diff options
Diffstat (limited to 'arch/i386/boot/compressed/misc_32.c')
| -rw-r--r-- | arch/i386/boot/compressed/misc_32.c | 379 |
1 files changed, 0 insertions, 379 deletions
diff --git a/arch/i386/boot/compressed/misc_32.c b/arch/i386/boot/compressed/misc_32.c deleted file mode 100644 index b28505c..0000000 --- a/arch/i386/boot/compressed/misc_32.c +++ /dev/null @@ -1,379 +0,0 @@ -/* - * misc.c - * - * This is a collection of several routines from gzip-1.0.3 - * adapted for Linux. - * - * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 - * puts by Nick Holloway 1993, better puts by Martin Mares 1995 - * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 - */ - -#undef CONFIG_PARAVIRT -#include <linux/linkage.h> -#include <linux/vmalloc.h> -#include <linux/screen_info.h> -#include <asm/io.h> -#include <asm/page.h> -#include <asm/boot.h> - -/* WARNING!! - * This code is compiled with -fPIC and it is relocated dynamically - * at run time, but no relocation processing is performed. - * This means that it is not safe to place pointers in static structures. - */ - -/* - * Getting to provable safe in place decompression is hard. - * Worst case behaviours need to be analized. - * Background information: - * - * The file layout is: - * magic[2] - * method[1] - * flags[1] - * timestamp[4] - * extraflags[1] - * os[1] - * compressed data blocks[N] - * crc[4] orig_len[4] - * - * resulting in 18 bytes of non compressed data overhead. - * - * Files divided into blocks - * 1 bit (last block flag) - * 2 bits (block type) - * - * 1 block occurs every 32K -1 bytes or when there 50% compression has been achieved. - * The smallest block type encoding is always used. - * - * stored: - * 32 bits length in bytes. - * - * fixed: - * magic fixed tree. - * symbols. - * - * dynamic: - * dynamic tree encoding. - * symbols. - * - * - * The buffer for decompression in place is the length of the - * uncompressed data, plus a small amount extra to keep the algorithm safe. - * The compressed data is placed at the end of the buffer. The output - * pointer is placed at the start of the buffer and the input pointer - * is placed where the compressed data starts. Problems will occur - * when the output pointer overruns the input pointer. - * - * The output pointer can only overrun the input pointer if the input - * pointer is moving faster than the output pointer. A condition only - * triggered by data whose compressed form is larger than the uncompressed - * form. - * - * The worst case at the block level is a growth of the compressed data - * of 5 bytes per 32767 bytes. - * - * The worst case internal to a compressed block is very hard to figure. - * The worst case can at least be boundined by having one bit that represents - * 32764 bytes and then all of the rest of the bytes representing the very - * very last byte. - * - * All of which is enough to compute an amount of extra data that is required - * to be safe. To avoid problems at the block level allocating 5 extra bytes - * per 32767 bytes of data is sufficient. To avoind problems internal to a block - * adding an extra 32767 bytes (the worst case uncompressed block size) is - * sufficient, to ensure that in the worst case the decompressed data for - * block will stop the byte before the compressed data for a block begins. - * To avoid problems with the compressed data's meta information an extra 18 - * bytes are needed. Leading to the formula: - * - * extra_bytes = (uncompressed_size >> 12) + 32768 + 18 + decompressor_size. - * - * Adding 8 bytes per 32K is a bit excessive but much easier to calculate. - * Adding 32768 instead of 32767 just makes for round numbers. - * Adding the decompressor_size is necessary as it musht live after all - * of the data as well. Last I measured the decompressor is about 14K. - * 10K of actuall data and 4K of bss. - * - */ - -/* - * gzip declarations - */ - -#define OF(args) args -#define STATIC static - -#undef memset -#undef memcpy -#define memzero(s, n) memset ((s), 0, (n)) - -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - -#define WSIZE 0x80000000 /* Window size must be at least 32k, - * and a power of two - * We don't actually have a window just - * a huge output buffer so I report - * a 2G windows size, as that should - * always be larger than our output buffer. - */ - -static uch *inbuf; /* input buffer */ -static uch *window; /* Sliding window buffer, (and final output buffer) */ - -static unsigned insize; /* valid bytes in inbuf */ -static unsigned inptr; /* index of next byte to be processed in inbuf */ -static unsigned outcnt; /* bytes in output buffer */ - -/* gzip flag byte */ -#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */ -#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ -#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ -#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ -#define COMMENT 0x10 /* bit 4 set: file comment present */ -#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ -#define RESERVED 0xC0 /* bit 6,7: reserved */ - -#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf()) - -/* Diagnostic functions */ -#ifdef DEBUG -# define Assert(cond,msg) {if(!