(&cpu_default_map); -} - -void arch_destroy_sched_domains(const cpumask_t *cpu_map) -{ -#ifdef CONFIG_NUMA - int i; - for (i = 0; i < MAX_NUMNODES; i++) { - cpumask_t nodemask = node_to_cpumask(i); - struct sched_group *oldsg, *sg = sched_group_nodes[i]; - - cpus_and(nodemask, nodemask, *cpu_map); - if (cpus_empty(nodemask)) - continue; - - if (sg == NULL) - continue; - sg = sg->next; -next_sg: - oldsg = sg; - sg = sg->next; - kfree(oldsg); - if (oldsg != sched_group_nodes[i]) - goto next_sg; - sched_group_nodes[i] = NULL; - } -#endif -} - diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c index 179f230..f72ea6a 100644 --- a/arch/ia64/kernel/efi.c +++ b/arch/ia64/kernel/efi.c @@ -239,57 +239,30 @@ is_available_memory (efi_memory_desc_t *md) return 0; } -/* - * Trim descriptor MD so its starts at address START_ADDR. If the descriptor covers - * memory that is normally available to the kernel, issue a warning that some memory - * is being ignored. - */ -static void -trim_bottom (efi_memory_desc_t *md, u64 start_addr) -{ - u64 num_skipped_pages; +typedef struct kern_memdesc { + u64 attribute; + u64 start; + u64 num_pages; +} kern_memdesc_t; - if (md->phys_addr >= start_addr || !md->num_pages) - return; - - num_skipped_pages = (start_addr - md->phys_addr) >> EFI_PAGE_SHIFT; - if (num_skipped_pages > md->num_pages) - num_skipped_pages = md->num_pages; - - if (is_available_memory(md)) - printk(KERN_NOTICE "efi.%s: ignoring %luKB of memory at 0x%lx due to granule hole " - "at 0x%lx\n", __FUNCTION__, - (num_skipped_pages << EFI_PAGE_SHIFT) >> 10, - md->phys_addr, start_addr - IA64_GRANULE_SIZE); - /* - * NOTE: Don't set md->phys_addr to START_ADDR because that could cause the memory - * descriptor list to become unsorted. In such a case, md->num_pages will be - * zero, so the Right Thing will happen. - */ - md->phys_addr += num_skipped_pages << EFI_PAGE_SHIFT; - md->num_pages -= num_skipped_pages; -} +static kern_memdesc_t *kern_memmap; static void -trim_top (efi_memory_desc_t *md, u64 end_addr) +walk (efi_freemem_callback_t callback, void *arg, u64 attr) { - u64 num_dropped_pages, md_end_addr; - - md_end_addr = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT); - - if (md_end_addr <= end_addr || !md->num_pages) - return; + kern_memdesc_t *k; + u64 start, end, voff; - num_dropped_pages = (md_end_addr - end_addr) >> EFI_PAGE_SHIFT; - if (num_dropped_pages > md->num_pages) - num_dropped_pages = md->num_pages; - - if (is_available_memory(md)) - printk(KERN_NOTICE "efi.%s: ignoring %luKB of memory at 0x%lx due to granule hole " - "at 0x%lx\n", __FUNCTION__, - (num_dropped_pages << EFI_PAGE_SHIFT) >> 10, - md->phys_addr, end_addr); - md->num_pages -= num_dropped_pages; + voff = (attr == EFI_MEMORY_WB) ? PAGE_OFFSET : __IA64_UNCACHED_OFFSET; + for (k = kern_memmap; k->start != ~0UL; k++) { + if (k->attribute != attr) + continue; + start = PAGE_ALIGN(k->start); + end = (k->start + (k->num_pages << EFI_PAGE_SHIFT)) & PAGE_MASK; + if (start < end) + if ((*callback)(start + voff, end + voff, arg) < 0) + return; + } } /* @@ -299,148 +272,19 @@ trim_top (efi_memory_desc_t *md, u64 end_addr) void efi_memmap_walk (efi_freemem_callback_t callback, void *arg) { - int prev_valid = 0; - struct range { - u64 start; - u64 end; - } prev, curr; - void *efi_map_start, *efi_map_end, *p, *q; - efi_memory_desc_t *md, *check_md; - u64 efi_desc_size, start, end, granule_addr, last_granule_addr, first_non_wb_addr = 0; - unsigned long total_mem = 0; - - efi_map_start = __va(ia64_boot_param->efi_memmap); - efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size; - efi_desc_size = ia64_boot_param->efi_memdesc_size; - - for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) { - md = p; - - /* skip over non-WB memory descriptors; that's all we're interested in... */ - if (!(md->attribute & EFI_MEMORY_WB)) - continue; - - /* - * granule_addr is the base of md's first granule. - * [granule_addr - first_non_wb_addr) is guaranteed to - * be contiguous WB memory. - */ - granule_addr = GRANULEROUNDDOWN(md->phys_addr); - first_non_wb_addr = max(first_non_wb_addr, granule_addr); - - if (first_non_wb_addr < md->phys_addr) { - trim_bottom(md, granule_addr + IA64_GRANULE_SIZE); - granule_addr = GRANULEROUNDDOWN(md->phys_addr); - first_non_wb_addr = max(first_non_wb_addr, granule_addr); - } - - for (q = p; q < efi_map_end; q += efi_desc_size) { - check_md = q; - - if ((check_md->attribute & EFI_MEMORY_WB) && - (check_md->phys_addr == first_non_wb_addr)) - first_non_wb_addr += check_md->num_pages << EFI_PAGE_SHIFT; - else - break; /* non-WB or hole */ - } - - last_granule_addr = GRANULEROUNDDOWN(first_non_wb_addr); - if (last_granule_addr < md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT)) - trim_top(md, last_granule_addr); - - if (is_available_memory(md)) { - if (md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) >= max_addr) { - if (md->phys_addr >= max_addr) - continue; - md->num_pages = (max_addr - md->phys_addr) >> EFI_PAGE_SHIFT; - first_non_wb_addr = max_addr; - } - - if (total_mem >= mem_limit) - continue; - - if (total_mem + (md->num_pages << EFI_PAGE_SHIFT) > mem_limit) { - unsigned long limit_addr = md->phys_addr; - - limit_addr += mem_limit - total_mem; - limit_addr = GRANULEROUNDDOWN(limit_addr); - - if (md->phys_addr > limit_addr) - continue; - - md->num_pages = (limit_addr - md->phys_addr) >> - EFI_PAGE_SHIFT; - first_non_wb_addr = max_addr = md->phys_addr + - (md->num_pages << EFI_PAGE_SHIFT); - } - total_mem += (md->num_pages << EFI_PAGE_SHIFT); - - if (md->num_pages == 0) - continue; - - curr.start = PAGE_OFFSET + md->phys_addr; - curr.end = curr.start + (md->num_pages << EFI_PAGE_SHIFT); - - if (!prev_valid) { - prev = curr; - prev_valid = 1; - } else { - if (curr.start < prev.start) - printk(KERN_ERR "Oops: EFI memory table not ordered!\n"); - - if (prev.end == curr.start) { - /* merge two consecutive memory ranges */ - prev.end = curr.end; - } else { - start = PAGE_ALIGN(prev.start); - end = prev.end & PAGE_MASK; - if ((end > start) && (*callback)(start, end, arg) < 0) - return; - prev = curr; - } - } - } - } - if (prev_valid) { - start = PAGE_ALIGN(prev.start); - end = prev.end & PAGE_MASK; - if (end > start) - (*callback)(start, end, arg); - } + walk(callback, arg, EFI_MEMORY_WB); } /* - * Walk the EFI memory map to pull out leftover pages in the lower - * memory regions which do not end up in the regular memory map and - * stick them into the uncached allocator - * - * The regular walk function is significantly more complex than the - * uncached walk which means it really doesn't make sense to try and - * marge the two. + * Walks the EFI memory map and calls CALLBACK once for each EFI memory descriptor that + * has memory that is available for uncached allocator. */ -void __init -efi_memmap_walk_uc (efi_freemem_callback_t callback) +void +efi_memmap_walk_uc (efi_freemem_callback_t callback, void *arg) { - void *efi_map_start, *efi_map_end, *p; - efi_memory_desc_t *md; - u64 efi_desc_size, start, end; - - efi_map_start = __va(ia64_boot_param->efi_memmap); - efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size; - efi_desc_size = ia64_boot_param->efi_memdesc_size; - - for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) { - md = p; - if (md->attribute == EFI_MEMORY_UC) { - start = PAGE_ALIGN(md->phys_addr); - end = PAGE_ALIGN((md->phys_addr+(md->num_pages << EFI_PAGE_SHIFT)) & PAGE_MASK); - if ((*callback)(start, end, NULL) < 0) - return; - } - } + walk(callback, arg, EFI_MEMORY_UC); } - /* * Look for the PAL_CODE region reported by EFI and maps it using an * ITR to enable safe PAL calls in virtual mode. See IA-64 Processor @@ -862,3 +706,307 @@ efi_uart_console_only(void) printk(KERN_ERR "Malformed %s value\n", name); return 0; } + +#define efi_md_size(md) (md->num_pages << EFI_PAGE_SHIFT) + +static inline u64 +kmd_end(kern_memdesc_t *kmd) +{ + return (kmd->start + (kmd->num_pages << EFI_PAGE_SHIFT)); +} + +static inline u64 +efi_md_end(efi_memory_desc_t *md) +{ + return (md->phys_addr + efi_md_size(md)); +} + +static inline int +efi_wb(efi_memory_desc_t *md) +{ + return (md->attribute & EFI_MEMORY_WB); +} + +static inline int +efi_uc(efi_memory_desc_t *md) +{ + return (md->attribute & EFI_MEMORY_UC); +} + +/* + * Look for the first granule aligned memory descriptor memory + * that is big enough to hold EFI memory map. Make sure this + * descriptor is atleast granule sized so it does not get trimmed + */ +struct kern_memdesc * +find_memmap_space (void) +{ + u64 contig_low=0, contig_high=0; + u64 as = 0, ae; + void *efi_map_start, *efi_map_end, *p, *q; + efi_memory_desc_t *md, *pmd = NULL, *check_md; + u64 space_needed, efi_desc_size; + unsigned long total_mem = 0; + + efi_map_start = __va(ia64_boot_param->efi_memmap); + efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size; + efi_desc_size = ia64_boot_param->efi_memdesc_size; + + /* + * Worst case: we need 3 kernel descriptors for each efi descriptor + * (if every entry has a WB part in the middle, and UC head and tail), + * plus one for the end marker. + */ + space_needed = sizeof(kern_memdesc_t) * + (3 * (ia64_boot_param->efi_memmap_size/efi_desc_size) + 1); + + for (p = efi_map_start; p < efi_map_end; pmd = md, p += efi_desc_size) { + md = p; + if (!efi_wb(md)) { + continue; + } + if (pmd == NULL || !efi_wb(pmd) || efi_md_end(pmd) != md->phys_addr) { + contig_low = GRANULEROUNDUP(md->phys_addr); + contig_high = efi_md_end(md); + for (q = p + efi_desc_size; q < efi_map_end; q += efi_desc_size) { + check_md = q; + if (!efi_wb(check_md)) + break; + if (contig_high != check_md->phys_addr) + break; + contig_high = efi_md_end(check_md); + } + contig_high = GRANULEROUNDDOWN(contig_high); + } + if (!is_available_memory(md) || md->type == EFI_LOADER_DATA) + continue; + + /* Round ends inward to granule boundaries */ + as = max(contig_low, md->phys_addr); + ae = min(contig_high, efi_md_end(md)); + + /* keep within max_addr= command line arg */ + ae = min(ae, max_addr); + if (ae <= as) + continue; + + /* avoid going over mem= command line arg */ + if (total_mem + (ae - as) > mem_limit) + ae -= total_mem + (ae - as) - mem_limit; + + if (ae <= as) + continue; + + if (ae - as > space_needed) + break; + } + if (p >= efi_map_end) + panic("Can't allocate space for kernel memory descriptors"); + + return __va(as); +} + +/* + * Walk the EFI memory map and gather all memory available for kernel + * to use. We can allocate partial granules only if the unavailable + * parts exist, and are WB. + */ +void +efi_memmap_init(unsigned long *s, unsigned long *e) +{ + struct kern_memdesc *k, *prev = 0; + u64 contig_low=0, contig_high=0; + u64 as, ae, lim; + void *efi_map_start, *efi_map_end, *p, *q; + efi_memory_desc_t *md, *pmd = NULL, *check_md; + u64 efi_desc_size; + unsigned long total_mem = 0; + + k = kern_memmap = find_memmap_space(); + + efi_map_start = __va(ia64_boot_param->efi_memmap); + efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size; + efi_desc_size = ia64_boot_param->efi_memdesc_size; + + for (p = efi_map_start; p < efi_map_end; pmd = md, p += efi_desc_size) { + md = p; + if (!efi_wb(md)) { + if (efi_uc(md) && (md->type == EFI_CONVENTIONAL_MEMORY || + md->type == EFI_BOOT_SERVICES_DATA)) { + k->attribute = EFI_MEMORY_UC; + k->start = md->phys_addr; + k->num_pages = md->num_pages; + k++; + } + continue; + } + if (pmd == NULL || !efi_wb(pmd) || efi_md_end(pmd) != md->phys_addr) { + contig_low = GRANULEROUNDUP(md->phys_addr); + contig_high = efi_md_end(md); + for (q = p + efi_desc_size; q < efi_map_end; q += efi_desc_size) { + check_md = q; + if (!efi_wb(check_md)) + break; + if (contig_high != check_md->phys_addr) + break; + contig_high = efi_md_end(check_md); + } + contig_high = GRANULEROUNDDOWN(contig_high); + } + if (!is_available_memory(md)) + continue; + + /* + * Round ends inward to granule boundaries + * Give trimmings to uncached allocator + */ + if (md->phys_addr < contig_low) { + lim = min(efi_md_end(md), contig_low); + if (efi_uc(md)) { + if (k > kern_memmap && (k-1)->attribute == EFI_MEMORY_UC && + kmd_end(k-1) == md->phys_addr) { + (k-1)->num_pages += (lim - md->phys_addr) >> EFI_PAGE_SHIFT; + } else { + k->attribute = EFI_MEMORY_UC; + k->start = md->phys_addr; + k->num_pages = (lim - md->phys_addr) >> EFI_PAGE_SHIFT; + k++; + } + } + as = contig_low; + } else + as = md->phys_addr; + + if (efi_md_end(md) > contig_high) { + lim = max(md->phys_addr, contig_high); + if (efi_uc(md)) { + if (lim == md->phys_addr && k > kern_memmap && + (k-1)->attribute == EFI_MEMORY_UC && + kmd_end(k-1) == md->phys_addr) { + (k-1)->num_pages += md->num_pages; + } else { + k->attribute = EFI_MEMORY_UC; + k->start = lim; + k->num_pages = (efi_md_end(md) - lim) >> EFI_PAGE_SHIFT; + k++; + } + } + ae = contig_high; + } else + ae = efi_md_end(md); + + /* keep within max_addr= command line arg */ + ae = min(ae, max_addr); + if (ae <= as) + continue; + + /* avoid going over mem= command line arg */ + if (total_mem + (ae - as) > mem_limit) + ae -= total_mem + (ae - as) - mem_limit; + + if (ae <= as) + continue; + if (prev && kmd_end(prev) == md->phys_addr) { + prev->num_pages += (ae - as) >> EFI_PAGE_SHIFT; + total_mem += ae - as; + continue; + } + k->attribute = EFI_MEMORY_WB; + k->start = as; + k->num_pages = (ae - as) >> EFI_PAGE_SHIFT; + total_mem += ae - as; + prev = k++; + } + k->start = ~0L; /* end-marker */ + + /* reserve the memory we are using for kern_memmap */ + *s = (u64)kern_memmap; + *e = (u64)++k; +} + +void +efi_initialize_iomem_resources(struct resource *code_resource, + struct resource *data_resource) +{ + struct resource *res; + void *efi_map_start, *efi_map_end, *p; + efi_memory_desc_t *md; + u64 efi_desc_size; + char *name; + unsigned long flags; + + efi_map_start = __va(ia64_boot_param->efi_memmap); + efi_map_end = efi_map_start + ia64_boot_param->efi_memmap_size; + efi_desc_size = ia64_boot_param->efi_memdesc_size; + + res = NULL; + + for (p = efi_map_start; p < efi_map_end; p += efi_desc_size) { + md = p; + + if (md->num_pages == 0) /* should not happen */ + continue; + + flags = IORESOURCE_MEM; + switch (md->type) { + + case EFI_MEMORY_MAPPED_IO: + case EFI_MEMORY_MAPPED_IO_PORT_SPACE: + continue; + + case EFI_LOADER_CODE: + case EFI_LOADER_DATA: + case EFI_BOOT_SERVICES_DATA: + case EFI_BOOT_SERVICES_CODE: + case EFI_CONVENTIONAL_MEMORY: + if (md->attribute & EFI_MEMORY_WP) { + name = "System ROM"; + flags |= IORESOURCE_READONLY; + } else { + name = "System RAM"; + } + break; + + case EFI_ACPI_MEMORY_NVS: + name = "ACPI Non-volatile Storage"; + flags |= IORESOURCE_BUSY; + break; + + case EFI_UNUSABLE_MEMORY: + name = "reserved"; + flags |= IORESOURCE_BUSY | IORESOURCE_DISABLED; + break; + + case EFI_RESERVED_TYPE: + case EFI_RUNTIME_SERVICES_CODE: + case EFI_RUNTIME_SERVICES_DATA: + case EFI_ACPI_RECLAIM_MEMORY: + default: + name = "reserved"; + flags |= IORESOURCE_BUSY; + break; + } + + if ((res = kcalloc(1, sizeof(struct resource), GFP_KERNEL)) == NULL) { + printk(KERN_ERR "failed to alocate resource for iomem\n"); + return; + } + + res->name = name; + res->start = md->phys_addr; + res->end = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT) - 1; + res->flags = flags; + + if (insert_resource(&iomem_resource, res) < 0) + kfree(res); + else { + /* + * We don't know which region contains + * kernel data so we try it repeatedly and + * let the resource manager test it. + */ + insert_resource(res, code_resource); + insert_resource(res, data_resource); + } + } +} diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 9be53e1..0741b066 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -37,7 +37,7 @@ #include <asm/cache.h> #include <asm/errno.h> #include <asm/kregs.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/pgtable.h> #include <asm/percpu.h> #include <asm/processor.h> @@ -204,9 +204,6 @@ GLOBAL_ENTRY(ia64_switch_to) (p6) br.cond.dpnt .map ;; .done: -(p6) ssm psr.ic // if we had to map, reenable the psr.ic bit FIRST!!! - ;; -(p6) srlz.d ld8 sp=[r21] // load kernel stack pointer of new task mov IA64_KR(CURRENT)=in0 // update "current" application register mov r8=r13 // return pointer to previously running task @@ -234,6 +231,9 @@ GLOBAL_ENTRY(ia64_switch_to) mov IA64_KR(CURRENT_STACK)=r26 // remember last page we mapped... ;; itr.d dtr[r25]=r23 // wire in new mapping... + ssm psr.ic // reenable the psr.ic bit + ;; + srlz.d br.cond.sptk .done END(ia64_switch_to) @@ -470,6 +470,29 @@ ENTRY(load_switch_stack) br.cond.sptk.many b7 END(load_switch_stack) +GLOBAL_ENTRY(prefetch_stack) + add r14 = -IA64_SWITCH_STACK_SIZE, sp + add r15 = IA64_TASK_THREAD_KSP_OFFSET, in0 + ;; + ld8 r16 = [r15] // load next's stack pointer + lfetch.fault.excl [r14], 128 + ;; + lfetch.fault.excl [r14], 128 + lfetch.fault [r16], 128 + ;; + lfetch.fault.excl [r14], 128 + lfetch.fault [r16], 128 + ;; + lfetch.fault.excl [r14], 128 + lfetch.fault [r16], 128 + ;; + lfetch.fault.excl [r14], 128 + lfetch.fault [r16], 128 + ;; + lfetch.fault [r16], 128 + br.ret.sptk.many rp +END(prefetch_stack) + GLOBAL_ENTRY(execve) mov r15=__NR_execve // put syscall number in place break __BREAK_SYSCALL diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S index 7d7684a..2ddbac6 100644 --- a/arch/ia64/kernel/fsys.S +++ b/arch/ia64/kernel/fsys.S @@ -14,7 +14,7 @@ #include <asm/asmmacro.h> #include <asm/errno.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/percpu.h> #include <asm/thread_info.h> #include <asm/sal.h> diff --git a/arch/ia64/kernel/gate.S b/arch/ia64/kernel/gate.S index 86948ce..86064ca 100644 --- a/arch/ia64/kernel/gate.S +++ b/arch/ia64/kernel/gate.S @@ -10,7 +10,7 @@ #include <asm/asmmacro.h> #include <asm/errno.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/sigcontext.h> #include <asm/system.h> #include <asm/unistd.h> diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S index 8d3a929..bfe65b2 100644 --- a/arch/ia64/kernel/head.S +++ b/arch/ia64/kernel/head.S @@ -25,7 +25,7 @@ #include <asm/fpu.h> #include <asm/kregs.h> #include <asm/mmu_context.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/pal.h> #include <asm/pgtable.h> #include <asm/processor.h> diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index 7936b62..574084f 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -561,7 +561,7 @@ static inline int vector_is_shared (int vector) return (iosapic_intr_info[vector].count > 1); } -static void +static int register_intr (unsigned int gsi, int vector, unsigned char delivery, unsigned long polarity, unsigned long trigger) { @@ -576,7 +576,7 @@ register_intr (unsigned int gsi, int vector, unsigned char delivery, index = find_iosapic(gsi); if (index < 0) { printk(KERN_WARNING "%s: No IOSAPIC for GSI %u\n", __FUNCTION__, gsi); - return; + return -ENODEV; } iosapic_address = iosapic_lists[index].addr; @@ -587,7 +587,7 @@ register_intr (unsigned int gsi, int vector, unsigned char delivery, rte = iosapic_alloc_rte(); if (!rte) { printk(KERN_WARNING "%s: cannot allocate memory\n", __FUNCTION__); - return; + return -ENOMEM; } rte_index = gsi - gsi_base; @@ -603,7 +603,7 @@ register_intr (unsigned int gsi, int vector, unsigned char delivery, struct iosapic_intr_info *info = &iosapic_intr_info[vector]; if (info->trigger != trigger || info->polarity != polarity) { printk (KERN_WARNING "%s: cannot override the interrupt\n", __FUNCTION__); - return; + return -EINVAL; } } @@ -623,6 +623,7 @@ register_intr (unsigned int gsi, int vector, unsigned char delivery, __FUNCTION__, vector, idesc->handler->typename, irq_type->typename); idesc->handler = irq_type; } + return 0; } static unsigned int @@ -710,7 +711,7 @@ int iosapic_register_intr (unsigned int gsi, unsigned long polarity, unsigned long trigger) { - int vector, mask = 1; + int vector, mask = 1, err; unsigned int dest; unsigned long flags; struct iosapic_rte_info *rte; @@ -737,8 +738,8 @@ again: vector = assign_irq_vector(AUTO_ASSIGN); if (vector < 0) { vector = iosapic_find_sharable_vector(trigger, polarity); - if (vector < 0) - panic("%s: out of interrupt vectors!\n", __FUNCTION__); + if (vector < 0) + return -ENOSPC; } spin_lock_irqsave(&irq_descp(vector)->lock, flags); @@ -753,8 +754,13 @@ again: } dest = get_target_cpu(gsi, vector); - register_intr(gsi, vector, IOSAPIC_LOWEST_PRIORITY, + err = register_intr(gsi, vector, IOSAPIC_LOWEST_PRIORITY, polarity, trigger); + if (err < 0) { + spin_unlock(&iosapic_lock); + spin_unlock_irqrestore(&irq_descp(vector)->lock, flags); + return err; + } /* * If the vector is shared and already unmasked for @@ -776,7 +782,6 @@ again: return vector; } -#ifdef CONFIG_ACPI_DEALLOCATE_IRQ void iosapic_unregister_intr (unsigned int gsi) { @@ -859,7 +864,6 @@ iosapic_unregister_intr (unsigned int gsi) spin_unlock(&iosapic_lock); spin_unlock_irqrestore(&idesc->lock, flags); } -#endif /* CONFIG_ACPI_DEALLOCATE_IRQ */ /* * ACPI calls this when it finds an entry for a platform interrupt. diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c index 28f2aad..d33244c 100644 --- a/arch/ia64/kernel/irq.c +++ b/arch/ia64/kernel/irq.c @@ -57,9 +57,9 @@ int show_interrupts(struct seq_file *p, void *v) if (i == 0) { seq_printf(p, " "); - for (j=0; j<NR_CPUS; j++) - if (cpu_online(j)) - seq_printf(p, "CPU%d ",j); + for_each_online_cpu(j) { + seq_printf(p, "CPU%d ",j); + } seq_putc(p, '\n'); } @@ -72,9 +72,9 @@ int show_interrupts(struct seq_file *p, void *v) #ifndef CONFIG_SMP seq_printf(p, "%10u ", kstat_irqs(i)); #else - for (j = 0; j < NR_CPUS; j++) - if (cpu_online(j)) - seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); + for_each_online_cpu(j) { + seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); + } #endif seq_printf(p, " %14s", irq_desc[i].handler->typename); seq_printf(p, " %s", action->name); @@ -91,23 +91,8 @@ skip: } #ifdef CONFIG_SMP -/* - * This is updated when the user sets irq affinity via /proc - */ -static cpumask_t __cacheline_aligned pending_irq_cpumask[NR_IRQS]; -static unsigned long pending_irq_redir[BITS_TO_LONGS(NR_IRQS)]; - static char irq_redir [NR_IRQS]; // = { [0 ... NR_IRQS-1] = 1 }; -/* - * Arch specific routine for deferred write to iosapic rte to reprogram - * intr destination. - */ -void proc_set_irq_affinity(unsigned int irq, cpumask_t mask_val) -{ - pending_irq_cpumask[irq] = mask_val; -} - void set_irq_affinity_info (unsigned int irq, int hwid, int redir) { cpumask_t mask = CPU_MASK_NONE; @@ -116,32 +101,10 @@ void set_irq_affinity_info (unsigned int irq, int hwid, int redir) if (irq < NR_IRQS) { irq_affinity[irq] = mask; + set_irq_info(irq, mask); irq_redir[irq] = (char) (redir & 0xff); } } - - -void move_irq(int irq) -{ - /* note - we hold desc->lock */ - cpumask_t tmp; - irq_desc_t *desc = irq_descp(irq); - int redir = test_bit(irq, pending_irq_redir); - - if (unlikely(!desc->handler->set_affinity)) - return; - - if (!cpus_empty(pending_irq_cpumask[irq])) { - cpus_and(tmp, pending_irq_cpumask[irq], cpu_online_map); - if (unlikely(!cpus_empty(tmp))) { - desc->handler->set_affinity(irq | (redir ? IA64_IRQ_REDIRECTED : 0), - pending_irq_cpumask[irq]); - } - cpus_clear(pending_irq_cpumask[irq]); - } -} - - #endif /* CONFIG_SMP */ #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S index 3bb3a13..c13ca0d 100644 --- a/arch/ia64/kernel/ivt.S +++ b/arch/ia64/kernel/ivt.S @@ -44,7 +44,7 @@ #include <asm/break.h> #include <asm/ia32.h> #include <asm/kregs.h> -#include <asm/offsets.h> +#include <asm/asm-offsets.h> #include <asm/pgtable.h> #include <asm/processor.h> #include <asm/ptrace.h> @@ -69,7 +69,6 @@ # define DBG_FAULT(i) #endif -#define MINSTATE_VIRT /* needed by minstate.h */ #include "minstate.h" #define FAULT(n) \ diff --git a/arch/ia64/kernel/jprobes.S b/arch/ia64/kernel/jprobes.S index b7fa3cc..2323377 100644 --- a/arch/ia64/kernel/jprobes.S +++ b/arch/ia64/kernel/jprobes.S @@ -49,6 +49,7 @@ /* * void jprobe_break(void) */ + .section .kprobes.text, "ax" ENTRY(jprobe_break) break.m 0x80300 END(jprobe_break) diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c index 884f5cd..471086b 100644 --- a/arch/ia64/kernel/kprobes.c +++ b/arch/ia64/kernel/kprobes.c @@ -87,12 +87,25 @@ static enum instruction_type bundle_encoding[32][3] = { * is IP relative instruction and update the kprobe * inst flag accordingly */ -static void update_kprobe_inst_flag(uint template, uint slot, uint major_opcode, - unsigned long kprobe_inst, struct kprobe *p) +static void __kprobes update_kprobe_inst_flag(uint template, uint slot, + uint major_opcode, + unsigned long kprobe_inst, + struct kprobe *p) { p->ainsn.inst_flag = 0; p->ainsn.target_br_reg = 0; + /* Check for Break instruction + * Bits 37:40 Major opcode to be zero + * Bits 27:32 X6 to be zero + * Bits 32:35 X3 to be zero + */ + if ((!major_opcode) && (!