diff options
Diffstat (limited to 'arch/avr32/boards/atstk1000/atstk1003.c')
| -rw-r--r-- | arch/avr32/boards/atstk1000/atstk1003.c | 162 |
1 files changed, 0 insertions, 162 deletions
diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c deleted file mode 100644 index ff7e232..0000000 --- a/arch/avr32/boards/atstk1000/atstk1003.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * ATSTK1003 daughterboard-specific init code - * - * Copyright (C) 2007 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/string.h> -#include <linux/types.h> - -#include <linux/spi/at73c213.h> -#include <linux/spi/spi.h> -#include <linux/atmel-mci.h> - -#include <asm/setup.h> - -#include <mach/at32ap700x.h> -#include <mach/board.h> -#include <mach/init.h> -#include <mach/portmux.h> - -#include "atstk1000.h" - -/* Oscillator frequencies. These are board specific */ -unsigned long at32_board_osc_rates[3] = { - [0] = 32768, /* 32.768 kHz on RTC osc */ - [1] = 20000000, /* 20 MHz on osc0 */ - [2] = 12000000, /* 12 MHz on osc1 */ -}; - -#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC -static struct at73c213_board_info at73c213_data = { - .ssc_id = 0, - .shortname = "AVR32 STK1000 external DAC", -}; -#endif - -#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM -static struct spi_board_info spi0_board_info[] __initdata = { -#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC - { - /* AT73C213 */ - .modalias = "at73c213", - .max_speed_hz = 200000, - .chip_select = 0, - .mode = SPI_MODE_1, - .platform_data = &at73c213_data, - }, -#endif - /* - * We can control the LTV350QV LCD panel, but it isn't much - * point since we don't have an LCD controller... - */ -}; -#endif - -#ifdef CONFIG_BOARD_ATSTK100X_SPI1 -static struct spi_board_info spi1_board_info[] __initdata = { { - /* patch in custom entries here */ -} }; -#endif - -#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM -static struct mci_platform_data __initdata mci0_data = { - .slot[0] = { - .bus_width = 4, - .detect_pin = -ENODEV, - .wp_pin = -ENODEV, - }, -}; -#endif - -#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC -static void __init atstk1003_setup_extdac(void) -{ - struct clk *gclk; - struct clk *pll; - - gclk = clk_get(NULL, "gclk0"); - if (IS_ERR(gclk)) - goto err_gclk; - pll = clk_get(NULL, "pll0"); - if (IS_ERR(pll)) - goto err_pll; - - if (clk_set_parent(gclk, pll)) { - pr_debug("STK1000: failed to set pll0 as parent for DAC clock\n"); - goto err_set_clk; - } - - at32_select_periph(GPIO_PIOA_BASE, (1 << 30), GPIO_PERIPH_A, 0); - at73c213_data.dac_clk = gclk; - -err_set_clk: - clk_put(pll); -err_pll: - clk_put(gclk); -err_gclk: - return; -} -#else -static void __init atstk1003_setup_extdac(void) -{ - -} -#endif /* CONFIG_BOARD_ATSTK1000_EXTDAC */ - -void __init setup_board(void) -{ -#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM - at32_map_usart(0, 1, 0); /* USART 0/B: /dev/ttyS1, IRDA */ -#else - at32_map_usart(1, 0, 0); /* USART 1/A: /dev/ttyS0, DB9 */ -#endif - /* USART 2/unused: expansion connector */ - at32_map_usart(3, 2, 0); /* USART 3/C: /dev/ttyS2, DB9 */ - - at32_setup_serial_console(0); -} - -static int __init atstk1003_init(void) -{ - /* - * ATSTK1000 uses 32-bit SDRAM interface. Reserve the - * SDRAM-specific pins so that nobody messes with them. - */ - at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL); - -#ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM - at32_add_device_usart(1); -#else - at32_add_device_usart(0); -#endif - at32_add_device_usart(2); - -#ifndef CONFIG_BOARD_ATSTK100X_SW1_CUSTOM - at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); -#endif -#ifdef CONFIG_BOARD_ATSTK100X_SPI1 - at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); -#endif -#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM - at32_add_device_mci(0, &mci0_data); -#endif - at32_add_device_usba(0, NULL); -#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM - at32_add_device_ssc(0, ATMEL_SSC_TX); -#endif - - atstk1000_setup_j2_leds(); - atstk1003_setup_extdac(); - - return 0; -} -postcore_initcall(atstk1003_init); |
