1 files changed, 0 insertions, 98 deletions
diff --git a/arch/avr32/boards/atstk1000/flash.c b/arch/avr32/boards/atstk1000/flash.c
deleted file mode 100644
index 6e4d561..0000000
--- a/arch/avr32/boards/atstk1000/flash.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * ATSTK1000 board-specific flash initialization
- *
- * Copyright (C) 2005-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <mach/smc.h>
-
-static struct smc_timing flash_timing __initdata = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 40,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 10,
-
-	.ncs_read_pulse		= 80,
-	.nrd_pulse		= 40,
-	.ncs_write_pulse	= 65,
-	.nwe_pulse		= 55,
-
-	.read_cycle		= 120,
-	.write_cycle		= 120,
-};
-
-static struct smc_config flash_config __initdata = {
-	.bus_width		= 2,
-	.nrd_controlled		= 1,
-	.nwe_controlled		= 1,
-	.byte_write		= 1,
-};
-
-static struct mtd_partition flash_parts[] = {
-	{
-		.name           = "u-boot",
-		.offset         = 0x00000000,
-		.size           = 0x00020000,           /* 128 KiB */
-		.mask_flags     = MTD_WRITEABLE,
-	},
-	{
-		.name           = "root",
-		.offset         = 0x00020000,
-		.size           = 0x007d0000,
-	},
-	{
-		.name           = "env",
-		.offset         = 0x007f0000,
-		.size           = 0x00010000,
-		.mask_flags     = MTD_WRITEABLE,
-	},
-};
-
-static struct physmap_flash_data flash_data = {
-	.width		= 2,
-	.nr_parts	= ARRAY_SIZE(flash_parts),
-	.parts		= flash_parts,
-};
-
-static struct resource flash_resource = {
-	.start		= 0x00000000,
-	.end		= 0x007fffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.resource	= &flash_resource,
-	.num_resources	= 1,
-	.dev		= {
-		.platform_data = &flash_data,
-	},
-};
-
-/* This needs to be called after the SMC has been initialized */
-static int __init atstk1000_flash_init(void)
-{
-	int ret;
-
-	smc_set_timing(&flash_config, &flash_timing);
-	ret = smc_set_configuration(0, &flash_config);
-	if (ret < 0) {
-		printk(KERN_ERR "atstk1000: failed to set NOR flash timing\n");
-		return ret;
-	}
-
-	platform_device_register(&flash_device);
-
-	return 0;
-}
-device_initcall(atstk1000_flash_init);