diff options
Diffstat (limited to 'arch/arm')
103 files changed, 2374 insertions, 1167 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 475950c..620f2ca 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -67,10 +67,6 @@ config GENERIC_BUST_SPINLOCK config GENERIC_ISA_DMA bool -config GENERIC_IOMAP - bool - default y - config FIQ bool @@ -161,7 +157,7 @@ config ARCH_RPC config ARCH_SA1100 bool "SA1100-based" select ISA - select DISCONTIGMEM + select ARCH_DISCONTIGMEM_ENABLE config ARCH_S3C2410 bool "Samsung S3C2410" @@ -202,6 +198,11 @@ config ARCH_H720X help This enables support for systems based on the Hynix HMS720x +config ARCH_AAEC2000 + bool "Agilent AAEC-2000 based" + help + This enables support for systems based on the Agilent AAEC-2000 + endchoice source "arch/arm/mach-clps711x/Kconfig" @@ -234,6 +235,8 @@ source "arch/arm/mach-h720x/Kconfig" source "arch/arm/mach-versatile/Kconfig" +source "arch/arm/mach-aaec2000/Kconfig" + # Definitions to make life easier config ARCH_ACORN bool @@ -277,7 +280,7 @@ config ISA_DMA_API default y config PCI - bool "PCI support" if ARCH_INTEGRATOR_AP + bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB help Find out whether you have a PCI motherboard. PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside @@ -343,7 +346,27 @@ config PREEMPT Say Y here if you are building a kernel for a desktop, embedded or real-time system. Say N if you are unsure. -config DISCONTIGMEM +config NO_IDLE_HZ + bool "Dynamic tick timer" + help + Select this option if you want to disable continuous timer ticks + and have them programmed to occur as required. This option saves + power as the system can remain in idle state for longer. + + By default dynamic tick is disabled during the boot, and can be + manually enabled with: + + echo 1 > /sys/devices/system/timer/timer0/dyn_tick + + Alternatively, if you want dynamic tick automatically enabled + during boot, pass "dyntick=enable" via the kernel command string. + + Please note that dynamic tick may affect the accuracy of + timekeeping on some platforms depending on the implementation. + Currently at least OMAP platform is known to have accurate + timekeeping with dynamic tick. + +config ARCH_DISCONTIGMEM_ENABLE bool default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM) help @@ -352,6 +375,8 @@ config DISCONTIGMEM or have huge holes in the physical address space for other reasons. See <file:Documentation/vm/numa> for more. +source "mm/Kconfig" + config LEDS bool "Timer and CPU usage LEDs" depends on ARCH_CDB89712 || ARCH_CO285 || ARCH_EBSA110 || \ diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 2277e3d..eb933dc 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -56,7 +56,7 @@ tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) tune-$(CONFIG_CPU_V6) :=-mtune=strongarm # Need -Uarm for gcc < 3.x -CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,) CFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm AFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float @@ -97,6 +97,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000 machine-$(CONFIG_ARCH_VERSATILE) := versatile machine-$(CONFIG_ARCH_IMX) := imx machine-$(CONFIG_ARCH_H720X) := h720x + machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. diff --git a/arch/arm/boot/install.sh b/arch/arm/boot/install.sh index 935bb27..9f9bed2 100644 --- a/arch/arm/boot/install.sh +++ b/arch/arm/boot/install.sh @@ -21,8 +21,8 @@ # # User may have a custom install script -if [ -x ~/bin/installkernel ]; then exec ~/bin/installkernel "$@"; fi -if [ -x /sbin/installkernel ]; then exec /sbin/installkernel "$@"; fi +if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi +if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi if [ "$(basename $2)" = "zImage" ]; then # Compressed install diff --git a/arch/arm/common/amba.c b/arch/arm/common/amba.c index a0507f8..c6beb75 100644 --- a/arch/arm/common/amba.c +++ b/arch/arm/common/amba.c @@ -169,7 +169,7 @@ static void amba_device_release(struct device *dev) } #define amba_attr(name,fmt,arg...) \ -static ssize_t show_##name(struct device *_dev, char *buf) \ +static ssize_t show_##name(struct device *_dev, struct device_attribute *attr, char *buf) \ { \ struct amba_device *dev = to_amba_device(_dev); \ return sprintf(buf, fmt, arg); \ diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 5797b1b..cbf2165 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -30,6 +30,8 @@ #include <linux/dmapool.h> #include <linux/list.h> +#include <asm/cacheflush.h> + #undef DEBUG #undef STATS @@ -91,15 +93,12 @@ static void print_alloc_stats(struct dmabounce_device_info *device_info) static inline struct dmabounce_device_info * find_dmabounce_dev(struct device *dev) { - struct list_head *entry; - - list_for_each(entry, &dmabounce_devs) { - struct dmabounce_device_info *d = - list_entry(entry, struct dmabounce_device_info, node); + struct dmabounce_device_info *d; + list_for_each_entry(d, &dmabounce_devs, node) if (d->dev == dev) return d; - } + return NULL; } @@ -170,15 +169,11 @@ alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr, static inline struct safe_buffer * find_safe_buffer(struct dmabounce_device_info *device_info, dma_addr_t safe_dma_addr) { - struct list_head *entry; - - list_for_each(entry, &device_info->safe_buffers) { - struct safe_buffer *b = - list_entry(entry, struct safe_buffer, node); + struct safe_buffer *b; + list_for_each_entry(b, &device_info->safe_buffers, node) if (b->safe_dma_addr == safe_dma_addr) return b; - } return NULL; } @@ -299,15 +294,26 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, __func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr), buf->safe, (void *) buf->safe_dma_addr); - DO_STATS ( device_info->bounce_count++ ); - if ((dir == DMA_FROM_DEVICE) || - (dir == DMA_BIDIRECTIONAL)) { + if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) { + unsigned long ptr; + dev_dbg(dev, "%s: copy back safe %p to unsafe %p size %d\n", __func__, buf->safe, buf->ptr, size); memcpy(buf->ptr, buf->safe, size); + + /* + * DMA buffers must have the same cache properties + * as if they were really used for DMA - which means + * data must be written back to RAM. Note that + * we don't use dmac_flush_range() here for the + * bidirectional case because we know the cache + * lines will be coherent with the data written. + */ + ptr = (unsigned long)buf->ptr; + dmac_clean_range(ptr, ptr + size); } free_safe_buffer(device_info, buf); } diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 21fce34..38c2eb6 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -721,16 +721,17 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) return ret; } +static int sa1111_remove_one(struct device *dev, void *data) +{ + device_unregister(dev); + return 0; +} + static void __sa1111_remove(struct sa1111 *sachip) { - struct list_head *l, *n; void __iomem *irqbase = sachip->base + SA1111_INTC; - list_for_each_safe(l, n, &sachip->dev->children) { - struct device *d = list_to_dev(l); - - device_unregister(d); - } + device_for_each_child(sachip->dev, NULL, sa1111_remove_one); /* disable all IRQs */ sa1111_writel(0, irqbase + SA1111_INTEN0); diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c index c2c557a..c94864c 100644 --- a/arch/arm/common/sharpsl_param.c +++ b/arch/arm/common/sharpsl_param.c @@ -22,7 +22,7 @@ * them early in the boot process, then pass them to the appropriate drivers. * Not all devices use all paramaters but the format is common to all. */ -#ifdef ARCH_SA1100 +#ifdef CONFIG_ARCH_SA1100 #define PARAM_BASE 0xe8ffc000 #else #define PARAM_BASE 0xa0000a00 diff --git a/arch/arm/configs/enp2611_defconfig b/arch/arm/configs/enp2611_defconfig index e8f9fcc..b8c51ee 100644 --- a/arch/arm/configs/enp2611_defconfig +++ b/arch/arm/configs/enp2611_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 22:08:24 2005 +# Linux kernel version: 2.6.12-git6 +# Sat Jun 25 00:57:29 2005 # CONFIG_ARM=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y # # Code maturity level options @@ -16,6 +15,7 @@ CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -35,6 +35,8 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -50,7 +52,13 @@ CONFIG_BASE_SMALL=0 # # Loadable module support # -# CONFIG_MODULES is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y # # System Type @@ -76,6 +84,7 @@ CONFIG_ARCH_IXP2000=y # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y # @@ -90,6 +99,7 @@ CONFIG_ARCH_ENP2611=y # CONFIG_ARCH_IXDP2800 is not set # CONFIG_ARCH_IXDP2401 is not set # CONFIG_ARCH_IXDP2801 is not set +# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set # # Processor Type @@ -100,7 +110,6 @@ CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y # # Processor Features @@ -112,9 +121,11 @@ CONFIG_XSCALE_PMU=y # # Bus support # +CONFIG_ISA_DMA_API=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -124,7 +135,15 @@ CONFIG_PCI_NAMES=y # # Kernel Features # +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_ALIGNMENT_TRAP=y # @@ -263,7 +282,6 @@ CONFIG_MTD_IXP2000=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -302,6 +320,7 @@ CONFIG_IOSCHED_CFQ=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -323,10 +342,11 @@ CONFIG_NET=y # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_PNP=y @@ -343,6 +363,17 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_TUNNEL is not set # CONFIG_IP_TCPDIAG is not set # CONFIG_IP_TCPDIAG_IPV6 is not set + +# +# TCP congestion control +# +CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set @@ -398,6 +429,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -434,9 +466,11 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) @@ -458,6 +492,7 @@ CONFIG_EEPRO100=y # Wan interfaces # CONFIG_WAN=y +# CONFIG_DSCC4 is not set # CONFIG_LANMEDIA is not set # CONFIG_SYNCLINK_SYNCPPP is not set CONFIG_HDLC=y @@ -520,7 +555,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -541,6 +575,7 @@ CONFIG_SERIAL_8250_NR_UARTS=2 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -607,17 +642,18 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set # CONFIG_I2C_IXP2000 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set @@ -631,7 +667,9 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set @@ -647,6 +685,7 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -656,14 +695,19 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -717,6 +761,7 @@ CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y @@ -757,7 +802,6 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_TMPFS_XATTR is not set @@ -795,12 +839,14 @@ CONFIG_JFFS2_RTIME=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -885,3 +931,4 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +# CONFIG_TEXTSEARCH is not set diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixdp2400_defconfig index 4fd663e..3cfbe2e 100644 --- a/arch/arm/configs/ixdp2400_defconfig +++ b/arch/arm/configs/ixdp2400_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 21:13:38 2005 +# Linux kernel version: 2.6.12-git6 +# Sat Jun 25 00:58:38 2005 # CONFIG_ARM=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y # # Code maturity level options @@ -16,6 +15,7 @@ CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -35,6 +35,8 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -50,7 +52,13 @@ CONFIG_BASE_SMALL=0 # # Loadable module support # -# CONFIG_MODULES is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y # # System Type @@ -76,6 +84,7 @@ CONFIG_ARCH_IXP2000=y # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y # @@ -91,6 +100,7 @@ CONFIG_ARCH_IXDP2400=y CONFIG_ARCH_IXDP2X00=y # CONFIG_ARCH_IXDP2401 is not set # CONFIG_ARCH_IXDP2801 is not set +# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set # # Processor Type @@ -101,7 +111,6 @@ CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y # # Processor Features @@ -113,9 +122,11 @@ CONFIG_XSCALE_PMU=y # # Bus support # +CONFIG_ISA_DMA_API=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -125,7 +136,15 @@ CONFIG_PCI_NAMES=y # # Kernel Features # +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_ALIGNMENT_TRAP=y # @@ -264,7 +283,6 @@ CONFIG_MTD_IXP2000=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -303,6 +321,7 @@ CONFIG_IOSCHED_CFQ=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -324,10 +343,11 @@ CONFIG_NET=y # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_PNP=y @@ -344,6 +364,17 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_TUNNEL is not set # CONFIG_IP_TCPDIAG is not set # CONFIG_IP_TCPDIAG_IPV6 is not set + +# +# TCP congestion control +# +CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set @@ -399,6 +430,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -435,9 +467,11 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) @@ -459,6 +493,7 @@ CONFIG_EEPRO100=y # Wan interfaces # CONFIG_WAN=y +# CONFIG_DSCC4 is not set # CONFIG_LANMEDIA is not set # CONFIG_SYNCLINK_SYNCPPP is not set CONFIG_HDLC=y @@ -521,7 +556,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -542,6 +576,7 @@ CONFIG_SERIAL_8250_NR_UARTS=2 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -608,17 +643,18 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set # CONFIG_I2C_IXP2000 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set @@ -632,7 +668,9 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set @@ -648,6 +686,7 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -657,14 +696,19 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -718,6 +762,7 @@ CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y @@ -758,7 +803,6 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_TMPFS_XATTR is not set @@ -796,12 +840,14 @@ CONFIG_JFFS2_RTIME=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -886,3 +932,4 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +# CONFIG_TEXTSEARCH is not set diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig index 6f51c98..5c87e8e 100644 --- a/arch/arm/configs/ixdp2401_defconfig +++ b/arch/arm/configs/ixdp2401_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 21:53:55 2005 +# Linux kernel version: 2.6.12-git6 +# Sat Jun 25 00:59:35 2005 # CONFIG_ARM=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y # # Code maturity level options @@ -16,6 +15,7 @@ CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -35,6 +35,8 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -50,7 +52,13 @@ CONFIG_BASE_SMALL=0 # # Loadable module support # -# CONFIG_MODULES is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y # # System Type @@ -76,6 +84,7 @@ CONFIG_ARCH_IXP2000=y # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y # @@ -91,6 +100,7 @@ CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y CONFIG_ARCH_IXDP2401=y # CONFIG_ARCH_IXDP2801 is not set CONFIG_ARCH_IXDP2X01=y +# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set # # Processor Type @@ -101,7 +111,6 @@ CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y # # Processor Features @@ -113,9 +122,11 @@ CONFIG_XSCALE_PMU=y # # Bus support # +CONFIG_ISA_DMA_API=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -125,7 +136,15 @@ CONFIG_PCI_NAMES=y # # Kernel Features # +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_ALIGNMENT_TRAP=y # @@ -264,7 +283,6 @@ CONFIG_MTD_IXP2000=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -303,6 +321,7 @@ CONFIG_IOSCHED_CFQ=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -324,10 +343,11 @@ CONFIG_NET=y # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_PNP=y @@ -344,6 +364,17 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_TUNNEL is not set CONFIG_IP_TCPDIAG=y # CONFIG_IP_TCPDIAG_IPV6 is not set + +# +# TCP congestion control +# +CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set @@ -399,6 +430,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -436,9 +468,11 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) @@ -460,6 +494,7 @@ CONFIG_EEPRO100=y # Wan interfaces # CONFIG_WAN=y +# CONFIG_DSCC4 is not set # CONFIG_LANMEDIA is not set # CONFIG_SYNCLINK_SYNCPPP is not set CONFIG_HDLC=y @@ -522,7 +557,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -543,6 +577,7 @@ CONFIG_SERIAL_8250_NR_UARTS=2 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -609,17 +644,18 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set # CONFIG_I2C_IXP2000 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set @@ -633,7 +669,9 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set @@ -649,6 +687,7 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -658,14 +697,19 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -719,6 +763,7 @@ CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y @@ -759,7 +804,6 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_TMPFS_XATTR is not set @@ -797,12 +841,14 @@ CONFIG_JFFS2_RTIME=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -887,3 +933,4 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +# CONFIG_TEXTSEARCH is not set diff --git a/arch/arm/configs/ixdp2800_defconfig b/arch/arm/configs/ixdp2800_defconfig index 7be3521..3cb561a 100644 --- a/arch/arm/configs/ixdp2800_defconfig +++ b/arch/arm/configs/ixdp2800_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 22:15:23 2005 +# Linux kernel version: 2.6.12-git6 +# Sat Jun 25 01:00:27 2005 # CONFIG_ARM=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y # # Code maturity level options @@ -16,6 +15,7 @@ CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -35,6 +35,8 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -50,7 +52,13 @@ CONFIG_BASE_SMALL=0 # # Loadable module support # -# CONFIG_MODULES is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y # # System Type @@ -76,6 +84,7 @@ CONFIG_ARCH_IXP2000=y # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y # @@ -91,6 +100,7 @@ CONFIG_ARCH_IXDP2800=y CONFIG_ARCH_IXDP2X00=y # CONFIG_ARCH_IXDP2401 is not set # CONFIG_ARCH_IXDP2801 is not set +# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set # # Processor Type @@ -101,7 +111,6 @@ CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y # # Processor Features @@ -113,9 +122,11 @@ CONFIG_XSCALE_PMU=y # # Bus support # +CONFIG_ISA_DMA_API=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -125,7 +136,15 @@ CONFIG_PCI_NAMES=y # # Kernel Features # +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_ALIGNMENT_TRAP=y # @@ -264,7 +283,6 @@ CONFIG_MTD_IXP2000=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -303,6 +321,7 @@ CONFIG_IOSCHED_CFQ=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -324,10 +343,11 @@ CONFIG_NET=y # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_PNP=y @@ -344,6 +364,17 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_TUNNEL is not set # CONFIG_IP_TCPDIAG is not set # CONFIG_IP_TCPDIAG_IPV6 is not set + +# +# TCP congestion control +# +CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set @@ -399,6 +430,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -435,9 +467,11 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) @@ -459,6 +493,7 @@ CONFIG_EEPRO100=y # Wan interfaces # CONFIG_WAN=y +# CONFIG_DSCC4 is not set # CONFIG_LANMEDIA is not set # CONFIG_SYNCLINK_SYNCPPP is not set CONFIG_HDLC=y @@ -521,7 +556,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -542,6 +576,7 @@ CONFIG_SERIAL_8250_NR_UARTS=2 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -608,17 +643,18 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set # CONFIG_I2C_IXP2000 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set @@ -632,7 +668,9 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set @@ -648,6 +686,7 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -657,14 +696,19 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -718,6 +762,7 @@ CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y @@ -758,7 +803,6 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_TMPFS_XATTR is not set @@ -796,12 +840,14 @@ CONFIG_JFFS2_RTIME=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -886,3 +932,4 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +# CONFIG_TEXTSEARCH is not set diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig index cd84a20..b1e162f 100644 --- a/arch/arm/configs/ixdp2801_defconfig +++ b/arch/arm/configs/ixdp2801_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 22:39:19 2005 +# Linux kernel version: 2.6.12-git6 +# Sat Jun 25 01:01:18 2005 # CONFIG_ARM=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y # # Code maturity level options @@ -16,6 +15,7 @@ CONFIG_GENERIC_IOMAP=y CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -35,6 +35,8 @@ CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -50,7 +52,13 @@ CONFIG_BASE_SMALL=0 # # Loadable module support # -# CONFIG_MODULES is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y # # System Type @@ -76,6 +84,7 @@ CONFIG_ARCH_IXP2000=y # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y # @@ -91,6 +100,7 @@ CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y # CONFIG_ARCH_IXDP2401 is not set CONFIG_ARCH_IXDP2801=y CONFIG_ARCH_IXDP2X01=y +# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set # # Processor Type @@ -101,7 +111,6 @@ CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_MINICACHE=y # # Processor Features @@ -113,9 +122,11 @@ CONFIG_XSCALE_PMU=y # # Bus support # +CONFIG_ISA_DMA_API=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y +# CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support @@ -125,7 +136,15 @@ CONFIG_PCI_NAMES=y # # Kernel Features # +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_ALIGNMENT_TRAP=y # @@ -264,7 +283,6 @@ CONFIG_MTD_IXP2000=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -303,6 +321,7 @@ CONFIG_IOSCHED_CFQ=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -324,10 +343,11 @@ CONFIG_NET=y # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_PNP=y @@ -344,6 +364,17 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_TUNNEL is not set # CONFIG_IP_TCPDIAG is not set # CONFIG_IP_TCPDIAG_IPV6 is not set + +# +# TCP congestion control +# +CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set @@ -399,6 +430,7 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set # # Tulip family network device support @@ -436,9 +468,11 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) @@ -460,6 +494,7 @@ CONFIG_EEPRO100=y # Wan interfaces # CONFIG_WAN=y +# CONFIG_DSCC4 is not set # CONFIG_LANMEDIA is not set # CONFIG_SYNCLINK_SYNCPPP is not set CONFIG_HDLC=y @@ -522,7 +557,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -543,6 +577,7 @@ CONFIG_SERIAL_8250_NR_UARTS=2 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -609,17 +644,18 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_ISA is not set # CONFIG_I2C_IXP2000 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set @@ -633,7 +669,9 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set @@ -649,6 +687,7 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -658,14 +697,19 @@ CONFIG_I2C_SENSOR=y # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -719,6 +763,7 @@ CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y @@ -759,7 +804,6 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_TMPFS_XATTR is not set @@ -797,12 +841,14 @@ CONFIG_JFFS2_RTIME=y # CONFIG_NFS_FS=y CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -887,3 +933,4 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +# CONFIG_TEXTSEARCH is not set diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 2a63fb2..98b72ff 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,14 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 17:47:45 2005 +# Linux kernel version: 2.6.12-git4 +# Wed Jun 22 15:56:42 2005 # CONFIG_ARM=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y # # Code maturity level options @@ -17,6 +16,7 @@ CONFIG_EXPERIMENTAL=y # CONFIG_CLEAN_COMPILE is not set CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup @@ -35,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y @@ -81,6 +83,7 @@ CONFIG_ARCH_S3C2410=y # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set # # S3C24XX Implementations @@ -134,6 +137,7 @@ CONFIG_CPU_TLB_V4WBI=y # # Bus support # +CONFIG_ISA_DMA_API=y # # PCCARD (PCMCIA/CardBus) support @@ -143,7 +147,9 @@ CONFIG_CPU_TLB_V4WBI=y # # Kernel Features # +# CONFIG_SMP is not set # CONFIG_PREEMPT is not set +# CONFIG_DISCONTIGMEM is not set CONFIG_ALIGNMENT_TRAP=y # @@ -297,7 +303,6 @@ CONFIG_PARPORT_1284=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y @@ -359,6 +364,7 @@ CONFIG_BLK_DEV_IDE_BAST=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -378,10 +384,11 @@ CONFIG_NET=y # Networking options # # CONFIG_PACKET is not set -# CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_PNP=y @@ -443,8 +450,9 @@ CONFIG_NETDEVICES=y # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set +CONFIG_MII=m # CONFIG_SMC91X is not set +CONFIG_DM9000=m # # Ethernet (1000 Mbit) @@ -521,7 +529,6 @@ CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -605,7 +612,6 @@ CONFIG_S3C2410_RTC=y # # TPM devices # -# CONFIG_TCG_TPM is not set # # I2C support @@ -654,6 +660,7 @@ CONFIG_SENSORS_LM78=m CONFIG_SENSORS_LM85=m # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -665,6 +672,7 @@ CONFIG_SENSORS_LM85=m # # Other I2C Chip support # +# CONFIG_SENSORS_DS1337 is not set CONFIG_SENSORS_EEPROM=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -696,8 +704,10 @@ CONFIG_FB=y # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set # CONFIG_FB_SOFT_CURSOR is not set +# CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -782,7 +792,6 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set # CONFIG_TMPFS is not set # CONFIG_HUGETLBFS is not set diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 4a2af55..3e1b032 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -6,7 +6,7 @@ AFLAGS_head.o := -DTEXTADDR=$(TEXTADDR) -DDATAADDR=$(DATAADDR) # Object file lists. -obj-y := arch.o compat.o dma.o entry-armv.o entry-common.o irq.o \ +obj-y := compat.o dma.o entry-armv.o entry-common.o irq.o \ process.o ptrace.o semaphore.o setup.o signal.o sys_arm.o \ time.o traps.o diff --git a/arch/arm/kernel/arch.c b/arch/arm/kernel/arch.c deleted file mode 100644 index 4e02fbe..0000000 --- a/arch/arm/kernel/arch.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * linux/arch/arm/kernel/arch.c - * - * Architecture specific fixups. - */ -#include <linux/config.h> -#include <linux/init.h> -#include <linux/types.h> - -#include <asm/elf.h> -#include <asm/page.h> -#include <asm/setup.h> -#include <asm/mach/arch.h> - -unsigned int vram_size; - -#ifdef CONFIG_ARCH_ACORN - -unsigned int memc_ctrl_reg; -unsigned int number_mfm_drives; - -static int __init parse_tag_acorn(const struct tag *tag) -{ - memc_ctrl_reg = tag->u.acorn.memc_control_reg; - number_mfm_drives = tag->u.acorn.adfsdrives; - - switch (tag->u.acorn.vram_pages) { - case 512: - vram_size += PAGE_SIZE * 256; - case 256: - vram_size += PAGE_SIZE * 256; - default: - break; - } -#if 0 - if (vram_size) { - desc->video_start = 0x02000000; - desc->video_end = 0x02000000 + vram_size; - } -#endif - return 0; -} - -__tagtable(ATAG_ACORN, parse_tag_acorn); - -#endif diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 4c38bd8..b713c44 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -30,9 +30,6 @@ extern void __lshrdi3(void); extern void __modsi3(void); extern void __muldi3(void); extern void __ucmpdi2(void); -extern void __udivdi3(void); -extern void __umoddi3(void); -extern void __udivmoddi4(void); extern void __udivsi3(void); extern void __umodsi3(void); extern void __do_div64(void); @@ -134,9 +131,6 @@ EXPORT_SYMBOL(__lshrdi3); EXPORT_SYMBOL(__modsi3); EXPORT_SYMBOL(__muldi3); EXPORT_SYMBOL(__ucmpdi2); -EXPORT_SYMBOL(__udivdi3); -EXPORT_SYMBOL(__umoddi3); -EXPORT_SYMBOL(__udivmoddi4); EXPORT_SYMBOL(__udivsi3); EXPORT_SYMBOL(__umodsi3); EXPORT_SYMBOL(__do_div64); diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index 3dc15b1..6540db6 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -866,19 +866,19 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot) return ec; } -static ssize_t ecard_show_irq(struct device *dev, char *buf) +static ssize_t ecard_show_irq(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); return sprintf(buf, "%u\n", ec->irq); } -static ssize_t ecard_show_dma(struct device *dev, char *buf) +static ssize_t ecard_show_dma(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); return sprintf(buf, "%u\n", ec->dma); } -static ssize_t ecard_show_resources(struct device *dev, char *buf) +static ssize_t ecard_show_resources(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); char *str = buf; @@ -893,19 +893,19 @@ static ssize_t ecard_show_resources(struct device *dev, char *buf) return str - buf; } -static ssize_t ecard_show_vendor(struct device *dev, char *buf) +static ssize_t ecard_show_vendor(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); return sprintf(buf, "%u\n", ec->cid.manufacturer); } -static ssize_t ecard_show_device(struct device *dev, char *buf) +static ssize_t ecard_show_device(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); return sprintf(buf, "%u\n", ec->cid.product); } -static ssize_t ecard_show_type(struct device *dev, char *buf) +static ssize_t ecard_show_type(struct device *dev, struct device_attribute *attr, char *buf) { struct expansion_card *ec = ECARD_DEV(dev); return sprintf(buf, "%s\n", ec->type == ECARD_EASI ? "EASI" : "IOC"); diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index ff187f4..395137a 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -4,6 +4,10 @@ * Copyright (C) 1992 Linus Torvalds * Modifications for ARM processor Copyright (C) 1995-2000 Russell King. * + * Support for Dynamic Tick Timer Copyright (C) 2004-2005 Nokia Corporation. + * Dynamic Tick Timer written by Tony Lindgren <tony@atomide.com> and + * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>. + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -37,6 +41,7 @@ #include <asm/irq.h> #include <asm/system.h> #include <asm/mach/irq.h> +#include <asm/mach/time.h> /* * Maximum IRQ count. Currently, this is arbitary. However, it should @@ -329,6 +334,15 @@ __do_irq(unsigned int irq, struct irqaction *action, struct pt_regs *regs) spin_unlock(&irq_controller_lock); +#ifdef CONFIG_NO_IDLE_HZ + if (!(action->flags & SA_TIMER) && system_timer->dyn_tick != NULL) { + write_seqlock(&xtime_lock); + if (system_timer->dyn_tick->state & DYN_TICK_ENABLED) + system_timer->dyn_tick->handler(irq, 0, regs); + write_sequnlock(&xtime_lock); + } +#endif + if (!