diff options
Diffstat (limited to 'arch/arm')
54 files changed, 487 insertions, 127 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 49d993c..b519015 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1087,6 +1087,20 @@ if !MMU source "arch/arm/Kconfig-nommu" endif +config PJ4B_ERRATA_4742 + bool "PJ4B Errata 4742: IDLE Wake Up Commands can Cause the CPU Core to Cease Operation" + depends on CPU_PJ4B && MACH_ARMADA_370 + default y + help + When coming out of either a Wait for Interrupt (WFI) or a Wait for + Event (WFE) IDLE states, a specific timing sensitivity exists between + the retiring WFI/WFE instructions and the newly issued subsequent + instructions. This sensitivity can result in a CPU hang scenario. + Workaround: + The software must insert either a Data Synchronization Barrier (DSB) + or Data Memory Barrier (DMB) command immediately after the WFI/WFE + instruction + config ARM_ERRATA_326103 bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory" depends on CPU_V6 @@ -1189,6 +1203,16 @@ config PL310_ERRATA_588369 is not correctly implemented in PL310 as clean lines are not invalidated as a result of these operations. +config ARM_ERRATA_643719 + bool "ARM errata: LoUIS bit field in CLIDR register is incorrect" + depends on CPU_V7 && SMP + help + This option enables the workaround for the 643719 Cortex-A9 (prior to + r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR + register returns zero when it should return one. The workaround + corrects this value, ensuring cache maintenance operations which use + it behave as intended and avoiding data corruption. + config ARM_ERRATA_720789 bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID" depends on CPU_V7 @@ -1528,7 +1552,7 @@ config NR_CPUS config HOTPLUG_CPU bool "Support for hot-pluggable CPUs" - depends on SMP && HOTPLUG + depends on SMP help Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. @@ -2006,7 +2030,7 @@ config XIP_PHYS_ADDR config KEXEC bool "Kexec system call (EXPERIMENTAL)" - depends on (!SMP || HOTPLUG_CPU) + depends on (!SMP || PM_SLEEP_SMP) help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 3580d57..120b83b 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -116,7 +116,8 @@ targets := vmlinux vmlinux.lds \ # Make sure files are removed during clean extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern \ - lib1funcs.S ashldi3.S $(libfdt) $(libfdt_hdrs) + lib1funcs.S ashldi3.S $(libfdt) $(libfdt_hdrs) \ + hyp-stub.S ifeq ($(CONFIG_FUNCTION_TRACER),y) ORIG_CFLAGS := $(KBUILD_CFLAGS) @@ -124,7 +125,7 @@ KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) endif ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj) -asflags-y := -Wa,-march=all -DZIMAGE +asflags-y := -DZIMAGE # Supply kernel BSS size to the decompressor via a linker symbol. KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \ diff --git a/arch/arm/boot/compressed/debug.S b/arch/arm/boot/compressed/debug.S index 6e8382d..5392ee6 100644 --- a/arch/arm/boot/compressed/debug.S +++ b/arch/arm/boot/compressed/debug.S @@ -1,6 +1,8 @@ #include <linux/linkage.h> #include <asm/assembler.h> +#ifndef CONFIG_DEBUG_SEMIHOSTING + #include CONFIG_DEBUG_LL_INCLUDE ENTRY(putc) @@ -10,3 +12,29 @@ ENTRY(putc) busyuart r3, r1 mov pc, lr ENDPROC(putc) + +#else + +ENTRY(putc) + adr r1, 1f + ldmia r1, {r2, r3} + add r2, r2, r1 + ldr r1, [r2, r3] + strb r0, [r1] + mov r0, #0x03 @ SYS_WRITEC + ARM( svc #0x123456 ) + THUMB( svc #0xab ) + mov pc, lr + .align 2 +1: .word _GLOBAL_OFFSET_TABLE_ - . + .word semi_writec_buf(GOT) +ENDPROC(putc) + + .bss + .global semi_writec_buf + .type semi_writec_buf, %object +semi_writec_buf: + .space 4 + .size semi_writec_buf, 4 + +#endif diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S index 6179d94..3115e31 100644 --- a/arch/arm/boot/compressed/head-sa1100.S +++ b/arch/arm/boot/compressed/head-sa1100.S @@ -11,6 +11,7 @@ #include <asm/mach-types.h> .section ".start", "ax" + .arch armv4 __SA1100_start: diff --git a/arch/arm/boot/compressed/head-shark.S b/arch/arm/boot/compressed/head-shark.S index 089c560..92b5689 100644 --- a/arch/arm/boot/compressed/head-shark.S +++ b/arch/arm/boot/compressed/head-shark.S @@ -18,6 +18,7 @@ .section ".start", "ax" + .arch armv4 b __beginning __ofw_data: .long 0 @ the number of memory blocks diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index fe4d9c3..032a8d9 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -11,6 +11,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> + .arch armv7-a /* * Debugging stuff * @@ -805,8 +806,8 @@ call_cache_fn: adr r12, proc_types .align 2 .type proc_types,#object proc_types: - .word 0x00000000 @ old ARM ID - .word 0x0000f000 + .word 0x41000000 @ old ARM ID + .word 0xff00f000 mov pc, lr THUMB( nop ) mov pc, lr diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 