summaryrefslogtreecommitdiffstats
path: root/arch/i386/boot/compressed/head.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/i386/boot/compressed/head.S')
-rw-r--r--arch/i386/boot/compressed/head.S185
1 files changed, 118 insertions, 67 deletions
diff --git a/arch/i386/boot/compressed/head.S b/arch/i386/boot/compressed/head.S
index b5893e4..f395a4b 100644
--- a/arch/i386/boot/compressed/head.S
+++ b/arch/i386/boot/compressed/head.S
@@ -26,9 +26,11 @@
#include <linux/linkage.h>
#include <asm/segment.h>
#include <asm/page.h>
+#include <asm/boot.h>
+.section ".text.head"
.globl startup_32
-
+
startup_32:
cld
cli
@@ -37,93 +39,142 @@ startup_32:
movl %eax,%es
movl %eax,%fs
movl %eax,%gs
+ movl %eax,%ss
- lss stack_start,%esp
- xorl %eax,%eax
-1: incl %eax # check that A20 really IS enabled
- movl %eax,0x000000 # loop forever if it isn't
- cmpl %eax,0x100000
- je 1b
+/* Calculate the delta between where we were compiled to run
+ * at and where we were actually loaded at. This can only be done
+ * with a short local call on x86. Nothing else will tell us what
+ * address we are running at. The reserved chunk of the real-mode
+ * data at 0x34-0x3f are used as the stack for this calculation.
+ * Only 4 bytes are needed.
+ */
+ leal 0x40(%esi), %esp
+ call 1f
+1: popl %ebp
+ subl $1b, %ebp
+
+/* %ebp contains the address we are loaded at by the boot loader and %ebx
+ * contains the address where we should move the kernel image temporarily
+ * for safe in-place decompression.
+ */
+
+#ifdef CONFIG_RELOCATABLE
+ movl %ebp, %ebx
+ addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebx
+ andl $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebx
+#else
+ movl $LOAD_PHYSICAL_ADDR, %ebx
+#endif
+
+ /* Replace the compressed data size with the uncompressed size */
+ subl input_len(%ebp), %ebx
+ movl output_len(%ebp), %eax
+ addl %eax, %ebx
+ /* Add 8 bytes for every 32K input block */
+ shrl $12, %eax
+ addl %eax, %ebx
+ /* Add 32K + 18 bytes of extra slack */
+ addl $(32768 + 18), %ebx
+ /* Align on a 4K boundary */
+ addl $4095, %ebx
+ andl $~4095, %ebx
+
+/* Copy the compressed kernel to the end of our buffer
+ * where decompression in place becomes safe.
+ */
+ pushl %esi
+ leal _end(%ebp), %esi
+ leal _end(%ebx), %edi
+ movl $(_end - startup_32), %ecx
+ std
+ rep
+ movsb
+ cld
+ popl %esi
+
+/* Compute the kernel start address.
+ */
+#ifdef CONFIG_RELOCATABLE
+ addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebp
+ andl $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebp
+#else
+ movl $LOAD_PHYSICAL_ADDR, %ebp
+#endif
/*
- * Initialize eflags. Some BIOS's leave bits like NT set. This would
- * confuse the debugger if this code is traced.
- * XXX - best to initialize before switching to protected mode.
+ * Jump to the relocated address.
*/
- pushl $0
- popfl
+ leal relocated(%ebx), %eax
+ jmp *%eax
+.section ".text"
+relocated:
+
/*
* Clear BSS
*/
xorl %eax,%eax
- movl $_edata,%edi
- movl $_end,%ecx
+ leal _edata(%ebx),%edi
+ leal _end(%ebx), %ecx
subl %edi,%ecx
cld
rep
stosb
+
+/*
+ * Setup the stack for the decompressor
+ */
+ leal stack_end(%ebx), %esp
+
/*
* Do the decompression, and jump to the new kernel..
*/
- subl $16,%esp # place for structure on the stack
- movl %esp,%eax
+ movl output_len(%ebx), %eax
+ pushl %eax
+ pushl %ebp # output address
+ movl input_len(%ebx), %eax
+ pushl %eax # input_len
+ leal input_data(%ebx), %eax
+ pushl %eax # input_data
+ leal _end(%ebx), %eax
+ pushl %eax # end of the image as third argument
pushl %esi # real mode pointer as second arg
- pushl %eax # address of structure as first arg
call decompress_kernel
- orl %eax,%eax
- jnz 3f
- popl %esi # discard address
- popl %esi # real mode pointer
- xorl %ebx,%ebx
- ljmp $(__BOOT_CS), $__PHYSICAL_START
+ addl $20, %esp
+ popl %ecx
+#if CONFIG_RELOCATABLE
+/* Find the address of the relocations.
+ */
+ movl %ebp, %edi
+ addl %ecx, %edi
+
+/* Calculate the delta between where vmlinux was compiled to run
+ * and where it was actually loaded.
+ */
+ movl %ebp, %ebx
+ subl $LOAD_PHYSICAL_ADDR, %ebx
+ jz 2f /* Nothing to be done if loaded at compiled addr. */
/*
- * We come here, if we were loaded high.
- * We need to move the move-in-place routine down to 0x1000
- * and then start it with the buffer addresses in registers,
- * which we got from the stack.
+ * Process relocations.
*/
-3:
- movl $move_routine_start,%esi
- movl $0x1000,%edi
- movl $move_routine_end,%ecx
- subl %esi,%ecx
- addl $3,%ecx
- shrl $2,%ecx
- cld
- rep
- movsl
-
- popl %esi # discard the address
- popl %ebx # real mode pointer
- popl %esi # low_buffer_start
- popl %ecx # lcount
- popl %edx # high_buffer_start
- popl %eax # hcount
- movl $__PHYSICAL_START,%edi
- cli # make sure we don't get interrupted
- ljmp $(__BOOT_CS), $0x1000 # and jump to the move routine
+
+1: subl $4, %edi
+ movl 0(%edi), %ecx
+ testl %ecx, %ecx
+ jz 2f
+ addl %ebx, -__PAGE_OFFSET(%ebx, %ecx)
+ jmp 1b
+2:
+#endif
/*
- * Routine (template) for moving the decompressed kernel in place,
- * if we were high loaded. This _must_ PIC-code !
+ * Jump to the decompressed kernel.
*/
-move_routine_start:
- movl %ecx,%ebp
- shrl $2,%ecx
- rep
- movsl
- movl %ebp,%ecx
- andl $3,%ecx
- rep
- movsb
- movl %edx,%esi
- movl %eax,%ecx # NOTE: rep movsb won't move if %ecx == 0
- addl $3,%ecx
- shrl $2,%ecx
- rep
- movsl
- movl %ebx,%esi # Restore setup pointer
xorl %ebx,%ebx
- ljmp $(__BOOT_CS), $__PHYSICAL_START
-move_routine_end:
+ jmp *%ebp
+
+.bss
+.balign 4
+stack:
+ .fill 4096, 1, 0
+stack_end:
OpenPOWER on IntegriCloud