(action->flags & SA_INTERRUPT)) local_irq_enable(); diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 8f146a4..bbea636 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -32,6 +32,7 @@ #include <asm/leds.h> #include <asm/processor.h> #include <asm/uaccess.h> +#include <asm/mach/time.h> extern const char *processor_modes[]; extern void setup_mm_for_reboot(char mode); @@ -85,8 +86,10 @@ EXPORT_SYMBOL(pm_power_off); void default_idle(void) { local_irq_disable(); - if (!need_resched() && !hlt_counter) + if (!need_resched() && !hlt_counter) { + timer_dyn_reprogram(); arch_idle(); + } local_irq_enable(); } diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 9fed5fa..35b7273 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -359,7 +359,8 @@ void cpu_init(void) "I" (offsetof(struct stack, abt[0])), "I" (PSR_F_BIT | PSR_I_BIT | UND_MODE), "I" (offsetof(struct stack, und[0])), - "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE)); + "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE) + : "r14"); } static struct machine_desc * __init setup_machine(unsigned int nr) @@ -395,6 +396,20 @@ static void __init early_initrd(char **p) } __early_param("initrd=", early_initrd); +static void __init add_memory(unsigned long start, unsigned long size) +{ + /* + * Ensure that start/size are aligned to a page boundary. + * Size is appropriately rounded down, start is rounded up. + */ + size -= start & ~PAGE_MASK; + + meminfo.bank[meminfo.nr_banks].start = PAGE_ALIGN(start); + meminfo.bank[meminfo.nr_banks].size = size & PAGE_MASK; + meminfo.bank[meminfo.nr_banks].node = PHYS_TO_NID(start); + meminfo.nr_banks += 1; +} + /* * Pick out the memory size. We look for mem=size@start, * where start and size are "size[KkMm]" @@ -419,10 +434,7 @@ static void __init early_mem(char **p) if (**p == '@') start = memparse(*p + 1, p); - meminfo.bank[meminfo.nr_banks].start = start; - meminfo.bank[meminfo.nr_banks].size = size; - meminfo.bank[meminfo.nr_banks].node = PHYS_TO_NID(start); - meminfo.nr_banks += 1; + add_memory(start, size); } __early_param("mem=", early_mem); @@ -564,11 +576,7 @@ static int __init parse_tag_mem32(const struct tag *tag) tag->u.mem.start, tag->u.mem.size / 1024); return -EINVAL; } - meminfo.bank[meminfo.nr_banks].start = tag->u.mem.start; - meminfo.bank[meminfo.nr_banks].size = tag->u.mem.size; - meminfo.bank[meminfo.nr_banks].node = PHYS_TO_NID(tag->u.mem.start); - meminfo.nr_banks += 1; - + add_memory(tag->u.mem.start, tag->u.mem.size); return 0; } diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 931919f..5e435e4 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -19,6 +19,7 @@ #include <asm/unistd.h> #include "ptrace.h" +#include "signal.h" #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) @@ -35,7 +36,7 @@ #define SWI_THUMB_SIGRETURN (0xdf00 << 16 | 0x2700 | (__NR_sigreturn - __NR_SYSCALL_BASE)) #define SWI_THUMB_RT_SIGRETURN (0xdf00 << 16 | 0x2700 | (__NR_rt_sigreturn - __NR_SYSCALL_BASE)) -static const unsigned long retcodes[4] = { +const unsigned long sigreturn_codes[4] = { SWI_SYS_SIGRETURN, SWI_THUMB_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN }; @@ -500,17 +501,25 @@ setup_return(struct pt_regs *regs, struct k_sigaction *ka, if (ka->sa.sa_flags & SA_SIGINFO) idx += 2; - if (__put_user(retcodes[idx], rc)) + if (__put_user(sigreturn_codes[idx], rc)) return 1; - /* - * Ensure that the instruction cache sees - * the return code written onto the stack. - */ - flush_icache_range((unsigned long)rc, - (unsigned long)(rc + 1)); - - retcode = ((unsigned long)rc) + thumb; + if (cpsr & MODE32_BIT) { + /* + * 32-bit code can use the new high-page + * signal return code support. + */ + retcode = KERN_SIGRETURN_CODE + (idx << 2) + thumb; + } else { + /* + * Ensure that the instruction cache sees + * the return code written onto the stack. + */ + flush_icache_range((unsigned long)rc, + (unsigned long)(rc + 1)); + + retcode = ((unsigned long)rc) + thumb; + } } regs->ARM_r0 = usig; @@ -688,7 +697,7 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall) if (!user_mode(regs)) return 0; - if (try_to_freeze(0)) + if (try_to_freeze()) goto no_signal; if (current->ptrace & PT_SINGLESTEP) diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h new file mode 100644 index 0000000..91d26fa --- /dev/null +++ b/arch/arm/kernel/signal.h @@ -0,0 +1,12 @@ +/* + * linux/arch/arm/kernel/signal.h + * + * Copyright (C) 2005 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#define KERN_SIGRETURN_CODE 0xffff0500 + +extern const unsigned long sigreturn_codes[4]; diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 45ed036..a931409 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -145,7 +145,8 @@ int __init __cpu_up(unsigned int cpu) pgd_free(pgd); if (ret) { - printk(KERN_CRIT "cpu_up: processor %d failed to boot\n", cpu); + printk(KERN_CRIT "CPU%u: processor failed to boot\n", cpu); + /* * FIXME: We need to clean up the new idle thread. --rmk */ @@ -501,3 +502,126 @@ int __init setup_profiling_timer(unsigned int multiplier) { return -EINVAL; } + +static int +on_each_cpu_mask(void (*func)(void *), void *info, int retry, int wait, + cpumask_t mask) +{ + int ret = 0; + + preempt_disable(); + + ret = smp_call_function_on_cpu(func, info, retry, wait, mask); + if (cpu_isset(smp_processor_id(), mask)) + func(info); + + preempt_enable(); + + return ret; +} + +/**********************************************************************/ + +/* + * TLB operations + */ +struct tlb_args { + struct vm_area_struct *ta_vma; + unsigned long ta_start; + unsigned long ta_end; +}; + +static inline void ipi_flush_tlb_all(void *ignored) +{ + local_flush_tlb_all(); +} + +static inline void ipi_flush_tlb_mm(void *arg) +{ + struct mm_struct *mm = (struct mm_struct *)arg; + + local_flush_tlb_mm(mm); +} + +static inline void ipi_flush_tlb_page(void *arg) +{ + struct tlb_args *ta = (struct tlb_args *)arg; + + local_flush_tlb_page(ta->ta_vma, ta->ta_start); +} + +static inline void ipi_flush_tlb_kernel_page(void *arg) +{ + struct tlb_args *ta = (struct tlb_args *)arg; + + local_flush_tlb_kernel_page(ta->ta_start); +} + +static inline void ipi_flush_tlb_range(void *arg) +{ + struct tlb_args *ta = (struct tlb_args *)arg; + + local_flush_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end); +} + +static inline void ipi_flush_tlb_kernel_range(void *arg) +{ + struct tlb_args *ta = (struct tlb_args *)arg; + + local_flush_tlb_kernel_range(ta->ta_start, ta->ta_end); +} + +void flush_tlb_all(void) +{ + on_each_cpu(ipi_flush_tlb_all, NULL, 1, 1); +} + +void flush_tlb_mm(struct mm_struct *mm) +{ + cpumask_t mask = mm->cpu_vm_mask; + + on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, 1, mask); +} + +void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) +{ + cpumask_t mask = vma->vm_mm->cpu_vm_mask; + struct tlb_args ta; + + ta.ta_vma = vma; + ta.ta_start = uaddr; + + on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, 1, mask); +} + +void flush_tlb_kernel_page(unsigned long kaddr) +{ + struct tlb_args ta; + + ta.ta_start = kaddr; + + on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1, 1); +} + +void flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + cpumask_t mask = vma->vm_mm->cpu_vm_mask; + struct tlb_args ta; + + ta.ta_vma = vma; + ta.ta_start = start; + ta.ta_end = end; + + on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, 1, mask); +} + +void flush_tlb_kernel_range(unsigned long start, unsigned long end) +{ + struct tlb_args ta; + + ta.ta_start = start; + ta.ta_end = end; + + on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1, 1); +} diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index c232f24..1b7fcd5 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -381,6 +381,99 @@ static struct sysdev_class timer_sysclass = { .resume = timer_resume, }; +#ifdef CONFIG_NO_IDLE_HZ +static int timer_dyn_tick_enable(void) +{ + struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick; + unsigned long flags; + int ret = -ENODEV; + + if (dyn_tick) { + write_seqlock_irqsave(&xtime_lock, flags); + ret = 0; + if (!(dyn_tick->state & DYN_TICK_ENABLED)) { + ret = dyn_tick->enable(); + + if (ret == 0) + dyn_tick->state |= DYN_TICK_ENABLED; + } + write_sequnlock_irqrestore(&xtime_lock, flags); + } + + return ret; +} + +static int timer_dyn_tick_disable(void) +{ + struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick; + unsigned long flags; + int ret = -ENODEV; + + if (dyn_tick) { + write_seqlock_irqsave(&xtime_lock, flags); + ret = 0; + if (dyn_tick->state & DYN_TICK_ENABLED) { + ret = dyn_tick->disable(); + + if (ret == 0) + dyn_tick->state &= ~DYN_TICK_ENABLED; + } + write_sequnlock_irqrestore(&xtime_lock, flags); + } + + return ret; +} + +/* + * Reprogram the system timer for at least the calculated time interval. + * This function should be called from the idle thread with IRQs disabled, + * immediately before sleeping. + */ +void timer_dyn_reprogram(void) +{ + struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick; + + write_seqlock(&xtime_lock); + if (dyn_tick->state & DYN_TICK_ENABLED) + dyn_tick->reprogram(next_timer_interrupt() - jiffies); + write_sequnlock(&xtime_lock); +} + +static ssize_t timer_show_dyn_tick(struct sys_device *dev, char *buf) +{ + return sprintf(buf, "%i\n", + (system_timer->dyn_tick->state & DYN_TICK_ENABLED) >> 1); +} + +static ssize_t timer_set_dyn_tick(struct sys_device *dev, const char *buf, + size_t count) +{ + unsigned int enable = simple_strtoul(buf, NULL, 2); + + if (enable) + timer_dyn_tick_enable(); + else + timer_dyn_tick_disable(); + + return count; +} +static SYSDEV_ATTR(dyn_tick, 0644, timer_show_dyn_tick, timer_set_dyn_tick); + +/* + * dyntick=enable|disable + */ +static char dyntick_str[4] __initdata = ""; + +static int __init dyntick_setup(char *str) +{ + if (str) + strlcpy(dyntick_str, str, sizeof(dyntick_str)); + return 1; +} + +__setup("dyntick=", dyntick_setup); +#endif + static int __init timer_init_sysfs(void) { int ret = sysdev_class_register(&timer_sysclass); @@ -388,6 +481,20 @@ static int __init timer_init_sysfs(void) system_timer->dev.cls = &timer_sysclass; ret = sysdev_register(&system_timer->dev); } + +#ifdef CONFIG_NO_IDLE_HZ + if (ret == 0 && system_timer->dyn_tick) { + ret = sysdev_create_file(&system_timer->dev, &attr_dyn_tick); + + /* + * Turn on dynamic tick after calibrate delay + * for correct bogomips + */ + if (ret == 0 && dyntick_str[0] == 'e') + ret = timer_dyn_tick_enable(); + } +#endif + return ret; } diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 45d2a03..df2cb06 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -30,6 +30,7 @@ #include <asm/traps.h> #include "ptrace.h" +#include "signal.h" const char *processor_modes[]= { "USER_26", "FIQ_26" , "IRQ_26" , "SVC_26" , "UK4_26" , "UK5_26" , "UK6_26" , "UK7_26" , @@ -229,16 +230,8 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err) do_exit(SIGSEGV); } -void die_if_kernel(const char *str, struct pt_regs *regs, int err) -{ - if (user_mode(regs)) - return; - - die(str, regs, err); -} - -static void notify_die(const char *str, struct pt_regs *regs, siginfo_t *info, - unsigned long err, unsigned long trap) +void notify_die(const char *str, struct pt_regs *regs, struct siginfo *info, + unsigned long err, unsigned long trap) { if (user_mode(regs)) { current->thread.error_code = err; @@ -683,6 +676,14 @@ void __init trap_init(void) memcpy((void *)0xffff0000, __vectors_start, __vectors_end - __vectors_start); memcpy((void *)0xffff0200, __stubs_start, __stubs_end - __stubs_start); memcpy((void *)0xffff1000 - kuser_sz, __kuser_helper_start, kuser_sz); + + /* + * Copy signal return handlers into the vector page, and + * set sigreturn to be a pointer to these. + */ + memcpy((void *)KERN_SIGRETURN_CODE, sigreturn_codes, + sizeof(sigreturn_codes)); + flush_icache_range(0xffff0000, 0xffff0000 + PAGE_SIZE); modify_domain(DOMAIN_USER, DOMAIN_CLIENT); } diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index c0e6583..8725d63 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -11,7 +11,7 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ strnlen_user.o strchr.o strrchr.o testchangebit.o \ testclearbit.o testsetbit.o uaccess.o getuser.o \ putuser.o ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ - ucmpdi2.o udivdi3.o lib1funcs.o div64.o \ + ucmpdi2.o lib1funcs.o div64.o \ io-readsb.o io-writesb.o io-readsl.o io-writesl.o ifeq ($(CONFIG_CPU_32v3),y) diff --git a/arch/arm/lib/ashldi3.c b/arch/arm/lib/ashldi3.c index 130f5a8..b62875c 100644 --- a/arch/arm/lib/ashldi3.c +++ b/arch/arm/lib/ashldi3.c @@ -31,31 +31,26 @@ Boston, MA 02111-1307, USA. */ #include "gcclib.h" -DItype -__ashldi3 (DItype u, word_type b) +s64 __ashldi3(s64 u, int b) { - DIunion w; - word_type bm; - DIunion uu; - - if (b == 0) - return u; - - uu.ll = u; - - bm = (sizeof (SItype) * BITS_PER_UNIT) - b; - if (bm <= 0) - { - w.s.low = 0; - w.s.high = (USItype)uu.s.low << -bm; - } - else - { - USItype carries = (USItype)uu.s.low >> bm; - w.s.low = (USItype)uu.s.low << b; - w.s.high = ((USItype)uu.s.high << b) | carries; - } - - return w.ll; + DIunion w; + int bm; + DIunion uu; + + if (b == 0) + return u; + + uu.ll = u; + + bm = (sizeof(s32) * BITS_PER_UNIT) - b; + if (bm <= 0) { + w.s.low = 0; + w.s.high = (u32) uu.s.low << -bm; + } else { + u32 carries = (u32) uu.s.low >> bm; + w.s.low = (u32) uu.s.low << b; + w.s.high = ((u32) uu.s.high << b) | carries; + } + + return w.ll; } - diff --git a/arch/arm/lib/ashrdi3.c b/arch/arm/lib/ashrdi3.c index 71625d2..9a8600a 100644 --- a/arch/arm/lib/ashrdi3.c +++ b/arch/arm/lib/ashrdi3.c @@ -31,31 +31,27 @@ Boston, MA 02111-1307, USA. */ #include "gcclib.h" -DItype -__ashrdi3 (DItype u, word_type b) +s64 __ashrdi3(s64 u, int b) { - DIunion w; - word_type bm; - DIunion uu; - - if (b == 0) - return u; - - uu.ll = u; - - bm = (sizeof (SItype) * BITS_PER_UNIT) - b; - if (bm <= 0) - { - /* w.s.high = 1..1 or 0..0 */ - w.s.high = uu.s.high >> (sizeof (SItype) * BITS_PER_UNIT - 1); - w.s.low = uu.s.high >> -bm; - } - else - { - USItype carries = (USItype)uu.s.high << bm; - w.s.high = uu.s.high >> b; - w.s.low = ((USItype)uu.s.low >> b) | carries; - } - - return w.ll; + DIunion w; + int bm; + DIunion uu; + + if (b == 0) + return u; + + uu.ll = u; + + bm = (sizeof(s32) * BITS_PER_UNIT) - b; + if (bm <= 0) { + /* w.s.high = 1..1 or 0..0 */ + w.s.high = uu.s.high >> (sizeof(s32) * BITS_PER_UNIT - 1); + w.s.low = uu.s.high >> -bm; + } else { + u32 carries = (u32) uu.s.high << bm; + w.s.high = uu.s.high >> b; + w.s.low = ((u32) uu.s.low >> b) | carries; + } + + return w.ll; } diff --git a/arch/arm/lib/gcclib.h b/arch/arm/lib/gcclib.h index 65314a3..8b6dcc6 100644 --- a/arch/arm/lib/gcclib.h +++ b/arch/arm/lib/gcclib.h @@ -1,25 +1,22 @@ /* gcclib.h -- definitions for various functions 'borrowed' from gcc-2.95.3 */ /* I Molton 29/07/01 */ -#define BITS_PER_UNIT 8 -#define SI_TYPE_SIZE (sizeof (SItype) * BITS_PER_UNIT) +#include <linux/types.h> -typedef unsigned int UQItype __attribute__ ((mode (QI))); -typedef int SItype __attribute__ ((mode (SI))); -typedef unsigned int USItype __attribute__ ((mode (SI))); -typedef int DItype __attribute__ ((mode (DI))); -typedef int word_type __attribute__ ((mode (__word__))); -typedef unsigned int UDItype __attribute__ ((mode (DI))); +#define BITS_PER_UNIT 8 +#define SI_TYPE_SIZE (sizeof(s32) * BITS_PER_UNIT) #ifdef __ARMEB__ - struct DIstruct {SItype high, low;}; +struct DIstruct { + s32 high, low; +}; #else - struct DIstruct {SItype low, high;}; +struct DIstruct { + s32 low, high; +}; #endif -typedef union -{ - struct DIstruct s; - DItype ll; +typedef union { + struct DIstruct s; + s64 ll; } DIunion; - diff --git a/arch/arm/lib/longlong.h b/arch/arm/lib/longlong.h deleted file mode 100644 index 179eea4..0000000 --- a/arch/arm/lib/longlong.h +++ /dev/null @@ -1,183 +0,0 @@ -/* longlong.h -- based on code from gcc-2.95.3 - - definitions for mixed size 32/64 bit arithmetic. - Copyright (C) 1991, 92, 94, 95, 96, 1997, 1998 Free Software Foundation, Inc. - - This definition file is free software; you can redistribute it - and/or modify it under the terms of the GNU General Public - License as published by the Free Software Foundation; either - version 2, or (at your option) any later version. - - This definition file is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place - Suite 330, - Boston, MA 02111-1307, USA. */ - -/* Borrowed from GCC 2.95.3, I Molton 29/07/01 */ - -#ifndef SI_TYPE_SIZE -#define SI_TYPE_SIZE 32 -#endif - -#define __BITS4 (SI_TYPE_SIZE / 4) -#define __ll_B (1L << (SI_TYPE_SIZE / 