((kprobe_inst >> 27) & 0x1FF)) ) { + /* is a break instruction */ + p->ainsn.inst_flag |= INST_FLAG_BREAK_INST; + return; + } + if (bundle_encoding[template][slot] == B) { switch (major_opcode) { case INDIRECT_CALL_OPCODE: @@ -126,8 +139,10 @@ static void update_kprobe_inst_flag(uint template, uint slot, uint major_opcode * Returns 0 if supported * Returns -EINVAL if unsupported */ -static int unsupported_inst(uint template, uint slot, uint major_opcode, - unsigned long kprobe_inst, struct kprobe *p) +static int __kprobes unsupported_inst(uint template, uint slot, + uint major_opcode, + unsigned long kprobe_inst, + struct kprobe *p) { unsigned long addr = (unsigned long)p->addr; @@ -168,8 +183,9 @@ static int unsupported_inst(uint template, uint slot, uint major_opcode, * on which we are inserting kprobe is cmp instruction * with ctype as unc. */ -static uint is_cmp_ctype_unc_inst(uint template, uint slot, uint major_opcode, -unsigned long kprobe_inst) +static uint __kprobes is_cmp_ctype_unc_inst(uint template, uint slot, + uint major_opcode, + unsigned long kprobe_inst) { cmp_inst_t cmp_inst; uint ctype_unc = 0; @@ -201,8 +217,10 @@ out: * In this function we override the bundle with * the break instruction at the given slot. */ -static void prepare_break_inst(uint template, uint slot, uint major_opcode, - unsigned long kprobe_inst, struct kprobe *p) +static void __kprobes prepare_break_inst(uint template, uint slot, + uint major_opcode, + unsigned long kprobe_inst, + struct kprobe *p) { unsigned long break_inst = BREAK_INST; bundle_t *bundle = &p->ainsn.insn.bundle; @@ -271,7 +289,8 @@ static inline int in_ivt_functions(unsigned long addr) && addr < (unsigned long)__end_ivt_text); } -static int valid_kprobe_addr(int template, int slot, unsigned long addr) +static int __kprobes valid_kprobe_addr(int template, int slot, + unsigned long addr) { if ((slot > 2) || ((bundle_encoding[template][1] == L) && slot > 1)) { printk(KERN_WARNING "Attempting to insert unaligned kprobe " @@ -323,7 +342,7 @@ static void kretprobe_trampoline(void) * - cleanup by marking the instance as unused * - long jump back to the original return address */ -int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) { struct kretprobe_instance *ri = NULL; struct hlist_head *head; @@ -381,7 +400,8 @@ int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) return 1; } -void arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) +void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, + struct pt_regs *regs) { struct kretprobe_instance *ri; @@ -399,7 +419,7 @@ void arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs) } } -int arch_prepare_kprobe(struct kprobe *p) +int __kprobes arch_prepare_kprobe(struct kprobe *p) { unsigned long addr = (unsigned long) p->addr; unsigned long *kprobe_addr = (unsigned long *)(addr & ~0xFULL); @@ -430,7 +450,7 @@ int arch_prepare_kprobe(struct kprobe *p) return 0; } -void arch_arm_kprobe(struct kprobe *p) +void __kprobes arch_arm_kprobe(struct kprobe *p) { unsigned long addr = (unsigned long)p->addr; unsigned long arm_addr = addr & ~0xFULL; @@ -439,7 +459,7 @@ void arch_arm_kprobe(struct kprobe *p) flush_icache_range(arm_addr, arm_addr + sizeof(bundle_t)); } -void arch_disarm_kprobe(struct kprobe *p) +void __kprobes arch_disarm_kprobe(struct kprobe *p) { unsigned long addr = (unsigned long)p->addr; unsigned long arm_addr = addr & ~0xFULL; @@ -449,7 +469,7 @@ void arch_disarm_kprobe(struct kprobe *p) flush_icache_range(arm_addr, arm_addr + sizeof(bundle_t)); } -void arch_remove_kprobe(struct kprobe *p) +void __kprobes arch_remove_kprobe(struct kprobe *p) { } @@ -461,7 +481,7 @@ void arch_remove_kprobe(struct kprobe *p) * to original stack address, handle the case where we need to fixup the * relative IP address and/or fixup branch register. */ -static void resume_execution(struct kprobe *p, struct pt_regs *regs) +static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) { unsigned long bundle_addr = ((unsigned long) (&p->opcode.bundle)) & ~0xFULL; unsigned long resume_addr = (unsigned long)p->addr & ~0xFULL; @@ -528,13 +548,16 @@ turn_ss_off: ia64_psr(regs)->ss = 0; } -static void prepare_ss(struct kprobe *p, struct pt_regs *regs) +static void __kprobes prepare_ss(struct kprobe *p, struct pt_regs *regs) { unsigned long bundle_addr = (unsigned long) &p->opcode.bundle; unsigned long slot = (unsigned long)p->addr & 0xf; - /* Update instruction pointer (IIP) and slot number (IPSR.ri) */ - regs->cr_iip = bundle_addr & ~0xFULL; + /* single step inline if break instruction */ + if (p->ainsn.inst_flag == INST_FLAG_BREAK_INST) + regs->cr_iip = (unsigned long)p->addr & ~0xFULL; + else + regs->cr_iip = bundle_addr & ~0xFULL; if (slot > 2) slot = 0; @@ -545,7 +568,39 @@ static void prepare_ss(struct kprobe *p, struct pt_regs *regs) ia64_psr(regs)->ss = 1; } -static int pre_kprobes_handler(struct die_args *args) +static int __kprobes is_ia64_break_inst(struct pt_regs *regs) +{ + unsigned int slot = ia64_psr(regs)->ri; + unsigned int template, major_opcode; + unsigned long kprobe_inst; + unsigned long *kprobe_addr = (unsigned long *)regs->cr_iip; + bundle_t bundle; + + memcpy(&bundle, kprobe_addr, sizeof(bundle_t)); + template = bundle.quad0.template; + + /* Move to slot 2, if bundle is MLX type and kprobe slot is 1 */ + if (slot == 1 && bundle_encoding[template][1] == L) + slot++; + + /* Get Kprobe probe instruction at given slot*/ + get_kprobe_inst(&bundle, slot, &kprobe_inst, &major_opcode); + + /* For break instruction, + * Bits 37:40 Major opcode to be zero + * Bits 27:32 X6 to be zero + * Bits 32:35 X3 to be zero + */ + if (major_opcode || ((kprobe_inst >> 27) & 0x1FF) ) { + /* Not a break instruction */ + return 0; + } + + /* Is a break instruction */ + return 1; +} + +static int __kprobes pre_kprobes_handler(struct die_args *args) { struct kprobe *p; int ret = 0; @@ -558,7 +613,9 @@ static int pre_kprobes_handler(struct die_args *args) if (kprobe_running()) { p = get_kprobe(addr); if (p) { - if (kprobe_status == KPROBE_HIT_SS) { + if ( (kprobe_status == KPROBE_HIT_SS) && + (p->ainsn.inst_flag == INST_FLAG_BREAK_INST)) { + ia64_psr(regs)->ss = 0; unlock_kprobes(); goto no_kprobe; } @@ -592,6 +649,19 @@ static int pre_kprobes_handler(struct die_args *args) p = get_kprobe(addr); if (!p) { unlock_kprobes(); + if (!is_ia64_break_inst(regs)) { + /* + * The breakpoint instruction was removed right + * after we hit it. Another cpu has removed + * either a probepoint or a debugger breakpoint + * at this address. In either case, no further + * handling of this interrupt is appropriate. + */ + ret = 1; + + } + + /* Not one of our break, let kernel handle it */ goto no_kprobe; } @@ -616,7 +686,7 @@ no_kprobe: return ret; } -static int post_kprobes_handler(struct pt_regs *regs) +static int __kprobes post_kprobes_handler(struct pt_regs *regs) { if (!kprobe_running()) return 0; @@ -641,7 +711,7 @@ out: return 1; } -static int kprobes_fault_handler(struct pt_regs *regs, int trapnr) +static int __kprobes kprobes_fault_handler(struct pt_regs *regs, int trapnr) { if (!kprobe_running()) return 0; @@ -659,8 +729,8 @@ static int kprobes_fault_handler(struct pt_regs *regs, int trapnr) return 0; } -int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, - void *data) +int __kprobes kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; switch(val) { @@ -681,7 +751,7 @@ int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, return NOTIFY_DONE; } -int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) { struct jprobe *jp = container_of(p, struct jprobe, kp); unsigned long addr = ((struct fnptr *)(jp->entry))->ip; @@ -703,7 +773,7 @@ int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) return 1; } -int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) +int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) { *regs = jprobe_saved_regs; return 1; diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 4ebbf39..52c47da 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -48,6 +48,9 @@ * Delete dead variables and functions. * Reorder to remove the need for forward declarations and to consolidate * related code. + * + * 2005-08-12 Keith Owens <kaos@sgi.com> + * Convert MCA/INIT handlers to use per event stacks and SAL/OS state. */ #include <linux/config.h> #include <linux/types.h> @@ -77,6 +80,8 @@ #include <asm/irq.h> #include <asm/hw_irq.h> +#include "entry.h" + #if defined(IA64_MCA_DEBUG_INFO) # define IA64_MCA_DEBUG(fmt...) printk(fmt) #else @@ -84,9 +89,7 @@ #endif /* Used by mca_asm.S */ -ia64_mca_sal_to_os_state_t ia64_sal_to_os_handoff_state; -ia64_mca_os_to_sal_state_t ia64_os_to_sal_handoff_state; -u64 ia64_mca_serialize; +u32 ia64_mca_serialize; DEFINE_PER_CPU(u64, ia64_mca_data); /* == __per_cpu_mca[smp_processor_id()] */ DEFINE_PER_CPU(u64, ia64_mca_per_cpu_pte); /* PTE to map per-CPU area */ DEFINE_PER_CPU(u64, ia64_mca_pal_pte); /* PTE to map PAL code */ @@ -95,8 +98,10 @@ DEFINE_PER_CPU(u64, ia64_mca_pal_base); /* vaddr PAL code granule */ unsigned long __per_cpu_mca[NR_CPUS]; /* In mca_asm.S */ -extern void ia64_monarch_init_handler (void); -extern void ia64_slave_init_handler (void); +extern void ia64_os_init_dispatch_monarch (void); +extern void ia64_os_init_dispatch_slave (void); + +static int monarch_cpu = -1; static ia64_mc_info_t ia64_mc_info; @@ -234,7 +239,8 @@ ia64_log_get(int sal_info_type, u8 **buffer, int irq_safe) * This function retrieves a specified error record type from SAL * and wakes up any processes waiting for error records. * - * Inputs : sal_info_type (Type of error record MCA/CMC/CPE/INIT) + * Inputs : sal_info_type (Type of error record MCA/CMC/CPE) + * FIXME: remove MCA and irq_safe. */ static void ia64_mca_log_sal_error_record(int sal_info_type) @@ -242,7 +248,7 @@ ia64_mca_log_sal_error_record(int sal_info_type) u8 *buffer; sal_log_record_header_t *rh; u64 size; - int irq_safe = sal_info_type != SAL_INFO_TYPE_MCA && sal_info_type != SAL_INFO_TYPE_INIT; + int irq_safe = sal_info_type != SAL_INFO_TYPE_MCA; #ifdef IA64_MCA_DEBUG_INFO static const char * const rec_name[] = { "MCA", "INIT", "CMC", "CPE" }; #endif @@ -330,191 +336,6 @@ ia64_mca_cpe_int_handler (int cpe_irq, void *arg, struct pt_regs *ptregs) #endif /* CONFIG_ACPI */ -static void -show_min_state (pal_min_state_area_t *minstate) -{ - u64 iip = minstate->pmsa_iip + ((struct ia64_psr *)(&minstate->pmsa_ipsr))->ri; - u64 xip = minstate->pmsa_xip + ((struct ia64_psr *)(&minstate->pmsa_xpsr))->ri; - - printk("NaT bits\t%016lx\n", minstate->pmsa_nat_bits); - printk("pr\t\t%016lx\n", minstate->pmsa_pr); - printk("b0\t\t%016lx ", minstate->pmsa_br0); print_symbol("%s\n", minstate->pmsa_br0); - printk("ar.rsc\t\t%016lx\n", minstate->pmsa_rsc); - printk("cr.iip\t\t%016lx ", iip); print_symbol("%s\n", iip); - printk("cr.ipsr\t\t%016lx\n", minstate->pmsa_ipsr); - printk("cr.ifs\t\t%016lx\n", minstate->pmsa_ifs); - printk("xip\t\t%016lx ", xip); print_symbol("%s\n", xip); - printk("xpsr\t\t%016lx\n", minstate->pmsa_xpsr); - printk("xfs\t\t%016lx\n", minstate->pmsa_xfs); - printk("b1\t\t%016lx ", minstate->pmsa_br1); - print_symbol("%s\n", minstate->pmsa_br1); - - printk("\nstatic registers r0-r15:\n"); - printk(" r0- 3 %016lx %016lx %016lx %016lx\n", - 0UL, minstate->pmsa_gr[0], minstate->pmsa_gr[1], minstate->pmsa_gr[2]); - printk(" r4- 7 %016lx %016lx %016lx %016lx\n", - minstate->pmsa_gr[3], minstate->pmsa_gr[4], - minstate->pmsa_gr[5], minstate->pmsa_gr[6]); - printk(" r8-11 %016lx %016lx %016lx %016lx\n", - minstate->pmsa_gr[7], minstate->pmsa_gr[8], - minstate->pmsa_gr[9], minstate->pmsa_gr[10]); - printk("r12-15 %016lx %016lx %016lx %016lx\n", - minstate->pmsa_gr[11], minstate->pmsa_gr[12], - minstate->pmsa_gr[13], minstate->pmsa_gr[14]); - - printk("\nbank 0:\n"); - printk("r16-19 %016lx %016lx %016lx %016lx\n", - minstate->pmsa_bank0_gr[0], minstate->pmsa_bank0_gr[1], - minstate->pmsa_bank0_gr[2], minstate->pmsa_bank0_gr[3]); - printk("r20-23 %016lx %016lx %016lx %016lx\n", - minstate->pmsa_bank0_gr[4], minstate->pmsa_bank0_gr[5], - minstate->pmsa_bank0_gr[6], minstate->pmsa_bank0_gr[7]); - printk("r24-27 %016lx %016lx %016lx %016lx\n", - minstate->pmsa_bank0_gr[8], minstate->pmsa_bank0_gr[9], - minstate->pmsa_bank0_gr[10], minstate->pmsa_bank0_gr[11]); - printk("r28-31 %016lx %016lx %016lx %016lx\n", - minstate->pmsa_bank0_gr[12], minstate->pmsa_bank0_gr[13], - minstate->pmsa_bank0_gr[14], minstate->pmsa_bank0_gr[15]); - - printk("\nbank 1:\n"); - printk("r16-19 %016lx %016lx %016lx %016lx\n", - minstate->pmsa_bank1_gr[0], minstate->pmsa_bank1_gr[1], - minstate->pmsa_bank1_gr[2], minstate->pmsa_bank1_gr[3]); - printk("r20-23 %016lx %016lx %016lx %016lx\n", - minstate->pmsa_bank1_gr[4], minstate->pmsa_bank1_gr[5], - minstate->pmsa_bank1_gr[6], minstate->pmsa_bank1_gr[7]); - printk("r24-27 %016lx %016lx %016lx %016lx\n", - minstate->pmsa_bank1_gr[8], minstate->pmsa_bank1_gr[9], - minstate->pmsa_bank1_gr[10], minstate->pmsa_bank1_gr[11]); - printk("r28-31 %016lx %016lx %016lx %016lx\n", - minstate->pmsa_bank1_gr[12], minstate->pmsa_bank1_gr[13], - minstate->pmsa_bank1_gr[14], minstate->pmsa_bank1_gr[15]); -} - -static void -fetch_min_state (pal_min_state_area_t *ms, struct pt_regs *pt, struct switch_stack *sw) -{ - u64 *dst_banked, *src_banked, bit, shift, nat_bits; - int i; - - /* - * First, update the pt-regs and switch-stack structures with the contents stored - * in the min-state area: - */ - if (((struct ia64_psr *) &ms->pmsa_ipsr)->ic == 0) { - pt->cr_ipsr = ms->pmsa_xpsr; - pt->cr_iip = ms->pmsa_xip; - pt->cr_ifs = ms->pmsa_xfs; - } else { - pt->cr_ipsr = ms->pmsa_ipsr; - pt->cr_iip = ms->pmsa_iip; - pt->cr_ifs = ms->pmsa_ifs; - } - pt->ar_rsc = ms->pmsa_rsc; - pt->pr = ms->pmsa_pr; - pt->r1 = ms->pmsa_gr[0]; - pt->r2 = ms->pmsa_gr[1]; - pt->r3 = ms->pmsa_gr[2]; - sw->r4 = ms->pmsa_gr[3]; - sw->r5 = ms->pmsa_gr[4]; - sw->r6 = ms->pmsa_gr[5]; - sw->r7 = ms->pmsa_gr[6]; - pt->r8 = ms->pmsa_gr[7]; - pt->r9 = ms->pmsa_gr[8]; - pt->r10 = ms->pmsa_gr[9]; - pt->r11 = ms->pmsa_gr[10]; - pt->r12 = ms->pmsa_gr[11]; - pt->r13 = ms->pmsa_gr[12]; - pt->r14 = ms->pmsa_gr[13]; - pt->r15 = ms->pmsa_gr[14]; - dst_banked = &pt->r16; /* r16-r31 are contiguous in struct pt_regs */ - src_banked = ms->pmsa_bank1_gr; - for (i = 0; i < 16; ++i) - dst_banked[i] = src_banked[i]; - pt->b0 = ms->pmsa_br0; - sw->b1 = ms->pmsa_br1; - - /* construct the NaT bits for the pt-regs structure: */ -# define PUT_NAT_BIT(dst, addr) \ - do { \ - bit = nat_bits & 1; nat_bits >>= 1; \ - shift = ((unsigned long) addr >> 3) & 0x3f; \ - dst = ((dst) & ~(1UL << shift)) | (bit << shift); \ - } while (0) - - /* Rotate the saved NaT bits such that bit 0 corresponds to pmsa_gr[0]: */ - shift = ((unsigned long) &ms->pmsa_gr[0] >> 3) & 0x3f; - nat_bits = (ms->pmsa_nat_bits >> shift) | (ms->pmsa_nat_bits << (64 - shift)); - - PUT_NAT_BIT(sw->caller_unat, &pt->r1); - PUT_NAT_BIT(sw->caller_unat, &pt->r2); - PUT_NAT_BIT(sw->caller_unat, &pt->r3); - PUT_NAT_BIT(sw->ar_unat, &sw->r4); - PUT_NAT_BIT(sw->ar_unat, &sw->r5); - PUT_NAT_BIT(sw->ar_unat, &sw->r6); - PUT_NAT_BIT(sw->ar_unat, &sw->r7); - PUT_NAT_BIT(sw->caller_unat, &pt->r8); PUT_NAT_BIT(sw->caller_unat, &pt->r9); - PUT_NAT_BIT(sw->caller_unat, &pt->r10); PUT_NAT_BIT(sw->caller_unat, &pt->r11); - PUT_NAT_BIT(sw->caller_unat, &pt->r12); PUT_NAT_BIT(sw->caller_unat, &pt->r13); - PUT_NAT_BIT(sw->caller_unat, &pt->r14); PUT_NAT_BIT(sw->caller_unat, &pt->r15); - nat_bits >>= 16; /* skip over bank0 NaT bits */ - PUT_NAT_BIT(sw->caller_unat, &pt->r16); PUT_NAT_BIT(sw->caller_unat, &pt->r17); - PUT_NAT_BIT(sw->caller_unat, &pt->r18); PUT_NAT_BIT(sw->caller_unat, &pt->r19); - PUT_NAT_BIT(sw->caller_unat, &pt->r20); PUT_NAT_BIT(sw->caller_unat, &pt->r21); - PUT_NAT_BIT(sw->caller_unat, &pt->r22); PUT_NAT_BIT(sw->caller_unat, &pt->r23); - PUT_NAT_BIT(sw->caller_unat, &pt->r24); PUT_NAT_BIT(sw->caller_unat, &pt->r25); - PUT_NAT_BIT(sw->caller_unat, &pt->r26); PUT_NAT_BIT(sw->caller_unat, &pt->r27); - PUT_NAT_BIT(sw->caller_unat, &pt->r28); PUT_NAT_BIT(sw->caller_unat, &pt->r29); - PUT_NAT_BIT(sw->caller_unat, &pt->r30); PUT_NAT_BIT(sw->caller_unat, &pt->r31); -} - -static void -init_handler_platform (pal_min_state_area_t *ms, - struct pt_regs *pt, struct switch_stack *sw) -{ - struct unw_frame_info info; - - /* if a kernel debugger is available call it here else just dump the registers */ - - /* - * Wait for a bit. On some machines (e.g., HP's zx2000 and zx6000, INIT can be - * generated via the BMC's command-line interface, but since the console is on the - * same serial line, the user will need some time to switch out of the BMC before - * the dump begins. - */ - printk("Delaying for 5 seconds...\n"); - udelay(5*1000000); - show_min_state(ms); - - printk("Backtrace of current task (pid %d, %s)\n", current->pid, current->comm); - fetch_min_state(ms, pt, sw); - unw_init_from_interruption(&info, current, pt, sw); - ia64_do_show_stack(&info, NULL); - -#ifdef CONFIG_SMP - /* read_trylock() would be handy... */ - if (!tasklist_lock.write_lock) - read_lock(&tasklist_lock); -#endif - { - struct task_struct *g, *t; - do_each_thread (g, t) { - if (t == current) - continue; - - printk("\nBacktrace of pid %d (%s)\n", t->pid, t->comm); - show_stack(t, NULL); - } while_each_thread (g, t); - } -#ifdef CONFIG_SMP - if (!tasklist_lock.write_lock) - read_unlock(&tasklist_lock); -#endif - - printk("\nINIT dump complete. Please reboot now.\n"); - while (1); /* hang city if no debugger */ -} - #ifdef CONFIG_ACPI /* * ia64_mca_register_cpev @@ -657,42 +478,6 @@ ia64_mca_cmc_vector_enable_keventd(void *unused) } /* - * ia64_mca_wakeup_ipi_wait - * - * Wait for the inter-cpu interrupt to be sent by the - * monarch processor once it is done with handling the - * MCA. - * - * Inputs : None - * Outputs : None - */ -static void -ia64_mca_wakeup_ipi_wait(void) -{ - int irr_num = (IA64_MCA_WAKEUP_VECTOR >> 6); - int irr_bit = (IA64_MCA_WAKEUP_VECTOR & 0x3f); - u64 irr = 0; - - do { - switch(irr_num) { - case 0: - irr = ia64_getreg(_IA64_REG_CR_IRR0); - break; - case 1: - irr = ia64_getreg(_IA64_REG_CR_IRR1); - break; - case 2: - irr = ia64_getreg(_IA64_REG_CR_IRR2); - break; - case 3: - irr = ia64_getreg(_IA64_REG_CR_IRR3); - break; - } - cpu_relax(); - } while (!(irr & (1UL << irr_bit))) ; -} - -/* * ia64_mca_wakeup * * Send an inter-cpu interrupt to wake-up a particular cpu @@ -723,9 +508,7 @@ ia64_mca_wakeup_all(void) int cpu; /* Clear the Rendez checkin flag for all cpus */ - for(cpu = 0; cpu < NR_CPUS; cpu++) { - if (!cpu_online(cpu)) - continue; + for_each_online_cpu(cpu) { if (ia64_mc_info.imi_rendez_checkin[cpu] == IA64_MCA_RENDEZ_CHECKIN_DONE) ia64_mca_wakeup(cpu); } @@ -757,11 +540,9 @@ ia64_mca_rendez_int_handler(int rendez_irq, void *arg, struct pt_regs *ptregs) */ ia64_sal_mc_rendez(); - /* Wait for the wakeup IPI from the monarch - * This waiting is done by polling on the wakeup-interrupt - * vector bit in the processor's IRRs - */ - ia64_mca_wakeup_ipi_wait(); + /* Wait for the monarch cpu to exit. */ + while (monarch_cpu != -1) + cpu_relax(); /* spin until monarch leaves */ /* Enable all interrupts */ local_irq_restore(flags); @@ -789,53 +570,13 @@ ia64_mca_wakeup_int_handler(int wakeup_irq, void *arg, struct pt_regs *ptregs) return IRQ_HANDLED; } -/* - * ia64_return_to_sal_check - * - * This is function called before going back from the OS_MCA handler - * to the OS_MCA dispatch code which finally takes the control back - * to the SAL. - * The main purpose of this routine is to setup the OS_MCA to SAL - * return state which can be used by the OS_MCA dispatch code - * just before going back to SAL. - * - * Inputs : None - * Outputs : None - */ - -static void -ia64_return_to_sal_check(int recover) -{ - - /* Copy over some relevant stuff from the sal_to_os_mca_handoff - * so that it can be used at the time of os_mca_to_sal_handoff - */ - ia64_os_to_sal_handoff_state.imots_sal_gp = - ia64_sal_to_os_handoff_state.imsto_sal_gp; - - ia64_os_to_sal_handoff_state.imots_sal_check_ra = - ia64_sal_to_os_handoff_state.imsto_sal_check_ra; - - if (recover) - ia64_os_to_sal_handoff_state.imots_os_status = IA64_MCA_CORRECTED; - else - ia64_os_to_sal_handoff_state.imots_os_status = IA64_MCA_COLD_BOOT; - - /* Default = tell SAL to return to same context */ - ia64_os_to_sal_handoff_state.imots_context = IA64_MCA_SAME_CONTEXT; - - ia64_os_to_sal_handoff_state.imots_new_min_state = - (u64 *)ia64_sal_to_os_handoff_state.pal_min_state; - -} - /* Function pointer for extra MCA recovery */ int (*ia64_mca_ucmc_extension) - (void*,ia64_mca_sal_to_os_state_t*,ia64_mca_os_to_sal_state_t*) + (void*,struct ia64_sal_os_state*) = NULL; int -ia64_reg_MCA_extension(void *fn) +ia64_reg_MCA_extension(int (*fn)(void *, struct ia64_sal_os_state *)) { if (ia64_mca_ucmc_extension) return 1; @@ -854,8 +595,321 @@ ia64_unreg_MCA_extension(void) EXPORT_SYMBOL(ia64_reg_MCA_extension); EXPORT_SYMBOL(ia64_unreg_MCA_extension); + +static inline void +copy_reg(const u64 *fr, u64 fnat, u64 *tr, u64 *tnat) +{ + u64 fslot, tslot, nat; + *tr = *fr; + fslot = ((unsigned long)fr >> 3) & 63; + tslot = ((unsigned long)tr >> 3) & 63; + *tnat &= ~(1UL << tslot); + nat = (fnat >> fslot) & 1; + *tnat |= (nat << tslot); +} + +/* On entry to this routine, we are running on the per cpu stack, see + * mca_asm.h. The original stack has not been touched by this event. Some of + * the original stack's registers will be in the RBS on this stack. This stack + * also contains a partial pt_regs and switch_stack, the rest of the data is in + * PAL minstate. + * + * The first thing to do is modify the original stack to look like a blocked + * task so we can run backtrace on the original task. Also mark the per cpu + * stack as current to ensure that we use the correct task state, it also means + * that we can do backtrace on the MCA/INIT handler code itself. + */ + +static task_t * +ia64_mca_modify_original_stack(struct pt_regs *regs, + const struct switch_stack *sw, + struct ia64_sal_os_state *sos, + const char *type) +{ + char *p, comm[sizeof(current->comm)]; + ia64_va va; + extern char ia64_leave_kernel[]; /* Need asm address, not function descriptor */ + const pal_min_state_area_t *ms = sos->pal_min_state; + task_t *previous_current; + struct pt_regs *old_regs; + struct switch_stack *old_sw; + unsigned size = sizeof(struct pt_regs) + + sizeof(struct switch_stack) + 16; + u64 *old_bspstore, *old_bsp; + u64 *new_bspstore, *new_bsp; + u64 old_unat, old_rnat, new_rnat, nat; + u64 slots, loadrs = regs->loadrs; + u64 r12 = ms->pmsa_gr[12-1], r13 = ms->pmsa_gr[13-1]; + u64 ar_bspstore = regs->ar_bspstore; + u64 ar_bsp = regs->ar_bspstore + (loadrs >> 16); + const u64 *bank; + const char *msg; + int cpu = smp_processor_id(); + + previous_current = curr_task(cpu); + set_curr_task(cpu, current); + if ((p = strchr(current->comm, ' '))) + *p = '\0'; + + /* Best effort attempt to cope with MCA/INIT delivered while in + * physical mode. + */ + regs->cr_ipsr = ms->pmsa_ipsr; + if (ia64_psr(regs)->dt == 0) { + va.l = r12; + if (va.f.reg == 0) { + va.f.reg = 7; + r12 = va.l; + } + va.l = r13; + if (va.f.reg == 0) { + va.f.reg = 7; + r13 = va.l; + } + } + if (ia64_psr(regs)->rt == 0) { + va.l = ar_bspstore; + if (va.f.reg == 0) { + va.f.reg = 7; + ar_bspstore = va.l; + } + va.l = ar_bsp; + if (va.f.reg == 0) { + va.f.reg = 7; + ar_bsp = va.l; + } + } + + /* mca_asm.S ia64_old_stack() cannot assume that the dirty registers + * have been copied to the old stack, the old stack may fail the + * validation tests below. So ia64_old_stack() must restore the dirty + * registers from the new stack. The old and new bspstore probably + * have different alignments, so loadrs calculated on the old bsp + * cannot be used to restore from the new bsp. Calculate a suitable + * loadrs for the new stack and save it in the new pt_regs, where + * ia64_old_stack() can get it. + */ + old_bspstore = (u64 *)ar_bspstore; + old_bsp = (u64 *)ar_bsp; + slots = ia64_rse_num_regs(old_bspstore, old_bsp); + new_bspstore = (u64 *)((u64)current + IA64_RBS_OFFSET); + new_bsp = ia64_rse_skip_regs(new_bspstore, slots); + regs->loadrs = (new_bsp - new_bspstore) * 8 << 16; + + /* Verify the previous stack state before we change it */ + if (user_mode(regs)) { + msg = "occurred in user space"; + goto no_mod; + } + if (r13 != sos->prev_IA64_KR_CURRENT) { + msg = "inconsistent previous current and r13"; + goto no_mod; + } + if ((r12 - r13) >= KERNEL_STACK_SIZE) { + msg = "inconsistent r12 and r13"; + goto no_mod; + } + if ((ar_bspstore - r13) >= KERNEL_STACK_SIZE) { + msg = "inconsistent ar.bspstore and r13"; + goto no_mod; + } + va.p = old_bspstore; + if (va.f.reg < 5) { + msg = "old_bspstore is in the wrong region"; + goto no_mod; + } + if ((ar_bsp - r13) >= KERNEL_STACK_SIZE) { + msg = "inconsistent ar.bsp and r13"; + goto no_mod; + } + size += (ia64_rse_skip_regs(old_bspstore, slots) - old_bspstore) * 8; + if (ar_bspstore + size > r12) { + msg = "no room for blocked state"; + goto no_mod; + } + + /* Change the comm field on the MCA/INT task to include the pid that + * was interrupted, it makes for easier debugging. If that pid was 0 + * (swapper or nested MCA/INIT) then use the start of the previous comm + * field suffixed with its cpu. + */ + if (previous_current->pid) + snprintf(comm, sizeof(comm), "%s %d", + current->comm, previous_current->pid); + else { + int l; + if ((p = strchr(previous_current->comm, ' '))) + l = p - previous_current->comm; + else + l = strlen(previous_current->comm); + snprintf(comm, sizeof(comm), "%s %*s %d", + current->comm, l, previous_current->comm, + previous_current->thread_info->cpu); + } + memcpy(current->comm, comm, sizeof(current->comm)); + + /* Make the original task look blocked. First stack a struct pt_regs, + * describing the state at the time of interrupt. mca_asm.S built a + * partial pt_regs, copy it and fill in the blanks using minstate. + */ + p = (char *)r12 - sizeof(*regs); + old_regs = (struct pt_regs *)p; + memcpy(old_regs, regs, sizeof(*regs)); + /* If ipsr.ic then use pmsa_{iip,ipsr,ifs}, else use + * pmsa_{xip,xpsr,xfs} + */ + if (ia64_psr(regs)->ic) { + old_regs->cr_iip = ms->pmsa_iip; + old_regs->cr_ipsr = ms->pmsa_ipsr; + old_regs->cr_ifs = ms->pmsa_ifs; + } else { + old_regs->cr_iip = ms->pmsa_xip; + old_regs->cr_ipsr = ms->pmsa_xpsr; + old_regs->cr_ifs = ms->pmsa_xfs; + } + old_regs->pr = ms->pmsa_pr; + old_regs->b0 = ms->pmsa_br0; + old_regs->loadrs = loadrs; + old_regs->ar_rsc = ms->pmsa_rsc; + old_unat = old_regs->ar_unat; + copy_reg(&ms->pmsa_gr[1-1], ms->pmsa_nat_bits, &old_regs->r1, &old_unat); + copy_reg(&ms->pmsa_gr[2-1], ms->pmsa_nat_bits, &old_regs->r2, &old_unat); + copy_reg(&ms->pmsa_gr[3-1], ms->pmsa_nat_bits, &old_regs->r3, &old_unat); + copy_reg(&ms->pmsa_gr[8-1], ms->pmsa_nat_bits, &old_regs->r8, &old_unat); + copy_reg(&ms->pmsa_gr[9-1], ms->pmsa_nat_bits, &old_regs->r9, &old_unat); + copy_reg(&ms->pmsa_gr[10-1], ms->pmsa_nat_bits, &old_regs->r10, &old_unat); + copy_reg(&ms->pmsa_gr[11-1], ms->pmsa_nat_bits, &old_regs->r11, &old_unat); + copy_reg(&ms->pmsa_gr[12-1], ms->pmsa_nat_bits, &old_regs->r12, &old_unat); + copy_reg(&ms->pmsa_gr[13-1], ms->pmsa_nat_bits, &old_regs->r13, &old_unat); + copy_reg(&ms->pmsa_gr[14-1], ms->pmsa_nat_bits, &old_regs->r14, &old_unat); + copy_reg(&ms->pmsa_gr[15-1], ms->pmsa_nat_bits, &old_regs->r15, &old_unat); + if (ia64_psr(old_regs)->bn) + bank = ms->pmsa_bank1_gr; + else + bank = ms->pmsa_bank0_gr; + copy_reg(&bank[16-16], ms->pmsa_nat_bits, &old_regs->r16, &old_unat); + copy_reg(&bank[17-16], ms->pmsa_nat_bits, &old_regs->r17, &old_unat); + copy_reg(&bank[18-16], ms->pmsa_nat_bits, &old_regs->r18, &old_unat); + copy_reg(&bank[19-16], ms->pmsa_nat_bits, &old_regs->r19, &old_unat); + copy_reg(&bank[20-16], ms->pmsa_nat_bits, &old_regs->r20, &old_unat); + copy_reg(&bank[21-16], ms->pmsa_nat_bits, &old_regs->r21, &old_unat); + copy_reg(&bank[22-16], ms->pmsa_nat_bits, &old_regs->r22, &old_unat); + copy_reg(&bank[23-16], ms->pmsa_nat_bits, &old_regs->r23, &old_unat); + copy_reg(&bank[24-16], ms->pmsa_nat_bits, &old_regs->r24, &old_unat); + copy_reg(&bank[25-16], ms->pmsa_nat_bits, &old_regs->r25, &old_unat); + copy_reg(&bank[26-16], ms->pmsa_nat_bits, &old_regs->r26, &old_unat); + copy_reg(&bank[27-16], ms->pmsa_nat_bits, &old_regs->r27, &old_unat); + copy_reg(&bank[28-16], ms->pmsa_nat_bits, &old_regs->r28, &old_unat); + copy_reg(&bank[29-16], ms->pmsa_nat_bits, &old_regs->r29, &old_unat); + copy_reg(&bank[30-16], ms->pmsa_nat_bits, &old_regs->r30, &old_unat); + copy_reg(&bank[31-16], ms->pmsa_nat_bits, &old_regs->r31, &old_unat); + + /* Next stack a struct switch_stack. mca_asm.S built a partial + * switch_stack, copy it and fill in the blanks using pt_regs and + * minstate. + * + * In the synthesized switch_stack, b0 points to ia64_leave_kernel, + * ar.pfs is set to 0. + * + * unwind.c::unw_unwind() does special processing for interrupt frames. + * It checks if the PRED_NON_SYSCALL predicate is set, if the predicate + * is clear then unw_unwind() does _not_ adjust bsp over pt_regs. Not + * that this is documented, of course. Set PRED_NON_SYSCALL in the + * switch_stack on the original stack so it will unwind correctly when + * unwind.c reads pt_regs. + * + * thread.ksp is updated to point to the synthesized switch_stack. + */ + p -= sizeof(struct switch_stack); + old_sw = (struct switch_stack *)p; + memcpy(old_sw, sw, sizeof(*sw)); + old_sw->caller_unat = old_unat; + old_sw->ar_fpsr = old_regs->ar_fpsr; + copy_reg(&ms->pmsa_gr[4-1], ms->pmsa_nat_bits, &old_sw->r4, &old_unat); + copy_reg(&ms->pmsa_gr[5-1], ms->pmsa_nat_bits, &old_sw->r5, &old_unat); + copy_reg(&ms->pmsa_gr[6-1], ms->pmsa_nat_bits, &old_sw->r6, &old_unat); + copy_reg(&ms->pmsa_gr[7-1], ms->pmsa_nat_bits, &old_sw->r7, &old_unat); + old_sw->b0 = (u64)ia64_leave_kernel; + old_sw->b1 = ms->pmsa_br1; + old_sw->ar_pfs = 0; + old_sw->ar_unat = old_unat; + old_sw->pr = old_regs->pr | (1UL << PRED_NON_SYSCALL); + previous_current->thread.ksp = (u64)p - 16; + + /* Finally copy the original stack's registers back to its RBS. + * Registers from ar.bspstore through ar.bsp at the time of the event + * are in the current RBS, copy them back to the original stack. The + * copy must be done register by register because the original bspstore + * and the current one have different alignments, so the saved RNAT + * data occurs at different places. + * + * mca_asm does cover, so the old_bsp already includes all registers at + * the time of MCA/INIT. It also does flushrs, so all registers before + * this function have been written to backing store on the MCA/INIT + * stack. + */ + new_rnat = ia64_get_rnat(ia64_rse_rnat_addr(new_bspstore)); + old_rnat = regs->ar_rnat; + while (slots--) { + if (ia64_rse_is_rnat_slot(new_bspstore)) { + new_rnat = ia64_get_rnat(new_bspstore++); + } + if (ia64_rse_is_rnat_slot(old_bspstore)) { + *old_bspstore++ = old_rnat; + old_rnat = 0; + } + nat = (new_rnat >> ia64_rse_slot_num(new_bspstore)) & 1UL; + old_rnat &= ~(1UL << ia64_rse_slot_num(old_bspstore)); + old_rnat |= (nat << ia64_rse_slot_num(old_bspstore)); + *old_bspstore++ = *new_bspstore++; + } + old_sw->ar_bspstore = (unsigned long)old_bspstore; + old_sw->ar_rnat = old_rnat; + + sos->prev_task = previous_current; + return previous_current; + +no_mod: + printk(KERN_INFO "cpu %d, %s %s, original stack not modified\n", + smp_processor_id(), type, msg); + return previous_current; +} + +/* The monarch/slave interaction is based on monarch_cpu and requires that all + * slaves have entered rendezvous before the monarch leaves. If any cpu has + * not entered rendezvous yet then wait a bit. The assumption is that any + * slave that has not rendezvoused after a reasonable time is never going to do + * so. In this context, slave includes cpus that respond to the MCA rendezvous + * interrupt, as well as cpus that receive the INIT slave event. + */ + +static void +ia64_wait_for_slaves(int monarch) +{ + int c, wait = 0; + for_each_online_cpu(c) { + if (c == monarch) + continue; + if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE) { + udelay(1000); /* short wait first */ + wait = 1; + break; + } + } + if (!wait) + return; + for_each_online_cpu(c) { + if (c == monarch) + continue; + if (ia64_mc_info.imi_rendez_checkin[c] == IA64_MCA_RENDEZ_CHECKIN_NOTDONE) { + udelay(5*1000000); /* wait 5 seconds for slaves (arbitrary) */ + break; + } + } +} + /* - * ia64_mca_ucmc_handler + * ia64_mca_handler * * This is uncorrectable machine check handler called from OS_MCA * dispatch code which is in turn called from SAL_CHECK(). @@ -866,16 +920,28 @@ EXPORT_SYMBOL(ia64_unreg_MCA_extension); * further MCA logging is enabled by clearing logs. * Monarch also has the duty of sending wakeup-IPIs to pull the * slave processors out of rendezvous spinloop. - * - * Inputs : None - * Outputs : None */ void -ia64_mca_ucmc_handler(void) +ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw, + struct ia64_sal_os_state *sos) { pal_processor_state_info_t *psp = (pal_processor_state_info_t *) - &ia64_sal_to_os_handoff_state.proc_state_param; - int recover; + &sos->proc_state_param; + int recover, cpu = smp_processor_id(); + task_t *previous_current; + + oops_in_progress = 1; /* FIXME: make printk NMI/MCA/INIT safe */ + previous_current = ia64_mca_modify_original_stack(regs, sw, sos, "MCA"); + monarch_cpu = cpu; + ia64_wait_for_slaves(cpu); + + /* Wakeup all the processors which are spinning in the rendezvous loop. + * They will leave SAL, then spin in the OS with interrupts disabled + * until this monarch cpu leaves the MCA handler. That gets control + * back to the OS so we can backtrace the other cpus, backtrace when + * spinning in SAL does not work. + */ + ia64_mca_wakeup_all(); /* Get the MCA error record and log it */ ia64_mca_log_sal_error_record(SAL_INFO_TYPE_MCA); @@ -883,25 +949,20 @@ ia64_mca_ucmc_handler(void) /* TLB error is only exist in this SAL error record */ recover = (psp->tc && !(psp->cc || psp->bc || psp->rc || psp->uc)) /* other error recovery */ - || (ia64_mca_ucmc_extension + || (ia64_mca_ucmc_extension && ia64_mca_ucmc_extension( IA64_LOG_CURR_BUFFER(SAL_INFO_TYPE_MCA), - &ia64_sal_to_os_handoff_state, - &ia64_os_to_sal_handoff_state)); + sos)); if (recover) { sal_log_record_header_t *rh = IA64_LOG_CURR_BUFFER(SAL_INFO_TYPE_MCA); rh->severity = sal_log_severity_corrected; ia64_sal_clear_state_info(SAL_INFO_TYPE_MCA); + sos->os_status = IA64_MCA_CORRECTED; } - /* - * Wakeup all the processors which are spinning in the rendezvous - * loop. - */ - ia64_mca_wakeup_all(); - /* Return to SAL */ - ia64_return_to_sal_check(recover); + set_curr_task(cpu, previous_current); + monarch_cpu = -1; } static DECLARE_WORK(cmc_disable_work, ia64_mca_cmc_vector_disable_keventd, NULL); @@ -953,6 +1014,11 @@ ia64_mca_cmc_int_handler(int cmc_irq, void *arg, struct pt_regs *ptregs) cmc_polling_enabled = 1; spin_unlock(&cmc_history_lock); + /* If we're being hit with CMC interrupts, we won't + * ever execute the schedule_work() below. Need to + * disable CMC interrupts on this processor now. + */ + ia64_mca_cmc_vector_disable(NULL); schedule_work(&cmc_disable_work); /* @@ -1125,34 +1191,114 @@ ia64_mca_cpe_poll (unsigned long dummy) /* * C portion of the OS INIT handler * - * Called from ia64_monarch_init_handler - * - * Inputs: pointer to pt_regs where processor info was saved. + * Called from ia64_os_init_dispatch * - * Returns: - * 0 if SAL must warm boot the System - * 1 if SAL must return to interrupted context using PAL_MC_RESUME + * Inputs: pointer to pt_regs where processor info was saved. SAL/OS state for + * this event. This code is used for both monarch and slave INIT events, see + * sos->monarch. * + * All INIT events switch to the INIT stack and change the previous process to + * blocked status. If one of the INIT events is the monarch then we are + * probably processing the nmi button/command. Use the monarch cpu to dump all + * the processes. The slave INIT events all spin until the monarch cpu + * returns. We can also get INIT slave events for MCA, in which case the MCA + * process is the monarch. */ + void -ia64_init_handler (struct pt_regs *pt, struct switch_stack *sw) +ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw, + struct ia64_sal_os_state *sos) { - pal_min_state_area_t *ms; + static atomic_t slaves; + static atomic_t monarchs; + task_t *previous_current; + int cpu = smp_processor_id(), c; + struct task_struct *g, *t; - oops_in_progress = 1; /* avoid deadlock in printk, but it makes recovery dodgy */ + oops_in_progress = 1; /* FIXME: make printk NMI/MCA/INIT safe */ console_loglevel = 15; /* make sure printks make it to console */ - printk(KERN_INFO "Entered OS INIT handler. PSP=%lx\n", - ia64_sal_to_os_handoff_state.proc_state_param); + printk(KERN_INFO "Entered OS INIT handler. PSP=%lx cpu=%d monarch=%ld\n", + sos->proc_state_param, cpu, sos->monarch); + salinfo_log_wakeup(SAL_INFO_TYPE_INIT, NULL, 0, 0); - /* - * Address of minstate area provided by PAL is physical, - * uncacheable (bit 63 set). Convert to Linux virtual - * address in region 6. + previous_current = ia64_mca_modify_original_stack(regs, sw, sos, "INIT"); + sos->os_status = IA64_INIT_RESUME; + + /* FIXME: Workaround for broken proms that drive all INIT events as + * slaves. The last slave that enters is promoted to be a monarch. + * Remove this code in September 2006, that gives platforms a year to + * fix their proms and get their customers updated. */ - ms = (pal_min_state_area_t *)(ia64_sal_to_os_handoff_state.pal_min_state | (6ul<<61)); + if (!sos->monarch && atomic_add_return(1, &slaves) == num_online_cpus()) { + printk(KERN_WARNING "%s: Promoting cpu %d to monarch.\n", + __FUNCTION__, cpu); + atomic_dec(&slaves); + sos->monarch = 1; + } + + /* FIXME: Workaround for broken proms that drive all INIT events as + * monarchs. Second and subsequent monarchs are demoted to slaves. + * Remove this code in September 2006, that gives platforms a year to + * fix their proms and get their customers updated. + */ + if (sos->monarch && atomic_add_return(1, &monarchs) > 1) { + printk(KERN_WARNING "%s: Demoting cpu %d to slave.\n", + __FUNCTION__, cpu); + atomic_dec(&monarchs); + sos->monarch = 0; + } - init_handler_platform(ms, pt, sw); /* call platform specific routines */ + if (!sos->monarch) { + ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_INIT; + while (monarch_cpu == -1) + cpu_relax(); /* spin until monarch enters */ + while (monarch_cpu != -1) + cpu_relax(); /* spin until monarch leaves */ + printk("Slave on cpu %d returning to normal service.\n", cpu); + set_curr_task(cpu, previous_current); + ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE; + atomic_dec(&slaves); + return; + } + + monarch_cpu = cpu; + + /* + * Wait for a bit. On some machines (e.g., HP's zx2000 and zx6000, INIT can be + * generated via the BMC's command-line interface, but since the console is on the + * same serial line, the user will need some time to switch out of the BMC before + * the dump begins. + */ + printk("Delaying for 5 seconds...\n"); + udelay(5*1000000); + ia64_wait_for_slaves(cpu); + printk(KERN_ERR "Processes interrupted by INIT -"); + for_each_online_cpu(c) { + struct ia64_sal_os_state *s; + t = __va(__per_cpu_mca[c] + IA64_MCA_CPU_INIT_STACK_OFFSET); + s = (struct ia64_sal_os_state *)((char *)t + MCA_SOS_OFFSET); + g = s->prev_task; + if (g) { + if (g->pid) + printk(" %d", g->pid); + else + printk(" %d (cpu %d task 0x%p)", g->pid, task_cpu(g), g); + } + } + printk("\n\n"); + if (read_trylock(&tasklist_lock)) { + do_each_thread (g, t) { + printk("\nBacktrace of pid %d (%s)\n", t->pid, t->comm); + show_stack(t, NULL); + } while_each_thread (g, t); + read_unlock(&tasklist_lock); + } + printk("\nINIT dump complete. Monarch on cpu %d returning to normal service.\n", cpu); + atomic_dec(&monarchs); + set_curr_task(cpu, previous_current); + monarch_cpu = -1; + return; } static int __init @@ -1202,6 +1348,34 @@ static struct irqaction mca_cpep_irqaction = { }; #endif /* CONFIG_ACPI */ +/* Minimal format of the MCA/INIT stacks. The pseudo processes that run on + * these stacks can never sleep, they cannot return from the kernel to user + * space, they do not appear in a normal ps listing. So there is no need to + * format most of the fields. + */ + +static void +format_mca_init_stack(void *mca_data, unsigned long offset, + const char *type, int cpu) +{ + struct task_struct *p = (struct task_struct *)((char *)mca_data + offset); + struct thread_info *ti; + memset(p, 0, KERNEL_STACK_SIZE); + ti = (struct thread_info *)((char *)p + IA64_TASK_SIZE); + ti->flags = _TIF_MCA_INIT; + ti->preempt_count = 1; + ti->task = p; + ti->cpu = cpu; + p->thread_info = ti; + p->state = TASK_UNINTERRUPTIBLE; + __set_bit(cpu, &p->cpus_allowed); + INIT_LIST_HEAD(&p->tasks); + p->parent = p->real_parent = p->group_leader = p; + INIT_LIST_HEAD(&p->children); + INIT_LIST_HEAD(&p->sibling); + strncpy(p->comm, type, sizeof(p->comm)-1); +} + /* Do per-CPU MCA-related initialization. */ void __devinit @@ -1214,19 +1388,28 @@ ia64_mca_cpu_init(void *cpu_data) int cpu; mca_data = alloc_bootmem(sizeof(struct ia64_mca_cpu) - * NR_CPUS); + * NR_CPUS + KERNEL_STACK_SIZE); + mca_data = (void *)(((unsigned long)mca_data + + KERNEL_STACK_SIZE - 1) & + (-KERNEL_STACK_SIZE)); for (cpu = 0; cpu < NR_CPUS; cpu++) { + format_mca_init_stack(mca_data, + offsetof(struct ia64_mca_cpu, mca_stack), + "MCA", cpu); + format_mca_init_stack(mca_data, + offsetof(struct ia64_mca_cpu, init_stack), + "INIT", cpu); __per_cpu_mca[cpu] = __pa(mca_data); mca_data += sizeof(struct ia64_mca_cpu); } } - /* - * The MCA info structure was allocated earlier and its - * physical address saved in __per_cpu_mca[cpu]. Copy that - * address * to ia64_mca_data so we can access it as a per-CPU - * variable. - */ + /* + * The MCA info structure was allocated earlier and its + * physical address saved in __per_cpu_mca[cpu]. Copy that + * address * to ia64_mca_data so we can access it as a per-CPU + * variable. + */ __get_cpu_var(ia64_mca_data) = __per_cpu_mca[smp_processor_id()]; /* @@ -1236,11 +1419,11 @@ ia64_mca_cpu_init(void *cpu_data) __get_cpu_var(ia64_mca_per_cpu_pte) = pte_val(mk_pte_phys(__pa(cpu_data), PAGE_KERNEL)); - /* - * Also, stash away a copy of the PAL address and the PTE - * needed to map it. - */ - pal_vaddr = efi_get_pal_addr(); + /* + * Also, stash away a copy of the PAL address and the PTE + * needed to map it. + */ + pal_vaddr = efi_get_pal_addr(); if (!pal_vaddr) return; __get_cpu_var(ia64_mca_pal_base) = @@ -1272,8 +1455,8 @@ ia64_mca_cpu_init(void *cpu_data) void __init ia64_mca_init(void) { - ia64_fptr_t *mon_init_ptr = (ia64_fptr_t *)ia64_monarch_init_handler; - ia64_fptr_t *slave_init_ptr = (ia64_fptr_t *)ia64_slave_init_handler; + ia64_fptr_t *init_hldlr_ptr_monarch = (ia64_fptr_t *)ia64_os_init_dispatch_monarch; + ia64_fptr_t *init_hldlr_ptr_slave = (ia64_fptr_t *)ia64_os_init_dispatch_slave; ia64_fptr_t *mca_hldlr_ptr = (ia64_fptr_t *)ia64_os_mca_dispatch; int i; s64 rc; @@ -1351,9 +1534,9 @@ ia64_mca_init(void) * XXX - disable SAL checksum by setting size to 0, should be * size of the actual init handler in mca_asm.S. */ - ia64_mc_info.imi_monarch_init_handler = ia64_tpa(mon_init_ptr->fp); + ia64_mc_info.imi_monarch_init_handler = ia64_tpa(init_hldlr_ptr_monarch->fp); ia64_mc_info.imi_monarch_init_handler_size = 0; - ia64_mc_info.imi_slave_init_handler = ia64_tpa(slave_init_ptr->fp); + ia64_mc_info.imi_slave_init_handler = ia64_tpa(init_hldlr_ptr_slave->fp); ia64_mc_info.imi_slave_init_handler_size = 0; IA64_MCA_DEBUG("%s: OS INIT handler at %lx\n", __FUNCTION__, diff --git a/arch/ia64/kernel/mca_asm.S b/arch/ia64/kernel/mca_asm.S index ef3fd72..db32fc1 100644 --- a/arch/ia64/kernel/mca_asm.S +++ b/arch/ia64/kernel/mca_asm.S @@ -16,6 +16,9 @@ // 04/11/12 Russ Anderson <rja@sgi.com> // Added per cpu MCA/INIT stack save areas. // +// 12/08/05 Keith Owens <kaos@sgi.com> +// Use per cpu MCA/INIT stacks for all data. +// #include <linux/config.h> #include <linux/threads.h> @@ -25,96 +28,23 @@ #include <asm/mca_asm.h> #include <asm/mca.h> -/* - * When we get a machine check, the kernel stack pointer is no longer - * valid, so we need to set a new stack pointer. - */ -#define MINSTATE_PHYS /* Make sure stack access is physical for MINSTATE */ - -/* - * Needed for return context to SAL - */ -#define IA64_MCA_SAME_CONTEXT 0 -#define IA64_MCA_COLD_BOOT -2 - -#include "minstate.h" - -/* - * SAL_TO_OS_MCA_HANDOFF_STATE (SAL 3.0 spec) - * 1. GR1 = OS GP - * 2. GR8 = PAL_PROC physical address - * 3. GR9 = SAL_PROC physical address - * 4. GR10 = SAL GP (physical) - * 5. GR11 = Rendez state - * 6. GR12 = Return address to location within SAL_CHECK - */ -#define SAL_TO_OS_MCA_HANDOFF_STATE_SAVE(_tmp) \ - LOAD_PHYSICAL(p0, _tmp, ia64_sal_to_os_handoff_state);; \ - st8 [_tmp]=r1,0x08;; \ - st8 [_tmp]=r8,0x08;; \ - st8 [_tmp]=r9,0x08;; \ - st8 [_tmp]=r10,0x08;; \ - st8 [_tmp]=r11,0x08;; \ - st8 [_tmp]=r12,0x08;; \ - st8 [_tmp]=r17,0x08;; \ - st8 [_tmp]=r18,0x08 - -/* - * OS_MCA_TO_SAL_HANDOFF_STATE (SAL 3.0 spec) - * (p6) is executed if we never entered virtual mode (TLB error) - * (p7) is executed if we entered virtual mode as expected (normal case) - * 1. GR8 = OS_MCA return status - * 2. GR9 = SAL GP (physical) - * 3. GR10 = 0/1 returning same/new context - * 4. GR22 = New min state save area pointer - * returns ptr to SAL rtn save loc in _tmp - */ -#define OS_MCA_TO_SAL_HANDOFF_STATE_RESTORE(_tmp) \ - movl _tmp=ia64_os_to_sal_handoff_state;; \ - DATA_VA_TO_PA(_tmp);; \ - ld8 r8=[_tmp],0x08;; \ - ld8 r9=[_tmp],0x08;; \ - ld8 r10=[_tmp],0x08;; \ - ld8 r22=[_tmp],0x08;; - // now _tmp is pointing to SAL rtn save location - -/* - * COLD_BOOT_HANDOFF_STATE() sets ia64_mca_os_to_sal_state - * imots_os_status=IA64_MCA_COLD_BOOT - * imots_sal_gp=SAL GP - * imots_context=IA64_MCA_SAME_CONTEXT - * imots_new_min_state=Min state save area pointer - * imots_sal_check_ra=Return address to location within SAL_CHECK - * - */ -#define COLD_BOOT_HANDOFF_STATE(sal_to_os_handoff,os_to_sal_handoff,tmp)\ - movl tmp=IA64_MCA_COLD_BOOT; \ - movl sal_to_os_handoff=__pa(ia64_sal_to_os_handoff_state); \ - movl os_to_sal_handoff=__pa(ia64_os_to_sal_handoff_state);; \ - st8 [os_to_sal_handoff]=tmp,8;; \ - ld8 tmp=[sal_to_os_handoff],48;; \ - st8 [os_to_sal_handoff]=tmp,8;; \ - movl tmp=IA64_MCA_SAME_CONTEXT;; \ - st8 [os_to_sal_handoff]=tmp,8;; \ - ld8 tmp=[sal_to_os_handoff],-8;; \ - st8 [os_to_sal_handoff]=tmp,8;; \ - ld8 tmp=[sal_to_os_handoff];; \ - st8 [os_to_sal_handoff]=tmp;; +#include "entry.h" #define GET_IA64_MCA_DATA(reg) \ GET_THIS_PADDR(reg, ia64_mca_data) \ ;; \ ld8 reg=[reg] - .global ia64_os_mca_dispatch - .global ia64_os_mca_dispatch_end - .global ia64_sal_to_os_handoff_state - .global ia64_os_to_sal_handoff_state .global ia64_do_tlb_purge + .global ia64_os_mca_dispatch + .global ia64_os_init_dispatch_monarch + .global ia64_os_init_dispatch_slave .text .align 16 +//StartMain//////////////////////////////////////////////////////////////////// + /* * Just the TLB purge part is moved to a separate function * so we can re-use the code for cpu hotplug code as well @@ -207,34 +137,31 @@ ia64_do_tlb_purge: br.sptk.many b1 ;; -ia64_os_mca_dispatch: +//EndMain////////////////////////////////////////////////////////////////////// + +//StartMain//////////////////////////////////////////////////////////////////// +ia64_os_mca_dispatch: // Serialize all MCA processing mov r3=1;; LOAD_PHYSICAL(p0,r2,ia64_mca_serialize);; ia64_os_mca_spin: - xchg8 r4=[r2],r3;; + xchg4 r4=[r2],r3;; cmp.ne p6,p0=r4,r0 (p6) br ia64_os_mca_spin - // Save the SAL to OS MCA handoff state as defined - // by SAL SPEC 3.0 - // NOTE : The order in which the state gets saved - // is dependent on the way the C-structure - // for ia64_mca_sal_to_os_state_t has been - // defined in include/asm/mca.h - SAL_TO_OS_MCA_HANDOFF_STATE_SAVE(r2) - ;; - - // LOG PROCESSOR STATE INFO FROM HERE ON.. -begin_os_mca_dump: - br ia64_os_mca_proc_state_dump;; - -ia64_os_mca_done_dump: + mov r3=IA64_MCA_CPU_MCA_STACK_OFFSET // use the MCA stack + LOAD_PHYSICAL(p0,r2,1f) // return address + mov r19=1 // All MCA events are treated as monarch (for now) + br.sptk ia64_state_save // save the state that is not in minstate +1: - LOAD_PHYSICAL(p0,r16,ia64_sal_to_os_handoff_state+56) + GET_IA64_MCA_DATA(r2) + // Using MCA stack, struct ia64_sal_os_state, variable proc_state_param + ;; + add r3=IA64_MCA_CPU_MCA_STACK_OFFSET+MCA_SOS_OFFSET+IA64_SAL_OS_STATE_PROC_STATE_PARAM_OFFSET, r2 ;; - ld8 r18=[r16] // Get processor state parameter on existing PALE_CHECK. + ld8 r18=[r3] // Get processor state parameter on existing PALE_CHECK. ;; tbit.nz p6,p7=r18,60 (p7) br.spnt done_tlb_purge_and_reload @@ -323,624 +250,849 @@ ia64_reload_tr: itr.d dtr[r20]=r16 ;; srlz.d - ;; - br.sptk.many done_tlb_purge_and_reload -err: - COLD_BOOT_HANDOFF_STATE(r20,r21,r22) - br.sptk.many ia64_os_mca_done_restore done_tlb_purge_and_reload: - // Setup new stack frame for OS_MCA handling - GET_IA64_MCA_DATA(r2) - ;; - add r3 = IA64_MCA_CPU_STACKFRAME_OFFSET, r2 - add r2 = IA64_MCA_CPU_RBSTORE_OFFSET, r2 - ;; - rse_switch_context(r6,r3,r2);; // RSC management