diff options
Diffstat (limited to 'arch/arm')
89 files changed, 586 insertions, 215 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 6d6e18f..2f88d8d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -6,7 +6,7 @@ config ARM select HAVE_DMA_API_DEBUG select HAVE_IDE if PCI || ISA || PCMCIA select HAVE_DMA_ATTRS - select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7) + select HAVE_DMA_CONTIGUOUS if MMU select HAVE_MEMBLOCK select RTC_LIB select SYS_SUPPORTS_APM_EMULATION @@ -2144,6 +2144,7 @@ source "drivers/cpufreq/Kconfig" config CPU_FREQ_IMX tristate "CPUfreq driver for i.MX CPUs" depends on ARCH_MXC && CPU_FREQ + select CPU_FREQ_TABLE help This enables the CPUfreq driver for i.MX CPUs. diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index f15f82b..e968a52 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -356,15 +356,15 @@ choice is nothing connected to read from the DCC. config DEBUG_SEMIHOSTING - bool "Kernel low-level debug output via semihosting I" + bool "Kernel low-level debug output via semihosting I/O" help Semihosting enables code running on an ARM target to use the I/O facilities on a host debugger/emulator through a - simple SVC calls. The host debugger or emulator must have + simple SVC call. The host debugger or emulator must have semihosting enabled for the special svc call to be trapped otherwise the kernel will crash. - This is known to work with OpenOCD, as wellas + This is known to work with OpenOCD, as well as ARM's Fast Models, or any other controlling environment that implements semihosting. diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 30eae87..a051dfb 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -284,10 +284,10 @@ zImage Image xipImage bootpImage uImage: vmlinux zinstall uinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ -%.dtb: +%.dtb: scripts $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ -dtbs: +dtbs: scripts $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ # We use MRPROPER_FILES and CLEAN_FILES now diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index b8c64b8..81769c1 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -659,10 +659,14 @@ __armv7_mmu_cache_on: #ifdef CONFIG_CPU_ENDIAN_BE8 orr r0, r0, #1 << 25 @ big-endian page tables #endif + mrcne p15, 0, r6, c2, c0, 2 @ read ttb control reg orrne r0, r0, #1 @ MMU enabled movne r1, #0xfffffffd @ domain 0 = client + bic r6, r6, #1 << 31 @ 32-bit translation system + bic r6, r6, #3 << 0 @ use only ttbr0 mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer mcrne p15, 0, r1, c3, c0, 0 @ load domain access control + mcrne p15, 0, r6, c2, c0, 2 @ load ttb control #endif mcr p15, 0, r0, c7, c5, 4 @ ISB mcr p15, 0, r0, c1, c0, 0 @ load control register diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 59509c4..bd0cff3 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -154,5 +154,10 @@ #size-cells = <0>; ti,hwmods = "i2c3"; }; + + wdt2: wdt@44e35000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; + }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index 7829a4d..96514c1 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -15,7 +15,7 @@ compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; chosen { - bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; + bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; }; ahb { diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index cd86177..59d9789 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -25,8 +25,8 @@ aips@70000000 { /* aips-1 */ spba@70000000 { esdhc@70004000 { /* ESDHC1 */ - fsl,cd-internal; - fsl,wp-internal; + fsl,cd-controller; + fsl,wp-controller; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 52d9470..f8ca6fa 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -41,9 +41,13 @@ }; power-blue { label = "power:blue"; - gpios = <&gpio1 11 0>; + gpios = <&gpio1 10 0>; linux,default-trigger = "timer"; }; + power-red { + label = "power:red"; + gpios = <&gpio1 11 0>; + }; usb1 { label = "usb1:blue"; gpios = <&gpio1 12 0>; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 3b2f351..d351b27 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -66,6 +66,7 @@ vcxio: regulator@8 { compatible = "ti,twl6030-vcxio"; + regulator-always-on; }; vusb: regulator@9 { @@ -74,10 +75,12 @@ v1v8: regulator@10 { compatible = "ti,twl6030-v1v8"; + regulator-always-on; }; v2v1: regulator@11 { compatible = "ti,twl6030-v2v1"; + regulator-always-on; }; clk32kg: regulator@12 { diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig index 7d87184..90610c7 100644 --- a/arch/arm/configs/armadillo800eva_defconfig +++ b/arch/arm/configs/armadillo800eva_defconfig @@ -33,7 +33,7 @@ CONFIG_AEABI=y CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096" +CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw" CONFIG_CMDLINE_FORCE=y CONFIG_KEXEC=y CONFIG_VFP=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 2d4f661..da68454 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -86,6 +86,7 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_LM3530=y CONFIG_LEDS_LP5521=y +CONFIG_LEDS_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AB8500=y CONFIG_RTC_DRV_PL031=y diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 03fb936..5c8b3bf4 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -320,4 +320,12 @@ .size \name , . - \name .endm + .macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req +#ifndef CONFIG_CPU_USE_DOMAINS + adds \tmp, \addr, #\size - 1 + sbcccs \tmp, \tmp, \limit + bcs \bad +#endif + .endm + #endif /* __ASM_ASSEMBLER_H__ */ diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 2ae842d..5c44dcb 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -203,6 +203,13 @@ static inline void dma_free_writecombine(struct device *dev, size_t size, } /* + * This can be called during early boot to increase the size of the atomic + * coherent DMA pool above the default value of 256KiB. It must be called + * before postcore_initcall. + */ +extern void __init init_dma_coherent_pool_size(unsigned long size); + +/* * This can be called during boot to increase the size of the consistent * DMA region above it's default value of 2MB. It must be called before the * memory allocator is initialised, i.e. before any core_initcall. diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index e965f1b..5f6ddcc 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -187,6 +187,7 @@ static inline unsigned long __phys_to_virt(unsigned long x) #define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET) #endif #endif +#endif /* __ASSEMBLY__ */ #ifndef PHYS_OFFSET #ifdef PLAT_PHYS_OFFSET @@ -196,6 +197,8 @@ static inline unsigned long __phys_to_virt(unsigned long x) #endif #endif +#ifndef __ASSEMBLY__ + /* * PFNs are used to describe any physical page; this means * PFN 0 == physical address 0. diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 314d466..99a1951 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -199,6 +199,9 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, { pgtable_page_dtor(pte); +#ifdef CONFIG_ARM_LPAE + tlb_add_flush(tlb, addr); +#else /* * With the classic ARM MMU, a pte page has two corresponding pmd * entries, each covering 1MB. @@ -206,6 +209,7 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, addr &= PMD_MASK; tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE); tlb_add_flush(tlb, addr + SZ_1M); +#endif tlb_remove_page(tlb, pte); } diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 479a635..77bd79f 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -101,28 +101,39 @@ extern int __get_user_1(void *); extern int __get_user_2(void *); extern int __get_user_4(void *); -#define __get_user_x(__r2,__p,__e,__s,__i...) \ +#define __GUP_CLOBBER_1 "lr", "cc" +#ifdef CONFIG_CPU_USE_DOMAINS +#define __GUP_CLOBBER_2 "ip", "lr", "cc" +#else +#define __GUP_CLOBBER_2 "lr", "cc" +#endif +#define __GUP_CLOBBER_4 "lr", "cc" + +#define __get_user_x(__r2,__p,__e,__l,__s) \ __asm__ __volatile__ ( \ __asmeq("%0", "r0") __asmeq("%1", "r2") \ + __asmeq("%3", "r1") \ "bl __get_user_" #__s \ : "=&r" (__e), "=r" (__r2) \ - : "0" (__p) \ - : __i, "cc") + : "0" (__p), "r" (__l) \ + : __GUP_CLOBBER_##__s) -#define get_user(x,p) \ +#define __get_user_check(x,p) \ ({ \ + unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __user *__p asm("r0") = (p);\ register unsigned long __r2 asm("r2"); \ + register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ case 1: \ - __get_user_x(__r2, __p, __e, 