diff options
Diffstat (limited to 'arch/i386/kernel/cpu/cpufreq/gx-suspmod.c')
| -rw-r--r-- | arch/i386/kernel/cpu/cpufreq/gx-suspmod.c | 180 |
1 files changed, 89 insertions, 91 deletions
diff --git a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c index e86ea48..65b8fa2 100644 --- a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c +++ b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c @@ -6,12 +6,12 @@ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation + * version 2 as published by the Free Software Foundation * * The author(s) of this software shall not be held liable for damages * of any nature resulting due to the use of this software. This * software is provided AS-IS with no warranties. - * + * * Theoritical note: * * (see Geode(tm) CS5530 manual (rev.4.1) page.56) @@ -21,18 +21,18 @@ * * Suspend Modulation works by asserting and de-asserting the SUSP# pin * to CPU(GX1/GXLV) for configurable durations. When asserting SUSP# - * the CPU enters an idle state. GX1 stops its core clock when SUSP# is + * the CPU enters an idle state. GX1 stops its core clock when SUSP# is * asserted then power consumption is reduced. * - * Suspend Modulation's OFF/ON duration are configurable + * Suspend Modulation's OFF/ON duration are configurable * with 'Suspend Modulation OFF Count Register' * and 'Suspend Modulation ON Count Register'. - * These registers are 8bit counters that represent the number of + * These registers are 8bit counters that represent the number of * 32us intervals which the SUSP# pin is asserted(ON)/de-asserted(OFF) * to the processor. * - * These counters define a ratio which is the effective frequency - * of operation of the system. + * These counters define a ratio which is the effective frequency + * of operation of the system. * * OFF Count * F_eff = Fgx * ---------------------- @@ -40,24 +40,24 @@ * * 0 <= On Count, Off Count <= 255 * - * From these limits, we can get register values + * From these limits, we can get register values * * off_duration + on_duration <= MAX_DURATION * on_duration = off_duration * (stock_freq - freq) / freq * - * off_duration = (freq * DURATION) / stock_freq - * on_duration = DURATION - off_duration + * off_duration = (freq * DURATION) / stock_freq + * on_duration = DURATION - off_duration * * *--------------------------------------------------------------------------- * * ChangeLog: - * Dec. 12, 2003 Hiroshi Miura <miura@da-cha.org> - * - fix on/off register mistake - * - fix cpu_khz calc when it stops cpu modulation. + * Dec. 12, 2003 Hiroshi Miura <miura@da-cha.org> + * - fix on/off register mistake + * - fix cpu_khz calc when it stops cpu modulation. * - * Dec. 11, 2002 Hiroshi Miura <miura@da-cha.org> - * - rewrite for Cyrix MediaGX Cx5510/5520 and + * Dec. 11, 2002 Hiroshi Miura <miura@da-cha.org> + * - rewrite for Cyrix MediaGX Cx5510/5520 and * NatSemi Geode Cs5530(A). * * Jul. ??, 2002 Zwane Mwaikambo <zwane@commfireservices.com> @@ -74,40 +74,40 @@ ************************************************************************/ #include <linux/kernel.h> -#include <linux/module.h> +#include <linux/module.h> #include <linux/init.h> #include <linux/smp.h> #include <linux/cpufreq.h> #include <linux/pci.h> -#include <asm/processor.h> +#include <asm/processor.h> #include <asm/errno.h> /* PCI config registers, all at F0 */ -#define PCI_PMER1 0x80 /* power management enable register 1 */ -#define PCI_PMER2 0x81 /* power management enable register 2 */ -#define PCI_PMER3 0x82 /* power management enable register 3 */ -#define PCI_IRQTC 0x8c /* irq speedup timer counter register:typical 2 to 4ms */ -#define PCI_VIDTC 0x8d /* video speedup timer counter register: typical 50 to 100ms */ -#define PCI_MODOFF 0x94 /* suspend modulation OFF counter register, 1 = 32us */ -#define PCI_MODON 0x95 /* suspend modulation ON counter register */ -#define PCI_SUSCFG 0x96 /* suspend configuration register */ +#define PCI_PMER1 0x80 /* power management enable register 1 */ +#define PCI_PMER2 0x81 /* power management enable register 2 */ +#define PCI_PMER3 0x82 /* power management enable register 3 */ +#define PCI_IRQTC 0x8c /* irq speedup timer counter register:typical 2 to 4ms */ +#define PCI_VIDTC 0x8d /* video speedup timer counter register: typical 50 to 100ms */ +#define PCI_MODOFF 0x94 /* suspend modulation OFF counter register, 1 = 32us */ +#define PCI_MODON 0x95 /* suspend modulation ON counter register */ +#define PCI_SUSCFG 0x96 /* suspend configuration register */ /* PMER1 bits */ -#define GPM (1<<0) /* global power management */ -#define GIT (1<<1) /* globally enable PM device idle timers */ -#define GTR (1<<2) /* globally enable IO traps */ -#define IRQ_SPDUP (1<<3) /* disable clock throttle during interrupt handling */ -#define VID_SPDUP (1<<4) /* disable clock throttle during vga video handling */ +#define GPM (1<<0) /* global power management */ +#define GIT (1<<1) /* globally enable PM device idle timers */ +#define GTR (1<<2) /* globally enable IO traps */ +#define IRQ_SPDUP (1<<3) /* disable clock throttle during interrupt handling */ +#define VID_SPDUP (1<<4) /* disable clock throttle during vga video handling */ /* SUSCFG bits */ -#define SUSMOD (1<<0) /* enable/disable suspend modulation */ -/* the belows support only with cs5530 (after rev.1.2)/cs5530A */ -#define SMISPDUP (1<<1) /* select how SMI re-enable suspend modulation: */ - /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */ -#define SUSCFG (1<<2) /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */ -/* the belows support only with cs5530A */ -#define PWRSVE_ISA (1<<3) /* stop ISA clock */ -#define PWRSVE (1<<4) /* active idle */ +#define SUSMOD (1<<0) /* enable/disable suspend modulation */ +/* the belows support only with cs5530 (after rev.1.2)/cs5530A */ +#define SMISPDUP (1<<1) /* select how SMI re-enable suspend modulation: */ + /* IRQTC timer or read SMI speedup disable reg.(F1BAR[08-09h]) */ +#define SUSCFG (1<<2) /* enable powering down a GXLV processor. "Special 3Volt Suspend" mode */ +/* the belows support only with cs5530A */ +#define PWRSVE_ISA (1<<3) /* stop ISA clock */ +#define PWRSVE (1<<4) /* active idle */ struct gxfreq_params { u8 on_duration; @@ -128,7 +128,7 @@ module_param (pci_busclk, int, 0444); /* maximum duration for which the cpu may be suspended * (32us * MAX_DURATION). If no parameter is given, this defaults - * to 255. + * to 255. * Note that this leads to a maximum of 8 ms(!) where the CPU clock * is suspended -- processing power is just 0.39% of what it used to be, * though. 781.25 kHz(!) for a 200 MHz processor -- wow. */ @@ -144,17 +144,17 @@ module_param (max_duration, int, 0444); #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "gx-suspmod", msg) /** - * we can detect a core multipiler from dir0_lsb - * from GX1 datasheet p.56, - * MULT[3:0]: - * 0000 = SYSCLK multiplied by 4 (test only) - * 0001 = SYSCLK multiplied by 10 - * 0010 = SYSCLK multiplied by 4 - * 0011 = SYSCLK multiplied by 6 - * 0100 = SYSCLK multiplied by 9 - * 0101 = SYSCLK multiplied by 5 - * 0110 = SYSCLK multiplied by 7 - * 0111 = SYSCLK multiplied by 8 + * we can detect a core multipiler from dir0_lsb + * from GX1 datasheet p.56, + * MULT[3:0]: + * 0000 = SYSCLK multiplied by 4 (test only) + * 0001 = SYSCLK multiplied by 10 + * 0010 = SYSCLK multiplied by 4 + * 0011 = SYSCLK multiplied by 6 + * 0100 = SYSCLK multiplied by 9 + * 0101 = SYSCLK multiplied by 5 + * 0110 = SYSCLK multiplied by 7 + * 0111 = SYSCLK multiplied by 8 * of 33.3MHz **/ static int gx_freq_mult[16] = { @@ -164,17 +164,17 @@ static int gx_freq_mult[16] = { /**************************************************************** - * Low Level chipset interface * + * Low Level chipset interface * ****************************************************************/ static struct pci_device_id gx_chipset_tbl[] __initdata = { - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID }, - { 0, }, + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID }, + { 0, }, }; /** - * gx_detect_chipset: + * gx_detect_chipset: * **/ static __init struct pci_dev *gx_detect_chipset(void) @@ -182,17 +182,16 @@ static __init struct pci_dev *gx_detect_chipset(void) struct pci_dev *gx_pci = NULL; /* check if CPU is a MediaGX or a Geode. */ - if ((current_cpu_data.x86_vendor != X86_VENDOR_NSC) && + if ((current_cpu_data.x86_vendor != X86_VENDOR_NSC) && (current_cpu_data.x86_vendor != X86_VENDOR_CYRIX)) { dprintk("error: no MediaGX/Geode processor found!\n"); - return NULL; + return NULL; } /* detect which companion chip is used */ while ((gx_pci = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, gx_pci)) != NULL) { - if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL) { + if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL) return gx_pci; - } } dprintk("error: no supported chipset found!