2)) -#define __ll_lowpart(t) ((USItype) (t) % __ll_B) -#define __ll_highpart(t) ((USItype) (t) / __ll_B) - -/* Define auxiliary asm macros. - - 1) umul_ppmm(high_prod, low_prod, multipler, multiplicand) - multiplies two USItype integers MULTIPLER and MULTIPLICAND, - and generates a two-part USItype product in HIGH_PROD and - LOW_PROD. - - 2) __umulsidi3(a,b) multiplies two USItype integers A and B, - and returns a UDItype product. This is just a variant of umul_ppmm. - - 3) udiv_qrnnd(quotient, remainder, high_numerator, low_numerator, - denominator) divides a two-word unsigned integer, composed by the - integers HIGH_NUMERATOR and LOW_NUMERATOR, by DENOMINATOR and - places the quotient in QUOTIENT and the remainder in REMAINDER. - HIGH_NUMERATOR must be less than DENOMINATOR for correct operation. - If, in addition, the most significant bit of DENOMINATOR must be 1, - then the pre-processor symbol UDIV_NEEDS_NORMALIZATION is defined to 1. - - 4) sdiv_qrnnd(quotient, remainder, high_numerator, low_numerator, - denominator). Like udiv_qrnnd but the numbers are signed. The - quotient is rounded towards 0. - - 5) count_leading_zeros(count, x) counts the number of zero-bits from - the msb to the first non-zero bit. This is the number of steps X - needs to be shifted left to set the msb. Undefined for X == 0. - - 6) add_ssaaaa(high_sum, low_sum, high_addend_1, low_addend_1, - high_addend_2, low_addend_2) adds two two-word unsigned integers, - composed by HIGH_ADDEND_1 and LOW_ADDEND_1, and HIGH_ADDEND_2 and - LOW_ADDEND_2 respectively. The result is placed in HIGH_SUM and - LOW_SUM. Overflow (i.e. carry out) is not stored anywhere, and is - lost. - - 7) sub_ddmmss(high_difference, low_difference, high_minuend, - low_minuend, high_subtrahend, low_subtrahend) subtracts two - two-word unsigned integers, composed by HIGH_MINUEND_1 and - LOW_MINUEND_1, and HIGH_SUBTRAHEND_2 and LOW_SUBTRAHEND_2 - respectively. The result is placed in HIGH_DIFFERENCE and - LOW_DIFFERENCE. Overflow (i.e. carry out) is not stored anywhere, - and is lost. - - If any of these macros are left undefined for a particular CPU, - C macros are used. */ - -#if defined (__arm__) -#define add_ssaaaa(sh, sl, ah, al, bh, bl) \ - __asm__ ("adds %1, %4, %5 \n\ - adc %0, %2, %3" \ - : "=r" ((USItype) (sh)), \ - "=&r" ((USItype) (sl)) \ - : "%r" ((USItype) (ah)), \ - "rI" ((USItype) (bh)), \ - "%r" ((USItype) (al)), \ - "rI" ((USItype) (bl))) -#define sub_ddmmss(sh, sl, ah, al, bh, bl) \ - __asm__ ("subs %1, %4, %5 \n\ - sbc %0, %2, %3" \ - : "=r" ((USItype) (sh)), \ - "=&r" ((USItype) (sl)) \ - : "r" ((USItype) (ah)), \ - "rI" ((USItype) (bh)), \ - "r" ((USItype) (al)), \ - "rI" ((USItype) (bl))) -#define umul_ppmm(xh, xl, a, b) \ -{register USItype __t0, __t1, __t2; \ - __asm__ ("%@ Inlined umul_ppmm \n\ - mov %2, %5, lsr #16 \n\ - mov %0, %6, lsr #16 \n\ - bic %3, %5, %2, lsl #16 \n\ - bic %4, %6, %0, lsl #16 \n\ - mul %1, %3, %4 \n\ - mul %4, %2, %4 \n\ - mul %3, %0, %3 \n\ - mul %0, %2, %0 \n\ - adds %3, %4, %3 \n\ - addcs %0, %0, #65536 \n\ - adds %1, %1, %3, lsl #16 \n\ - adc %0, %0, %3, lsr #16" \ - : "=&r" ((USItype) (xh)), \ - "=r" ((USItype) (xl)), \ - "=&r" (__t0), "=&r" (__t1), "=r" (__t2) \ - : "r" ((USItype) (a)), \ - "r" ((USItype) (b)));} -#define UMUL_TIME 20 -#define UDIV_TIME 100 -#endif /* __arm__ */ - -#define __umulsidi3(u, v) \ - ({DIunion __w; \ - umul_ppmm (__w.s.high, __w.s.low, u, v); \ - __w.ll; }) - -#define __udiv_qrnnd_c(q, r, n1, n0, d) \ - do { \ - USItype __d1, __d0, __q1, __q0; \ - USItype __r1, __r0, __m; \ - __d1 = __ll_highpart (d); \ - __d0 = __ll_lowpart (d); \ - \ - __r1 = (n1) % __d1; \ - __q1 = (n1) / __d1; \ - __m = (USItype) __q1 * __d0; \ - __r1 = __r1 * __ll_B | __ll_highpart (n0); \ - if (__r1 < __m) \ - { \ - __q1--, __r1 += (d); \ - if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\ - if (__r1 < __m) \ - __q1--, __r1 += (d); \ - } \ - __r1 -= __m; \ - \ - __r0 = __r1 % __d1; \ - __q0 = __r1 / __d1; \ - __m = (USItype) __q0 * __d0; \ - __r0 = __r0 * __ll_B | __ll_lowpart (n0); \ - if (__r0 < __m) \ - { \ - __q0--, __r0 += (d); \ - if (__r0 >= (d)) \ - if (__r0 < __m) \ - __q0--, __r0 += (d); \ - } \ - __r0 -= __m; \ - \ - (q) = (USItype) __q1 * __ll_B | __q0; \ - (r) = __r0; \ - } while (0) - -#define UDIV_NEEDS_NORMALIZATION 1 -#define udiv_qrnnd __udiv_qrnnd_c - -#define count_leading_zeros(count, x) \ - do { \ - USItype __xr = (x); \ - USItype __a; \ - \ - if (SI_TYPE_SIZE <= 32) \ - { \ - __a = __xr < ((USItype)1<<2*__BITS4) \ - ? (__xr < ((USItype)1<<__BITS4) ? 0 : __BITS4) \ - : (__xr < ((USItype)1<<3*__BITS4) ? 2*__BITS4 : 3*__BITS4); \ - } \ - else \ - { \ - for (__a = SI_TYPE_SIZE - 8; __a > 0; __a -= 8) \ - if (((__xr >> __a) & 0xff) != 0) \ - break; \ - } \ - \ - (count) = SI_TYPE_SIZE - (__clz_tab[__xr >> __a] + __a); \ - } while (0) diff --git a/arch/arm/lib/lshrdi3.c b/arch/arm/lib/lshrdi3.c index b666f1b..3681f49 100644 --- a/arch/arm/lib/lshrdi3.c +++ b/arch/arm/lib/lshrdi3.c @@ -31,31 +31,26 @@ Boston, MA 02111-1307, USA. */ #include "gcclib.h" -DItype -__lshrdi3 (DItype u, word_type b) +s64 __lshrdi3(s64 u, int b) { - DIunion w; - word_type bm; - DIunion uu; - - if (b == 0) - return u; - - uu.ll = u; - - bm = (sizeof (SItype) * BITS_PER_UNIT) - b; - if (bm <= 0) - { - w.s.high = 0; - w.s.low = (USItype)uu.s.high >> -bm; - } - else - { - USItype carries = (USItype)uu.s.high << bm; - w.s.high = (USItype)uu.s.high >> b; - w.s.low = ((USItype)uu.s.low >> b) | carries; - } - - return w.ll; + DIunion w; + int bm; + DIunion uu; + + if (b == 0) + return u; + + uu.ll = u; + + bm = (sizeof(s32) * BITS_PER_UNIT) - b; + if (bm <= 0) { + w.s.high = 0; + w.s.low = (u32) uu.s.high >> -bm; + } else { + u32 carries = (u32) uu.s.high << bm; + w.s.high = (u32) uu.s.high >> b; + w.s.low = ((u32) uu.s.low >> b) | carries; + } + + return w.ll; } - diff --git a/arch/arm/lib/muldi3.c b/arch/arm/lib/muldi3.c index 44d611b..0a3b933 100644 --- a/arch/arm/lib/muldi3.c +++ b/arch/arm/lib/muldi3.c @@ -32,7 +32,7 @@ Boston, MA 02111-1307, USA. */ #include "gcclib.h" #define umul_ppmm(xh, xl, a, b) \ -{register USItype __t0, __t1, __t2; \ +{register u32 __t0, __t1, __t2; \ __asm__ ("%@ Inlined umul_ppmm \n\ mov %2, %5, lsr #16 \n\ mov %0, %6, lsr #16 \n\ @@ -46,32 +46,27 @@ Boston, MA 02111-1307, USA. */ addcs %0, %0, #65536 \n\ adds %1, %1, %3, lsl #16 \n\ adc %0, %0, %3, lsr #16" \ - : "=&r" ((USItype) (xh)), \ - "=r" ((USItype) (xl)), \ + : "=&r" ((u32) (xh)), \ + "=r" ((u32) (xl)), \ "=&r" (__t0), "=&r" (__t1), "=r" (__t2) \ - : "r" ((USItype) (a)), \ - "r" ((USItype) (b)));} - + : "r" ((u32) (a)), \ + "r" ((u32) (b)));} #define __umulsidi3(u, v) \ ({DIunion __w; \ umul_ppmm (__w.s.high, __w.s.low, u, v); \ __w.ll; }) - -DItype -__muldi3 (DItype u, DItype v) +s64 __muldi3(s64 u, s64 v) { - DIunion w; - DIunion uu, vv; + DIunion w; + DIunion uu, vv; - uu.ll = u, - vv.ll = v; + uu.ll = u, vv.ll = v; - w.ll = __umulsidi3 (uu.s.low, vv.s.low); - w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high - + (USItype) uu.s.high * (USItype) vv.s.low); + w.ll = __umulsidi3(uu.s.low, vv.s.low); + w.s.high += ((u32) uu.s.low * (u32) vv.s.high + + (u32) uu.s.high * (u32) vv.s.low); - return w.ll; + return w.ll; } - diff --git a/arch/arm/lib/ucmpdi2.c b/arch/arm/lib/ucmpdi2.c index 6c6ae63..57f3f2d 100644 --- a/arch/arm/lib/ucmpdi2.c +++ b/arch/arm/lib/ucmpdi2.c @@ -31,21 +31,19 @@ Boston, MA 02111-1307, USA. */ #include "gcclib.h" -word_type -__ucmpdi2 (DItype a, DItype b) +int __ucmpdi2(s64 a, s64 b) { - DIunion au, bu; - - au.ll = a, bu.ll = b; - - if ((USItype) au.s.high < (USItype) bu.s.high) - return 0; - else if ((USItype) au.s.high > (USItype) bu.s.high) - return 2; - if ((USItype) au.s.low < (USItype) bu.s.low) - return 0; - else if ((USItype) au.s.low > (USItype) bu.s.low) - return 2; - return 1; + DIunion au, bu; + + au.ll = a, bu.ll = b; + + if ((u32) au.s.high < (u32) bu.s.high) + return 0; + else if ((u32) au.s.high > (u32) bu.s.high) + return 2; + if ((u32) au.s.low < (u32) bu.s.low) + return 0; + else if ((u32) au.s.low > (u32) bu.s.low) + return 2; + return 1; } - diff --git a/arch/arm/lib/udivdi3.c b/arch/arm/lib/udivdi3.c deleted file mode 100644 index d25195f..0000000 --- a/arch/arm/lib/udivdi3.c +++ /dev/null @@ -1,242 +0,0 @@ -/* More subroutines needed by GCC output code on some machines. */ -/* Compile this one with gcc. */ -/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc. - -This file is part of GNU CC. - -GNU CC is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 2, or (at your option) -any later version. - -GNU CC is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU CC; see the file COPYING. If not, write to -the Free Software Foundation, 59 Temple Place - Suite 330, -Boston, MA 02111-1307, USA. */ - -/* As a special exception, if you link this library with other files, - some of which are compiled with GCC, to produce an executable, - this library does not by itself cause the resulting executable - to be covered by the GNU General Public License. - This exception does not however invalidate any other reasons why - the executable file might be covered by the GNU General Public License. - */ -/* support functions required by the kernel. based on code from gcc-2.95.3 */ -/* I Molton 29/07/01 */ - -#include "gcclib.h" -#include "longlong.h" - -static const UQItype __clz_tab[] = -{ - 0,1,2,2,3,3,3,3,4,4,4,4,4,4,4,4,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5, - 6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6, - 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7, - 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7, - 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, - 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, - 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, - 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8, -}; - -UDItype -__udivmoddi4 (UDItype n, UDItype d, UDItype *rp) -{ - DIunion ww; - DIunion nn, dd; - DIunion rr; - USItype d0, d1, n0, n1, n2; - USItype q0, q1; - USItype b, bm; - - nn.ll = n; - dd.ll = d; - - d0 = dd.s.low; - d1 = dd.s.high; - n0 = nn.s.low; - n1 = nn.s.high; - - if (d1 == 0) - { - if (d0 > n1) - { - /* 0q = nn / 0D */ - - count_leading_zeros (bm, d0); - - if (bm != 0) - { - /* Normalize, i.e. make the most significant bit of the - denominator set. */ - - d0 = d0 << bm; - n1 = (n1 << bm) | (n0 >> (SI_TYPE_SIZE - bm)); - n0 = n0 << bm; - } - - udiv_qrnnd (q0, n0, n1, n0, d0); - q1 = 0; - - /* Remainder in n0 >> bm. */ - } - else - { - /* qq = NN / 0d */ - - if (d0 == 0) - d0 = 1 / d0; /* Divide intentionally by zero. */ - - count_leading_zeros (bm, d0); - - if (bm == 0) - { - /* From (n1 >= d0) /\ (the most significant bit of d0 is set), - conclude (the most significant bit of n1 is set) /\ (the - leading quotient digit q1 = 1). - - This special case is necessary, not an optimization. - (Shifts counts of SI_TYPE_SIZE are undefined.) */ - - n1 -= d0; - q1 = 1; - } - else - { - /* Normalize. */ - - b = SI_TYPE_SIZE - bm; - - d0 = d0 << bm; - n2 = n1 >> b; - n1 = (n1 << bm) | (n0 >> b); - n0 = n0 << bm; - - udiv_qrnnd (q1, n1, n2, n1, d0); - } - - /* n1 != d0... */ - - udiv_qrnnd (q0, n0, n1, n0, d0); - - /* Remainder in n0 >> bm. */ - } - - if (rp != 0) - { - rr.s.low = n0 >> bm; - rr.s.high = 0; - *rp = rr.ll; - } - } - else - { - if (d1 > n1) - { - /* 00 = nn / DD */ - - q0 = 0; - q1 = 0; - - /* Remainder in n1n0. */ - if (rp != 0) - { - rr.s.low = n0; - rr.s.high = n1; - *rp = rr.ll; - } - } - else - { - /* 0q = NN / dd */ - - count_leading_zeros (bm, d1); - if (bm == 0) - { - /* From (n1 >= d1) /\ (the most significant bit of d1 is set), - conclude (the most significant bit of n1 is set) /\ (the - quotient digit q0 = 0 or 1). - - This special case is necessary, not an optimization. */ - - /* The condition on the next line takes advantage of that - n1 >= d1 (true due to program flow). */ - if (n1 > d1 || n0 >= d0) - { - q0 = 1; - sub_ddmmss (n1, n0, n1, n0, d1, d0); - } - else - q0 = 0; - - q1 = 0; - - if (rp != 0) - { - rr.s.low = n0; - rr.s.high = n1; - *rp = rr.ll; - } - } - else - { - USItype m1, m0; - /* Normalize. */ - - b = SI_TYPE_SIZE - bm; - - d1 = (d1 << bm) | (d0 >> b); - d0 = d0 << bm; - n2 = n1 >> b; - n1 = (n1 << bm) | (n0 >> b); - n0 = n0 << bm; - - udiv_qrnnd (q0, n1, n2, n1, d1); - umul_ppmm (m1, m0, q0, d0); - - if (m1 > n1 || (m1 == n1 && m0 > n0)) - { - q0--; - sub_ddmmss (m1, m0, m1, m0, d1, d0); - } - - q1 = 0; - - /* Remainder in (n1n0 - m1m0) >> bm. */ - if (rp != 0) - { - sub_ddmmss (n1, n0, n1, n0, m1, m0); - rr.s.low = (n1 << b) | (n0 >> bm); - rr.s.high = n1 >> bm; - *rp = rr.ll; - } - } - } - } - - ww.s.low = q0; - ww.s.high = q1; - return ww.ll; -} - -UDItype -__udivdi3 (UDItype n, UDItype d) -{ - return __udivmoddi4 (n, d, (UDItype *) 0); -} - -UDItype -__umoddi3 (UDItype u, UDItype v) -{ - UDItype w; - - (void) __udivmoddi4 (u ,v, &w); - - return w; -} - diff --git a/arch/arm/mach-aaec2000/Kconfig b/arch/arm/mach-aaec2000/Kconfig new file mode 100644 index 0000000..5e4bef9 --- /dev/null +++ b/arch/arm/mach-aaec2000/Kconfig @@ -0,0 +1,11 @@ +if ARCH_AAEC2000 + +menu "Agilent AAEC-2000 Implementations" + +config MACH_AAED2000 + bool "Agilent AAED-2000 Development Platform" + select CPU_ARM920T + +endmenu + +endif diff --git a/arch/arm/mach-aaec2000/Makefile b/arch/arm/mach-aaec2000/Makefile new file mode 100644 index 0000000..20ec838 --- /dev/null +++ b/arch/arm/mach-aaec2000/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for the linux kernel. +# + +# Common support (must be linked before board specific support) +obj-y += core.o + +# Specific board support +obj-$(CONFIG_MACH_AAED2000) += aaed2000.o diff --git a/arch/arm/mach-aaec2000/Makefile.boot b/arch/arm/mach-aaec2000/Makefile.boot new file mode 100644 index 0000000..8f5a8b7 --- /dev/null +++ b/arch/arm/mach-aaec2000/Makefile.boot @@ -0,0 +1 @@ + zreladdr-y := 0xf0008000 diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c new file mode 100644 index 0000000..5417ca3 --- /dev/null +++ b/arch/arm/mach-aaec2000/aaed2000.c @@ -0,0 +1,48 @@ +/* + * linux/arch/arm/mach-aaec2000/aaed2000.c + * + * Support for the Agilent AAED-2000 Development Platform. + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/major.h> +#include <linux/interrupt.h> + +#include <asm/setup.h> +#include <asm/memory.h> +#include <asm/mach-types.h> +#include <asm/hardware.h> +#include <asm/irq.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include "core.h" + +static void __init aaed2000_init_irq(void) +{ + aaec2000_init_irq(); +} + +static void __init aaed2000_map_io(void) +{ + aaec2000_map_io(); +} + +MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform") + MAINTAINER("Nicolas Bellido Y Ortega") + BOOT_MEM(0xf0000000, PIO_BASE, VIO_BASE) + MAPIO(aaed2000_map_io) + INITIRQ(aaed2000_init_irq) + .timer = &aaec2000_timer, +MACHINE_END diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c new file mode 100644 index 0000000..aece0cd --- /dev/null +++ b/arch/arm/mach-aaec2000/core.c @@ -0,0 +1,157 @@ +/* + * linux/arch/arm/mach-aaec2000/core.c + * + * Code common to all AAEC-2000 machines + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/timex.h> +#include <linux/signal.h> + +#include <asm/hardware.h> +#include <asm/irq.h> + +#include <asm/mach/irq.