diff options
Diffstat (limited to 'arch/blackfin/mach-bf518')
| -rw-r--r-- | arch/blackfin/mach-bf518/Kconfig | 61 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf518/include/mach/anomaly.h | 21 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf518/include/mach/bf518.h | 105 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf518/include/mach/defBF514.h | 135 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf518/include/mach/defBF51x_base.h | 144 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf518/include/mach/gpio.h | 83 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf518/include/mach/portmux.h | 7 |
7 files changed, 247 insertions, 309 deletions
diff --git a/arch/blackfin/mach-bf518/Kconfig b/arch/blackfin/mach-bf518/Kconfig index 4ab2d16..1d9f631 100644 --- a/arch/blackfin/mach-bf518/Kconfig +++ b/arch/blackfin/mach-bf518/Kconfig @@ -62,6 +62,67 @@ config BF518_UART1_PORTG PORT G endchoice +comment "Hysteresis/Schmitt Trigger Control" +config BFIN_HYSTERESIS_CONTROL + bool "Enable Hysteresis Control" + help + The ADSP-BF51x allows to control input hysteresis for Port F, + Port G and Port H and other processor signal inputs. + The Schmitt trigger enables can be set only for pin groups. + Saying Y will overwrite the default reset or boot loader + initialization. + +menu "PORT F" + depends on BFIN_HYSTERESIS_CONTROL +config GPIO_HYST_PORTF_0_7 + bool "Enable Hysteresis on PORTF {0...7}" +config GPIO_HYST_PORTF_8_9 + bool "Enable Hysteresis on PORTF {8, 9}" +config GPIO_HYST_PORTF_10 + bool "Enable Hysteresis on PORTF 10" +config GPIO_HYST_PORTF_11 + bool "Enable Hysteresis on PORTF 11" +config GPIO_HYST_PORTF_12_13 + bool "Enable Hysteresis on PORTF {12, 13}" +config GPIO_HYST_PORTF_14_15 + bool "Enable Hysteresis on PORTF {14, 15}" +endmenu + +menu "PORT G" + depends on BFIN_HYSTERESIS_CONTROL +config GPIO_HYST_PORTG_0 + bool "Enable Hysteresis on PORTG 0" +config GPIO_HYST_PORTG_1_4 + bool "Enable Hysteresis on PORTG {1...4}" +config GPIO_HYST_PORTG_5_6 + bool "Enable Hysteresis on PORTG {5, 6}" +config GPIO_HYST_PORTG_7_8 + bool "Enable Hysteresis on PORTG {7, 8}" +config GPIO_HYST_PORTG_9 + bool "Enable Hysteresis on PORTG 9" +config GPIO_HYST_PORTG_10 + bool "Enable Hysteresis on PORTG 10" +config GPIO_HYST_PORTG_11_13 + bool "Enable Hysteresis on PORTG {11...13}" +config GPIO_HYST_PORTG_14_15 + bool "Enable Hysteresis on PORTG {14, 15}" +endmenu + +menu "PORT H" + depends on BFIN_HYSTERESIS_CONTROL +config GPIO_HYST_PORTH_0_7 + bool "Enable Hysteresis on PORTH {0...7}" + +endmenu + +menu "None-GPIO" + depends on BFIN_HYSTERESIS_CONTROL +config NONEGPIO_HYST_NMI_RST_BMODE + bool "Enable Hysteresis on {NMI, RESET, BMODE}" +config NONEGPIO_HYST_JTAG + bool "Enable Hysteresis on JTAG" +endmenu + comment "Interrupt Priority Assignment" menu "Priority" diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h index 2829dd0..24918c5 100644 --- a/arch/blackfin/mach-bf518/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h @@ -5,13 +5,13 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2009 Analog Devices Inc. + * Copyright 2004-2010 Analog Devices Inc. * Licensed under the ADI BSD license. * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: - * - Revision C, 06/12/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List + * - Revision E, 01/26/2010; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List */ /* We plan on not supporting 0.0 silicon, but 0.1 isn't out yet - sorry */ @@ -24,6 +24,8 @@ /* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) +/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ +#define ANOMALY_05000119 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ @@ -52,6 +54,8 @@ #define ANOMALY_05000430 (__SILICON_REVISION__ < 1) /* Incorrect Use of Stack in Lockbox Firmware During Authentication */ #define ANOMALY_05000431 (1) +/* SW Breakpoints Ignored Upon Return From Lockbox Authentication */ +#define ANOMALY_05000434 (1) /* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */ #define ANOMALY_05000435 (__SILICON_REVISION__ < 1) /* PORTx_DRIVE and PORTx_HYSTERESIS Registers Read Back Incorrect Values */ @@ -74,14 +78,21 @@ #define ANOMALY_05000461 (1) /* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ #define ANOMALY_05000462 (1) -/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +/* PLL Latches Incorrect Settings During Reset */ +#define ANOMALY_05000469 (1) +/* Incorrect Default MSEL Value in PLL_CTL */ +#define ANOMALY_05000472 (1) +/* Interrupted SPORT Receive Data Register Read Results In Underflow when SLEN > 15 */ #define ANOMALY_05000473 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) +/* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ +#define ANOMALY_05000481 (1) +/* IFLUSH sucks at life */ +#define ANOMALY_05000491 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) -#define ANOMALY_05000119 (0) #define ANOMALY_05000120 (0) #define ANOMALY_05000125 (0) #define ANOMALY_05000149 (0) @@ -94,6 +105,7 @@ #define ANOMALY_05000198 (0) #define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) +#define ANOMALY_05000219 (0) #define ANOMALY_05000220 (0) #define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) @@ -143,5 +155,6 @@ #define ANOMALY_05000467 (0) #define ANOMALY_05000474 (0) #define ANOMALY_05000475 (0) +#define ANOMALY_05000485 (0) #endif diff --git a/arch/blackfin/mach-bf518/include/mach/bf518.h b/arch/blackfin/mach-bf518/include/mach/bf518.h index 856b330..6906dee 100644 --- a/arch/blackfin/mach-bf518/include/mach/bf518.h +++ b/arch/blackfin/mach-bf518/include/mach/bf518.h @@ -85,6 +85,111 @@ #define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO) +/**************************** Hysteresis Settings ****************************/ + +#ifdef CONFIG_BFIN_HYSTERESIS_CONTROL +#ifdef CONFIG_GPIO_HYST_PORTF_0_7 +#define HYST_PORTF_0_7 (1 << 0) +#else +#define HYST_PORTF_0_7 (0 << 0) +#endif +#ifdef CONFIG_GPIO_HYST_PORTF_8_9 +#define HYST_PORTF_8_9 (1 << 2) +#else +#define HYST_PORTF_8_9 (0 << 2) +#endif +#ifdef CONFIG_GPIO_HYST_PORTF_10 +#define HYST_PORTF_10 (1 << 4) +#else +#define HYST_PORTF_10 (0 << 4) +#endif +#ifdef CONFIG_GPIO_HYST_PORTF_11 +#define HYST_PORTF_11 (1 << 6) +#else +#define HYST_PORTF_11 (0 << 6) +#endif +#ifdef CONFIG_GPIO_HYST_PORTF_12_13 +#define HYST_PORTF_12_13 (1 << 8) +#else +#define HYST_PORTF_12_13 (0 << 8) +#endif +#ifdef CONFIG_GPIO_HYST_PORTF_14_15 +#define HYST_PORTF_14_15 (1 << 10) +#else +#define HYST_PORTF_14_15 (0 << 10) +#endif + +#define HYST_PORTF_0_15 (HYST_PORTF_0_7 | HYST_PORTF_8_9 | HYST_PORTF_10 | \ + HYST_PORTF_11 | HYST_PORTF_12_13 | HYST_PORTF_14_15) + +#ifdef CONFIG_GPIO_HYST_PORTG_0 +#define HYST_PORTG_0 (1 << 0) +#else +#define HYST_PORTG_0 (0 << 0) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_1_4 +#define HYST_PORTG_1_4 (1 << 2) +#else +#define HYST_PORTG_1_4 (0 << 2) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_5_6 +#define HYST_PORTG_5_6 (1 << 4) +#else +#define HYST_PORTG_5_6 (0 << 4) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_7_8 +#define HYST_PORTG_7_8 (1 << 6) +#else +#define HYST_PORTG_7_8 (0 << 6) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_9 +#define HYST_PORTG_9 (1 << 8) +#else +#define HYST_PORTG_9 (0 << 8) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_10 +#define HYST_PORTG_10 (1 << 10) +#else +#define HYST_PORTG_10 (0 << 10) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_11_13 +#define HYST_PORTG_11_13 (1 << 12) +#else +#define HYST_PORTG_11_13 (0 << 12) +#endif +#ifdef CONFIG_GPIO_HYST_PORTG_14_15 +#define HYST_PORTG_14_15 (1 << 14) +#else +#define HYST_PORTG_14_15 (0 << 14) +#endif + +#define HYST_PORTG_0_15 (HYST_PORTG_0 | HYST_PORTG_1_4 | HYST_PORTG_5_6 | \ + HYST_PORTG_7_8 | HYST_PORTG_9 | HYST_PORTG_10 | \ + HYST_PORTG_11_13 | HYST_PORTG_14_15) + +#ifdef CONFIG_GPIO_HYST_PORTH_0_7 +#define HYST_PORTH_0_7 (1 << 0) +#else +#define HYST_PORTH_0_7 (0 << 0) +#endif + +#define HYST_PORTH_0_15 (HYST_PORTH_0_7) + +#ifdef CONFIG_NONEGPIO_HYST_NMI_RST_BMODE +#define HYST_NMI_RST_BMODE (1 << 2) +#else +#define HYST_NMI_RST_BMODE (0 << 2) +#endif +#ifdef CONFIG_NONEGPIO_HYST_JTAG +#define HYST_JTAG (1 << 4) +#else +#define HYST_JTAG (0 << 4) +#endif + +#define HYST_NONEGPIO (HYST_NMI_RST_BMODE | HYST_JTAG) +#define HYST_NONEGPIO_MASK (0x3C) +#endif /* CONFIG_BFIN_HYSTERESIS_CONTROL */ + #ifdef CONFIG_BF518 #define CPU "BF518" #define CPUID 0x27e8 diff --git a/arch/blackfin/mach-bf518/include/mach/defBF514.h b/arch/blackfin/mach-bf518/include/mach/defBF514.h index 92e950d..98a51c4 100644 --- a/arch/blackfin/mach-bf518/include/mach/defBF514.h +++ b/arch/blackfin/mach-bf518/include/mach/defBF514.h @@ -45,139 +45,4 @@ #define RSI_PID6 0xFFC03FF8 /* RSI Peripheral ID Register 6 */ #define RSI_PID7 0xFFC03FFC /* RSI Peripheral ID Register 7 */ -/* ********************************************************** */ -/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ -/* and MULTI BIT READ MACROS */ -/* ********************************************************** */ - -/* Bit masks for SDH_COMMAND */ - -#define CMD_IDX 0x3f /* Command Index */ -#define CMD_RSP 0x40 /* Response */ -#define CMD_L_RSP 0x80 /* Long Response */ -#define CMD_INT_E 0x100 /* Command Interrupt */ -#define CMD_PEND_E 0x200 /* Command Pending */ -#define CMD_E 0x400 /* Command Enable */ - -/* Bit masks for SDH_PWR_CTL */ - -#define PWR_ON 0x3 /* Power On */ -#if 0 -#define TBD 0x3c /* TBD */ -#endif -#define SD_CMD_OD 0x40 /* Open Drain Output */ -#define ROD_CTL 0x80 /* Rod Control */ - -/* Bit masks for SDH_CLK_CTL */ - -#define CLKDIV 0xff /* MC_CLK Divisor */ -#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ -#define PWR_SV_E 0x200 /* Power Save Enable */ -#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ -#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ - -/* Bit masks for SDH_RESP_CMD */ - -#define RESP_CMD 0x3f /* Response Command */ - -/* Bit masks for SDH_DATA_CTL */ - -#define DTX_E 0x1 /* Data Transfer Enable */ -#define DTX_DIR 0x2 /* Data Transfer Direction */ -#define DTX_MODE 0x4 /* Data Transfer Mode */ -#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ -#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ - -/* Bit masks for SDH_STATUS */ - -#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ -#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ -#define CMD_TIME_OUT 0x4 /* CMD Time Out */ -#define DAT_TIME_OUT 0x8 /* Data Time Out */ -#define TX_UNDERRUN 0x10 /* Transmit Underrun */ -#define RX_OVERRUN 0x20 /* Receive Overrun */ -#define CMD_RESP_END 0x40 /* CMD Response End */ -#define CMD_SENT 0x80 /* CMD Sent */ -#define DAT_END 0x100 /* Data End */ -#define START_BIT_ERR 0x200 /* Start Bit Error */ -#define DAT_BLK_END 0x400 /* Data Block