diff options
Diffstat (limited to 'arch/blackfin/Kconfig')
| -rw-r--r-- | arch/blackfin/Kconfig | 175 |
1 files changed, 113 insertions, 62 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 5c1e215..9ce675e 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -323,7 +323,7 @@ config CMDLINE to the kernel, you may specify one here. As a minimum, you should specify the memory size and the root device (e.g., mem=8M, root=/dev/nfs). -comment "Board Setup" +comment "Clock/PLL Setup" config CLKIN_HZ int "Crystal Frequency in Hz" @@ -335,6 +335,118 @@ config CLKIN_HZ help The frequency of CLKIN crystal oscillator on the board in Hz. +config BFIN_KERNEL_CLOCK + bool "Re-program Clocks while Kernel boots?" + default n + help + This option decides if kernel clocks are re-programed from the + bootloader settings. If the clocks are not set, the SDRAM settings + are also not changed, and the Bootloader does 100% of the hardware + configuration. + +config PLL_BYPASS + bool "Bypass PLL" + depends on BFIN_KERNEL_CLOCK + default n + +config CLKIN_HALF + bool "Half Clock In" + depends on BFIN_KERNEL_CLOCK && (! PLL_BYPASS) + default n + help + If this is set the clock will be divided by 2, before it goes to the PLL. + +config VCO_MULT + int "VCO Multiplier" + depends on BFIN_KERNEL_CLOCK && (! PLL_BYPASS) + range 1 64 + default "22" if BFIN533_EZKIT + default "45" if BFIN533_STAMP + default "20" if BFIN537_STAMP + default "22" if BFIN533_BLUETECHNIX_CM + default "20" if BFIN537_BLUETECHNIX_CM + default "20" if BFIN561_BLUETECHNIX_CM + default "20" if BFIN561_EZKIT + help + This controls the frequency of the on-chip PLL. This can be between 1 and 64. + PLL Frequency = (Crystal Frequency) * (this setting) + +choice + prompt "Core Clock Divider" + depends on BFIN_KERNEL_CLOCK + default CCLK_DIV_1 + help + This sets the frequency of the core. It can be 1, 2, 4 or 8 + Core Frequency = (PLL frequency) / (this setting) + +config CCLK_DIV_1 + bool "1" + +config CCLK_DIV_2 + bool "2" + +config CCLK_DIV_4 + bool "4" + +config CCLK_DIV_8 + bool "8" +endchoice + +config SCLK_DIV + int "System Clock Divider" + depends on BFIN_KERNEL_CLOCK + range 1 15 + default 5 if BFIN533_EZKIT + default 5 if BFIN533_STAMP + default 4 if BFIN537_STAMP + default 5 if BFIN533_BLUETECHNIX_CM + default 4 if BFIN537_BLUETECHNIX_CM + default 4 if BFIN561_BLUETECHNIX_CM + default 5 if BFIN561_EZKIT + help + This sets the frequency of the system clock (including SDRAM or DDR). + This can be between 1 and 15 + System Clock = (PLL frequency) / (this setting) + +# +# Max & Min Speeds for various Chips +# +config MAX_VCO_HZ + int + default 600000000 if BF522 + default 600000000 if BF525 + default 600000000 if BF527 + default 400000000 if BF531 + default 400000000 if BF532 + default 750000000 if BF533 + default 500000000 if BF534 + default 400000000 if BF536 + default 600000000 if BF537 + default 533000000 if BF538 + default 533000000 if BF539 + default 600000000 if BF542 + default 533000000 if BF544 + default 533000000 if BF549 + default 600000000 if BF561 + +config MIN_VCO_HZ + int + default 50000000 + +config MAX_SCLK_HZ + int + default 133000000 + +config MIN_SCLK_HZ + int + default 27000000 + +comment "Kernel Timer/Scheduler" + +source kernel/Kconfig.hz + +comment "Memory Setup" + config MEM_SIZE int "SDRAM Memory Size in MBytes" default 32 if BFIN533_EZKIT @@ -448,10 +560,6 @@ endmenu menu "Blackfin Kernel Optimizations" -comment "Timer Tick" - -source kernel/Kconfig.hz - comment "Memory Optimizations" config I_ENTRY_L1 @@ -672,63 +780,6 @@ config L1_MAX_PIECE Set the max memory pieces for the L1 SRAM allocation algorithm. Min value is 16. Max value is 1024. -menu "Clock Settings" - - -config BFIN_KERNEL_CLOCK - bool "Re-program Clocks while Kernel boots?" - default n - help - This option decides if kernel clocks are re-programed from the - bootloader settings. If the clocks are not set, the SDRAM settings - are also not changed, and the Bootloader does 100% of the hardware - configuration. - -config VCO_MULT - int "VCO Multiplier" - depends on BFIN_KERNEL_CLOCK - default "22" if BFIN533_EZKIT - default "45" if BFIN533_STAMP - default "20" if BFIN537_STAMP - default "22" if BFIN533_BLUETECHNIX_CM - default "20" if BFIN537_BLUETECHNIX_CM - default "20" if BFIN561_BLUETECHNIX_CM - default "20" if BFIN561_EZKIT - -config CCLK_DIV - int "Core Clock Divider" - depends on BFIN_KERNEL_CLOCK - default 1 if BFIN533_EZKIT - default 1 if BFIN533_STAMP - default 1 if BFIN537_STAMP - default 1 if BFIN533_BLUETECHNIX_CM - default 1 if BFIN537_BLUETECHNIX_CM - default 1 if BFIN561_BLUETECHNIX_CM - default 1 if BFIN561_EZKIT - -config SCLK_DIV - int "System Clock Divider" - depends on BFIN_KERNEL_CLOCK - default 5 if BFIN533_EZKIT - default 5 if BFIN533_STAMP - default 4 if BFIN537_STAMP - default 5 if BFIN533_BLUETECHNIX_CM - default 4 if BFIN537_BLUETECHNIX_CM - default 4 if BFIN561_BLUETECHNIX_CM - default 5 if BFIN561_EZKIT - -config CLKIN_HALF - bool "Half ClockIn" - depends on BFIN_KERNEL_CLOCK - default n - -config PLL_BYPASS - bool "Bypass PLL" - depends on BFIN_KERNEL_CLOCK - default n - -endmenu - comment "Asynchonous Memory Configuration" menu "EBIU_AMBCTL Global Control" |
