summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/boot/bootp/init.S2
-rw-r--r--arch/arm/common/clkdev.c2
-rw-r--r--arch/arm/mach-at91/include/mach/at91_mci.h2
-rw-r--r--arch/arm/mach-davinci/include/mach/i2c.h2
-rw-r--r--arch/arm/mach-ep93xx/micro9.c2
-rw-r--r--arch/arm/mach-nomadik/board-nhk8815.c2
-rw-r--r--[-rwxr-xr-x]arch/arm/mach-omap2/board-3630sdp.c0
-rw-r--r--[-rwxr-xr-x]arch/arm/mach-omap2/board-zoom-peripherals.c0
-rw-r--r--arch/arm/mach-s3c2410/include/mach/spi-gpio.h2
-rw-r--r--arch/arm/mach-s5pc100/setup-sdhci.c4
-rw-r--r--arch/arm/mach-u300/core.c4
-rw-r--r--arch/arm/mach-u300/include/mach/debug-macro.S2
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h2
-rw-r--r--arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h2
-rw-r--r--arch/arm/plat-samsung/include/plat/nand.h2
-rw-r--r--arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h2
16 files changed, 16 insertions, 16 deletions
diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S
index df7bc70..8b0de41 100644
--- a/arch/arm/boot/bootp/init.S
+++ b/arch/arm/boot/bootp/init.S
@@ -49,7 +49,7 @@ _start: add lr, pc, #-0x8 @ lr = current load addr
/*
* find the end of the tag list, and then add an INITRD tag on the end.
* If there is already an INITRD tag, then we ignore it; the last INITRD
- * tag takes precidence.
+ * tag takes precedence.
*/
taglist: ldr r10, [r9, #0] @ tag length
teq r10, #0 @ last tag (zero length)?
diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c
index 446b696..6416d5b 100644
--- a/arch/arm/common/clkdev.c
+++ b/arch/arm/common/clkdev.c
@@ -32,7 +32,7 @@ static DEFINE_MUTEX(clocks_mutex);
* If an entry has a device ID, it must match
* If an entry has a connection ID, it must match
* Then we take the most specific entry - with the following
- * order of precidence: dev+con > dev only > con only.
+ * order of precedence: dev+con > dev only > con only.
*/
static struct clk *clk_find(const char *dev_id, const char *con_id)
{
diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h
index 550d503..57f8ee1 100644
--- a/arch/arm/mach-at91/include/mach/at91_mci.h
+++ b/arch/arm/mach-at91/include/mach/at91_mci.h
@@ -77,7 +77,7 @@
#define AT91_MCI_BLKR 0x18 /* Block Register */
#define AT91_MCI_BLKR_BCNT(n) ((0xffff & (n)) << 0) /* Block count */
-#define AT91_MCI_BLKR_BLKLEN(n) ((0xffff & (n)) << 16) /* Block lenght */
+#define AT91_MCI_BLKR_BLKLEN(n) ((0xffff & (n)) << 16) /* Block length */
#define AT91_MCI_RSPR(n) (0x20 + ((n) * 4)) /* Response Registers 0-3 */
#define AT91_MCR_RDR 0x30 /* Receive Data Register */
diff --git a/arch/arm/mach-davinci/include/mach/i2c.h b/arch/arm/mach-davinci/include/mach/i2c.h
index 39fdcea..2312d19 100644
--- a/arch/arm/mach-davinci/include/mach/i2c.h
+++ b/arch/arm/mach-davinci/include/mach/i2c.h
@@ -1,5 +1,5 @@
/*
- * DaVinci I2C controller platfrom_device info
+ * DaVinci I2C controller platform_device info
*
* Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
*
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index f3757a1..c33360e8 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -28,7 +28,7 @@
*
* Micro9-High has up to 64MB of 32-bit flash on CS1
* Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
- * Micro9-Lite uses a seperate MTD map driver for flash support
+ * Micro9-Lite uses a separate MTD map driver for flash support
* Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
*************************************************************************/
static struct physmap_flash_data micro9_flash_data;
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 9438bf6..ab3712c 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -38,7 +38,7 @@
#define SRC_CR_INIT_MASK 0x00007fff
#define SRC_CR_INIT_VAL 0x2aaa8000
-/* These adresses span 16MB, so use three individual pages */
+/* These addresses span 16MB, so use three individual pages */
static struct resource nhk8815_nand_resources[] = {
{
.name = "nand_addr",
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 4386d2b..4386d2b 100755..100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index ca95d8d..ca95d8d 100755..100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