1, "lr"); \ - break; \ + __get_user_x(__r2, __p, __e, __l, 1); \ + break; \ case 2: \ - __get_user_x(__r2, __p, __e, 2, "r3", "lr"); \ + __get_user_x(__r2, __p, __e, __l, 2); \ break; \ case 4: \ - __get_user_x(__r2, __p, __e, 4, "lr"); \ + __get_user_x(__r2, __p, __e, __l, 4); \ break; \ default: __e = __get_user_bad(); break; \ } \ @@ -130,42 +141,57 @@ extern int __get_user_4(void *); __e; \ }) +#define get_user(x,p) \ + ({ \ + might_fault(); \ + __get_user_check(x,p); \ + }) + extern int __put_user_1(void *, unsigned int); extern int __put_user_2(void *, unsigned int); extern int __put_user_4(void *, unsigned int); extern int __put_user_8(void *, unsigned long long); -#define __put_user_x(__r2,__p,__e,__s) \ +#define __put_user_x(__r2,__p,__e,__l,__s) \ __asm__ __volatile__ ( \ __asmeq("%0", "r0") __asmeq("%2", "r2") \ + __asmeq("%3", "r1") \ "bl __put_user_" #__s \ : "=&r" (__e) \ - : "0" (__p), "r" (__r2) \ + : "0" (__p), "r" (__r2), "r" (__l) \ : "ip", "lr", "cc") -#define put_user(x,p) \ +#define __put_user_check(x,p) \ ({ \ + unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __r2 asm("r2") = (x); \ register const typeof(*(p)) __user *__p asm("r0") = (p);\ + register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ case 1: \ - __put_user_x(__r2, __p, __e, 1); \ + __put_user_x(__r2, __p, __e, __l, 1); \ break; \ case 2: \ - __put_user_x(__r2, __p, __e, 2); \ + __put_user_x(__r2, __p, __e, __l, 2); \ break; \ case 4: \ - __put_user_x(__r2, __p, __e, 4); \ + __put_user_x(__r2, __p, __e, __l, 4); \ break; \ case 8: \ - __put_user_x(__r2, __p, __e, 8); \ + __put_user_x(__r2, __p, __e, __l, 8); \ break; \ default: __e = __put_user_bad(); break; \ } \ __e; \ }) +#define put_user(x,p) \ + ({ \ + might_fault(); \ + __put_user_check(x,p); \ + }) + #else /* CONFIG_MMU */ /* @@ -219,6 +245,7 @@ do { \ unsigned long __gu_addr = (unsigned long)(ptr); \ unsigned long __gu_val; \ __chk_user_ptr(ptr); \ + might_fault(); \ switch (sizeof(*(ptr))) { \ case 1: __get_user_asm_byte(__gu_val,__gu_addr,err); break; \ case 2: __get_user_asm_half(__gu_val,__gu_addr,err); break; \ @@ -300,6 +327,7 @@ do { \ unsigned long __pu_addr = (unsigned long)(ptr); \ __typeof__(*(ptr)) __pu_val = (x); \ __chk_user_ptr(ptr); \ + might_fault(); \ switch (sizeof(*(ptr))) { \ case 1: __put_user_asm_byte(__pu_val,__pu_addr,err); break; \ case 2: __put_user_asm_half(__pu_val,__pu_addr,err); break; \ diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index ba386bd..281bf33 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -159,6 +159,12 @@ static int debug_arch_supported(void) arch >= ARM_DEBUG_ARCH_V7_1; } +/* Can we determine the watchpoint access type from the fsr? */ +static int debug_exception_updates_fsr(void) +{ + return 0; +} + /* Determine number of WRP registers available. */ static int get_num_wrp_resources(void) { @@ -604,13 +610,14 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) /* Aligned */ break; case 1: - /* Allow single byte watchpoint. */ - if (info->ctrl.len == ARM_BREAKPOINT_LEN_1) - break; case 2: /* Allow halfword watchpoints and breakpoints. */ if (info->ctrl.len == ARM_BREAKPOINT_LEN_2) break; + case 3: + /* Allow single byte watchpoint. */ + if (info->ctrl.len == ARM_BREAKPOINT_LEN_1) + break; default: ret = -EINVAL; goto out; @@ -619,18 +626,35 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) info->address &= ~alignment_mask; info->ctrl.len <<= offset; - /* - * Currently we rely on an overflow handler to take - * care of single-stepping the breakpoint when it fires. - * In the case of userspace breakpoints on a core with V7 debug, - * we can use the mismatch feature as a poor-man's hardware - * single-step, but this only works for per-task breakpoints. - */ - if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) || - !core_has_mismatch_brps() || !bp->hw.bp_target)) { - pr_warning("overflow handler required but none found\n"); - ret = -EINVAL; + if (!bp->overflow_handler) { + /* + * Mismatch breakpoints are required for single-stepping + * breakpoints. + */ + if (!core_has_mismatch_brps()) + return -EINVAL; + + /* We don't allow mismatch breakpoints in kernel space. */ + if (arch_check_bp_in_kernelspace(bp)) + return -EPERM; + + /* + * Per-cpu breakpoints are not supported by our stepping + * mechanism. + */ + if (!bp->hw.bp_target) + return -EINVAL; + + /* + * We only support specific access types if the fsr + * reports them. + */ + if (!debug_exception_updates_fsr() && + (info->ctrl.type == ARM_BREAKPOINT_LOAD || + info->ctrl.type == ARM_BREAKPOINT_STORE)) + return -EINVAL; } + out: return ret; } @@ -706,10 +730,12 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr, goto unlock; /* Check that the access type matches. */ - access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W : - HW_BREAKPOINT_R; - if (!(access & hw_breakpoint_type(wp))) - goto unlock; + if (debug_exception_updates_fsr()) { + access = (fsr & ARM_FSR_ACCESS_MASK) ? + HW_BREAKPOINT_W : HW_BREAKPOINT_R; + if (!(access & hw_breakpoint_type(wp))) + goto unlock; + } /* We have a winner. */ info->trigger = addr; diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index f794521..b0179b8 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -420,20 +420,23 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs) #endif instr = *(u32 *) pc; } else if (thumb_mode(regs)) { - get_user(instr, (u16 __user *)pc); + if (get_user(instr, (u16 __user *)pc)) + goto die_sig; if (is_wide_instruction(instr)) { unsigned int instr2; - get_user(instr2, (u16 __user *)pc+1); + if (get_user(instr2, (u16 __user *)pc+1)) + goto die_sig; instr <<= 16; instr |= instr2; } - } else { - get_user(instr, (u32 __user *)pc); + } else if (get_user(instr, (u32 __user *)pc)) { + goto die_sig; } if (call_undef_hook(regs, instr) == 0) return; +die_sig: #ifdef CONFIG_DEBUG_USER if (user_debug & UDBG_UNDEFINED) { printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n", diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index d6dacc6..395d5fb 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -59,6 +59,7 @@ void __init init_current_timer_delay(unsigned long freq) { pr_info("Switching to timer-based delay loop\n"); lpj_fine = freq / HZ; + loops_per_jiffy = lpj_fine; arm_delay_ops.delay = __timer_delay; arm_delay_ops.const_udelay = __timer_const_udelay; arm_delay_ops.udelay = __timer_udelay; diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index 11093a7..9b06bb4 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -16,8 +16,9 @@ * __get_user_X * * Inputs: r0 contains the address + * r1 contains the address limit, which must be preserved * Outputs: r0 is the error code - * r2, r3 contains the zero-extended value + * r2 contains the zero-extended value * lr corrupted * * No other registers must be altered. (see <asm/uaccess.h> @@ -27,33 +28,39 @@ * Note also that it is intended that __get_user_bad is not global. */ #include <linux/linkage.h> +#include <asm/assembler.h> #include <asm/errno.h> #include <asm/domain.h> ENTRY(__get_user_1) + check_uaccess r0, 1, r1, r2, __get_user_bad 1: TUSER(ldrb) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__get_user_1) ENTRY(__get_user_2) -#ifdef CONFIG_THUMB2_KERNEL -2: TUSER(ldrb) r2, [r0] -3: TUSER(ldrb) r3, [r0, #1] + check_uaccess r0, 2, r1, r2, __get_user_bad +#ifdef CONFIG_CPU_USE_DOMAINS +rb .req ip +2: ldrbt r2, [r0], #1 +3: ldrbt rb, [r0], #0 #else -2: TUSER(ldrb) r2, [r0], #1 -3: TUSER(ldrb) r3, [r0] +rb .req r0 +2: ldrb r2, [r0] +3: ldrb rb, [r0, #1] #endif #ifndef __ARMEB__ - orr r2, r2, r3, lsl #8 + orr r2, r2, rb, lsl #8 #else - orr r2, r3, r2, lsl #8 + orr r2, rb, r2, lsl #8 #endif mov r0, #0 mov pc, lr ENDPROC(__get_user_2) ENTRY(__get_user_4) + check_uaccess r0, 4, r1, r2, __get_user_bad 4: TUSER(ldr) r2, [r0] mov r0, #0 mov pc, lr diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index 7db2599..3d73dcb 100644 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -16,6 +16,7 @@ * __put_user_X * * Inputs: r0 contains the address + * r1 contains the address limit, which must be preserved * r2, r3 contains the value * Outputs: r0 is the error code * lr corrupted @@ -27,16 +28,19 @@ * Note also that it is intended that __put_user_bad is not global. */ #include <linux/linkage.h> +#include <asm/assembler.h> #include <asm/errno.h> #include <asm/domain.h> ENTRY(__put_user_1) + check_uaccess r0, 1, r1, ip, __put_user_bad 1: TUSER(strb) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__put_user_1) ENTRY(__put_user_2) + check_uaccess