1460d9b..8e1248f 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -409,8 +409,8 @@ ti,hwmods = "gpmc"; reg = <0x50000000 0x2000>; interrupts = <100>; - num-cs = <7>; - num-waitpins = <2>; + gpmc,num-cs = <7>; + gpmc,num-waitpins = <2>; #address-cells = <2>; #size-cells = <1>; status = "disabled"; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 3ee63d1..76db557 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -39,8 +39,9 @@ }; soc { - ranges = <0 0 0xd0000000 0x100000 - 0xf0000000 0 0xf0000000 0x1000000>; + ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ + 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ + 0xf0000000 0 0xf0000000 0x1000000 /* Device Bus, NOR 16MiB */>; internal-regs { serial@12000 { diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 46b7850..fdea75c 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -27,8 +27,9 @@ }; soc { - ranges = <0 0 0xd0000000 0x100000 - 0xf0000000 0 0xf0000000 0x8000000>; + ranges = <0 0 0xd0000000 0x100000 /* Internal registers 1MiB */ + 0xe0000000 0 0xe0000000 0x8100000 /* PCIe */ + 0xf0000000 0 0xf0000000 0x8000000 /* Device Bus, NOR 128MiB */>; internal-regs { serial@12000 { diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index d1650fb..ded558b 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -763,7 +763,7 @@ }; }; - pinctrl@03680000 { + pinctrl@03860000 { gpz: gpz { gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 0673524..fc9fb3d 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -161,9 +161,9 @@ interrupts = <0 50 0>; }; - pinctrl_3: pinctrl@03680000 { + pinctrl_3: pinctrl@03860000 { compatible = "samsung,exynos5250-pinctrl"; - reg = <0x0368000 0x1000>; + reg = <0x03860000 0x1000>; interrupts = <0 47 0>; }; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 03bd60d..eeb734e 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -56,9 +56,23 @@ }; }; +&omap4_pmx_wkup { + pinctrl-names = "default"; + pinctrl-0 = < + &twl6030_wkup_pins + >; + + twl6030_wkup_pins: pinmux_twl6030_wkup_pins { + pinctrl-single,pins = < + 0x14 0x2 /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */ + >; + }; +}; + &omap4_pmx_core { pinctrl-names = "default"; pinctrl-0 = < + &twl6030_pins &twl6040_pins &mcpdm_pins &mcbsp1_pins @@ -66,6 +80,12 @@ &tpd12s015_pins >; + twl6030_pins: pinmux_twl6030_pins { + pinctrl-single,pins = < + 0x15e 0x4118 /* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */ + >; + }; + twl6040_pins: pinmux_twl6040_pins { pinctrl-single,pins = < 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index a35d9cd..98505a2 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -142,9 +142,23 @@ }; }; +&omap4_pmx_wkup { + pinctrl-names = "default"; + pinctrl-0 = < + &twl6030_wkup_pins + >; + + twl6030_wkup_pins: pinmux_twl6030_wkup_pins { + pinctrl-single,pins = < + 0x14 0x2 /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */ + >; + }; +}; + &omap4_pmx_core { pinctrl-names = "default"; pinctrl-0 = < + &twl6030_pins &twl6040_pins &mcpdm_pins &dmic_pins @@ -179,6 +193,12 @@ >; }; + twl6030_pins: pinmux_twl6030_pins { + pinctrl-single,pins = < + 0x15e 0x4118 /* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */ + >; + }; + twl6040_pins: pinmux_twl6040_pins { pinctrl-single,pins = < 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 3dd7ff8..635cae2 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -538,6 +538,7 @@ interrupts = <0 41 0x4>; ti,hwmods = "timer5"; ti,timer-dsp; + ti,timer-pwm; }; timer6: timer@4013a000 { @@ -574,6 +575,7 @@ reg = <0x4803e000 0x80>; interrupts = <0 45 0x4>; ti,hwmods = "timer9"; + ti,timer-pwm; }; timer10: timer@48086000 { @@ -581,6 +583,7 @@ reg = <0x48086000 0x80>; interrupts = <0 46 0x4>; ti,hwmods = "timer10"; + ti,timer-pwm; }; timer11: timer@48088000 { diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index a573b94..c12af78 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -449,7 +449,11 @@ usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */ + }; + + usb-phy@c5004000 { + nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */ }; sdhci@c8000600 { diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index e7d5de4..ec52937 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -428,17 +428,26 @@ status = "okay"; }; + usb-phy@c5000000 { + status = "okay"; + }; + usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */ + }; + + usb-phy@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */ }; usb@c5008000 { status = "okay"; }; - usb-phy@c5004400 { - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + usb-phy@c5008000 { + status = "okay"; }; sdhci@c8000200 { diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts b/arch/arm/boot/dts/tegra20-iris-512.dts index 52f1103..9f64f70 100644 --- a/arch/arm/boot/dts/tegra20-iris-512.dts +++ b/arch/arm/boot/dts/tegra20-iris-512.dts @@ -38,13 +38,20 @@ usb@c5000000 { status = "okay"; - dr_mode = "otg"; + }; + + usb-phy@c5000000 { + status = "okay"; }; usb@c5008000 { status = "okay"; }; + usb-phy@c5008000 { + status = "okay"; + }; + serial@70006000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index e3e0c99..1c17ffa 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -427,17 +427,26 @@ status = "okay"; }; + usb-phy@c5000000 { + status = "okay"; + }; + usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ + nvidia,phy-reset-gpio = <&gpio 168 1>; /* gpio PV0, active low */ + }; + + usb-phy@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio 168 1>; /* gpio PV0, active low */ }; usb@c5008000 { status = "okay"; }; - usb-phy@c5004400 { - nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ + usb-phy@c5008000 { + status = "okay"; }; sdhci@c8000000 { diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index cee4c34..009dafe 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -569,17 +569,28 @@ dr_mode = "otg"; }; + usb-phy@c5000000 { + status = "okay"; + vbus-supply = <&vbus_reg>; + dr_mode = "otg"; + }; + usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */ + }; + + usb-phy@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */ }; usb@c5008000 { status = "okay"; }; - usb-phy@c5004400 { - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + usb-phy@c5008000 { + status = "okay"; }; sdhci@c8000000 { @@ -807,6 +818,15 @@ gpio = <&pmic 1 0>; enable-active-high; }; + + vbus_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "vdd_vbus_wup1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 24 0>; /* PD0 */ + }; }; sound { diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 50b3ec1..fc2f7d6 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -470,6 +470,10 @@ status = "okay"; }; + usb-phy@c5008000 { + status = "okay"; + }; + sdhci@c8000600 { cd-gpios = <&gpio 58 1>; /* gpio PH2 */ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 9cc78a1..0e65c00 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -314,17 +314,27 @@ nvidia,vbus-gpio = <&gpio 170 0>; /* gpio PV2 */ }; + usb-phy@c5000000 { + status = "okay"; + vbus-supply = <&vbus_reg>; + }; + usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ + nvidia,phy-reset-gpio = <&gpio 168 1>; /* gpio PV0, active low */ + }; + + usb-phy@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio 168 1>; /* gpio PV0, active low */ }; usb@c5008000 { status = "okay"; }; - usb-phy@c5004400 { - nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ + usb-phy@c5008000 { + status = "okay"; }; sdhci@c8000000 { @@ -390,6 +400,15 @@ regulator-max-microvolt = <1800000>; regulator-always-on; }; + + vbus_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 170 0>; /* PV2 */ + }; }; sound { diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index dd38f1f..e00f89e 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -505,17 +505,26 @@ status = "okay"; }; + usb-phy@c5000000 { + status = "okay"; + }; + usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */ + }; + + usb-phy@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio 169 1>; /* gpio PV1, active low */ }; usb@c5008000 { status = "okay"; }; - usb-phy@c5004400 { - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + usb-phy@c5008000 { + status = "okay"; }; sdhci@c8000000 { diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index d2567f8..3c24c9b 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -511,11 +511,21 @@ nvidia,vbus-gpio = <&tca6416 0 0>; /* GPIO_PMU0 */ }; + usb-phy@c5000000 { + status = "okay"; + vbus-supply = <&vbus1_reg>; + }; + usb@c5008000 { status = "okay"; nvidia,vbus-gpio = <&tca6416 1 0>; /* GPIO_PMU1 */ }; + usb-phy@c5008000 { + status = "okay"; + vbus-supply = <&vbus3_reg>; + }; + sdhci@c8000400 { status = "okay"; cd-gpios = <&gpio 69 1>; /* gpio PI5 */ @@ -568,6 +578,24 @@ regulator-max-microvolt = <5000000>; regulator-always-on; }; + + vbus1_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "vbus1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&tca6416 0 0>; /* GPIO_PMU0 */ + }; + + vbus3_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "vbus3"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&tca6416 1 0>; /* GPIO_PMU1 */ + }; }; sound { diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 56a9110..96d6d8a 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -455,13 +455,24 @@ status = "disabled"; }; - phy1: usb-phy@c5000400 { + phy1: usb-phy@c5000000 { compatible = "nvidia,tegra20-usb-phy"; - reg = <0xc5000400 0x3c00>; + reg = <0xc5000000 0x4000 0xc5000000 0x4000>; phy_type = "utmi"; + clocks = <&tegra_car 22>, + <&tegra_car 127>, + <&tegra_car 106>, + <&tegra_car 22>; + clock-names = "reg", "pll_u", "timer", "utmi-pads"; nvidia,has-legacy-mode; - clocks = <&tegra_car 22>, <&tegra_car 127>; - clock-names = "phy", "pll_u"; + hssync_start_delay = <9>; + idle_wait_delay = <17>; + elastic_limit = <16>; + term_range_adj = <6>; + xcvr_setup = <9>; + xcvr_lsfslew = <1>; + xcvr_lsrslew = <1>; + status = "disabled"; }; usb@c5004000 { @@ -474,12 +485,15 @@ status = "disabled"; }; - phy2: usb-phy@c5004400 { + phy2: usb-phy@c5004000 { compatible = "nvidia,tegra20-usb-phy"; - reg = <0xc5004400 0x3c00>; + reg = <0xc5004000 0x4000>; phy_type = "ulpi"; - clocks = <&tegra_car 93>, <&tegra_car 127>; - clock-names = "phy", "pll_u"; + clocks = <&tegra_car 58>, + <&tegra_car 127>, + <&tegra_car 93>; + clock-names = "reg", "pll_u", "ulpi-link"; + status = "disabled"; }; usb@c5008000 { @@ -492,12 +506,23 @@ status = "disabled"; }; - phy3: usb-phy@c5008400 { + phy3: usb-phy@c5008000 { compatible = "nvidia,tegra20-usb-phy"; - reg = <0xc5008400 0x3c00>; + reg = <0xc5008000 0x4000 0xc5000000 0x4000>; phy_type = "utmi"; - clocks = <&tegra_car 22>, <&tegra_car 127>; - clock-names = "phy", "pll_u"; + clocks = <&tegra_car 59>, + <&tegra_car 127>, + <&tegra_car 106>, + <&tegra_car 22>; + clock-names = "reg", "pll_u", "timer", "utmi-pads"; + hssync_start_delay = <9>; + idle_wait_delay = <17>; + elastic_limit = <16>; + term_range_adj = <6>; + xcvr_setup = <9>; + xcvr_lsfslew = <2>; + xcvr_lsrslew = <2>; + status = "disabled"; }; sdhci@c8000000 { diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index bff7138..17d0ae8 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -320,9 +320,7 @@ static inline void flush_anon_page(struct vm_area_struct *vma, } #define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE -static inline void flush_kernel_dcache_page(struct page *page) -{ -} +extern void flush_kernel_dcache_page(struct page *); #define flush_dcache_mmap_lock(mapping) \ spin_lock_irq(&(mapping)->tree_lock) diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index 7652712..dba62cb 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -32,6 +32,8 @@ #define MPIDR_HWID_BITMASK 0xFFFFFF +#define MPIDR_INVALID (~MPIDR_HWID_BITMASK) + #define MPIDR_LEVEL_BITS 8 #define MPIDR_LEVEL_MASK ((1 << MPIDR_LEVEL_BITS) - 1) diff --git a/arch/arm/include/asm/glue-proc.h b/arch/arm/include/asm/glue-proc.h index ac1dd54..8017e94 100644 --- a/arch/arm/include/asm/glue-proc.h +++ b/arch/arm/include/asm/glue-proc.h @@ -230,6 +230,15 @@ # endif #endif +#ifdef CONFIG_CPU_PJ4B +# ifdef CPU_NAME +# undef MULTI_CPU +# define MULTI_CPU +# else +# define CPU_NAME cpu_pj4b +# endif +#endif + #ifndef MULTI_CPU #define cpu_proc_init __glue(CPU_NAME,_proc_init) #define cpu_proc_fin __glue(CPU_NAME,_proc_fin) diff --git a/arch/arm/include/asm/percpu.h b/arch/arm/include/asm/percpu.h index 968c0a1..209e650 100644 --- a/arch/arm/include/asm/percpu.h +++ b/arch/arm/include/asm/percpu.h @@ -30,8 +30,15 @@ static inline void set_my_cpu_offset(unsigned long off) static inline unsigned long __my_cpu_offset(void) { unsigned long off; - /* Read TPIDRPRW */ - asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off) : : "memory"); + register unsigned long *sp asm ("sp"); + + /* + * Read TPIDRPRW. + * We want to allow caching the value, so avoid using volatile and + * instead use a fake stack read to hazard against barrier(). + */ + asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off) : "Q" (*sp)); + return off; } #define __my_cpu_offset __my_cpu_offset() diff --git a/arch/arm/include/asm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h index 7ec60d60..0642228 100644 --- a/arch/arm/include/asm/pgtable-nommu.h +++ b/arch/arm/include/asm/pgtable-nommu.h @@ -79,8 +79,6 @@ extern unsigned int kobjsize(const void *objp); * No page table caches to initialise. */ #define pgtable_cache_init() do { } while (0) -#define io_remap_pfn_range remap_pfn_range - /* * All 32bit addresses are effectively valid for vmalloc... diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 9bcd262..229e0dd 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -318,13 +318,6 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) #define HAVE_ARCH_UNMAPPED_AREA #define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN -/* - * remap a physical page `pfn' of size `size' with page protection `prot' - * into virtual address `from' - */ -#define io_remap_pfn_range(vma,from,pfn,size,prot) \ - remap_pfn_range(vma, from, pfn, size, prot) - #define pgtable_cache_init() do { } while (0) #endif /* !