(cond)) error(msg);} -# define Trace(x) fprintf x -# define Tracev(x) {if (verbose) fprintf x ;} -# define Tracevv(x) {if (verbose>1) fprintf x ;} -# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} -# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} -#else -# define Assert(cond,msg) -# define Trace(x) -# define Tracev(x) -# define Tracevv(x) -# define Tracec(c,x) -# define Tracecv(c,x) -#endif - -static int fill_inbuf(void); -static void flush_window(void); -static void error(char *m); -static void gzip_mark(void **); -static void gzip_release(void **); - -/* - * This is set up by the setup-routine at boot-time - */ -static unsigned char *real_mode; /* Pointer to real-mode data */ - -#define RM_EXT_MEM_K (*(unsigned short *)(real_mode + 0x2)) -#ifndef STANDARD_MEMORY_BIOS_CALL -#define RM_ALT_MEM_K (*(unsigned long *)(real_mode + 0x1e0)) -#endif -#define RM_SCREEN_INFO (*(struct screen_info *)(real_mode+0)) - -extern unsigned char input_data[]; -extern int input_len; - -static long bytes_out = 0; - -static void *malloc(int size); -static void free(void *where); - -static void *memset(void *s, int c, unsigned n); -static void *memcpy(void *dest, const void *src, unsigned n); - -static void putstr(const char *); - -static unsigned long free_mem_ptr; -static unsigned long free_mem_end_ptr; - -#define HEAP_SIZE 0x4000 - -static char *vidmem = (char *)0xb8000; -static int vidport; -static int lines, cols; - -#ifdef CONFIG_X86_NUMAQ -void *xquad_portio; -#endif - -#include "../../../../lib/inflate.c" - -static void *malloc(int size) -{ - void *p; - - if (size <0) error("Malloc error"); - if (free_mem_ptr <= 0) error("Memory error"); - - free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */ - - p = (void *)free_mem_ptr; - free_mem_ptr += size; - - if (free_mem_ptr >= free_mem_end_ptr) - error("Out of memory"); - - return p; -} - -static void free(void *where) -{ /* Don't care */ -} - -static void gzip_mark(void **ptr) -{ - *ptr = (void *) free_mem_ptr; -} - -static void gzip_release(void **ptr) -{ - free_mem_ptr = (unsigned long) *ptr; -} - -static void scroll(void) -{ - int i; - - memcpy ( vidmem, vidmem + cols * 2, ( lines - 1 ) * cols * 2 ); - for ( i = ( lines - 1 ) * cols * 2; i < lines * cols * 2; i += 2 ) - vidmem[i] = ' '; -} - -static void putstr(const char *s) -{ - int x,y,pos; - char c; - - x = RM_SCREEN_INFO.orig_x; - y = RM_SCREEN_INFO.orig_y; - - while ( ( c = *s++ ) != '\0' ) { - if ( c == '\n' ) { - x = 0; - if ( ++y >= lines ) { - scroll(); - y--; - } - } else { - vidmem [ ( x + cols * y ) * 2 ] = c; - if ( ++x >= cols ) { - x = 0; - if ( ++y >= lines ) { - scroll(); - y--; - } - } - } - } - - RM_SCREEN_INFO.orig_x = x; - RM_SCREEN_INFO.orig_y = y; - - pos = (x + cols * y) * 2; /* Update cursor position */ - outb_p(14, vidport); - outb_p(0xff & (pos >> 9), vidport+1); - outb_p(15, vidport); - outb_p(0xff & (pos >> 1), vidport+1); -} - -static void* memset(void* s, int c, unsigned n) -{ - int i; - char *ss = (char*)s; - - for (i=0;i<n;i++) ss[i] = c; - return s; -} - -static void* memcpy(void* dest, const void* src, unsigned n) -{ - int i; - char *d = (char *)dest, *s = (char *)src; - - for (i=0;i<n;i++) d[i] = s[i]; - return dest; -} - -/* =========================================================================== - * Fill the input buffer. This is called only when the buffer is empty - * and at least one byte is really needed. - */ -static int fill_inbuf(void) -{ - error("ran out of input data"); - return 0; -} - -/* =========================================================================== - * Write the output window window[0..outcnt-1] and update crc and bytes_out. - * (Used for the decompressed data only.) - */ -static void flush_window(void) -{ - /* With my window equal to my output buffer - * I only need to compute the crc here. - */ - ulg c = crc; /* temporary variable */ - unsigned n; - uch *in, ch; - - in = window; - for (n = 0; n < outcnt; n++) { - ch = *in++; - c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); - } - crc = c; - bytes_out += (ulg)outcnt; - outcnt = 0; -} - -static void error(char *x) -{ - putstr("\n\n"); - putstr(x); - putstr("\n\n -- System halted"); - - while(1); /* Halt */ -} - -asmlinkage void decompress_kernel(void *rmode, unsigned long end, - uch *input_data, unsigned long input_len, uch *output) -{ - real_mode = rmode; - - if (RM_SCREEN_INFO.orig_video_mode == 7) { - vidmem = (char *) 0xb0000; - vidport = 0x3b4; - } else { - vidmem = (char *) 0xb8000; - vidport = 0x3d4; - } - - lines = RM_SCREEN_INFO.orig_video_lines; - cols = RM_SCREEN_INFO.orig_video_cols; - - window = output; /* Output buffer (Normally at 1M) */ - free_mem_ptr = end; /* Heap */ - free_mem_end_ptr = end + HEAP_SIZE; - inbuf = input_data; /* Input buffer */ - insize = input_len; - inptr = 0; - - if ((u32)output & (CONFIG_PHYSICAL_ALIGN -1)) - error("Destination address not CONFIG_PHYSICAL_ALIGN aligned"); - if (end > ((-__PAGE_OFFSET-(512 <<20)-1) & 0x7fffffff)) - error("Destination address too large"); -#ifndef CONFIG_RELOCATABLE - if ((u32)output != LOAD_PHYSICAL_ADDR) - error("Wrong destination address"); -#endif - - makecrc(); - putstr("Uncompressing Linux... "); - gunzip(); - putstr("Ok, booting the kernel.\n"); - return; -} |