in this new context + // switch to per cpu MCA stack + mov r3=IA64_MCA_CPU_MCA_STACK_OFFSET // use the MCA stack + LOAD_PHYSICAL(p0,r2,1f) // return address + br.sptk ia64_new_stack +1: + + // everything saved, now we can set the kernel registers + mov r3=IA64_MCA_CPU_MCA_STACK_OFFSET // use the MCA stack + LOAD_PHYSICAL(p0,r2,1f) // return address + br.sptk ia64_set_kernel_registers +1: + // This must be done in physical mode GET_IA64_MCA_DATA(r2) ;; - add r2 = IA64_MCA_CPU_STACK_OFFSET+IA64_MCA_STACK_SIZE-16, r2 - ;; - mov r12=r2 // establish new stack-pointer + mov r7=r2 // Enter virtual mode from physical mode VIRTUAL_MODE_ENTER(r2, r3, ia64_os_mca_virtual_begin, r4) -ia64_os_mca_virtual_begin: + + // This code returns to SAL via SOS r2, in general SAL has no unwind + // data. To get a clean termination when backtracing the C MCA/INIT + // handler, set a dummy return address of 0 in this routine. That + // requires that ia64_os_mca_virtual_begin be a global function. +ENTRY(ia64_os_mca_virtual_begin) + .prologue + .save rp,r0 + .body + + mov ar.rsc=3 // set eager mode for C handler + mov r2=r7 // see GET_IA64_MCA_DATA above + ;; // Call virtual mode handler - movl r2=ia64_mca_ucmc_handler;; - mov b6=r2;; - br.call.sptk.many b0=b6;; -.ret0: + alloc r14=ar.pfs,0,0,3,0 + ;; + DATA_PA_TO_VA(r2,r7) + ;; + add out0=IA64_MCA_CPU_MCA_STACK_OFFSET+MCA_PT_REGS_OFFSET, r2 + add out1=IA64_MCA_CPU_MCA_STACK_OFFSET+MCA_SWITCH_STACK_OFFSET, r2 + add out2=IA64_MCA_CPU_MCA_STACK_OFFSET+MCA_SOS_OFFSET, r2 + br.call.sptk.many b0=ia64_mca_handler + // Revert back to physical mode before going back to SAL PHYSICAL_MODE_ENTER(r2, r3, ia64_os_mca_virtual_end, r4) ia64_os_mca_virtual_end: - // restore the original stack frame here +END(ia64_os_mca_virtual_begin) + + // switch back to previous stack + alloc r14=ar.pfs,0,0,0,0 // remove the MCA handler frame + mov r3=IA64_MCA_CPU_MCA_STACK_OFFSET // use the MCA stack + LOAD_PHYSICAL(p0,r2,1f) // return address + br.sptk ia64_old_stack +1: + + mov r3=IA64_MCA_CPU_MCA_STACK_OFFSET // use the MCA stack + LOAD_PHYSICAL(p0,r2,1f) // return address + br.sptk ia64_state_restore // restore the SAL state +1: + + mov b0=r12 // SAL_CHECK return address + + // release lock + LOAD_PHYSICAL(p0,r3,ia64_mca_serialize);; + st4.rel [r3]=r0 + + br b0 + +//EndMain////////////////////////////////////////////////////////////////////// + +//StartMain//////////////////////////////////////////////////////////////////// + +// +// SAL to OS entry point for INIT on all processors. This has been defined for +// registration purposes with SAL as a part of ia64_mca_init. Monarch and +// slave INIT have identical processing, except for the value of the +// sos->monarch flag in r19. +// + +ia64_os_init_dispatch_monarch: + mov r19=1 // Bow, bow, ye lower middle classes! + br.sptk ia64_os_init_dispatch + +ia64_os_init_dispatch_slave: + mov r19=0 // <igor>yeth, mathter</igor> + +ia64_os_init_dispatch: + + mov r3=IA64_MCA_CPU_INIT_STACK_OFFSET // use the INIT stack + LOAD_PHYSICAL(p0,r2,1f) // return address + br.sptk ia64_state_save // save the state that is not in minstate +1: + + // switch to per cpu INIT stack + mov r3=IA64_MCA_CPU_INIT_STACK_OFFSET // use the INIT stack + LOAD_PHYSICAL(p0,r2,1f) // return address + br.sptk ia64_new_stack +1: + + // everything saved, now we can set the kernel registers + mov r3=IA64_MCA_CPU_INIT_STACK_OFFSET // use the INIT stack + LOAD_PHYSICAL(p0,r2,1f) // return address + br.sptk ia64_set_kernel_registers +1: + + // This must be done in physical mode GET_IA64_MCA_DATA(r2) ;; - add r2 = IA64_MCA_CPU_STACKFRAME_OFFSET, r2 - ;; - movl r4=IA64_PSR_MC + mov r7=r2 + + // Enter virtual mode from physical mode + VIRTUAL_MODE_ENTER(r2, r3, ia64_os_init_virtual_begin, r4) + + // This code returns to SAL via SOS r2, in general SAL has no unwind + // data. To get a clean termination when backtracing the C MCA/INIT + // handler, set a dummy return address of 0 in this routine. That + // requires that ia64_os_init_virtual_begin be a global function. +ENTRY(ia64_os_init_virtual_begin) + .prologue + .save rp,r0 + .body + + mov ar.rsc=3 // set eager mode for C handler + mov r2=r7 // see GET_IA64_MCA_DATA above ;; - rse_return_context(r4,r3,r2) // switch from interrupt context for RSE - // let us restore all the registers from our PSI structure - mov r8=gp + // Call virtual mode handler + alloc r14=ar.pfs,0,0,3,0 ;; -begin_os_mca_restore: - br ia64_os_mca_proc_state_restore;; + DATA_PA_TO_VA(r2,r7) + ;; + add out0=IA64_MCA_CPU_INIT_STACK_OFFSET+MCA_PT_REGS_OFFSET, r2 + add out1=IA64_MCA_CPU_INIT_STACK_OFFSET+MCA_SWITCH_STACK_OFFSET, r2 + add out2=IA64_MCA_CPU_INIT_STACK_OFFSET+MCA_SOS_OFFSET, r2 + br.call.sptk.many b0=ia64_init_handler -ia64_os_mca_done_restore: - OS_MCA_TO_SAL_HANDOFF_STATE_RESTORE(r2);; - // branch back to SALE_CHECK - ld8 r3=[r2];; - mov b0=r3;; // SAL_CHECK return address + // Revert back to physical mode before going back to SAL + PHYSICAL_MODE_ENTER(r2, r3, ia64_os_init_virtual_end, r4) +ia64_os_init_virtual_end: - // release lock - movl r3=ia64_mca_serialize;; - DATA_VA_TO_PA(r3);; - st8.rel [r3]=r0 +END(ia64_os_init_virtual_begin) + mov r3=IA64_MCA_CPU_INIT_STACK_OFFSET // use the INIT stack + LOAD_PHYSICAL(p0,r2,1f) // return address + br.sptk ia64_state_restore // restore the SAL state +1: + + // switch back to previous stack + alloc r14=ar.pfs,0,0,0,0 // remove the INIT handler frame + mov r3=IA64_MCA_CPU_INIT_STACK_OFFSET // use the INIT stack + LOAD_PHYSICAL(p0,r2,1f) // return address + br.sptk ia64_old_stack +1: + + mov b0=r12 // SAL_CHECK return address br b0 - ;; -ia64_os_mca_dispatch_end: + //EndMain////////////////////////////////////////////////////////////////////// +// common defines for the stubs +#define ms r4 +#define regs r5 +#define temp1 r2 /* careful, it overlaps with input registers */ +#define temp2 r3 /* careful, it overlaps with input registers */ +#define temp3 r7 +#define temp4 r14 + //++ // Name: -// ia64_os_mca_proc_state_dump() +// ia64_state_save() // // Stub Description: // -// This stub dumps the processor state during MCHK to a data area +// Save the state that is not in minstate. This is sensitive to the layout of +// struct ia64_sal_os_state in mca.h. +// +// r2 contains the return address, r3 contains either +// IA64_MCA_CPU_MCA_STACK_OFFSET or IA64_MCA_CPU_INIT_STACK_OFFSET. +// +// The OS to SAL section of struct ia64_sal_os_state is set to a default +// value of cold boot (MCA) or warm boot (INIT) and return to the same +// context. ia64_sal_os_state is also used to hold some registers that +// need to be saved and restored across the stack switches. +// +// Most input registers to this stub come from PAL/SAL +// r1 os gp, physical +// r8 pal_proc entry point +// r9 sal_proc entry point +// r10 sal gp +// r11 MCA - rendevzous state, INIT - reason code +// r12 sal return address +// r17 pal min_state +// r18 processor state parameter +// r19 monarch flag, set by the caller of this routine +// +// In addition to the SAL to OS state, this routine saves all the +// registers that appear in struct pt_regs and struct switch_stack, +// excluding those that are already in the PAL minstate area. This +// results in a partial pt_regs and switch_stack, the C code copies the +// remaining registers from PAL minstate to pt_regs and switch_stack. The +// resulting structures contain all the state of the original process when +// MCA/INIT occurred. // //-- -ia64_os_mca_proc_state_dump: -// Save bank 1 GRs 16-31 which will be used by c-language code when we switch -// to virtual addressing mode. - GET_IA64_MCA_DATA(r2) +ia64_state_save: + add regs=MCA_SOS_OFFSET, r3 + add ms=MCA_SOS_OFFSET+8, r3 + mov b0=r2 // save return address + cmp.eq p1,p2=IA64_MCA_CPU_MCA_STACK_OFFSET, r3 + ;; + GET_IA64_MCA_DATA(temp2) + ;; + add temp1=temp2, regs // struct ia64_sal_os_state on MCA or INIT stack + add temp2=temp2, ms // struct ia64_sal_os_state+8 on MCA or INIT stack + ;; + mov regs=temp1 // save the start of sos + st8 [temp1]=r1,16 // os_gp + st8 [temp2]=r8,16 // pal_proc + ;; + st8 [temp1]=r9,16 // sal_proc + st8 [temp2]=r11,16 // rv_rc + mov r11=cr.iipa ;; - add r2 = IA64_MCA_CPU_PROC_STATE_DUMP_OFFSET, r2 - ;; -// save ar.NaT - mov r5=ar.unat // ar.unat - -// save banked GRs 16-31 along with NaT bits - bsw.1;; - st8.spill [r2]=r16,8;; - st8.spill [r2]=r17,8;; - st8.spill [r2]=r18,8;; - st8.spill [r2]=r19,8;; - st8.spill [r2]=r20,8;; - st8.spill [r2]=r21,8;; - st8.spill [r2]=r22,8;; - st8.spill [r2]=r23,8;; - st8.spill [r2]=r24,8;; - st8.spill [r2]=r25,8;; - st8.spill [r2]=r26,8;; - st8.spill [r2]=r27,8;; - st8.spill [r2]=r28,8;; - st8.spill [r2]=r29,8;; - st8.spill [r2]=r30,8;; - st8.spill [r2]=r31,8;; - - mov r4=ar.unat;; - st8 [r2]=r4,8 // save User NaT bits for r16-r31 - mov ar.unat=r5 // restore original unat - bsw.0;; - -//save BRs - add r4=8,r2 // duplicate r2 in r4 - add r6=2*8,r2 // duplicate r2 in r4 - - mov r3=b0 - mov r5=b1 - mov r7=b2;; - st8 [r2]=r3,3*8 - st8 [r4]=r5,3*8 - st8 [r6]=r7,3*8;; - - mov r3=b3 - mov r5=b4 - mov r7=b5;; - st8 [r2]=r3,3*8 - st8 [r4]=r5,3*8 - st8 [r6]=r7,3*8;; - - mov r3=b6 - mov r5=b7;; - st8 [r2]=r3,2*8 - st8 [r4]=r5,2*8;; - -cSaveCRs: -// save CRs - add r4=8,r2 // duplicate r2 in r4 - add r6=2*8,r2 // duplicate r2 in r4 - - mov r3=cr.dcr - mov r5=cr.itm - mov r7=cr.iva;; - - st8 [r2]=r3,8*8 - st8 [r4]=r5,3*8 - st8 [r6]=r7,3*8;; // 48 byte rements - - mov r3=cr.pta;; - st8 [r2]=r3,8*8;; // 64 byte rements - -// if PSR.ic=0, reading interruption registers causes an illegal operation fault - mov r3=psr;; - tbit.nz.unc p6,p0=r3,PSR_IC;; // PSI Valid Log bit pos. test -(p6) st8 [r2]=r0,9*8+160 // increment by 232 byte inc. -begin_skip_intr_regs: -(p6) br SkipIntrRegs;; - - add r4=8,r2 // duplicate r2 in r4 - add r6=2*8,r2 // duplicate r2 in r6 - - mov r3=cr.ipsr - mov r5=cr.isr - mov r7=r0;; - st8 [r2]=r3,3*8 - st8 [r4]=r5,3*8 - st8 [r6]=r7,3*8;; - - mov r3=cr.iip - mov r5=cr.ifa - mov r7=cr.itir;; - st8 [r2]=r3,3*8 - st8 [r4]=r5,3*8 - st8 [r6]=r7,3*8;; - - mov r3=cr.iipa - mov r5=cr.ifs - mov r7=cr.iim;; - st8 [r2]=r3,3*8 - st8 [r4]=r5,3*8 - st8 [r6]=r7,3*8;; - - mov r3=cr25;; // cr.iha - st8 [r2]=r3,160;; // 160 byte rement - -SkipIntrRegs: - st8 [r2]=r0,152;; // another 152 byte . - - add r4=8,r2 // duplicate r2 in r4 - add r6=2*8,r2 // duplicate r2 in r6 - - mov r3=cr.lid -// mov r5=cr.ivr // cr.ivr, don't read it - mov r7=cr.tpr;; - st8 [r2]=r3,3*8 - st8 [r4]=r5,3*8 - st8 [r6]=r7,3*8;; - - mov r3=r0 // cr.eoi => cr67 - mov r5=r0 // cr.irr0 => cr68 - mov r7=r0;; // cr.irr1 => cr69 - st8 [r2]=r3,3*8 - st8 [r4]=r5,3*8 - st8 [r6]=r7,3*8;; - - mov r3=r0 // cr.irr2 => cr70 - mov r5=r0 // cr.irr3 => cr71 - mov r7=cr.itv;; - st8 [r2]=r3,3*8 - st8 [r4]=r5,3*8 - st8 [r6]=r7,3*8;; - - mov r3=cr.pmv - mov r5=cr.cmcv;; - st8 [r2]=r3,7*8 - st8 [r4]=r5,7*8;; - - mov r3=r0 // cr.lrr0 => cr80 - mov r5=r0;; // cr.lrr1 => cr81 - st8 [r2]=r3,23*8 - st8 [r4]=r5,23*8;; - - adds r2=25*8,r2;; - -cSaveARs: -// save ARs - add r4=8,r2 // duplicate r2 in r4 - add r6=2*8,r2 // duplicate r2 in r6 - - mov r3=ar.k0 - mov r5=ar.k1 - mov r7=ar.k2;; - st8 [r2]=r3,3*8 - st8 [r4]=r5,3*8 - st8 [r6]=r7,3*8;; - - mov r3=ar.k3 - mov r5=ar.k4 - mov r7=ar.k5;; - st8 [r2]=r3,3*8 - st8 [r4]=r5,3*8 - st8 [r6]=r7,3*8;; - - mov r3=ar.k6 - mov r5=ar.k7 - mov r7=r0;; // ar.kr8 - st8 [r2]=r3,10*8 - st8 [r4]=r5,10*8 - st8 [r6]=r7,10*8;; // rement by 72 bytes - - mov r3=ar.rsc - mov ar.rsc=r0 // put RSE in enforced lazy mode - mov r5=ar.bsp - ;; - mov r7=ar.bspstore;; - st8 [r2]=r3,3*8 - st8 [r4]=r5,3*8 - st8 [r6]=r7,3*8;; - - mov r3=ar.rnat;; - st8 [r2]=r3,8*13 // increment by 13x8 bytes - - mov r3=ar.ccv;; - st8 [r2]=r3,8*4 - - mov r3=ar.unat;; - st8 [r2]=r3,8*4 - - mov r3=ar.fpsr;; - st8 [r2]=r3,8*4 - - mov r3=ar.itc;; - st8 [r2]=r3,160 // 160 - - mov r3=ar.pfs;; - st8 [r2]=r3,8 - - mov r3=ar.lc;; - st8 [r2]=r3,8 - - mov r3=ar.ec;; - st8 [r2]=r3 - add r2=8*62,r2 //padding - -// save RRs - mov ar.lc=0x08-1 - movl r4=0x00;; - -cStRR: - dep.z r5=r4,61,3;; - mov r3=rr[r5];; - st8 [r2]=r3,8 - add r4=1,r4 - br.cloop.sptk.few cStRR - ;; -end_os_mca_dump: - br ia64_os_mca_done_dump;; + st8 [temp1]=r18,16 // proc_state_param + st8 [temp2]=r19,16 // monarch + mov r6=IA64_KR(CURRENT) + ;; + st8 [temp1]=r12,16 // sal_ra + st8 [temp2]=r10,16 // sal_gp + mov r12=cr.isr + ;; + st8 [temp1]=r17,16 // pal_min_state + st8 [temp2]=r6,16 // prev_IA64_KR_CURRENT + mov r6=IA64_KR(CURRENT_STACK) + ;; + st8 [temp1]=r6,16 // prev_IA64_KR_CURRENT_STACK + st8 [temp2]=r0,16 // prev_task, starts off as NULL + mov r6=cr.ifa + ;; + st8 [temp1]=r12,16 // cr.isr + st8 [temp2]=r6,16 // cr.ifa + mov r12=cr.itir + ;; + st8 [temp1]=r12,16 // cr.itir + st8 [temp2]=r11,16 // cr.iipa + mov r12=cr.iim + ;; + st8 [temp1]=r12,16 // cr.iim +(p1) mov r12=IA64_MCA_COLD_BOOT +(p2) mov r12=IA64_INIT_WARM_BOOT + mov r6=cr.iha + ;; + st8 [temp2]=r6,16 // cr.iha + st8 [temp1]=r12 // os_status, default is cold boot + mov r6=IA64_MCA_SAME_CONTEXT + ;; + st8 [temp1]=r6 // context, default is same context + + // Save the pt_regs data that is not in minstate. The previous code + // left regs at sos. + add regs=MCA_PT_REGS_OFFSET-MCA_SOS_OFFSET, regs + ;; + add temp1=PT(B6), regs + mov temp3=b6 + mov temp4=b7 + add temp2=PT(B7), regs + ;; + st8 [temp1]=temp3,PT(AR_CSD)-PT(B6) // save b6 + st8 [temp2]=temp4,PT(AR_SSD)-PT(B7) // save b7 + mov temp3=ar.csd + mov temp4=ar.ssd + cover // must be last in group + ;; + st8 [temp1]=temp3,PT(AR_UNAT)-PT(AR_CSD) // save ar.csd + st8 [temp2]=temp4,PT(AR_PFS)-PT(AR_SSD) // save ar.ssd + mov temp3=ar.unat + mov temp4=ar.pfs + ;; + st8 [temp1]=temp3,PT(AR_RNAT)-PT(AR_UNAT) // save ar.unat + st8 [temp2]=temp4,PT(AR_BSPSTORE)-PT(AR_PFS) // save ar.pfs + mov temp3=ar.rnat + mov temp4=ar.bspstore + ;; + st8 [temp1]=temp3,PT(LOADRS)-PT(AR_RNAT) // save ar.rnat + st8 [temp2]=temp4,PT(AR_FPSR)-PT(AR_BSPSTORE) // save ar.bspstore + mov temp3=ar.bsp + ;; + sub temp3=temp3, temp4 // ar.bsp - ar.bspstore + mov temp4=ar.fpsr + ;; + shl temp3=temp3,16 // compute ar.rsc to be used for "loadrs" + ;; + st8 [temp1]=temp3,PT(AR_CCV)-PT(LOADRS) // save loadrs + st8 [temp2]=temp4,PT(F6)-PT(AR_FPSR) // save ar.fpsr + mov temp3=ar.ccv + ;; + st8 [temp1]=temp3,PT(F7)-PT(AR_CCV) // save ar.ccv + stf.spill [temp2]=f6,PT(F8)-PT(F6) + ;; + stf.spill [temp1]=f7,PT(F9)-PT(F7) + stf.spill [temp2]=f8,PT(F10)-PT(F8) + ;; + stf.spill [temp1]=f9,PT(F11)-PT(F9) + stf.spill [temp2]=f10 + ;; + stf.spill [temp1]=f11 + + // Save the switch_stack data that is not in minstate nor pt_regs. The + // previous code left regs at pt_regs. + add regs=MCA_SWITCH_STACK_OFFSET-MCA_PT_REGS_OFFSET, regs + ;; + add temp1=SW(F2), regs + add temp2=SW(F3), regs + ;; + stf.spill [temp1]=f2,32 + stf.spill [temp2]=f3,32 + ;; + stf.spill [temp1]=f4,32 + stf.spill [temp2]=f5,32 + ;; + stf.spill [temp1]=f12,32 + stf.spill [temp2]=f13,32 + ;; + stf.spill [temp1]=f14,32 + stf.spill [temp2]=f15,32 + ;; + stf.spill [temp1]=f16,32 + stf.spill [temp2]=f17,32 + ;; + stf.spill [temp1]=f18,32 + stf.spill [temp2]=f19,32 + ;; + stf.spill [temp1]=f20,32 + stf.spill [temp2]=f21,32 + ;; + stf.spill [temp1]=f22,32 + stf.spill [temp2]=f23,32 + ;; + stf.spill [temp1]=f24,32 + stf.spill [temp2]=f25,32 + ;; + stf.spill [temp1]=f26,32 + stf.spill [temp2]=f27,32 + ;; + stf.spill [temp1]=f28,32 + stf.spill [temp2]=f29,32 + ;; + stf.spill [temp1]=f30,SW(B2)-SW(F30) + stf.spill [temp2]=f31,SW(B3)-SW(F31) + mov temp3=b2 + mov temp4=b3 + ;; + st8 [temp1]=temp3,16 // save b2 + st8 [temp2]=temp4,16 // save b3 + mov temp3=b4 + mov temp4=b5 + ;; + st8 [temp1]=temp3,SW(AR_LC)-SW(B4) // save b4 + st8 [temp2]=temp4 // save b5 + mov temp3=ar.lc + ;; + st8 [temp1]=temp3 // save ar.lc + + // FIXME: Some proms are incorrectly accessing the minstate area as + // cached data. The C code uses region 6, uncached virtual. Ensure + // that there is no cache data lying around for the first 1K of the + // minstate area. + // Remove this code in September 2006, that gives platforms a year to + // fix their proms and get their customers updated. + + add r1=32*1,r17 + add r2=32*2,r17 + add r3=32*3,r17 + add r4=32*4,r17 + add r5=32*5,r17 + add r6=32*6,r17 + add r7=32*7,r17 + ;; + fc r17 + fc r1 + fc r2 + fc r3 + fc r4 + fc r5 + fc r6 + fc r7 + add r17=32*8,r17 + add r1=32*8,r1 + add r2=32*8,r2 + add r3=32*8,r3 + add r4=32*8,r4 + add r5=32*8,r5 + add r6=32*8,r6 + add r7=32*8,r7 + ;; + fc r17 + fc r1 + fc r2 + fc r3 + fc r4 + fc r5 + fc r6 + fc r7 + add r17=32*8,r17 + add r1=32*8,r1 + add r2=32*8,r2 + add r3=32*8,r3 + add r4=32*8,r4 + add r5=32*8,r5 + add r6=32*8,r6 + add r7=32*8,r7 + ;; + fc r17 + fc r1 + fc r2 + fc r3 + fc r4 + fc r5 + fc r6 + fc r7 + add r17=32*8,r17 + add r1=32*8,r1 + add r2=32*8,r2 + add r3=32*8,r3 + add r4=32*8,r4 + add r5=32*8,r5 + add r6=32*8,r6 + add r7=32*8,r7 + ;; + fc r17 + fc r1 + fc r2 + fc r3 + fc r4 + fc r5 + fc r6 + fc r7 + + br.sptk b0 //EndStub////////////////////////////////////////////////////////////////////// //++ // Name: -// ia64_os_mca_proc_state_restore() +// ia64_state_restore() // // Stub Description: // -// This is a stub to restore the saved processor state during MCHK +// Restore the SAL/OS state. This is sensitive to the layout of struct +// ia64_sal_os_state in mca.h. +// +// r2 contains the return address, r3 contains either +// IA64_MCA_CPU_MCA_STACK_OFFSET or IA64_MCA_CPU_INIT_STACK_OFFSET. +// +// In addition to the SAL to OS state, this routine restores all the +// registers that appear in struct pt_regs and struct switch_stack, +// excluding those in the PAL minstate area. // //-- -ia64_os_mca_proc_state_restore: +ia64_state_restore: + // Restore the switch_stack data that is not in minstate nor pt_regs. + add regs=MCA_SWITCH_STACK_OFFSET, r3 + mov b0=r2 // save return address + ;; + GET_IA64_MCA_DATA(temp2) + ;; + add regs=temp2, regs + ;; + add temp1=SW(F2), regs + add temp2=SW(F3), regs + ;; + ldf.fill f2=[temp1],32 + ldf.fill f3=[temp2],32 + ;; + ldf.fill f4=[temp1],32 + ldf.fill f5=[temp2],32 + ;; + ldf.fill f12=[temp1],32 + ldf.fill f13=[temp2],32 + ;; + ldf.fill f14=[temp1],32 + ldf.fill f15=[temp2],32 + ;; + ldf.fill f16=[temp1],32 + ldf.fill f17=[temp2],32 + ;; + ldf.fill f18=[temp1],32 + ldf.fill f19=[temp2],32 + ;; + ldf.fill f20=[temp1],32 + ldf.fill f21=[temp2],32 + ;; + ldf.fill f22=[temp1],32 + ldf.fill f23=[temp2],32 + ;; + ldf.fill f24=[temp1],32 + ldf.fill f25=[temp2],32 + ;; + ldf.fill f26=[temp1],32 + ldf.fill f27=[temp2],32 + ;; + ldf.fill f28=[temp1],32 + ldf.fill f29=[temp2],32 + ;; + ldf.fill f30=[temp1],SW(B2)-SW(F30) + ldf.fill f31=[temp2],SW(B3)-SW(F31) + ;; + ld8 temp3=[temp1],16 // restore b2 + ld8 temp4=[temp2],16 // restore b3 + ;; + mov b2=temp3 + mov b3=temp4 + ld8 temp3=[temp1],SW(AR_LC)-SW(B4) // restore b4 + ld8 temp4=[temp2] // restore b5 + ;; + mov b4=temp3 + mov b5=temp4 + ld8 temp3=[temp1] // restore ar.lc + ;; + mov ar.lc=temp3 -// Restore bank1 GR16-31 - GET_IA64_MCA_DATA(r2) + // Restore the pt_regs data that is not in minstate. The previous code + // left regs at switch_stack. + add regs=MCA_PT_REGS_OFFSET-MCA_SWITCH_STACK_OFFSET, regs + ;; + add temp1=PT(B6), regs + add temp2=PT(B7), regs + ;; + ld8 temp3=[temp1],PT(AR_CSD)-PT(B6) // restore b6 + ld8 temp4=[temp2],PT(AR_SSD)-PT(B7) // restore b7 + ;; + mov b6=temp3 + mov b7=temp4 + ld8 temp3=[temp1],PT(AR_UNAT)-PT(AR_CSD) // restore ar.csd + ld8 temp4=[temp2],PT(AR_PFS)-PT(AR_SSD) // restore ar.ssd ;; - add r2 = IA64_MCA_CPU_PROC_STATE_DUMP_OFFSET, r2 - -restore_GRs: // restore bank-1 GRs 16-31 - bsw.1;; - add r3=16*8,r2;; // to get to NaT of GR 16-31 - ld8 r3=[r3];; - mov ar.unat=r3;; // first restore NaT - - ld8.fill r16=[r2],8;; - ld8.fill r17=[r2],8;; - ld8.fill r18=[r2],8;; - ld8.fill r19=[r2],8;; - ld8.fill r20=[r2],8;; - ld8.fill r21=[r2],8;; - ld8.fill r22=[r2],8;; - ld8.fill r23=[r2],8;; - ld8.fill r24=[r2],8;; - ld8.fill r25=[r2],8;; - ld8.fill r26=[r2],8;; - ld8.fill r27=[r2],8;; - ld8.fill r28=[r2],8;; - ld8.fill r29=[r2],8;; - ld8.fill r30=[r2],8;; - ld8.fill r31=[r2],8;; - - ld8 r3=[r2],8;; // increment to skip NaT - bsw.0;; - -restore_BRs: - add r4=8,r2 // duplicate r2 in r4 - add r6=2*8,r2;; // duplicate r2 in r4 - - ld8 r3=[r2],3*8 - ld8 r5=[r4],3*8 - ld8 r7=[r6],3*8;; - mov b0=r3 - mov b1=r5 - mov b2=r7;; - - ld8 r3=[r2],3*8 - ld8 r5=[r4],3*8 - ld8 r7=[r6],3*8;; - mov b3=r3 - mov b4=r5 - mov b5=r7;; - - ld8 r3=[r2],2*8 - ld8 r5=[r4],2*8;; - mov b6=r3 - mov b7=r5;; - -restore_CRs: - add r4=8,r2 // duplicate r2 in r4 - add r6=2*8,r2;; // duplicate r2 in r4 - - ld8 r3=[r2],8*8 - ld8 r5=[r4],3*8 - ld8 r7=[r6],3*8;; // 48 byte increments - mov cr.dcr=r3 - mov cr.itm=r5 - mov cr.iva=r7;; - - ld8 r3=[r2],8*8;; // 64 byte increments -// mov cr.pta=r3 - - -// if PSR.ic=1, reading interruption registers causes an illegal operation fault - mov r3=psr;; - tbit.nz.unc p6,p0=r3,PSR_IC;; // PSI Valid Log bit pos. test -(p6) st8 [r2]=r0,9*8+160 // increment by 232 byte inc. - -begin_rskip_intr_regs: -(p6) br rSkipIntrRegs;; - - add r4=8,r2 // duplicate r2 in r4 - add r6=2*8,r2;; // duplicate r2 in r4 - - ld8 r3=[r2],3*8 - ld8 r5=[r4],3*8 - ld8 r7=[r6],3*8;; - mov cr.ipsr=r3 -// mov cr.isr=r5 // cr.isr is read only - - ld8 r3=[r2],3*8 - ld8 r5=[r4],3*8 - ld8 r7=[r6],3*8;; - mov cr.iip=r3 - mov cr.ifa=r5 - mov cr.itir=r7;; - - ld8 r3=[r2],3*8 - ld8 r5=[r4],3*8 - ld8 r7=[r6],3*8;; - mov cr.iipa=r3 - mov cr.ifs=r5 - mov cr.iim=r7 - - ld8 r3=[r2],160;; // 160 byte increment - mov cr.iha=r3 - -rSkipIntrRegs: - ld8 r3=[r2],152;; // another 152 byte inc. - - add r4=8,r2 // duplicate r2 in r4 - add r6=2*8,r2;; // duplicate r2 in r6 - - ld8 r3=[r2],8*3 - ld8 r5=[r4],8*3 - ld8 r7=[r6],8*3;; - mov cr.lid=r3 -// mov cr.ivr=r5 // cr.ivr is read only - mov cr.tpr=r7;; - - ld8 r3=[r2],8*3 - ld8 r5=[r4],8*3 - ld8 r7=[r6],8*3;; -// mov cr.eoi=r3 -// mov cr.irr0=r5 // cr.irr0 is read only -// mov cr.irr1=r7;; // cr.irr1 is read only - - ld8 r3=[r2],8*3 - ld8 r5=[r4],8*3 - ld8 r7=[r6],8*3;; -// mov cr.irr2=r3 // cr.irr2 is read only -// mov cr.irr3=r5 // cr.irr3 is read only - mov cr.itv=r7;; - - ld8 r3=[r2],8*7 - ld8 r5=[r4],8*7;; - mov cr.pmv=r3 - mov cr.cmcv=r5;; - - ld8 r3=[r2],8*23 - ld8 r5=[r4],8*23;; - adds r2=8*23,r2 - adds r4=8*23,r4;; -// mov cr.lrr0=r3 -// mov cr.lrr1=r5 - - adds r2=8*2,r2;; - -restore_ARs: - add r4=8,r2 // duplicate r2 in r4 - add r6=2*8,r2;; // duplicate r2 in r4 - - ld8 r3=[r2],3*8 - ld8 r5=[r4],3*8 - ld8 r7=[r6],3*8;; - mov ar.k0=r3 - mov ar.k1=r5 - mov ar.k2=r7;; - - ld8 r3=[r2],3*8 - ld8 r5=[r4],3*8 - ld8 r7=[r6],3*8;; - mov ar.k3=r3 - mov ar.k4=r5 - mov ar.k5=r7;; - - ld8 r3=[r2],10*8 - ld8 r5=[r4],10*8 - ld8 r7=[r6],10*8;; - mov ar.k6=r3 - mov ar.k7=r5 - ;; - - ld8 r3=[r2],3*8 - ld8 r5=[r4],3*8 - ld8 r7=[r6],3*8;; -// mov ar.rsc=r3 -// mov ar.bsp=r5 // ar.bsp is read only - mov ar.rsc=r0 // make sure that RSE is in enforced lazy mode - ;; - mov ar.bspstore=r7;; - - ld8 r9=[r2],8*13;; - mov ar.rnat=r9 - - mov ar.rsc=r3 - ld8 r3=[r2],8*4;; - mov ar.ccv=r3 - - ld8 r3=[r2],8*4;; - mov ar.unat=r3 - - ld8 r3=[r2],8*4;; - mov ar.fpsr=r3 - - ld8 r3=[r2],160;; // 160 -// mov ar.itc=r3 - - ld8 r3=[r2],8;; - mov ar.pfs=r3 - - ld8 r3=[r2],8;; - mov ar.lc=r3 - - ld8 r3=[r2];; - mov ar.ec=r3 - add r2=8*62,r2;; // padding - -restore_RRs: - mov r5=ar.lc - mov ar.lc=0x08-1 - movl r4=0x00;; -cStRRr: - dep.z r7=r4,61,3 - ld8 r3=[r2],8;; - mov rr[r7]=r3 // what are its access previledges? - add r4=1,r4 - br.cloop.sptk.few cStRRr - ;; - mov ar.lc=r5 - ;; -end_os_mca_restore: - br ia64_os_mca_done_restore;; + mov ar.csd=temp3 + mov ar.ssd=temp4 + ld8 temp3=[temp1] // restore ar.unat + add temp1=PT(AR_CCV)-PT(AR_UNAT), temp1 + ld8 temp4=[temp2],PT(AR_FPSR)-PT(AR_PFS) // restore ar.pfs + ;; + mov ar.unat=temp3 + mov ar.pfs=temp4 + // ar.rnat, ar.bspstore, loadrs are restore in ia64_old_stack. + ld8 temp3=[temp1],PT(F6)-PT(AR_CCV) // restore ar.ccv + ld8 temp4=[temp2],PT(F7)-PT(AR_FPSR) // restore ar.fpsr + ;; + mov ar.ccv=temp3 + mov ar.fpsr=temp4 + ldf.fill f6=[temp1],PT(F8)-PT(F6) + ldf.fill f7=[temp2],PT(F9)-PT(F7) + ;; + ldf.fill f8=[temp1],PT(F10)-PT(F8) + ldf.fill f9=[temp2],PT(F11)-PT(F9) + ;; + ldf.fill f10=[temp1] + ldf.fill f11=[temp2] + + // Restore the SAL to OS state. The previous code left regs at pt_regs. + add regs=MCA_SOS_OFFSET-MCA_PT_REGS_OFFSET, regs + ;; + add temp1=IA64_SAL_OS_STATE_COMMON_OFFSET, regs + add temp2=IA64_SAL_OS_STATE_COMMON_OFFSET+8, regs + ;; + ld8 r12=[temp1],16 // sal_ra + ld8 r9=[temp2],16 // sal_gp + ;; + ld8 r22=[temp1],16 // pal_min_state, virtual + ld8 r21=[temp2],16 // prev_IA64_KR_CURRENT + ;; + ld8 r16=[temp1],16 // prev_IA64_KR_CURRENT_STACK + ld8 r20=[temp2],16 // prev_task + ;; + ld8 temp3=[temp1],16 // cr.isr + ld8 temp4=[temp2],16 // cr.ifa + ;; + mov cr.isr=temp3 + mov cr.ifa=temp4 + ld8 temp3=[temp1],16 // cr.itir + ld8 temp4=[temp2],16 // cr.iipa + ;; + mov cr.itir=temp3 + mov cr.iipa=temp4 + ld8 temp3=[temp1],16 // cr.iim + ld8 temp4=[temp2],16 // cr.iha + ;; + mov cr.iim=temp3 + mov cr.iha=temp4 + dep r22=0,r22,62,2 // pal_min_state, physical, uncached + mov IA64_KR(CURRENT)=r21 + ld8 r8=[temp1] // os_status + ld8 r10=[temp2] // context + + /* Wire IA64_TR_CURRENT_STACK to the stack that we are resuming to. To + * avoid any dependencies on the algorithm in ia64_switch_to(), just + * purge any existing CURRENT_STACK mapping and insert the new one. + * + * r16 contains prev_IA64_KR_CURRENT_STACK, r21 contains + * prev_IA64_KR_CURRENT, these values may have been changed by the C + * code. Do not use r8, r9, r10, r22, they contain values ready for + * the return to SAL. + */ + + mov r15=IA64_KR(CURRENT_STACK) // physical granule mapped by IA64_TR_CURRENT_STACK + ;; + shl r15=r15,IA64_GRANULE_SHIFT + ;; + dep r15=-1,r15,61,3 // virtual granule + mov r18=IA64_GRANULE_SHIFT<<2 // for cr.itir.ps + ;; + ptr.d r15,r18 + ;; + srlz.d + + extr.u r19=r21,61,3 // r21 = prev_IA64_KR_CURRENT + shl r20=r16,IA64_GRANULE_SHIFT // r16 = prev_IA64_KR_CURRENT_STACK + movl r21=PAGE_KERNEL // page properties + ;; + mov IA64_KR(CURRENT_STACK)=r16 + cmp.ne p6,p0=RGN_KERNEL,r19 // new stack is in the kernel region? + or r21=r20,r21 // construct PA | page properties +(p6) br.spnt 1f // the dreaded cpu 0 idle task in region 5:( + ;; + mov cr.itir=r18 + mov cr.ifa=r21 + mov r20=IA64_TR_CURRENT_STACK + ;; + itr.d dtr[r20]=r21 + ;; + srlz.d +1: + + br.sptk b0 //EndStub////////////////////////////////////////////////////////////////////// -// ok, the issue here is that we need to save state information so -// it can be useable by the kernel debugger and show regs routines. -// In order to do this, our best bet is save the current state (plus -// the state information obtain from the MIN_STATE_AREA) into a pt_regs -// format. This way we can pass it on in a useable format. +//++ +// Name: +// ia64_new_stack() // - +// Stub Description: // -// SAL to OS entry point for INIT on the monarch processor -// This has been defined for registration purposes with SAL -// as a part of ia64_mca_init. +// Switch to the MCA/INIT stack. // -// When we get here, the following registers have been -// set by the SAL for our use +// r2 contains the return address, r3 contains either +// IA64_MCA_CPU_MCA_STACK_OFFSET or IA64_MCA_CPU_INIT_STACK_OFFSET. // -// 1. GR1 = OS INIT GP -// 2. GR8 = PAL_PROC physical address -// 3. GR9 = SAL_PROC physical address -// 4. GR10 = SAL GP (physical) -// 5. GR11 = Init Reason -// 0 = Received INIT for event other than crash dump switch -// 1 = Received wakeup at the end of an OS_MCA corrected machine check -// 2 = Received INIT dude to CrashDump switch assertion +// On entry RBS is still on the original stack, this routine switches RBS +// to use the MCA/INIT stack. // -// 6. GR12 = Return address to location within SAL_INIT procedure - +// On entry, sos->pal_min_state is physical, on exit it is virtual. +// +//-- -GLOBAL_ENTRY(ia64_monarch_init_handler) - .prologue - // stash the information the SAL passed to os - SAL_TO_OS_MCA_HANDOFF_STATE_SAVE(r2) +ia64_new_stack: + add regs=MCA_PT_REGS_OFFSET, r3 + add temp2=MCA_SOS_OFFSET+IA64_SAL_OS_STATE_PAL_MIN_STATE_OFFSET, r3 + mov b0=r2 // save return address + GET_IA64_MCA_DATA(temp1) + invala ;; - SAVE_MIN_WITH_COVER + add temp2=temp2, temp1 // struct ia64_sal_os_state.pal_min_state on MCA or INIT stack + add regs=regs, temp1 // struct pt_regs on MCA or INIT stack ;; - mov r8=cr.ifa - mov r9=cr.isr - adds r3=8,r2 // set up second base pointer + // Address of minstate area provided by PAL is physical, uncacheable. + // Convert to Linux virtual address in region 6 for C code. + ld8 ms=[temp2] // pal_min_state, physical ;; - SAVE_REST - -// ok, enough should be saved at this point to be dangerous, and supply -// information for a dump -// We need to switch to Virtual mode before hitting the C functions. + dep temp1=-1,ms,62,2 // set region 6 + mov temp3=IA64_RBS_OFFSET-MCA_PT_REGS_OFFSET + ;; + st8 [temp2]=temp1 // pal_min_state, virtual - movl r2=IA64_PSR_IT|IA64_PSR_IC|IA64_PSR_DT|IA64_PSR_RT|IA64_PSR_DFH|IA64_PSR_BN - mov r3=psr // get the current psr, minimum enabled at this point + add temp4=temp3, regs // start of bspstore on new stack ;; - or r2=r2,r3 + mov ar.bspstore=temp4 // switch RBS to MCA/INIT stack ;; - movl r3=IVirtual_Switch + flushrs // must be first in group + br.sptk b0 + +//EndStub////////////////////////////////////////////////////////////////////// + + +//++ +// Name: +// ia64_old_stack() +// +// Stub Description: +// +// Switch to the old stack. +// +// r2 contains the return address, r3 contains either +// IA64_MCA_CPU_MCA_STACK_OFFSET or IA64_MCA_CPU_INIT_STACK_OFFSET. +// +// On entry, pal_min_state is virtual, on exit it is physical. +// +// On entry RBS is on the MCA/INIT stack, this routine switches RBS +// back to the previous stack. +// +// The psr is set to all zeroes. SAL return requires either all zeroes or +// just psr.mc set. Leaving psr.mc off allows INIT to be issued if this +// code does not perform correctly. +// +// The dirty registers at the time of the event were flushed to the +// MCA/INIT stack in ia64_pt_regs_save(). Restore the dirty registers +// before reverting to the previous bspstore. +//-- + +ia64_old_stack: + add regs=MCA_PT_REGS_OFFSET, r3 + mov b0=r2 // save return address + GET_IA64_MCA_DATA(temp2) + LOAD_PHYSICAL(p0,temp1,1f) ;; - mov cr.iip=r3 // short return to set the appropriate bits - mov cr.ipsr=r2 // need to do an rfi to set appropriate bits + mov cr.ipsr=r0 + mov cr.ifs=r0 + mov cr.iip=temp1 ;; + invala rfi +1: + + add regs=regs, temp2 // struct pt_regs on MCA or INIT stack ;; -IVirtual_Switch: - // - // We should now be running virtual - // - // Let's call the C handler to get the rest of the state info - // - alloc r14=ar.pfs,0,0,2,0 // now it's safe (must be first in insn group!) + add temp1=PT(LOADRS), regs ;; - adds out0=16,sp // out0 = pointer to pt_regs + ld8 temp2=[temp1],PT(AR_BSPSTORE)-PT(LOADRS) // restore loadrs + ;; + ld8 temp3=[temp1],PT(AR_RNAT)-PT(AR_BSPSTORE) // restore ar.bspstore + mov ar.rsc=temp2 + ;; + loadrs + ld8 temp4=[temp1] // restore ar.rnat + ;; + mov ar.bspstore=temp3 // back to old stack + ;; + mov ar.rnat=temp4 ;; - DO_SAVE_SWITCH_STACK - .body - adds out1=16,sp // out0 = pointer to switch_stack - br.call.sptk.many rp=ia64_init_handler -.ret1: + br.sptk b0 + +//EndStub////////////////////////////////////////////////////////////////////// -return_from_init: - br.sptk return_from_init -END(ia64_monarch_init_handler) +//++ +// Name: +// ia64_set_kernel_registers() +// +// Stub Description: +// +// Set the registers that are required by the C code in order to run on an +// MCA/INIT stack. // -// SAL to OS entry point for INIT on the slave processor -// This has been defined for registration purposes with SAL -// as a part of ia64_mca_init. +// r2 contains the return address, r3 contains either +// IA64_MCA_CPU_MCA_STACK_OFFSET or IA64_MCA_CPU_INIT_STACK_OFFSET. // +//-- -GLOBAL_ENTRY(ia64_slave_init_handler) -1: br.sptk 1b -END(ia64_slave_init_handler) +ia64_set_kernel_registers: + add temp3=MCA_SP_OFFSET, r3 + add temp4=MCA_SOS_OFFSET+IA64_SAL_OS_STATE_OS_GP_OFFSET, r3 + mov b0=r2 // save return address + GET_IA64_MCA_DATA(temp1) + ;; + add temp4=temp4, temp1 // &struct ia64_sal_os_state.os_gp + add r12=temp1, temp3 // kernel stack pointer on MCA/INIT stack + add r13=temp1, r3 // set current to start of MCA/INIT stack + add r20=temp1, r3 // physical start of MCA/INIT stack + ;; + ld8 r1=[temp4] // OS GP from SAL OS state + ;; + DATA_PA_TO_VA(r1,temp1) + DATA_PA_TO_VA(r12,temp2) + DATA_PA_TO_VA(r13,temp3) + ;; + mov IA64_KR(CURRENT)=r13 + + /* Wire IA64_TR_CURRENT_STACK to the MCA/INIT handler stack. To avoid + * any dependencies on the algorithm in ia64_switch_to(), just purge + * any existing CURRENT_STACK mapping and insert the new one. + */ + + mov r16=IA64_KR(CURRENT_STACK) // physical granule mapped by IA64_TR_CURRENT_STACK + ;; + shl r16=r16,IA64_GRANULE_SHIFT + ;; + dep r16=-1,r16,61,3 // virtual granule + mov r18=IA64_GRANULE_SHIFT<<2 // for cr.itir.ps + ;; + ptr.d r16,r18 + ;; + srlz.d + + shr.u r16=r20,IA64_GRANULE_SHIFT // r20 = physical start of MCA/INIT stack + movl r21=PAGE_KERNEL // page properties + ;; + mov IA64_KR(CURRENT_STACK)=r16 + or r21=r20,r21 // construct PA | page properties + ;; + mov cr.itir=r18 + mov cr.ifa=r13 + mov r20=IA64_TR_CURRENT_STACK + ;; + itr.d dtr[r20]=r21 + ;; + srlz.d + + br.sptk b0 + +//EndStub////////////////////////////////////////////////////////////////////// + +#undef ms +#undef regs +#undef temp1 +#undef temp2 +#undef temp3 +#undef temp4 + + +// Support function for mca.c, it is here to avoid using inline asm. Given the +// address of an rnat slot, if that address is below the current ar.bspstore +// then return the contents of that slot, otherwise return the contents of +// ar.rnat. +GLOBAL_ENTRY(ia64_get_rnat) + alloc r14=ar.pfs,1,0,0,0 + mov ar.rsc=0 + ;; + mov r14=ar.bspstore + ;; + cmp.lt p6,p7=in0,r14 + ;; +(p6) ld8 r8=[in0] +(p7) mov r8=ar.rnat + mov ar.rsc=3 + br.ret.sptk.many rp +END(ia64_get_rnat) diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c index abc0113..f081c60 100644 --- a/arch/ia64/kernel/mca_drv.c +++ b/arch/ia64/kernel/mca_drv.c @@ -4,6 +4,8 @@ * * Copyright (C) 2004 FUJITSU LIMITED * Copyright (C) Hidetoshi Seto (seto.hidetoshi@jp.fujitsu.com) + * Copyright (C) 2005 Silicon Graphics, Inc + * Copyright (C) 2005 Keith Owens <kaos@sgi.com> */ #include <linux/config.h> #include <linux/types.h> @@ -38,10 +40,6 @@ /* max size of SAL error record (default) */ static int sal_rec_max = 10000; -/* from mca.c */ -static ia64_mca_sal_to_os_state_t *sal_to_os_handoff_state; -static ia64_mca_os_to_sal_state_t *os_to_sal_handoff_state; - /* from mca_drv_asm.S */ extern void *mca_handler_bhhook(void); @@ -58,8 +56,9 @@ static struct page *page_isolate[MAX_PAGE_ISOLATE]; static int num_page_isolate = 0; typedef enum { - ISOLATE_NG = 0, - ISOLATE_OK = 1 + ISOLATE_NG, + ISOLATE_OK, + ISOLATE_NONE } isolate_status_t; /* @@ -76,7 +75,7 @@ static struct { * @paddr: poisoned memory location * * Return value: - * ISOLATE_OK / ISOLATE_NG + * one of isolate_status_t, ISOLATE_OK/NG/NONE. */ static isolate_status_t @@ -86,23 +85,26 @@ mca_page_isolate(unsigned long paddr) struct page *p; /* whether physical address is valid or not */ - if ( !ia64_phys_addr_valid(paddr) ) - return ISOLATE_NG; + if (!ia64_phys_addr_valid(paddr)) + return ISOLATE_NONE; + + if (!pfn_valid(paddr)) + return ISOLATE_NONE; /* convert physical address to physical page number */ p = pfn_to_page(paddr>>PAGE_SHIFT); /* check whether a page number have been already registered or not */ - for( i = 0; i < num_page_isolate; i++ ) - if( page_isolate[i] == p ) + for (i = 0; i < num_page_isolate; i++) + if (page_isolate[i] == p) return ISOLATE_OK; /* already listed */ /* limitation check */ - if( num_page_isolate == MAX_PAGE_ISOLATE ) + if (num_page_isolate == MAX_PAGE_ISOLATE) return ISOLATE_NG; /* kick pages having attribute 'SLAB' or 'Reserved' */ - if( PageSlab(p) || PageReserved(p) ) + if (PageSlab(p) || PageReserved(p)) return ISOLATE_NG; /* add attribute 'Reserved' and register the page */ @@ -124,10 +126,15 @@ mca_handler_bh(unsigned long paddr) current->pid, current->comm); spin_lock(&mca_bh_lock); - if (mca_page_isolate(paddr) == ISOLATE_OK) { + switch (mca_page_isolate(paddr)) { + case ISOLATE_OK: printk(KERN_DEBUG "Page isolation: ( %lx ) success.\n", paddr); - } else { + break; + case ISOLATE_NG: printk(KERN_DEBUG "Page isolation: ( %lx ) failure.\n", paddr); + break; + default: + break; } spin_unlock(&mca_bh_lock); @@ -141,10 +148,10 @@ mca_handler_bh(unsigned long paddr) * @peidx: pointer to index of processor error section */ -static void +static void mca_make_peidx(sal_log_processor_info_t *slpi, peidx_table_t *peidx) { - /* + /* * calculate the start address of * "struct cpuid_info" and "sal_processor_static_info_t". */ @@ -166,7 +173,7 @@ mca_make_peidx(sal_log_processor_info_t *slpi, peidx_table_t *peidx) } /** - * mca_make_slidx - Make index of SAL error record + * mca_make_slidx - Make index of SAL error record * @buffer: pointer to SAL error record * @slidx: pointer to index of SAL error record * @@ -174,12 +181,12 @@ mca_make_peidx(sal_log_processor_info_t *slpi, peidx_table_t *peidx) * 1 if record has platform error / 0 if not */ #define LOG_INDEX_ADD_SECT_PTR(sect, ptr) \ - { slidx_list_t *hl = &slidx_pool.buffer[slidx_pool.cur_idx]; \ - hl->hdr = ptr; \ - list_add(&hl->list, &(sect)); \ - slidx_pool.cur_idx = (slidx_pool.cur_idx + 1)%slidx_pool.max_idx; } + {slidx_list_t *hl = &slidx_pool.buffer[slidx_pool.cur_idx]; \ + hl->hdr = ptr; \ + list_add(&hl->list, &(sect)); \ + slidx_pool.cur_idx = (slidx_pool.cur_idx + 1)%slidx_pool.max_idx; } -static int +static int mca_make_slidx(void *buffer, slidx_table_t *slidx) { int platform_err = 0; @@ -216,28 +223,36 @@ mca_make_slidx(void *buffer, slidx_table_t *slidx) sp = (sal_log_section_hdr_t *)((char*)buffer + ercd_pos); if (!efi_guidcmp(sp->guid, SAL_PROC_DEV_ERR_SECT_GUID)) { LOG_INDEX_ADD_SECT_PTR(slidx->proc_err, sp); - } else if (!efi_guidcmp(sp->guid, SAL_PLAT_MEM_DEV_ERR_SECT_GUID)) { + } else if (!efi_guidcmp(sp->guid, + SAL_PLAT_MEM_DEV_ERR_SECT_GUID)) { platform_err = 1; LOG_INDEX_ADD_SECT_PTR(slidx->mem_dev_err, sp); - } else if (!efi_guidcmp(sp->guid, SAL_PLAT_SEL_DEV_ERR_SECT_GUID)) { + } else if (!efi_guidcmp(sp->guid, + SAL_PLAT_SEL_DEV_ERR_SECT_GUID)) { platform_err = 1; LOG_INDEX_ADD_SECT_PTR(slidx->sel_dev_err, sp); - } else if (!efi_guidcmp(sp->guid, SAL_PLAT_PCI_BUS_ERR_SECT_GUID)) { + } else if (!efi_guidcmp(sp->guid, + SAL_PLAT_PCI_BUS_ERR_SECT_GUID)) { platform_err = 1; LOG_INDEX_ADD_SECT_PTR(slidx->pci_bus_err, sp); - } else if (!efi_guidcmp(sp->guid, SAL_PLAT_SMBIOS_DEV_ERR_SECT_GUID)) { + } else if (!efi_guidcmp(sp->guid, + SAL_PLAT_SMBIOS_DEV_ERR_SECT_GUID)) { platform_err = 1; LOG_INDEX_ADD_SECT_PTR(slidx->smbios_dev_err, sp); - } else if (!efi_guidcmp(sp->guid, SAL_PLAT_PCI_COMP_ERR_SECT_GUID)) { + } else if (!efi_guidcmp(sp->guid, + SAL_PLAT_PCI_COMP_ERR_SECT_GUID)) { platform_err = 1; LOG_INDEX_ADD_SECT_PTR(slidx->pci_comp_err, sp); - } else if (!efi_guidcmp(sp->guid, SAL_PLAT_SPECIFIC_ERR_SECT_GUID)) { + } else if (!efi_guidcmp(sp->guid, + SAL_PLAT_SPECIFIC_ERR_SECT_GUID)) { platform_err = 1; LOG_INDEX_ADD_SECT_PTR(slidx->plat_specific_err, sp); - } else if (!efi_guidcmp(sp->guid, SAL_PLAT_HOST_CTLR_ERR_SECT_GUID)) { + } else if (!efi_guidcmp(sp->guid, + SAL_PLAT_HOST_CTLR_ERR_SECT_GUID)) { platform_err = 1; LOG_INDEX_ADD_SECT_PTR(slidx->host_ctlr_err, sp); - } else if (!efi_guidcmp(sp->guid, SAL_PLAT_BUS_ERR_SECT_GUID)) { + } else if (!efi_guidcmp(sp->guid, + SAL_PLAT_BUS_ERR_SECT_GUID)) { platform_err = 1; LOG_INDEX_ADD_SECT_PTR(slidx->plat_bus_err, sp); } else { @@ -255,15 +270,16 @@ mca_make_slidx(void *buffer, slidx_table_t *slidx) * Return value: * 0 on Success / -ENOMEM on Failure */ -static int +static int init_record_index_pools(void) { int i; int rec_max_size; /* Maximum size of SAL error records */ int sect_min_size; /* Minimum size of SAL error sections */ /* minimum size table of each section */ - static int sal_log_sect_min_sizes[] = { - sizeof(sal_log_processor_info_t) + sizeof(sal_processor_static_info_t), + static int sal_log_sect_min_sizes[] = { + sizeof(sal_log_processor_info_t) + + sizeof(sal_processor_static_info_t), sizeof(sal_log_mem_dev_err_info_t), sizeof(sal_log_sel_dev_err_info_t), sizeof(sal_log_pci_bus_err_info_t), @@ -296,7 +312,8 @@ init_record_index_pools(void) /* - 3 - */ slidx_pool.max_idx = (rec_max_size/sect_min_size) * 2 + 1; - slidx_pool.buffer = (slidx_list_t *) kmalloc(slidx_pool.max_idx * sizeof(slidx_list_t), GFP_KERNEL); + slidx_pool.buffer = (slidx_list_t *) + kmalloc(slidx_pool.max_idx * sizeof(slidx_list_t), GFP_KERNEL); return slidx_pool.buffer ? 0 : -ENOMEM; } @@ -310,24 +327,27 @@ init_record_index_pools(void) * is_mca_global - Check whether this MCA is global or not * @peidx: pointer of index of processor error section * @pbci: pointer to pal_bus_check_info_t + * @sos: pointer to hand off struct between SAL and OS * * Return value: * MCA_IS_LOCAL / MCA_IS_GLOBAL */ static mca_type_t -is_mca_global(peidx_table_t *peidx, pal_bus_check_info_t *pbci) +is_mca_global(peidx_table_t *peidx, pal_bus_check_info_t *pbci, + struct ia64_sal_os_state *sos) { - pal_processor_state_info_t *psp = (pal_processor_state_info_t*)peidx_psp(peidx); + pal_processor_state_info_t *psp = + (pal_processor_state_info_t*)peidx_psp(peidx); - /* + /* * PAL can request a rendezvous, if the MCA has a global scope. - * If "rz_always" flag is set, SAL requests MCA rendezvous + * If "rz_always" flag is set, SAL requests MCA rendezvous * in spite of global MCA. * Therefore it is local MCA when rendezvous has not been requested. * Failed to rendezvous, the system must be down. */ - switch (sal_to_os_handoff_state->imsto_rendez_state) { + switch (sos->rv_rc) { case -1: /* SAL rendezvous unsuccessful */ return MCA_IS_GLOBAL; case 0: /* SAL rendezvous not required */ @@ -382,13 +402,16 @@ is_mca_global(peidx_table_t *peidx, pal_bus_check_info_t *pbci) * @slidx: pointer of index of SAL error record * @peidx: pointer of index of processor error section * @pbci: pointer of pal_bus_check_info + * @sos: pointer to hand off struct between SAL and OS * * Return value: * 1 on Success / 0 on Failure */ static int -recover_from_read_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_check_info_t *pbci) +recover_from_read_error(slidx_table_t *slidx, + peidx_table_t *peidx, pal_bus_check_info_t *pbci, + struct ia64_sal_os_state *sos) { sal_log_mod_error_info_t *smei; pal_min_state_area_t *pmsa; @@ -426,7 +449,7 @@ recover_from_read_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_chec * setup for resume to bottom half of MCA, * "mca_handler_bhhook" */ - pmsa = (pal_min_state_area_t *)(sal_to_os_handoff_state->pal_min_state | (6ul<<61)); + pmsa = sos->pal_min_state; /* pass to bhhook as 1st argument (gr8) */ pmsa->pmsa_gr[8-1] = smei->target_identifier; /* set interrupted return address (but no use) */ @@ -453,23 +476,28 @@ recover_from_read_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_chec * @slidx: pointer of index of SAL error record * @peidx: pointer of index of processor error section * @pbci: pointer of pal_bus_check_info + * @sos: pointer to hand off struct between SAL and OS * * Return value: * 1 on Success / 0 on Failure */ static int -recover_from_platform_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_check_info_t *pbci) +recover_from_platform_error(slidx_table_t *slidx, peidx_table_t *peidx, + pal_bus_check_info_t *pbci, + struct ia64_sal_os_state *sos) { int status = 0; - pal_processor_state_info_t *psp = (pal_processor_state_info_t*)peidx_psp(peidx); + pal_processor_state_info_t *psp = + (pal_processor_state_info_t*)peidx_psp(peidx); if (psp->bc && pbci->eb && pbci->bsi == 0) { switch(pbci->type) { case 1: /* partial read */ case 3: /* full line(cpu) read */ case 9: /* I/O space read */ - status = recover_from_read_error(slidx, peidx, pbci); + status = recover_from_read_error(slidx, peidx, pbci, + sos); break; case 0: /* unknown */ case 2: /* partial write */ @@ -480,7 +508,8 @@ recover_from_platform_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_ case 8: /* write coalescing transactions */ case 10: /* I/O space write */ case 11: /* inter-processor interrupt message(IPI) */ - case 12: /* interrupt acknowledge or external task priority cycle */ + case 12: /* interrupt acknowledge or + external task priority cycle */ default: break; } @@ -495,6 +524,7 @@ recover_from_platform_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_ * @slidx: pointer of index of SAL error record * @peidx: pointer of index of processor error section * @pbci: pointer of pal_bus_check_info + * @sos: pointer to hand off struct between SAL and OS * * Return value: * 1 on Success / 0 on Failure @@ -508,14 +538,17 @@ recover_from_platform_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_ */ static int -recover_from_processor_error(int platform, slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_check_info_t *pbci) +recover_from_processor_error(int platform, slidx_table_t *slidx, + peidx_table_t *peidx, pal_bus_check_info_t *pbci, + struct ia64_sal_os_state *sos) { - pal_processor_state_info_t *psp = (pal_processor_state_info_t*)peidx_psp(peidx); + pal_processor_state_info_t *psp = + (pal_processor_state_info_t*)peidx_psp(peidx); - /* + /* * We cannot recover errors with other than bus_check. */ - if (psp->cc || psp->rc || psp->uc) + if (psp->cc || psp->rc || psp->uc) return 0; /* @@ -544,10 +577,10 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, peidx_table_t * * (e.g. a load from poisoned memory) * This means "there are some platform errors". */ - if (platform) - return recover_from_platform_error(slidx, peidx, pbci); - /* - * On account of strange SAL error record, we cannot recover. + if (platform) + return recover_from_platform_error(slidx, peidx, pbci, sos); + /* + * On account of strange SAL error record, we cannot recover. */ return 0; } @@ -555,15 +588,14 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, peidx_table_t * /** * mca_try_to_recover - Try to recover from MCA * @rec: pointer to a SAL error record + * @sos: pointer to hand off struct between SAL and OS * * Return value: * 1 on Success / 0 on Failure */ static int -mca_try_to_recover(void *rec, - ia64_mca_sal_to_os_state_t *sal_to_os_state, - ia64_mca_os_to_sal_state_t *os_to_sal_state) +mca_try_to_recover(void *rec, struct ia64_sal_os_state *sos) { int platform_err; int n_proc_err; @@ -571,10 +603,6 @@ mca_try_to_recover(void *rec, peidx_table_t peidx; pal_bus_check_info_t pbci; - /* handoff state from/to mca.c */ - sal_to_os_handoff_state = sal_to_os_state; - os_to_sal_handoff_state = os_to_sal_state; - /* Make index of SAL error record */ platform_err = mca_make_slidx(rec, &slidx); @@ -591,17 +619,19 @@ mca_try_to_recover(void *rec, } /* Make index of processor error section */ - mca_make_peidx((sal_log_processor_info_t*)slidx_first_entry(&slidx.proc_err)->hdr, &peidx); + mca_make_peidx((sal_log_processor_info_t*) + slidx_first_entry(&slidx.proc_err)->hdr, &peidx); /* Extract Processor BUS_CHECK[0] */ *((u64*)&pbci) = peidx_check_info(&peidx, bus_check, 0); /* Check whether MCA is global or not */ - if (is_mca_global(&peidx, &pbci)) + if (is_mca_global(&peidx, &pbci, sos)) return 0; /* Try to recover a processor error */ - return recover_from_processor_error(platform_err, &slidx, &peidx, &pbci); + return recover_from_processor_error(platform_err, &slidx, &peidx, + &pbci, sos); } /* @@ -614,7 +644,7 @@ int __init mca_external_handler_init(void) return -ENOMEM; /* register external mca handlers */ - if (ia64_reg_MCA_extension(mca_try_to_recover)){ + if (ia64_reg_MCA_extension(mca_try_to_recover)) { printk(KERN_ERR "ia64_reg_MCA_extension failed.