diff options
Diffstat (limited to 'arch/frv/kernel/head-uc-fr401.S')
| -rw-r--r-- | arch/frv/kernel/head-uc-fr401.S | 311 |
1 files changed, 311 insertions, 0 deletions
diff --git a/arch/frv/kernel/head-uc-fr401.S b/arch/frv/kernel/head-uc-fr401.S new file mode 100644 index 0000000..4ccf841 --- /dev/null +++ b/arch/frv/kernel/head-uc-fr401.S @@ -0,0 +1,311 @@ +/* head-uc-fr401.S: FR401/3/5 uc-linux specific bits of initialisation + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/config.h> +#include <linux/threads.h> +#include <linux/linkage.h> +#include <asm/ptrace.h> +#include <asm/page.h> +#include <asm/spr-regs.h> +#include <asm/mb86943a.h> +#include "head.inc" + + +#define __400_DBR0 0xfe000e00 +#define __400_DBR1 0xfe000e08 +#define __400_DBR2 0xfe000e10 /* not on FR401 */ +#define __400_DBR3 0xfe000e18 /* not on FR401 */ +#define __400_DAM0 0xfe000f00 +#define __400_DAM1 0xfe000f08 +#define __400_DAM2 0xfe000f10 /* not on FR401 */ +#define __400_DAM3 0xfe000f18 /* not on FR401 */ +#define __400_LGCR 0xfe000010 +#define __400_LCR 0xfe000100 +#define __400_LSBR 0xfe000c00 + + .section .text.init,"ax" + .balign 4 + +############################################################################### +# +# describe the position and layout of the SDRAM controller registers +# +# ENTRY: EXIT: +# GR5 - cacheline size +# GR11 - displacement of 2nd SDRAM addr reg from GR14 +# GR12 - displacement of 3rd SDRAM addr reg from GR14 +# GR13 - displacement of 4th SDRAM addr reg from GR14 +# GR14 - address of 1st SDRAM addr reg +# GR15 - amount to shift address by to match SDRAM addr reg +# GR26 &__head_reference [saved] +# GR30 LED address [saved] +# CC0 - T if DBR0 is present +# CC1 - T if DBR1 is present +# CC2 - T if DBR2 is present (not FR401/FR401A) +# CC3 - T if DBR3 is present (not FR401/FR401A) +# +############################################################################### + .globl __head_fr401_describe_sdram +__head_fr401_describe_sdram: + sethi.p %hi(__400_DBR0),gr14 + setlo %lo(__400_DBR0),gr14 + setlos.p #__400_DBR1-__400_DBR0,gr11 + setlos #__400_DBR2-__400_DBR0,gr12 + setlos.p #__400_DBR3-__400_DBR0,gr13 + setlos #32,gr5 ; cacheline size + setlos.p #0,gr15 ; amount to shift addr reg by + + # specify which DBR regs are present + setlos #0x00ff,gr4 + movgs gr4,cccr + movsg psr,gr3 ; check for FR401/FR401A + srli gr3,#25,gr3 + subicc gr3,#0x20>>1,gr0,icc0 + bnelr icc0,#1 + setlos #0x000f,gr4 + movgs gr4,cccr + bralr + +############################################################################### +# +# rearrange the bus controller registers +# +# ENTRY: EXIT: +# GR26 &__head_reference [saved] +# GR30 LED address revised LED address +# +############################################################################### + .globl __head_fr401_set_busctl +__head_fr401_set_busctl: + sethi.p %hi(__400_LGCR),gr4 + setlo %lo(__400_LGCR),gr4 + sethi.p %hi(__400_LSBR),gr10 + setlo %lo(__400_LSBR),gr10 + sethi.p %hi(__400_LCR),gr11 + setlo %lo(__400_LCR),gr11 + + # set the bus controller + ldi @(gr4,#0),gr5 + ori gr5,#0xff,gr5 ; make sure all chip-selects are enabled + sti gr5,@(gr4,#0) + + sethi.p %hi(__region_CS1),gr4 + setlo %lo(__region_CS1),gr4 + sethi.p %hi(__region_CS1_M),gr5 + setlo %lo(__region_CS1_M),gr5 + sethi.p %hi(__region_CS1_C),gr6 + setlo %lo(__region_CS1_C),gr6 + sti gr4,@(gr10,#1*0x08) + sti gr5,@(gr10,#1*0x08+0x100) + sti gr6,@(gr11,#1*0x08) + sethi.p %hi(__region_CS2),gr4 + setlo %lo(__region_CS2),gr4 + sethi.p %hi(__region_CS2_M),gr5 + setlo %lo(__region_CS2_M),gr5 + sethi.p %hi(__region_CS2_C),gr6 + setlo %lo(__region_CS2_C),gr6 + sti gr4,@(gr10,#2*0x08) + sti gr5,@(gr10,#2*0x08+0x100) + sti gr6,@(gr11,#2*0x08) + sethi.p %hi(__region_CS3),gr4 + setlo %lo(__region_CS3),gr4 + sethi.p %hi(__region_CS3_M),gr5 + setlo %lo(__region_CS3_M),gr5 + sethi.p %hi(__region_CS3_C),gr6 + setlo %lo(__region_CS3_C),gr6 + sti gr4,@(gr10,#3*0x08) + sti gr5,@(gr10,#3*0x08+0x100) + sti gr6,@(gr11,#3*0x08) + sethi.p %hi(__region_CS4),gr4 + setlo %lo(__region_CS4),gr4 + sethi.p %hi(__region_CS4_M),gr5 + setlo %lo(__region_CS4_M),gr5 + sethi.p %hi(__region_CS4_C),gr6 + setlo %lo(__region_CS4_C),gr6 + sti gr4,@(gr10,#4*0x08) + sti gr5,@(gr10,#4*0x08+0x100) + sti gr6,@(gr11,#4*0x08) + sethi.p %hi(__region_CS5),gr4 + setlo %lo(__region_CS5),gr4 + sethi.p %hi(__region_CS5_M),gr5 + setlo %lo(__region_CS5_M),gr5 + sethi.p %hi(__region_CS5_C),gr6 + setlo %lo(__region_CS5_C),gr6 + sti gr4,@(gr10,#5*0x08) + sti gr5,@(gr10,#5*0x08+0x100) + sti gr6,@(gr11,#5*0x08) + sethi.p %hi(__region_CS6),gr4 + setlo %lo(__region_CS6),gr4 + sethi.p %hi(__region_CS6_M),gr5 + setlo %lo(__region_CS6_M),gr5 + sethi.p %hi(__region_CS6_C),gr6 + setlo %lo(__region_CS6_C),gr6 + sti gr4,@(gr10,#6*0x08) + sti gr5,@(gr10,#6*0x08+0x100) + sti gr6,@(gr11,#6*0x08) + sethi.p %hi(__region_CS7),gr4 + setlo %lo(__region_CS7),gr4 + sethi.p %hi(__region_CS7_M),gr5 + setlo %lo(__region_CS7_M),gr5 + sethi.p %hi(__region_CS7_C),gr6 + setlo %lo(__region_CS7_C),gr6 + sti gr4,@(gr10,#7*0x08) + sti gr5,@(gr10,#7*0x08+0x100) + sti gr6,@(gr11,#7*0x08) + membar + bar + + # adjust LED bank address + sethi.p %hi(LED_ADDR - 0x20000000 +__region_CS2),gr30 + setlo %lo(LED_ADDR - 0x20000000 +__region_CS2),gr30 + bralr + +############################################################################### +# +# determine the total SDRAM size +# +# ENTRY: EXIT: +# GR25 - SDRAM size +# GR26 &__head_reference [saved] +# GR30 LED address [saved] +# +############################################################################### + .globl __head_fr401_survey_sdram +__head_fr401_survey_sdram: + sethi.p %hi(__400_DAM0),gr11 + setlo %lo(__400_DAM0),gr11 + sethi.p %hi(__400_DBR0),gr12 + setlo %lo(__400_DBR0),gr12 + + sethi.p %hi(0xfe000000),gr17 ; unused SDRAM DBR value + setlo %lo(0xfe000000),gr17 + setlos #0,gr25 + + ldi @(gr12,#0x00),gr4 ; DAR0 + subcc gr4,gr17,gr0,icc0 + beq icc0,#0,__head_no_DCS0 + ldi @(gr11,#0x00),gr6 ; DAM0: bits 31:20 match addr 31:20 + add gr25,gr6,gr25 + addi gr25,#1,gr25 +__head_no_DCS0: + + ldi @(gr12,#0x08),gr4 ; DAR1 + subcc gr4,gr17,gr0,icc0 + beq icc0,#0,__head_no_DCS1 + ldi @(gr11,#0x08),gr6 ; DAM1: bits 31:20 match addr 31:20 + add gr25,gr6,gr25 + addi gr25,#1,gr25 +__head_no_DCS1: + + # FR401/FR401A does not have DCS2/3 + movsg psr,gr3 + srli gr3,#25,gr3 + subicc gr3,#0x20>>1,gr0,icc0 + beq icc0,#0,__head_no_DCS3 + + ldi @(gr12,#0x10),gr4 ; DAR2 + subcc gr4,gr17,gr0,icc0 + beq icc0,#0,__head_no_DCS2 + ldi @(gr11,#0x10),gr6 ; DAM2: bits 31:20 match addr 31:20 + add gr25,gr6,gr25 + addi gr25,#1,gr25 +__head_no_DCS2: + + ldi @(gr12,#0x18),gr4 ; DAR3 + subcc gr4,gr17,gr0,icc0 + beq icc0,#0,__head_no_DCS3 + ldi @(gr11,#0x18),gr6 ; DAM3: bits 31:20 match addr 31:20 + add gr25,gr6,gr25 + addi gr25,#1,gr25 +__head_no_DCS3: + bralr + +############################################################################### +# +# set the protection map with the I/DAMPR registers +# +# ENTRY: EXIT: +# GR25 SDRAM size [saved] +# GR26 &__head_reference [saved] +# GR30 LED address [saved] +# +############################################################################### + .globl __head_fr401_set_protection +__head_fr401_set_protection: + movsg lr,gr27 + + # set the I/O region protection registers for FR401/3/5 + sethi.p %hi(__region_IO),gr5 + setlo %lo(__region_IO),gr5 + ori gr5,#xAMPRx_SS_512Mb|xAMPRx_S_KERNEL|xAMPRx_C|xAMPRx_V,gr5 + movgs gr0,iampr7 + movgs gr5,dampr7 ; General I/O tile + + # need to tile the remaining IAMPR/DAMPR registers to cover as much of the RAM as possible + # - start with the highest numbered registers + sethi.p %hi(__kernel_image_end),gr8 + setlo %lo(__kernel_image_end),gr8 + sethi.p %hi(32768),gr4 ; allow for a maximal allocator bitmap + setlo %lo(32768),gr4 + add gr8,gr4,gr8 + sethi.p %hi(1024*2048-1),gr4 ; round up to nearest 2MiB + setlo %lo(1024*2048-1),gr4 + add.p gr8,gr4,gr8 + not gr4,gr4 + and gr8,gr4,gr8 + + sethi.p %hi(__page_offset),gr9 + setlo %lo(__page_offset),gr9 + add gr9,gr25,gr9 + + # GR8 = base of uncovered RAM + # GR9 = top of uncovered RAM + +#ifdef CONFIG_MB93093_PDK + sethi.p %hi(__region_CS2),gr4 + setlo %lo(__region_CS2),gr4 + ori gr4,#xAMPRx_SS_1Mb|xAMPRx_S_KERNEL|xAMPRx_C|xAMPRx_V,gr4 + movgs gr4,dampr6 + movgs gr0,iampr6 +#else + call __head_split_region + movgs gr4,iampr6 + movgs gr5,dampr6 +#endif + call __head_split_region + movgs gr4,iampr5 + movgs gr5,dampr5 + call __head_split_region + movgs gr4,iampr4 + movgs gr5,dampr4 + call __head_split_region + movgs gr4,iampr3 + movgs gr5,dampr3 + call __head_split_region + movgs gr4,iampr2 + movgs gr5,dampr2 + call __head_split_region + movgs gr4,iampr1 + movgs gr5,dampr1 + + # cover kernel core image with kernel-only segment + sethi.p %hi(__page_offset),gr8 + setlo %lo(__page_offset),gr8 + call __head_split_region + +#ifdef CONFIG_PROTECT_KERNEL + ori.p gr4,#xAMPRx_S_KERNEL,gr4 + ori gr5,#xAMPRx_S_KERNEL,gr5 +#endif + + movgs gr4,iampr0 + movgs gr5,dampr0 + jmpl @(gr27,gr0) |