__ASSEMBLY__ */ diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h index aaa61b6..e789832 100644 --- a/arch/arm/include/asm/smp_plat.h +++ b/arch/arm/include/asm/smp_plat.h @@ -49,7 +49,7 @@ static inline int cache_ops_need_broadcast(void) /* * Logical CPU mapping. */ -extern int __cpu_logical_map[]; +extern u32 __cpu_logical_map[]; #define cpu_logical_map(cpu) __cpu_logical_map[cpu] /* * Retrieve logical cpu index corresponding to a given MPIDR[23:0] diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index 5af04f6..5859c8b 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -82,7 +82,7 @@ void __init arm_dt_init_cpu_maps(void) u32 i, j, cpuidx = 1; u32 mpidr = is_smp() ? read_cpuid_mpidr() & MPIDR_HWID_BITMASK : 0; - u32 tmp_map[NR_CPUS] = { [0 ... NR_CPUS-1] = UINT_MAX }; + u32 tmp_map[NR_CPUS] = { [0 ... NR_CPUS-1] = MPIDR_INVALID }; bool bootcpu_valid = false; cpus = of_find_node_by_path("/cpus"); @@ -92,6 +92,9 @@ void __init arm_dt_init_cpu_maps(void) for_each_child_of_node(cpus, cpu) { u32 hwid; + if (of_node_cmp(cpu->type, "cpu")) + continue; + pr_debug(" * %s...\n", cpu->full_name); /* * A device tree containing CPU nodes with missing "reg" @@ -149,9 +152,10 @@ void __init arm_dt_init_cpu_maps(void) tmp_map[i] = hwid; } - if (WARN(!bootcpu_valid, "DT missing boot CPU MPIDR[23:0], " - "fall back to default cpu_logical_map\n")) + if (!bootcpu_valid) { + pr_warn("DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map\n"); return; + } /* * Since the boot CPU node contains proper data, and all nodes have diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 8ef8c93..4fb074c 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -134,6 +134,10 @@ void machine_kexec(struct kimage *image) unsigned long reboot_code_buffer_phys; void *reboot_code_buffer; + if (num_online_cpus() > 1) { + pr_err("kexec: error: multiple CPUs still online\n"); + return; + } page_list = image->head & PAGE_MASK; diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 1e9be5d..85c3fb6 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -288,24 +288,16 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, if (strcmp(".ARM.exidx.init.text", secname) == 0) maps[ARM_SEC_INIT].unw_sec = s; - else if (strcmp(".ARM.exidx.devinit.text", secname) == 0) - maps[ARM_SEC_DEVINIT].unw_sec = s; else if (strcmp(".ARM.exidx", secname) == 0) maps[ARM_SEC_CORE].unw_sec = s; else if (strcmp(".ARM.exidx.exit.text", secname) == 0) maps[ARM_SEC_EXIT].unw_sec = s; - else if (strcmp(".ARM.exidx.devexit.text", secname) == 0) - maps[ARM_SEC_DEVEXIT].unw_sec = s; else if (strcmp(".init.text", secname) == 0) maps[ARM_SEC_INIT].txt_sec = s; - else if (strcmp(".devinit.text", secname) == 0) - maps[ARM_SEC_DEVINIT].txt_sec = s; else if (strcmp(".text", secname) == 0) maps[ARM_SEC_CORE].txt_sec = s; else if (strcmp(".exit.text", secname) == 0) maps[ARM_SEC_EXIT].txt_sec = s; - else if (strcmp(".devexit.text", secname) == 0) - maps[ARM_SEC_DEVEXIT].txt_sec = s; } for (i = 0; i < ARM_SEC_MAX; i++) diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 282de48..6e8931c 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -184,30 +184,61 @@ int __init reboot_setup(char *str) __setup("reboot=", reboot_setup); +/* + * Called by kexec, immediately prior to machine_kexec(). + * + * This must completely disable all secondary CPUs; simply causing those CPUs + * to execute e.g. a RAM-based pin loop is not sufficient. This allows the + * kexec'd kernel to use any and all RAM as it sees fit, without having to + * avoid any code or data used by any SW CPU pin loop. The CPU hotplug + * functionality embodied in disable_nonboot_cpus() to achieve this. + */ void machine_shutdown(void) { -#ifdef CONFIG_SMP - smp_send_stop(); -#endif + disable_nonboot_cpus(); } +/* + * Halting simply requires that the secondary CPUs stop performing any + * activity (executing tasks, handling interrupts). smp_send_stop() + * achieves this. + */ void machine_halt(void) { - machine_shutdown(); + smp_send_stop(); + local_irq_disable(); while (1); } +/* + * Power-off simply requires that the secondary CPUs stop performing any + * activity (executing tasks, handling interrupts). smp_send_stop() + * achieves this. When the system power is turned off, it will take all CPUs + * with it. + */ void machine_power_off(void) { - machine_shutdown(); + smp_send_stop(); + if (pm_power_off) pm_power_off(); } +/* + * Restart requires that the secondary CPUs stop performing any activity + * while the primary CPU resets the system. Systems with a single CPU can + * use soft_restart() as their machine descriptor's .restart hook, since that + * will cause the only available CPU to reset. Systems with multiple CPUs must + * provide a HW restart implementation, to ensure that all CPUs reset at once. + * This is required so that any code running after reset on the primary CPU + * doesn't have to co-ordinate with other CPUs to ensure they aren't still + * executing pre-reset code, and using RAM that the primary CPU's code wishes + * to use. Implementing such co-ordination would be essentially impossible. + */ void machine_restart(char *cmd) { - machine_shutdown(); + smp_send_stop(); arm_pm_restart(reboot_mode, cmd); diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 1522c7a..b4b1d39 