diff options
Diffstat (limited to 'arch/blackfin/mach-bf537')
| -rw-r--r-- | arch/blackfin/mach-bf537/head.S | 79 |
1 files changed, 0 insertions, 79 deletions
diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index 0836bfd..2c4ae46 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -478,85 +478,6 @@ ENTRY(_start_dma_code) ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ -ENTRY(_bfin_reset) - /* No more interrupts to be handled*/ - CLI R6; - SSYNC; - -#if defined(CONFIG_MTD_M25P80) - /* - * The following code fix the SPI flash reboot issue, - * /CS signal of the chip which is using PF10 return to GPIO mode - */ - p0.h = hi(PORTF_FER); - p0.l = lo(PORTF_FER); - r0.l = 0x0000; - w[p0] = r0.l; - SSYNC; - - /* /CS return to high */ - p0.h = hi(PORTFIO); - p0.l = lo(PORTFIO); - r0.l = 0xFFFF; - w[p0] = r0.l; - SSYNC; - - /* Delay some time, This is necessary */ - r1.h = 0; - r1.l = 0x400; - p1 = r1; - lsetup (.L_delay_lab1, .L_delay_lab1_end) lc1 = p1; -.L_delay_lab1: - r0.h = 0; - r0.l = 0x8000; - p0 = r0; - lsetup (.L_delay_lab0, .L_delay_lab0_end) lc0 = p0; -.L_delay_lab0: - nop; -.L_delay_lab0_end: - nop; -.L_delay_lab1_end: - nop; -#endif - - /* Clear the IMASK register */ - p0.h = hi(IMASK); - p0.l = lo(IMASK); - r0 = 0x0; - [p0] = r0; - - /* Clear the ILAT register */ - p0.h = hi(ILAT); - p0.l = lo(ILAT); - r0 = [p0]; - [p0] = r0; - SSYNC; - - /* make sure SYSCR is set to use BMODE */ - P0.h = hi(SYSCR); - P0.l = lo(SYSCR); - R0.l = 0x0; - W[P0] = R0.l; - SSYNC; - - /* issue a system soft reset */ - P1.h = hi(SWRST); - P1.l = lo(SWRST); - R1.l = 0x0007; - W[P1] = R1; - SSYNC; - - /* clear system soft reset */ - R0.l = 0x0000; - W[P0] = R0; - SSYNC; - - /* issue core reset */ - raise 1; - - RTS; -ENDPROC(_bfin_reset) - .data /* |