\n"); kfree(slidx_pool.buffer); return -EFAULT; diff --git a/arch/ia64/kernel/mca_drv.h b/arch/ia64/kernel/mca_drv.h index 0227b76..e2f6fa1 100644 --- a/arch/ia64/kernel/mca_drv.h +++ b/arch/ia64/kernel/mca_drv.h @@ -6,7 +6,7 @@ * Copyright (C) Hidetoshi Seto (seto.hidetoshi@jp.fujitsu.com) */ /* - * Processor error section: + * Processor error section: * * +-sal_log_processor_info_t *info-------------+ * | sal_log_section_hdr_t header; | diff --git a/arch/ia64/kernel/mca_drv_asm.S b/arch/ia64/kernel/mca_drv_asm.S index 2d7e021..3f298ee 100644 --- a/arch/ia64/kernel/mca_drv_asm.S +++ b/arch/ia64/kernel/mca_drv_asm.S @@ -13,45 +13,45 @@ #include <asm/ptrace.h> GLOBAL_ENTRY(mca_handler_bhhook) - invala // clear RSE ? - ;; // - cover // - ;; // - clrrrb // + invala // clear RSE ? + ;; + cover + ;; + clrrrb ;; - alloc r16=ar.pfs,0,2,1,0 // make a new frame + alloc r16=ar.pfs,0,2,1,0 // make a new frame ;; - mov ar.rsc=0 + mov ar.rsc=0 ;; - mov r13=IA64_KR(CURRENT) // current task pointer + mov r13=IA64_KR(CURRENT) // current task pointer ;; - mov r2=r13 + mov r2=r13 ;; - addl r22=IA64_RBS_OFFSET,r2 + addl r22=IA64_RBS_OFFSET,r2 ;; - mov ar.bspstore=r22 + mov ar.bspstore=r22 ;; - addl sp=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r2 + addl sp=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r2 ;; - adds r2=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13 + adds r2=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13 ;; - st1 [r2]=r0 // clear current->thread.on_ustack flag - mov loc0=r16 - movl loc1=mca_handler_bh // recovery C function + st1 [r2]=r0 // clear current->thread.on_ustack flag + mov loc0=r16 + movl loc1=mca_handler_bh // recovery C function ;; - mov out0=r8 // poisoned address - mov b6=loc1 + mov out0=r8 // poisoned address + mov b6=loc1 ;; - mov loc1=rp + mov loc1=rp ;; - ssm psr.i + ssm psr.i ;; - br.call.sptk.many rp=b6 // does not return ... + br.call.sptk.many rp=b6 // does not return ... ;; - mov ar.pfs=loc0 - mov rp=loc1 + mov ar.pfs=loc0 + mov rp=loc1 ;; - mov r8=r0 + mov r8=r0 br.ret.sptk.many rp ;; END(mca_handler_bhhook) diff --git a/arch/ia64/kernel/minstate.h b/arch/ia64/kernel/minstate.h index f6d8a01..85ed541 100644 --- a/arch/ia64/kernel/minstate.h +++ b/arch/ia64/kernel/minstate.h @@ -5,73 +5,6 @@ #include "entry.h" /* - * For ivt.s we want to access the stack virtually so we don't have to disable translation - * on interrupts. - * - * On entry: - * r1: pointer to current task (ar.k6) - */ -#define MINSTATE_START_SAVE_MIN_VIRT \ -(pUStk) mov ar.rsc=0; /* set enforced lazy mode, pl 0, little-endian, loadrs=0 */ \ - ;; \ -(pUStk) mov.m r24=ar.rnat; \ -(pUStk) addl r22=IA64_RBS_OFFSET,r1; /* compute base of RBS */ \ -(pKStk) mov r1=sp; /* get sp */ \ - ;; \ -(pUStk) lfetch.fault.excl.nt1 [r22]; \ -(pUStk) addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r1; /* compute base of memory stack */ \ -(pUStk) mov r23=ar.bspstore; /* save ar.bspstore */ \ - ;; \ -(pUStk) mov ar.bspstore=r22; /* switch to kernel RBS */ \ -(pKStk) addl r1=-IA64_PT_REGS_SIZE,r1; /* if in kernel mode, use sp (r12) */ \ - ;; \ -(pUStk) mov r18=ar.bsp; \ -(pUStk) mov ar.rsc=0x3; /* set eager mode, pl 0, little-endian, loadrs=0 */ - -#define MINSTATE_END_SAVE_MIN_VIRT \ - bsw.1; /* switch back to bank 1 (must be last in insn group) */ \ - ;; - -/* - * For mca_asm.S we want to access the stack physically since the state is saved before we - * go virtual and don't want to destroy the iip or ipsr. - */ -#define MINSTATE_START_SAVE_MIN_PHYS \ -(pKStk) mov r3=IA64_KR(PER_CPU_DATA);; \ -(pKStk) addl r3=THIS_CPU(ia64_mca_data),r3;; \ -(pKStk) ld8 r3 = [r3];; \ -(pKStk) addl r3=IA64_MCA_CPU_INIT_STACK_OFFSET,r3;; \ -(pKStk) addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r3; \ -(pUStk) mov ar.rsc=0; /* set enforced lazy mode, pl 0, little-endian, loadrs=0 */ \ -(pUStk) addl r22=IA64_RBS_OFFSET,r1; /* compute base of register backing store */ \ - ;; \ -(pUStk) mov r24=ar.rnat; \ -(pUStk) addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r1; /* compute base of memory stack */ \ -(pUStk) mov r23=ar.bspstore; /* save ar.bspstore */ \ -(pUStk) dep r22=-1,r22,61,3; /* compute kernel virtual addr of RBS */ \ - ;; \ -(pUStk) mov ar.bspstore=r22; /* switch to kernel RBS */ \ - ;; \ -(pUStk) mov r18=ar.bsp; \ -(pUStk) mov ar.rsc=0x3; /* set eager mode, pl 0, little-endian, loadrs=0 */ \ - -#define MINSTATE_END_SAVE_MIN_PHYS \ - dep r12=-1,r12,61,3; /* make sp a kernel virtual address */ \ - ;; - -#ifdef MINSTATE_VIRT -# define MINSTATE_GET_CURRENT(reg) mov reg=IA64_KR(CURRENT) -# define MINSTATE_START_SAVE_MIN MINSTATE_START_SAVE_MIN_VIRT -# define MINSTATE_END_SAVE_MIN MINSTATE_END_SAVE_MIN_VIRT -#endif - -#ifdef MINSTATE_PHYS -# define MINSTATE_GET_CURRENT(reg) mov reg=IA64_KR(CURRENT);; tpa reg=reg -# define MINSTATE_START_SAVE_MIN MINSTATE_START_SAVE_MIN_PHYS -# define MINSTATE_END_SAVE_MIN MINSTATE_END_SAVE_MIN_PHYS -#endif - -/* * DO_SAVE_MIN switches to the kernel stacks (if necessary) and saves * the minimum state necessary that allows us to turn psr.ic back * on. @@ -97,7 +30,7 @@ * we can pass interruption state as arguments to a handler. */ #define DO_SAVE_MIN(COVER,SAVE_IFS,EXTRA) \ - MINSTATE_GET_CURRENT(r16); /* M (or M;;I) */ \ + mov r16=IA64_KR(CURRENT); /* M */ \ mov r27=ar.rsc; /* M */ \ mov r20=r1; /* A */ \ mov r25=ar.unat; /* M */ \ @@ -118,7 +51,21 @@ SAVE_IFS; \ cmp.eq pKStk,pUStk=r0,r17; /* are we in kernel mode already? */ \ ;; \ - MINSTATE_START_SAVE_MIN \ +(pUStk) mov ar.rsc=0; /* set enforced lazy mode, pl 0, little-endian, loadrs=0 */ \ + ;; \ +(pUStk) mov.m r24=ar.rnat; \ +(pUStk) addl r22=IA64_RBS_OFFSET,r1; /* compute base of RBS */ \ +(pKStk) mov r1=sp; /* get sp */ \ + ;; \ +(pUStk) lfetch.fault.excl.nt1 [r22]; \ +(pUStk) addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r1; /* compute base of memory stack */ \ +(pUStk) mov r23=ar.bspstore; /* save ar.bspstore */ \ + ;; \ +(pUStk) mov ar.bspstore=r22; /* switch to kernel RBS */ \ +(pKStk) addl r1=-IA64_PT_REGS_SIZE,r1; /* if in kernel mode, use sp (r12) */ \ + ;; \ +(pUStk) mov r18=ar.bsp; \ +(pUStk) mov ar.rsc=0x3; /* set eager mode, pl 0, little-endian, loadrs=0 */ \ adds r17=2*L1_CACHE_BYTES,r1; /* really: biggest cache-line size */ \ adds r16=PT(CR_IPSR),r1; \ ;; \ @@ -181,7 +128,8 @@ EXTRA; \ movl r1=__gp; /* establish kernel global pointer */ \ ;; \ - MINSTATE_END_SAVE_MIN + bsw.1; /* switch back to bank 1 (must be last in insn group) */ \ + ;; /* * SAVE_REST saves the remainder of pt_regs (with psr.ic on). diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c index f1aca7c..7a2f0a7 100644 --- a/arch/ia64/kernel/module.c +++ b/arch/ia64/kernel/module.c @@ -947,8 +947,8 @@ void percpu_modcopy (void *pcpudst, const void *src, unsigned long size) { unsigned int i; - for (i = 0; i < NR_CPUS; i++) - if (cpu_possible(i)) - memcpy(pcpudst + __per_cpu_offset[i], src, size); + for_each_cpu(i) { + memcpy(pcpudst + __per_cpu_offset[i], src, size); + } } #endif /* CONFIG_SMP */ diff --git a/arch/ia64/kernel/palinfo.c b/arch/ia64/kernel/palinfo.c index 25e7c83..89faa60 100644 --- a/arch/ia64/kernel/palinfo.c +++ b/arch/ia64/kernel/palinfo.c @@ -307,11 +307,9 @@ vm_info(char *page) if ((status = ia64_pal_vm_summary(&vm_info_1, &vm_info_2)) !=0) { printk(KERN_ERR "ia64_pal_vm_summary=%ld\n", status); - return 0; - } + } else { - - p += sprintf(p, + p += sprintf(p, "Physical Address Space : %d bits\n" "Virtual Address Space : %d bits\n" "Protection Key Registers(PKR) : %d\n" @@ -319,92 +317,99 @@ vm_info(char *page) "Hash Tag ID : 0x%x\n" "Size of RR.rid : %d\n", vm_info_1.pal_vm_info_1_s.phys_add_size, - vm_info_2.pal_vm_info_2_s.impl_va_msb+1, vm_info_1.pal_vm_info_1_s.max_pkr+1, - vm_info_1.pal_vm_info_1_s.key_size, vm_info_1.pal_vm_info_1_s.hash_tag_id, + vm_info_2.pal_vm_info_2_s.impl_va_msb+1, + vm_info_1.pal_vm_info_1_s.max_pkr+1, + vm_info_1.pal_vm_info_1_s.key_size, + vm_info_1.pal_vm_info_1_s.hash_tag_id, vm_info_2.pal_vm_info_2_s.rid_size); + } - if (ia64_pal_mem_attrib(&attrib) != 0) - return 0; - - p += sprintf(p, "Supported memory attributes : "); - sep = ""; - for (i = 0; i < 8; i++) { - if (attrib & (1 << i)) { - p += sprintf(p, "%s%s", sep, mem_attrib[i]); - sep = ", "; + if (ia64_pal_mem_attrib(&attrib) == 0) { + p += sprintf(p, "Supported memory attributes : "); + sep = ""; + for (i = 0; i < 8; i++) { + if (attrib & (1 << i)) { + p += sprintf(p, "%s%s", sep, mem_attrib[i]); + sep = ", "; + } } + p += sprintf(p, "\n"); } - p += sprintf(p, "\n"); if ((status = ia64_pal_vm_page_size(&tr_pages, &vw_pages)) !=0) { printk(KERN_ERR "ia64_pal_vm_page_size=%ld\n", status); - return 0; - } - - p += sprintf(p, - "\nTLB walker : %simplemented\n" - "Number of DTR : %d\n" - "Number of ITR : %d\n" - "TLB insertable page sizes : ", - vm_info_1.pal_vm_info_1_s.vw ? "" : "not ", - vm_info_1.pal_vm_info_1_s.max_dtr_entry+1, - vm_info_1.pal_vm_info_1_s.max_itr_entry+1); + } else { + p += sprintf(p, + "\nTLB walker : %simplemented\n" + "Number of DTR : %d\n" + "Number of ITR : %d\n" + "TLB insertable page sizes : ", + vm_info_1.pal_vm_info_1_s.vw ? "" : "not ", + vm_info_1.pal_vm_info_1_s.max_dtr_entry+1, + vm_info_1.pal_vm_info_1_s.max_itr_entry+1); - p = bitvector_process(p, tr_pages); - p += sprintf(p, "\nTLB purgeable page sizes : "); + p = bitvector_process(p, tr_pages); - p = bitvector_process(p, vw_pages); + p += sprintf(p, "\nTLB purgeable page sizes : "); + p = bitvector_process(p, vw_pages); + } if ((status=ia64_get_ptce(&ptce)) != 0) { printk(KERN_ERR "ia64_get_ptce=%ld\n", status); - return 0; - } - - p += sprintf(p, + } else { + p += sprintf(p, "\nPurge base address : 0x%016lx\n" "Purge outer loop count : %d\n" "Purge inner loop count : %d\n" "Purge outer loop stride : %d\n" "Purge inner loop stride : %d\n", - ptce.base, ptce.count[0], ptce.count[1], ptce.stride[0], ptce.stride[1]); + ptce.base, ptce.count[0], ptce.count[1], + ptce.stride[0], ptce.stride[1]); - p += sprintf(p, + p += sprintf(p, "TC Levels : %d\n" "Unique TC(s) : %d\n", vm_info_1.pal_vm_info_1_s.num_tc_levels, vm_info_1.pal_vm_info_1_s.max_unique_tcs); - for(i=0; i < vm_info_1.pal_vm_info_1_s.num_tc_levels; i++) { - for (j=2; j>0 ; j--) { - tc_pages = 0; /* just in case */ + for(i=0; i < vm_info_1.pal_vm_info_1_s.num_tc_levels; i++) { + for (j=2; j>0 ; j--) { + tc_pages = 0; /* just in case */ - /* even without unification, some levels may not be present */ - if ((status=ia64_pal_vm_info(i,j, &tc_info, &tc_pages)) != 0) { - continue; - } + /* even without unification, some levels may not be present */ + if ((status=ia64_pal_vm_info(i,j, &tc_info, &tc_pages)) != 0) { + continue; + } - p += sprintf(p, + p += sprintf(p, "\n%s Translation Cache Level %d:\n" "\tHash sets : %d\n" "\tAssociativity : %d\n" "\tNumber of entries : %d\n" "\tFlags : ", - cache_types[j+tc_info.tc_unified], i+1, tc_info.tc_num_sets, - tc_info.tc_associativity, tc_info.tc_num_entries); + cache_types[j+tc_info.tc_unified], i+1, + tc_info.tc_num_sets, + tc_info.tc_associativity, + tc_info.tc_num_entries); - if (tc_info.tc_pf) p += sprintf(p, "PreferredPageSizeOptimized "); - if (tc_info.tc_unified) p += sprintf(p, "Unified "); - if (tc_info.tc_reduce_tr) p += sprintf(p, "TCReduction"); + if (tc_info.tc_pf) + p += sprintf(p, "PreferredPageSizeOptimized "); + if (tc_info.tc_unified) + p += sprintf(p, "Unified "); + if (tc_info.tc_reduce_tr) + p += sprintf(p, "TCReduction"); - p += sprintf(p, "\n\tSupported page sizes: "); + p += sprintf(p, "\n\tSupported page sizes: "); - p = bitvector_process(p, tc_pages); + p = bitvector_process(p, tc_pages); - /* when unified date (j=2) is enough */ - if (tc_info.tc_unified) break; + /* when unified date (j=2) is enough */ + if (tc_info.tc_unified) + break; + } } } p += sprintf(p, "\n"); @@ -440,14 +445,14 @@ register_info(char *page) p += sprintf(p, "\n"); } - if (ia64_pal_rse_info(&phys_stacked, &hints) != 0) return 0; + if (ia64_pal_rse_info(&phys_stacked, &hints) == 0) { p += sprintf(p, "RSE stacked physical registers : %ld\n" "RSE load/store hints : %ld (%s)\n", phys_stacked, hints.ph_data, hints.ph_data < RSE_HINTS_COUNT ? rse_hints[hints.ph_data]: "(??)"); - + } if (ia64_pal_debug_info(&iregs, &dregs)) return 0; diff --git a/arch/ia64/kernel/patch.c b/arch/ia64/kernel/patch.c index 367804a..6a4ac7d 100644 --- a/arch/ia64/kernel/patch.c +++ b/arch/ia64/kernel/patch.c @@ -64,22 +64,30 @@ ia64_patch (u64 insn_addr, u64 mask, u64 val) void ia64_patch_imm64 (u64 insn_addr, u64 val) { - ia64_patch(insn_addr, + /* The assembler may generate offset pointing to either slot 1 + or slot 2 for a long (2-slot) instruction, occupying slots 1 + and 2. */ + insn_addr &= -16UL; + ia64_patch(insn_addr + 2, 0x01fffefe000UL, ( ((val & 0x8000000000000000UL) >> 27) /* bit 63 -> 36 */ | ((val & 0x0000000000200000UL) << 0) /* bit 21 -> 21 */ | ((val & 0x00000000001f0000UL) << 6) /* bit 16 -> 22 */ | ((val & 0x000000000000ff80UL) << 20) /* bit 7 -> 27 */ | ((val & 0x000000000000007fUL) << 13) /* bit 0 -> 13 */)); - ia64_patch(insn_addr - 1, 0x1ffffffffffUL, val >> 22); + ia64_patch(insn_addr + 1, 0x1ffffffffffUL, val >> 22); } void ia64_patch_imm60 (u64 insn_addr, u64 val) { - ia64_patch(insn_addr, + /* The assembler may generate offset pointing to either slot 1 + or slot 2 for a long (2-slot) instruction, occupying slots 1 + and 2. */ + insn_addr &= -16UL; + ia64_patch(insn_addr + 2, 0x011ffffe000UL, ( ((val & 0x0800000000000000UL) >> 23) /* bit 59 -> 36 */ | ((val & 0x00000000000fffffUL) << 13) /* bit 0 -> 13 */)); - ia64_patch(insn_addr - 1, 0x1fffffffffcUL, val >> 18); + ia64_patch(insn_addr + 1, 0x1fffffffffcUL, val >> 18); } /* diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index f1201ac..d71731e 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -38,6 +38,7 @@ #include <linux/pagemap.h> #include <linux/mount.h> #include <linux/bitops.h> +#include <linux/rcupdate.h> #include <asm/errno.h> #include <asm/intrinsics.h> @@ -496,7 +497,7 @@ typedef struct { static pfm_stats_t pfm_stats[NR_CPUS]; static pfm_session_t pfm_sessions; /* global sessions information */ -static spinlock_t pfm_alt_install_check = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(pfm_alt_install_check); static pfm_intr_handler_desc_t *pfm_alt_intr_handler; static struct proc_dir_entry *perfmon_dir; @@ -573,7 +574,7 @@ pfm_protect_ctx_ctxsw(pfm_context_t *x) return 0UL; } -static inline unsigned long +static inline void pfm_unprotect_ctx_ctxsw(pfm_context_t *x, unsigned long f) { spin_unlock(&(x)->ctx_lock); @@ -2217,15 +2218,18 @@ static void pfm_free_fd(int fd, struct file *file) { struct files_struct *files = current->files; + struct fdtable *fdt; /* * there ie no fd_uninstall(), so we do it here */ spin_lock(&files->file_lock); - files->fd[fd] = NULL; + fdt = files_fdtable(files); + rcu_assign_pointer(fdt->fd[fd], NULL); spin_unlock(&files->file_lock); - if (file) put_filp(file); + if (file) + put_filp(file); put_unused_fd(fd); } diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c index 6f0cc7a..ca68e6e 100644 --- a/arch/ia64/kernel/salinfo.c +++ b/arch/ia64/kernel/salinfo.c @@ -22,6 +22,11 @@ * * Dec 5 2004 kaos@sgi.com * Standardize which records are cleared automatically. + * + * Aug 18 2005 kaos@sgi.com + * mca.c may not pass a buffer, a NULL buffer just indicates that a new + * record is available in SAL. + * Replace some NR_CPUS by cpus_online, for hotplug cpu. */ #include <linux/types.h> @@ -193,7 +198,7 @@ shift1_data_saved (struct salinfo_data *data, int shift) * The buffer passed from mca.c points to the output from ia64_log_get. This is * a persistent buffer but its contents can change between the interrupt and * when user space processes the record. Save the record id to identify - * changes. + * changes. If the buffer is NULL then just update the bitmap. */ void salinfo_log_wakeup(int type, u8 *buffer, u64 size, int irqsafe) @@ -206,27 +211,29 @@ salinfo_log_wakeup(int type, u8 *buffer, u64 size, int irqsafe) BUG_ON(type >= ARRAY_SIZE(salinfo_log_name)); - if (irqsafe) - spin_lock_irqsave(&data_saved_lock, flags); - for (i = 0, data_saved = data->data_saved; i < saved_size; ++i, ++data_saved) { - if (!data_saved->buffer) - break; - } - if (i == saved_size) { - if (!data->saved_num) { - shift1_data_saved(data, 0); - data_saved = data->data_saved + saved_size - 1; - } else - data_saved = NULL; - } - if (data_saved) { - data_saved->cpu = smp_processor_id(); - data_saved->id = ((sal_log_record_header_t *)buffer)->id; - data_saved->size = size; - data_saved->buffer = buffer; + if (buffer) { + if (irqsafe) + spin_lock_irqsave(&data_saved_lock, flags); + for (i = 0, data_saved = data->data_saved; i < saved_size; ++i, ++data_saved) { + if (!data_saved->buffer) + break; + } + if (i == saved_size) { + if (!data->saved_num) { + shift1_data_saved(data, 0); + data_saved = data->data_saved + saved_size - 1; + } else + data_saved = NULL; + } + if (data_saved) { + data_saved->cpu = smp_processor_id(); + data_saved->id = ((sal_log_record_header_t *)buffer)->id; + data_saved->size = size; + data_saved->buffer = buffer; + } + if (irqsafe) + spin_unlock_irqrestore(&data_saved_lock, flags); } - if (irqsafe) - spin_unlock_irqrestore(&data_saved_lock, flags); if (!test_and_set_bit(smp_processor_id(), &data->cpu_event)) { if (irqsafe) @@ -244,7 +251,7 @@ salinfo_timeout_check(struct salinfo_data *data) int i; if (!data->open) return; - for (i = 0; i < NR_CPUS; ++i) { + for_each_online_cpu(i) { if (test_bit(i, &data->cpu_event)) { /* double up() is not a problem, user space will see no * records for the additional "events". @@ -291,7 +298,7 @@ retry: n = data->cpu_check; for (i = 0; i < NR_CPUS; i++) { - if (test_bit(n, &data->cpu_event)) { + if (test_bit(n, &data->cpu_event) && cpu_online(n)) { cpu = n; break; } @@ -585,11 +592,10 @@ salinfo_init(void) /* we missed any events before now */ online = 0; - for (j = 0; j < NR_CPUS; j++) - if (cpu_online(j)) { - set_bit(j, &data->cpu_event); - ++online; - } + for_each_online_cpu(j) { + set_bit(j, &data->cpu_event); + ++online; + } sema_init(&data->sem, online); *sdir++ = dir; diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 84f89da..fc56ca2 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -78,6 +78,19 @@ struct screen_info screen_info; unsigned long vga_console_iobase; unsigned long vga_console_membase; +static struct resource data_resource = { + .name = "Kernel data", + .flags = IORESOURCE_BUSY | IORESOURCE_MEM +}; + +static struct resource code_resource = { + .name = "Kernel code", + .flags = IORESOURCE_BUSY | IORESOURCE_MEM +}; +extern void efi_initialize_iomem_resources(struct resource *, + struct resource *); +extern char _text[], _end[], _etext[]; + unsigned long ia64_max_cacheline_size; unsigned long ia64_iobase; /* virtual address for I/O accesses */ EXPORT_SYMBOL(ia64_iobase); @@ -171,6 +184,22 @@ sort_regions (struct rsvd_region *rsvd_region, int max) } } +/* + * Request address space for all standard resources + */ +static int __init register_memory(void) +{ + code_resource.start = ia64_tpa(_text); + code_resource.end = ia64_tpa(_etext) - 1; + data_resource.start = ia64_tpa(_etext); + data_resource.end = ia64_tpa(_end) - 1; + efi_initialize_iomem_resources(&code_resource, &data_resource); + + return 0; +} + +__initcall(register_memory); + /** * reserve_memory - setup reserved memory areas * @@ -211,6 +240,9 @@ reserve_memory (void) } #endif + efi_memmap_init(&rsvd_region[n].start, &rsvd_region[n].end); + n++; + /* end of memory marker */ rsvd_region[n].start = ~0UL; rsvd_region[n].end = ~0UL; @@ -244,28 +276,31 @@ find_initrd (void) static void __init io_port_init (void) { - extern unsigned long ia64_iobase; unsigned long phys_iobase; /* - * Set `iobase' to the appropriate address in region 6 (uncached access range). + * Set `iobase' based on the EFI memory map or, failing that, the + * value firmware left in ar.k0. * - * The EFI memory map is the "preferred" location to get the I/O port space base, - * rather the relying on AR.KR0. This should become more clear in future SAL - * specs. We'll fall back to getting it out of AR.KR0 if no appropriate entry is - * found in the memory map. + * Note that in ia32 mode, IN/OUT instructions use ar.k0 to compute + * the port's virtual address, so ia32_load_state() loads it with a + * user virtual address. But in ia64 mode, glibc uses the + * *physical* address in ar.k0 to mmap the appropriate area from + * /dev/mem, and the inX()/outX() interfaces use MMIO. In both + * cases, user-mode can only use the legacy 0-64K I/O port space. + * + * ar.k0 is not involved in kernel I/O port accesses, which can use + * any of the I/O port spaces and are done via MMIO using the + * virtual mmio_base from the appropriate io_space[]. */ phys_iobase = efi_get_iobase(); - if (phys_iobase) - /* set AR.KR0 since this is all we use it for anyway */ - ia64_set_kr(IA64_KR_IO_BASE, phys_iobase); - else { + if (!phys_iobase) { phys_iobase = ia64_get_kr(IA64_KR_IO_BASE); - printk(KERN_INFO "No I/O port range found in EFI memory map, falling back " - "to AR.KR0\n"); - printk(KERN_INFO "I/O port base = 0x%lx\n", phys_iobase); + printk(KERN_INFO "No I/O port range found in EFI memory map, " + "falling back to AR.KR0 (0x%lx)\n", phys_iobase); } ia64_iobase = (unsigned long) ioremap(phys_iobase, 0); + ia64_set_kr(IA64_KR_IO_BASE, __pa(ia64_iobase)); /* setup legacy IO port space */ io_space[0].mmio_base = ia64_iobase; @@ -384,7 +419,7 @@ setup_arch (char **cmdline_p) if (early_console_setup(*cmdline_p) == 0) mark_bsp_online(); -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI /* Initialize the ACPI boot-time table parser */ acpi_table_init(); # ifdef CONFIG_ACPI_NUMA @@ -420,7 +455,7 @@ setup_arch (char **cmdline_p) cpu_init(); /* initialize the bootstrap CPU */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI acpi_boot_init(); #endif @@ -526,7 +561,7 @@ show_cpuinfo (struct seq_file *m, void *v) c->itc_freq / 1000000, c->itc_freq % 1000000, lpj*HZ/500000, (lpj*HZ/5000) % 100); #ifdef CONFIG_SMP - seq_printf(m, "siblings : %u\n", c->num_log); + seq_printf(m, "siblings : %u\n", cpus_weight(cpu_core_map[cpunum])); if (c->threads_per_core > 1 || c->cores_per_socket > 1) seq_printf(m, "physical id: %u\n" diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c index 0166a98..657ac99 100644 --- a/arch/ia64/kernel/smp.c +++ b/arch/ia64/kernel/smp.c @@ -185,8 +185,8 @@ send_IPI_allbutself (int op) { unsigned int i; - for (i = 0; i < NR_CPUS; i++) { - if (cpu_online(i) && i != smp_processor_id()) + for_each_online_cpu(i) { + if (i != smp_processor_id()) send_IPI_single(i, op); } } @@ -199,9 +199,9 @@ send_IPI_all (int op) { int i; - for (i = 0; i < NR_CPUS; i++) - if (cpu_online(i)) - send_IPI_single(i, op); + for_each_online_cpu(i) { + send_IPI_single(i, op); + } } /* diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index 7d72c0d..400a489 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -694,9 +694,9 @@ smp_cpus_done (unsigned int dummy) * Allow the user to impress friends. */ - for (cpu = 0; cpu < NR_CPUS; cpu++) - if (cpu_online(cpu)) - bogosum += cpu_data(cpu)->loops_per_jiffy; + for_each_online_cpu(cpu) { + bogosum += cpu_data(cpu)->loops_per_jiffy; + } printk(KERN_INFO "Total of %d processors activated (%lu.%02lu BogoMIPS).\n", (int)num_online_cpus(), bogosum/(500000/HZ), (bogosum/(5000/HZ))%100); diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c index 92ff46a..706b773 100644 --- a/arch/ia64/kernel/topology.c +++ b/arch/ia64/kernel/topology.c @@ -36,7 +36,7 @@ int arch_register_cpu(int num) parent = &sysfs_nodes[cpu_to_node(num)]; #endif /* CONFIG_NUMA */ -#ifdef CONFIG_ACPI_BOOT +#ifdef CONFIG_ACPI /* * If CPEI cannot be re-targetted, and this is * CPEI target, then dont create the control file diff --git a/arch/ia64/kernel/traps.c b/arch/ia64/kernel/traps.c index 4440c83..f970359 100644 --- a/arch/ia64/kernel/traps.c +++ b/arch/ia64/kernel/traps.c @@ -15,6 +15,7 @@ #include <linux/vt_kern.h> /* For unblank_screen() */ #include <linux/module.h> /* for EXPORT_SYMBOL */ #include <linux/hardirq.h> +#include <linux/kprobes.h> #include <asm/fpswa.h> #include <asm/ia32.h> @@ -122,7 +123,7 @@ die_if_kernel (char *str, struct pt_regs *regs, long err) } void -ia64_bad_break (unsigned long break_num, struct pt_regs *regs) +__kprobes ia64_bad_break (unsigned long break_num, struct pt_regs *regs) { siginfo_t siginfo; int sig, code; @@ -444,7 +445,7 @@ ia64_illegal_op_fault (unsigned long ec, long arg1, long arg2, long arg3, return rv; } -void +void __kprobes ia64_fault (unsigned long vector, unsigned long isr, unsigned long ifa, unsigned long iim, unsigned long itir, long arg5, long arg6, long arg7, struct pt_regs regs) diff --git a/arch/ia64/kernel/uncached.c b/arch/ia64/kernel/uncached.c index 4e9d06c..c6d4044 100644 --- a/arch/ia64/kernel/uncached.c +++ b/arch/ia64/kernel/uncached.c @@ -205,23 +205,18 @@ EXPORT_SYMBOL(uncached_free_page); static int __init uncached_build_memmap(unsigned long start, unsigned long end, void *arg) { - long length; - unsigned long vstart, vend; + long length = end - start; int node; - length = end - start; - vstart = start + __IA64_UNCACHED_OFFSET; - vend = end + __IA64_UNCACHED_OFFSET; - dprintk(KERN_ERR "uncached_build_memmap(%lx %lx)\n", start, end); - memset((char *)vstart, 0, length); + memset((char *)start, 0, length); - node = paddr_to_nid(start); + node = paddr_to_nid(start - __IA64_UNCACHED_OFFSET); - for (; vstart < vend ; vstart += PAGE_SIZE) { - dprintk(KERN_INFO "sticking %lx into the pool!\n", vstart); - gen_pool_free(uncached_pool[node], vstart, PAGE_SIZE); + for (; start < end ; start += PAGE_SIZE) { + dprintk(KERN_INFO "sticking %lx into the pool!