diff options
Diffstat (limited to 'arch/frv/kernel/cmode.S')
| -rw-r--r-- | arch/frv/kernel/cmode.S | 190 |
1 files changed, 190 insertions, 0 deletions
diff --git a/arch/frv/kernel/cmode.S b/arch/frv/kernel/cmode.S new file mode 100644 index 0000000..6591e6a --- /dev/null +++ b/arch/frv/kernel/cmode.S @@ -0,0 +1,190 @@ +/* cmode.S: clock mode management + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Woodhouse (dwmw2@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include <linux/sys.h> +#include <linux/config.h> +#include <linux/linkage.h> +#include <asm/setup.h> +#include <asm/segment.h> +#include <asm/ptrace.h> +#include <asm/errno.h> +#include <asm/cache.h> +#include <asm/spr-regs.h> + +#define __addr_MASK 0xfeff9820 /* interrupt controller mask */ + +#define __addr_SDRAMC 0xfe000400 /* SDRAM controller regs */ +#define SDRAMC_DSTS 0x28 /* SDRAM status */ +#define SDRAMC_DSTS_SSI 0x00000001 /* indicates that the SDRAM is in self-refresh mode */ +#define SDRAMC_DRCN 0x30 /* SDRAM refresh control */ +#define SDRAMC_DRCN_SR 0x00000001 /* transition SDRAM into self-refresh mode */ +#define __addr_CLKC 0xfeff9a00 +#define CLKC_SWCMODE 0x00000008 +#define __addr_LEDS 0xe1200004 + +.macro li v r + sethi.p %hi(\v),\r + setlo %lo(\v),\r +.endm + + .text + .balign 4 + + +############################################################################### +# +# Change CMODE +# - void frv_change_cmode(int cmode) +# +############################################################################### + .globl frv_change_cmode + .type frv_change_cmode,@function + +.macro LEDS v +#ifdef DEBUG_CMODE + setlos #~\v,gr10 + sti gr10,@(gr11,#0) + membar +#endif +.endm + +frv_change_cmode: + movsg lr,gr9 +#ifdef DEBUG_CMODE + li __addr_LEDS,gr11 +#endif + dcef @(gr0,gr0),#1 + + # Shift argument left by 24 bits to fit in SWCMODE register later. + slli gr8,#24,gr8 + + # (1) Set '0' in the PSR.ET bit, and prohibit interrupts. + movsg psr,gr14 + andi gr14,#~PSR_ET,gr3 + movgs gr3,psr + +#if 0 // Fujitsu recommend to skip this and will update docs. + # (2) Set '0' to all bits of the MASK register of the interrupt + # controller, and mask interrupts. + li __addr_MASK,gr12 + ldi @(gr12,#0),gr13 + li 0xffff0000,gr4 + sti gr4,@(gr12,#0) +#endif + + # (3) Stop the transfer function of DMAC. Stop all the bus masters + # to access SDRAM and the internal resources. + + # (already done by caller) + + # (4) Preload a series of following instructions to the instruction + # cache. + li #__cmode_icache_lock_start,gr3 + li #__cmode_icache_lock_end,gr4 + +1: icpl gr3,gr0,#1 + addi gr3,#L1_CACHE_BYTES,gr3 + cmp gr4,gr3,icc0 + bhi icc0,#0,1b + + # Set up addresses in regs for later steps. + setlos SDRAMC_DRCN_SR,gr3 + li __addr_SDRAMC,gr4 + li __addr_CLKC,gr5 + ldi @(gr5,#0),gr6 + li #0x80000000,gr7 + or gr6,gr7,gr6 + + bra __cmode_icache_lock_start + + .balign L1_CACHE_BYTES +__cmode_icache_lock_start: + + # (5) Flush the content of all caches by the DCEF instruction. + dcef @(gr0,gr0),#1 + + # (6) Execute loading the dummy for SDRAM. + ldi @(gr9,#0),gr0 + + # (7) Set '1' to the DRCN.SR bit, and change SDRAM to the + # self-refresh mode. Execute the dummy load to all memory + # devices set to cacheable on the external bus side in parallel + # with this. + sti gr3,@(gr4,#SDRAMC_DRCN) + + # (8) Execute memory barrier instruction (MEMBAR). + membar + + # (9) Read the DSTS register repeatedly until '1' stands in the + # DSTS.SSI field. +1: ldi @(gr4,#SDRAMC_DSTS),gr3 + andicc gr3,#SDRAMC_DSTS_SSI,gr3,icc0 + beq icc0,#0,1b + + # (10) Execute memory barrier instruction (MEMBAR). + membar + +#if 1 + # (11) Set the value of CMODE that you want to change to + # SWCMODE.SWCM[3:0]. + sti gr8,@(gr5,#CLKC_SWCMODE) + + # (12) Set '1' to the CLKC.SWEN bit. In that case, do not change + # fields other than SWEN of the CLKC register. + sti gr6,@(gr5,#0) +#endif + # (13) Execute the instruction just after the memory barrier + # instruction that executes the self-loop 256 times. (Meanwhile, + # the CMODE switch is done.) + membar + setlos #256,gr7 +2: subicc gr7,#1,gr7,icc0 + bne icc0,#2,2b + + LEDS 0x36 + + # (14) Release the self-refresh of SDRAM. + sti gr0,@(gr4,#SDRAMC_DRCN) + + # Wait for it... +3: ldi @(gr4,#SDRAMC_DSTS),gr3 + andicc gr3,#SDRAMC_DSTS_SSI,gr3,icc0 + bne icc0,#2,3b + +#if 0 + li 0x0100000,gr10 +4: subicc gr10,#1,gr10,icc0 + + bne icc0,#0,4b +#endif + +__cmode_icache_lock_end: + + li #__cmode_icache_lock_start,gr3 + li #__cmode_icache_lock_end,gr4 + +4: icul gr3 + addi gr3,#L1_CACHE_BYTES,gr3 + cmp gr4,gr3,icc0 + bhi icc0,#0,4b + +#if 0 // Fujitsu recommend to skip this and will update docs. + # (15) Release the interrupt mask setting of the MASK register of + # the interrupt controller if necessary. + sti gr13,@(gr12,#0) +#endif + # (16) Set 1' in the PSR.ET bit, and permit interrupt. + movgs gr14,psr + + bralr + + .size frv_change_cmode, .-frv_change_cmode |
