1 files changed, 0 insertions, 290 deletions
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
deleted file mode 100644
index 2f9cc33..0000000
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * DO NOT EDIT THIS FILE
- * This file is under version control at
- *   svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/
- * and can be replaced with that version at any time
- * DO NOT EDIT THIS FILE
- *
- * Copyright 2004-2011 Analog Devices Inc.
- * Licensed under the Clear BSD license.
- */
-
-/* This file should be up to date with:
- *  - Revision F, 05/23/2011; ADSP-BF526 Blackfin Processor Anomaly List
- *  - Revision I, 05/23/2011; ADSP-BF527 Blackfin Processor Anomaly List
- */
-
-#ifndef _MACH_ANOMALY_H_
-#define _MACH_ANOMALY_H_
-
-/* We do not support old silicon - sorry */
-#if __SILICON_REVISION__ < 0
-# error will not work on BF526/BF527 silicon version
-#endif
-
-#if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)
-# define ANOMALY_BF526 1
-#else
-# define ANOMALY_BF526 0
-#endif
-#if defined(__ADSPBF523__) || defined(__ADSPBF525__) || defined(__ADSPBF527__)
-# define ANOMALY_BF527 1
-#else
-# define ANOMALY_BF527 0
-#endif
-
-#define _ANOMALY_BF526(rev526) (ANOMALY_BF526 && __SILICON_REVISION__ rev526)
-#define _ANOMALY_BF527(rev527) (ANOMALY_BF527 && __SILICON_REVISION__ rev527)
-#define _ANOMALY_BF526_BF527(rev526, rev527) (_ANOMALY_BF526(rev526) || _ANOMALY_BF527(rev527))
-
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
-#define ANOMALY_05000074 (1)
-/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
-#define ANOMALY_05000119 (1)
-/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
-#define ANOMALY_05000122 (1)
-/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
-#define ANOMALY_05000245 (1)
-/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
-#define ANOMALY_05000254 (1)
-/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
-#define ANOMALY_05000265 (1)
-/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
-#define ANOMALY_05000310 (1)
-/* PPI Is Level-Sensitive on First Transfer In Single Frame Sync Modes */
-#define ANOMALY_05000313 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* Incorrect Access of OTP_STATUS During otp_write() Function */
-#define ANOMALY_05000328 (_ANOMALY_BF527(< 2))
-/* Host DMA Boot Modes Are Not Functional */
-#define ANOMALY_05000330 (_ANOMALY_BF527(< 2))
-/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
-#define ANOMALY_05000337 (_ANOMALY_BF527(< 2))
-/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
-#define ANOMALY_05000341 (_ANOMALY_BF527(< 2))
-/* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */
-#define ANOMALY_05000342 (_ANOMALY_BF527(< 2))
-/* USB Calibration Value Is Not Initialized */
-#define ANOMALY_05000346 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* USB Calibration Value to use */
-#define ANOMALY_05000346_value 0xE510
-/* Preboot Routine Incorrectly Alters Reset Value of USB Register */
-#define ANOMALY_05000347 (_ANOMALY_BF527(< 2))
-/* Security Features Are Not Functional */
-#define ANOMALY_05000348 (_ANOMALY_BF527(< 1))
-/* bfrom_SysControl() Firmware Function Performs Improper System Reset */
-#define ANOMALY_05000353 (_ANOMALY_BF526(< 1))
-/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
-#define ANOMALY_05000355 (_ANOMALY_BF527(< 2))
-/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
-#define ANOMALY_05000357 (_ANOMALY_BF527(< 2))
-/* Incorrect Revision Number in DSPID Register */
-#define ANOMALY_05000364 (_ANOMALY_BF527(== 1))
-/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
-#define ANOMALY_05000366 (1)
-/* Incorrect Default CSEL Value in PLL_DIV */
-#define ANOMALY_05000368 (_ANOMALY_BF527(< 2))
-/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (_ANOMALY_BF527(< 2))
-/* Authentication Fails To Initiate */
-#define ANOMALY_05000376 (_ANOMALY_BF527(< 2))
-/* Data Read From L3 Memory by USB DMA May be Corrupted */
-#define ANOMALY_05000380 (_ANOMALY_BF527(< 2))
-/* 8-Bit NAND Flash Boot Mode Not Functional */
-#define ANOMALY_05000382 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* Boot from OTP Memory Not Functional */
-#define ANOMALY_05000385 (_ANOMALY_BF527(< 2))
-/* bfrom_SysControl() Firmware Routine Not Functional */
-#define ANOMALY_05000386 (_ANOMALY_BF527(< 2))
-/* Programmable Preboot Settings Not Functional */
-#define ANOMALY_05000387 (_ANOMALY_BF527(< 2))