\n", start); + gen_pool_free(uncached_pool[node], start, PAGE_SIZE); } return 0; diff --git a/arch/ia64/kernel/unwind.c b/arch/ia64/kernel/unwind.c index 3288be4..93d5a3b 100644 --- a/arch/ia64/kernel/unwind.c +++ b/arch/ia64/kernel/unwind.c @@ -2020,28 +2020,6 @@ init_frame_info (struct unw_frame_info *info, struct task_struct *t, } void -unw_init_from_interruption (struct unw_frame_info *info, struct task_struct *t, - struct pt_regs *pt, struct switch_stack *sw) -{ - unsigned long sof; - - init_frame_info(info, t, sw, pt->r12); - info->cfm_loc = &pt->cr_ifs; - info->unat_loc = &pt->ar_unat; - info->pfs_loc = &pt->ar_pfs; - sof = *info->cfm_loc & 0x7f; - info->bsp = (unsigned long) ia64_rse_skip_regs((unsigned long *) info->regstk.top, -sof); - info->ip = pt->cr_iip + ia64_psr(pt)->ri; - info->pt = (unsigned long) pt; - UNW_DPRINT(3, "unwind.%s:\n" - " bsp 0x%lx\n" - " sof 0x%lx\n" - " ip 0x%lx\n", - __FUNCTION__, info->bsp, sof, info->ip); - find_save_locs(info); -} - -void unw_init_frame_info (struct unw_frame_info *info, struct task_struct *t, struct switch_stack *sw) { unsigned long sol; diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S index a676e79..30d8564 100644 --- a/arch/ia64/kernel/vmlinux.lds.S +++ b/arch/ia64/kernel/vmlinux.lds.S @@ -48,6 +48,7 @@ SECTIONS *(.text) SCHED_TEXT LOCK_TEXT + KPROBES_TEXT *(.gnu.linkonce.t*) } .text2 : AT(ADDR(.text2) - LOAD_OFFSET) diff --git a/arch/ia64/lib/Makefile b/arch/ia64/lib/Makefile index 799407e..cb1af59 100644 --- a/arch/ia64/lib/Makefile +++ b/arch/ia64/lib/Makefile @@ -15,7 +15,6 @@ lib-$(CONFIG_ITANIUM) += copy_page.o copy_user.o memcpy.o lib-$(CONFIG_MCKINLEY) += copy_page_mck.o memcpy_mck.o lib-$(CONFIG_PERFMON) += carta_random.o lib-$(CONFIG_MD_RAID5) += xor.o -lib-$(CONFIG_HAVE_DEC_LOCK) += dec_and_lock.o AFLAGS___divdi3.o = AFLAGS___udivdi3.o = -DUNSIGNED diff --git a/arch/ia64/lib/dec_and_lock.c b/arch/ia64/lib/dec_and_lock.c deleted file mode 100644 index c7ce92f..0000000 --- a/arch/ia64/lib/dec_and_lock.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2003 Jerome Marchand, Bull S.A. - * Cleaned up by David Mosberger-Tang <davidm@hpl.hp.com> - * - * This file is released under the GPLv2, or at your option any later version. - * - * ia64 version of "atomic_dec_and_lock()" using the atomic "cmpxchg" instruction. This - * code is an adaptation of the x86 version of "atomic_dec_and_lock()". - */ - -#include <linux/compiler.h> -#include <linux/module.h> -#include <linux/spinlock.h> -#include <asm/atomic.h> - -/* - * Decrement REFCOUNT and if the count reaches zero, acquire the spinlock. Both of these - * operations have to be done atomically, so that the count doesn't drop to zero without - * acquiring the spinlock first. - */ -int -_atomic_dec_and_lock (atomic_t *refcount, spinlock_t *lock) -{ - int old, new; - - do { - old = atomic_read(refcount); - new = old - 1; - - if (unlikely (old == 1)) { - /* oops, we may be decrementing to zero, do it the slow way... */ - spin_lock(lock); - if (atomic_dec_and_test(refcount)) - return 1; - spin_unlock(lock); - return 0; - } - } while (cmpxchg(&refcount->counter, old, new) != old); - return 0; -} - -EXPORT_SYMBOL(_atomic_dec_and_lock); diff --git a/arch/ia64/lib/flush.S b/arch/ia64/lib/flush.S index 3e2cfa2..2a0d27f 100644 --- a/arch/ia64/lib/flush.S +++ b/arch/ia64/lib/flush.S @@ -20,6 +20,7 @@ * * Note: "in0" and "in1" are preserved for debugging purposes. */ + .section .kprobes.text,"ax" GLOBAL_ENTRY(flush_icache_range) .prologue diff --git a/arch/ia64/lib/memcpy_mck.S b/arch/ia64/lib/memcpy_mck.S index 6f308e6..46c9331 100644 --- a/arch/ia64/lib/memcpy_mck.S +++ b/arch/ia64/lib/memcpy_mck.S @@ -625,8 +625,11 @@ EK(.ex_handler, (p17) st8 [dst1]=r39,8); \ clrrrb ;; alloc saved_pfs_stack=ar.pfs,3,3,3,0 + cmp.lt p8,p0=A,r0 sub B = dst0, saved_in0 // how many byte copied so far ;; +(p8) mov A = 0; // A shouldn't be negative, cap it + ;; sub C = A, B sub D = saved_in2, A ;; diff --git a/arch/ia64/lib/swiotlb.c b/arch/ia64/lib/swiotlb.c index dbc0b3e..48e5ff2 100644 --- a/arch/ia64/lib/swiotlb.c +++ b/arch/ia64/lib/swiotlb.c @@ -49,6 +49,15 @@ */ #define IO_TLB_SHIFT 11 +#define SLABS_PER_PAGE (1 << (PAGE_SHIFT - IO_TLB_SHIFT)) + +/* + * Minimum IO TLB size to bother booting with. Systems with mainly + * 64bit capable cards will only lightly use the swiotlb. If we can't + * allocate a contiguous 1MB, we're probably in trouble anyway. + */ +#define IO_TLB_MIN_SLABS ((1<<20) >> IO_TLB_SHIFT) + int swiotlb_force; /* @@ -123,8 +132,8 @@ swiotlb_init_with_default_size (size_t default_size) /* * Get IO TLB memory from the low pages */ - io_tlb_start = alloc_bootmem_low_pages(io_tlb_nslabs * - (1 << IO_TLB_SHIFT)); + io_tlb_start = alloc_bootmem_low_pages_limit(io_tlb_nslabs * + (1 << IO_TLB_SHIFT), 0x100000000); if (!io_tlb_start) panic("Cannot allocate SWIOTLB buffer"); io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT); @@ -154,6 +163,99 @@ swiotlb_init (void) swiotlb_init_with_default_size(64 * (1<<20)); /* default to 64MB */ } +/* + * Systems with larger DMA zones (those that don't support ISA) can + * initialize the swiotlb later using the slab allocator if needed. + * This should be just like above, but with some error catching. + */ +int +swiotlb_late_init_with_default_size (size_t default_size) +{ + unsigned long i, req_nslabs = io_tlb_nslabs; + unsigned int order; + + if (!io_tlb_nslabs) { + io_tlb_nslabs = (default_size >> IO_TLB_SHIFT); + io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE); + } + + /* + * Get IO TLB memory from the low pages + */ + order = get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT)); + io_tlb_nslabs = SLABS_PER_PAGE << order; + + while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) { + io_tlb_start = (char *)__get_free_pages(GFP_DMA | __GFP_NOWARN, + order); + if (io_tlb_start) + break; + order--; + } + + if (!io_tlb_start) + goto cleanup1; + + if (order != get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT))) { + printk(KERN_WARNING "Warning: only able to allocate %ld MB " + "for software IO TLB\n", (PAGE_SIZE << order) >> 20); + io_tlb_nslabs = SLABS_PER_PAGE << order; + } + io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT); + memset(io_tlb_start, 0, io_tlb_nslabs * (1 << IO_TLB_SHIFT)); + + /* + * Allocate and initialize the free list array. This array is used + * to find contiguous free memory regions of size up to IO_TLB_SEGSIZE + * between io_tlb_start and io_tlb_end. + */ + io_tlb_list = (unsigned int *)__get_free_pages(GFP_KERNEL, + get_order(io_tlb_nslabs * sizeof(int))); + if (!io_tlb_list) + goto cleanup2; + + for (i = 0; i < io_tlb_nslabs; i++) + io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE); + io_tlb_index = 0; + + io_tlb_orig_addr = (unsigned char **)__get_free_pages(GFP_KERNEL, + get_order(io_tlb_nslabs * sizeof(char *))); + if (!io_tlb_orig_addr) + goto cleanup3; + + memset(io_tlb_orig_addr, 0, io_tlb_nslabs * sizeof(char *)); + + /* + * Get the overflow emergency buffer + */ + io_tlb_overflow_buffer = (void *)__get_free_pages(GFP_DMA, + get_order(io_tlb_overflow)); + if (!io_tlb_overflow_buffer) + goto cleanup4; + + printk(KERN_INFO "Placing %ldMB software IO TLB between 0x%lx - " + "0x%lx\n", (io_tlb_nslabs * (1 << IO_TLB_SHIFT)) >> 20, + virt_to_phys(io_tlb_start), virt_to_phys(io_tlb_end)); + + return 0; + +cleanup4: + free_pages((unsigned long)io_tlb_orig_addr, get_order(io_tlb_nslabs * + sizeof(char *))); + io_tlb_orig_addr = NULL; +cleanup3: + free_pages((unsigned long)io_tlb_list, get_order(io_tlb_nslabs * + sizeof(int))); + io_tlb_list = NULL; + io_tlb_end = NULL; +cleanup2: + free_pages((unsigned long)io_tlb_start, order); + io_tlb_start = NULL; +cleanup1: + io_tlb_nslabs = req_nslabs; + return -ENOMEM; +} + static inline int address_needs_mapping(struct device *hwdev, dma_addr_t addr) { diff --git a/arch/ia64/mm/Makefile b/arch/ia64/mm/Makefile index 7078f67..d78d20f 100644 --- a/arch/ia64/mm/Makefile +++ b/arch/ia64/mm/Makefile @@ -7,6 +7,5 @@ obj-y := init.o fault.o tlb.o extable.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_NUMA) += numa.o obj-$(CONFIG_DISCONTIGMEM) += discontig.o -ifndef CONFIG_DISCONTIGMEM -obj-y += contig.o -endif +obj-$(CONFIG_SPARSEMEM) += discontig.o +obj-$(CONFIG_FLATMEM) += contig.o diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index 91a055f..acaaec4 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -269,7 +269,7 @@ paging_init (void) efi_memmap_walk(find_largest_hole, (u64 *)&max_gap); if (max_gap < LARGE_GAP) { vmem_map = (struct page *) 0; - free_area_init_node(0, &contig_page_data, zones_size, 0, + free_area_init_node(0, NODE_DATA(0), zones_size, 0, zholes_size); } else { unsigned long map_size; @@ -282,7 +282,7 @@ paging_init (void) efi_memmap_walk(create_mem_map_page_table, NULL); NODE_DATA(0)->node_mem_map = vmem_map; - free_area_init_node(0, &contig_page_data, zones_size, + free_area_init_node(0, NODE_DATA(0), zones_size, 0, zholes_size); printk("Virtual mem_map starts at 0x%p\n", mem_map); diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index b5c90e5..a3788fb 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -421,6 +421,37 @@ static void __init memory_less_nodes(void) return; } +#ifdef CONFIG_SPARSEMEM +/** + * register_sparse_mem - notify SPARSEMEM that this memory range exists. + * @start: physical start of range + * @end: physical end of range + * @arg: unused + * + * Simply calls SPARSEMEM to register memory section(s). + */ +static int __init register_sparse_mem(unsigned long start, unsigned long end, + void *arg) +{ + int nid; + + start = __pa(start) >> PAGE_SHIFT; + end = __pa(end) >> PAGE_SHIFT; + nid = early_pfn_to_nid(start); + memory_present(nid, start, end); + + return 0; +} + +static void __init arch_sparse_init(void) +{ + efi_memmap_walk(register_sparse_mem, NULL); + sparse_init(); +} +#else +#define arch_sparse_init() do {} while (0) +#endif + /** * find_memory - walk the EFI memory map and setup the bootmem allocator * @@ -528,8 +559,10 @@ void show_mem(void) int shared = 0, cached = 0, reserved = 0; printk("Node ID: %d\n", pgdat->node_id); for(i = 0; i < pgdat->node_spanned_pages; i++) { - struct page *page = pgdat_page_nr(pgdat, i); - if (!ia64_pfn_valid(pgdat->node_start_pfn+i)) + struct page *page; + if (pfn_valid(pgdat->node_start_pfn + i)) + page = pfn_to_page(pgdat->node_start_pfn + i); + else continue; if (PageReserved(page)) reserved++; @@ -648,12 +681,16 @@ void __init paging_init(void) max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT; + arch_sparse_init(); + efi_memmap_walk(filter_rsvd_memory, count_node_pages); +#ifdef CONFIG_VIRTUAL_MEM_MAP vmalloc_end -= PAGE_ALIGN(max_low_pfn * sizeof(struct page)); vmem_map = (struct page *) vmalloc_end; efi_memmap_walk(create_mem_map_page_table, NULL); printk("Virtual mem_map starts at 0x%p\n", vmem_map); +#endif for_each_online_node(node) { memset(zones_size, 0, sizeof(zones_size)); @@ -690,7 +727,9 @@ void __init paging_init(void) pfn_offset = mem_data[node].min_pfn; +#ifdef CONFIG_VIRTUAL_MEM_MAP NODE_DATA(node)->node_mem_map = vmem_map + pfn_offset; +#endif free_area_init_node(node, NODE_DATA(node), zones_size, pfn_offset, zholes_size); } diff --git a/arch/ia64/mm/fault.c b/arch/ia64/mm/fault.c index ff62551..3c32af9 100644 --- a/arch/ia64/mm/fault.c +++ b/arch/ia64/mm/fault.c @@ -9,6 +9,7 @@ #include <linux/mm.h> #include <linux/smp_lock.h> #include <linux/interrupt.h> +#include <linux/kprobes.h> #include <asm/pgtable.h> #include <asm/processor.h> @@ -76,7 +77,7 @@ mapped_kernel_page_is_present (unsigned long address) return pte_present(pte); } -void +void __kprobes ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *regs) { int signal = SIGSEGV, code = SEGV_MAPERR; @@ -229,9 +230,6 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re return; } - if (ia64_done_with_exception(regs)) - return; - /* * Since we have no vma's for region 5, we might get here even if the address is * valid, due to the VHPT walker inserting a non present translation that becomes @@ -242,6 +240,9 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re if (REGION_NUMBER(address) == 5 && mapped_kernel_page_is_present(address)) return; + if (ia64_done_with_exception(regs)) + return; + /* * Oops. The kernel tried to access some bad page. We'll have to terminate things * with extreme prejudice. diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index 65f9958..98246ac 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -382,13 +382,22 @@ ia64_mmu_init (void *my_cpu_data) if (impl_va_bits < 51 || impl_va_bits > 61) panic("CPU has bogus IMPL_VA_MSB value of %lu!\n", impl_va_bits - 1); + /* + * mapped_space_bits - PAGE_SHIFT is the total number of ptes we need, + * which must fit into "vmlpt_bits - pte_bits" slots. Second half of + * the test makes sure that our mapped space doesn't overlap the + * unimplemented hole in the middle of the region. + */ + if ((mapped_space_bits - PAGE_SHIFT > vmlpt_bits - pte_bits) || + (mapped_space_bits > impl_va_bits - 1)) + panic("Cannot build a big enough virtual-linear page table" + " to cover mapped address space.\n" + " Try using a smaller page size.\n"); + /* place the VMLPT at the end of each page-table mapped region: */ pta = POW2(61) - POW2(vmlpt_bits); - if (POW2(mapped_space_bits) >= pta) - panic("mm/init: overlap between virtually mapped linear page table and " - "mapped kernel space!"); /* * Set the (virtually mapped linear) page table address. Bit * 8 selects between the short and long format, bits 2-7 the @@ -584,7 +593,7 @@ mem_init (void) platform_dma_init(); #endif -#ifndef CONFIG_DISCONTIGMEM +#ifdef CONFIG_FLATMEM if (!mem_map) BUG(); max_mapnr = max_low_pfn; diff --git a/arch/ia64/mm/numa.c b/arch/ia64/mm/numa.c index 77118bb..4e5c8b3 100644 --- a/arch/ia64/mm/numa.c +++ b/arch/ia64/mm/numa.c @@ -47,3 +47,27 @@ paddr_to_nid(unsigned long paddr) return (i < num_node_memblks) ? node_memblk[i].nid : (num_node_memblks ? -1 : 0); } + +#if defined(CONFIG_SPARSEMEM) && defined(CONFIG_NUMA) +/* + * Because of holes evaluate on section limits. + * If the section of memory exists, then return the node where the section + * resides. Otherwise return node 0 as the default. This is used by + * SPARSEMEM to allocate the SPARSEMEM sectionmap on the NUMA node where + * the section resides. + */ +int early_pfn_to_nid(unsigned long pfn) +{ + int i, section = pfn >> PFN_SECTION_SHIFT, ssec, esec; + + for (i = 0; i < num_node_memblks; i++) { + ssec = node_memblk[i].start_paddr >> PA_SECTION_SHIFT; + esec = (node_memblk[i].start_paddr + node_memblk[i].size + + ((1L << PA_SECTION_SHIFT) - 1)) >> PA_SECTION_SHIFT; + if (section >= ssec && section < esec) + return node_memblk[i].nid; + } + + return 0; +} +#endif diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c index 464557e..987fb75 100644 --- a/arch/ia64/mm/tlb.c +++ b/arch/ia64/mm/tlb.c @@ -77,9 +77,10 @@ wrap_mmu_context (struct mm_struct *mm) /* can't call flush_tlb_all() here because of race condition with O(1) scheduler [EF] */ { int cpu = get_cpu(); /* prevent preemption/migration */ - for (i = 0; i < NR_CPUS; ++i) - if (cpu_online(i) && (i != cpu)) + for_each_online_cpu(i) { + if (i != cpu) per_cpu(ia64_need_tlb_flush, i) = 1; + } put_cpu(); } local_flush_tlb_all(); diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 9977c12..017cfc3 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -120,29 +120,6 @@ struct pci_ops pci_root_ops = { .write = pci_write, }; -#ifdef CONFIG_NUMA -extern acpi_status acpi_map_iosapic(acpi_handle, u32, void *, void **); -static void acpi_map_iosapics(void) -{ - acpi_get_devices(NULL, acpi_map_iosapic, NULL, NULL); -} -#else -static void acpi_map_iosapics(void) -{ - return; -} -#endif /* CONFIG_NUMA */ - -static int __init -pci_acpi_init (void) -{ - acpi_map_iosapics(); - - return 0; -} - -subsys_initcall(pci_acpi_init); - /* Called by ACPI when it finds a new root bus. */ static struct pci_controller * __devinit @@ -191,6 +168,29 @@ add_io_space (struct acpi_resource_address64 *addr) return IO_SPACE_BASE(i); } +static acpi_status __devinit resource_to_window(struct acpi_resource *resource, + struct acpi_resource_address64 *addr) +{ + acpi_status status; + + /* + * We're only interested in _CRS descriptors that are + * - address space descriptors for memory or I/O space + * - non-zero size + * - producers, i.e., the address space is routed downstream, + * not consumed by the bridge itself + */ + status = acpi_resource_to_address64(resource, addr); + if (ACPI_SUCCESS(status) && + (addr->resource_type == ACPI_MEMORY_RANGE || + addr->resource_type == ACPI_IO_RANGE) && + addr->address_length && + addr->producer_consumer == ACPI_PRODUCER) + return AE_OK; + + return AE_ERROR; +} + static acpi_status __devinit count_window (struct acpi_resource *resource, void *data) { @@ -198,11 +198,9 @@ count_window (struct acpi_resource *resource, void *data) struct acpi_resource_address64 addr; acpi_status status; - status = acpi_resource_to_address64(resource, &addr); + status = resource_to_window(resource, &addr); if (ACPI_SUCCESS(status)) - if (addr.resource_type == ACPI_MEMORY_RANGE || - addr.resource_type == ACPI_IO_RANGE) - (*windows)++; + (*windows)++; return AE_OK; } @@ -221,13 +219,11 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data) unsigned long flags, offset = 0; struct resource *root; - status = acpi_resource_to_address64(res, &addr); + /* Return AE_OK for non-window resources to keep scanning for more */ + status = resource_to_window(res, &addr); if (!ACPI_SUCCESS(status)) return AE_OK; - if (!addr.address_length) - return AE_OK; - if (addr.resource_type == ACPI_MEMORY_RANGE) { flags = IORESOURCE_MEM; root = &iomem_resource; @@ -498,13 +494,11 @@ pcibios_enable_device (struct pci_dev *dev, int mask) return acpi_pci_irq_enable(dev); } -#ifdef CONFIG_ACPI_DEALLOCATE_IRQ void pcibios_disable_device (struct pci_dev *dev) { acpi_pci_irq_disable(dev); } -#endif /* CONFIG_ACPI_DEALLOCATE_IRQ */ void pcibios_align_resource (void *data, struct resource *res, diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index 4564ed0..b4f5053 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -22,8 +22,6 @@ #include "xtalk/hubdev.h" #include "xtalk/xwidgetdev.h" -nasid_t master_nasid = INVALID_NASID; /* Partition Master */ - static struct list_head sn_sysdata_list; /* sysdata list struct */ @@ -165,7 +163,7 @@ static void sn_fixup_ionodes(void) * Get SGI Specific HUB chipset information. * Inform Prom that this kernel can support domain bus numbering. */ - for (i = 0; i < numionodes; i++) { + for (i = 0; i < num_cnodes; i++) { hubdev = (struct hubdev_info *)(NODEPDA(i)->pdinfo); nasid = cnodeid_to_nasid(i); hubdev->max_segment_number = 0xffffffff; @@ -431,7 +429,7 @@ void sn_bus_store_sysdata(struct pci_dev *dev) { struct sysdata_el *element; - element = kcalloc(1, sizeof(struct sysdata_el), GFP_KERNEL); + element = kzalloc(sizeof(struct sysdata_el), GFP_KERNEL); if (!element) { dev_dbg(dev, "%s: out of memory!\n", __FUNCTION__); return; diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c index 9fc7463..01d18b7 100644 --- a/arch/ia64/sn/kernel/irq.c +++ b/arch/ia64/sn/kernel/irq.c @@ -23,7 +23,7 @@ static void force_interrupt(int irq); static void register_intr_pda(struct sn_irq_info *sn_irq_info); static void unregister_intr_pda(struct sn_irq_info *sn_irq_info); -extern int sn_force_interrupt_flag; +int sn_force_interrupt_flag = 1; extern int sn_ioif_inited; static struct list_head **sn_irq_lh; static spinlock_t sn_irq_info_lock = SPIN_LOCK_UNLOCKED; /* non-IRQ lock */ diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index a594aca..0fb579e 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -49,6 +49,7 @@ #include <asm/sn/clksupport.h> #include <asm/sn/sn_sal.h> #include <asm/sn/geo.h> +#include <asm/sn/sn_feature_sets.h> #include "xtalk/xwidgetdev.h" #include "xtalk/hubdev.h" #include <asm/sn/klconfig.h> @@ -56,9 +57,7 @@ DEFINE_PER_CPU(struct pda_s, pda_percpu); -#define MAX_PHYS_MEMORY (1UL << 49) /* 1 TB */ - -lboard_t *root_lboard[MAX_COMPACT_NODES]; +#define MAX_PHYS_MEMORY (1UL << IA64_MAX_PHYS_BITS) /* Max physical address supported */ extern void bte_init_node(nodepda_t *, cnodeid_t); @@ -96,14 +95,15 @@ u8 sn_region_size; EXPORT_SYMBOL(sn_region_size); int sn_prom_type; /* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */ -short physical_node_map[MAX_PHYSNODE_ID]; +short physical_node_map[MAX_NUMALINK_NODES]; +static unsigned long sn_prom_features[MAX_PROM_FEATURE_SETS]; EXPORT_SYMBOL(physical_node_map); -int numionodes; +int num_cnodes; static void sn_init_pdas(char **); -static void scan_for_ionodes(void); +static void build_cnode_tables(void); static nodepda_t *nodepdaindr[MAX_COMPACT_NODES]; @@ -138,19 +138,6 @@ char drive_info[4 * 16]; #endif /* - * Get nasid of current cpu early in boot before nodepda is initialized - */ -static int -boot_get_nasid(void) -{ - int nasid; - - if (ia64_sn_get_sapic_info(get_sapicid(), &nasid, NULL, NULL)) - BUG(); - return nasid; -} - -/* * This routine can only be used during init, since * smp_boot_data is an init data structure. * We have to use smp_boot_data.cpu_phys_id to find @@ -221,7 +208,6 @@ void __init early_sn_setup(void) } extern int platform_intr_list[]; -extern nasid_t master_nasid; static int __initdata shub_1_1_found = 0; /* @@ -267,11 +253,13 @@ static void __init sn_check_for_wars(void) void __init sn_setup(char **cmdline_p) { long status, ticks_per_sec, drift; - int pxm; u32 version = sn_sal_rev(); extern void sn_cpu_init(void); - ia64_sn_plat_set_error_handling_features(); + ia64_sn_plat_set_error_handling_features(); // obsolete + ia64_sn_set_os_feature(OSF_MCA_SLV_TO_OS_INIT_SLV); + ia64_sn_set_os_feature(OSF_FEAT_LOG_SBES); + #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) /* @@ -295,11 +283,10 @@ void __init sn_setup(char **cmdline_p) MAX_DMA_ADDRESS = PAGE_OFFSET + MAX_PHYS_MEMORY; - memset(physical_node_map, -1, sizeof(physical_node_map)); - for (pxm = 0; pxm < MAX_PXM_DOMAINS; pxm++) - if (pxm_to_nid_map[pxm] != -1) - physical_node_map[pxm_to_nasid(pxm)] = - pxm_to_nid_map[pxm]; + /* + * Build the tables for managing cnodes. + */ + build_cnode_tables(); /* * Old PROMs do not provide an ACPI FADT. Disable legacy keyboard @@ -314,18 +301,6 @@ void __init sn_setup(char **cmdline_p) printk("SGI SAL version %x.%02x\n", version >> 8, version & 0x00FF); - /* - * Confirm the SAL we're running on is recent enough... - */ - if (version < SN_SAL_MIN_VERSION) { - printk(KERN_ERR "This kernel needs SGI SAL version >= " - "%x.