End */ -#define CMD_ACT 0x800 /* CMD Active */ -#define TX_ACT 0x1000 /* Transmit Active */ -#define RX_ACT 0x2000 /* Receive Active */ -#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ -#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ -#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ -#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ -#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ -#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ -#define TX_DAT_RDY 0x100000 /* Transmit Data Available */ -#define RX_FIFO_RDY 0x200000 /* Receive Data Available */ - -/* Bit masks for SDH_STATUS_CLR */ - -#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ -#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ -#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ -#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ -#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ -#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ -#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ -#define CMD_SENT_STAT 0x80 /* CMD Sent Status */ -#define DAT_END_STAT 0x100 /* Data End Status */ -#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ -#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ - -/* Bit masks for SDH_MASK0 */ - -#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ -#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ -#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ -#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ -#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ -#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ -#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ -#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ -#define DAT_END_MASK 0x100 /* Data End Mask */ -#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ -#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ -#define CMD_ACT_MASK 0x800 /* CMD Active Mask */ -#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ -#define RX_ACT_MASK 0x2000 /* Receive Active Mask */ -#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ -#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ -#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ -#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ -#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ -#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ -#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ -#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ - -/* Bit masks for SDH_FIFO_CNT */ - -#define FIFO_COUNT 0x7fff /* FIFO Count */ - -/* Bit masks for SDH_E_STATUS */ - -#define SDIO_INT_DET 0x2 /* SDIO Int Detected */ -#define SD_CARD_DET 0x10 /* SD Card Detect */ - -/* Bit masks for SDH_E_MASK */ - -#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ -#define SCD_MSK 0x40 /* Mask Card Detect */ - -/* Bit masks for SDH_CFG */ - -#define CLKS_EN 0x1 /* Clocks Enable */ -#define SD4E 0x4 /* SDIO 4-Bit Enable */ -#define MWE 0x8 /* Moving Window Enable */ -#define SD_RST 0x10 /* SDMMC Reset */ -#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ -#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ -#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ - -/* Bit masks for SDH_RD_WAIT_EN */ - -#define RWR 0x1 /* Read Wait Request */ - #endif /* _DEF_BF514_H */ diff --git a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h index 9241205..2bc8f4f 100644 --- a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h +++ b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h @@ -458,22 +458,22 @@ /* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ #define TWI0_REGBASE 0xFFC01400 -#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ -#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */ -#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ -#define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ -#define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ -#define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ -#define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ -#define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ -#define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ -#define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ -#define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ -#define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ -#define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ -#define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ -#define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ -#define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ +#define TWI0_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ +#define TWI0_CONTROL 0xFFC01404 /* TWI Control Register */ +#define TWI0_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ +#define TWI0_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ +#define TWI0_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ +#define TWI0_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ +#define TWI0_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ +#define TWI0_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ +#define TWI0_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ +#define TWI0_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ +#define TWI0_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ +#define TWI0_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ +#define TWI0_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ +#define TWI0_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ +#define TWI0_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ +#define TWI0_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ /* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ @@ -1319,7 +1319,7 @@ #define TWI_ENA 0x0080 /* TWI Enable */ #define SCCB 0x0200 /* SCCB Compatibility Enable */ -/* TWI_SLAVE_CTRL Masks */ +/* TWI_SLAVE_CTL Masks */ #define SEN 0x0001 /* Slave Enable */ #define SADD_LEN 0x0002 /* Slave Address Length */ #define STDVAL 0x0004 /* Slave Transmit Data Valid */ @@ -1330,7 +1330,7 @@ #define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ #define GCALL 0x0002 /* General Call Indicator */ -/* TWI_MASTER_CTRL Masks */ +/* TWI_MASTER_CTL Masks */ #define MEN 0x0001 /* Master Mode Enable */ #define MADD_LEN 0x0002 /* Master Address Length */ #define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ @@ -1576,114 +1576,6 @@ #define HOST_COUNT_TIMEOUT 0x7ff /* Host Timeout count */ -/* Bit masks for CNT_CONFIG */ - -#define CNTE 0x1 /* Counter Enable */ -#define nCNTE 0x0 -#define DEBE 0x2 /* Debounce Enable */ -#define nDEBE 0x0 -#define CDGINV 0x10 /* CDG Pin Polarity Invert */ -#define nCDGINV 0x0 -#define CUDINV 0x20 /* CUD Pin Polarity Invert */ -#define nCUDINV 0x0 -#define CZMINV 0x40 /* CZM Pin Polarity Invert */ -#define nCZMINV 0x0 -#define CNTMODE 0x700 /* Counter Operating Mode */ -#define ZMZC 0x800 /* CZM Zeroes Counter Enable */ -#define nZMZC 0x0 -#define BNDMODE 0x3000 /* Boundary register Mode */ -#define INPDIS 0x8000 /* CUG and CDG Input Disable */ -#define nINPDIS 0x0 - -/* Bit masks for CNT_IMASK */ - -#define ICIE 0x1 /* Illegal