r0, 2, r1, ip, __put_user_bad mov ip, r2, lsr #8 #ifdef CONFIG_THUMB2_KERNEL #ifndef __ARMEB__ @@ -60,12 +64,14 @@ ENTRY(__put_user_2) ENDPROC(__put_user_2) ENTRY(__put_user_4) + check_uaccess r0, 4, r1, ip, __put_user_bad 4: TUSER(str) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__put_user_4) ENTRY(__put_user_8) + check_uaccess r0, 8, r1, ip, __put_user_bad #ifdef CONFIG_THUMB2_KERNEL 5: TUSER(str) r2, [r0] 6: TUSER(str) r3, [r0, #4] diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 104ca40..aaa443b 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -197,7 +197,7 @@ void __init at91rm9200_timer_init(void) at91_st_read(AT91_ST_SR); /* Make IRQs happen for the system timer */ - setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq); + setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq); /* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used * directly for the clocksource and all clockevents, after adjusting diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 7b9c2ba..bce572a 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -726,6 +726,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, }, }; @@ -744,10 +746,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9260_rtt_device.num_resources = 2; + at91sam9260_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9260_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 8df5c1bd..bc2590d 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -609,6 +609,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -626,10 +628,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9261_rtt_device.num_resources = 2; + at91sam9261_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9261_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index eb6bbf8..9b6ca73 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -990,6 +990,8 @@ static struct resource rtt0_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1006,6 +1008,8 @@ static struct resource rtt1_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1027,14 +1031,14 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed only for the chosen RTT: * GPBR will serve as the storage for RTC time offset */ - at91sam9263_rtt0_device.num_resources = 2; + at91sam9263_rtt0_device.num_resources = 3; at91sam9263_rtt1_device.num_resources = 1; pdev = &at91sam9263_rtt0_device; r = rtt0_resources; break; case 1: at91sam9263_rtt0_device.num_resources = 1; - at91sam9263_rtt1_device.num_resources = 2; + at91sam9263_rtt1_device.num_resources = 3; pdev = &at91sam9263_rtt1_device; r = rtt1_resources; break; @@ -1047,6 +1051,8 @@ static void __init at91_add_device_rtt_rtc(void) pdev->name = "rtc-at91sam9"; r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; r[1].end = r[1].start + 3; + r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 0607399..1b47319 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1293,6 +1293,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1310,10 +1312,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9g45_rtt_device.num_resources = 2; + at91sam9g45_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9G45_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index f09fff9..b3d365d 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -688,6 +688,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -705,10 +707,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9rl_rtt_device.num_resources = 2; + at91sam9rl_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9RL_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index de2ec6b..188c829 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -63,6 +63,12 @@ EXPORT_SYMBOL_GPL(at91_pmc_base); #define cpu_has_300M_plla() (cpu_is_at91sam9g10()) +#define cpu_has_240M_plla() (cpu_is_at91sam9261() \ + || cpu_is_at91sam9263() \ + || cpu_is_at91sam9rl()) + +#define cpu_has_210M_plla() (cpu_is_at91sam9260()) + #define cpu_has_pllb() (!(cpu_is_at91sam9rl() \ || cpu_is_at91sam9g45() \ || cpu_is_at91sam9x5() \ @@ -706,6 +712,12 @@ static int __init at91_pmc_init(unsigned long main_clock) } else if (cpu_has_800M_plla()) { if (plla.rate_hz > 800000000) pll_overclock = true; + } else if (cpu_has_240M_plla()) { + if (plla.rate_hz > 240000000) + pll_overclock = true; + } else if (cpu_has_210M_plla()) { + if (plla.rate_hz > 210000000) + pll_overclock = true; } else { if (plla.rate_hz > 209000000) pll_overclock = true; diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 4db5de5..6321567 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -102,7 +102,8 @@ void __init dove_ehci1_init(void) void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, DOVE_GE00_PHYS_BASE, - IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR); + IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR, + 1600); } /***************************************************************************** diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 5ca8030..4e574c2 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -42,6 +42,7 @@ #include <plat/backlight.h> #include <plat/fb.h> #include <plat/mfc.h> +#include <plat/hdmi.h> #include <mach/ohci.h> #include <mach/map.h> @@ -734,6 +735,11 @@ static void __init origen_bt_setup(void) s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE); } +/* I2C module and id for HDMIPHY */ +static struct i2c_board_info hdmiphy_info = { + I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), +}; + static void s5p_tv_setup(void) { /* Direct HPD to HDMI chip */ @@ -781,6 +787,7 @@ static void __init origen_machine_init(void) s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); + s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); #ifdef CONFIG_DRM_EXYNOS s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 3cfa688..73f2bce 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -40,6 +40,7 @@ #include <plat/mfc.h> #include <plat/ehci.h> #include <plat/clock.h> +#include <plat/hdmi.h> #include <mach/map.h> #include <mach/ohci.h> @@ -354,6 +355,11 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = { .pwm_period_ns = 1000, }; +/* I2C module and id for HDMIPHY */ +static struct i2c_board_info hdmiphy_info = { + I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), +}; + static void s5p_tv_setup(void) { /* direct HPD to HDMI chip */ @@ -388,6 +394,7 @@ static void __init smdkv310_machine_init(void) s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); + s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); samsung_keypad_set_platdata(&smdkv310_keypad_data); diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c index ca70e5f..020852d 100644 --- a/arch/arm/mach-gemini/irq.c +++ b/arch/arm/mach-gemini/irq.c @@ -17,6 +17,7 @@ #include <linux/sched.h> #include <asm/irq.h> #include <asm/mach/irq.h> +#include <asm/system_misc.h> #include <mach/hardware.h> #define IRQ_SOURCE(base_addr) (base_addr + 0x00) diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 07f7c22..d004d37 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -9,7 +9,8 @@ obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o -obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o +imx5-pm-$(CONFIG_PM) += pm-imx5.o +obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ clk-pfd.o clk-busy.o @@ -70,14 +71,13 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o obj-$(CONFIG_HAVE_IMX_SRC) += src.o -obj-$(CONFIG_CPU_V7) += head-v7.o -AFLAGS_head-v7.o :=-Wa,-march=armv7-a -obj-$(CONFIG_SMP) += platsmp.o +AFLAGS_headsmp.o :=-Wa,-march=armv7-a +obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o ifeq ($(CONFIG_PM),y) -obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o +obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o endif # i.MX5 based machines diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index fdd8cc8..4431a62 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -222,10 +222,8 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0"); clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0"); clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[ssi1_ipg_per], "per", "imx-ssi.0"); - clk_register_clkdev(clk[ssi1_ipg], "ipg", "imx-ssi.0"); - clk_register_clkdev(clk[ssi2_ipg_per], "per", "imx-ssi.1"); - clk_register_clkdev(clk[ssi2_ipg], "ipg", "imx-ssi.1"); + clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0"); + clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1"); clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0"); clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0"); clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0"); diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index