diff options
Diffstat (limited to 'arch/blackfin')
67 files changed, 1016 insertions, 900 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index a949c4f..8f1f97d 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -169,26 +169,51 @@ config BF542 help BF542 Processor Support. +config BF542M + bool "BF542m" + help + BF542 Processor Support. + config BF544 bool "BF544" help BF544 Processor Support. +config BF544M + bool "BF544m" + help + BF544 Processor Support. + config BF547 bool "BF547" help BF547 Processor Support. +config BF547M + bool "BF547m" + help + BF547 Processor Support. + config BF548 bool "BF548" help BF548 Processor Support. +config BF548M + bool "BF548m" + help + BF548 Processor Support. + config BF549 bool "BF549" help BF549 Processor Support. +config BF549M + bool "BF549m" + help + BF549 Processor Support. + config BF561 bool "BF561" help @@ -224,39 +249,39 @@ config TICK_SOURCE_SYSTMR0 config BF_REV_MIN int - default 0 if (BF51x || BF52x || BF54x) + default 0 if (BF51x || BF52x || (BF54x && !BF54xM)) default 2 if (BF537 || BF536 || BF534) - default 3 if (BF561 ||BF533 || BF532 || BF531) + default 3 if (BF561 || BF533 || BF532 || BF531 || BF54xM) default 4 if (BF538 || BF539) config BF_REV_MAX int - default 2 if (BF51x || BF52x || BF54x) - default 3 if (BF537 || BF536 || BF534) + default 2 if (BF51x || BF52x || (BF54x && !BF54xM)) + default 3 if (BF537 || BF536 || BF534 || BF54xM) default 5 if (BF561 || BF538 || BF539) default 6 if (BF533 || BF532 || BF531) choice prompt "Silicon Rev" - default BF_REV_0_1 if (BF51x || BF52x || BF54x) + default BF_REV_0_1 if (BF51x || BF52x || (BF54x && !BF54xM)) default BF_REV_0_2 if (BF534 || BF536 || BF537) - default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF561) + default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF54xM || BF561) config BF_REV_0_0 bool "0.0" - depends on (BF51x || BF52x || BF54x) + depends on (BF51x || BF52x || (BF54x && !BF54xM)) config BF_REV_0_1 bool "0.1" - depends on (BF52x || BF54x) + depends on (BF52x || (BF54x && !BF54xM)) config BF_REV_0_2 bool "0.2" - depends on (BF52x || BF537 || BF536 || BF534 || BF54x) + depends on (BF52x || BF537 || BF536 || BF534 || (BF54x && !BF54xM)) config BF_REV_0_3 bool "0.3" - depends on (BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531) + depends on (BF54xM || BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531) config BF_REV_0_4 bool "0.4" @@ -293,9 +318,14 @@ config BF53x depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537) default y +config BF54xM + bool + depends on (BF542M || BF544M || BF547M || BF548M || BF549M) + default y + config BF54x bool - depends on (BF542 || BF544 || BF547 || BF548 || BF549) + depends on (BF542 || BF544 || BF547 || BF548 || BF549 || BF54xM) default y config MEM_GENERIC_BOARD diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index e550c8d..d54c828 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -21,57 +21,67 @@ KALLSYMS += --symbol-prefix=_ KBUILD_DEFCONFIG := BF537-STAMP_defconfig # setup the machine name and the machine dependent settings -machine-$(CONFIG_BF512) := bf518 -machine-$(CONFIG_BF514) := bf518 -machine-$(CONFIG_BF516) := bf518 -machine-$(CONFIG_BF518) := bf518 -machine-$(CONFIG_BF522) := bf527 -machine-$(CONFIG_BF523) := bf527 -machine-$(CONFIG_BF524) := bf527 -machine-$(CONFIG_BF525) := bf527 -machine-$(CONFIG_BF526) := bf527 -machine-$(CONFIG_BF527) := bf527 -machine-$(CONFIG_BF531) := bf533 -machine-$(CONFIG_BF532) := bf533 -machine-$(CONFIG_BF533) := bf533 -machine-$(CONFIG_BF534) := bf537 -machine-$(CONFIG_BF536) := bf537 -machine-$(CONFIG_BF537) := bf537 -machine-$(CONFIG_BF538) := bf538 -machine-$(CONFIG_BF539) := bf538 -machine-$(CONFIG_BF542) := bf548 -machine-$(CONFIG_BF544) := bf548 -machine-$(CONFIG_BF547) := bf548 -machine-$(CONFIG_BF548) := bf548 -machine-$(CONFIG_BF549) := bf548 -machine-$(CONFIG_BF561) := bf561 +machine-$(CONFIG_BF512) := bf518 +machine-$(CONFIG_BF514) := bf518 +machine-$(CONFIG_BF516) := bf518 +machine-$(CONFIG_BF518) := bf518 +machine-$(CONFIG_BF522) := bf527 +machine-$(CONFIG_BF523) := bf527 +machine-$(CONFIG_BF524) := bf527 +machine-$(CONFIG_BF525) := bf527 +machine-$(CONFIG_BF526) := bf527 +machine-$(CONFIG_BF527) := bf527 +machine-$(CONFIG_BF531) := bf533 +machine-$(CONFIG_BF532) := bf533 +machine-$(CONFIG_BF533) := bf533 +machine-$(CONFIG_BF534) := bf537 +machine-$(CONFIG_BF536) := bf537 +machine-$(CONFIG_BF537) := bf537 +machine-$(CONFIG_BF538) := bf538 +machine-$(CONFIG_BF539) := bf538 +machine-$(CONFIG_BF542) := bf548 +machine-$(CONFIG_BF542M) := bf548 +machine-$(CONFIG_BF544) := bf548 +machine-$(CONFIG_BF544M) := bf548 +machine-$(CONFIG_BF547) := bf548 +machine-$(CONFIG_BF547M) := bf548 +machine-$(CONFIG_BF548) := bf548 +machine-$(CONFIG_BF548M) := bf548 +machine-$(CONFIG_BF549) := bf548 +machine-$(CONFIG_BF549M) := bf548 +machine-$(CONFIG_BF561) := bf561 MACHINE := $(machine-y) export MACHINE -cpu-$(CONFIG_BF512) := bf512 -cpu-$(CONFIG_BF514) := bf514 -cpu-$(CONFIG_BF516) := bf516 -cpu-$(CONFIG_BF518) := bf518 -cpu-$(CONFIG_BF522) := bf522 -cpu-$(CONFIG_BF523) := bf523 -cpu-$(CONFIG_BF524) := bf524 -cpu-$(CONFIG_BF525) := bf525 -cpu-$(CONFIG_BF526) := bf526 -cpu-$(CONFIG_BF527) := bf527 -cpu-$(CONFIG_BF531) := bf531 -cpu-$(CONFIG_BF532) := bf532 -cpu-$(CONFIG_BF533) := bf533 -cpu-$(CONFIG_BF534) := bf534 -cpu-$(CONFIG_BF536) := bf536 -cpu-$(CONFIG_BF537) := bf537 -cpu-$(CONFIG_BF538) := bf538 -cpu-$(CONFIG_BF539) := bf539 -cpu-$(CONFIG_BF542) := bf542 -cpu-$(CONFIG_BF544) := bf544 -cpu-$(CONFIG_BF547) := bf547 -cpu-$(CONFIG_BF548) := bf548 -cpu-$(CONFIG_BF549) := bf549 -cpu-$(CONFIG_BF561) := bf561 +cpu-$(CONFIG_BF512) := bf512 +cpu-$(CONFIG_BF514) := bf514 +cpu-$(CONFIG_BF516) := bf516 +cpu-$(CONFIG_BF518) := bf518 +cpu-$(CONFIG_BF522) := bf522 +cpu-$(CONFIG_BF523) := bf523 +cpu-$(CONFIG_BF524) := bf524 +cpu-$(CONFIG_BF525) := bf525 +cpu-$(CONFIG_BF526) := bf526 +cpu-$(CONFIG_BF527) := bf527 +cpu-$(CONFIG_BF531) := bf531 +cpu-$(CONFIG_BF532) := bf532 +cpu-$(CONFIG_BF533) := bf533 +cpu-$(CONFIG_BF534) := bf534 +cpu-$(CONFIG_BF536) := bf536 +cpu-$(CONFIG_BF537) := bf537 +cpu-$(CONFIG_BF538) := bf538 +cpu-$(CONFIG_BF539) := bf539 +cpu-$(CONFIG_BF542) := bf542 +cpu-$(CONFIG_BF542M) := bf542m +cpu-$(CONFIG_BF544) := bf544 +cpu-$(CONFIG_BF544M) := bf544m +cpu-$(CONFIG_BF547) := bf547 +cpu-$(CONFIG_BF547M) := bf547m +cpu-$(CONFIG_BF548) := bf548 +cpu-$(CONFIG_BF548M) := bf548m +cpu-$(CONFIG_BF549) := bf549 +cpu-$(CONFIG_BF549M) := bf549m +cpu-$(CONFIG_BF561) := bf561 rev-$(CONFIG_BF_REV_0_0) := 0.0 rev-$(CONFIG_BF_REV_0_1) := 0.1 diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig index e0b3f24..4fdb9e0 100644 --- a/arch/blackfin/configs/BF518F-EZBRD_defconfig +++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.28-rc2 +# Fri Jan 9 17:58:41 2009 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -149,6 +150,7 @@ CONFIG_BF_REV_0_0=y # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF51x=y +CONFIG_MEM_MT48LC32M8A2_75=y CONFIG_BFIN518F_EZBRD=y # @@ -598,7 +600,10 @@ CONFIG_PHYLIB=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_BFIN_MAC is not set +CONFIG_BFIN_MAC=y +CONFIG_BFIN_TX_DESC_NUM=10 +CONFIG_BFIN_RX_DESC_NUM=20 +# CONFIG_BFIN_MAC_RMII is not set # CONFIG_SMC91X is not set # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set @@ -679,7 +684,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # @@ -746,9 +751,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set +# CONFIG_EEPROM_AT24 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig index 69f66c3..8e2b855 100644 --- a/arch/blackfin/configs/BF526-EZBRD_defconfig +++ b/arch/blackfin/configs/BF526-EZBRD_defconfig @@ -723,7 +723,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # @@ -793,9 +793,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set +# CONFIG_EEPROM_AT24 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -820,7 +820,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index f92668a..833128b 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -767,7 +767,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # @@ -837,9 +837,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set +# CONFIG_EEPROM_AT24 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -864,7 +864,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 92afd98..334c94b 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -672,7 +672,7 @@ CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # @@ -719,7 +719,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index 49eabb4..9d73343 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -679,7 +679,7 @@ CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # @@ -743,9 +743,9 @@ CONFIG_I2C_HELPER_AUTO=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set +# CONFIG_EEPROM_AT24 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -770,7 +770,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index 332142f..4fb4108 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -722,7 +722,7 @@ CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # @@ -794,9 +794,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set +# CONFIG_EEPROM_AT24 is not set CONFIG_SENSORS_AD5252=m -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -821,7 +821,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig index ed15934..cb32f56 100644 --- a/arch/blackfin/configs/BF538-EZKIT_defconfig +++ b/arch/blackfin/configs/BF538-EZKIT_defconfig @@ -726,7 +726,7 @@ CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # @@ -796,9 +796,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set +# CONFIG_EEPROM_AT24 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -823,7 +823,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index d4ed9ce..0f869761 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -856,7 +856,7 @@ CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # @@ -928,9 +928,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set +# CONFIG_EEPROM_AT24 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -955,7 +955,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index 1ecb7a3..042c7ad 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -709,7 +709,7 @@ CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set -# CONFIG_BFIN_JTAG_COMM is not set +CONFIG_BFIN_JTAG_COMM=m # CONFIG_SERIAL_NONSTANDARD is not set # @@ -756,7 +756,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig index 9683b2e..3a20e28 100644 --- a/arch/blackfin/configs/BlackStamp_defconfig +++ b/arch/blackfin/configs/BlackStamp_defconfig @@ -691,7 +691,7 @@ CONFIG_I2C_GPIO=m # # CONFIG_DS1682 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -713,7 +713,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -CONFIG_SPI_AT25=y +CONFIG_EEPROM_AT25=y CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig index a041e7e..865ed85 100644 --- a/arch/blackfin/configs/CM-BF527_defconfig +++ b/arch/blackfin/configs/CM-BF527_defconfig @@ -1,7 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24.7 -# Fri Jul 18 18:00:41 2008 +# Linux kernel version: 2.6.28 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -9,7 +8,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_BLACKFIN=y CONFIG_ZONE_DMA=y -CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y @@ -32,18 +30,16 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -52,26 +48,35 @@ CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -82,6 +87,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -95,9 +101,11 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set +# CONFIG_FREEZER is not set # # Blackfin Processor Options @@ -106,6 +114,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # # Processor and Board Settings # +# CONFIG_BF512 is not set +# CONFIG_BF514 is