diff --git a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
index 980a099..dcef228 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
@@ -3,7 +3,7 @@
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C2410 - SPI Controller platfrom_device info
+ * S3C2410 - SPI Controller platform_device info
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c
index 4385986..ea7ff19 100644
--- a/arch/arm/mach-s5pc100/setup-sdhci.c
+++ b/arch/arm/mach-s5pc100/setup-sdhci.c
@@ -28,8 +28,8 @@
char *s5pc100_hsmmc_clksrcs[4] = {
[0] = "hsmmc",
[1] = "hsmmc",
- /* [2] = "mmc_bus", not yet succesfuuly used yet */
- /* [3] = "48m", - note not succesfully used yet */
+ /* [2] = "mmc_bus", not yet successfully used yet */
+ /* [3] = "48m", - note not successfully used yet */
};
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 01b5031..5f34eb6 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -358,7 +358,7 @@ static struct resource ave_resources[] = {
/*
* The AVE3e requires two regions of 256MB that it considers
* "invisible". The hardware will not be able to access these
- * adresses, so they should never point to system RAM.
+ * addresses, so they should never point to system RAM.
*/
{
.name = "AVE3e Reserved 0",
@@ -1596,7 +1596,7 @@ static void __init u300_init_check_chip(void)
/*
* Some devices and their resources require reserved physical memory from
* the end of the available RAM. This function traverses the list of devices
- * and assigns actual adresses to these.
+ * and assigns actual addresses to these.
*/
static void __init u300_assign_physmem(void)
{
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
index ca4a028..92c1242 100644
--- a/arch/arm/mach-u300/include/mach/debug-macro.S
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
#include <mach/hardware.h>
.macro addruart, rx, tmp
- /* If we move the adress using MMU, use this. */
+ /* If we move the address using MMU, use this. */
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index 33d421d..d623235 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -135,7 +135,7 @@ struct s3c_cpufreq_config {
* @locktime_m: The lock-time in uS for the MPLL.
* @locktime_u: The lock-time in uS for the UPLL.
* @locttime_bits: The number of bits each LOCKTIME field.
- * @need_pll: Set if this driver needs to change the PLL values to acheive
+ * @need_pll: Set if this driver needs to change the PLL values to achieve
* any frequency changes. This is really only need by devices like the
* S3C2410 where there is no or limited divider between the PLL and the
* ARMCLK.
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
index 652e2bb..dda19da 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
@@ -78,7 +78,7 @@ extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
* others = Special functions (dependant on bank)
*
* Note, since the code to deal with the case where there are two control
- * registers instead of one, we do not have a seperate set of functions for
+ * registers instead of one, we do not have a separate set of functions for
* each case.
*/
extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip,
diff --git a/arch/arm/plat-samsung/include/plat/nand.h b/arch/arm/plat-samsung/include/plat/nand.h
index 226147b..b64115f 100644
--- a/arch/arm/plat-samsung/include/plat/nand.h
+++ b/arch/arm/plat-samsung/include/plat/nand.h
@@ -3,7 +3,7 @@
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C2410 - NAND device controller platfrom_device info
+ * S3C2410 - NAND device controller platform_device info
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h
index 36a85f5..a111ad8 100644
--- a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h
+++ b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h
@@ -12,7 +12,7 @@
* published by the Free Software Foundation.
*/
-/* Note, this is a seperate header file as some of the clock framework
+/* Note, this is a separate header file as some of the clock framework
* needs to touch this if the clk_48m is used as the USB OHCI or other
* peripheral source.
*/
OpenPOWER on IntegriCloud