\n"); @@ -200,24 +199,24 @@ static __init struct pci_dev *gx_detect_chipset(void) } /** - * gx_get_cpuspeed: + * gx_get_cpuspeed: * * Finds out at which efficient frequency the Cyrix MediaGX/NatSemi Geode CPU runs. */ static unsigned int gx_get_cpuspeed(unsigned int cpu) { - if ((gx_params->pci_suscfg & SUSMOD) == 0) + if ((gx_params->pci_suscfg & SUSMOD) == 0) return stock_freq; - return (stock_freq * gx_params->off_duration) + return (stock_freq * gx_params->off_duration) / (gx_params->on_duration + gx_params->off_duration); } /** * gx_validate_speed: * determine current cpu speed - * -**/ + * + **/ static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off_duration) { @@ -230,7 +229,7 @@ static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off *on_duration=0; for (i=max_duration; i>0; i--) { - tmp_off = ((khz * i) / stock_freq) & 0xff; + tmp_off = ((khz * i) / stock_freq) & 0xff; tmp_on = i - tmp_off; tmp_freq = (stock_freq * tmp_off) / i; /* if this relation is closer to khz, use this. If it's equal, @@ -247,18 +246,17 @@ static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off /** - * gx_set_cpuspeed: - * set cpu speed in khz. + * gx_set_cpuspeed: + * set cpu speed in khz. **/ static void gx_set_cpuspeed(unsigned int khz) { - u8 suscfg, pmer1; + u8 suscfg, pmer1; unsigned int new_khz; unsigned long flags; struct cpufreq_freqs freqs; - freqs.cpu = 0; freqs.old = gx_get_cpuspeed(0); @@ -303,18 +301,18 @@ static void gx_set_cpuspeed(unsigned int khz) pci_write_config_byte(gx_params->cs55x0, PCI_MODOFF, gx_params->off_duration); pci_write_config_byte(gx_params->cs55x0, PCI_MODON, gx_params->on_duration); - pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg); - pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg); + pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, suscfg); + pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &suscfg); - local_irq_restore(flags); + local_irq_restore(flags); gx_params->pci_suscfg = suscfg; cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - dprintk("suspend modulation w/ duration of ON:%d us, OFF:%d us\n", - gx_params->on_duration * 32, gx_params->off_duration * 32); - dprintk("suspend modulation w/ clock speed: %d kHz.\n", freqs.new); + dprintk("suspend modulation w/ duration of ON:%d us, OFF:%d us\n", + gx_params->on_duration * 32, gx_params->off_duration * 32); + dprintk("suspend modulation w/ clock speed: %d kHz.\n", freqs.new); } /**************************************************************** @@ -322,10 +320,10 @@ static void gx_set_cpuspeed(unsigned int khz) ****************************************************************/ /* - * cpufreq_gx_verify: test if frequency range is valid + * cpufreq_gx_verify: test if frequency range is valid * - * This function checks if a given frequency range in kHz is valid - * for the hardware supported by the driver. + * This function checks if a given frequency range in kHz is valid + * for the hardware supported by the driver. */ static int cpufreq_gx_verify(struct cpufreq_policy *policy) @@ -333,8 +331,8 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy) unsigned int tmp_freq = 0; u8 tmp1, tmp2; - if (!stock_freq || !policy) - return -EINVAL; + if (!stock_freq || !policy) + return -EINVAL; policy->cpu = 0; cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq); @@ -342,14 +340,14 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy) /* it needs to be assured that at least one supported frequency is * within policy->min and policy->max. If it is not, policy->max * needs to be increased until one freuqency is supported. - * policy->min may not be decreased, though. This way we guarantee a + * policy->min may not be decreased, though. This way we guarantee a * specific processing capacity. */ tmp_freq = gx_validate_speed(policy->min, &tmp1, &tmp2); - if (tmp_freq < policy->min) + if (tmp_freq < policy->min) tmp_freq += stock_freq / max_duration; policy->min = tmp_freq; - if (policy->min > policy->max) + if (policy->min > policy->max) policy->max = tmp_freq; tmp_freq = gx_validate_speed(policy->max, &tmp1, &tmp2); if (tmp_freq > policy->max) @@ -358,12 +356,12 @@ static int cpufreq_gx_verify(struct cpufreq_policy *policy) if (policy->max < policy->min) policy->max = policy->min; cpufreq_verify_within_limits(policy, (stock_freq / max_duration), stock_freq); - + return 0; } /* - * cpufreq_gx_target: + * cpufreq_gx_target: * */ static int cpufreq_gx_target(struct cpufreq_policy *policy, @@ -373,8 +371,8 @@ static int cpufreq_gx_target(struct cpufreq_policy *policy, u8 tmp1, tmp2; unsigned int tmp_freq; - if (!stock_freq || !policy) - return -EINVAL; + if (!stock_freq || !policy) + return -EINVAL; policy->cpu = 0; @@ -431,7 +429,7 @@ static int cpufreq_gx_cpu_init(struct cpufreq_policy *policy) return 0; } -/* +/* * cpufreq_gx_init: * MediaGX/Geode GX initialize cpufreq driver */ @@ -452,7 +450,7 @@ static int __init cpufreq_gx_init(void) u32 class_rev; /* Test if we have the right hardware */ - if ((gx_pci = gx_detect_chipset()) == NULL) + if ((gx_pci = gx_detect_chipset()) == NULL) return -ENODEV; /* check whether module parameters are sane */ @@ -478,7 +476,7 @@ static int __init cpufreq_gx_init(void) pci_read_config_dword(params->cs55x0, PCI_CLASS_REVISION, &class_rev); params->pci_rev = class_rev && 0xff; - if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) { + if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) { kfree(params); return ret; /* register error! */ } |