not set +# CONFIG_BF516 is not set +# CONFIG_BF518 is not set # CONFIG_BF522 is not set # CONFIG_BF523 is not set # CONFIG_BF524 is not set @@ -118,48 +130,32 @@ CONFIG_BF527=y # CONFIG_BF534 is not set # CONFIG_BF536 is not set # CONFIG_BF537 is not set +# CONFIG_BF538 is not set +# CONFIG_BF539 is not set # CONFIG_BF542 is not set +# CONFIG_BF542M is not set # CONFIG_BF544 is not set +# CONFIG_BF544M is not set # CONFIG_BF547 is not set +# CONFIG_BF547M is not set # CONFIG_BF548 is not set +# CONFIG_BF548M is not set # CONFIG_BF549 is not set +# CONFIG_BF549M is not set # CONFIG_BF561 is not set +CONFIG_BF_REV_MIN=0 +CONFIG_BF_REV_MAX=2 # CONFIG_BF_REV_0_0 is not set CONFIG_BF_REV_0_1=y # CONFIG_BF_REV_0_2 is not set # CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_0_6 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF52x=y CONFIG_MEM_MT48LC16M16A2TG_75=y -# CONFIG_BFIN527_EZKIT is not set -CONFIG_BFIN527_BLUETECHNIX_CM=y - -# -# BF527 Specific Configuration -# - -# -# Alternative Multiplexing Scheme -# -# CONFIG_BF527_SPORT0_PORTF is not set -CONFIG_BF527_SPORT0_PORTG=y -CONFIG_BF527_SPORT0_TSCLK_PG10=y -# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set -CONFIG_BF527_UART1_PORTF=y -# CONFIG_BF527_UART1_PORTG is not set -# CONFIG_BF527_NAND_D_PORTF is not set -CONFIG_BF527_NAND_D_PORTH=y - -# -# Interrupt Priority Assignment -# - -# -# Priority -# CONFIG_IRQ_PLL_WAKEUP=7 CONFIG_IRQ_DMA0_ERROR=7 CONFIG_IRQ_DMAR0_BLK=7 @@ -179,7 +175,6 @@ CONFIG_IRQ_SPORT0_TX=9 CONFIG_IRQ_SPORT1_RX=9 CONFIG_IRQ_SPORT1_TX=9 CONFIG_IRQ_TWI=10 -CONFIG_IRQ_SPI=10 CONFIG_IRQ_UART0_RX=10 CONFIG_IRQ_UART0_TX=10 CONFIG_IRQ_UART1_RX=10 @@ -205,6 +200,34 @@ CONFIG_IRQ_MEM_DMA1=13 CONFIG_IRQ_WATCH=13 CONFIG_IRQ_PORTF_INTA=13 CONFIG_IRQ_PORTF_INTB=13 +# CONFIG_BFIN527_EZKIT is not set +CONFIG_BFIN527_BLUETECHNIX_CM=y +# CONFIG_BFIN526_EZBRD is not set + +# +# BF527 Specific Configuration +# + +# +# Alternative Multiplexing Scheme +# +# CONFIG_BF527_SPORT0_PORTF is not set +CONFIG_BF527_SPORT0_PORTG=y +CONFIG_BF527_SPORT0_TSCLK_PG10=y +# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set +CONFIG_BF527_UART1_PORTF=y +# CONFIG_BF527_UART1_PORTG is not set +# CONFIG_BF527_NAND_D_PORTF is not set +CONFIG_BF527_NAND_D_PORTH=y + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_SPI=10 CONFIG_IRQ_SPI_ERROR=7 CONFIG_IRQ_NFC_ERROR=7 CONFIG_IRQ_HDMA_ERROR=7 @@ -226,7 +249,6 @@ CONFIG_BOOT_LOAD=0x1000 # CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set -CONFIG_MAX_MEM_SIZE=512 CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 CONFIG_MAX_SCLK_HZ=133333333 @@ -240,10 +262,10 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_CYCLES_CLOCKSOURCE is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -277,6 +299,12 @@ CONFIG_ACCESS_OK_L1=y CONFIG_CACHELINE_ALIGNED_L1=y # CONFIG_SYSCALL_TAB_L1 is not set # CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_APP_STACK_L1=y + +# +# Speed Optimizations +# +CONFIG_BFIN_INS_LOWOVERHEAD=y CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -285,10 +313,10 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y CONFIG_BFIN_GPTIMERS=y @@ -334,7 +362,6 @@ CONFIG_BANK_3=0xFFC0 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # -# CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set @@ -345,25 +372,20 @@ CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set -CONFIG_SUSPEND_UP_POSSIBLE=y -# CONFIG_PM_BFIN_SLEEP_DEEPER is not set -# CONFIG_PM_BFIN_SLEEP is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM_WAKEUP_BY_GPIO is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set - -# -# Networking -# CONFIG_NET=y # @@ -376,6 +398,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -405,8 +428,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -415,6 +436,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -431,14 +453,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -456,6 +478,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -464,6 +488,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -507,6 +532,7 @@ CONFIG_MTD_ROM=m # CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_GPIO_ADDR is not set # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -542,10 +568,12 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -558,7 +586,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -579,6 +606,7 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -591,11 +619,14 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_SMC91X is not set # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -604,6 +635,7 @@ CONFIG_BFIN_MAC_RMII=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -616,7 +648,6 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -642,14 +673,15 @@ CONFIG_BFIN_MAC_RMII=y # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set -CONFIG_BFIN_OTP=y -# CONFIG_BFIN_OTP_WRITE_ENABLE is not set +# CONFIG_BF5xx_EPPI is not set # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_TWI_LCD is not set +CONFIG_BFIN_DMA_INTERFACE=m CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_DEVKMEM is not set +# CONFIG_BFIN_JTAG_COMM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -673,6 +705,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set +CONFIG_BFIN_OTP=y +# CONFIG_BFIN_OTP_WRITE_ENABLE is not set # # CAN, the car bus and industrial fieldbus @@ -680,44 +714,49 @@ CONFIG_UNIX98_PTYS=y # CONFIG_CAN4LINUX is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m +CONFIG_I2C_HELPER_AUTO=y # -# I2C Algorithms +# I2C Hardware Bus support # -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set # -# I2C Hardware Bus support +# I2C system bus drivers (mostly embedded / system-on-chip) # CONFIG_I2C_BLACKFIN_TWI=m CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set # +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_AD5252 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8575 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set @@ -726,17 +765,15 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # CONFIG_SPI_BFIN=y +# CONFIG_SPI_BFIN_LOCK is not set # CONFIG_SPI_BITBANG is not set # @@ -745,18 +782,24 @@ CONFIG_SPI_BFIN=y # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -777,6 +820,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -785,6 +829,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set @@ -792,9 +837,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -810,21 +858,31 @@ CONFIG_BFIN_WDT=y # CONFIG_USBPCWATCHDOG is not set # -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -839,10 +897,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -850,6 +904,7 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -860,40 +915,48 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set CONFIG_USB_OTG_BLACKLIST_HUB=y +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set CONFIG_USB_MUSB_HDRC=y CONFIG_USB_MUSB_SOC=y # -# Blackfin high speed USB support +# Blackfin high speed USB Support # CONFIG_USB_MUSB_HOST=y # CONFIG_USB_MUSB_PERIPHERAL is not set # CONFIG_USB_MUSB_OTG is not set CONFIG_USB_MUSB_HDRC_HCD=y CONFIG_MUSB_PIO_ONLY=y -CONFIG_USB_MUSB_LOGLEVEL=0 +CONFIG_MUSB_DMA_POLL=y +# CONFIG_USB_MUSB_DEBUG is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # # CONFIG_USB_LIBUSUAL is not set @@ -901,15 +964,10 @@ CONFIG_USB_MUSB_LOGLEVEL=0 # USB Imaging devices # # CONFIG_USB_MDC800 is not set -CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -918,7 +976,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -934,17 +992,13 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -973,51 +1027,59 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # -# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # CONFIG_RTC_DRV_BFIN=y - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1059,8 +1121,11 @@ CONFIG_SYSFS=y # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1068,13 +1133,12 @@ CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1130,7 +1194,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -1138,14 +1201,61 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set + +# +# Tracers +# +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_KGDB_TESTCASE is not set +CONFIG_DEBUG_VERBOSE=y CONFIG_DEBUG_MMRS=y +# CONFIG_DEBUG_HWERR is not set +# CONFIG_DEBUG_DOUBLEFAULT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y @@ -1154,7 +1264,7 @@ CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 # CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set -CONFIG_EARLY_PRINTK=y +# CONFIG_EARLY_PRINTK is not set # CONFIG_CPLB_INFO is not set CONFIG_ACCESS_CHECK=y @@ -1163,10 +1273,96 @@ CONFIG_ACCESS_CHECK=y # # CONFIG_KEYS is not set CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set -# CONFIG_SECURITY_CAPABILITIES is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set -# CONFIG_CRYPTO is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y # # Library routines @@ -1174,6 +1370,7 @@ CONFIG_SECURITY=y CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig index efd68bc..efe9741 100644 --- a/arch/blackfin/configs/CM-BF548_defconfig +++ b/arch/blackfin/configs/CM-BF548_defconfig @@ -798,7 +798,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8575 is not set # CONFIG_SENSORS_PCA9543 is not set @@ -826,7 +826,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig index 5d3901d..bd553da 100644 --- a/arch/blackfin/configs/H8606_defconfig +++ b/arch/blackfin/configs/H8606_defconfig @@ -750,7 +750,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -CONFIG_SPI_AT25=y +CONFIG_EEPROM_AT25=y CONFIG_SPI_SPIDEV=y # diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig index e66f5da..eae83b5 100644 --- a/arch/blackfin/configs/IP0X_defconfig +++ b/arch/blackfin/configs/IP0X_defconfig @@ -803,7 +803,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig index ce5dde9d..ad09670 100644 --- a/arch/blackfin/configs/PNAV-10_defconfig +++ b/arch/blackfin/configs/PNAV-10_defconfig @@ -755,9 +755,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set +# CONFIG_EEPROM_AT24 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set CONFIG_SENSORS_PCF8574=m # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -781,7 +781,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig index 7c8250d..fa580af 100644 --- a/arch/blackfin/configs/SRV1_defconfig +++ b/arch/blackfin/configs/SRV1_defconfig @@ -798,7 +798,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8575 is not set # CONFIG_SENSORS_PCA9543 is not set @@ -826,7 +826,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -CONFIG_SPI_AT25=m +CONFIG_EEPROM_AT25=m # CONFIG_SPI_SPIDEV is not set # diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig index 9af522c..97a1f1d 100644 --- a/arch/blackfin/configs/TCM-BF537_defconfig +++ b/arch/blackfin/configs/TCM-BF537_defconfig @@ -533,7 +533,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild index d0d1ac4..606ecfd 100644 --- a/arch/blackfin/include/asm/Kbuild +++ b/arch/blackfin/include/asm/Kbuild @@ -1,4 +1,3 @@ include include/asm-generic/Kbuild.asm unifdef-y += fixed_code.h -unifdef-y += swab.h diff --git a/arch/blackfin/include/asm/byteorder.h b/arch/blackfin/include/asm/byteorder.h index b9e797a..3e69106 100644 --- a/arch/blackfin/include/asm/byteorder.h +++ b/arch/blackfin/include/asm/byteorder.h @@ -1,7 +1,6 @@ #ifndef _BLACKFIN_BYTEORDER_H #define _BLACKFIN_BYTEORDER_H -#include <asm/swab.h> #include <linux/byteorder/little_endian.h> #endif /* _BLACKFIN_BYTEORDER_H */ diff --git a/arch/blackfin/include/asm/checksum.h b/arch/blackfin/include/asm/checksum.h index f67289a..793581f 100644 --- a/arch/blackfin/include/asm/checksum.h +++ b/arch/blackfin/include/asm/checksum.h @@ -63,23 +63,23 @@ static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, unsigned short proto, __wsum sum) { - - __asm__ ("%0 = %0 + %1;\n\t" - "CC = AC0;\n\t" - "if !CC jump 4;\n\t" - "%0 = %0 + %4;\n\t" - "%0 = %0 + %2;\n\t" - "CC = AC0;\n\t" - "if !CC jump 4;\n\t" - "%0 = %0 + %4;\n\t" - "%0 = %0 + %3;\n\t" - "CC = AC0;\n\t" - "if !CC jump 4;\n\t" - "%0 = %0 + %4;\n\t" - "NOP;\n\t" - : "=d" (sum) - : "d" (daddr), "d" (saddr), "d" ((ntohs(len)<<16)+proto*256), "d" (1), "0"(sum) - : "CC"); + unsigned int carry; + + __asm__ ("%0 = %0 + %2;\n\t" + "CC = AC0;\n\t" + "%1 = CC;\n\t" + "%0 = %0 + %1;\n\t" + "%0 = %0 + %3;\n\t" + "CC = AC0;\n\t" + "%1 = CC;\n\t" + "%0 = %0 + %1;\n\t" + "%0 = %0 + %4;\n\t" + "CC = AC0;\n\t" + "%1 = CC;\n\t" + "%0 = %0 + %1;\n\t" + : "=d" (sum), "=&d" (carry) + : "d" (daddr), "d" (saddr), "d" ((len + proto) << 8), "0"(sum) + : "CC"); return (sum); } diff --git a/arch/blackfin/include/asm/delay.h b/arch/blackfin/include/asm/delay.h index 0889c3a..c31f91c 100644 --- a/arch/blackfin/include/asm/delay.h +++ b/arch/blackfin/include/asm/delay.h @@ -13,29 +13,7 @@ static inline void __delay(unsigned long loops) { - if (ANOMALY_05000312) { - /* Interrupted loads to loop registers -> bad */ - unsigned long tmp; - __asm__ __volatile__( - "[--SP] = LC0;" - "[--SP] = LT0;" - "[--SP] = LB0;" - "LSETUP (1f,1f) LC0 = %1;" - "1: NOP;" - /* We take advantage of the fact that LC0 is 0 at - * the end of the loop. Otherwise we'd need some - * NOPs after the CLI here. - */ - "CLI %0;" - "LB0 = [SP++];" - "LT0 = [SP++];" - "LC0 = [SP++];" - "STI %0;" - : "=d" (tmp) - : "a" (loops) - ); - } else - __asm__ __volatile__ ( +__asm__ __volatile__ ( "LSETUP(1f, 1f) LC0 = %0;" "1: NOP;" : @@ -47,16 +25,15 @@ static inline void __delay(unsigned long loops) #include <linux/param.h> /* needed for HZ */ /* - * Use only for very small delays ( < 1 msec). Should probably use a - * lookup table, really, as the multiplications take much too long with - * short delays. This is a "reasonable" implementation, though (and the - * first constant multiplications gets optimized away if the delay is - * a constant) + * close approximation borrowed from m68knommu to avoid 64-bit math */ + +#define HZSCALE (268435456 / (1000000/HZ)) + static inline void udelay(unsigned long usecs) { extern unsigned long loops_per_jiffy; - __delay(usecs * loops_per_jiffy / (1000000 / HZ)); + __delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6); } #endif diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h index 9477d82..d4a082ef 100644 --- a/arch/blackfin/include/asm/gpio.h +++ b/arch/blackfin/include/asm/gpio.h @@ -27,60 +27,6 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -/* -* Number BF537/6/4 BF561 BF533/2/1 -* BF527/5/2 -* -* GPIO_0 PF0 PF0 PF0 -* GPIO_1 PF1 PF1 PF1 -* GPIO_2 PF2 PF2 PF2 -* GPIO_3 PF3 PF3 PF3 -* GPIO_4 PF4 PF4 PF4 -* GPIO_5 PF5 PF5 PF5 -* GPIO_6 PF6 PF6 PF6 -* GPIO_7 PF7 PF7 PF7 -* GPIO_8 PF8 PF8 PF8 -* GPIO_9 PF9 PF9 PF9 -* GPIO_10 PF10 PF10 PF10 -* GPIO_11 PF11 PF11 PF11 -* GPIO_12 PF12 PF12 PF12 -* GPIO_13 PF13 PF13 PF13 -* GPIO_14 PF14 PF14 PF14 -* GPIO_15 PF15 PF15 PF15 -* GPIO_16 PG0 PF16 -* GPIO_17 PG1 PF17 -* GPIO_18 PG2 PF18 -* GPIO_19 PG3 PF19 -* GPIO_20 PG4 PF20 -* GPIO_21 PG5 PF21 -* GPIO_22 PG6 PF22 -* GPIO_23 PG7 PF23 -* GPIO_24 PG8 PF24 -* GPIO_25 PG9 PF25 -* GPIO_26 PG10 PF26 -* GPIO_27 PG11 PF27 -* GPIO_28 PG12 PF28 -* GPIO_29 PG13 PF29 -* GPIO_30 PG14 PF30 -* GPIO_31 PG15 PF31 -* GPIO_32 PH0 PF32 -* GPIO_33 PH1 PF33 -* GPIO_34 PH2 PF34 -* GPIO_35 PH3 PF35 -* GPIO_36 PH4 PF36 -* GPIO_37 PH5 PF37 -* GPIO_38 PH6 PF38 -* GPIO_39 PH7 PF39 -* GPIO_40 PH8 PF40 -* GPIO_41 PH9 PF41 -* GPIO_42 PH10 PF42 -* GPIO_43 PH11 PF43 -* GPIO_44 PH12 PF44 -* GPIO_45 PH13 PF45 -* GPIO_46 PH14 PF46 -* GPIO_47 PH15 PF47 -*/ - #ifndef __ARCH_BLACKFIN_GPIO_H__ #define __ARCH_BLACKFIN_GPIO_H__ @@ -295,10 +241,6 @@ int bfin_gpio_direction_output(unsigned gpio, int value); int bfin_gpio_get_value(unsigned gpio); void bfin_gpio_set_value(unsigned gpio, int value); -#ifndef BF548_FAMILY -#define bfin_gpio_set_value(gpio, value) set_gpio_data(gpio, value) -#endif - #ifdef CONFIG_GPIOLIB #include <asm-generic/gpio.h> /* cansleep wrappers */ diff --git a/arch/blackfin/include/asm/kgdb.h b/arch/blackfin/include/asm/kgdb.h index 26ebac6..c8b256d 100644 --- a/arch/blackfin/include/asm/kgdb.h +++ b/arch/blackfin/include/asm/kgdb.h @@ -1,32 +1,8 @@ -/* - * File: include/asm-blackfin/kgdb.h - * Based on: - * Author: Sonic Zhang - * - * Created: - * Description: - * - * Rev: $Id: kgdb_bfin_linux-2.6.x.patch 4934 2007-02-13 09:32:11Z sonicz $ - * - * Modified: - * Copyright 2005-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ +/* Blackfin KGDB header * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * Copyright 2005-2009 Analog Devices Inc. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * Licensed under the GPL-2 or later. */ #ifndef __ASM_BLACKFIN_KGDB_H__ @@ -37,17 +13,18 @@ /* gdb locks */ #define KGDB_MAX_NO_CPUS 8 -/************************************************************************/ -/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/ -/* at least NUMREGBYTES*2 are needed for register packets */ -/* Longer buffer is needed to list all threads */ +/* + * BUFMAX defines the maximum number of characters in inbound/outbound buffers. + * At least NUMREGBYTES*2 are needed for register packets. + * Longer buffer is needed to list all threads. + */ #define BUFMAX 2048 /* - * Note that this register image is different from - * the register image that Linux produces at interrupt time. - * - * Linux's register image is defined by struct pt_regs in ptrace.h. + * Note that this register image is different from + * the register image that Linux produces at interrupt time. + * + * Linux's register image is defined by struct pt_regs in ptrace.h. */ enum regnames { /* Core Registers */ @@ -104,14 +81,14 @@ enum regnames { BFIN_RETX, BFIN_RETN, BFIN_RETE, - + /* Pseudo Registers */ BFIN_PC, BFIN_CC, BFIN_EXTRA1, /* Address of .text section. */ BFIN_EXTRA2, /* Address of .data section. */ BFIN_EXTRA3, /* Address of .bss section. */ - BFIN_FDPIC_EXEC, + BFIN_FDPIC_EXEC, BFIN_FDPIC_INTERP, /* MMRs */ @@ -126,7 +103,7 @@ enum regnames { static inline void arch_kgdb_breakpoint(void) { - asm(" EXCPT 2;"); + asm("EXCPT 2;"); } #define BREAK_INSTR_SIZE 2 #define CACHE_FLUSH_IS_SAFE 1 diff --git a/arch/blackfin/include/asm/mem_init.h b/arch/blackfin/include/asm/mem_init.h index 255a931..61f7487 100644 --- a/arch/blackfin/include/asm/mem_init.h +++ b/arch/blackfin/include/asm/mem_init.h @@ -115,7 +115,7 @@ #define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num) /* Enable SCLK Out */ -#define mem_SDGCTL (0x80000000 | SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS) +#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS) #else #define mem_SDRRC CONFIG_MEM_SDRRC #define mem_SDGCTL CONFIG_MEM_SDGCTL diff --git a/arch/blackfin/include/asm/pda.h b/arch/blackfin/include/asm/pda.h index bd8d4a7..a671427 100644 --- a/arch/blackfin/include/asm/pda.h +++ b/arch/blackfin/include/asm/pda.h @@ -59,6 +59,7 @@ struct blackfin_pda { /* Per-processor Data Area */ unsigned long icplb_fault_addr; unsigned long retx; unsigned long seqstat; + unsigned int __nmi_count; /* number of times NMI asserted on this CPU */ }; extern struct blackfin_pda cpu_pda[]; diff --git a/arch/blackfin/include/asm/reboot.h b/arch/blackfin/include/asm/reboot.h index 4856d62..ae1e363 100644 --- a/arch/blackfin/include/asm/reboot.h +++ b/arch/blackfin/include/asm/reboot.h @@ -15,6 +15,6 @@ extern void native_machine_halt(void); extern void native_machine_power_off(void); /* common reboot workarounds */ -extern void bfin_gpio_reset_spi0_ssel1(void); +extern void bfin_reset_boot_spi_cs(unsigned short pin); #endif diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index 38a2333..4a92a86 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -15,6 +15,8 @@ else obj-y += time.o endif +CFLAGS_kgdb_test.o := -mlong-calls -O0 + obj-$(CONFIG_IPIPE) += ipipe.o obj-$(CONFIG_IPIPE_TRACE_MCOUNT) += mcount.o obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 07e02c0..8531693 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -249,6 +249,13 @@ static void __dma_memcpy(u32 daddr, s16 dmod, u32 saddr, s16 smod, size_t cnt, u spin_lock_irqsave(&mdma_lock, flags); + /* Force a sync in case a previous config reset on this channel + * occurred. This is needed so subsequent writes to DMA registers + * are not spuriously lost/corrupted. Do it under irq lock and + * without the anomaly version (because we are atomic already). + */ + __builtin_bfin_ssync(); + if (bfin_read_MDMA_S0_CONFIG()) while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) continue; diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 4c14331..51dac55 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -27,59 +27,6 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -/* -* Number BF537/6/4 BF561 BF533/2/1 BF549/8/4/2 -* -* GPIO_0 PF0 PF0 PF0 PA0...PJ13 -* GPIO_1 PF1 PF1 PF1 -* GPIO_2 PF2 PF2 PF2 -* GPIO_3 PF3 PF3 PF3 -* GPIO_4 PF4 PF4 PF4 -* GPIO_5 PF5 PF5 PF5 -* GPIO_6 PF6 PF6 PF6 -* GPIO_7 PF7 PF7 PF7 -* GPIO_8 PF8 PF8 PF8 -* GPIO_9 PF9 PF9 PF9 -* GPIO_10 PF10 PF10 PF10 -* GPIO_11 PF11 PF11 PF11 -* GPIO_12 PF12 PF12 PF12 -* GPIO_13 PF13 PF13 PF13 -* GPIO_14 PF14 PF14 PF14 -* GPIO_15 PF15 PF15 PF15 -* GPIO_16 PG0 PF16 -* GPIO_17 PG1 PF17 -* GPIO_18 PG2 PF18 -* GPIO_19 PG3 PF19 -* GPIO_20 PG4 PF20 -* GPIO_21 PG5 PF21 -* GPIO_22 PG6 PF22 -* GPIO_23 PG7 PF23 -* GPIO_24 PG8 PF24 -* GPIO_25 PG9 PF25 -* GPIO_26 PG10 PF26 -* GPIO_27 PG11 PF27 -* GPIO_28 PG12 PF28 -* GPIO_29 PG13 PF29 -* GPIO_30 PG14 PF30 -* GPIO_31 PG15 PF31 -* GPIO_32 PH0 PF32 -* GPIO_33 PH1 PF33 -* GPIO_34 PH2 PF34 -* GPIO_35 PH3 PF35 -* GPIO_36 PH4 PF36 -* GPIO_37 PH5 PF37 -* GPIO_38 PH6 PF38 -* GPIO_39 PH7 PF39 -* GPIO_40 PH8 PF40 -* GPIO_41 PH9 PF41 -* GPIO_42 PH10 PF42 -* GPIO_43 PH11 PF43 -* GPIO_44 PH12 PF44 -* GPIO_45 PH13 PF45 -* GPIO_46 PH14 PF46 -* GPIO_47 PH15 PF47 -*/ - #include <linux/delay.h> #include <linux/module.h> #include <linux/err.h> @@ -119,62 +66,61 @@ enum { #define AWA_DUMMY_READ(...) do { } while (0) #endif +static struct gpio_port_t * const gpio_array[] = { #if defined(BF533_FAMILY) || defined(BF538_FAMILY) -static struct gpio_port_t *gpio_bankb[] = { (struct gpio_port_t *) FIO_FLAG_D, -}; -#endif - -#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) -static struct gpio_port_t *gpio_bankb[] = { +#elif defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) (struct gpio_port_t *) PORTFIO, (struct gpio_port_t *) PORTGIO, (struct gpio_port_t *) PORTHIO, +#elif defined(BF561_FAMILY) + (struct gpio_port_t *) FIO0_FLAG_D, + (struct gpio_port_t *) FIO1_FLAG_D, + (struct gpio_port_t *) FIO2_FLAG_D, +#elif defined(BF548_FAMILY) + (struct gpio_port_t *)PORTA_FER, + (struct gpio_port_t *)PORTB_FER, + (struct gpio_port_t *)PORTC_FER, + (struct gpio_port_t *)PORTD_FER, + (struct gpio_port_t *)PORTE_FER, + (struct gpio_port_t *)PORTF_FER, + (struct gpio_port_t *)PORTG_FER, + (struct gpio_port_t *)PORTH_FER, + (struct gpio_port_t *)PORTI_FER, + (struct gpio_port_t *)PORTJ_FER, +#else +# error no gpio arrays defined +#endif }; -static unsigned short *port_fer[] = { +#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) +static unsigned short * const port_fer[] = { (unsigned short *) PORTF_FER, (unsigned short *) PORTG_FER, (unsigned short *) PORTH_FER, }; -#endif -#if defined(BF527_FAMILY) || defined(BF518_FAMILY) -static unsigned short *port_mux[] = { +# if !defined(BF537_FAMILY) +static unsigned short * const port_mux[] = { (unsigned short *) PORTF_MUX, (unsigned short *) PORTG_MUX, (unsigned short *) PORTH_MUX, }; static const -u8 pmux_offset[][16] = - {{ 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */ - { 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */ - { 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */ - }; -#endif - -#ifdef BF561_FAMILY -static struct gpio_port_t *gpio_bankb[] = { - (struct gpio_port_t *) FIO0_FLAG_D, - (struct gpio_port_t *) FIO1_FLAG_D, - (struct gpio_port_t *) FIO2_FLAG_D, +u8 pmux_offset[][16] = { +# if defined(BF527_FAMILY) + { 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 4, 6, 8, 8, 10, 10 }, /* PORTF */ + { 0, 0, 0, 0, 0, 2, 2, 4, 4, 6, 8, 10, 10, 10, 12, 12 }, /* PORTG */ + { 0, 0, 0, 0, 0, 0, 0, 0, 2, 4, 4, 4, 4, 4, 4, 4 }, /* PORTH */ +# elif defined(BF518_FAMILY) + { 0, 2, 2, 2, 2, 2, 2, 4, 6, 6, 6, 8, 8, 8, 8, 10 }, /* PORTF */ + { 0, 0, 0, 2, 4, 6, 6, 6, 8, 10, 10, 12, 14, 14, 14, 14 }, /* PORTG */ + { 0, 0, 0, 0, 2, 2, 4, 6, 10, 10, 10, 10, 10, 10, 10, 10 }, /* PORTH */ +# endif }; -#endif +# endif -#ifdef BF548_FAMILY -static struct gpio_port_t *gpio_array[] = { - (struct gpio_port_t *)PORTA_FER, - (struct gpio_port_t *)PORTB_FER, - (struct gpio_port_t *)PORTC_FER, - (struct gpio_port_t *)PORTD_FER, - (struct gpio_port_t *)PORTE_FER, - (struct gpio_port_t *)PORTF_FER, - (struct gpio_port_t *)PORTG_FER, - (struct gpio_port_t *)PORTH_FER, - (struct gpio_port_t *)PORTI_FER, - (struct gpio_port_t *)PORTJ_FER, -}; #endif static unsigned short reserved_gpio_map[GPIO_BANK_NUM]; @@ -188,35 +134,9 @@ static struct str_ident { } str_ident[MAX_RESOURCES]; #if defined(CONFIG_PM) -#if defined(CONFIG_BF54x) -static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM]; -#else -static unsigned short wakeup_map[GPIO_BANK_NUM]; -static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS]; static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM]; - -#ifdef BF533_FAMILY -static unsigned int sic_iwr_irqs[] = {IRQ_PROG_INTB}; -#endif - -#ifdef BF537_FAMILY -static unsigned int sic_iwr_irqs[] = {IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX}; -#endif - -#ifdef BF538_FAMILY -static unsigned int sic_iwr_irqs[] = {IRQ_PORTF_INTB}; #endif -#if defined(BF527_FAMILY) || defined(BF518_FAMILY) -static unsigned int sic_iwr_irqs[] = {IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB}; -#endif - -#ifdef BF561_FAMILY -static unsigned int sic_iwr_irqs[] = {IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB}; -#endif -#endif -#endif /* CONFIG_PM */ - inline int check_gpio(unsigned gpio) { #if defined(BF548_FAMILY) @@ -330,9 +250,10 @@ static struct { {.res = P_SPI0_SSEL3, .offset = 0}, }; -static void portmux_setup(unsigned short per, unsigned short function) +static void portmux_setup(unsigned short per) { u16 y, offset, muxreg; + u16 function = P_FUNCT2MUX(per); for (y = 0; y < ARRAY_SIZE(port_mux_lut); y++) { if (port_mux_lut[y].res == per) { @@ -353,30 +274,33 @@ static void portmux_setup(unsigned short per, unsigned short function) } } #elif defined(BF548_FAMILY) -inline void portmux_setup(unsigned short portno, unsigned short function) +inline void portmux_setup(unsigned short per) { u32 pmux; + u16 ident = P_IDENT(per); + u16 function = P_FUNCT2MUX(per); - pmux = gpio_array[gpio_bank(portno)]->port_mux; + pmux = gpio_array[gpio_bank(ident)]->port_mux; - pmux &= ~(0x3 << (2 * gpio_sub_n(portno))); - pmux |= (function & 0x3) << (2 * gpio_sub_n(portno)); + pmux &= ~(0x3 << (2 * gpio_sub_n(ident))); + pmux |= (function & 0x3) << (2 * gpio_sub_n(ident)); - gpio_array[gpio_bank(portno)]->port_mux = pmux; + gpio_array[gpio_bank(ident)]->port_mux = pmux; } -inline u16 get_portmux(unsigned short portno) +inline u16 get_portmux(unsigned short per) { u32 pmux; + u16 ident = P_IDENT(per); - pmux = gpio_array[gpio_bank(portno)]->port_mux; + pmux = gpio_array[gpio_bank(ident)]->port_mux; - return (pmux >> (2 * gpio_sub_n(portno)) & 0x3); + return (pmux >> (2 * gpio_sub_n(ident)) & 0x3); } #elif defined(BF527_FAMILY) || defined(BF518_FAMILY) -inline void portmux_setup(unsigned short portno, unsigned short function) +inline void portmux_setup(unsigned short per) { - u16 pmux, ident = P_IDENT(portno); + u16 pmux, ident = P_IDENT(per), function = P_FUNCT2MUX(per); u8 offset = pmux_offset[gpio_bank(ident)][gpio_sub_n(ident)]; pmux = *port_mux[gpio_bank(ident)]; @@ -424,90 +348,71 @@ void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ unsigned long flags; \ local_irq_save_hw(flags); \ if (arg) \ - gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \ + gpio_array[gpio_bank(gpio)]->name |= gpio_bit(gpio); \ else \ - gpio_bankb[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \ + gpio_array[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \ AWA_DUMMY_READ(name); \ local_irq_restore_hw(flags); \ } \ EXPORT_SYMBOL(set_gpio_ ## name); -SET_GPIO(dir) -SET_GPIO(inen) -SET_GPIO(polar) -SET_GPIO(edge) -SET_GPIO(both) +SET_GPIO(dir) /* set_gpio_dir() */ +SET_GPIO(inen) /* set_gpio_inen() */ +SET_GPIO(polar) /* set_gpio_polar() */ +SET_GPIO(edge) /* set_gpio_edge() */ +SET_GPIO(both) /* set_gpio_both() */ -#if ANOMALY_05000311 || ANOMALY_05000323 #define SET_GPIO_SC(name) \ void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ { \ unsigned long flags; \ - local_irq_save_hw(flags); \ - if (arg) \ - gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ - else \ - gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \ - AWA_DUMMY_READ(name); \ - local_irq_restore_hw(flags); \ -} \ -EXPORT_SYMBOL(set_gpio_ ## name); -#else -#define SET_GPIO_SC(name) \ -void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ -{ \ + if (ANOMALY_05000311 || ANOMALY_05000323) \ + local_irq_save_hw(flags); \ if (arg) \ - gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ + gpio_array[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ else \ - gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \ + gpio_array[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \ + if (ANOMALY_05000311 || ANOMALY_05000323) { \ + AWA_DUMMY_READ(name); \ + local_irq_restore_hw(flags); \ + } \ } \ EXPORT_SYMBOL(set_gpio_ ## name); -#endif SET_GPIO_SC(maska) SET_GPIO_SC(maskb) SET_GPIO_SC(data) -#if ANOMALY_05000311 || ANOMALY_05000323 void set_gpio_toggle(unsigned gpio) { unsigned long flags; - local_irq_save_hw(flags); - gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio); - AWA_DUMMY_READ(toggle); - local_irq_restore_hw(flags); -} -#else -void set_gpio_toggle(unsigned gpio) -{ - gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio); + if (ANOMALY_05000311 || ANOMALY_05000323) + local_irq_save_hw(flags); + gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio); + if (ANOMALY_05000311 || ANOMALY_05000323) { + AWA_DUMMY_READ(toggle); + local_irq_restore_hw(flags); + } } -#endif EXPORT_SYMBOL(set_gpio_toggle); /*Set current PORT date (16-bit word)*/ -#if ANOMALY_05000311 || ANOMALY_05000323 #define SET_GPIO_P(name) \ void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \ { \ unsigned long flags; \ - local_irq_save_hw(flags); \ - gpio_bankb[gpio_bank(gpio)]->name = arg; \ - AWA_DUMMY_READ(name); \ - local_irq_restore_hw(flags); \ + if (ANOMALY_05000311 || ANOMALY_05000323) \ + local_irq_save_hw(flags); \ + gpio_array[gpio_bank(gpio)]->name = arg; \ + if (ANOMALY_05000311 || ANOMALY_05000323) { \ + AWA_DUMMY_READ(name); \ + local_irq_restore_hw(flags); \ + } \ } \ EXPORT_SYMBOL(set_gpiop_ ## name); -#else -#define SET_GPIO_P(name) \ -void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \ -{ \ - gpio_bankb[gpio_bank(gpio)]->name = arg; \ -} \ -EXPORT_SYMBOL(set_gpiop_ ## name); -#endif SET_GPIO_P(data) SET_GPIO_P(dir) @@ -519,27 +424,21 @@ SET_GPIO_P(maska) SET_GPIO_P(maskb) /* Get a specific bit */ -#if ANOMALY_05000311 || ANOMALY_05000323 #define GET_GPIO(name) \ unsigned short get_gpio_ ## name(unsigned gpio) \ { \ unsigned long flags; \ unsigned short ret; \ - local_irq_save_hw(flags); \ - ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \ - AWA_DUMMY_READ(name); \ - local_irq_restore_hw(flags); \ + if (ANOMALY_05000311 || ANOMALY_05000323) \ + local_irq_save_hw(flags); \ + ret = 0x01 & (gpio_array[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \ + if (ANOMALY_05000311 || ANOMALY_05000323) { \ + AWA_DUMMY_READ(name); \ + local_irq_restore_hw(flags); \ + } \ return ret; \ } \ EXPORT_SYMBOL(get_gpio_ ## name); -#else -#define GET_GPIO(name) \ -unsigned short get_gpio_ ## name(unsigned gpio) \ -{ \ - return (0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio))); \ -} \ -EXPORT_SYMBOL(get_gpio_ ## name); -#endif GET_GPIO(data) GET_GPIO(dir) @@ -552,27 +451,21 @@ GET_GPIO(maskb) /*Get current PORT date (16-bit word)*/ -#if ANOMALY_05000311 || ANOMALY_05000323 #define GET_GPIO_P(name) \ unsigned short get_gpiop_ ## name(unsigned gpio) \ { \ unsigned long flags; \ unsigned short ret; \ - local_irq_save_hw(flags); \ - ret = (gpio_bankb[gpio_bank(gpio)]->name); \ - AWA_DUMMY_READ(name); \ - local_irq_restore_hw(flags); \ + if (ANOMALY_05000311 || ANOMALY_05000323) \ + local_irq_save_hw(flags); \ + ret = (gpio_array[gpio_bank(gpio)]->name); \ + if (ANOMALY_05000311 || ANOMALY_05000323) { \ + AWA_DUMMY_READ(name); \ + local_irq_restore_hw(flags); \ + } \ return ret; \ } \ EXPORT_SYMBOL(get_gpiop_ ## name); -#else -#define GET_GPIO_P(name) \ -unsigned short get_gpiop_ ## name(unsigned gpio) \ -{ \ - return (gpio_bankb[gpio_bank(gpio)]->name);\ -} \ -EXPORT_SYMBOL(get_gpiop_ ## name); -#endif GET_GPIO_P(data) GET_GPIO_P(dir) @@ -585,6 +478,26 @@ GET_GPIO_P(maskb) #ifdef CONFIG_PM + +static unsigned short wakeup_map[GPIO_BANK_NUM]; +static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS]; + +static const unsigned int sic_iwr_irqs[] = { +#if defined(BF533_FAMILY) + IRQ_PROG_INTB +#elif defined(BF537_FAMILY) + IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX +#elif defined(BF538_FAMILY) + IRQ_PORTF_INTB +#elif defined(BF527_FAMILY) || defined(BF518_FAMILY) + IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB +#elif defined(BF561_FAMILY) + IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB +#else +# error no SIC_IWR defined +#endif +}; + /*********************************************************** * * FUNCTIONS: Blackfin PM Setup API @@ -669,18 +582,18 @@ u32 bfin_pm_standby_setup(void) mask = wakeup_map[gpio_bank(i)]; bank = gpio_bank(i); - gpio_bank_saved[bank].maskb = gpio_bankb[bank]->maskb; - gpio_bankb[bank]->maskb = 0; + gpio_bank_saved[bank].maskb = gpio_array[bank]->maskb; + gpio_array[bank]->maskb = 0; if (mask) { #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) gpio_bank_saved[bank].fer = *port_fer[bank]; #endif - gpio_bank_saved[bank].inen = gpio_bankb[bank]->inen; - gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar; - gpio_bank_saved[bank].dir = gpio_bankb[bank]->dir; - gpio_bank_saved[bank].edge = gpio_bankb[bank]->edge; - gpio_bank_saved[bank].both = gpio_bankb[bank]->both; + gpio_bank_saved[bank].inen = gpio_array[bank]->inen; + gpio_bank_saved[bank].polar = gpio_array[bank]->polar; + gpio_bank_saved[bank].dir = gpio_array[bank]->dir; + gpio_bank_saved[bank].edge = gpio_array[bank]->edge; + gpio_bank_saved[bank].both = gpio_array[bank]->both; gpio_bank_saved[bank].reserved = reserved_gpio_map[bank]; @@ -700,7 +613,7 @@ u32 bfin_pm_standby_setup(void) } bfin_internal_set_wake(sic_iwr_irqs[bank], 1); - gpio_bankb[bank]->maskb_set = wakeup_map[gpio_bank(i)]; + gpio_array[bank]->maskb_set = wakeup_map[gpio_bank(i)]; } } @@ -721,18 +634,18 @@ void bfin_pm_standby_restore(void) #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) *port_fer[bank] = gpio_bank_saved[bank].fer; #endif - gpio_bankb[bank]->inen = gpio_bank_saved[bank].inen; - gpio_bankb[bank]->dir = gpio_bank_saved[bank].dir; - gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar; - gpio_bankb[bank]->edge = gpio_bank_saved[bank].edge; - gpio_bankb[bank]->both = gpio_bank_saved[bank].both; + gpio_array[bank]->inen = gpio_bank_saved[bank].inen; + gpio_array[bank]->dir = gpio_bank_saved[bank].dir; + gpio_array[bank]->polar = gpio_bank_saved[bank].polar; + gpio_array[bank]->edge = gpio_bank_saved[bank].edge; + gpio_array[bank]->both = gpio_bank_saved[bank].both; reserved_gpio_map[bank] = gpio_bank_saved[bank].reserved; bfin_internal_set_wake(sic_iwr_irqs[bank], 0); } - gpio_bankb[bank]->maskb = gpio_bank_saved[bank].maskb; + gpio_array[bank]->maskb = gpio_bank_saved[bank].maskb; } AWA_DUMMY_READ(maskb); } @@ -745,21 +658,21 @@ void bfin_gpio_pm_hibernate_suspend(void) bank = gpio_bank(i); #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) - gpio_bank_saved[bank].fer = *port_fer[bank]; + gpio_bank_saved[bank].fer = *port_fer[bank]; #if defined(BF527_FAMILY) || defined(BF518_FAMILY) - gpio_bank_saved[bank].mux = *port_mux[bank]; + gpio_bank_saved[bank].mux = *port_mux[bank]; #else - if (bank == 0) - gpio_bank_saved[bank].mux = bfin_read_PORT_MUX(); + if (bank == 0) + gpio_bank_saved[bank].mux = bfin_read_PORT_MUX(); #endif #endif - gpio_bank_saved[bank].data = gpio_bankb[bank]->data; - gpio_bank_saved[bank].inen = gpio_bankb[bank]->inen; - gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar; - gpio_bank_saved[bank].dir = gpio_bankb[bank]->dir; - gpio_bank_saved[bank].edge = gpio_bankb[bank]->edge; - gpio_bank_saved[bank].both = gpio_bankb[bank]->both; - gpio_bank_saved[bank].maska = gpio_bankb[bank]->maska; + gpio_bank_saved[bank].data = gpio_array[bank]->data; + gpio_bank_saved[bank].inen = gpio_array[bank]->inen; + gpio_bank_saved[bank].polar = gpio_array[bank]->polar; + gpio_bank_saved[bank].dir = gpio_array[bank]->dir; + gpio_bank_saved[bank].edge = gpio_array[bank]->edge; + gpio_bank_saved[bank].both = gpio_array[bank]->both; + gpio_bank_saved[bank].maska = gpio_array[bank]->maska; } AWA_DUMMY_READ(maska); @@ -770,27 +683,27 @@ void bfin_gpio_pm_hibernate_restore(void) int i, bank; for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { - bank = gpio_bank(i); + bank = gpio_bank(i); #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) #if defined(BF527_FAMILY) || defined(BF518_FAMILY) - *port_mux[bank] = gpio_bank_saved[bank].mux; + *port_mux[bank] = gpio_bank_saved[bank].mux; #else - if (bank == 0) - bfin_write_PORT_MUX(gpio_bank_saved[bank].mux); + if (bank == 0) + bfin_write_PORT_MUX(gpio_bank_saved[bank].mux); #endif - *port_fer[bank] = gpio_bank_saved[bank].fer; + *port_fer[bank] = gpio_bank_saved[bank].fer; #endif - gpio_bankb[bank]->inen = gpio_bank_saved[bank].inen; - gpio_bankb[bank]->dir = gpio_bank_saved[bank].dir; - gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar; - gpio_bankb[bank]->edge = gpio_bank_saved[bank].edge; - gpio_bankb[bank]->both = gpio_bank_saved[bank].both; + gpio_array[bank]->inen = gpio_bank_saved[bank].inen; + gpio_array[bank]->dir = gpio_bank_saved[bank].dir; + gpio_array[bank]->polar = gpio_bank_saved[bank].polar; + gpio_array[bank]->edge = gpio_bank_saved[bank].edge; + gpio_array[bank]->both = gpio_bank_saved[bank].both; - gpio_bankb[bank]->data_set = gpio_bank_saved[bank].data - | gpio_bank_saved[bank].dir; + gpio_array[bank]->data_set = gpio_bank_saved[bank].data + | gpio_bank_saved[bank].dir; - gpio_bankb[bank]->maska = gpio_bank_saved[bank].maska; + gpio_array[bank]->maska = gpio_bank_saved[bank].maska; } AWA_DUMMY_READ(maska); } @@ -817,12 +730,12 @@ void bfin_gpio_pm_hibernate_suspend(void) for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { bank = gpio_bank(i); - gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer; - gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux; - gpio_bank_saved[bank].data = gpio_array[bank]->port_data; - gpio_bank_saved[bank].data = gpio_array[bank]->port_data; - gpio_bank_saved[bank].inen = gpio_array[bank]->port_inen; - gpio_bank_saved[bank].dir = gpio_array[bank]->port_dir_set; + gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer; + gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux; + gpio_bank_saved[bank].data = gpio_array[bank]->data; + gpio_bank_saved[bank].data = gpio_array[bank]->data; + gpio_bank_saved[bank].inen = gpio_array[bank]->inen; + gpio_bank_saved[bank].dir = gpio_array[bank]->dir_set; } } @@ -831,21 +744,21 @@ void bfin_gpio_pm_hibernate_restore(void) int i, bank; for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { - bank = gpio_bank(i); - - gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux; - gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer; - gpio_array[bank]->port_inen = gpio_bank_saved[bank].inen; - gpio_array[bank]->port_dir_set = gpio_bank_saved[bank].dir; - gpio_array[bank]->port_set = gpio_bank_saved[bank].data - | gpio_bank_saved[bank].dir; + bank = gpio_bank(i); + + gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux; + gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer; + gpio_array[bank]->inen = gpio_bank_saved[bank].inen; + gpio_array[bank]->dir_set = gpio_bank_saved[bank].dir; + gpio_array[bank]->data_set = gpio_bank_saved[bank].data + | gpio_bank_saved[bank].dir; } } #endif unsigned short get_gpio_dir(unsigned gpio) { - return (0x01 & (gpio_array[gpio_bank(gpio)]->port_dir_clear >> gpio_sub_n(gpio))); + return (0x01 & (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio))); } EXPORT_SYMBOL(get_gpio_dir); @@ -905,9 +818,7 @@ int peripheral_request(unsigned short per, const char *label) */ #ifdef BF548_FAMILY - u16 funct = get_portmux(ident); - - if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) { + if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) { #else if (!(per & P_MAYSHARE)) { #endif @@ -931,11 +842,7 @@ int peripheral_request(unsigned short per, const char *label) anyway: reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident); -#ifdef BF548_FAMILY - portmux_setup(ident, P_FUNCT2MUX(per)); -#else - portmux_setup(per, P_FUNCT2MUX(per)); -#endif + portmux_setup(per); port_setup(ident, PERIPHERAL_USAGE); local_irq_restore_hw(flags); @@ -977,9 +884,6 @@ void peripheral_free(unsigned short per) if (!(per & P_DEFINED)) return; - if (check_gpio(ident) < 0) - return; - local_irq_save_hw(flags); if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) { @@ -1056,9 +960,15 @@ int bfin_gpio_request(unsigned gpio, const char *label) local_irq_restore_hw(flags); return -EBUSY; } - if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) + if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) { printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!" " (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio); + } +#ifndef BF548_FAMILY + else { /* Reset POLAR setting when acquiring a gpio for the first time */ + set_gpio_polar(gpio, 0); + } +#endif reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio); set_label(gpio, label); @@ -1078,6 +988,8 @@ void bfin_gpio_free(unsigned gpio) if (check_gpio(gpio) < 0) return; + might_sleep(); + local_irq_save_hw(flags); if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { @@ -1158,8 +1070,16 @@ void bfin_gpio_irq_free(unsigned gpio) local_irq_restore_hw(flags); } - +static inline void __bfin_gpio_direction_input(unsigned gpio) +{ #ifdef BF548_FAMILY + gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio); +#else + gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); +#endif + gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio); +} + int bfin_gpio_direction_input(unsigned gpio) { unsigned long flags; @@ -1170,125 +1090,85 @@ int bfin_gpio_direction_input(unsigned gpio) } local_irq_save_hw(flags); - gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); - gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); + __bfin_gpio_direction_input(gpio); + AWA_DUMMY_READ(inen); local_irq_restore_hw(flags); return 0; } EXPORT_SYMBOL(bfin_gpio_direction_input); -int bfin_gpio_direction_output(unsigned gpio, int value) +void bfin_gpio_irq_prepare(unsigned gpio) { +#ifdef BF548_FAMILY unsigned long flags; +#endif - if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { - gpio_error(gpio); - return -EINVAL; - } + port_setup(gpio, GPIO_USAGE); +#ifdef BF548_FAMILY local_irq_save_hw(flags); - gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio); - gpio_set_value(gpio, value); - gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio); + __bfin_gpio_direction_input(gpio); local_irq_restore_hw(flags); - - return 0; +#endif } -EXPORT_SYMBOL(bfin_gpio_direction_output); void bfin_gpio_set_value(unsigned gpio, int arg) { if (arg) - gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio); + gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio); else - gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio); + gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio); } EXPORT_SYMBOL(bfin_gpio_set_value); -int bfin_gpio_get_value(unsigned gpio) -{ - return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio))); -} -EXPORT_SYMBOL(bfin_gpio_get_value); - -void bfin_gpio_irq_prepare(unsigned gpio) +int bfin_gpio_direction_output(unsigned gpio, int value) { unsigned long flags; - port_setup(gpio, GPIO_USAGE); + if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { + gpio_error(gpio); + return -EINVAL; + } local_irq_save_hw(flags); - gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); - gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); - local_irq_restore_hw(flags); -} + gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); + gpio_set_value(gpio, value); +#ifdef BF548_FAMILY + gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio); #else + gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio); +#endif + + AWA_DUMMY_READ(dir); + local_irq_restore_hw(flags); + + return 0; +} +EXPORT_SYMBOL(bfin_gpio_direction_output); int bfin_gpio_get_value(unsigned gpio) { +#ifdef BF548_FAMILY + return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio))); +#else unsigned long flags; - int ret; if (unlikely(get_gpio_edge(gpio))) { + int ret; local_irq_save_hw(flags); set_gpio_edge(gpio, 0); ret = get_gpio_data(gpio); set_gpio_edge(gpio, 1); local_irq_restore_hw(flags); - return ret; } else return get_gpio_data(gpio); +#endif } EXPORT_SYMBOL(bfin_gpio_get_value); - -int bfin_gpio_direction_input(unsigned gpio) -{ - unsigned long flags; - - if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { - gpio_error(gpio); - return -EINVAL; - } - - local_irq_save_hw(flags); - gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); - gpio_bankb[gpio_bank(gpio)]->inen |= gpio_bit(gpio); - AWA_DUMMY_READ(inen); - local_irq_restore_hw(flags); - - return 0; -} -EXPORT_SYMBOL(bfin_gpio_direction_input); - -int bfin_gpio_direction_output(unsigned gpio, int value) -{ - unsigned long flags; - - if (!