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> + +/* + * Common I/O mapping: + * + * Static virtual address mappings are as follow: + * + * 0xf8000000-0xf8001ffff: Devices connected to APB bus + * 0xf8002000-0xf8003ffff: Devices connected to AHB bus + * + * Below 0xe8000000 is reserved for vm allocation. + * + * The machine specific code must provide the extra mapping beside the + * default mapping provided here. + */ +static struct map_desc standard_io_desc[] __initdata = { + /* virtual physical length type */ + { VIO_APB_BASE, PIO_APB_BASE, IO_APB_LENGTH, MT_DEVICE }, + { VIO_AHB_BASE, PIO_AHB_BASE, IO_AHB_LENGTH, MT_DEVICE } +}; + +void __init aaec2000_map_io(void) +{ + iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc)); +} + +/* + * Interrupt handling routines + */ +static void aaec2000_int_ack(unsigned int irq) +{ + IRQ_INTSR = 1 << irq; +} + +static void aaec2000_int_mask(unsigned int irq) +{ + IRQ_INTENC |= (1 << irq); +} + +static void aaec2000_int_unmask(unsigned int irq) +{ + IRQ_INTENS |= (1 << irq); +} + +static struct irqchip aaec2000_irq_chip = { + .ack = aaec2000_int_ack, + .mask = aaec2000_int_mask, + .unmask = aaec2000_int_unmask, +}; + +void __init aaec2000_init_irq(void) +{ + unsigned int i; + + for (i = 0; i < NR_IRQS; i++) { + set_irq_handler(i, do_level_IRQ); + set_irq_chip(i, &aaec2000_irq_chip); + set_irq_flags(i, IRQF_VALID); + } + + /* Disable all interrupts */ + IRQ_INTENC = 0xffffffff; + + /* Clear any pending interrupts */ + IRQ_INTSR = IRQ_INTSR; +} + +/* + * Time keeping + */ +/* IRQs are disabled before entering here from do_gettimeofday() */ +static unsigned long aaec2000_gettimeoffset(void) +{ + unsigned long ticks_to_match, elapsed, usec; + + /* Get ticks before next timer match */ + ticks_to_match = TIMER1_LOAD - TIMER1_VAL; + + /* We need elapsed ticks since last match */ + elapsed = LATCH - ticks_to_match; + + /* Now, convert them to usec */ + usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH; + + return usec; +} + +/* We enter here with IRQs enabled */ +static irqreturn_t +aaec2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + /* TODO: Check timer accuracy */ + write_seqlock(&xtime_lock); + + timer_tick(regs); + TIMER1_CLEAR = 1; + + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +static struct irqaction aaec2000_timer_irq = { + .name = "AAEC-2000 Timer Tick", + .flags = SA_INTERRUPT | SA_TIMER, + .handler = aaec2000_timer_interrupt, +}; + +static void __init aaec2000_timer_init(void) +{ + /* Disable timer 1 */ + TIMER1_CTRL = 0; + + /* We have somehow to generate a 100Hz clock. + * We then use the 508KHz timer in periodic mode. + */ + TIMER1_LOAD = LATCH; + TIMER1_CLEAR = 1; /* Clear interrupt */ + + setup_irq(INT_TMR1_OFL, &aaec2000_timer_irq); + + TIMER1_CTRL = TIMER_CTRL_ENABLE | + TIMER_CTRL_PERIODIC | + TIMER_CTRL_CLKSEL_508K; +} + +struct sys_timer aaec2000_timer = { + .init = aaec2000_timer_init, + .offset = aaec2000_gettimeoffset, +}; + diff --git a/arch/arm/mach-aaec2000/core.h b/arch/arm/mach-aaec2000/core.h new file mode 100644 index 0000000..91893d8 --- /dev/null +++ b/arch/arm/mach-aaec2000/core.h @@ -0,0 +1,16 @@ +/* + * linux/arch/arm/mach-aaec2000/core.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +struct sys_timer; + +extern struct sys_timer aaec2000_timer; +extern void __init aaec2000_map_io(void); +extern void __init aaec2000_init_irq(void); diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index 45c930c..0793dcf 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -28,7 +28,7 @@ config ARCH_CLEP7312 config ARCH_EDB7211 bool "EDB7211" select ISA - select DISCONTIGMEM + select ARCH_DISCONTIGMEM_ENABLE help Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211 evaluation board. diff --git a/arch/arm/mach-clps711x/time.c b/arch/arm/mach-clps711x/time.c index 383d4e0..1a23f0d 100644 --- a/arch/arm/mach-clps711x/time.c +++ b/arch/arm/mach-clps711x/time.c @@ -57,8 +57,8 @@ p720t_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction clps711x_timer_irq = { .name = "CLPS711x Timer Tick", - .flags = SA_INTERRUPT, - .handler = p720t_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = p720t_timer_interrupt, }; static void __init clps711x_timer_init(void) diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c index fdfeded..90e85f43 100644 --- a/arch/arm/mach-clps7500/core.c +++ b/arch/arm/mach-clps7500/core.c @@ -26,6 +26,8 @@ #include <asm/irq.h> #include <asm/mach-types.h> +unsigned int vram_size; + static void cl7500_ack_irq_a(unsigned int irq) { unsigned int val, mask; @@ -296,8 +298,8 @@ clps7500_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction clps7500_timer_irq = { .name = "CLPS7500 Timer Tick", - .flags = SA_INTERRUPT, - .handler = clps7500_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = clps7500_timer_interrupt, }; /* diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index ef362d4..86ffdbb 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -173,8 +173,8 @@ ebsa110_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction ebsa110_timer_irq = { .name = "EBSA110 Timer Tick", - .flags = SA_INTERRUPT, - .handler = ebsa110_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = ebsa110_timer_interrupt, }; /* diff --git a/arch/arm/mach-epxa10db/time.c b/arch/arm/mach-epxa10db/time.c index 1b991f3..4b1084d 100644 --- a/arch/arm/mach-epxa10db/time.c +++ b/arch/arm/mach-epxa10db/time.c @@ -56,8 +56,8 @@ epxa10db_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction epxa10db_timer_irq = { .name = "Excalibur Timer Tick", - .flags = SA_INTERRUPT, - .handler = epxa10db_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = epxa10db_timer_interrupt, }; /* diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c index da5b9b7..14a62d6 100644 --- a/arch/arm/mach-footbridge/dc21285-timer.c +++ b/arch/arm/mach-footbridge/dc21285-timer.c @@ -43,7 +43,7 @@ timer1_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction footbridge_timer_irq = { .name = "Timer1 timer tick", .handler = timer1_interrupt, - .flags = SA_INTERRUPT, + .flags = SA_INTERRUPT | SA_TIMER, }; /* diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c index a4fefa0..c1d74f7a 100644 --- a/arch/arm/mach-footbridge/isa-timer.c +++ b/arch/arm/mach-footbridge/isa-timer.c @@ -72,7 +72,7 @@ isa_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction isa_timer_irq = { .name = "ISA timer tick", .handler = isa_timer_interrupt, - .flags = SA_INTERRUPT, + .flags = SA_INTERRUPT | SA_TIMER, }; static void __init isa_timer_init(void) diff --git a/arch/arm/mach-h720x/cpu-h7201.c b/arch/arm/mach-h720x/cpu-h7201.c index 7436568..af9e4a5 100644 --- a/arch/arm/mach-h720x/cpu-h7201.c +++ b/arch/arm/mach-h720x/cpu-h7201.c @@ -41,8 +41,8 @@ h7201_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction h7201_timer_irq = { .name = "h7201 Timer Tick", - .flags = SA_INTERRUPT, - .handler = h7201_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = h7201_timer_interrupt, }; /* diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c index 21b8fb6..593b6a2 100644 --- a/arch/arm/mach-h720x/cpu-h7202.c +++ b/arch/arm/mach-h720x/cpu-h7202.c @@ -171,8 +171,8 @@ static struct irqchip h7202_timerx_chip = { static struct irqaction h7202_timer_irq = { .name = "h7202 Timer Tick", - .flags = SA_INTERRUPT, - .handler = h7202_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = h7202_timer_interrupt, }; /* diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c index 11f1e56..ea805bf 100644 --- a/arch/arm/mach-imx/time.c +++ b/arch/arm/mach-imx/time.c @@ -72,8 +72,8 @@ imx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction imx_timer_irq = { .name = "i.MX Timer Tick", - .flags = SA_INTERRUPT, - .handler = imx_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = imx_timer_interrupt, }; /* diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index d302f04..dacbf50 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -20,6 +20,7 @@ #include <asm/irq.h> #include <asm/io.h> #include <asm/hardware/amba.h> +#include <asm/hardware/arm_timer.h> #include <asm/arch/cm.h> #include <asm/system.h> #include <asm/leds.h> @@ -156,16 +157,6 @@ EXPORT_SYMBOL(cm_control); #define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) #endif -/* - * What does it look like? - */ -typedef struct TimerStruct { - unsigned long TimerLoad; - unsigned long TimerValue; - unsigned long TimerControl; - unsigned long TimerClear; -} TimerStruct_t; - static unsigned long timer_reload; /* @@ -174,7 +165,6 @@ static unsigned long timer_reload; */ unsigned long integrator_gettimeoffset(void) { - volatile TimerStruct_t *timer1 = (TimerStruct_t *)TIMER1_VA_BASE; unsigned long ticks1, ticks2, status; /* @@ -183,11 +173,11 @@ unsigned long integrator_gettimeoffset(void) * an interrupt. We get around this by ensuring that the * counter has not reloaded between our two reads. */ - ticks2 = timer1->TimerValue & 0xffff; + ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff; do { ticks1 = ticks2; status = __raw_readl(VA_IC_BASE + IRQ_RAW_STATUS); - ticks2 = timer1->TimerValue & 0xffff; + ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff; } while (ticks2 > ticks1); /* @@ -213,21 +203,18 @@ unsigned long integrator_gettimeoffset(void) static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { - volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE; - write_seqlock(&xtime_lock); /* * clear the interrupt */ - timer1->TimerClear = 1; + writel(1, TIMER1_VA_BASE + TIMER_INTCLR); /* * the clock tick routines are only processed on the * primary CPU */ if (hard_smp_processor_id() == 0) { - nmi_tick(); timer_tick(regs); #ifdef CONFIG_SMP smp_send_timer(); @@ -248,8 +235,8 @@ integrator_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction integrator_timer_irq = { .name = "Integrator Timer Tick", - .flags = SA_INTERRUPT, - .handler = integrator_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = integrator_timer_interrupt, }; /* @@ -257,32 +244,29 @@ static struct irqaction integrator_timer_irq = { */ void __init integrator_time_init(unsigned long reload, unsigned int ctrl) { - volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE; - volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE; - volatile TimerStruct_t *timer2 = (volatile TimerStruct_t *)TIMER2_VA_BASE; - unsigned int timer_ctrl = 0x80 | 0x40; /* periodic */ + unsigned int timer_ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC; timer_reload = reload; timer_ctrl |= ctrl; if (timer_reload > 0x100000) { timer_reload >>= 8; - timer_ctrl |= 0x08; /* /256 */ + timer_ctrl |= TIMER_CTRL_DIV256; } else if (timer_reload > 0x010000) { timer_reload >>= 4; - timer_ctrl |= 0x04; /* /16 */ + timer_ctrl |= TIMER_CTRL_DIV16; } /* * Initialise to a known state (all timers off) */ - timer0->TimerControl = 0; - timer1->TimerControl = 0; - timer2->TimerControl = 0; + writel(0, TIMER0_VA_BASE + TIMER_CTRL); + writel(0, TIMER1_VA_BASE + TIMER_CTRL); + writel(0, TIMER2_VA_BASE + TIMER_CTRL); - timer1->TimerLoad = timer_reload; - timer1->TimerValue = timer_reload; - timer1->TimerControl = timer_ctrl; + writel(timer_reload, TIMER1_VA_BASE + TIMER_LOAD); + writel(timer_reload, TIMER1_VA_BASE + TIMER_VALUE); + writel(timer_ctrl, TIMER1_VA_BASE + TIMER_CTRL); /* * Make irqs happen for the system timer diff --git a/arch/arm/mach-iop3xx/iop321-time.c b/arch/arm/mach-iop3xx/iop321-time.c index 9b7dd64..d53af16 100644 --- a/arch/arm/mach-iop3xx/iop321-time.c +++ b/arch/arm/mach-iop3xx/iop321-time.c @@ -86,7 +86,7 @@ iop321_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction iop321_timer_irq = { .name = "IOP321 Timer Tick", .handler = iop321_timer_interrupt, - .flags = SA_INTERRUPT + .flags = SA_INTERRUPT | SA_TIMER, }; static void __init iop321_timer_init(void) diff --git a/arch/arm/mach-iop3xx/iop331-time.c b/arch/arm/mach-iop3xx/iop331-time.c index e016967..1a6d9d6 100644 --- a/arch/arm/mach-iop3xx/iop331-time.c +++ b/arch/arm/mach-iop3xx/iop331-time.c @@ -83,7 +83,7 @@ iop331_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction iop331_timer_irq = { .name = "IOP331 Timer Tick", .handler = iop331_timer_interrupt, - .flags = SA_INTERRUPT + .flags = SA_INTERRUPT | SA_TIMER, }; static void __init iop331_timer_init(void) diff --git a/arch/arm/mach-ixp2000/Kconfig b/arch/arm/mach-ixp2000/Kconfig index 9361e05..ecb58d8 100644 --- a/arch/arm/mach-ixp2000/Kconfig +++ b/arch/arm/mach-ixp2000/Kconfig @@ -54,6 +54,14 @@ config ARCH_IXDP2X01 depends on ARCH_IXDP2401 || ARCH_IXDP2801 default y +config IXP2000_SUPPORT_BROKEN_PCI_IO + bool "Support broken PCI I/O on older IXP2000s" + default y + help + Say 'N' here if you only intend to run your kernel on an + IXP2000 B0 or later model and do not need the PCI I/O + byteswap workaround. Say 'Y' otherwise. + endmenu endif diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index 4f3c3d5c..4b9d841 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -40,6 +40,8 @@ #include <asm/mach/time.h> #include <asm/mach/irq.h> +#include <asm/arch/gpio.h> + static DEFINE_SPINLOCK(ixp2000_slowport_lock); static unsigned long ixp2000_slowport_irq_flags; @@ -101,6 +103,11 @@ static struct map_desc ixp2000_io_desc[] __initdata = { .length = IXP2000_PCI_CSR_SIZE, .type = MT_DEVICE }, { + .virtual = IXP2000_MSF_VIRT_BASE, + .physical = IXP2000_MSF_PHYS_BASE, + .length = IXP2000_MSF_SIZE, + .type = MT_DEVICE + }, { .virtual = IXP2000_PCI_IO_VIRT_BASE, .physical = IXP2000_PCI_IO_PHYS_BASE, .length = IXP2000_PCI_IO_SIZE, @@ -162,12 +169,13 @@ void __init ixp2000_map_io(void) static unsigned ticks_per_jiffy; static unsigned ticks_per_usec; static unsigned next_jiffy_time; +static volatile unsigned long *missing_jiffy_timer_csr; unsigned long ixp2000_gettimeoffset (void) { unsigned long offset; - offset = next_jiffy_time - *IXP2000_T4_CSR; + offset = next_jiffy_time - *missing_jiffy_timer_csr; return offset / ticks_per_usec; } @@ -178,8 +186,8 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) /* clear timer 1 */ ixp2000_reg_write(IXP2000_T1_CLR, 1); - - while ((next_jiffy_time - *IXP2000_T4_CSR) > ticks_per_jiffy) { + + while ((next_jiffy_time - *missing_jiffy_timer_csr) > ticks_per_jiffy) { timer_tick(regs); next_jiffy_time -= ticks_per_jiffy; } @@ -191,26 +199,43 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction ixp2000_timer_irq = { .name = "IXP2000 Timer Tick", - .flags = SA_INTERRUPT, - .handler = ixp2000_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = ixp2000_timer_interrupt, }; void __init ixp2000_init_time(unsigned long tick_rate) { - ixp2000_reg_write(IXP2000_T1_CLR, 0); - ixp2000_reg_write(IXP2000_T4_CLR, 0); - ticks_per_jiffy = (tick_rate + HZ/2) / HZ; ticks_per_usec = tick_rate / 1000000; + /* + * We use timer 1 as our timer interrupt. + */ + ixp2000_reg_write(IXP2000_T1_CLR, 0); ixp2000_reg_write(IXP2000_T1_CLD, ticks_per_jiffy - 1); ixp2000_reg_write(IXP2000_T1_CTL, (1 << 7)); /* - * We use T4 as a monotonic counter to track missed jiffies + * We use a second timer as a monotonic counter for tracking + * missed jiffies. The IXP2000 has four timers, but if we're + * on an A-step IXP2800, timer 2 and 3 don't work, so on those + * chips we use timer 4. Timer 4 is the only timer that can + * be used for the watchdog, so we use timer 2 if we're on a + * non-buggy chip. */ - ixp2000_reg_write(IXP2000_T4_CLD, -1); - ixp2000_reg_write(IXP2000_T4_CTL, (1 << 7)); + if ((*IXP2000_PRODUCT_ID & 0x001ffef0) == 0x00000000) { + printk(KERN_INFO "Enabling IXP2800 erratum #25 workaround\n"); + + ixp2000_reg_write(IXP2000_T4_CLR, 0); + ixp2000_reg_write(IXP2000_T4_CLD, -1); + ixp2000_reg_write(IXP2000_T4_CTL, (1 << 7)); + missing_jiffy_timer_csr = IXP2000_T4_CSR; + } else { + ixp2000_reg_write(IXP2000_T2_CLR, 0); + ixp2000_reg_write(IXP2000_T2_CLD, -1); + ixp2000_reg_write(IXP2000_T2_CTL, (1 << 7)); + missing_jiffy_timer_csr = IXP2000_T2_CSR; + } next_jiffy_time = 0xffffffff; /* register for interrupt */ @@ -220,35 +245,40 @@ void __init ixp2000_init_time(unsigned long tick_rate) /************************************************************************* * GPIO helpers *************************************************************************/ -static unsigned long GPIO_IRQ_rising_edge; static unsigned long GPIO_IRQ_falling_edge; +static unsigned long GPIO_IRQ_rising_edge; static unsigned long GPIO_IRQ_level_low; static unsigned long GPIO_IRQ_level_high; -void gpio_line_config(int line, int style) +static void update_gpio_int_csrs(void) +{ + ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge); + ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge); + ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low); + ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high); +} + +void gpio_line_config(int line, int direction) { unsigned long flags; local_irq_save(flags); + if (direction == GPIO_OUT) { + irq_desc[line + IRQ_IXP2000_GPIO0].valid = 0; - if(style == GPIO_OUT) { /* if it's an output, it ain't an interrupt anymore */ - ixp2000_reg_write(IXP2000_GPIO_PDSR, (1 << line)); GPIO_IRQ_falling_edge &= ~(1 << line); GPIO_IRQ_rising_edge &= ~(1 << line); GPIO_IRQ_level_low &= ~(1 << line); GPIO_IRQ_level_high &= ~(1 << line); - ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge); - ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge); - ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high); - ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low); - irq_desc[line+IRQ_IXP2000_GPIO0].valid = 0; - } else if(style == GPIO_IN) { - ixp2000_reg_write(IXP2000_GPIO_PDCR, (1 << line)); + update_gpio_int_csrs(); + + ixp2000_reg_write(IXP2000_GPIO_PDSR, 1 << line); + } else if (direction == GPIO_IN) { + ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line); } - local_irq_restore(flags); -} +} /************************************************************************* @@ -267,9 +297,50 @@ static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irqdesc *desc, str } } +static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type) +{ + int line = irq - IRQ_IXP2000_GPIO0; + + /* + * First, configure this GPIO line as an input. + */ + ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line); + + /* + * Then, set the proper trigger type. + */ + if (type & IRQT_FALLING) + GPIO_IRQ_falling_edge |= 1 << line; + else + GPIO_IRQ_falling_edge &= ~(1 << line); + if (type & IRQT_RISING) + GPIO_IRQ_rising_edge |= 1 << line; + else + GPIO_IRQ_rising_edge &= ~(1 << line); + if (type & IRQT_LOW) + GPIO_IRQ_level_low |= 1 << line; + else + GPIO_IRQ_level_low &= ~(1 << line); + if (type & IRQT_HIGH) + GPIO_IRQ_level_high |= 1 << line; + else + GPIO_IRQ_level_high &= ~(1 << line); + update_gpio_int_csrs(); + + /* + * Finally, mark the corresponding IRQ as valid. + */ + irq_desc[irq].valid = 1; + + return 0; +} + static void ixp2000_GPIO_irq_mask_ack(unsigned int irq) { ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0))); + + ixp2000_reg_write(IXP2000_GPIO_EDSR, (1 << (irq - IRQ_IXP2000_GPIO0))); + ixp2000_reg_write(IXP2000_GPIO_LDSR, (1 << (irq - IRQ_IXP2000_GPIO0))); ixp2000_reg_write(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0))); } @@ -284,6 +355,7 @@ static void ixp2000_GPIO_irq_unmask(unsigned int irq) } static struct irqchip ixp2000_GPIO_irq_chip = { + .type = ixp2000_GPIO_irq_type, .ack = ixp2000_GPIO_irq_mask_ack, .mask = ixp2000_GPIO_irq_mask, .unmask = ixp2000_GPIO_irq_unmask @@ -320,7 +392,7 @@ static void ixp2000_irq_mask(unsigned int irq) static void ixp2000_irq_unmask(unsigned int irq) { - ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << irq)); + ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << irq)); } static struct irqchip ixp2000_irq_chip = { @@ -357,16 +429,16 @@ void __init ixp2000_init_irq(void) * our mask/unmask code much simpler. */ for (irq = IRQ_IXP2000_SOFT_INT; irq <= IRQ_IXP2000_THDB3; irq++) { - if((1 << irq) & IXP2000_VALID_IRQ_MASK) { + if ((1 << irq) & IXP2000_VALID_IRQ_MASK) { set_irq_chip(irq, &ixp2000_irq_chip); set_irq_handler(irq, do_level_IRQ); set_irq_flags(irq, IRQF_VALID); } else set_irq_flags(irq, 0); } - + /* * GPIO IRQs are invalid until someone sets the interrupt mode - * by calling gpio_line_set(); + * by calling set_irq_type(). */ for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) { set_irq_chip(irq, &ixp2000_GPIO_irq_chip); diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index 04b38bc..f3a291b 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -197,8 +197,23 @@ static struct platform_device enp2611_flash = { .resource = &enp2611_flash_resource, }; +static struct ixp2000_i2c_pins enp2611_i2c_gpio_pins = { + .sda_pin = ENP2611_GPIO_SDA, + .scl_pin = ENP2611_GPIO_SCL, +}; + +static struct platform_device enp2611_i2c_controller = { + .name = "IXP2000-I2C", + .id = 0, + .dev = { + .platform_data = &enp2611_i2c_gpio_pins + }, + .num_resources = 0 +}; + static struct platform_device *enp2611_devices[] __initdata = { - &enp2611_flash + &enp2611_flash, + &enp2611_i2c_controller }; static void __init enp2611_init_machine(void) diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c index aec13c7..468a4bb 100644 --- a/arch/arm/mach-ixp2000/ixdp2800.c +++ b/arch/arm/mach-ixp2000/ixdp2800.c @@ -42,12 +42,6 @@ #include <asm/mach/flash.h> #include <asm/mach/arch.h> - -void ixdp2400_init_irq(void) -{ - ixdp2x00_init_irq(IXDP2800_CPLD_INT_STAT, IXDP2800_CPLD_INT_MASK, IXDP2400_NR_IRQS); -} - /************************************************************************* * IXDP2800 timer tick *************************************************************************/ diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c index 21c41fe..5e43807 100644 --- a/arch/arm/mach-ixp2000/ixdp2x00.c +++ b/arch/arm/mach-ixp2000/ixdp2x00.c @@ -42,6 +42,9 @@ #include <asm/mach/flash.h> #include <asm/mach/arch.h> +#include <asm/arch/gpio.h> + + /************************************************************************* * IXDP2x00 IRQ Initialization *************************************************************************/ diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c index 5ff2f27..0788fb2 100644 --- a/arch/arm/mach-ixp2000/pci.c +++ b/arch/arm/mach-ixp2000/pci.c @@ -198,6 +198,19 @@ clear_master_aborts(void) void __init ixp2000_pci_preinit(void) { +#ifndef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO + /* + * Configure the PCI unit to properly byteswap I/O transactions, + * and verify that it worked. + */ + ixp2000_reg_write(IXP2000_PCI_CONTROL, + (*IXP2000_PCI_CONTROL | PCI_CONTROL_IEE)); + + if ((*IXP2000_PCI_CONTROL & PCI_CONTROL_IEE) == 0) + panic("IXP2000: PCI I/O is broken on this ixp model, and " + "the needed workaround has not been configured in"); +#endif + hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS, "PCI config cycle to non-existent device"); } diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 267ba02..04490a9 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -141,7 +141,15 @@ static struct map_desc ixp4xx_io_desc[] __initdata = { .physical = IXP4XX_PCI_CFG_BASE_PHYS, .length = IXP4XX_PCI_CFG_REGION_SIZE, .type = MT_DEVICE + }, +#ifdef CONFIG_DEBUG_LL + { /* Debug UART mapping */ + .virtual = IXP4XX_DEBUG_UART_BASE_VIRT, + .physical = IXP4XX_DEBUG_UART_BASE_PHYS, + .length = IXP4XX_DEBUG_UART_REGION_SIZE, + .type = MT_DEVICE } +#endif }; void __init ixp4xx_map_io(void) @@ -290,8 +298,8 @@ static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs static struct irqaction ixp4xx_timer_irq = { .name = "IXP4xx Timer Tick", - .flags = SA_INTERRUPT, - .handler = ixp4xx_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = ixp4xx_timer_interrupt, }; static void __init ixp4xx_timer_init(void) diff --git a/arch/arm/mach-lh7a40x/time.c b/arch/arm/mach-lh7a40x/time.c index 51e1c81..be377e3 100644 --- a/arch/arm/mach-lh7a40x/time.c +++ b/arch/arm/mach-lh7a40x/time.c @@ -53,8 +53,8 @@ lh7a40x_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction lh7a40x_timer_irq = { .name = "LHA740x Timer Tick", - .flags = SA_INTERRUPT, - .handler = lh7a40x_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = lh7a40x_timer_interrupt, }; static void __init lh7a40x_timer_init(void) diff --git a/arch/arm/mach-omap/pm.c b/arch/arm/mach-omap/pm.c index 00fac15..6b03ccd 100644 --- a/arch/arm/mach-omap/pm.c +++ b/arch/arm/mach-omap/pm.c @@ -41,7 +41,9 @@ #include <linux/pm.h> #include <asm/io.h> +#include <asm/mach/time.h> #include <asm/mach-types.h> + #include <asm/arch/omap16xx.h> #include <asm/arch/pm.h> #include <asm/arch/mux.h> @@ -80,13 +82,13 @@ void omap_pm_idle(void) return; } mask32 = omap_readl(ARM_SYSST); - local_fiq_enable(); - local_irq_enable(); -#if defined(CONFIG_OMAP_32K_TIMER) && defined(CONFIG_NO_IDLE_HZ) - /* Override timer to use VST for the next cycle */ - omap_32k_timer_next_vst_interrupt(); -#endif + /* + * Since an interrupt may set up a timer, we don't want to + * reprogram the hardware timer with interrupts enabled. + * Re-enable interrupts only after returning from idle. + */ + timer_dyn_reprogram(); if ((mask32 & DSP_IDLE) == 0) { __asm__ volatile ("mcr p15, 0, r0, c7, c0, 4"); @@ -102,6 +104,8 @@ void omap_pm_idle(void) func_ptr(); } + local_fiq_enable(); + local_irq_enable(); } /* diff --git a/arch/arm/mach-omap/time.c b/arch/arm/mach-omap/time.c index 4205fdc..dd34e9f 100644 --- a/arch/arm/mach-omap/time.c +++ b/arch/arm/mach-omap/time.c @@ -4,7 +4,7 @@ * OMAP Timers * * Copyright (C) 2004 Nokia Corporation - * Partial timer rewrite and additional VST timer support by + * Partial timer rewrite and additional dynamic tick timer support by * Tony Lindgen <tony@atomide.com> and * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> * @@ -188,8 +188,8 @@ static irqreturn_t omap_mpu_timer_interrupt(int irq, void *dev_id, static struct irqaction omap_mpu_timer_irq = { .name = "mpu timer", - .flags = SA_INTERRUPT, - .handler = omap_mpu_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = omap_mpu_timer_interrupt, }; static unsigned long omap_mpu_timer1_overflows; @@ -203,7 +203,7 @@ static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id, static struct irqaction omap_mpu_timer1_irq = { .name = "mpu timer1 overflow", .flags = SA_INTERRUPT, - .handler = omap_mpu_timer1_interrupt + .handler = omap_mpu_timer1_interrupt, }; static __init void omap_init_mpu_timer(void) @@ -261,7 +261,6 @@ unsigned long long sched_clock(void) * so with HZ = 100, TVR = 327.68. */ #define OMAP_32K_TIMER_TICK_PERIOD ((32768 / HZ) - 1) -#define MAX_SKIP_JIFFIES 25 #define TIMER_32K_SYNCHRONIZED 0xfffbc410 #define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate) \ @@ -347,14 +346,55 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id, return IRQ_HANDLED; } +#ifdef CONFIG_NO_IDLE_HZ +/* + * Programs the next timer interrupt needed. Called when dynamic tick is + * enabled, and to reprogram the ticks to skip from pm_idle. Note that + * we can keep the timer continuous, and don't need to set it to run in + * one-shot mode. This is because the timer will get reprogrammed again + * after next interrupt. + */ +void omap_32k_timer_reprogram(unsigned long next_tick) +{ + omap_32k_timer_start(JIFFIES_TO_HW_TICKS(next_tick, 32768) + 1); +} + +static struct irqaction omap_32k_timer_irq; +extern struct timer_update_handler timer_update; + +static int omap_32k_timer_enable_dyn_tick(void) +{ + /* No need to reprogram timer, just use the next interrupt */ + return 0; +} + +static int omap_32k_timer_disable_dyn_tick(void) +{ + omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD); + return 0; +} + +static struct dyn_tick_timer omap_dyn_tick_timer = { + .enable = omap_32k_timer_enable_dyn_tick, + .disable = omap_32k_timer_disable_dyn_tick, + .reprogram = omap_32k_timer_reprogram, + .handler = omap_32k_timer_interrupt, +}; +#endif /* CONFIG_NO_IDLE_HZ */ + static struct irqaction omap_32k_timer_irq = { .name = "32KHz timer", - .flags = SA_INTERRUPT, - .handler = omap_32k_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = omap_32k_timer_interrupt, }; static __init void omap_init_32k_timer(void) { + +#ifdef CONFIG_NO_IDLE_HZ + omap_timer.dyn_tick = &omap_dyn_tick_timer; +#endif + setup_irq(INT_OS_TIMER, &omap_32k_timer_irq); omap_timer.offset = omap_32k_timer_gettimeoffset; omap_32k_last_tick = omap_32k_sync_timer_read(); diff --git a/arch/arm/mach-omap/usb.c b/arch/arm/mach-omap/usb.c index 6e805d4..7f37857 100644 --- a/arch/arm/mach-omap/usb.c +++ b/arch/arm/mach-omap/usb.c @@ -288,8 +288,8 @@ static void usb_release(struct device *dev) static struct resource udc_resources[] = { /* order is significant! */ { /* registers */ - .start = IO_ADDRESS(UDC_BASE), - .end = IO_ADDRESS(UDC_BASE + 0xff), + .start = UDC_BASE, + .end = UDC_BASE + 0xff, .flags = IORESOURCE_MEM, }, { /* general IRQ */ .start = IH2_BASE + 20, @@ -355,8 +355,8 @@ static struct platform_device ohci_device = { static struct resource otg_resources[] = { /* order is significant! */ { - .start = IO_ADDRESS(OTG_BASE), - .end = IO_ADDRESS(OTG_BASE + 0xff), + .start = OTG_BASE, + .end = OTG_BASE + 0xff, .flags = IORESOURCE_MEM, }, { .start = IH2_BASE + 8, diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 473fb61..6e52021 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -105,8 +105,8 @@ pxa_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction pxa_timer_irq = { .name = "PXA Timer Tick", - .flags = SA_INTERRUPT, - .handler = pxa_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = pxa_timer_interrupt, }; static void __init pxa_timer_init(void) diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c index 815c532..4371068 100644 --- a/arch/arm/mach-rpc/riscpc.c +++ b/arch/arm/mach-rpc/riscpc.c @@ -32,10 +32,7 @@ extern void rpc_init_irq(void); -extern unsigned int vram_size; - -#if 0 - +unsigned int vram_size; unsigned int memc_ctrl_reg; unsigned int number_mfm_drives; @@ -63,8 +60,6 @@ static int __init parse_tag_acorn(const struct tag *tag) __tagtable(ATAG_ACORN, parse_tag_acorn); -#endif - static struct map_desc rpc_io_desc[] __initdata = { { SCREEN_BASE, SCREEN_START, 2*1048576, MT_DEVICE }, /* VRAM */ { (u32)IO_BASE, IO_START, IO_SIZE , MT_DEVICE }, /* IO space */ diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 534df0c..d4d03d0 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -154,6 +154,11 @@ config S3C2410_PM_CHECK_CHUNKSIZE the CRC data block will take more memory, but wil identify any faults with better precision. +config PM_SIMTEC + bool + depends on PM && (ARCH_BAST || MACH_VR1000) + default y + config S3C2410_LOWLEVEL_UART_PORT int "S3C2410 UART to use for low-level messages" default 0 diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 7c379aa..f99b689 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_S3C2410_DMA) += dma.o # Power Management support obj-$(CONFIG_PM) += pm.o sleep.o +obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o # S3C2440 support diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c index 64792f6..4664bd1 100644 --- a/arch/arm/mach-s3c2410/devs.c +++ b/arch/arm/mach-s3c2410/devs.c @@ -96,8 +96,8 @@ struct platform_device s3c_device_lcd = { .num_resources = ARRAY_SIZE(s3c_lcd_resource), .resource = s3c_lcd_resource, .dev = { - .dma_mask = &s3c_device_lcd_dmamask, - .coherent_dma_mask = 0xffffffffUL + .dma_mask = &s3c_device_lcd_dmamask, + .coherent_dma_mask = 0xffffffffUL } }; diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c index b668c48..cf9f46d 100644 --- a/arch/arm/mach-s3c2410/irq.c +++ b/arch/arm/mach-s3c2410/irq.c @@ -40,8 +40,11 @@ * 04-Nov-2004 Ben Dooks * Fix standard IRQ wake for EINT0..4 and RTC * - * 22-Feb-2004 Ben Dooks + * 22-Feb-2005 Ben Dooks * Fixed edge-triggering on ADC IRQ + * + * 28-Jun-2005 Ben Dooks + * Mark IRQ_LCD valid */ #include <linux/init.h> @@ -366,7 +369,6 @@ static struct irqchip s3c_irq_eint0t4 = { #define INTMSK_UART1 (1UL << (IRQ_UART1 - IRQ_EINT0)) #define INTMSK_UART2 (1UL << (IRQ_UART2 - IRQ_EINT0)) #define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0)) -#define INTMSK_LCD (1UL << (IRQ_LCD - IRQ_EINT0)) static inline void s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit, @@ -716,7 +718,6 @@ void __init s3c24xx_init_irq(void) case IRQ_UART0: case IRQ_UART1: case IRQ_UART2: - case IRQ_LCD: case IRQ_ADCPARENT: set_irq_chip(irqno, &s3c_irq_level_chip); set_irq_handler(irqno, do_level_IRQ); diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 3bb97eb..549bcb1 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -26,6 +26,8 @@ * 03-Mar-2005 BJD Ensured that bast-cpld.h is included * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA * 14-Mar-2006 BJD Updated for __iomem changes + * 22-Jun-2006 BJD Added DM9000 platform information + * 28-Jun-2006 BJD Moved pm functionality out to common code */ #include <linux/kernel.h> @@ -35,6 +37,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/device.h> +#include <linux/dm9000.