diff options
Diffstat (limited to 'arch/ia64/sn/pci/pcibr/pcibr_dma.c')
-rw-r--r-- | arch/ia64/sn/pci/pcibr/pcibr_dma.c | 379 |
1 files changed, 379 insertions, 0 deletions
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_dma.c b/arch/ia64/sn/pci/pcibr/pcibr_dma.c new file mode 100644 index 0000000..b1d66ac --- /dev/null +++ b/arch/ia64/sn/pci/pcibr/pcibr_dma.c @@ -0,0 +1,379 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001-2004 Silicon Graphics, Inc. All rights reserved. + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <asm/sn/sn_sal.h> +#include <asm/sn/geo.h> +#include "xtalk/xwidgetdev.h" +#include "xtalk/hubdev.h" +#include "pci/pcibus_provider_defs.h" +#include "pci/pcidev.h" +#include "pci/tiocp.h" +#include "pci/pic.h" +#include "pci/pcibr_provider.h" +#include "pci/tiocp.h" +#include "tio.h" +#include <asm/sn/addrs.h> + +extern int sn_ioif_inited; + +/* ===================================================================== + * DMA MANAGEMENT + * + * The Bridge ASIC provides three methods of doing DMA: via a "direct map" + * register available in 32-bit PCI space (which selects a contiguous 2G + * address space on some other widget), via "direct" addressing via 64-bit + * PCI space (all destination information comes from the PCI address, + * including transfer attributes), and via a "mapped" region that allows + * a bunch of different small mappings to be established with the PMU. + * + * For efficiency, we most prefer to use the 32bit direct mapping facility, + * since it requires no resource allocations. The advantage of using the + * PMU over the 64-bit direct is that single-cycle PCI addressing can be + * used; the advantage of using 64-bit direct over PMU addressing is that + * we do not have to allocate entries in the PMU. + */ + +static uint64_t +pcibr_dmamap_ate32(struct pcidev_info *info, + uint64_t paddr, size_t req_size, uint64_t flags) +{ + + struct pcidev_info *pcidev_info = info->pdi_host_pcidev_info; + struct pcibus_info *pcibus_info = (struct pcibus_info *)pcidev_info-> + pdi_pcibus_info; + uint8_t internal_device = (PCI_SLOT(pcidev_info->pdi_host_pcidev_info-> + pdi_linux_pcidev->devfn)) - 1; + int ate_count; + int ate_index; + uint64_t ate_flags = flags | PCI32_ATE_V; + uint64_t ate; + uint64_t pci_addr; + uint64_t xio_addr; + uint64_t offset; + + /* PIC in PCI-X mode does not supports 32bit PageMap mode */ + if (IS_PIC_SOFT(pcibus_info) && IS_PCIX(pcibus_info)) { + return 0; + } + + /* Calculate the number of ATEs needed. */ + if (!(MINIMAL_ATE_FLAG(paddr, req_size))) { + ate_count = IOPG((IOPGSIZE - 1) /* worst case start offset */ + +req_size /* max mapping bytes */ + - 1) + 1; /* round UP */ + } else { /* assume requested target is page aligned */ + ate_count = IOPG(req_size /* max mapping bytes */ + - 1) + 1; /* round UP */ + } + + /* Get the number of ATEs required. */ + ate_index = pcibr_ate_alloc(pcibus_info, ate_count); + if (ate_index < 0) + return 0; + + /* In PCI-X mode, Prefetch not supported */ + if (IS_PCIX(pcibus_info)) + ate_flags &= ~(PCI32_ATE_PREF); + + xio_addr = + IS_PIC_SOFT(pcibus_info) ? PHYS_TO_DMA(paddr) : + PHYS_TO_TIODMA(paddr); + offset = IOPGOFF(xio_addr); + ate = ate_flags | (xio_addr - offset); + + /* If PIC, put the targetid in the ATE */ + if (IS_PIC_SOFT(pcibus_info)) { + ate |= (pcibus_info->pbi_hub_xid << PIC_ATE_TARGETID_SHFT); + } + ate_write(pcibus_info, ate_index, ate_count, ate); + + /* + * Set up the DMA mapped Address. + */ + pci_addr = PCI32_MAPPED_BASE + offset + IOPGSIZE * ate_index; + + /* + * If swap was set in device in pcibr_endian_set() + * we