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { - gpio_error(gpio); - return -EINVAL; - } - - local_irq_save_hw(flags); - gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); - - if (value) - gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio); - else - gpio_bankb[gpio_bank(gpio)]->data_clear = gpio_bit(gpio); - - gpio_bankb[gpio_bank(gpio)]->dir |= gpio_bit(gpio); - AWA_DUMMY_READ(dir); - local_irq_restore_hw(flags); - - return 0; -} -EXPORT_SYMBOL(bfin_gpio_direction_output); - /* If we are booting from SPI and our board lacks a strong enough pull up, * the core can reset and execute the bootrom faster than the resistor can * pull the signal logically high. To work around this (common) error in @@ -1299,23 +1179,15 @@ EXPORT_SYMBOL(bfin_gpio_direction_output); * lives here as we need to force all the GPIO states w/out going through * BUG() checks and such. */ -void bfin_gpio_reset_spi0_ssel1(void) +void bfin_reset_boot_spi_cs(unsigned short pin) { - u16 gpio = P_IDENT(P_SPI0_SSEL1); - + unsigned short gpio = P_IDENT(pin); port_setup(gpio, GPIO_USAGE); - gpio_bankb[gpio_bank(gpio)]->data_set = gpio_bit(gpio); + gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio); AWA_DUMMY_READ(data_set); udelay(1); } -void bfin_gpio_irq_prepare(unsigned gpio) -{ - port_setup(gpio, GPIO_USAGE); -} - -#endif /*BF548_FAMILY */ - #if defined(CONFIG_PROC_FS) static int gpio_proc_read(char *buf, char **start, off_t offset, int len, int *unused_i, void *unused_v) @@ -1369,11 +1241,7 @@ int bfin_gpiolib_get_value(struct gpio_chip *chip, unsigned gpio) void bfin_gpiolib_set_value(struct gpio_chip *chip, unsigned gpio, int value) { -#ifdef BF548_FAMILY return bfin_gpio_set_value(gpio, value); -#else - return set_gpio_data(gpio, value); -#endif } int bfin_gpiolib_gpio_request(struct gpio_chip *chip, unsigned gpio) diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c index bdb9584..3e329a6 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c @@ -63,10 +63,8 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) dcplb_tbl[cpu][i_d].addr = 0; dcplb_tbl[cpu][i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB; -#if 0 icplb_tbl[cpu][i_i].addr = 0; - icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_4KB; -#endif + icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_1KB; /* Cover kernel memory with 4M pages. */ addr = 0; diff --git a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c index 376249a..8cbb47c 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c @@ -163,12 +163,14 @@ MGR_ATTR static int icplb_miss(int cpu) nr_icplb_supv_miss[cpu]++; base = 0; - for (idx = 0; idx < icplb_nr_bounds; idx++) { + idx = 0; + do { eaddr = icplb_bounds[idx].eaddr; if (addr < eaddr) break; base = eaddr; - } + } while (++idx < icplb_nr_bounds); + if (unlikely(idx == icplb_nr_bounds)) return CPLB_NO_ADDR_MATCH; @@ -208,12 +210,14 @@ MGR_ATTR static int dcplb_miss(int cpu) nr_dcplb_supv_miss[cpu]++; base = 0; - for (idx = 0; idx < dcplb_nr_bounds; idx++) { + idx = 0; + do { eaddr = dcplb_bounds[idx].eaddr; if (addr < eaddr) break; base = eaddr; - } + } while (++idx < dcplb_nr_bounds); + if (unlikely(idx == dcplb_nr_bounds)) return CPLB_NO_ADDR_MATCH; diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index ab8209c..75724ee 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -35,6 +35,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <asm/trace.h> +#include <asm/pda.h> static atomic_t irq_err_count; static spinlock_t irq_controller_lock; @@ -91,8 +92,13 @@ int show_interrupts(struct seq_file *p, void *v) seq_putc(p, '\n'); skip: spin_unlock_irqrestore(&irq_desc[i].lock, flags); - } else if (i == NR_IRQS) + } else if (i == NR_IRQS) { + seq_printf(p, "NMI: "); + for_each_online_cpu(j) + seq_printf(p, "%10u ", cpu_pda[j].__nmi_count); + seq_printf(p, " CORE Non Maskable Interrupt\n"); seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count)); + } return 0; } diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c index eeee8cb..53d08de 100644 --- a/arch/blackfin/kernel/reboot.c +++ b/arch/blackfin/kernel/reboot.c @@ -20,8 +20,8 @@ * reset while the Core B bit (on dual core parts) is cleared by * the core reset. */ -__attribute__((l1_text)) -static void _bfin_reset(void) +__attribute__ ((__l1_text__, __noreturn__)) +static void bfin_reset(void) { /* Wait for completion of "system" events such as cache line * line fills so that we avoid infinite stalls later on as @@ -30,7 +30,11 @@ static void _bfin_reset(void) */ __builtin_bfin_ssync(); - while (1) { + /* The bootrom checks to see how it was reset and will + * automatically perform a software reset for us when + * it starts executing after the core reset. + */ + if (ANOMALY_05000353 || ANOMALY_05000386) { /* Initiate System software reset. */ bfin_write_SWRST(0x7); @@ -50,6 +54,11 @@ static void _bfin_reset(void) /* Clear System software reset */ bfin_write_SWRST(0); + /* The BF526 ROM will crash during reset */ +#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__) + bfin_read_SWRST(); +#endif + /* Wait for the SWRST write to complete. Cannot rely on SSYNC * though as the System state is all reset now. */ @@ -60,22 +69,11 @@ static void _bfin_reset(void) : "a" (15 * 1) : "LC1", "LB1", "LT1" ); + } + while (1) /* Issue core reset */ asm("raise 1"); - } -} - -static void bfin_reset(void) -{ - if (ANOMALY_05000353 || ANOMALY_05000386) - _bfin_reset(); - else - /* the bootrom checks to see how it was reset and will - * automatically perform a software reset for us when - * it starts executing boot - */ - asm("raise 1;"); } __attribute__((weak)) diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index b2a8113..e5c1162 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -60,7 +60,7 @@ void __initdata *init_retx, *init_saved_retx, *init_saved_seqstat, #define BFIN_MEMMAP_MAX 128 /* number of entries in bfin_memmap */ #define BFIN_MEMMAP_RAM 1 #define BFIN_MEMMAP_RESERVED 2 -struct bfin_memmap { +static struct bfin_memmap { int nr_map; struct bfin_memmap_entry { unsigned long long addr; /* start of memory segment */ @@ -824,7 +824,15 @@ void __init setup_arch(char **cmdline_p) flash_probe(); #endif + printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF); + + /* Newer parts mirror SWRST bits in SYSCR */ +#if defined(CONFIG_BF53x) || defined(CONFIG_BF561) || \ + defined(CONFIG_BF538) || defined(CONFIG_BF539) _bfin_swrst = bfin_read_SWRST(); +#else + _bfin_swrst = bfin_read_SYSCR(); +#endif #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT bfin_write_SWRST(_bfin_swrst & ~DOUBLE_FAULT); @@ -853,7 +861,7 @@ void __init setup_arch(char **cmdline_p) else if (_bfin_swrst & RESET_SOFTWARE) printk(KERN_NOTICE "Reset caused by Software reset\n"); - printk(KERN_INFO "Blackfin support (C) 2004-2008 Analog Devices, Inc.\n"); + printk(KERN_INFO "Blackfin support (C) 2004-2009 Analog Devices, Inc.\n"); if (bfin_compiled_revid() == 0xffff) printk(KERN_INFO "Compiled for ADSP-%s Rev any\n", CPU); else if (bfin_compiled_revid() == -1) diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 5b0667d..ffe7fb5 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -673,6 +673,14 @@ static void decode_instruction(unsigned short *address) verbose_printk("RTI"); else if (opcode == 0x0012) verbose_printk("RTX"); + else if (opcode == 0x0013) + verbose_printk("RTN"); + else if (opcode == 0x0014) + verbose_printk("RTE"); + else if (opcode == 0x0025) + verbose_printk("EMUEXCPT"); + else if (opcode == 0x0040 && opcode <= 0x0047) + verbose_printk("STI R%i", opcode & 7); else if (opcode >= 0x0050 && opcode <= 0x0057) verbose_printk("JUMP (P%i)", opcode & 7); else if (opcode >= 0x0060 && opcode <= 0x0067) @@ -681,6 +689,10 @@ static void decode_instruction(unsigned short *address) verbose_printk("CALL (PC+P%i)", opcode & 7); else if (opcode >= 0x0080 && opcode <= 0x0087) verbose_printk("JUMP (PC+P%i)", opcode & 7); + else if (opcode >= 0x0090 && opcode <= 0x009F) + verbose_printk("RAISE 0x%x", opcode & 0xF); + else if (opcode >= 0x00A0 && opcode <= 0x00AF) + verbose_printk("EXCPT 0x%x", opcode & 0xF); else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF)) verbose_printk("IF !CC JUMP"); else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff)) @@ -820,11 +832,8 @@ void show_stack(struct task_struct *task, unsigned long *stack) decode_address(buf, (unsigned int)stack); printk(KERN_NOTICE " SP: [0x%p] %s\n", stack, buf); - addr = (unsigned int *)((unsigned int)stack & ~0x3F); - /* First thing is to look for a frame pointer */ - for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0; - addr < endstack; addr++, i++) { + for (addr = (unsigned int *)((unsigned int)stack & ~0xF); addr < endstack; addr++) { if (*addr & 0x1) continue; ins_addr = (unsigned short *)*addr; @@ -834,7 +843,8 @@ void show_stack(struct task_struct *task, unsigned long *stack) if (fp) { /* Let's check to see if it is a frame pointer */ - while (fp >= (addr - 1) && fp < endstack && fp) + while (fp >= (addr - 1) && fp < endstack + && fp && ((unsigned int) fp & 0x3) == 0) fp = (unsigned int *)*fp; if (fp == 0 || fp == endstack) { fp = addr - 1; @@ -1052,8 +1062,9 @@ void show_regs(struct pt_regs *fp) char buf [150]; struct irqaction *action; unsigned int i; - unsigned long flags; + unsigned long flags = 0; unsigned int cpu = smp_processor_id(); + unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic(); verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted()); verbose_printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n", @@ -1073,17 +1084,22 @@ void show_regs(struct pt_regs *fp) } verbose_printk(KERN_NOTICE " EXCAUSE : 0x%lx\n", fp->seqstat & SEQSTAT_EXCAUSE); - for (i = 6; i <= 15 ; i++) { + for (i = 2; i <= 15 ; i++) { if (fp->ipend & (1 << i)) { - decode_address(buf, bfin_read32(EVT0 + 4*i)); - verbose_printk(KERN_NOTICE " physical IVG%i asserted : %s\n", i, buf); + if (i != 4) { + decode_address(buf, bfin_read32(EVT0 + 4*i)); + verbose_printk(KERN_NOTICE " physical IVG%i asserted : %s\n", i, buf); + } else + verbose_printk(KERN_NOTICE " interrupts disabled\n"); } } /* if no interrupts are going off, don't print this out */ if (fp->ipend & ~0x3F) { for (i = 0; i < (NR_IRQS - 1); i++) { - spin_lock_irqsave(&irq_desc[i].lock, flags); + if (!in_atomic) + spin_lock_irqsave(&irq_desc[i].lock, flags); + action = irq_desc[i].action; if (!action) goto unlock; @@ -1096,7 +1112,8 @@ void show_regs(struct pt_regs *fp) } verbose_printk("\n"); unlock: - spin_unlock_irqrestore(&irq_desc[i].lock, flags); + if (!in_atomic) + spin_unlock_irqrestore(&irq_desc[i].lock, flags); } } diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c index 15f1351..0e17534 100644 --- a/arch/blackfin/mach-bf518/boards/ezbrd.c +++ b/arch/blackfin/mach-bf518/boards/ezbrd.c @@ -46,6 +46,7 @@ #include <asm/dpmc.h> #include <asm/bfin_sdh.h> #include <linux/spi/ad7877.h> +#include <net/dsa.h> /* * Name the Board for the /proc/cpuinfo @@ -104,8 +105,31 @@ static struct platform_device rtc_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, +}; +#endif + +#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) +static struct dsa_platform_data ksz8893m_switch_data = { + .mii_bus = &bfin_mii_bus.dev, + .netdev = &bfin_mac_device.dev, + .port_names[0] = NULL, + .port_names[1] = "eth%d", + .port_names[2] = "eth%d", + .port_names[3] = "cpu", +}; + +static struct platform_device ksz8893m_switch_device = { + .name = "dsa", + .id = 0, + .num_resources = 0, + .dev.platform_data = &ksz8893m_switch_data, }; #endif @@ -147,6 +171,15 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { }; #endif +#if defined(CONFIG_NET_DSA_KSZ8893M) \ + || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) +/* SPI SWITCH CHIP */ +static struct bfin5xx_spi_chip spi_switch_info = { + .enable_dma = 0, + .bits_per_word = 8, +}; +#endif + #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) static struct bfin5xx_spi_chip spi_mmc_chip_info = { .enable_dma = 1, @@ -226,6 +259,19 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif +#if defined(CONFIG_NET_DSA_KSZ8893M) \ + || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) + { + .modalias = "ksz8893m", + .max_speed_hz = 5000000, + .bus_num = 0, + .chip_select = 1, + .platform_data = NULL, + .controller_data = &spi_switch_info, + .mode = SPI_MODE_3, + }, +#endif + #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) { .modalias = "spi_mmc_dummy", @@ -473,7 +519,6 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif -#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) { @@ -487,7 +532,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif }; -#endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { @@ -584,9 +628,14 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif +#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE) + &ksz8893m_switch_device, +#endif + #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) &bfin_spi0_device, &bfin_spi1_device, @@ -632,12 +681,8 @@ static struct platform_device *stamp_devices[] __initdata = { static int __init ezbrd_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); - -#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); -#endif - platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; @@ -649,7 +694,7 @@ void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_gpio_reset_spi0_ssel1(); + bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } void bfin_get_ether_addr(char *addr) diff --git a/arch/blackfin/mach-bf518/include/mach/portmux.h b/arch/blackfin/mach-bf518/include/mach/portmux.h index ac16d54..f618b48 100644 --- a/arch/blackfin/mach-bf518/include/mach/portmux.h +++ b/arch/blackfin/mach-bf518/include/mach/portmux.h @@ -103,6 +103,8 @@ #define P_SPI1_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(2)) #define P_SPI1_SSEL5 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2)) +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2 + /* SPORT Port Mux */ #define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0)) #define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0)) diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index a2c3578..856c097 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -403,8 +403,13 @@ static struct platform_device isp1362_hcd_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -793,7 +798,6 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif -#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) { @@ -809,7 +813,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif }; -#endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { @@ -920,6 +923,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif @@ -968,27 +972,23 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_gpios_device, }; -static int __init stamp_init(void) +static int __init cm_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); - -#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); -#endif - platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; } -arch_initcall(stamp_init); +arch_initcall(cm_init); void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_gpio_reset_spi0_ssel1(); + bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } void bfin_get_ether_addr(char *addr) diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c index 0314bd3..83606fc 100644 --- a/arch/blackfin/mach-bf527/boards/ezbrd.c +++ b/arch/blackfin/mach-bf527/boards/ezbrd.c @@ -208,8 +208,13 @@ static struct platform_device rtc_device = { #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -590,7 +595,6 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif -#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) { @@ -604,7 +608,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif }; -#endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { @@ -720,6 +723,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif @@ -764,27 +768,23 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_gpios_device, }; -static int __init stamp_init(void) +static int __init ezbrd_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); - -#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); -#endif - platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; } -arch_initcall(stamp_init); +arch_initcall(ezbrd_init); void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_gpio_reset_spi0_ssel1(); + bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } void bfin_get_ether_addr(char *addr) diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 9454fb7..d086411 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -425,8 +425,13 @@ static struct platform_device isp1362_hcd_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -830,7 +835,6 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif -#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) { @@ -844,7 +848,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif }; -#endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { @@ -988,6 +991,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif @@ -1048,27 +1052,23 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_gpios_device, }; -static int __init stamp_init(void) +static int __init ezkit_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); - -#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); -#endif - platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; } -arch_initcall(stamp_init); +arch_initcall(ezkit_init); void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_gpio_reset_spi0_ssel1(); + bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } void bfin_get_ether_addr(char *addr) diff --git a/arch/blackfin/mach-bf527/include/mach/portmux.h b/arch/blackfin/mach-bf527/include/mach/portmux.h index 7f6da2c3..72b1652 100644 --- a/arch/blackfin/mach-bf527/include/mach/portmux.h +++ b/arch/blackfin/mach-bf527/include/mach/portmux.h @@ -73,6 +73,8 @@ #define P_HWAIT (P_DONTCARE) +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1 + #define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0)) #define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2)) #define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2)) diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c index 6ee607c..015c18f 100644 --- a/arch/blackfin/mach-bf533/boards/blackstamp.c +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -309,10 +309,8 @@ static struct platform_device i2c_gpio_device = { }; #endif -#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }; -#endif static const unsigned int cclk_vlev_datasheet[] = { @@ -390,10 +388,8 @@ static int __init blackstamp_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); -#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); -#endif ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); if (ret < 0) diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 07f9ad1..db96f33 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -441,7 +441,6 @@ static struct platform_device i2c_gpio_device = { }; #endif -#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE) { @@ -461,7 +460,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif }; -#endif static const unsigned int cclk_vlev_datasheet[] = { @@ -550,10 +548,8 @@ static int __init stamp_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); -#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); -#endif ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); if (ret < 0) diff --git a/arch/blackfin/mach-bf533/include/mach/portmux.h b/arch/blackfin/mach-bf533/include/mach/portmux.h index 685a265..2f59ce0 100644 --- a/arch/blackfin/mach-bf533/include/mach/portmux.h +++ b/arch/blackfin/mach-bf533/include/mach/portmux.h @@ -54,14 +54,11 @@ #define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2)) #define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1)) #define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0)) +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2 #define P_TMR2 (P_DONTCARE) #define P_TMR1 (P_DONTCARE) #define P_TMR0 (P_DONTCARE) #define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF1)) - - - - #endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index 6ac8e4d..9cd8fb2 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -479,8 +479,13 @@ static struct platform_device bfin_sport1_uart_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -591,6 +596,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index dd6e6bf..da710fd 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -262,8 +262,13 @@ static struct platform_device isp1362_hcd_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -662,6 +667,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif @@ -708,7 +714,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif }; -static int __init stamp_init(void) +static int __init generic_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); @@ -720,13 +726,13 @@ static int __init stamp_init(void) return 0; } -arch_initcall(stamp_init); +arch_initcall(generic_init); void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_gpio_reset_spi0_ssel1(); + bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index bb79534..db7d3a3 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -61,8 +61,13 @@ static struct platform_device rtc_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -324,6 +329,7 @@ static struct platform_device *minotaur_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif @@ -377,5 +383,5 @@ void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_gpio_reset_spi0_ssel1(); + bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 89de94f..590eb3a 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -198,8 +198,13 @@ static struct platform_device isp1362_hcd_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -529,6 +534,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif @@ -558,7 +564,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif }; -static int __init stamp_init(void) +static int __init pnav_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); @@ -569,7 +575,7 @@ static int __init stamp_init(void) return 0; } -arch_initcall(stamp_init); +arch_initcall(pnav_init); void bfin_get_ether_addr(char *addr) { diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index d812e25..cd04c5e 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -321,8 +321,13 @@ static struct platform_device isp1362_hcd_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -1068,7 +1073,6 @@ static struct adp5588_kpad_platform_data adp5588_kpad_data = { }; #endif -#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info[] = { #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE) { @@ -1102,7 +1106,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif }; -#endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { @@ -1217,6 +1220,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif @@ -1284,12 +1288,8 @@ static struct platform_device *stamp_devices[] __initdata = { static int __init stamp_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); - -#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info, ARRAY_SIZE(bfin_i2c_board_info)); -#endif - bfin_plat_nand_init(); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); @@ -1307,7 +1307,7 @@ void native_machine_restart(char *cmd) { /* workaround reboot hang when booting from SPI */ if ((bfin_read_SYSCR() & 0x7) == 0x3) - bfin_gpio_reset_spi0_ssel1(); + bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); } /* diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index 2f4b066..3f4f203 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -481,8 +481,13 @@ static struct platform_device bfin_sport1_uart_device = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mii_bus = { + .name = "bfin_mii_bus", +}; + static struct platform_device bfin_mac_device = { .name = "bfin_mac", + .dev.platform_data = &bfin_mii_bus, }; #endif @@ -593,6 +598,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mii_bus, &bfin_mac_device, #endif @@ -615,7 +621,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = { &bfin_gpios_device, }; -static int __init cm_bf537_init(void) +static int __init tcm_bf537_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices)); @@ -629,7 +635,7 @@ static int __init cm_bf537_init(void) return 0; } -arch_initcall(cm_bf537_init); +arch_initcall(tcm_bf537_init); void bfin_get_ether_addr(char *addr) { diff --git a/arch/blackfin/mach-bf537/include/mach/portmux.h b/arch/blackfin/mach-bf537/include/mach/portmux.h index 78fee6e..87285e7 100644 --- a/arch/blackfin/mach-bf537/include/mach/portmux.h +++ b/arch/blackfin/mach-bf537/include/mach/portmux.h @@ -31,6 +31,7 @@ #define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1)) #define P_TACLK0 