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -444,7 +444,7 @@ void notrace cpu_init(void) : "r14"); } -int __cpu_logical_map[NR_CPUS]; +u32 __cpu_logical_map[NR_CPUS] = { [0 ... NR_CPUS-1] = MPIDR_INVALID }; void __init smp_setup_processor_id(void) { diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 550d63c..5919eb4 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -651,17 +651,6 @@ void smp_send_reschedule(int cpu) smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE); } -#ifdef CONFIG_HOTPLUG_CPU -static void smp_kill_cpus(cpumask_t *mask) -{ - unsigned int cpu; - for_each_cpu(cpu, mask) - platform_cpu_kill(cpu); -} -#else -static void smp_kill_cpus(cpumask_t *mask) { } -#endif - void smp_send_stop(void) { unsigned long timeout; @@ -679,8 +668,6 @@ void smp_send_stop(void) if (num_online_cpus() > 1) pr_warning("SMP: failed to stop secondary CPUs\n"); - - smp_kill_cpus(&mask); } /* diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index f10316b..c5a5954 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -13,6 +13,7 @@ #include <linux/cpu.h> #include <linux/cpumask.h> +#include <linux/export.h> #include <linux/init.h> #include <linux/percpu.h> #include <linux/node.h> @@ -200,6 +201,7 @@ static inline void update_cpu_power(unsigned int cpuid, unsigned int mpidr) {} * cpu topology table */ struct cputopo_arm cpu_topology[NR_CPUS]; +EXPORT_SYMBOL_GPL(cpu_topology); const struct cpumask *cpu_coregroup_mask(int cpu) { diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index a871b8e..fa25e4e 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -70,10 +70,6 @@ SECTIONS ARM_EXIT_DISCARD(EXIT_TEXT) ARM_EXIT_DISCARD(EXIT_DATA) EXIT_CALL -#ifndef CONFIG_HOTPLUG - *(.ARM.exidx.devexit.text) - *(.ARM.extab.devexit.text) -#endif #ifndef CONFIG_MMU *(.fixup) *(__ex_table) diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 73a2d90..30e1ebe 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -235,7 +235,6 @@ config IXP4XX_QMGR config IXP4XX_NPE tristate "IXP4xx Network Processor Engine support" select FW_LOADER - select HOTPLUG help This driver supports IXP4xx built-in network coprocessors and is automatically selected by Ethernet and HSS drivers. diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c index 827cde4..e96fd71 100644 --- a/arch/arm/mach-kirkwood/mpp.c +++ b/arch/arm/mach-kirkwood/mpp.c @@ -22,9 +22,10 @@ static unsigned int __init kirkwood_variant(void) kirkwood_pcie_id(&dev, &rev); - if ((dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0) || - (dev == MV88F6282_DEV_ID)) + if (dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0) return MPP_F6281_MASK; + if (dev == MV88F6282_DEV_ID) + return MPP_F6282_MASK; if (dev == MV88F6192_DEV_ID && rev >= MV88F6192_REV_A0) return MPP_F6192_MASK; if (dev == MV88F6180_DEV_ID) diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c index 8f3bf4e..bbd6a3f 100644 --- a/arch/arm/mach-omap2/clock36xx.c +++ b/arch/arm/mach-omap2/clock36xx.c @@ -20,11 +20,12 @@ #include <linux/kernel.h> #include <linux/clk.h> +#include <linux/clk-provider.h> #include <linux/io.h> #include "clock.h" #include "clock36xx.h" - +#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw) /** * omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering @@ -39,29 +40,28 @@ */ int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk) { - struct clk_hw_omap *parent; + struct clk_divider *parent; struct clk_hw *parent_hw; - u32 dummy_v, orig_v, clksel_shift; + u32 dummy_v, orig_v; int ret; /* Clear PWRDN bit of HSDIVIDER */ ret = omap2_dflt_clk_enable(clk); parent_hw = __clk_get_hw(__clk_get_parent(clk->clk)); - parent = to_clk_hw_omap(parent_hw); + parent = to_clk_divider(parent_hw); /* Restore the dividers */ if (!ret) { - clksel_shift = __ffs(parent->clksel_mask); - orig_v = __raw_readl(parent->clksel_reg); + orig_v = __raw_readl(parent->reg); dummy_v = orig_v; /* Write any other value different from the Read value */ - dummy_v ^= (1 << clksel_shift); - __raw_writel(dummy_v, parent->clksel_reg); + dummy_v ^= (1 << parent->shift); + __raw_writel(dummy_v, parent->reg); /* Write the original divider */ - __raw_writel(orig_v, parent->clksel_reg); + __raw_writel(orig_v, parent->reg); } return ret; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 075f7cc..69337af 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -2007,6 +2007,13 @@ static struct omap_hwmod am33xx_uart1_hwmod = { }, }; +/* uart2 */ +static struct omap_hwmod_dma_info uart2_edma_reqs[] = { + { .name = "tx", .dma_req = 28, }, + { .name = "rx", .dma_req = 29, }, + { .dma_req = -1 } +}; + static struct omap_hwmod_irq_info am33xx_uart2_irqs[] = { { .irq = 73 + OMAP_INTC_START, }, { .irq = -1 }, @@ -2018,7 +2025,7 @@ static struct omap_hwmod am33xx_uart2_hwmod = { .clkdm_name = "l4ls_clkdm", .flags = HWMOD_SWSUP_SIDLE_ACT, .mpu_irqs = am33xx_uart2_irqs, - .sdma_reqs = uart1_edma_reqs, + .sdma_reqs = uart2_edma_reqs, .main_clk = "dpll_per_m2_div4_ck", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index c018593..5a2d803 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -546,8 +546,10 @@ static void __init prcm_setup_regs(void) /* Clear any pending PRCM interrupts */ omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); - if (omap3_has_iva()) - omap3_iva_idle(); + /* + * We need to idle iva2_pwrdm even on am3703 with no iva2. + */ + omap3_iva_idle(); omap3_d2d_idle(); } diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c index f7e347e..02cc3438 100644 --- a/arch/arm/mach-prima2/pm.c +++ b/arch/arm/mach-prima2/pm.c @@ -101,8 +101,10 @@ static int __init sirfsoc_of_pwrc_init(void) struct device_node *np; np = of_find_matching_node(NULL, pwrc_ids); - if (!np) - panic("unable to find compatible pwrc node in dtb\n"); + if (!np) { + pr_err("unable to find compatible sirf pwrc node in dtb\n"); + return -ENOENT; + } /* * pwrc behind rtciobrg is not located in memory space diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c index 435019c..d5e0cbc 100644 --- a/arch/arm/mach-prima2/rstc.c +++ b/arch/arm/mach-prima2/rstc.c @@ -28,8 +28,10 @@ static int __init sirfsoc_of_rstc_init(void) struct device_node *np; np = of_find_matching_node(NULL, rstc_ids); - if (!np) - panic("unable to find compatible rstc node in dtb\n"); + if (!np) { + pr_err("unable to find compatible sirf rstc node in dtb\n"); + return -ENOENT; + } sirfsoc_rstc_base = of_iomap(np, 0); if (!sirfsoc_rstc_base) diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 15451ee..515b000 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -92,6 +92,14 @@ ENTRY(v7_flush_dcache_louis) mrc p15, 1, r0, c0, c0, 1 @ read clidr, r0 = clidr ALT_SMP(ands r3, r0, #(7 << 21)) @ extract LoUIS from clidr ALT_UP(ands r3, r0, #(7 << 27)) @ extract LoUU from clidr +#ifdef CONFIG_ARM_ERRATA_643719 + ALT_SMP(mrceq p15, 0, r2, c0, c0, 0) @ read main ID register + ALT_UP(moveq pc, lr) @ LoUU is zero, so nothing to do + ldreq r1, =0x410fc090 @ ID of ARM Cortex A9 r0p? + biceq r2, r2, #0x0000000f @ clear minor revision number + teqeq r2, r1 @ test for errata affected core and if so... + orreqs r3, #(1 << 21) @ fix LoUIS value (and set flags state to 'ne') +#endif ALT_SMP(mov r3, r3, lsr #20) @ r3 = LoUIS * 2 ALT_UP(mov r3, r3, lsr #26) @ r3 = LoUU * 2 moveq pc, lr @ return if level == 0 diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 0d473cc..32aa586 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -301,6 +301,39 @@ void flush_dcache_page(struct page *page) EXPORT_SYMBOL(flush_dcache_page); /* + * Ensure cache coherency for the kernel mapping of this page. We can + * assume that the page is pinned via kmap. + * + * If the page only exists in the page cache and there are no user + * space mappings, this is a no-op since the page was already marked + * dirty at creation. Otherwise, we need to flush the dirty kernel + * cache lines directly. + */ +void flush_kernel_dcache_page(struct page *page) +{ + if (cache_is_vivt() || cache_is_vipt_aliasing()) { + struct address_space *mapping; + + mapping = page_mapping(page); + + if (!mapping || mapping_mapped(mapping)) { + void *addr; + + addr = page_address(page); + /* + * kmap_atomic() doesn't set the page virtual + * address for highmem pages, and + * kunmap_atomic() takes care of cache + * flushing already. + */ + if (!IS_ENABLED(CONFIG_HIGHMEM) || addr) + __cpuc_flush_dcache_area(addr, PAGE_SIZE); + } + } +} +EXPORT_SYMBOL(flush_kernel_dcache_page); + +/* * Flush an anonymous page so that users of get_user_pages() * can safely access the data. The expected sequence is: * diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index e0d8565..4d409e6 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -616,10 +616,12 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, } while (pte++, addr += PAGE_SIZE, addr != end); } -static void __init map_init_section(pmd_t *pmd, unsigned long addr, +static void __init __map_init_section(pmd_t *pmd, unsigned long addr, unsigned long end, phys_addr_t phys, const struct mem_type *type) { + pmd_t *p = pmd; + #ifndef CONFIG_ARM_LPAE /* * In classic MMU format, puds and pmds are folded in to @@ -638,7 +640,7 @@ static void __init map_init_section(pmd_t *pmd, unsigned long addr, phys += SECTION_SIZE; } while (pmd++, addr += SECTION_SIZE, addr != end); - flush_pmd_entry(pmd); + flush_pmd_entry(p); } static void __init alloc_init_pmd(pud_t *pud, unsigned long addr, @@ -661,7 +663,7 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr, */ if (type->prot_sect && ((addr | next | phys) & ~SECTION_MASK) == 0) { - map_init_section(pmd, addr, next, phys, type); + __map_init_section(pmd, addr, next, phys, type); } else { alloc_init_pte(pmd, addr, next, __phys_to_pfn(phys), type); diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index d51225f..eb5293a 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -57,6 +57,12 @@ void flush_dcache_page(struct page *page) } EXPORT_SYMBOL(flush_dcache_page); +void flush_kernel_dcache_page(struct page *page) +{ + __cpuc_flush_dcache_area(page_address(page), PAGE_SIZE); +} +EXPORT_SYMBOL(flush_kernel_dcache_page); + void copy_to_user_page(struct vm_area_struct *vma, struct page *page, unsigned long uaddr, void *dst, const void *src, unsigned long len) diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S index d217e97..aaeb6c1 100644 --- a/arch/arm/mm/proc-fa526.S +++ b/arch/arm/mm/proc-fa526.S @@ -81,7 +81,6 @@ ENDPROC(cpu_fa526_reset) */ .align 4 ENTRY(cpu_fa526_do_idle) - mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt mov pc, lr diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index f9a0aa7..e3c48a3 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -333,3 +333,8 @@ ENTRY(\name\()_tlb_fns) .endif .size \name\()_tlb_fns, . - \name\()_tlb_fns .endm + +.macro globl_equ x, y + .globl \x + .equ \x, \y +.endm diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 2c73a73..e35fec3 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -140,6 +140,29 @@ ENTRY(cpu_v7_do_resume) ENDPROC(cpu_v7_do_resume) #endif +#ifdef CONFIG_CPU_PJ4B + globl_equ cpu_pj4b_switch_mm, cpu_v7_switch_mm + globl_equ cpu_pj4b_set_pte_ext, cpu_v7_set_pte_ext + globl_equ cpu_pj4b_proc_init, cpu_v7_proc_init + globl_equ cpu_pj4b_proc_fin, cpu_v7_proc_fin + globl_equ cpu_pj4b_reset, cpu_v7_reset +#ifdef CONFIG_PJ4B_ERRATA_4742 +ENTRY(cpu_pj4b_do_idle) + dsb @ WFI may enter a low-power mode + wfi + dsb @barrier + mov pc, lr +ENDPROC(cpu_pj4b_do_idle) +#else + globl_equ cpu_pj4b_do_idle, cpu_v7_do_idle +#endif + globl_equ cpu_pj4b_dcache_clean_area, cpu_v7_dcache_clean_area + globl_equ cpu_pj4b_do_suspend, cpu_v7_do_suspend + globl_equ cpu_pj4b_do_resume, cpu_v7_do_resume + globl_equ cpu_pj4b_suspend_size, cpu_v7_suspend_size + +#endif + __CPUINIT /* @@ -350,6 +373,9 @@ __v7_setup_stack: @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) define_processor_functions v7, dabort=v7_early_abort, pabort=v7_pabort, suspend=1 +#ifdef CONFIG_CPU_PJ4B + define_processor_functions pj4b, dabort=v7_early_abort, pabort=v7_pabort, suspend=1 +#endif .section ".rodata" @@ -362,7 +388,7 @@ __v7_setup_stack: /* * Standard v7 proc info content */ -.macro __v7_proc initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0 +.macro __v7_proc initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0, proc_fns = v7_processor_functions ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \ PMD_SECT_AF | PMD_FLAGS_SMP | \mm_mmuflags) ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \ @@ -375,7 +401,7 @@ __v7_setup_stack: .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_FAST_MULT | \ HWCAP_EDSP | HWCAP_TLS | \hwcaps .long cpu_v7_name - .long v7_processor_functions + .long \proc_fns .long v7wbi_tlb_fns .long v6_user_fns .long v7_cache_fns @@ -407,12 +433,14 @@ __v7_ca9mp_proc_info: /* * Marvell PJ4B processor. */ +#ifdef CONFIG_CPU_PJ4B .type __v7_pj4b_proc_info, #object __v7_pj4b_proc_info: - .long 0x562f5840 - .long 0xfffffff0 - __v7_proc __v7_pj4b_setup + .long 0x560f5800 + .long 0xff0fff00 + __v7_proc __v7_pj4b_setup, proc_fns = pj4b_processor_functions .size __v7_pj4b_proc_info, . - __v7_pj4b_proc_info +#endif /* * ARM Ltd. Cortex A7 processor. diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 53210ec..bd7124c 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -16,6 +16,7 @@ #include <linux/suspend.h> #include <linux/errno.h> #include <linux/delay.h> +#include <linux/of.h> #include <linux/serial_core.h> #include <linux/io.h> @@ -261,7 +262,8 @@ static int s3c_pm_enter(suspend_state_t state) * require a full power-cycle) */ - if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) && + if (!of_have_populated_dt() && + !any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) && !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) { printk(KERN_ERR "%s: No wake-up sources!\n", __func__); printk(KERN_ERR "%s: Aborting sleep\n", __func__); @@ -270,8 +272,11 @@ static int s3c_pm_enter(suspend_state_t state) /* save all necessary core registers not covered by the drivers */ - samsung_pm_save_gpios(); - samsung_pm_saved_gpios(); + if (!of_have_populated_dt()) { + samsung_pm_save_gpios(); + samsung_pm_saved_gpios(); + } + s3c_pm_save_uarts(); s3c_pm_save_core(); @@ -310,8 +315,11 @@ static int s3c_pm_enter(suspend_state_t state) s3c_pm_restore_core(); s3c_pm_restore_uarts(); - samsung_pm_restore_gpios(); - s3c_pm_restored_gpios(); + + if (!of_have_populated_dt()) { + samsung_pm_restore_gpios(); + s3c_pm_restored_gpios(); + } s3c_pm_debug_init(); |