c6422fb..65fb8bc 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -230,10 +230,8 @@ int __init mx35_clocks_init() clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1"); clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma"); - clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.0"); - clk_register_clkdev(clk[ssi1_div_post], "per", "imx-ssi.0"); - clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.1"); - clk_register_clkdev(clk[ssi2_div_post], "per", "imx-ssi.1"); + clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0"); + clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1"); /* i.mx35 has the i.mx21 type uart */ clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0"); clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0"); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index ea89520..4233d9e 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -152,7 +152,7 @@ enum mx6q_clks { ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3, usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg, - ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, + ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5, clk_max }; @@ -288,8 +288,10 @@ int __init mx6q_clocks_init(void) clk[gpu3d_shader] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3); clk[ipu1_podf] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3); clk[ipu2_podf] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3); - clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_sel", base + 0x20, 10, 1); - clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_sel", base + 0x20, 11, 1); + clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); + clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1); + clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); + clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1); clk[ipu1_di0_pre] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3); clk[ipu1_di1_pre] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3); clk[ipu2_di0_pre] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3); diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/headsmp.S index 7e49deb..7e49deb 100644 --- a/arch/arm/mach-imx/head-v7.S +++ b/arch/arm/mach-imx/headsmp.S diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 20ed2d5..f8f7437 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -42,22 +42,6 @@ static inline void cpu_enter_lowpower(void) : "cc"); } -static inline void cpu_leave_lowpower(void) -{ - unsigned int v; - - asm volatile( - "mrc p15, 0, %0, c1, c0, 0\n" - " orr %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 0\n" - " mrc p15, 0, %0, c1, c0, 1\n" - " orr %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 1\n" - : "=&r" (v) - : "Ir" (CR_C), "Ir" (0x40) - : "cc"); -} - /* * platform-specific code to shutdown a CPU * @@ -67,11 +51,10 @@ void platform_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); imx_enable_cpu(cpu, false); - cpu_do_idle(); - cpu_leave_lowpower(); - /* We should never return from idle */ - panic("cpu %d unexpectedly exit from shutdown\n", cpu); + /* spin here until hardware takes it down */ + while (1) + ; } int platform_cpu_disable(unsigned int cpu) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 5ec0608..045b3f6 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -71,7 +71,7 @@ soft: /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */ static int ksz9021rn_phy_fixup(struct phy_device *phydev) { - if (IS_ENABLED(CONFIG_PHYLIB)) { + if (IS_BUILTIN(CONFIG_PHYLIB)) { /* min rx data delay */ phy_write(phydev, 0x0b, 0x8105); phy_write(phydev, 0x0c, 0x0000); @@ -112,7 +112,7 @@ put_clk: static void __init imx6q_sabrelite_init(void) { - if (IS_ENABLED(CONFIG_PHYLIB)) + if (IS_BUILTIN(CONFIG_PHYLIB)) phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, ksz9021rn_phy_fixup); imx6q_sabrelite_cko1_setup(); diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index a571755..a13299d 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -7,7 +7,8 @@ dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb -dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6281.dtb +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6282.dtb dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index c4b64ad..1201191 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -301,7 +301,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM, - IRQ_KIRKWOOD_GE00_ERR); + IRQ_KIRKWOOD_GE00_ERR, 1600); /* The interface forgets the MAC address assigned by u-boot if the clock is turned off, so claim the clk now. */ clk_prepare_enable(ge0); @@ -315,7 +315,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM, - IRQ_KIRKWOOD_GE01_ERR); + IRQ_KIRKWOOD_GE01_ERR, 1600); clk_prepare_enable(ge1); } @@ -517,6 +517,13 @@ void __init kirkwood_wdt_init(void) void __init kirkwood_init_early(void) { orion_time_set_base(TIMER_VIRT_BASE); + + /* + * Some Kirkwood devices allocate their coherent buffers from atomic + * context. Increase size of atomic coherent pool to make sure such + * the allocations won't fail. + */ + init_dma_coherent_pool_size(SZ_1M); } int kirkwood_tclk; diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c index d933593..be90b7d 100644 --- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c +++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/init.h> +#include <linux/sizes.h> #include <linux/platform_device.h> #include <linux/mtd/partitions.h> #include <linux/ata_platform.h> diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c index 4304f95..7e8a5a2 100644 --- a/arch/arm/mach-mmp/sram.c +++ b/arch/arm/mach-mmp/sram.c @@ -68,7 +68,7 @@ static int __devinit sram_probe(struct platform_device *pdev) struct resource *res; int ret = 0; - if (!pdata && !pdata->pool_name) + if (!pdata || !pdata->pool_name) return -ENODEV; info = kzalloc(sizeof(*info), GFP_KERNEL); diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c index 62b53d7..a9bc841 100644 --- a/arch/arm/mach-mv78xx0/addr-map.c +++ b/arch/arm/mach-mv78xx0/addr-map.c @@ -37,7 +37,7 @@ #define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4)) #define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4)) -static void __init __iomem *win_cfg_base(int win) +static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, int win) { /* * Find the control register base address for this window. diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index b4c53b8..3057f7d 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -213,7 +213,8 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM, - IRQ_MV78XX0_GE_ERR); + IRQ_MV78XX0_GE_ERR, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } @@ -224,7 +225,8 @@ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM, - NO_IRQ); + NO_IRQ, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index dd2db02..346fd26 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -62,13 +62,14 @@ config ARCH_OMAP4 select PM_OPP if PM select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARM_CPU_SUSPEND if PM - select ARCH_NEEDS_CPU_IDLE_COUPLED + select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP config SOC_OMAP5 bool "TI OMAP5" select CPU_V7 select ARM_GIC select HAVE_SMP + select ARM_CPU_SUSPEND if PM comment "OMAP Core Type" depends on ARCH_OMAP2 @@ -231,10 +232,11 @@ config MACH_OMAP3_PANDORA select OMAP_PACKAGE_CBB select REGULATOR_FIXED_VOLTAGE if REGULATOR -config MACH_OMAP3_TOUCHBOOK +config MACH_TOUCHBOOK bool "OMAP3 Touch Book" depends on ARCH_OMAP3 default y + select OMAP_PACKAGE_CBB config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index f6a24b3..34c2c7f 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -255,7 +255,7 @@ obj-$(CONFIG_MACH_OMAP_3630SDP) += board-zoom-display.o obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o -obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o +obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 7491529..2821448 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -554,6 +554,8 @@ static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = { #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + /* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */ + OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 9894e3d..3d2a988 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -59,6 +59,7 @@ #include "hsmmc.h" #include "common-board-devices.h" +#define OMAP3_EVM_TS_GPIO 175 #define OMAP3_EVM_EHCI_VBUS 22 #define OMAP3_EVM_EHCI_SELECT 61 diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c index 25bbcc7..ae27de8 100644 --- a/arch/arm/mach-omap2/clock33xx_data.c +++ b/arch/arm/mach-omap2/clock33xx_data.c @@ -1036,13 +1036,13 @@ static struct omap_clk am33xx_clks[] = { CLK(NULL, "mmu_fck", &mmu_fck, CK_AM33XX), CLK(NULL, "smartreflex0_fck", &smartreflex0_fck, CK_AM33XX), CLK(NULL, "smartreflex1_fck", &smartreflex1_fck, CK_AM33XX), - CLK(NULL, "gpt1_fck", &timer1_fck, CK_AM33XX), - CLK(NULL, "gpt2_fck", &timer2_fck, CK_AM33XX), - CLK(NULL, "gpt3_fck", &timer3_fck, CK_AM33XX), - CLK(NULL, "gpt4_fck", &timer4_fck, CK_AM33XX), - CLK(NULL, "gpt5_fck", &timer5_fck, CK_AM33XX), - CLK(NULL, "gpt6_fck", &timer6_fck, CK_AM33XX), - CLK(NULL, "gpt7_fck", &timer7_fck, CK_AM33XX), + CLK(NULL, "timer1_fck", &timer1_fck, CK_AM33XX), + CLK(NULL, "timer2_fck", &timer2_fck, CK_AM33XX), + CLK(NULL, "timer3_fck", &timer3_fck, CK_AM33XX), + CLK(NULL, "timer4_fck", &timer4_fck, CK_AM33XX), + CLK(NULL, "timer5_fck", &timer5_fck, CK_AM33XX), + CLK(NULL, "timer6_fck", &timer6_fck, CK_AM33XX), + CLK(NULL, "timer7_fck", &timer7_fck, CK_AM33XX), CLK(NULL, "usbotg_fck", &usbotg_fck, CK_AM33XX), CLK(NULL, "ieee5000_fck", &ieee5000_fck, CK_AM33XX), CLK(NULL, "wdt1_fck", &wdt1_fck, CK_AM33XX), diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c index a0d68db..f99e65c 100644 --- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c @@ -241,6 +241,52 @@ static void omap3_clkdm_deny_idle(struct clockdomain *clkdm) _clkdm_del_autodeps(clkdm); } +static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + if (!clkdm->clktrctrl_mask) + return 0; + + hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (hwsup) { + /* Disable HW transitions when we are changing deps */ + _disable_hwsup(clkdm); + _clkdm_add_autodeps(clkdm); + _enable_hwsup(clkdm); + } else { + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + omap3_clkdm_wakeup(clkdm); + } + + return 0; +} + +static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + if (!clkdm->clktrctrl_mask) + return 0; + + hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (hwsup) { + /* Disable HW transitions when we are changing deps */ + _disable_hwsup(clkdm); + _clkdm_del_autodeps(clkdm); + _enable_hwsup(clkdm); + } else { + if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP) + omap3_clkdm_sleep(clkdm); + } + + return 0; +} + struct clkdm_ops omap2_clkdm_operations = { .clkdm_add_wkdep = omap2_clkdm_add_wkdep, .clkdm_del_wkdep = omap2_clkdm_del_wkdep, @@ -267,6 +313,6 @@ struct clkdm_ops omap3_clkdm_operations = { .clkdm_wakeup = omap3_clkdm_wakeup, .clkdm_allow_idle = omap3_clkdm_allow_idle, .clkdm_deny_idle = omap3_clkdm_deny_idle, - .clkdm_clk_enable = omap2_clkdm_clk_enable, - .clkdm_clk_disable = omap2_clkdm_clk_disable, + .clkdm_clk_enable = omap3xxx_clkdm_clk_enable, + .clkdm_clk_disable = omap3xxx_clkdm_clk_disable, }; diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index 766338f..975f6bd 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -67,6 +67,7 @@ #define OMAP3430_EN_IVA2_DPLL_MASK (0x7 << 0) /* CM_IDLEST_IVA2 */ +#define OMAP3430_ST_IVA2_SHIFT 0 #define OMAP3430_ST_IVA2_MASK (1 << 0) /* CM_IDLEST_PLL_IVA2 */ diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 1473474..c187586 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -35,16 +35,6 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = { .turbo_mode = 0, }; -/* - * ADS7846 driver maybe request a gpio according to the value - * of pdata->get_pendown_state, but we have done this. So set - * get_pendown_state to avoid twice gpio requesting. - */ -static int omap3_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_EVM_TS_GPIO); -} - static struct ads7846_platform_data ads7846_config = { .x_max = 0x0fff, .y_max = 0x0fff, @@ -55,7 +45,6 @@ static struct ads7846_platform_data ads7846_config = { .debounce_rep = 1, .gpio_pendown = -EINVAL, .keep_vref_on = 1, - .get_pendown_state = &omap3_get_pendown_state, }; static struct spi_board_info ads7846_spi_board_info __initdata = { diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index 4c4ef6a..a0b4a428 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -4,7 +4,6 @@ #include "twl-common.h" #define NAND_BLOCK_SIZE SZ_128K -#define OMAP3_EVM_TS_GPIO 175 struct mtd_partition; struct ads7846_platform_data; diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index ee05e19..288bee6 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -238,8 +238,9 @@ int __init omap4_idle_init(void) for_each_cpu(cpu_id, cpu_online_mask) { dev = &per_cpu(omap4_idle_dev, cpu_id); dev->cpu = cpu_id; +#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED dev->coupled_cpus = *cpu_online_mask; - +#endif cpuidle_register_driver(&omap4_idle_driver); if (cpuidle_register_device(dev)) { diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 471e62a7..76f9b3c 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -127,7 +127,6 @@ struct omap_mux_partition { * @gpio: GPIO number * @muxnames: available signal modes for a ball * @balls: available balls on the package - * @partition: mux partition */ struct omap_mux { u16 reg_offset; diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 05fdebf..330d4c6 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -46,7 +46,7 @@ static void __iomem *wakeupgen_base; static void __iomem *sar_base; static DEFINE_SPINLOCK(wakeupgen_lock); -static unsigned int irq_target_cpu[NR_IRQS]; +static unsigned int irq_target_cpu[MAX_IRQS]; static unsigned int irq_banks = MAX_NR_REG_BANKS; static unsigned int max_irqs = MAX_IRQS; static unsigned int omap_secure_apis; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 6ca8e51..37afbd1 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1889,6 +1889,7 @@ static int _enable(struct omap_hwmod *oh) _enable_sysc(oh); } } else { + _omap4_disable_module(oh); _disable_clocks(oh); pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n", oh->name, r); diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index c9e3820..ce7e606 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -100,9 +100,9 @@ static struct omap_hwmod omap3xxx_mpu_hwmod = { /* IVA2 (IVA2) */ static struct omap_hwmod_rst_info omap3xxx_iva_resets[] = { - { .name = "logic", .rst_shift = 0 }, - { .name = "seq0", .rst_shift = 1 }, - { .name = "seq1", .rst_shift = 2 }, + { .name = "logic", .rst_shift = 0, .st_shift = 8 }, + { .name = "seq0", .rst_shift = 1, .st_shift = 9 }, + { .name = "seq1", .rst_shift = 2, .st_shift = 10 }, }; static struct omap_hwmod omap3xxx_iva_hwmod = { @@ -112,6 +112,15 @@ static struct omap_hwmod omap3xxx_iva_hwmod = { .rst_lines = omap3xxx_iva_resets, .rst_lines_cnt = ARRAY_SIZE(omap3xxx_iva_resets), .main_clk = "iva2_ck", + .prcm = { + .omap2 = { + .module_offs = OMAP3430_IVA2_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT, + } + }, }; /* timer class */ diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 3c19120..64b564f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -4210,7 +4210,7 @@ static struct omap_hwmod_ocp_if omap44xx_dsp__iva = { }; /* dsp -> sl2if */ -static struct omap_hwmod_ocp_if omap44xx_dsp__sl2if = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_dsp__sl2if = { .master = &omap44xx_dsp_hwmod, .slave = &omap44xx_sl2if_hwmod, .clk = "dpll_iva_m5x2_ck", @@ -4828,7 +4828,7 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = { }; /* iva -> sl2if */ -static struct omap_hwmod_ocp_if omap44xx_iva__sl2if = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_iva__sl2if = { .master = &omap44xx_iva_hwmod, .slave = &omap44xx_sl2if_hwmod, .clk = "dpll_iva_m5x2_ck", @@ -5362,7 +5362,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_wkup__scrm = { }; /* l3_main_2 -> sl2if */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__sl2if = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l3_main_2__sl2if = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_sl2if_hwmod, .clk = "l3_div_ck", @@ -6038,7 +6038,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_abe__dmic, &omap44xx_l4_abe__dmic_dma, &omap44xx_dsp__iva, - &omap44xx_dsp__sl2if, + /* &omap44xx_dsp__sl2if, */ &omap44xx_l4_cfg__dsp, &omap44xx_l3_main_2__dss, &omap44xx_l4_per__dss, @@ -6074,7 +6074,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_per__i2c4, &omap44xx_l3_main_2__ipu, &omap44xx_l3_main_2__iss, - &omap44xx_iva__sl2if, + /* &omap44xx_iva__sl2if, */ &omap44xx_l3_main_2__iva, &omap44xx_l4_wkup__kbd, &omap44xx_l4_cfg__mailbox, @@ -6105,7 +6105,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_cfg__cm_core, &omap44xx_l4_wkup__prm, &omap44xx_l4_wkup__scrm, - &omap44xx_l3_main_2__sl2if, + /* &omap44xx_l3_main_2__sl2if, */ &omap44xx_l4_abe__slimbus1, &omap44xx_l4_abe__slimbus1_dma, &omap44xx_l4_per__slimbus2, diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c index 2293ba2..c95415d 100644 --- a/arch/arm/mach-omap2/opp4xxx_data.c +++ b/arch/arm/mach-omap2/opp4xxx_data.c @@ -94,7 +94,7 @@ int __init omap4_opp_init(void) { int r = -ENODEV; - if (!cpu_is_omap44xx()) + if (!cpu_is_omap443x()) return r; r = omap_init_opp_table(omap44xx_opp_def_list, diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index e4fc88c..05bd8f0 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -272,21 +272,16 @@ void omap_sram_idle(void) per_next_state = pwrdm_read_next_pwrst(per_pwrdm); core_next_state = pwrdm_read_next_pwrst(core_pwrdm); - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(mpu_pwrdm); - pwrdm_pre_transition(neon_pwrdm); - } + pwrdm_pre_transition(NULL); /* PER */ if (per_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(per_pwrdm); per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0; omap2_gpio_prepare_for_idle(per_going_off); } /* CORE */ if (core_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(core_pwrdm); if (core_next_state == PWRDM_POWER_OFF) { omap3_core_save_context(); omap3_cm_save_context(); @@ -339,20 +334,14 @@ void omap_sram_idle(void) omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK, OMAP3430_GR_MOD, OMAP3_PRM_VOLTCTRL_OFFSET); - pwrdm_post_transition(core_pwrdm); } omap3_intc_resume_idle(); + pwrdm_post_transition(NULL); + /* PER */ - if (per_next_state < PWRDM_POWER_ON) { + if (per_next_state < PWRDM_POWER_ON) omap2_gpio_resume_after_idle(); - pwrdm_post_transition(per_pwrdm); - } - - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_post_transition(mpu_pwrdm); - pwrdm_post_transition(neon_pwrdm); - } } static void omap3_pm_idle(void) diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 9f6b83d..91e71d8 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -56,9 +56,13 @@ ppa_por_params: * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET. * It returns to the caller for CPU INACTIVE and ON power states or in case * CPU failed to transition to targeted OFF/DORMANT state. + * + * omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save + * stack frame and it expects the caller to take care of it. Hence the entire + * stack frame is saved to avoid possible stack corruption. */ ENTRY(omap4_finish_suspend) - stmfd sp!, {lr} + stmfd sp!, {r4-r12, lr} cmp r0, #0x0 beq do_WFI @ No lowpower state, jump to WFI @@ -226,7 +230,7 @@ scu_gp_clear: skip_scu_gp_clear: isb dsb - ldmfd sp!, {pc} + ldmfd sp!, {r4-r12, pc} ENDPROC(omap4_finish_suspend) /* diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 2ff6d41..2ba4f57 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -260,6 +260,7 @@ static u32 notrace dmtimer_read_sched_clock(void) return 0; } +#ifdef CONFIG_OMAP_32K_TIMER /* Setup free-running counter for clocksource */ static int __init omap2_sync32k_clocksource_init(void) { @@ -299,6 +300,12 @@ static int __init omap2_sync32k_clocksource_init(void) return ret; } +#else +static inline int omap2_sync32k_clocksource_init(void) +{ + return -ENODEV; +} +#endif static void __init omap2_gptimer_clocksource_init(int gptimer_id, const char *fck_source) diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index e2cdf67..329b726 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -67,6 +67,7 @@ void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) { + omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); strncpy(pmic_i2c_board_info.type, pmic_type, sizeof(pmic_i2c_board_info.type)); pmic_i2c_board_info.irq = pmic_irq; diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 9148b22..410291c 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -109,7 +109,8 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM, - IRQ_ORION5X_ETH_ERR); + IRQ_ORION5X_ETH_ERR, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h index 454831b..ee99fd5 100644 --- a/arch/arm/mach-s3c24xx/include/mach/dma.h +++ b/arch/arm/mach-s3c24xx/include/mach/dma.h @@ -24,7 +24,8 @@ */ enum dma_ch { - DMACH_XD0, + DMACH_DT_PROP = -1, /* not yet supported, do not use */ + DMACH_XD0 = 0, DMACH_XD1, DMACH_SDI, DMACH_SPI0, diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index cf10f92..453a6e5 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -520,13 +520,14 @@ static struct platform_device hdmi_lcdc_device = { }; /* GPIO KEY */ -#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 } +#define GPIO_KEY(c, g, d, ...) \ + { .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ } static struct gpio_keys_button gpio_buttons[] = { - GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW1"), - GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW2"), - GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW3"), - GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW4"), + GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW3", .wakeup = 1), + GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW4"), + GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW5"), + GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW6"), }; static struct gpio_keys_platform_data gpio_key_info = { @@ -901,8 +902,8 @@ static struct platform_device *eva_devices[] __initdata = { &camera_device, &ceu0_device, &fsi_device, - &fsi_hdmi_device, &fsi_wm8978_device, + &fsi_hdmi_device, }; static void __init eva_clock_init(void) diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 7ea2b31..c129542 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -695,6 +695,7 @@ static struct platform_device usbhs0_device = { * - J30 "open" * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET * - add .get_vbus = usbhs_get_vbus in usbhs1_private + * - check usbhs0_device(pio)/usbhs1_device(irq) order in mackerel_devices. */ #define IRQ8 evt2irq(0x0300) #define USB_PHY_MODE (1 << 4) @@ -1325,8 +1326,8 @@ static struct platform_device *mackerel_devices[] __initdata = { &nor_flash_device, &smc911x_device, &lcdc_device, - &usbhs1_device, &usbhs0_device, + &usbhs1_device, &leds_device, &fsi_device, &fsi_ak4643_device, diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 3a528cf..fcf5a47 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -67,7 +67,7 @@ static struct smsc911x_platform_config smsc911x_platdata = { static struct platform_device eth_device = { .name = "smsc911x", - .id = 0, + .id = -1, .dev = { .platform_data = &smsc911x_platdata, }, diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index ee44740..588555a 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -259,9 +259,9 @@ static int sh73a0_set_wake(struct irq_data *data, unsigned int on) return 0; /* always allow wakeup */ } -#define RELOC_BASE 0x1000 +#define RELOC_BASE 0x1200 -/* INTCA IRQ pins at INTCS + 0x1000 to make space for GIC+INTC handling */ +/* INTCA IRQ pins at INTCS + RELOC_BASE to make space for GIC+INTC handling */ #define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE) INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000, diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index c013bbf..53d3d46 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -41,7 +41,6 @@ config MACH_HREFV60 config MACH_SNOWBALL bool "U8500 Snowball platform" select MACH_MOP500 - select LEDS_GPIO help Include support for the snowball development platform. diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c index 9960480..df15646 100644 --- a/arch/arm/mach-ux500/board-mop500-msp.c +++ b/arch/arm/mach-ux500/board-mop500-msp.c @@ -191,9 +191,9 @@ static struct platform_device *db8500_add_msp_i2s(struct device *parent, return pdev; } -/* Platform device for ASoC U8500 machine */ -static struct platform_device snd_soc_u8500 = { - .name = "snd-soc-u8500", +/* Platform device for ASoC MOP500 machine */ +static struct platform_device snd_soc_mop500 = { + .name = "snd-soc-mop500", .id = 0, .dev = { .platform_data = NULL, @@ -227,8 +227,8 @@ int mop500_msp_init(struct device *parent) { struct platform_device *msp1; - pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__); - platform_device_register(&snd_soc_u8500); + pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__); + platform_device_register(&snd_soc_mop500); pr_info("Initialize MSP I2S-devices.