Gray/Binary Code Interrupt Enable */ -#define nICIE 0x0 -#define UCIE 0x2 /* Up count Interrupt Enable */ -#define nUCIE 0x0 -#define DCIE 0x4 /* Down count Interrupt Enable */ -#define nDCIE 0x0 -#define MINCIE 0x8 /* Min Count Interrupt Enable */ -#define nMINCIE 0x0 -#define MAXCIE 0x10 /* Max Count Interrupt Enable */ -#define nMAXCIE 0x0 -#define COV31IE 0x20 /* Bit 31 Overflow Interrupt Enable */ -#define nCOV31IE 0x0 -#define COV15IE 0x40 /* Bit 15 Overflow Interrupt Enable */ -#define nCOV15IE 0x0 -#define CZEROIE 0x80 /* Count to Zero Interrupt Enable */ -#define nCZEROIE 0x0 -#define CZMIE 0x100 /* CZM Pin Interrupt Enable */ -#define nCZMIE 0x0 -#define CZMEIE 0x200 /* CZM Error Interrupt Enable */ -#define nCZMEIE 0x0 -#define CZMZIE 0x400 /* CZM Zeroes Counter Interrupt Enable */ -#define nCZMZIE 0x0 - -/* Bit masks for CNT_STATUS */ - -#define ICII 0x1 /* Illegal Gray/Binary Code Interrupt Identifier */ -#define nICII 0x0 -#define UCII 0x2 /* Up count Interrupt Identifier */ -#define nUCII 0x0 -#define DCII 0x4 /* Down count Interrupt Identifier */ -#define nDCII 0x0 -#define MINCII 0x8 /* Min Count Interrupt Identifier */ -#define nMINCII 0x0 -#define MAXCII 0x10 /* Max Count Interrupt Identifier */ -#define nMAXCII 0x0 -#define COV31II 0x20 /* Bit 31 Overflow Interrupt Identifier */ -#define nCOV31II 0x0 -#define COV15II 0x40 /* Bit 15 Overflow Interrupt Identifier */ -#define nCOV15II 0x0 -#define CZEROII 0x80 /* Count to Zero Interrupt Identifier */ -#define nCZEROII 0x0 -#define CZMII 0x100 /* CZM Pin Interrupt Identifier */ -#define nCZMII 0x0 -#define CZMEII 0x200 /* CZM Error Interrupt Identifier */ -#define nCZMEII 0x0 -#define CZMZII 0x400 /* CZM Zeroes Counter Interrupt Identifier */ -#define nCZMZII 0x0 - -/* Bit masks for CNT_COMMAND */ - -#define W1LCNT 0xf /* Load Counter Register */ -#define W1LMIN 0xf0 /* Load Min Register */ -#define W1LMAX 0xf00 /* Load Max Register */ -#define W1ZMONCE 0x1000 /* Enable CZM Clear Counter Once */ -#define nW1ZMONCE 0x0 - -/* Bit masks for CNT_DEBOUNCE */ - -#define DPRESCALE 0xf /* Load Counter Register */ - -/* CNT_COMMAND bit field options */ - -#define W1LCNT_ZERO 0x0001 /* write 1 to load CNT_COUNTER with zero */ -#define W1LCNT_MIN 0x0004 /* write 1 to load CNT_COUNTER from CNT_MIN */ -#define W1LCNT_MAX 0x0008 /* write 1 to load CNT_COUNTER from CNT_MAX */ - -#define W1LMIN_ZERO 0x0010 /* write 1 to load CNT_MIN with zero */ -#define W1LMIN_CNT 0x0020 /* write 1 to load CNT_MIN from CNT_COUNTER */ -#define W1LMIN_MAX 0x0080 /* write 1 to load CNT_MIN from CNT_MAX */ - -#define W1LMAX_ZERO 0x0100 /* write 1 to load CNT_MAX with zero */ -#define W1LMAX_CNT 0x0200 /* write 1 to load CNT_MAX from CNT_COUNTER */ -#define W1LMAX_MIN 0x0400 /* write 1 to load CNT_MAX from CNT_MIN */ - -/* CNT_CONFIG bit field options */ - -#define CNTMODE_QUADENC 0x0000 /* quadrature encoder mode */ -#define CNTMODE_BINENC 0x0100 /* binary encoder mode */ -#define CNTMODE_UDCNT 0x0200 /* up/down counter mode */ -#define CNTMODE_DIRCNT 0x0400 /* direction counter mode */ -#define CNTMODE_DIRTMR 0x0500 /* direction timer mode */ - -#define BNDMODE_COMP 0x0000 /* boundary compare mode */ -#define BNDMODE_ZERO 0x1000 /* boundary compare and zero mode */ -#define BNDMODE_CAPT 0x2000 /* boundary capture mode */ -#define BNDMODE_AEXT 0x3000 /* boundary auto-extend mode */ - /* Bit masks for SECURE_SYSSWT */ #define EMUDABL 0x1 /* Emulation Disable. */ diff --git a/arch/blackfin/mach-bf518/include/mach/gpio.h b/arch/blackfin/mach-bf518/include/mach/gpio.h index bbab2d7..9af6ce0 100644 --- a/arch/blackfin/mach-bf518/include/mach/gpio.h +++ b/arch/blackfin/mach-bf518/include/mach/gpio.h @@ -7,48 +7,49 @@ #ifndef _MACH_GPIO_H_ #define _MACH_GPIO_H_ -#define MAX_BLACKFIN_GPIOS 40 +#define MAX_BLACKFIN_GPIOS 41 -#define GPIO_PF0 0 -#define GPIO_PF1 1 -#define GPIO_PF2 2 -#define GPIO_PF3 3 -#define GPIO_PF4 4 -#define GPIO_PF5 5 -#define GPIO_PF6 6 -#define GPIO_PF7 7 -#define GPIO_PF8 8 -#define GPIO_PF9 9 -#define GPIO_PF10 10 -#define GPIO_PF11 11 -#define GPIO_PF12 12 -#define GPIO_PF13 13 -#define GPIO_PF14 14 -#define GPIO_PF15 15 -#define GPIO_PG0 16 -#define GPIO_PG1 17 -#define GPIO_PG2 18 -#define GPIO_PG3 19 -#define GPIO_PG4 20 -#define GPIO_PG5 21 -#define GPIO_PG6 22 -#define GPIO_PG7 23 -#define GPIO_PG8 24 -#define GPIO_PG9 25 -#define GPIO_PG10 26 -#define GPIO_PG11 27 -#define GPIO_PG12 28 -#define GPIO_PG13 29 -#define GPIO_PG14 30 -#define GPIO_PG15 31 -#define GPIO_PH0 32 -#define GPIO_PH1 33 -#define GPIO_PH2 34 -#define GPIO_PH3 35 -#define GPIO_PH4 36 -#define GPIO_PH5 37 -#define GPIO_PH6 38 -#define GPIO_PH7 39 +#define GPIO_PF0 0 +#define GPIO_PF1 1 +#define GPIO_PF2 2 +#define GPIO_PF3 3 +#define GPIO_PF4 4 +#define GPIO_PF5 5 +#define GPIO_PF6 6 +#define GPIO_PF7 7 +#define GPIO_PF8 8 +#define GPIO_PF9 9 +#define GPIO_PF10 10 +#define GPIO_PF11 11 +#define GPIO_PF12 12 +#define GPIO_PF13 13 +#define GPIO_PF14 14 +#define GPIO_PF15 15 +#define GPIO_PG0 16 +#define GPIO_PG1 17 +#define GPIO_PG2 18 +#define GPIO_PG3 19 +#define GPIO_PG4 20 +#define GPIO_PG5 21 +#define GPIO_PG6 22 +#define GPIO_PG7 23 +#define GPIO_PG8 24 +#define GPIO_PG9 25 +#define GPIO_PG10 26 +#define GPIO_PG11 27 +#define GPIO_PG12 28 +#define GPIO_PG13 29 +#define GPIO_PG14 30 +#define GPIO_PG15 31 +#define GPIO_PH0 32 +#define GPIO_PH1 33 +#define GPIO_PH2 34 +#define GPIO_PH3 35 +#define GPIO_PH4 36 +#define GPIO_PH5 37 +#define GPIO_PH6 38 +#define GPIO_PH7 39 +#define GPIO_PH8 40 #define PORT_F GPIO_PF0 #define PORT_G GPIO_PG0 diff --git a/arch/blackfin/mach-bf518/include/mach/portmux.h b/arch/blackfin/mach-bf518/include/mach/portmux.h index e352910..cd84a56 100644 --- a/arch/blackfin/mach-bf518/include/mach/portmux.h +++ b/arch/blackfin/mach-bf518/include/mach/portmux.h @@ -7,7 +7,7 @@ #ifndef _MACH_PORTMUX_H_ #define _MACH_PORTMUX_H_ -#define MAX_RESOURCES MAX_BLACKFIN_GPIOS +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS /* EMAC MII/RMII Port Mux */ #define P_MII0_ETxD2 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0)) @@ -95,7 +95,7 @@ #define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0)) #define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0)) #define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(2)) -#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(2)) +#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(2)) #define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(2)) #define P_SPI1_SS (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1)) @@ -109,6 +109,7 @@ #define P_SPI1_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(2)) #define P_SPI1_SSEL5 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2)) +#define GPIO_DEFAULT_BOOT_SPI_CS GPIO_PG15 #define P_DEFAULT_BOOT_SPI_CS P_SPI0_SSEL2 /* SPORT Port Mux */ @@ -195,6 +196,6 @@ #define P_AMS2 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1)) #define P_AMS3 (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(2)) -#define P_HWAIT (P_DEFINED | P_IDENT(GPIO_PG000000000) | P_FUNCT(1)) +#define P_HWAIT (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(1)) #endif /* _MACH_PORTMUX_H_ */ |