%02x\n", SN_SAL_MIN_VERSION >> 8, - SN_SAL_MIN_VERSION & 0x00FF); - panic("PROM version too old\n"); - } - - master_nasid = boot_get_nasid(); - status = ia64_sal_freq_base(SAL_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec, &drift); @@ -383,15 +358,6 @@ static void __init sn_init_pdas(char **cmdline_p) { cnodeid_t cnode; - memset(sn_cnodeid_to_nasid, -1, - sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid))); - for_each_online_node(cnode) - sn_cnodeid_to_nasid[cnode] = - pxm_to_nasid(nid_to_pxm_map[cnode]); - - numionodes = num_online_nodes(); - scan_for_ionodes(); - /* * Allocate & initalize the nodepda for each node. */ @@ -407,7 +373,7 @@ static void __init sn_init_pdas(char **cmdline_p) /* * Allocate & initialize nodepda for TIOs. For now, put them on node 0. */ - for (cnode = num_online_nodes(); cnode < numionodes; cnode++) { + for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++) { nodepdaindr[cnode] = alloc_bootmem_node(NODE_DATA(0), sizeof(nodepda_t)); memset(nodepdaindr[cnode], 0, sizeof(nodepda_t)); @@ -416,7 +382,7 @@ static void __init sn_init_pdas(char **cmdline_p) /* * Now copy the array of nodepda pointers to each nodepda. */ - for (cnode = 0; cnode < numionodes; cnode++) + for (cnode = 0; cnode < num_cnodes; cnode++) memcpy(nodepdaindr[cnode]->pernode_pdaindr, nodepdaindr, sizeof(nodepdaindr)); @@ -433,7 +399,7 @@ static void __init sn_init_pdas(char **cmdline_p) * Initialize the per node hubdev. This includes IO Nodes and * headless/memless nodes. */ - for (cnode = 0; cnode < numionodes; cnode++) { + for (cnode = 0; cnode < num_cnodes; cnode++) { hubdev_init_node(nodepdaindr[cnode], cnode); } } @@ -480,6 +446,10 @@ void __init sn_cpu_init(void) if (nodepdaindr[0] == NULL) return; + for (i = 0; i < MAX_PROM_FEATURE_SETS; i++) + if (ia64_sn_get_prom_feature_set(i, &sn_prom_features[i]) != 0) + break; + cpuid = smp_processor_id(); cpuphyid = get_sapicid(); @@ -554,87 +524,58 @@ void __init sn_cpu_init(void) } /* - * Scan klconfig for ionodes. Add the nasids to the - * physical_node_map and the pda and increment numionodes. + * Build tables for converting between NASIDs and cnodes. */ +static inline int __init board_needs_cnode(int type) +{ + return (type == KLTYPE_SNIA || type == KLTYPE_TIO); +} -static void __init scan_for_ionodes(void) +void __init build_cnode_tables(void) { - int nasid = 0; + int nasid; + int node; lboard_t *brd; - /* fakeprom does not support klgraph */ - if (IS_RUNNING_ON_FAKE_PROM()) - return; - - /* Setup ionodes with memory */ - for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) { - char *klgraph_header; - cnodeid_t cnodeid; - - if (physical_node_map[nasid] == -1) - continue; + memset(physical_node_map, -1, sizeof(physical_node_map)); + memset(sn_cnodeid_to_nasid, -1, + sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid))); - cnodeid = -1; - klgraph_header = __va(ia64_sn_get_klconfig_addr(nasid)); - if (!klgraph_header) { - BUG(); /* All nodes must have klconfig tables! */ - } - cnodeid = nasid_to_cnodeid(nasid); - root_lboard[cnodeid] = (lboard_t *) - NODE_OFFSET_TO_LBOARD((nasid), - ((kl_config_hdr_t - *) (klgraph_header))-> - ch_board_info); + /* + * First populate the tables with C/M bricks. This ensures that + * cnode == node for all C & M bricks. + */ + for_each_online_node(node) { + nasid = pxm_to_nasid(nid_to_pxm_map[node]); + sn_cnodeid_to_nasid[node] = nasid; + physical_node_map[nasid] = node; } - /* Scan headless/memless IO Nodes. */ - for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) { - /* if there's no nasid, don't try to read the klconfig on the node */ - if (physical_node_map[nasid] == -1) - continue; - brd = find_lboard_any((lboard_t *) - root_lboard[nasid_to_cnodeid(nasid)], - KLTYPE_SNIA); - if (brd) { - brd = KLCF_NEXT_ANY(brd); /* Skip this node's lboard */ - if (!brd) - continue; - } - - brd = find_lboard_any(brd, KLTYPE_SNIA); + /* + * num_cnodes is total number of C/M/TIO bricks. Because of the 256 node + * limit on the number of nodes, we can't use the generic node numbers + * for this. Note that num_cnodes is incremented below as TIOs or + * headless/memoryless nodes are discovered. + */ + num_cnodes = num_online_nodes(); - while (brd) { - sn_cnodeid_to_nasid[numionodes] = brd->brd_nasid; - physical_node_map[brd->brd_nasid] = numionodes; - root_lboard[numionodes] = brd; - numionodes++; - brd = KLCF_NEXT_ANY(brd); - if (!brd) - break; - - brd = find_lboard_any(brd, KLTYPE_SNIA); - } - } + /* fakeprom does not support klgraph */ + if (IS_RUNNING_ON_FAKE_PROM()) + return; - /* Scan for TIO nodes. */ - for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) { - /* if there's no nasid, don't try to read the klconfig on the node */ - if (physical_node_map[nasid] == -1) - continue; - brd = find_lboard_any((lboard_t *) - root_lboard[nasid_to_cnodeid(nasid)], - KLTYPE_TIO); + /* Find TIOs & headless/memoryless nodes and add them to the tables */ + for_each_online_node(node) { + kl_config_hdr_t *klgraph_header; + nasid = cnodeid_to_nasid(node); + if ((klgraph_header = ia64_sn_get_klconfig_addr(nasid)) == NULL) + BUG(); + brd = NODE_OFFSET_TO_LBOARD(nasid, klgraph_header->ch_board_info); while (brd) { - sn_cnodeid_to_nasid[numionodes] = brd->brd_nasid; - physical_node_map[brd->brd_nasid] = numionodes; - root_lboard[numionodes] = brd; - numionodes++; - brd = KLCF_NEXT_ANY(brd); - if (!brd) - break; - - brd = find_lboard_any(brd, KLTYPE_TIO); + if (board_needs_cnode(brd->brd_type) && physical_node_map[brd->brd_nasid] < 0) { + sn_cnodeid_to_nasid[num_cnodes] = brd->brd_nasid; + physical_node_map[brd->brd_nasid] = num_cnodes++; + } + brd = find_lboard_next(brd); } } } @@ -651,3 +592,12 @@ nasid_slice_to_cpuid(int nasid, int slice) return -1; } + +int sn_prom_feature_available(int id) +{ + if (id >= BITS_PER_LONG * MAX_PROM_FEATURE_SETS) + return 0; + return test_bit(id, sn_prom_features); +} +EXPORT_SYMBOL(sn_prom_feature_available); + diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c index 0513aac..6c6fbca 100644 --- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c +++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c @@ -476,8 +476,8 @@ static int sn_topology_show(struct seq_file *s, void *d) for_each_online_cpu(j) { seq_printf(s, j ? ":%d" : ", dist %d", node_distance( - cpuid_to_cnodeid(i), - cpuid_to_cnodeid(j))); + cpu_to_node(i), + cpu_to_node(j))); } seq_putc(s, '\n'); } diff --git a/arch/ia64/sn/kernel/sn2/sn_proc_fs.c b/arch/ia64/sn/kernel/sn2/sn_proc_fs.c index 51bf827..a06719d 100644 --- a/arch/ia64/sn/kernel/sn2/sn_proc_fs.c +++ b/arch/ia64/sn/kernel/sn2/sn_proc_fs.c @@ -52,7 +52,7 @@ static int licenseID_open(struct inode *inode, struct file *file) * the bridge chip. The hardware will then send an interrupt message if the * interrupt line is active. This mimics a level sensitive interrupt. */ -int sn_force_interrupt_flag = 1; +extern int sn_force_interrupt_flag; static int sn_force_interrupt_show(struct seq_file *s, void *p) { diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c index 254fe15..0d8592a 100644 --- a/arch/ia64/sn/kernel/tiocx.c +++ b/arch/ia64/sn/kernel/tiocx.c @@ -183,15 +183,16 @@ int cx_driver_unregister(struct cx_drv *cx_driver) * @part_num: device's part number * @mfg_num: device's manufacturer number * @hubdev: hub info associated with this device + * @bt: board type of the device * */ int cx_device_register(nasid_t nasid, int part_num, int mfg_num, - struct hubdev_info *hubdev) + struct hubdev_info *hubdev, int bt) { struct cx_dev *cx_dev; - cx_dev = kcalloc(1, sizeof(struct cx_dev), GFP_KERNEL); + cx_dev = kzalloc(sizeof(struct cx_dev), GFP_KERNEL); DBG("cx_dev= 0x%p\n", cx_dev); if (cx_dev == NULL) return -ENOMEM; @@ -200,6 +201,7 @@ cx_device_register(nasid_t nasid, int part_num, int mfg_num, cx_dev->cx_id.mfg_num = mfg_num; cx_dev->cx_id.nasid = nasid; cx_dev->hubdev = hubdev; + cx_dev->bt = bt; cx_dev->dev.parent = NULL; cx_dev->dev.bus = &tiocx_bus_type; @@ -238,7 +240,8 @@ static int cx_device_reload(struct cx_dev *cx_dev) { cx_device_unregister(cx_dev); return cx_device_register(cx_dev->cx_id.nasid, cx_dev->cx_id.part_num, - cx_dev->cx_id.mfg_num, cx_dev->hubdev); + cx_dev->cx_id.mfg_num, cx_dev->hubdev, + cx_dev->bt); } static inline uint64_t tiocx_intr_alloc(nasid_t nasid, int widget, @@ -365,26 +368,20 @@ static void tio_corelet_reset(nasid_t nasid, int corelet) udelay(2000); } -static int tiocx_btchar_get(int nasid) +static int is_fpga_tio(int nasid, int *bt) { - moduleid_t module_id; - geoid_t geoid; - int cnodeid; - - cnodeid = nasid_to_cnodeid(nasid); - geoid = cnodeid_get_geoid(cnodeid); - module_id = geo_module(geoid); - return MODULE_GET_BTCHAR(module_id); -} + int ioboard_type; -static int is_fpga_brick(int nasid) -{ - switch (tiocx_btchar_get(nasid)) { + ioboard_type = ia64_sn_sysctl_ioboard_get(nasid); + + switch (ioboard_type) { case L1_BRICKTYPE_SA: case L1_BRICKTYPE_ATHENA: - case L1_BRICKTYPE_DAYTONA: + case L1_BOARDTYPE_DAYTONA: + *bt = ioboard_type; return 1; } + return 0; } @@ -407,16 +404,22 @@ static int tiocx_reload(struct cx_dev *cx_dev) if (bitstream_loaded(nasid)) { uint64_t cx_id; - - cx_id = - *(volatile uint64_t *)(TIO_SWIN_BASE(nasid, TIOCX_CORELET) + + int rv; + + rv = ia64_sn_sysctl_tio_clock_reset(nasid); + if (rv) { + printk(KERN_ALERT "CX port JTAG reset failed.\n"); + } else { + cx_id = *(volatile uint64_t *) + (TIO_SWIN_BASE(nasid, TIOCX_CORELET) + WIDGET_ID); - part_num = XWIDGET_PART_NUM(cx_id); - mfg_num = XWIDGET_MFG_NUM(cx_id); - DBG("part= 0x%x, mfg= 0x%x\n", part_num, mfg_num); - /* just ignore it if it's a CE */ - if (part_num == TIO_CE_ASIC_PARTNUM) - return 0; + part_num = XWIDGET_PART_NUM(cx_id); + mfg_num = XWIDGET_MFG_NUM(cx_id); + DBG("part= 0x%x, mfg= 0x%x\n", part_num, mfg_num); + /* just ignore it if it's a CE */ + if (part_num == TIO_CE_ASIC_PARTNUM) + return 0; + } } cx_dev->cx_id.part_num = part_num; @@ -436,10 +439,10 @@ static ssize_t show_cxdev_control(struct device *dev, struct device_attribute *a { struct cx_dev *cx_dev = to_cx_dev(dev); - return sprintf(buf, "0x%x 0x%x 0x%x %d\n", + return sprintf(buf, "0x%x 0x%x 0x%x 0x%x\n", cx_dev->cx_id.nasid, cx_dev->cx_id.part_num, cx_dev->cx_id.mfg_num, - tiocx_btchar_get(cx_dev->cx_id.nasid)); + cx_dev->bt); } static ssize_t store_cxdev_control(struct device *dev, struct device_attribute *attr, const char *buf, @@ -486,13 +489,13 @@ static int __init tiocx_init(void) bus_register(&tiocx_bus_type); - for (cnodeid = 0; cnodeid < MAX_COMPACT_NODES; cnodeid++) { + for (cnodeid = 0; cnodeid < num_cnodes; cnodeid++) { nasid_t nasid; + int bt; - if ((nasid = cnodeid_to_nasid(cnodeid)) < 0) - break; /* No more nasids .. bail out of loop */ + nasid = cnodeid_to_nasid(cnodeid); - if ((nasid & 0x1) && is_fpga_brick(nasid)) { + if ((nasid & 0x1) && is_fpga_tio(nasid, &bt)) { struct hubdev_info *hubdev; struct xwidget_info *widgetp; @@ -512,7 +515,7 @@ static int __init tiocx_init(void) if (cx_device_register (nasid, widgetp->xwi_hwid.part_num, - widgetp->xwi_hwid.mfg_num, hubdev) < 0) + widgetp->xwi_hwid.mfg_num, hubdev, bt) < 0) return -ENXIO; else found_tiocx_device++; diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c index 38f2c69..cece3c7 100644 --- a/arch/ia64/sn/kernel/xpc_main.c +++ b/arch/ia64/sn/kernel/xpc_main.c @@ -1047,6 +1047,10 @@ xpc_init(void) pid_t pid; + if (!ia64_platform_is("sn2")) { + return -ENODEV; + } + /* * xpc_remote_copy_buffer is used as a temporary buffer for bte_copy'ng * various portions of a partition's reserved page. Its size is based diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c index ce5a37f..581e113 100644 --- a/arch/ia64/sn/kernel/xpc_partition.c +++ b/arch/ia64/sn/kernel/xpc_partition.c @@ -44,7 +44,7 @@ static u64 xpc_sh2_IPI_access3; /* original protection values for each node */ -u64 xpc_prot_vec[MAX_COMPACT_NODES]; +u64 xpc_prot_vec[MAX_NUMNODES]; /* this partition's reserved page pointers */ diff --git a/arch/ia64/sn/kernel/xpnet.c b/arch/ia64/sn/kernel/xpnet.c index 78c13d6..e5c6d3c 100644 --- a/arch/ia64/sn/kernel/xpnet.c +++ b/arch/ia64/sn/kernel/xpnet.c @@ -130,7 +130,7 @@ struct net_device *xpnet_device; */ static u64 xpnet_broadcast_partitions; /* protect above */ -static spinlock_t xpnet_broadcast_lock = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(xpnet_broadcast_lock); /* * Since the Block Transfer Engine (BTE) is being used for the transfer @@ -636,6 +636,10 @@ xpnet_init(void) int result = -ENOMEM; + if (!ia64_platform_is("sn2")) { + return -ENODEV; + } + dev_info(xpnet, "registering network device %s\n", XPNET_DEVICE_NAME); /* diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c index 0e4b9ad..abdf6ee 100644 --- a/arch/ia64/sn/pci/pci_dma.c +++ b/arch/ia64/sn/pci/pci_dma.c @@ -326,6 +326,29 @@ int sn_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size) { unsigned long addr; int ret; + struct ia64_sal_retval isrv; + + /* + * First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work + * around hw issues at the pci bus level. SGI proms older than + * 4.10 don't implment this. + */ + + SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE, + pci_domain_nr(bus), bus->number, + 0, /* io */ + 0, /* read */ + port, size, __pa(val)); + + if (isrv.status == 0) + return size; + + /* + * If the above failed, retry using the SAL_PROBE call which should + * be present in all proms (but which cannot work round PCI chipset + * bugs). This code is retained for compatability with old + * pre-4.10 proms, and should be removed at some point in the future. + */ if (!SN_PCIBUS_BUSSOFT(bus)) return -ENODEV; @@ -349,6 +372,29 @@ int sn_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size) int ret = size; unsigned long paddr; unsigned long *addr; + struct ia64_sal_retval isrv; + + /* + * First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work + * around hw issues at the pci bus level. SGI proms older than + * 4.10 don't implment this. + */ + + SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE, + pci_domain_nr(bus), bus->number, + 0, /* io */ + 1, /* write */ + port, size, __pa(&val)); + + if (isrv.status == 0) + return size; + + /* + * If the above failed, retry using the SAL_PROBE call which should + * be present in all proms (but which cannot work round PCI chipset + * bugs). This code is retained for compatability with old + * pre-4.10 proms, and should be removed at some point in the future. + */ if (!SN_PCIBUS_BUSSOFT(bus)) { ret = -ENODEV; diff --git a/arch/ia64/sn/pci/pcibr/pcibr_reg.c b/arch/ia64/sn/pci/pcibr/pcibr_reg.c index 21426d0..4f718c3 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_reg.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_reg.c @@ -8,6 +8,7 @@ #include <linux/interrupt.h> #include <linux/types.h> +#include <asm/sn/io.h> #include <asm/sn/pcibr_provider.h> #include <asm/sn/pcibus_provider_defs.h> #include <asm/sn/pcidev.h> @@ -29,10 +30,10 @@ void pcireg_control_bit_clr(struct pcibus_info *pcibus_info, uint64_t bits) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ptr->tio.cp_control &= ~bits; + __sn_clrq_relaxed(&ptr->tio.cp_control, bits); break; case PCIBR_BRIDGETYPE_PIC: - ptr->pic.p_wid_control &= ~bits; + __sn_clrq_relaxed(&ptr->pic.p_wid_control, bits); break; default: panic @@ -49,10 +50,10 @@ void pcireg_control_bit_set(struct pcibus_info *pcibus_info, uint64_t bits) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ptr->tio.cp_control |= bits; + __sn_setq_relaxed(&ptr->tio.cp_control, bits); break; case PCIBR_BRIDGETYPE_PIC: - ptr->pic.p_wid_control |= bits; + __sn_setq_relaxed(&ptr->pic.p_wid_control, bits); break; default: panic @@ -73,10 +74,10 @@ uint64_t pcireg_tflush_get(struct pcibus_info *pcibus_info) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ret = ptr->tio.cp_tflush; + ret = __sn_readq_relaxed(&ptr->tio.cp_tflush); break; case PCIBR_BRIDGETYPE_PIC: - ret = ptr->pic.p_wid_tflush; + ret = __sn_readq_relaxed(&ptr->pic.p_wid_tflush); break; default: panic @@ -103,10 +104,10 @@ uint64_t pcireg_intr_status_get(struct pcibus_info * pcibus_info) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ret = ptr->tio.cp_int_status; + ret = __sn_readq_relaxed(&ptr->tio.cp_int_status); break; case PCIBR_BRIDGETYPE_PIC: - ret = ptr->pic.p_int_status; + ret = __sn_readq_relaxed(&ptr->pic.p_int_status); break; default: panic @@ -127,10 +128,10 @@ void pcireg_intr_enable_bit_clr(struct pcibus_info *pcibus_info, uint64_t bits) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ptr->tio.cp_int_enable &= ~bits; + __sn_clrq_relaxed(&ptr->tio.cp_int_enable, bits); break; case PCIBR_BRIDGETYPE_PIC: - ptr->pic.p_int_enable &= ~bits; + __sn_clrq_relaxed(&ptr->pic.p_int_enable, ~bits); break; default: panic @@ -147,10 +148,10 @@ void pcireg_intr_enable_bit_set(struct pcibus_info *pcibus_info, uint64_t bits) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ptr->tio.cp_int_enable |= bits; + __sn_setq_relaxed(&ptr->tio.cp_int_enable, bits); break; case PCIBR_BRIDGETYPE_PIC: - ptr->pic.p_int_enable |= bits; + __sn_setq_relaxed(&ptr->pic.p_int_enable, bits); break; default: panic @@ -171,14 +172,16 @@ void pcireg_intr_addr_addr_set(struct pcibus_info *pcibus_info, int int_n, if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ptr->tio.cp_int_addr[int_n] &= ~TIOCP_HOST_INTR_ADDR; - ptr->tio.cp_int_addr[int_n] |= - (addr & TIOCP_HOST_INTR_ADDR); + __sn_clrq_relaxed(&ptr->tio.cp_int_addr[int_n], + TIOCP_HOST_INTR_ADDR); + __sn_setq_relaxed(&ptr->tio.cp_int_addr[int_n], + (addr & TIOCP_HOST_INTR_ADDR)); break; case PCIBR_BRIDGETYPE_PIC: - ptr->pic.p_int_addr[int_n] &= ~PIC_HOST_INTR_ADDR; - ptr->pic.p_int_addr[int_n] |= - (addr & PIC_HOST_INTR_ADDR); + __sn_clrq_relaxed(&ptr->pic.p_int_addr[int_n], + PIC_HOST_INTR_ADDR); + __sn_setq_relaxed(&ptr->pic.p_int_addr[int_n], + (addr & PIC_HOST_INTR_ADDR)); break; default: panic @@ -198,10 +201,10 @@ void pcireg_force_intr_set(struct pcibus_info *pcibus_info, int int_n) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ptr->tio.cp_force_pin[int_n] = 1; + writeq(1, &ptr->tio.cp_force_pin[int_n]); break; case PCIBR_BRIDGETYPE_PIC: - ptr->pic.p_force_pin[int_n] = 1; + writeq(1, &ptr->pic.p_force_pin[int_n]); break; default: panic @@ -222,10 +225,12 @@ uint64_t pcireg_wrb_flush_get(struct pcibus_info *pcibus_info, int device) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ret = ptr->tio.cp_wr_req_buf[device]; + ret = + __sn_readq_relaxed(&ptr->tio.cp_wr_req_buf[device]); break; case PCIBR_BRIDGETYPE_PIC: - ret = ptr->pic.p_wr_req_buf[device]; + ret = + __sn_readq_relaxed(&ptr->pic.p_wr_req_buf[device]); break; default: panic("pcireg_wrb_flush_get: unknown bridgetype bridge 0x%p", (void *)ptr); @@ -244,10 +249,10 @@ void pcireg_int_ate_set(struct pcibus_info *pcibus_info, int ate_index, if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ptr->tio.cp_int_ate_ram[ate_index] = (uint64_t) val; + writeq(val, &ptr->tio.cp_int_ate_ram[ate_index]); break; case PCIBR_BRIDGETYPE_PIC: - ptr->pic.p_int_ate_ram[ate_index] = (uint64_t) val; + writeq(val, &ptr->pic.p_int_ate_ram[ate_index]); break; default: panic @@ -265,12 +270,10 @@ uint64_t *pcireg_int_ate_addr(struct pcibus_info *pcibus_info, int ate_index) if (pcibus_info) { switch (pcibus_info->pbi_bridge_type) { case PCIBR_BRIDGETYPE_TIOCP: - ret = - (uint64_t *) & (ptr->tio.cp_int_ate_ram[ate_index]); + ret = &ptr->tio.cp_int_ate_ram[ate_index]; break; case PCIBR_BRIDGETYPE_PIC: - ret = - (uint64_t *) & (ptr->pic.p_int_ate_ram[ate_index]); + ret = &ptr->pic.p_int_ate_ram[ate_index]; break; default: panic diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c index ea09c12f..46b646a 100644 --- a/arch/ia64/sn/pci/tioca_provider.c +++ b/arch/ia64/sn/pci/tioca_provider.c @@ -11,6 +11,7 @@ #include <linux/pci.h> #include <asm/sn/sn_sal.h> #include <asm/sn/addrs.h> +#include <asm/sn/io.h> #include <asm/sn/pcidev.h> #include <asm/sn/pcibus_provider_defs.h> #include <asm/sn/tioca_provider.h> @@ -37,7 +38,7 @@ tioca_gart_init(struct tioca_kernel *tioca_kern) uint64_t offset; struct page *tmp; struct tioca_common *tioca_common; - volatile struct tioca *ca_base; + struct tioca *ca_base; tioca_common = tioca_kern->ca_common; ca_base = (struct tioca *)tioca_common->ca_common.bs_base; @@ -148,7 +149,7 @@ tioca_gart_init(struct tioca_kernel *tioca_kern) tioca_kern->ca_pcigart_entries = tioca_kern->ca_pciap_size / tioca_kern->ca_ap_pagesize; tioca_kern->ca_pcigart_pagemap = - kcalloc(1, tioca_kern->ca_pcigart_entries / 8, GFP_KERNEL); + kzalloc(tioca_kern->ca_pcigart_entries / 8, GFP_KERNEL); if (!tioca_kern->ca_pcigart_pagemap) { free_pages((unsigned long)tioca_kern->ca_gart, get_order(tioca_kern->ca_gart_size)); @@ -174,27 +175,29 @@ tioca_gart_init(struct tioca_kernel *tioca_kern) * DISABLE GART PREFETCHING due to hw bug tracked in SGI PV930029 */ - ca_base->ca_control1 |= CA_AGPDMA_OP_ENB_COMBDELAY; /* PV895469 ? */ - ca_base->ca_control2 &= ~(CA_GART_MEM_PARAM); - ca_base->ca_control2 |= (0x2ull << CA_GART_MEM_PARAM_SHFT); + __sn_setq_relaxed(&ca_base->ca_control1, + CA_AGPDMA_OP_ENB_COMBDELAY); /* PV895469 ? */ + __sn_clrq_relaxed(&ca_base->ca_control2, CA_GART_MEM_PARAM); + __sn_setq_relaxed(&ca_base->ca_control2, + (0x2ull << CA_GART_MEM_PARAM_SHFT)); tioca_kern->ca_gart_iscoherent = 1; - ca_base->ca_control2 &= - ~(CA_GART_WR_PREFETCH_ENB | CA_GART_RD_PREFETCH_ENB); + __sn_clrq_relaxed(&ca_base->ca_control2, + (CA_GART_WR_PREFETCH_ENB | CA_GART_RD_PREFETCH_ENB)); /* * Unmask GART fetch error interrupts. Clear residual errors first. */ - ca_base->ca_int_status_alias = CA_GART_FETCH_ERR; - ca_base->ca_mult_error_alias = CA_GART_FETCH_ERR; - ca_base->ca_int_mask &= ~CA_GART_FETCH_ERR; + writeq(CA_GART_FETCH_ERR, &ca_base->ca_int_status_alias); + writeq(CA_GART_FETCH_ERR, &ca_base->ca_mult_error_alias); + __sn_clrq_relaxed(&ca_base->ca_int_mask, CA_GART_FETCH_ERR); /* * Program the aperature and gart registers in TIOCA */ - ca_base->ca_gart_aperature = ap_reg; - ca_base->ca_gart_ptr_table = tioca_kern->ca_gart_coretalk_addr | 1; + writeq(ap_reg, &ca_base->ca_gart_aperature); + writeq(tioca_kern->ca_gart_coretalk_addr|1, &ca_base->ca_gart_ptr_table); return 0; } @@ -211,7 +214,6 @@ void tioca_fastwrite_enable(struct tioca_kernel *tioca_kern) { int cap_ptr; - uint64_t ca_control1; uint32_t reg; struct tioca *tioca_base; struct pci_dev *pdev; @@ -256,9 +258,7 @@ tioca_fastwrite_enable(struct tioca_kernel *tioca_kern) */ tioca_base = (struct tioca *)common->ca_common.bs_base; - ca_control1 = tioca_base->ca_control1; - ca_control1 |= CA_AGP_FW_ENABLE; - tioca_base->ca_control1 = ca_control1; + __sn_setq_relaxed(&tioca_base->ca_control1, CA_AGP_FW_ENABLE); } EXPORT_SYMBOL(tioca_fastwrite_enable); /* used by agp-sgi */ @@ -345,7 +345,7 @@ tioca_dma_d48(struct pci_dev *pdev, uint64_t paddr) return 0; } - agp_dma_extn = ca_base->ca_agp_dma_addr_extn; + agp_dma_extn = __sn_readq_relaxed(&ca_base->ca_agp_dma_addr_extn); if (node_upper != (agp_dma_extn >> CA_AGP_DMA_NODE_ID_SHFT)) { printk(KERN_ERR "%s: coretalk upper node (%u) " "mismatch with ca_agp_dma_addr_extn (%lu)\n", @@ -392,7 +392,7 @@ tioca_dma_mapped(struct pci_dev *pdev, uint64_t paddr, size_t req_size) * allocate a map struct */ - ca_dmamap = kcalloc(1, sizeof(struct tioca_dmamap), GFP_ATOMIC); + ca_dmamap = kzalloc(sizeof(struct tioca_dmamap), GFP_ATOMIC); if (!ca_dmamap) goto map_return; @@ -600,7 +600,7 @@ tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont * Allocate kernel bus soft and copy from prom. */ - tioca_common = kcalloc(1, sizeof(struct tioca_common), GFP_KERNEL); + tioca_common = kzalloc(sizeof(struct tioca_common), GFP_KERNEL); if (!tioca_common) return NULL; @@ -609,7 +609,7 @@ tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont /* init kernel-private area */ - tioca_kern = kcalloc(1, sizeof(struct tioca_kernel), GFP_KERNEL); + tioca_kern = kzalloc(sizeof(struct tioca_kernel), GFP_KERNEL); if (!tioca_kern) { kfree(tioca_common); return NULL; diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c index 8e75db2..9f03d4e 100644 --- a/arch/ia64/sn/pci/tioce_provider.c +++ b/arch/ia64/sn/pci/tioce_provider.c @@ -11,6 +11,7 @@ #include <linux/pci.h> #include <asm/sn/sn_sal.h> #include <asm/sn/addrs.h> +#include <asm/sn/io.h> #include <asm/sn/pcidev.h> #include <asm/sn/pcibus_provider_defs.h> #include <asm/sn/tioce_provider.h> @@ -227,7 +228,7 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port, ate = ATE_MAKE(addr, pagesize); ate_shadow[i + j] = ate; - ate_reg[i + j] = ate; + writeq(ate, &ate_reg[i + j]); addr += pagesize; } @@ -268,10 +269,10 @@ tioce_dma_d32(struct pci_dev *pdev, uint64_t ct_addr) pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port); if (ce_kern->ce_port[port].dirmap_refcnt == 0) { - volatile uint64_t tmp; + uint64_t tmp; ce_kern->ce_port[port].dirmap_shadow = ct_upper; - ce_mmr->ce_ure_dir_map[port] = ct_upper; + writeq(ct_upper, &ce_mmr->ce_ure_dir_map[port]); tmp = ce_mmr->ce_ure_dir_map[port]; dma_ok = 1; } else @@ -343,7 +344,7 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir) if (TIOCE_D32_ADDR(bus_addr)) { if (--ce_kern->ce_port[port].dirmap_refcnt == 0) { ce_kern->ce_port[port].dirmap_shadow = 0; - ce_mmr->ce_ure_dir_map[port] = 0; + writeq(0, &ce_mmr->ce_ure_dir_map[port]); } } else { struct tioce_dmamap *map; @@ -582,18 +583,18 @@ tioce_kern_init(struct tioce_common *tioce_common) */ tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base; - tioce_mmr->ce_ure_page_map &= ~CE_URE_PAGESIZE_MASK; - tioce_mmr->ce_ure_page_map |= CE_URE_256K_PAGESIZE; + __sn_clrq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_PAGESIZE_MASK); + __sn_setq_relaxed(&tioce_mmr->ce_ure_page_map, CE_URE_256K_PAGESIZE); tioce_kern->ce_ate3240_pagesize = KB(256); for (i = 0; i < TIOCE_NUM_M40_ATES; i++) { tioce_kern->ce_ate40_shadow[i] = 0; - tioce_mmr->ce_ure_ate40[i] = 0; + writeq(0, &tioce_mmr->ce_ure_ate40[i]); } for (i = 0; i < TIOCE_NUM_M3240_ATES; i++) { tioce_kern->ce_ate3240_shadow[i] = 0; - tioce_mmr->ce_ure_ate3240[i] = 0; + writeq(0, &tioce_mmr->ce_ure_ate3240[i]); } return tioce_kern; @@ -665,7 +666,7 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info) default: return; } - ce_mmr->ce_adm_force_int = force_int_val; + writeq(force_int_val, &ce_mmr->ce_adm_force_int); } /** @@ -686,6 +687,7 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info) struct tioce_common *ce_common; struct tioce *ce_mmr; int bit; + uint64_t vector; pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo; if (!pcidev_info) @@ -696,11 +698,11 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info) bit = sn_irq_info->irq_int_bit; - ce_mmr->ce_adm_int_mask |= (1UL << bit); - ce_mmr->ce_adm_int_dest[bit] = - ((uint64_t)sn_irq_info->irq_irq << INTR_VECTOR_SHFT) | - sn_irq_info->irq_xtalkaddr; - ce_mmr->ce_adm_int_mask &= ~(1UL << bit); + __sn_setq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit)); + vector = (uint64_t)sn_irq_info->irq_irq << INTR_VECTOR_SHFT; + vector |= sn_irq_info->irq_xtalkaddr; + writeq(vector, &ce_mmr->ce_adm_int_dest[bit]); + __sn_clrq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit)); tioce_force_interrupt(sn_irq_info); } |