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -53,6 +56,7 @@ #include <asm/arch/regs-serial.h> #include <asm/arch/regs-gpio.h> #include <asm/arch/regs-mem.h> +#include <asm/arch/regs-lcd.h> #include <asm/arch/nand.h> #include <linux/mtd/mtd.h> @@ -64,7 +68,6 @@ #include "devs.h" #include "cpu.h" #include "usb-simtec.h" -#include "pm.h" #define COPYRIGHT ", (c) 2004-2005 Simtec Electronics" @@ -112,7 +115,6 @@ static struct map_desc bast_iodesc[] __initdata = { { VA_C2(BAST_VA_ISAMEM), PA_CS2(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE }, { VA_C2(BAST_VA_ASIXNET), PA_CS3(BAST_PA_ASIXNET), SZ_1M, MT_DEVICE }, { VA_C2(BAST_VA_SUPERIO), PA_CS2(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE }, - { VA_C2(BAST_VA_DM9000), PA_CS2(BAST_PA_DM9000), SZ_1M, MT_DEVICE }, { VA_C2(BAST_VA_IDEPRI), PA_CS3(BAST_PA_IDEPRI), SZ_1M, MT_DEVICE }, { VA_C2(BAST_VA_IDESEC), PA_CS3(BAST_PA_IDESEC), SZ_1M, MT_DEVICE }, { VA_C2(BAST_VA_IDEPRIAUX), PA_CS3(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE }, @@ -123,7 +125,6 @@ static struct map_desc bast_iodesc[] __initdata = { { VA_C3(BAST_VA_ISAMEM), PA_CS3(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE }, { VA_C3(BAST_VA_ASIXNET), PA_CS3(BAST_PA_ASIXNET), SZ_1M, MT_DEVICE }, { VA_C3(BAST_VA_SUPERIO), PA_CS3(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE }, - { VA_C3(BAST_VA_DM9000), PA_CS3(BAST_PA_DM9000), SZ_1M, MT_DEVICE }, { VA_C3(BAST_VA_IDEPRI), PA_CS3(BAST_PA_IDEPRI), SZ_1M, MT_DEVICE }, { VA_C3(BAST_VA_IDESEC), PA_CS3(BAST_PA_IDESEC), SZ_1M, MT_DEVICE }, { VA_C3(BAST_VA_IDEPRIAUX), PA_CS3(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE }, @@ -134,7 +135,6 @@ static struct map_desc bast_iodesc[] __initdata = { { VA_C4(BAST_VA_ISAMEM), PA_CS4(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE }, { VA_C4(BAST_VA_ASIXNET), PA_CS5(BAST_PA_ASIXNET), SZ_1M, MT_DEVICE }, { VA_C4(BAST_VA_SUPERIO), PA_CS4(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE }, - { VA_C4(BAST_VA_DM9000), PA_CS4(BAST_PA_DM9000), SZ_1M, MT_DEVICE }, { VA_C4(BAST_VA_IDEPRI), PA_CS5(BAST_PA_IDEPRI), SZ_1M, MT_DEVICE }, { VA_C4(BAST_VA_IDESEC), PA_CS5(BAST_PA_IDESEC), SZ_1M, MT_DEVICE }, { VA_C4(BAST_VA_IDEPRIAUX), PA_CS5(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE }, @@ -145,7 +145,6 @@ static struct map_desc bast_iodesc[] __initdata = { { VA_C5(BAST_VA_ISAMEM), PA_CS5(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE }, { VA_C5(BAST_VA_ASIXNET), PA_CS5(BAST_PA_ASIXNET), SZ_1M, MT_DEVICE }, { VA_C5(BAST_VA_SUPERIO), PA_CS5(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE }, - { VA_C5(BAST_VA_DM9000), PA_CS5(BAST_PA_DM9000), SZ_1M, MT_DEVICE }, { VA_C5(BAST_VA_IDEPRI), PA_CS5(BAST_PA_IDEPRI), SZ_1M, MT_DEVICE }, { VA_C5(BAST_VA_IDESEC), PA_CS5(BAST_PA_IDESEC), SZ_1M, MT_DEVICE }, { VA_C5(BAST_VA_IDEPRIAUX), PA_CS5(BAST_PA_IDEPRIAUX), SZ_1M, MT_DEVICE }, @@ -313,6 +312,45 @@ static struct s3c2410_platform_nand bast_nand_info = { .select_chip = bast_nand_select, }; +/* DM9000 */ + +static struct resource bast_dm9k_resource[] = { + [0] = { + .start = S3C2410_CS5 + BAST_PA_DM9000, + .end = S3C2410_CS5 + BAST_PA_DM9000 + 3, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = S3C2410_CS5 + BAST_PA_DM9000 + 0x40, + .end = S3C2410_CS5 + BAST_PA_DM9000 + 0x40 + 0x3f, + .flags = IORESOURCE_MEM + }, + [2] = { + .start = IRQ_DM9000, + .end = IRQ_DM9000, + .flags = IORESOURCE_IRQ + } + +}; + +/* for the moment we limit ourselves to 16bit IO until some + * better IO routines can be written and tested +*/ + +struct dm9000_plat_data bast_dm9k_platdata = { + .flags = DM9000_PLATF_16BITONLY +}; + +static struct platform_device bast_device_dm9k = { + .name = "dm9000", + .id = 0, + .num_resources = ARRAY_SIZE(bast_dm9k_resource), + .resource = bast_dm9k_resource, + .dev = { + .platform_data = &bast_dm9k_platdata, + } +}; + /* Standard BAST devices */ @@ -324,7 +362,8 @@ static struct platform_device *bast_devices[] __initdata = { &s3c_device_iis, &s3c_device_rtc, &s3c_device_nand, - &bast_device_nor + &bast_device_nor, + &bast_device_dm9k, }; static struct clk *bast_clocks[] = { @@ -366,44 +405,13 @@ void __init bast_map_io(void) usb_simtec_init(); } -void __init bast_init_irq(void) -{ - s3c24xx_init_irq(); -} - -#ifdef CONFIG_PM - -/* bast_init_machine - * - * enable the power management functions for the EB2410ITX -*/ - -static __init void bast_init_machine(void) -{ - unsigned long gstatus4; - - printk(KERN_INFO "BAST Power Manangement" COPYRIGHT "\n"); - - gstatus4 = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30; - gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28; - gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK); - - __raw_writel(gstatus4, S3C2410_GSTATUS4); - - s3c2410_pm_init(); -} - -#else -#define bast_init_machine NULL -#endif - MACHINE_START(BAST, "Simtec-BAST") MAINTAINER("Ben Dooks <ben@simtec.co.uk>") BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) - MAPIO(bast_map_io) - INITIRQ(bast_init_irq) - .init_machine = bast_init_machine, + + .map_io = bast_map_io, + .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 5512146..1db2855 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -27,6 +27,7 @@ * 10-Feb-2005 BJD Added power-off capability * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA * 14-Mar-2006 BJD void __iomem fixes + * 22-Jun-2006 BJD Added DM9000 platform information */ #include <linux/kernel.h> @@ -35,6 +36,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/dm9000.h> #include <linux/serial.h> #include <linux/tty.h> @@ -98,28 +100,24 @@ static struct map_desc vr1000_iodesc[] __initdata = { * are only 8bit */ /* slow, byte */ - { VA_C2(VR1000_VA_DM9000), PA_CS2(VR1000_PA_DM9000), SZ_1M, MT_DEVICE }, { VA_C2(VR1000_VA_IDEPRI), PA_CS3(VR1000_PA_IDEPRI), SZ_1M, MT_DEVICE }, { VA_C2(VR1000_VA_IDESEC), PA_CS3(VR1000_PA_IDESEC), SZ_1M, MT_DEVICE }, { VA_C2(VR1000_VA_IDEPRIAUX), PA_CS3(VR1000_PA_IDEPRIAUX), SZ_1M, MT_DEVICE }, { VA_C2(VR1000_VA_IDESECAUX), PA_CS3(VR1000_PA_IDESECAUX), SZ_1M, MT_DEVICE }, /* slow, word */ - { VA_C3(VR1000_VA_DM9000), PA_CS3(VR1000_PA_DM9000), SZ_1M, MT_DEVICE }, { VA_C3(VR1000_VA_IDEPRI), PA_CS3(VR1000_PA_IDEPRI), SZ_1M, MT_DEVICE }, { VA_C3(VR1000_VA_IDESEC), PA_CS3(VR1000_PA_IDESEC), SZ_1M, MT_DEVICE }, { VA_C3(VR1000_VA_IDEPRIAUX), PA_CS3(VR1000_PA_IDEPRIAUX), SZ_1M, MT_DEVICE }, { VA_C3(VR1000_VA_IDESECAUX), PA_CS3(VR1000_PA_IDESECAUX), SZ_1M, MT_DEVICE }, /* fast, byte */ - { VA_C4(VR1000_VA_DM9000), PA_CS4(VR1000_PA_DM9000), SZ_1M, MT_DEVICE }, { VA_C4(VR1000_VA_IDEPRI), PA_CS5(VR1000_PA_IDEPRI), SZ_1M, MT_DEVICE }, { VA_C4(VR1000_VA_IDESEC), PA_CS5(VR1000_PA_IDESEC), SZ_1M, MT_DEVICE }, { VA_C4(VR1000_VA_IDEPRIAUX), PA_CS5(VR1000_PA_IDEPRIAUX), SZ_1M, MT_DEVICE }, { VA_C4(VR1000_VA_IDESECAUX), PA_CS5(VR1000_PA_IDESECAUX), SZ_1M, MT_DEVICE }, /* fast, word */ - { VA_C5(VR1000_VA_DM9000), PA_CS5(VR1000_PA_DM9000), SZ_1M, MT_DEVICE }, { VA_C5(VR1000_VA_IDEPRI), PA_CS5(VR1000_PA_IDEPRI), SZ_1M, MT_DEVICE }, { VA_C5(VR1000_VA_IDESEC), PA_CS5(VR1000_PA_IDESEC), SZ_1M, MT_DEVICE }, { VA_C5(VR1000_VA_IDEPRIAUX), PA_CS5(VR1000_PA_IDEPRIAUX), SZ_1M, MT_DEVICE }, @@ -246,6 +244,74 @@ static struct platform_device vr1000_nor = { .resource = vr1000_nor_resource, }; +/* DM9000 ethernet devices */ + +static struct resource vr1000_dm9k0_resource[] = { + [0] = { + .start = S3C2410_CS5 + VR1000_PA_DM9000, + .end = S3C2410_CS5 + VR1000_PA_DM9000 + 3, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = S3C2410_CS5 + VR1000_PA_DM9000 + 0x40, + .end = S3C2410_CS5 + VR1000_PA_DM9000 + 0x7f, + .flags = IORESOURCE_MEM + }, + [2] = { + .start = IRQ_VR1000_DM9000A, + .end = IRQ_VR1000_DM9000A, + .flags = IORESOURCE_IRQ + } + +}; + +static struct resource vr1000_dm9k1_resource[] = { + [0] = { + .start = S3C2410_CS5 + VR1000_PA_DM9000 + 0x80, + .end = S3C2410_CS5 + VR1000_PA_DM9000 + 0x83, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = S3C2410_CS5 + VR1000_PA_DM9000 + 0xC0, + .end = S3C2410_CS5 + VR1000_PA_DM9000 + 0xFF, + .flags = IORESOURCE_MEM + }, + [2] = { + .start = IRQ_VR1000_DM9000N, + .end = IRQ_VR1000_DM9000N, + .flags = IORESOURCE_IRQ + } +}; + +/* for the moment we limit ourselves to 16bit IO until some + * better IO routines can be written and tested +*/ + +struct dm9000_plat_data vr1000_dm9k_platdata = { + .flags = DM9000_PLATF_16BITONLY, +}; + +static struct platform_device vr1000_dm9k0 = { + .name = "dm9000", + .id = 0, + .num_resources = ARRAY_SIZE(vr1000_dm9k0_resource), + .resource = vr1000_dm9k0_resource, + .dev = { + .platform_data = &vr1000_dm9k_platdata, + } +}; + +static struct platform_device vr1000_dm9k1 = { + .name = "dm9000", + .id = 1, + .num_resources = ARRAY_SIZE(vr1000_dm9k1_resource), + .resource = vr1000_dm9k1_resource, + .dev = { + .platform_data = &vr1000_dm9k_platdata, + } +}; + +/* devices for this board */ static struct platform_device *vr1000_devices[] __initdata = { &s3c_device_usb, @@ -253,8 +319,11 @@ static struct platform_device *vr1000_devices[] __initdata = { &s3c_device_wdt, &s3c_device_i2c, &s3c_device_iis, + &s3c_device_adc, &serial_device, &vr1000_nor, + &vr1000_dm9k0, + &vr1000_dm9k1 }; static struct clk *vr1000_clocks[] = { @@ -302,16 +371,12 @@ void __init vr1000_map_io(void) usb_simtec_init(); } -void __init vr1000_init_irq(void) -{ - s3c24xx_init_irq(); -} MACHINE_START(VR1000, "Thorcom-VR1000") MAINTAINER("Ben Dooks <ben@simtec.co.uk>") BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) - MAPIO(vr1000_map_io) - INITIRQ(vr1000_init_irq) + .map_io = vr1000_map_io, + .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/mach-s3c2410/pm-simtec.c new file mode 100644 index 0000000..2cb7988 --- /dev/null +++ b/arch/arm/mach-s3c2410/pm-simtec.c @@ -0,0 +1,65 @@ +/* linux/arch/arm/mach-s3c2410/pm-simtec.c + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * http://armlinux.simtec.co.uk/ + * + * Power Management helpers for Simtec S3C24XX implementations + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/device.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <asm/hardware.h> +#include <asm/io.h> + +#include <asm/arch/map.h> +#include <asm/arch/regs-serial.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-mem.h> + +#include <asm/mach-types.h> + +#include "pm.h" + +#define COPYRIGHT ", (c) 2005 Simtec Electronics" + +/* pm_simtec_init + * + * enable the power management functions +*/ + +static __init int pm_simtec_init(void) +{ + unsigned long gstatus4; + + /* check which machine we are running on */ + + if (!machine_is_bast() && !machine_is_vr1000()) + return 0; + + printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n"); + + gstatus4 = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30; + gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28; + gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK); + + __raw_writel(gstatus4, S3C2410_GSTATUS4); + + return s3c2410_pm_init(); +} + +arch_initcall(pm_simtec_init); diff --git a/arch/arm/mach-s3c2410/time.c b/arch/arm/mach-s3c2410/time.c index 179f0e0..765a3a9 100644 --- a/arch/arm/mach-s3c2410/time.c +++ b/arch/arm/mach-s3c2410/time.c @@ -137,8 +137,8 @@ s3c2410_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction s3c2410_timer_irq = { .name = "S3C2410 Timer Tick", - .flags = SA_INTERRUPT, - .handler = s3c2410_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = s3c2410_timer_interrupt, }; /* diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index 84c8654..65dbe99 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -727,7 +727,7 @@ static void h3800_IRQ_demux(unsigned int irq, struct irqdesc *desc, struct pt_re static struct irqaction h3800_irq = { .name = "h3800_asic", .handler = h3800_IRQ_demux, - .flags = SA_INTERRUPT, + .flags = SA_INTERRUPT | SA_TIMER, }; u32 kpio_int_shadow = 0; diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 19b0c0f..0eeb361 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -99,8 +99,8 @@ sa1100_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction sa1100_timer_irq = { .name = "SA11xx Timer Tick", - .flags = SA_INTERRUPT, - .handler = sa1100_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = sa1100_timer_interrupt, }; static void __init sa1100_timer_init(void) diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index a9bc5d0..aa0e2f6 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -84,8 +84,8 @@ shark_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) static struct irqaction shark_timer_irq = { .name = "Shark Timer Tick", - .flags = SA_INTERRUPT, - .handler = shark_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = shark_timer_interrupt, }; /* diff --git a/arch/arm/mach-versatile/Makefile b/arch/arm/mach-versatile/Makefile index 5d60883..ba81e70 100644 --- a/arch/arm/mach-versatile/Makefile +++ b/arch/arm/mach-versatile/Makefile @@ -5,3 +5,4 @@ obj-y := core.o clock.o obj-$(CONFIG_ARCH_VERSATILE_PB) += versatile_pb.o obj-$(CONFIG_MACH_VERSATILE_AB) += versatile_ab.o +obj-$(CONFIG_PCI) += pci.o diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 302c2a7..f01c0f8 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -33,6 +33,7 @@ #include <asm/mach-types.h> #include <asm/hardware/amba.h> #include <asm/hardware/amba_clcd.h> +#include <asm/hardware/arm_timer.h> #include <asm/hardware/icst307.h> #include <asm/mach/arch.h> @@ -196,11 +197,15 @@ static struct map_desc versatile_io_desc[] __initdata = { #ifdef CONFIG_DEBUG_LL { IO_ADDRESS(VERSATILE_UART0_BASE), VERSATILE_UART0_BASE, SZ_4K, MT_DEVICE }, #endif -#ifdef FIXME - { PCI_MEMORY_VADDR, PHYS_PCI_MEM_BASE, SZ_16M, MT_DEVICE }, - { PCI_CONFIG_VADDR, PHYS_PCI_CONFIG_BASE, SZ_16M, MT_DEVICE }, - { PCI_V3_VADDR, PHYS_PCI_V3_BASE, SZ_512K, MT_DEVICE }, - { PCI_IO_VADDR, PHYS_PCI_IO_BASE, SZ_64K, MT_DEVICE }, +#ifdef CONFIG_PCI + { IO_ADDRESS(VERSATILE_PCI_CORE_BASE), VERSATILE_PCI_CORE_BASE, SZ_4K, MT_DEVICE }, + { VERSATILE_PCI_VIRT_BASE, VERSATILE_PCI_BASE, VERSATILE_PCI_BASE_SIZE, MT_DEVICE }, + { VERSATILE_PCI_CFG_VIRT_BASE, VERSATILE_PCI_CFG_BASE, VERSATILE_PCI_CFG_BASE_SIZE, MT_DEVICE }, +#if 0 + { VERSATILE_PCI_VIRT_MEM_BASE0, VERSATILE_PCI_MEM_BASE0, SZ_16M, MT_DEVICE }, + { VERSATILE_PCI_VIRT_MEM_BASE1, VERSATILE_PCI_MEM_BASE1, SZ_16M, MT_DEVICE }, + { VERSATILE_PCI_VIRT_MEM_BASE2, VERSATILE_PCI_MEM_BASE2, SZ_16M, MT_DEVICE }, +#endif #endif }; @@ -784,38 +789,25 @@ void __init versatile_init(void) */ #define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10) #if TIMER_INTERVAL >= 0x100000 -#define TIMER_RELOAD (TIMER_INTERVAL >> 8) /* Divide by 256 */ -#define TIMER_CTRL 0x88 /* Enable, Clock / 256 */ +#define TIMER_RELOAD (TIMER_INTERVAL >> 8) +#define TIMER_DIVISOR (TIMER_CTRL_DIV256) #define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC) #elif