1 files changed, 34 insertions, 16 deletions

diff --git a/arch/avr32/boards/atngw100/evklcd10x.c b/arch/avr32/boards/atngw100/evklcd10x.c
index 8140b22..0033711 100644
--- a/arch/avr32/boards/atngw100/evklcd10x.c
+++ b/arch/avr32/boards/atngw100/evklcd10x.c
@@ -11,6 +11,7 @@
 
 #include <linux/init.h>
 #include <linux/linkage.h>
+#include <linux/gpio.h>
 #include <linux/fb.h>
 #include <linux/platform_device.h>
 
@@ -19,26 +20,26 @@
 #include <asm/setup.h>
 
 #include <mach/at32ap700x.h>
+#include <mach/portmux.h>
 #include <mach/board.h>
 
+#include <sound/atmel-ac97c.h>
+
 static struct ac97c_platform_data __initdata ac97c0_data = {
-	.dma_rx_periph_id	= 3,
-	.dma_tx_periph_id	= 4,
-	.dma_controller_id	= 0,
-	.reset_pin		= GPIO_PIN_PB(19),
+	.reset_pin = GPIO_PIN_PB(19),
 };
 
 #ifdef CONFIG_BOARD_ATNGW100_EVKLCD10X_VGA
 static struct fb_videomode __initdata tcg057vglad_modes[] = {
 	{
-		.name		= "640x480 @ 60",
-		.refresh	= 60,
+		.name		= "640x480 @ 50",
+		.refresh	= 50,
 		.xres		= 640,		.yres		= 480,
 		.pixclock	= KHZ2PICOS(25180),
 
-		.left_margin	= 64,		.right_margin	= 31,
-		.upper_margin	= 34,		.lower_margin	= 2,
-		.hsync_len	= 96,		.vsync_len	= 4,
+		.left_margin	= 64,		.right_margin	= 96,
+		.upper_margin	= 34,		.lower_margin	= 11,
+		.hsync_len	= 64,		.vsync_len	= 15,
 
 		.sync		= 0,
 		.vmode		= FB_VMODE_NONINTERLACED,
@@ -69,14 +70,14 @@ static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
 #elif CONFIG_BOARD_ATNGW100_EVKLCD10X_QVGA
 static struct fb_videomode __initdata tcg057qvlad_modes[] = {
 	{
-		.name		= "320x240 @ 60",
-		.refresh	= 60,
+		.name		= "320x240 @ 50",
+		.refresh	= 50,
 		.xres		= 320,		.yres		= 240,
 		.pixclock	= KHZ2PICOS(6300),
 
-		.left_margin	= 52,		.right_margin	= 28,
-		.upper_margin	= 7,		.lower_margin	= 2,
-		.hsync_len	= 96,		.vsync_len	= 4,
+		.left_margin	= 34,		.right_margin	= 46,
+		.upper_margin	= 7,		.lower_margin	= 15,
+		.hsync_len	= 64,		.vsync_len	= 12,
 
 		.sync		= 0,
 		.vmode		= FB_VMODE_NONINTERLACED,
@@ -144,12 +145,29 @@ static struct atmel_lcdfb_info __initdata atevklcd10x_lcdc_data = {
 };
 #endif
 
+static void atevklcd10x_lcdc_power_control(int on)
+{
+	gpio_set_value(GPIO_PIN_PB(15), on);
+}
+
 static int __init atevklcd10x_init(void)
 {
-	at32_add_device_ac97c(0, &ac97c0_data);
+	/* PB15 is connected to the enable line on the boost regulator
+	 * controlling the backlight for the LCD panel.
+	 */
+	at32_select_gpio(GPIO_PIN_PB(15), AT32_GPIOF_OUTPUT);
+	gpio_request(GPIO_PIN_PB(15), "backlight");
+	gpio_direction_output(GPIO_PIN_PB(15), 0);
+
+	atevklcd10x_lcdc_data.atmel_lcdfb_power_control =
+		atevklcd10x_lcdc_power_control;
 
 	at32_add_device_lcdc(0, &atevklcd10x_lcdc_data,
-			fbmem_start, fbmem_size, 1);
+			fbmem_start, fbmem_size,
+			ATMEL_LCDC_ALT_18BIT | ATMEL_LCDC_PE_DVAL);
+
+	at32_add_device_ac97c(0, &ac97c0_data, AC97C_BOTH);
+
 	return 0;
 }
 postcore_initcall(atevklcd10x_init);