\n"); db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 8674a89..a534d88 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -797,6 +797,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); mop500_sdi_init(parent); + mop500_msp_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, @@ -804,6 +805,8 @@ static void __init u8500_init_machine(void) mop500_uib_init(); + } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { + mop500_msp_init(parent); } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) { /* * The HREFv60 board removed a GPIO expander and routed @@ -815,6 +818,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); hrefv60_sdi_init(parent); + mop500_msp_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index 119bc52..4e07eec 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -63,10 +63,11 @@ static int contextidr_notifier(struct notifier_block *unused, unsigned long cmd, pid = task_pid_nr(thread->task) << ASID_BITS; asm volatile( " mrc p15, 0, %0, c13, c0, 1\n" - " bfi %1, %0, #0, %2\n" - " mcr p15, 0, %1, c13, c0, 1\n" + " and %0, %0, %2\n" + " orr %0, %0, %1\n" + " mcr p15, 0, %0, c13, c0, 1\n" : "=r" (contextidr), "+r" (pid) - : "I" (ASID_BITS)); + : "I" (~ASID_MASK)); isb(); return NOTIFY_OK; diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 4e7d118..e59c4ab 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -267,17 +267,19 @@ static void __dma_free_remap(void *cpu_addr, size_t size) vunmap(cpu_addr); } +#define DEFAULT_DMA_COHERENT_POOL_SIZE SZ_256K + struct dma_pool { size_t size; spinlock_t lock; unsigned long *bitmap; unsigned long nr_pages; void *vaddr; - struct page *page; + struct page **pages; }; static struct dma_pool atomic_pool = { - .size = SZ_256K, + .size = DEFAULT_DMA_COHERENT_POOL_SIZE, }; static int __init early_coherent_pool(char *p) @@ -287,6 +289,21 @@ static int __init early_coherent_pool(char *p) } early_param("coherent_pool", early_coherent_pool); +void __init init_dma_coherent_pool_size(unsigned long size) +{ + /* + * Catch any attempt to set the pool size too late. + */ + BUG_ON(atomic_pool.vaddr); + + /* + * Set architecture specific coherent pool size only if + * it has not been changed by kernel command line parameter. + */ + if (atomic_pool.size == DEFAULT_DMA_COHERENT_POOL_SIZE) + atomic_pool.size = size; +} + /* * Initialise the coherent pool for atomic allocations. */ @@ -297,6 +314,7 @@ static int __init atomic_pool_init(void) unsigned long nr_pages = pool->size >> PAGE_SHIFT; unsigned long *bitmap; struct page *page; + struct page **pages; void *ptr; int bitmap_size = BITS_TO_LONGS(nr_pages) * sizeof(long); @@ -304,21 +322,31 @@ static int __init atomic_pool_init(void) if (!bitmap) goto no_bitmap; + pages = kzalloc(nr_pages * sizeof(struct page *), GFP_KERNEL); + if (!pages) + goto no_pages; + if (IS_ENABLED(CONFIG_CMA)) ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page); else ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot, &page, NULL); if (ptr) { + int i; + + for (i = 0; i < nr_pages; i++) + pages[i] = page + i; + spin_lock_init(&pool->lock); pool->vaddr = ptr; - pool->page = page; + pool->pages = pages; pool->bitmap = bitmap; pool->nr_pages = nr_pages; pr_info("DMA: preallocated %u KiB pool for atomic coherent allocations\n", (unsigned)pool->size / 1024); return 0; } +no_pages: kfree(bitmap); no_bitmap: pr_err("DMA: failed to allocate %u KiB pool for atomic coherent allocation\n", @@ -443,27 +471,45 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page) if (pageno < pool->nr_pages) { bitmap_set(pool->bitmap, pageno, count); ptr = pool->vaddr + PAGE_SIZE * pageno; - *ret_page = pool->page + pageno; + *ret_page = pool->pages[pageno]; + } else { + pr_err_once("ERROR: %u KiB atomic DMA coherent pool is too small!\n" + "Please increase it with coherent_pool= kernel parameter!\n", + (unsigned)pool->size / 1024); } spin_unlock_irqrestore(&pool->lock, flags); return ptr; } +static bool __in_atomic_pool(void *start, size_t size) +{ + struct dma_pool *pool = &atomic_pool; + void *end = start + size; + void *pool_start = pool->vaddr; + void *pool_end = pool->vaddr + pool->size; + + if (start < pool_start || start >= pool_end) + return false; + + if (end <= pool_end) + return true; + + WARN(1, "Wrong coherent size(%p-%p) from atomic pool(%p-%p)\n", + start, end - 1, pool_start, pool_end - 1); + + return false; +} + static int __free_from_pool(void *start, size_t size) { struct dma_pool *pool = &atomic_pool; unsigned long pageno, count; unsigned long flags; - if (start < pool->vaddr || start > pool->vaddr + pool->size) + if (!__in_atomic_pool(start, size)) return 0; - if (start + size > pool->vaddr + pool->size) { - WARN(1, "freeing wrong coherent size from pool\n"); - return 0; - } - pageno = (start - pool->vaddr) >> PAGE_SHIFT; count = size >> PAGE_SHIFT; @@ -1090,10 +1136,22 @@ static int __iommu_remove_mapping(struct device *dev, dma_addr_t iova, size_t si return 0; } +static struct page **__atomic_get_pages(void *addr) +{ + struct dma_pool *pool = &atomic_pool; + struct page **pages = pool->pages; + int offs = (addr - pool->vaddr) >> PAGE_SHIFT; + + return pages + offs; +} + static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs) { struct vm_struct *area; + if (__in_atomic_pool(cpu_addr, PAGE_SIZE)) + return __atomic_get_pages(cpu_addr); + if (dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) return cpu_addr; @@ -1103,6 +1161,34 @@ static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs) return NULL; } +static void *__iommu_alloc_atomic(struct device *dev, size_t size, + dma_addr_t *handle) +{ + struct page *page; + void *addr; + + addr = __alloc_from_pool(size, &page); + if (!addr) + return NULL; + + *handle = __iommu_create_mapping(dev, &page, size); + if (*handle == DMA_ERROR_CODE) + goto err_mapping; + + return addr; + +err_mapping: + __free_from_pool(addr, size); + return NULL; +} + +static void __iommu_free_atomic(struct device *dev, struct page **pages, + dma_addr_t handle, size_t size) +{ + __iommu_remove_mapping(dev, handle, size); + __free_from_pool(page_address(pages[0]), size); +} + static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs) { @@ -1113,6 +1199,9 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, *handle = DMA_ERROR_CODE; size = PAGE_ALIGN(size); + if (gfp & GFP_ATOMIC) + return __iommu_alloc_atomic(dev, size, handle); + pages = __iommu_alloc_buffer(dev, size, gfp); if (!pages) return NULL; @@ -1179,6 +1268,11 @@ void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, return; } + if (__in_atomic_pool(cpu_addr, size)) { + __iommu_free_atomic(dev, pages, handle, size); + return; + } + if (!dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) { unmap_kernel_range((unsigned long)cpu_addr, size); vunmap(cpu_addr); diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 6776160..a8ee92d 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -55,6 +55,9 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page /* permanent static mappings from iotable_init() */ #define VM_ARM_STATIC_MAPPING 0x40000000 +/* empty mapping */ +#define VM_ARM_EMPTY_MAPPING 0x20000000 + /* mapping type (attributes) for permanent static mappings */ #define VM_ARM_MTYPE(mt) ((mt) << 20) #define VM_ARM_MTYPE_MASK (0x1f << 20) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4c2d045..c2fa21d 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -807,7 +807,7 @@ static void __init pmd_empty_section_gap(unsigned long addr) vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm)); vm->addr = (void *)addr; vm->size = SECTION_SIZE; - vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING; + vm->flags = VM_IOREMAP | VM_ARM_EMPTY_MAPPING; vm->caller = pmd_empty_section_gap; vm_area_add_early(vm); } @@ -820,7 +820,7 @@ static void __init fill_pmd_gaps(void) /* we're still single threaded hence no lock needed here */ for (vm = vmlist; vm; vm = vm->next) { - if (!(vm->flags & VM_ARM_STATIC_MAPPING)) + if (!(vm->flags & (VM_ARM_STATIC_MAPPING | VM_ARM_EMPTY_MAPPING))) continue; addr = (unsigned long)vm->addr; if (addr < next) @@ -961,8 +961,8 @@ void __init sanity_check_meminfo(void) * Check whether this memory bank would partially overlap * the vmalloc area. */ - if (__va(bank->start + bank->size) > vmalloc_min || - __va(bank->start + bank->size) < __va(bank->start)) { + if (__va(bank->start + bank->size - 1) >= vmalloc_min || + __va(bank->start + bank->size - 1) <= __va(bank->start)) { unsigned long newsize = vmalloc_min - __va(bank->start); printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx " "to -%.8llx (vmalloc region overlap).