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1)) #define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1)) +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1 #define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0)) #define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0)) diff --git a/arch/blackfin/mach-bf538/include/mach/portmux.h b/arch/blackfin/mach-bf538/include/mach/portmux.h index 1e031b5..c8db264 100644 --- a/arch/blackfin/mach-bf538/include/mach/portmux.h +++ b/arch/blackfin/mach-bf538/include/mach/portmux.h @@ -102,5 +102,6 @@ #define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2)) #define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1)) #define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0)) +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2 #endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 309c160..096e661 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -781,7 +781,6 @@ static struct platform_device i2c_bfin_twi1_device = { #endif #endif -#ifdef CONFIG_I2C_BOARDINFO static struct i2c_board_info __initdata bfin_i2c_board_info0[] = { }; @@ -800,7 +799,6 @@ static struct i2c_board_info __initdata bfin_i2c_board_info1[] = { #endif }; #endif -#endif #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include <linux/gpio_keys.h> @@ -956,14 +954,12 @@ static int __init ezkit_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); -#ifdef CONFIG_I2C_BOARDINFO i2c_register_board_info(0, bfin_i2c_board_info0, ARRAY_SIZE(bfin_i2c_board_info0)); #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ i2c_register_board_info(1, bfin_i2c_board_info1, ARRAY_SIZE(bfin_i2c_board_info1)); #endif -#endif platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h index 3b54309..23d03c5 100644 --- a/arch/blackfin/mach-bf548/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -175,6 +175,7 @@ #define ANOMALY_05000311 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000363 (0) +#define ANOMALY_05000380 (0) #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) diff --git a/arch/blackfin/mach-bf548/include/mach/bf548.h b/arch/blackfin/mach-bf548/include/mach/bf548.h index f0e5699..cd31f72 100644 --- a/arch/blackfin/mach-bf548/include/mach/bf548.h +++ b/arch/blackfin/mach-bf548/include/mach/bf548.h @@ -104,6 +104,18 @@ #define AMGCTLVAL (V_AMBEN | V_AMCKEN) +#if defined(CONFIG_BF542M) +# define CONFIG_BF542 +#elif defined(CONFIG_BF544M) +# define CONFIG_BF544 +#elif defined(CONFIG_BF547M) +# define CONFIG_BF547 +#elif defined(CONFIG_BF548M) +# define CONFIG_BF548 +#elif defined(CONFIG_BF549M) +# define CONFIG_BF549 +#endif + #if defined(CONFIG_BF542) # define CPU "BF542" # define CPUID 0x27de diff --git a/arch/blackfin/mach-bf548/include/mach/gpio.h b/arch/blackfin/mach-bf548/include/mach/gpio.h index bba82dc..3a20517 100644 --- a/arch/blackfin/mach-bf548/include/mach/gpio.h +++ b/arch/blackfin/mach-bf548/include/mach/gpio.h @@ -195,17 +195,17 @@ struct gpio_port_t { unsigned short port_fer; unsigned short dummy1; - unsigned short port_data; + unsigned short data; unsigned short dummy2; - unsigned short port_set; + unsigned short data_set; unsigned short dummy3; - unsigned short port_clear; + unsigned short data_clear; unsigned short dummy4; - unsigned short port_dir_set; + unsigned short dir_set; unsigned short dummy5; - unsigned short port_dir_clear; + unsigned short dir_clear; unsigned short dummy6; - unsigned short port_inen; + unsigned short inen; unsigned short dummy7; unsigned int port_mux; }; diff --git a/arch/blackfin/mach-bf548/include/mach/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h index 8177a56..ffb1d0a 100644 --- a/arch/blackfin/mach-bf548/include/mach/portmux.h +++ b/arch/blackfin/mach-bf548/include/mach/portmux.h @@ -125,6 +125,7 @@ #define P_KEY_COL2 (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(3)) #define P_KEY_COL3 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(3)) +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL1 #define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0)) #define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0)) #define P_SPI0_MOSI (P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(0)) diff --git a/arch/blackfin/mach-bf561/include/mach/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h index d7c5097..cf92229 100644 --- a/arch/blackfin/mach-bf561/include/mach/defBF561.h +++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h @@ -1106,6 +1106,8 @@ #define DLEN_8 0x0 /* PPI Data Length mask for DLEN=8 */ #define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */ #define POL 0x0000C000 /* PPI Signal Polarities */ +#define POLC 0x4000 /* PPI Clock Polarity */ +#define POLS 0x8000 /* PPI Frame Sync Polarity */ /* PPI_STATUS Masks */ #define FLD 0x00000400 /* Field Indicator */ diff --git a/arch/blackfin/mach-bf561/include/mach/portmux.h b/arch/blackfin/mach-bf561/include/mach/portmux.h index a6ee820..2e5ad63 100644 --- a/arch/blackfin/mach-bf561/include/mach/portmux.h +++ b/arch/blackfin/mach-bf561/include/mach/portmux.h @@ -85,5 +85,6 @@ #define P_SPI0_MOSI (P_DONTCARE) #define P_SPI0_MISO (P_DONTCARE) #define P_SPI0_SCK (P_DONTCARE) +#define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2 #endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c index 5d182ab..9dddb6f 100644 --- a/arch/blackfin/mach-common/clocks-init.c +++ b/arch/blackfin/mach-common/clocks-init.c @@ -14,6 +14,7 @@ #include <asm/clocks.h> #include <asm/mem_init.h> +#define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */ #define PLL_CTL_VAL \ (((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \ (PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0)) @@ -76,7 +77,7 @@ void init_clocks(void) bfin_write_PLL_DIV(CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); #ifdef EBIU_SDGCTL bfin_write_EBIU_SDRRC(mem_SDRRC); - bfin_write_EBIU_SDGCTL(mem_SDGCTL); + bfin_write_EBIU_SDGCTL((bfin_read_EBIU_SDGCTL() & SDGCTL_WIDTH) | mem_SDGCTL); #else bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ)); do_sync(); diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index fae7746..88de053 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -151,13 +151,6 @@ ENTRY(_ex_syscall) jump.s _bfin_return_from_exception; ENDPROC(_ex_syscall) -ENTRY(_ex_soft_bp) - r7 = retx; - r7 += -2; - retx = r7; - jump.s _ex_trap_c; -ENDPROC(_ex_soft_bp) - ENTRY(_ex_single_step) /* If we just returned from an interrupt, the single step event is for the RTI instruction. */ @@ -1087,7 +1080,7 @@ ENTRY(_ex_table) * EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined */ .long _ex_syscall /* 0x00 - User Defined - Linux Syscall */ - .long _ex_soft_bp /* 0x01 - User Defined - Software breakpoint */ + .long _ex_trap_c /* 0x01 - User Defined - Software breakpoint */ #ifdef CONFIG_KGDB .long _ex_trap_c /* 0x02 - User Defined - KGDB initial connection and break signal trap */ diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S index e1e42c0..698d4c0 100644 --- a/arch/blackfin/mach-common/head.S +++ b/arch/blackfin/mach-common/head.S @@ -17,6 +17,19 @@ __INIT +ENTRY(__init_clear_bss) + r2 = r2 - r1; + cc = r2 == 0; + if cc jump .L_bss_done; + r2 >>= 2; + p1 = r1; + p2 = r2; + lsetup (1f, 1f) lc0 = p2; +1: [p1++] = r0; +.L_bss_done: + rts; +ENDPROC(__init_clear_bss) + #define INITIAL_STACK (L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12) ENTRY(__start) @@ -144,6 +157,35 @@ ENTRY(__start) call _init_early_exception_vectors; #endif + r0 = 0 (x); + /* Zero out all of the fun bss regions */ +#if L1_DATA_A_LENGTH > 0 + r1.l = __sbss_l1; + r1.h = __sbss_l1; + r2.l = __ebss_l1; + r2.h = __ebss_l1; + call __init_clear_bss +#endif +#if L1_DATA_B_LENGTH > 0 + r1.l = __sbss_b_l1; + r1.h = __sbss_b_l1; + r2.l = __ebss_b_l1; + r2.h = __ebss_b_l1; + call __init_clear_bss +#endif +#if L2_LENGTH > 0 + r1.l = __sbss_l2; + r1.h = __sbss_l2; + r2.l = __ebss_l2; + r2.h = __ebss_l2; + call __init_clear_bss +#endif + r1.l = ___bss_start; + r1.h = ___bss_start; + r2.l = ___bss_stop; + r2.h = ___bss_stop; + call __init_clear_bss + /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ call _bfin_relocate_l1_mem; #ifdef CONFIG_BFIN_KERNEL_CLOCK @@ -185,19 +227,6 @@ ENDPROC(__start) # define WDOG_CTL WDOGA_CTL #endif -ENTRY(__init_clear_bss) - r2 = r2 - r1; - cc = r2 == 0; - if cc jump .L_bss_done; - r2 >>= 2; - p1 = r1; - p2 = r2; - lsetup (1f, 1f) lc0 = p2; -1: [p1++] = r0; -.L_bss_done: - rts; -ENDPROC(__init_clear_bss) - ENTRY(_real_start) /* Enable nested interrupts */ [--sp] = reti; @@ -209,35 +238,6 @@ ENTRY(_real_start) w[p0] = r0; ssync; - r0 = 0 (x); - /* Zero out all of the fun bss regions */ -#if L1_DATA_A_LENGTH > 0 - r1.l = __sbss_l1; - r1.h = __sbss_l1; - r2.l = __ebss_l1; - r2.h = __ebss_l1; - call __init_clear_bss -#endif -#if L1_DATA_B_LENGTH > 0 - r1.l = __sbss_b_l1; - r1.h = __sbss_b_l1; - r2.l = __ebss_b_l1; - r2.h = __ebss_b_l1; - call __init_clear_bss -#endif -#if L2_LENGTH > 0 - r1.l = __sbss_l2; - r1.h = __sbss_l2; - r2.l = __ebss_l2; - r2.h = __ebss_l2; - call __init_clear_bss -#endif - r1.l = ___bss_start; - r1.h = ___bss_start; - r2.l = ___bss_stop; - r2.h = ___bss_stop; - call __init_clear_bss - /* Pass the u-boot arguments to the global value command line */ R0 = R7; call _cmdline_init; diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S index 473df0f..43c4eb9 100644 --- a/arch/blackfin/mach-common/interrupt.S +++ b/arch/blackfin/mach-common/interrupt.S @@ -195,7 +195,7 @@ ENDPROC(_evt_ivhw) /* Interrupt routine for evt2 (NMI). * We don't actually use this, so just return. * For inner circle type details, please see: - * http://docs.blackfin.uclinux.org/doku.php?id=linux:nmi + * http://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:nmi */ ENTRY(_evt_nmi) .weak _evt_nmi diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 1bba603..2024945 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -1101,10 +1101,9 @@ int __init init_arch_irq(void) IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 | IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; -#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) \ - || defined(BF538_FAMILY) || defined(CONFIG_BF51x) +#ifdef SIC_IWR0 bfin_write_SIC_IWR0(IWR_DISABLE_ALL); -#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x) +# ifdef SIC_IWR1 /* BF52x/BF51x system reset does not properly reset SIC_IWR1 which * will screw up the bootrom as it relies on MDMA0/1 waking it * up from IDLE instructions. See this report for more info: @@ -1114,10 +1113,8 @@ int __init init_arch_irq(void) bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11)); else bfin_write_SIC_IWR1(IWR_DISABLE_ALL); -#else - bfin_write_SIC_IWR1(IWR_DISABLE_ALL); -#endif -# ifdef CONFIG_BF54x +# endif +# ifdef SIC_IWR2 bfin_write_SIC_IWR2(IWR_DISABLE_ALL); # endif #else diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index d3d70fd..f48a6ae 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -82,10 +82,9 @@ void bfin_pm_suspend_standby_enter(void) bfin_pm_standby_restore(); -#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) || \ - defined(CONFIG_BF538) || defined(CONFIG_BF539) || defined(CONFIG_BF51x) +#ifdef SIC_IWR0 bfin_write_SIC_IWR0(IWR_DISABLE_ALL); -#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x) +# ifdef SIC_IWR1 /* BF52x system reset does not properly reset SIC_IWR1 which * will screw up the bootrom as it relies on MDMA0/1 waking it * up from IDLE instructions. See this report for more info: @@ -95,10 +94,8 @@ void bfin_pm_suspend_standby_enter(void) bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11)); else bfin_write_SIC_IWR1(IWR_DISABLE_ALL); -#else - bfin_write_SIC_IWR1(IWR_DISABLE_ALL); -#endif -# ifdef CONFIG_BF54x +# endif +# ifdef SIC_IWR2 bfin_write_SIC_IWR2(IWR_DISABLE_ALL); # endif #else |