-/* CRC32 Checksum Support Not Functional */
-#define ANOMALY_05000388 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* Reset Vector Must Not Be in SDRAM Memory Space */
-#define ANOMALY_05000389 (_ANOMALY_BF527(< 2))
-/* pTempCurrent Not Present in ADI_BOOT_DATA Structure */
-#define ANOMALY_05000392 (_ANOMALY_BF527(< 2))
-/* Deprecated Value of dTempByteCount in ADI_BOOT_DATA Structure */
-#define ANOMALY_05000393 (_ANOMALY_BF527(< 2))
-/* Log Buffer Not Functional */
-#define ANOMALY_05000394 (_ANOMALY_BF527(< 2))
-/* Hook Routine Not Functional */
-#define ANOMALY_05000395 (_ANOMALY_BF527(< 2))
-/* Header Indirect Bit Not Functional */
-#define ANOMALY_05000396 (_ANOMALY_BF527(< 2))
-/* BK_ONES, BK_ZEROS, and BK_DATECODE Constants Not Functional */
-#define ANOMALY_05000397 (_ANOMALY_BF527(< 2))
-/* SWRESET, DFRESET and WDRESET Bits in the SYSCR Register Not Functional */
-#define ANOMALY_05000398 (_ANOMALY_BF527(< 2))
-/* BCODE_NOBOOT in BCODE Field of SYSCR Register Not Functional */
-#define ANOMALY_05000399 (_ANOMALY_BF527(< 2))
-/* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */
-#define ANOMALY_05000401 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
-#define ANOMALY_05000403 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* Lockbox SESR Disallows Certain User Interrupts */
-#define ANOMALY_05000404 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* Lockbox SESR Firmware Does Not Save/Restore Full Context */
-#define ANOMALY_05000405 (1)
-/* Lockbox SESR Firmware Arguments Are Not Retained After First Initialization */
-#define ANOMALY_05000407 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */
-#define ANOMALY_05000408 (1)
-/* Lockbox firmware leaves MDMA0 channel enabled */
-#define ANOMALY_05000409 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* Incorrect Default Internal Voltage Regulator Setting */
-#define ANOMALY_05000410 (_ANOMALY_BF527(< 2))
-/* bfrom_SysControl() Firmware Function Cannot be Used to Enter Power Saving Modes */
-#define ANOMALY_05000411 (_ANOMALY_BF526(< 1))
-/* OTP_CHECK_FOR_PREV_WRITE Bit is Not Functional in bfrom_OtpWrite() API */
-#define ANOMALY_05000414 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* DEB2_URGENT Bit Not Functional */
-#define ANOMALY_05000415 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* Speculative Fetches Can Cause Undesired External FIFO Operations */
-#define ANOMALY_05000416 (1)
-/* SPORT0 Ignores External TSCLK0 on PG14 When TMR6 is an Output */
-#define ANOMALY_05000417 (_ANOMALY_BF527(< 2))
-/* PPI Timing Requirements tSFSPE and tHFSPE Do Not Meet Data Sheet Specifications */
-#define ANOMALY_05000418 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* USB PLL_STABLE Bit May Not Accurately Reflect the USB PLL's Status */
-#define ANOMALY_05000420 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* TWI Fall Time (Tof) May Violate the Minimum I2C Specification */
-#define ANOMALY_05000421 (1)
-/* TWI Input Capacitance (Ci) May Violate the Maximum I2C Specification */
-#define ANOMALY_05000422 (_ANOMALY_BF526_BF527(> 0, > 1))
-/* Certain Ethernet Frames With Errors are Misclassified in RMII Mode */
-#define ANOMALY_05000423 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* Internal Voltage Regulator Not Trimmed */
-#define ANOMALY_05000424 (_ANOMALY_BF527(< 2))
-/* Multichannel SPORT Channel Misalignment Under Specific Configuration */
-#define ANOMALY_05000425 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
-#define ANOMALY_05000426 (1)
-/* WB_EDGE Bit in NFC_IRQSTAT Incorrectly Reflects Buffer Status Instead of IRQ Status */
-#define ANOMALY_05000429 (_ANOMALY_BF526_BF527(< 1, < 2))
-/* Software System Reset Corrupts PLL_LOCKCNT Register */
-#define ANOMALY_05000430 (_ANOMALY_BF527(> 1))
-/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
-#define ANOMALY_05000431 (1)
-/* bfrom_SysControl() Does Not Clear SIC_IWR1 Before Executing PLL Programming Sequence */
-#define ANOMALY_05000432 (_ANOMALY_BF526(< 1))
-/* SW Breakpoints Ignored Upon Return From Lockbox Authentication */
-#define ANOMALY_05000434 (1)
-/* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */
-#define ANOMALY_05000435 (_ANOMALY_BF526_BF527(< 1, >= 0))
-/* Preboot Cannot be Used to Alter the PLL_DIV Register */
-#define ANOMALY_05000439 (_ANOMALY_BF526_BF527(< 1, >= 0))
-/* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */
-#define ANOMALY_05000440 (_ANOMALY_BF526_BF527(< 1, >= 0))
-/* OTP Write Accesses Not Supported */
-#define ANOMALY_05000442 (_ANOMALY_BF527(< 1))
-/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
-#define ANOMALY_05000443 (1)
-/* The WURESET Bit in the SYSCR Register is not Functional */
-#define ANOMALY_05000445 (_ANOMALY_BF527(>= 0))
-/* USB DMA Short Packet Data Corruption */
-#define ANOMALY_05000450 (1)
-/* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */
-#define ANOMALY_05000451 (_ANOMALY_BF527(>= 0))
-/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
-#define ANOMALY_05000452 (_ANOMALY_BF526_BF527(< 1, >= 0))
-/* USB Receive Interrupt Is Not Generated in DMA Mode 1 */
-#define ANOMALY_05000456 (1)
-/* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */
-#define ANOMALY_05000457 (1)
-/* USB DMA Mode 1 Failure When Multiple USB DMA Channels Are Concurrently Enabled */
-#define ANOMALY_05000460 (1)
-/* False Hardware Error when RETI Points to Invalid Memory */
-#define ANOMALY_05000461 (1)
-/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */
-#define ANOMALY_05000462 (1)
-/* USB Rx DMA Hang */
-#define ANOMALY_05000465 (1)
-/* TxPktRdy Bit Not Set for Transmit Endpoint When Core and DMA Access USB Endpoint FIFOs Simultaneously */
-#define ANOMALY_05000466 (1)
-/* Possible USB RX Data Corruption When Control & Data EP FIFOs are Accessed via the Core */
-#define ANOMALY_05000467 (1)
-/* PLL Latches Incorrect Settings During Reset */
-#define ANOMALY_05000469 (1)
-/* Incorrect Default MSEL Value in PLL_CTL */
-#define ANOMALY_05000472 (_ANOMALY_BF526(>= 0))
-/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */
-#define ANOMALY_05000473 (1)
-/* Possible Lockup Condition when Modifying PLL from External Memory */
-#define ANOMALY_05000475 (1)
-/* TESTSET Instruction Cannot Be Interrupted */
-#define ANOMALY_05000477 (1)
-/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */
-#define ANOMALY_05000481 (1)
-/* Possible USB Data Corruption When Multiple Endpoints Are Accessed by the Core */
-#define ANOMALY_05000483 (1)
-/* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */
-#define ANOMALY_05000485 (_ANOMALY_BF526_BF527(< 2, >= 0))
-/* The CODEC Zero-Cross Detect Feature is not Functional */
-#define ANOMALY_05000487 (1)
-/* SPI Master Boot Can Fail Under Certain Conditions */
-#define ANOMALY_05000490 (1)
-/* Instruction Memory Stalls Can Cause IFLUSH to Fail */
-#define ANOMALY_05000491 (1)
-/* EXCPT Instruction May Be Lost If NMI Happens Simultaneously */
-#define ANOMALY_05000494 (1)
-/* CNT_COMMAND Functionality Depends on CNT_IMASK Configuration */
-#define ANOMALY_05000498 (1)
-/* RXS Bit in SPI_STAT May Become Stuck In RX DMA Modes */
-#define ANOMALY_05000501 (1)
-
-/* Anomalies that don't exist on this proc */
-#define ANOMALY_05000099 (0)
-#define ANOMALY_05000120 (0)
-#define ANOMALY_05000125 (0)
-#define ANOMALY_05000149 (0)
-#define ANOMALY_05000158 (0)
-#define ANOMALY_05000171 (0)
-#define ANOMALY_05000179 (0)
-#define ANOMALY_05000182 (0)
-#define ANOMALY_05000183 (0)
-#define ANOMALY_05000189 (0)
-#define ANOMALY_05000198 (0)
-#define ANOMALY_05000202 (0)
-#define ANOMALY_05000215 (0)
-#define ANOMALY_05000219 (0)
-#define ANOMALY_05000220 (0)
-#define ANOMALY_05000227 (0)
-#define ANOMALY_05000230 (0)
-#define ANOMALY_05000231 (0)
-#define ANOMALY_05000233 (0)
-#define ANOMALY_05000234 (0)
-#define ANOMALY_05000242 (0)
-#define ANOMALY_05000244 (0)
-#define ANOMALY_05000248 (0)
-#define ANOMALY_05000250 (0)
-#define ANOMALY_05000257 (0)
-#define ANOMALY_05000261 (0)
-#define ANOMALY_05000263 (0)
-#define ANOMALY_05000266 (0)
-#define ANOMALY_05000273 (0)
-#define ANOMALY_05000274 (0)
-#define ANOMALY_05000278 (0)
-#define ANOMALY_05000281 (0)
-#define ANOMALY_05000283 (0)
-#define ANOMALY_05000285 (0)
-#define ANOMALY_05000287 (0)
-#define ANOMALY_05000301 (0)
-#define ANOMALY_05000305 (0)
-#define ANOMALY_05000307 (0)
-#define ANOMALY_05000311 (0)
-#define ANOMALY_05000312 (0)
-#define ANOMALY_05000315 (0)
-#define ANOMALY_05000323 (0)
-#define ANOMALY_05000362 (1)
-#define ANOMALY_05000363 (0)
-#define ANOMALY_05000383 (0)
-#define ANOMALY_05000400 (0)
-#define ANOMALY_05000402 (0)
-#define ANOMALY_05000412 (0)
-#define ANOMALY_05000447 (0)
-#define ANOMALY_05000448 (0)
-#define ANOMALY_05000474 (0)
-#define ANOMALY_05000480 (0)
-#define ANOMALY_16000030 (0)
-
-#endif