\n", diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 626ad8c..938b50a 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -189,6 +189,7 @@ struct omap_dm_timer *omap_dm_timer_request(void) timer->reserved = 1; break; } + spin_unlock_irqrestore(&dm_timer_lock, flags); if (timer) { ret = omap_dm_timer_prepare(timer); @@ -197,7 +198,6 @@ struct omap_dm_timer *omap_dm_timer_request(void) timer = NULL; } } - spin_unlock_irqrestore(&dm_timer_lock, flags); if (!timer) pr_debug("%s: timer request failed!\n", __func__); @@ -220,6 +220,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) break; } } + spin_unlock_irqrestore(&dm_timer_lock, flags); if (timer) { ret = omap_dm_timer_prepare(timer); @@ -228,7 +229,6 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) timer = NULL; } } - spin_unlock_irqrestore(&dm_timer_lock, flags); if (!timer) pr_debug("%s: timer%d request failed!\n", __func__, id); @@ -258,7 +258,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable); void omap_dm_timer_disable(struct omap_dm_timer *timer) { - pm_runtime_put(&timer->pdev->dev); + pm_runtime_put_sync(&timer->pdev->dev); } EXPORT_SYMBOL_GPL(omap_dm_timer_disable); diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 68b180e..bb5d08a 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -372,7 +372,8 @@ IS_OMAP_TYPE(3430, 0x3430) #define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \ cpu_is_omap16xx()) #define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ - cpu_is_omap44xx() || soc_is_omap54xx()) + cpu_is_omap44xx() || soc_is_omap54xx() || \ + soc_is_am33xx()) /* Various silicon revisions for omap2 */ #define OMAP242X_CLASS 0x24200024 diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h index 045e320..324d31b 100644 --- a/arch/arm/plat-omap/include/plat/multi.h +++ b/arch/arm/plat-omap/include/plat/multi.h @@ -108,4 +108,13 @@ # endif #endif +#ifdef CONFIG_SOC_AM33XX +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME am33xx +# endif +#endif + #endif /* __PLAT_OMAP_MULTI_H */ diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index b8d19a1..7f7b112 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -110,7 +110,7 @@ static inline void flush(void) _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ AM33XXUART##p) -static inline void __arch_decomp_setup(unsigned long arch_id) +static inline void arch_decomp_setup(void) { int port = 0; @@ -198,8 +198,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id) } while (0); } -#define arch_decomp_setup() __arch_decomp_setup(arch_id) - /* * nothing to do */ diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 766181c..024f3b0 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -68,6 +68,7 @@ static unsigned long omap_sram_start; static void __iomem *omap_sram_base; +static unsigned long omap_sram_skip; static unsigned long omap_sram_size; static void __iomem *omap_sram_ceil; @@ -106,6 +107,7 @@ static int is_sram_locked(void) */ static void __init omap_detect_sram(void) { + omap_sram_skip = SRAM_BOOTLOADER_SZ; if (cpu_class_is_omap2()) { if (is_sram_locked()) { if (cpu_is_omap34xx()) { @@ -113,6 +115,7 @@ static void __init omap_detect_sram(void) if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { omap_sram_size = 0x7000; /* 28K */ + omap_sram_skip += SZ_16K; } else { omap_sram_size = 0x8000; /* 32K */ } @@ -175,8 +178,10 @@ static void __init omap_map_sram(void) return; #ifdef CONFIG_OMAP4_ERRATA_I688 + if (cpu_is_omap44xx()) { omap_sram_start += PAGE_SIZE; omap_sram_size -= SZ_16K; + } #endif if (cpu_is_omap34xx()) { /* @@ -203,8 +208,8 @@ static void __init omap_map_sram(void) * Looks like we need to preserve some bootloader code at the * beginning of SRAM for jumping to flash for reboot to work... */ - memset_io(omap_sram_base + SRAM_BOOTLOADER_SZ, 0, - omap_sram_size - SRAM_BOOTLOADER_SZ); + memset_io(omap_sram_base + omap_sram_skip, 0, + omap_sram_size - omap_sram_skip); } /* @@ -218,7 +223,7 @@ void *omap_sram_push_address(unsigned long size) { unsigned long available, new_ceil = (unsigned long)omap_sram_ceil; - available = omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ); + available = omap_sram_ceil - (omap_sram_base + omap_sram_skip); if (size > available) { pr_err("Not enough space in SRAM\n"); diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index d245a87..b8b747a 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -291,10 +291,12 @@ static struct platform_device orion_ge00 = { void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err) + unsigned long irq_err, + unsigned int tx_csum_limit) { fill_resources(&orion_ge00_shared, orion_ge00_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); + orion_ge00_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge00_shared_data, orion_ge00_resources, irq, &orion_ge00_shared, eth_data, &orion_ge00); @@ -343,10 +345,12 @@ static struct platform_device orion_ge01 = { void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err) + unsigned long irq_err, + unsigned int tx_csum_limit) { fill_resources(&orion_ge01_shared, orion_ge01_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); + orion_ge01_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge01_shared_data, orion_ge01_resources, irq, &orion_ge01_shared, eth_data, &orion_ge01); diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index e00fdb2..ae2377e 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -39,12 +39,14 @@ void __init orion_rtc_init(unsigned long mapbase, void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err); + unsigned long irq_err, + unsigned int tx_csum_limit); void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err); + unsigned long irq_err, + unsigned int tx_csum_limit); void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 28f898f..db98e70 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -430,7 +430,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan) * when necessary. */ -int s3c2410_dma_enqueue(unsigned int channel, void *id, +int s3c2410_dma_enqueue(enum dma_ch channel, void *id, dma_addr_t data, int size) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 74e31ce..fc49f3d 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -32,6 +32,8 @@ #include <linux/platform_data/s3c-hsudc.h> #include <linux/platform_data/s3c-hsotg.h> +#include <media/s5p_hdmi.h> + #include <asm/irq.h> #include <asm/pmu.h> #include <asm/mach/arch.h> @@ -748,7 +750,8 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) if (!pd) { pd = &default_i2c_data; - if (soc_is_exynos4210()) + if (soc_is_exynos4210() || + soc_is_exynos4212() || soc_is_exynos4412()) pd->bus_num = 8; else if (soc_is_s5pv210()) pd->bus_num = 3; @@ -759,6 +762,30 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), &s5p_device_i2c_hdmiphy); } + +struct s5p_hdmi_platform_data s5p_hdmi_def_platdata; + +void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, + struct i2c_board_info *mhl_info, int mhl_bus) +{ + struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata; + + if (soc_is_exynos4210() || + soc_is_exynos4212() || soc_is_exynos4412()) + pd->hdmiphy_bus = 8; + else if (soc_is_s5pv210()) + pd->hdmiphy_bus = 3; + else + pd->hdmiphy_bus = 0; + + pd->hdmiphy_info = hdmiphy_info; + pd->mhl_info = mhl_info; + pd->mhl_bus = mhl_bus; + + s3c_set_platdata(pd, sizeof(struct s5p_hdmi_platform_data), + &s5p_device_hdmi); +} + #endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */ /* I2S */ diff --git a/arch/arm/plat-samsung/include/plat/hdmi.h b/arch/arm/plat-samsung/include/plat/hdmi.h new file mode 100644 index 0000000..331d046 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/hdmi.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2012 Samsung Electronics Co.Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __PLAT_SAMSUNG_HDMI_H +#define __PLAT_SAMSUNG_HDMI_H __FILE__ + +extern void s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, + struct i2c_board_info *mhl_info, int mhl_bus); + +#endif /* __PLAT_SAMSUNG_HDMI_H */ diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 64ab65f..1507028 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -74,7 +74,7 @@ unsigned char pm_uart_udivslot; #ifdef CONFIG_SAMSUNG_PM_DEBUG -struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; +static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save) { |