need to turn swapping on. + */ + if (pcibus_info->pbi_devreg[internal_device] & PCIBR_DEV_SWAP_DIR) + ATE_SWAP_ON(pci_addr); + + return pci_addr; +} + +static uint64_t +pcibr_dmatrans_direct64(struct pcidev_info * info, uint64_t paddr, + uint64_t dma_attributes) +{ + struct pcibus_info *pcibus_info = (struct pcibus_info *) + ((info->pdi_host_pcidev_info)->pdi_pcibus_info); + uint64_t pci_addr; + + /* Translate to Crosstalk View of Physical Address */ + pci_addr = (IS_PIC_SOFT(pcibus_info) ? PHYS_TO_DMA(paddr) : + PHYS_TO_TIODMA(paddr)) | dma_attributes; + + /* Handle Bus mode */ + if (IS_PCIX(pcibus_info)) + pci_addr &= ~PCI64_ATTR_PREF; + + /* Handle Bridge Chipset differences */ + if (IS_PIC_SOFT(pcibus_info)) { + pci_addr |= + ((uint64_t) pcibus_info-> + pbi_hub_xid << PIC_PCI64_ATTR_TARG_SHFT); + } else + pci_addr |= TIOCP_PCI64_CMDTYPE_MEM; + + /* If PCI mode, func zero uses VCHAN0, every other func uses VCHAN1 */ + if (!IS_PCIX(pcibus_info) && PCI_FUNC(info->pdi_linux_pcidev->devfn)) + pci_addr |= PCI64_ATTR_VIRTUAL; + + return pci_addr; + +} + +static uint64_t +pcibr_dmatrans_direct32(struct pcidev_info * info, + uint64_t paddr, size_t req_size, uint64_t flags) +{ + + struct pcidev_info *pcidev_info = info->pdi_host_pcidev_info; + struct pcibus_info *pcibus_info = (struct pcibus_info *)pcidev_info-> + pdi_pcibus_info; + uint64_t xio_addr; + + uint64_t xio_base; + uint64_t offset; + uint64_t endoff; + + if (IS_PCIX(pcibus_info)) { + return 0; + } + + xio_addr = IS_PIC_SOFT(pcibus_info) ? PHYS_TO_DMA(paddr) : + PHYS_TO_TIODMA(paddr); + + xio_base = pcibus_info->pbi_dir_xbase; + offset = xio_addr - xio_base; + endoff = req_size + offset; + if ((req_size > (1ULL << 31)) || /* Too Big */ + (xio_addr < xio_base) || /* Out of range for mappings */ + (endoff > (1ULL << 31))) { /* Too Big */ + return 0; + } + + return PCI32_DIRECT_BASE | offset; + +} + +/* + * Wrapper routine for free'ing DMA maps + * DMA mappings for Direct 64 and 32 do not have any DMA maps. + */ +void +pcibr_dma_unmap(struct pcidev_info *pcidev_info, dma_addr_t dma_handle, + int direction) +{ + struct pcibus_info *pcibus_info = (struct pcibus_info *)pcidev_info-> + pdi_pcibus_info; + + if (IS_PCI32_MAPPED(dma_handle)) { + int ate_index; + + ate_index = + IOPG((ATE_SWAP_OFF(dma_handle) - PCI32_MAPPED_BASE)); + pcibr_ate_free(pcibus_info, ate_index); + } +} + +/* + * On SN systems there is a race condition between a PIO read response and + * DMA's. In rare cases, the read response may beat the DMA, causing the + * driver to think that data in memory is complete and meaningful. This code + * eliminates that race. This routine is called by the PIO read routines + * after doing the read. For PIC this routine then forces a fake interrupt + * on another line, which is logically associated with the slot that the PIO + * is addressed to. It then spins while watching the memory location that + * the interrupt is targetted to. When the interrupt response arrives, we + * are sure that the DMA has landed in memory and it is safe for the driver + * to proceed. For TIOCP use the Device(x) Write Request Buffer Flush + * Bridge register since it ensures the data has entered the coherence domain, + * unlike the PIC Device(x) Write Request Buffer Flush register. + */ + +void sn_dma_flush(uint64_t addr) +{ + nasid_t nasid; + int is_tio; + int wid_num; + int i, j; + int bwin; + uint64_t flags; + struct hubdev_info *hubinfo; + volatile struct sn_flush_device_list *p; + struct sn_flush_nasid_entry *flush_nasid_list; + + if (!sn_ioif_inited) + return; + + nasid = NASID_GET(addr); + if (-1 == nasid_to_cnodeid(nasid)) + return; + + hubinfo = (NODEPDA(nasid_to_cnodeid(nasid)))->pdinfo; + + if (!hubinfo) { + BUG(); + } + is_tio = (nasid & 1); + if (is_tio) { + wid_num = TIO_SWIN_WIDGETNUM(addr); + bwin = TIO_BWIN_WINDOWNUM(addr); + } else { + wid_num = SWIN_WIDGETNUM(addr); + bwin = BWIN_WINDOWNUM(addr); + } + + flush_nasid_list = &hubinfo->hdi_flush_nasid_list; + if (flush_nasid_list->widget_p == NULL) + return; + if (bwin > 0) { + uint64_t itte = flush_nasid_list->iio_itte[bwin]; + + if (is_tio) { + wid_num = (itte >> TIO_ITTE_WIDGET_SHIFT) & + TIO_ITTE_WIDGET_MASK; + } else { + wid_num = (itte >> IIO_ITTE_WIDGET_SHIFT) & + IIO_ITTE_WIDGET_MASK; + } + } + if (flush_nasid_list->widget_p == NULL) + return; + if (flush_nasid_list->widget_p[wid_num] == NULL) + return; + p = &flush_nasid_list->widget_p[wid_num][0]; + + /* find a matching BAR */ + for (i = 0; i < DEV_PER_WIDGET; i++) { + for (j = 0; j < PCI_ROM_RESOURCE; j++) { + if (p->sfdl_bar_list[j].start == 0) + break; + if (addr >= p->sfdl_bar_list[j].start + && addr <= p->sfdl_bar_list[j].end) + break; + } + if (j < PCI_ROM_RESOURCE && p->sfdl_bar_list[j].start != 0) + break; + p++; + } + + /* if no matching BAR, return without doing anything. */ + if (i == DEV_PER_WIDGET) + return; + + /* + * For TIOCP use the Device(x) Write Request Buffer Flush Bridge + * register since it ensures the data has entered the coherence + * domain, unlike PIC + */ + if (is_tio) { + uint32_t tio_id = REMOTE_HUB_L(nasid, TIO_NODE_ID); + uint32_t revnum = XWIDGET_PART_REV_NUM(tio_id); + + /* TIOCP BRINGUP WAR (PV907516): Don't write buffer flush reg */ + if ((1 << XWIDGET_PART_REV_NUM_REV(revnum)) & PV907516) { + return; + } else { + pcireg_wrb_flush_get(p->sfdl_pcibus_info, + (p->sfdl_slot - 1)); + } + } else { + spin_lock_irqsave(&((struct sn_flush_device_list *)p)-> + sfdl_flush_lock, flags); + + p->sfdl_flush_value = 0; + + /* force an interrupt. */ + *(volatile uint32_t *)(p->sfdl_force_int_addr) = 1; + + /* wait for the interrupt to come back. */ + while (*(p->sfdl_flush_addr) != 0x10f) ; + + /* okay, everything is synched up. */ + spin_unlock_irqrestore((spinlock_t *)&p->sfdl_flush_lock, flags); + } + return; +} + +/* + * Wrapper DMA interface. Called from pci_dma.c routines. + */ + +uint64_t +pcibr_dma_map(struct pcidev_info * pcidev_info, unsigned long phys_addr, + size_t size, unsigned int flags) +{ + dma_addr_t dma_handle; + struct pci_dev *pcidev = pcidev_info->pdi_linux_pcidev; + + if (flags & SN_PCIDMA_CONSISTENT) { + /* sn_pci_alloc_consistent interfaces */ + if (pcidev->dev.coherent_dma_mask == ~0UL) { + dma_handle = + pcibr_dmatrans_direct64(pcidev_info, phys_addr, + PCI64_ATTR_BAR); + } else { + dma_handle = + (dma_addr_t) pcibr_dmamap_ate32(pcidev_info, + phys_addr, size, + PCI32_ATE_BAR); + } + } else { + /* map_sg/map_single interfaces */ + + /* SN cannot support DMA addresses smaller than 32 bits. */ + if (pcidev->dma_mask < 0x7fffffff) { + return 0; + } + + if (pcidev->dma_mask == ~0UL) { + /* + * Handle the most common case: 64 bit cards. This + * call should always succeed. + */ + + dma_handle = + pcibr_dmatrans_direct64(pcidev_info, phys_addr, + PCI64_ATTR_PREF); + } else { + /* Handle 32-63 bit cards via direct mapping */ + dma_handle = + pcibr_dmatrans_direct32(pcidev_info, phys_addr, + size, 0); + if (!dma_handle) { + /* + * It is a 32 bit card and we cannot do direct mapping, + * so we use an ATE. + */ + + dma_handle = + pcibr_dmamap_ate32(pcidev_info, phys_addr, + size, PCI32_ATE_PREF); + } + } + } + + return dma_handle; +} + +EXPORT_SYMBOL(sn_dma_flush); |