diff options
Diffstat (limited to 'arch/i386/kernel/quirks.c')
-rw-r--r-- | arch/i386/kernel/quirks.c | 69 |
1 files changed, 10 insertions, 59 deletions
diff --git a/arch/i386/kernel/quirks.c b/arch/i386/kernel/quirks.c index 34874c3..9f6ab17 100644 --- a/arch/i386/kernel/quirks.c +++ b/arch/i386/kernel/quirks.c @@ -3,12 +3,10 @@ */ #include <linux/pci.h> #include <linux/irq.h> -#include <asm/pci-direct.h> -#include <asm/genapic.h> -#include <asm/cpu.h> #if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI) -static void __devinit verify_quirk_intel_irqbalance(struct pci_dev *dev) + +static void __devinit quirk_intel_irqbalance(struct pci_dev *dev) { u8 config, rev; u32 word; @@ -16,12 +14,14 @@ static void __devinit verify_quirk_intel_irqbalance(struct pci_dev *dev) /* BIOS may enable hardware IRQ balancing for * E7520/E7320/E7525(revision ID 0x9 and below) * based platforms. - * For those platforms, make sure that the genapic is set to 'flat' + * Disable SW irqbalance/affinity on those platforms. */ pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev); if (rev > 0x9) return; + printk(KERN_INFO "Intel E7520/7320/7525 detected."); + /* enable access to config space*/ pci_read_config_byte(dev, 0xf4, &config); pci_write_config_byte(dev, 0xf4, config|0x2); @@ -30,44 +30,6 @@ static void __devinit verify_quirk_intel_irqbalance(struct pci_dev *dev) raw_pci_ops->read(0, 0, 0x40, 0x4c, 2, &word); if (!(word & (1 << 13))) { -#ifdef CONFIG_X86_64 - if (genapic != &apic_flat) - panic("APIC mode must be flat on this system\n"); -#elif defined(CONFIG_X86_GENERICARCH) - if (genapic != &apic_default) - panic("APIC mode must be default(flat) on this system. Use apic=default\n"); -#endif - } - - /* put back the original value for config space*/ - if (!(config & 0x2)) - pci_write_config_byte(dev, 0xf4, config); -} - -void __init quirk_intel_irqbalance(void) -{ - u8 config, rev; - u32 word; - - /* BIOS may enable hardware IRQ balancing for - * E7520/E7320/E7525(revision ID 0x9 and below) - * based platforms. - * Disable SW irqbalance/affinity on those platforms. - */ - rev = read_pci_config_byte(0, 0, 0, PCI_CLASS_REVISION); - if (rev > 0x9) - return; - - printk(KERN_INFO "Intel E7520/7320/7525 detected."); - - /* enable access to config space */ - config = read_pci_config_byte(0, 0, 0, 0xf4); - write_pci_config_byte(0, 0, 0, 0xf4, config|0x2); - - /* read xTPR register */ - word = read_pci_config_16(0, 0, 0x40, 0x4c); - - if (!(word & (1 << 13))) { printk(KERN_INFO "Disabling irq balancing and affinity\n"); #ifdef CONFIG_IRQBALANCE irqbalance_disable(""); @@ -76,24 +38,13 @@ void __init quirk_intel_irqbalance(void) #ifdef CONFIG_PROC_FS no_irq_affinity = 1; #endif -#ifdef CONFIG_HOTPLUG_CPU - printk(KERN_INFO "Disabling cpu hotplug control\n"); - enable_cpu_hotplug = 0; -#endif -#ifdef CONFIG_X86_64 - /* force the genapic selection to flat mode so that - * interrupts can be redirected to more than one CPU. - */ - genapic_force = &apic_flat; -#endif } - /* put back the original value for config space */ + /* put back the original value for config space*/ if (!(config & 0x2)) - write_pci_config_byte(0, 0, 0, 0xf4, config); + pci_write_config_byte(dev, 0xf4, config); } -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, verify_quirk_intel_irqbalance); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, verify_quirk_intel_irqbalance); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, verify_quirk_intel_irqbalance); - +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_intel_irqbalance); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_intel_irqbalance); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_intel_irqbalance); #endif |