TIMER_INTERVAL >= 0x10000 #define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */ -#define TIMER_CTRL 0x84 /* Enable, Clock / 16 */ +#define TIMER_DIVISOR (TIMER_CTRL_DIV16) #define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC) #else #define TIMER_RELOAD (TIMER_INTERVAL) -#define TIMER_CTRL 0x80 /* Enable */ +#define TIMER_DIVISOR (TIMER_CTRL_DIV1) #define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) #endif -#define TIMER_CTRL_IE (1 << 5) /* Interrupt Enable */ - -/* - * What does it look like? - */ -typedef struct TimerStruct { - unsigned long TimerLoad; - unsigned long TimerValue; - unsigned long TimerControl; - unsigned long TimerClear; -} TimerStruct_t; - /* * Returns number of ms since last clock interrupt. Note that interrupts * will have been disabled by do_gettimeoffset() */ static unsigned long versatile_gettimeoffset(void) { - volatile TimerStruct_t *timer0 = (TimerStruct_t *)TIMER0_VA_BASE; unsigned long ticks1, ticks2, status; /* @@ -824,11 +816,11 @@ static unsigned long versatile_gettimeoffset(void) * an interrupt. We get around this by ensuring that the * counter has not reloaded between our two reads. */ - ticks2 = timer0->TimerValue & 0xffff; + ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff; do { ticks1 = ticks2; status = __raw_readl(VA_IC_BASE + VIC_IRQ_RAW_STATUS); - ticks2 = timer0->TimerValue & 0xffff; + ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff; } while (ticks2 > ticks1); /* @@ -855,12 +847,10 @@ static unsigned long versatile_gettimeoffset(void) */ static irqreturn_t versatile_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { - volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE; - write_seqlock(&xtime_lock); // ...clear the interrupt - timer0->TimerClear = 1; + writel(1, TIMER0_VA_BASE + TIMER_INTCLR); timer_tick(regs); @@ -871,8 +861,8 @@ static irqreturn_t versatile_timer_interrupt(int irq, void *dev_id, struct pt_re static struct irqaction versatile_timer_irq = { .name = "Versatile Timer Tick", - .flags = SA_INTERRUPT, - .handler = versatile_timer_interrupt + .flags = SA_INTERRUPT | SA_TIMER, + .handler = versatile_timer_interrupt, }; /* @@ -880,31 +870,32 @@ static struct irqaction versatile_timer_irq = { */ static void __init versatile_timer_init(void) { - volatile TimerStruct_t *timer0 = (volatile TimerStruct_t *)TIMER0_VA_BASE; - volatile TimerStruct_t *timer1 = (volatile TimerStruct_t *)TIMER1_VA_BASE; - volatile TimerStruct_t *timer2 = (volatile TimerStruct_t *)TIMER2_VA_BASE; - volatile TimerStruct_t *timer3 = (volatile TimerStruct_t *)TIMER3_VA_BASE; + u32 val; /* * set clock frequency: * VERSATILE_REFCLK is 32KHz * VERSATILE_TIMCLK is 1MHz */ - *(volatile unsigned int *)IO_ADDRESS(VERSATILE_SCTL_BASE) |= - ((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | - (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel)); + val = readl(IO_ADDRESS(VERSATILE_SCTL_BASE)); + writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) | + (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) | + (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) | + (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val, + IO_ADDRESS(VERSATILE_SCTL_BASE)); /* * Initialise to a known state (all timers off) */ - timer0->TimerControl = 0; - timer1->TimerControl = 0; - timer2->TimerControl = 0; - timer3->TimerControl = 0; - - timer0->TimerLoad = TIMER_RELOAD; - timer0->TimerValue = TIMER_RELOAD; - timer0->TimerControl = TIMER_CTRL | 0x40 | TIMER_CTRL_IE; /* periodic + IE */ + writel(0, TIMER0_VA_BASE + TIMER_CTRL); + writel(0, TIMER1_VA_BASE + TIMER_CTRL); + writel(0, TIMER2_VA_BASE + TIMER_CTRL); + writel(0, TIMER3_VA_BASE + TIMER_CTRL); + + writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD); + writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_VALUE); + writel(TIMER_DIVISOR | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC | + TIMER_CTRL_IE, TIMER0_VA_BASE + TIMER_CTRL); /* * Make irqs happen for the system timer diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c new file mode 100644 index 0000000..d1565e8 --- /dev/null +++ b/arch/arm/mach-versatile/pci.c @@ -0,0 +1,360 @@ +/* + * linux/arch/arm/mach-versatile/pci.c + * + * (C) Copyright Koninklijke Philips Electronics NV 2004. All rights reserved. + * You can redistribute and/or modify this software under the terms of version 2 + * of the GNU General Public License as published by the Free Software Foundation. + * THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY WARRANTY; WITHOUT EVEN THE IMPLIED + * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * Koninklijke Philips Electronics nor its subsidiaries is obligated to provide any support for this software. + * + * ARM Versatile PCI driver. + * + * 14/04/2005 Initial version, colin.king@philips.com + * + */ +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/init.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/mach/pci.h> +#include <asm/mach-types.h> + +/* + * these spaces are mapped using the following base registers: + * + * Usage Local Bus Memory Base/Map registers used + * + * Mem 50000000 - 5FFFFFFF LB_BASE0/LB_MAP0, non prefetch + * Mem 60000000 - 6FFFFFFF LB_BASE1/LB_MAP1, prefetch + * IO 44000000 - 4FFFFFFF LB_BASE2/LB_MAP2, IO + * Cfg 42000000 - 42FFFFFF PCI config + * + */ +#define SYS_PCICTL IO_ADDRESS(VERSATILE_SYS_PCICTL) +#define PCI_IMAP0 IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x0) +#define PCI_IMAP1 IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x4) +#define PCI_IMAP2 IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x8) +#define PCI_SMAP0 IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x10) +#define PCI_SMAP1 IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x14) +#define PCI_SMAP2 IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x18) +#define PCI_SELFID IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0xc) + +#define DEVICE_ID_OFFSET 0x00 +#define CSR_OFFSET 0x04 +#define CLASS_ID_OFFSET 0x08 + +#define VP_PCI_DEVICE_ID 0x030010ee +#define VP_PCI_CLASS_ID 0x0b400000 + +static unsigned long pci_slot_ignore = 0; + +static int __init versatile_pci_slot_ignore(char *str) +{ + int retval; + int slot; + + while ((retval = get_option(&str,&slot))) { + if ((slot < 0) || (slot > 31)) { + printk("Illegal slot value: %d\n",slot); + } else { + pci_slot_ignore |= (1 << slot); + } + } + return 1; +} + +__setup("pci_slot_ignore=", versatile_pci_slot_ignore); + + +static unsigned long __pci_addr(struct pci_bus *bus, + unsigned int devfn, int offset) +{ + unsigned int busnr = bus->number; + + /* + * Trap out illegal values + */ + if (offset > 255) + BUG(); + if (busnr > 255) + BUG(); + if (devfn > 255) + BUG(); + + return (VERSATILE_PCI_CFG_VIRT_BASE | (busnr << 16) | + (PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | offset); +} + +static int versatile_read_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *val) +{ + unsigned long addr = __pci_addr(bus, devfn, where); + u32 v; + int slot = PCI_SLOT(devfn); + + if (pci_slot_ignore & (1 << slot)) { + /* Ignore this slot */ + switch (size) { + case 1: + v = 0xff; + break; + case 2: + v = 0xffff; + break; + default: + v = 0xffffffff; + } + } else { + switch (size) { + case 1: + addr &= ~3; + v = __raw_readb(addr); + break; + + case 2: + v = __raw_readl(addr & ~3); + if (addr & 2) v >>= 16; + v &= 0xffff; + break; + + default: + addr &= ~3; + v = __raw_readl(addr); + break; + } + } + + *val = v; + return PCIBIOS_SUCCESSFUL; +} + +static int versatile_write_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 val) +{ + unsigned long addr = __pci_addr(bus, devfn, where); + int slot = PCI_SLOT(devfn); + + if (pci_slot_ignore & (1 << slot)) { + return PCIBIOS_SUCCESSFUL; + } + + switch (size) { + case 1: + __raw_writeb((u8)val, addr); + break; + + case 2: + __raw_writew((u16)val, addr); + break; + + case 4: + __raw_writel(val, addr); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops pci_versatile_ops = { + .read = versatile_read_config, + .write = versatile_write_config, +}; + +static struct resource io_mem = { + .name = "PCI I/O space", + .start = VERSATILE_PCI_MEM_BASE0, + .end = VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1, + .flags = IORESOURCE_IO, +}; + +static struct resource non_mem = { + .name = "PCI non-prefetchable", + .start = VERSATILE_PCI_MEM_BASE1, + .end = VERSATILE_PCI_MEM_BASE1+VERSATILE_PCI_MEM_BASE1_SIZE-1, + .flags = IORESOURCE_MEM, +}; + +static struct resource pre_mem = { + .name = "PCI prefetchable", + .start = VERSATILE_PCI_MEM_BASE2, + .end = VERSATILE_PCI_MEM_BASE2+VERSATILE_PCI_MEM_BASE2_SIZE-1, + .flags = IORESOURCE_MEM | IORESOURCE_PREFETCH, +}; + +static int __init pci_versatile_setup_resources(struct resource **resource) +{ + int ret = 0; + + ret = request_resource(&iomem_resource, &io_mem); + if (ret) { + printk(KERN_ERR "PCI: unable to allocate I/O " + "memory region (%d)\n", ret); + goto out; + } + ret = request_resource(&iomem_resource, &non_mem); + if (ret) { + printk(KERN_ERR "PCI: unable to allocate non-prefetchable " + "memory region (%d)\n", ret); + goto release_io_mem; + } + ret = request_resource(&iomem_resource, &pre_mem); + if (ret) { + printk(KERN_ERR "PCI: unable to allocate prefetchable " + "memory region (%d)\n", ret); + goto release_non_mem; + } + + /* + * bus->resource[0] is the IO resource for this bus + * bus->resource[1] is the mem resource for this bus + * bus->resource[2] is the prefetch mem resource for this bus + */ + resource[0] = &io_mem; + resource[1] = &non_mem; + resource[2] = &pre_mem; + + goto out; + + release_non_mem: + release_resource(&non_mem); + release_io_mem: + release_resource(&io_mem); + out: + return ret; +} + +int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) +{ + int ret = 0; + int i; + int myslot = -1; + unsigned long val; + + if (nr == 0) { + sys->mem_offset = 0; + ret = pci_versatile_setup_resources(sys->resource); + if (ret < 0) { + printk("pci_versatile_setup: resources... oops?\n"); + goto out; + } + } else { + printk("pci_versatile_setup: resources... nr == 0??\n"); + goto out; + } + + __raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28,PCI_IMAP0); + __raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28,PCI_IMAP1); + __raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28,PCI_IMAP2); + + __raw_writel(1, SYS_PCICTL); + + val = __raw_readl(SYS_PCICTL); + if (!(val & 1)) { + printk("Not plugged into PCI backplane!\n"); + ret = -EIO; + goto out; + } + + /* + * We need to discover the PCI core first to configure itself + * before the main PCI probing is performed + */ + for (i=0; i<32; i++) { + if ((__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+DEVICE_ID_OFFSET) == VP_PCI_DEVICE_ID) && + (__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+CLASS_ID_OFFSET) == VP_PCI_CLASS_ID)) { + myslot = i; + + __raw_writel(myslot, PCI_SELFID); + val = __raw_readl(VERSATILE_PCI_CFG_VIRT_BASE+(myslot<<11)+CSR_OFFSET); + val |= (1<<2); + __raw_writel(val, VERSATILE_PCI_CFG_VIRT_BASE+(myslot<<11)+CSR_OFFSET); + break; + } + } + + if (myslot == -1) { + printk("Cannot find PCI core!\n"); + ret = -EIO; + } else { + printk("PCI core found (slot %d)\n",myslot); + /* Do not to map Versatile FPGA PCI device + into memory space as we are short of + mappable memory */ + pci_slot_ignore |= (1 << myslot); + ret = 1; + } + + out: + return ret; +} + + +struct pci_bus *pci_versatile_scan_bus(int nr, struct pci_sys_data *sys) +{ + return pci_scan_bus(sys->busnr, &pci_versatile_ops, sys); +} + +/* + * V3_LB_BASE? - local bus address + * V3_LB_MAP? - pci bus address + */ +void __init pci_versatile_preinit(void) +{ +} + +void __init pci_versatile_postinit(void) +{ +} + + +/* + * map the specified device/slot/pin to an IRQ. Different backplanes may need to modify this. + */ +static int __init versatile_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + int devslot = PCI_SLOT(dev->devfn); + + /* slot, pin, irq + 24 1 27 + 25 1 28 untested + 26 1 29 + 27 1 30 untested + */ + + irq = 27 + ((slot + pin + 2) % 3); /* Fudged */ + + printk("map irq: slot %d, pin %d, devslot %d, irq: %d\n",slot,pin,devslot,irq); + + return irq; +} + +static struct hw_pci versatile_pci __initdata = { + .swizzle = NULL, + .map_irq = versatile_map_irq, + .nr_controllers = 1, + .setup = pci_versatile_setup, + .scan = pci_versatile_scan_bus, + .preinit = pci_versatile_preinit, + .postinit = pci_versatile_postinit, +}; + +static int __init versatile_pci_init(void) +{ + pci_common_init(&versatile_pci); + return 0; +} + +subsys_initcall(versatile_pci_init); diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 3fefb43..95606b4 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -62,7 +62,7 @@ config CPU_ARM720T # ARM920T config CPU_ARM920T bool "Support ARM920T processor" if !ARCH_S3C2410 - depends on ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX + depends on ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX || ARCH_AAEC2000 default y if ARCH_S3C2410 select CPU_32v4 select CPU_ABRT_EV4T diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index a8c0023..27d0415 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -30,8 +30,6 @@ static DEFINE_SPINLOCK(v6_lock); -#define DCACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT) - /* * Copy the user page. No aliasing to deal with so we can just * attack the kernel's existing mapping of these pages. @@ -55,7 +53,7 @@ void v6_clear_user_page_nonaliasing(void *kaddr, unsigned long vaddr) */ void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vaddr) { - unsigned int offset = DCACHE_COLOUR(vaddr); + unsigned int offset = CACHE_COLOUR(vaddr); unsigned long from, to; /* @@ -95,7 +93,7 @@ void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vadd */ void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr) { - unsigned int offset = DCACHE_COLOUR(vaddr); + unsigned int offset = CACHE_COLOUR(vaddr); unsigned long to = to_address + (offset << PAGE_SHIFT); /* diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index 01967dd..be4ab3d 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -77,9 +77,8 @@ no_pmd: } static void -make_coherent(struct vm_area_struct *vma, unsigned long addr, struct page *page, int dirty) +make_coherent(struct address_space *mapping, struct vm_area_struct *vma, unsigned long addr, unsigned long pfn) { - struct address_space *mapping = page_mapping(page); struct mm_struct *mm = vma->vm_mm; struct vm_area_struct *mpnt; struct prio_tree_iter iter; @@ -87,9 +86,6 @@ make_coherent(struct vm_area_struct *vma, unsigned long addr, struct page *page, pgoff_t pgoff; int aliases = 0; - if (!mapping) - return; - pgoff = vma->vm_pgoff + ((addr - vma->vm_start) >> PAGE_SHIFT); /* @@ -115,9 +111,11 @@ make_coherent(struct vm_area_struct *vma, unsigned long addr, struct page *page, if (aliases) adjust_pte(vma, addr); else - flush_cache_page(vma, addr, page_to_pfn(page)); + flush_cache_page(vma, addr, pfn); } +void __flush_dcache_page(struct address_space *mapping, struct page *page); + /* * Take care of architecture specific things when placing a new PTE into * a page table, or changing an existing PTE. Basically, there are two @@ -134,29 +132,22 @@ make_coherent(struct vm_area_struct *vma, unsigned long addr, struct page *page, void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte) { unsigned long pfn = pte_pfn(pte); + struct address_space *mapping; struct page *page; if (!pfn_valid(pfn)) return; + page = pfn_to_page(pfn); - if (page_mapping(page)) { + mapping = page_mapping(page); + if (mapping) { int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags); - if (dirty) { - /* - * This is our first userspace mapping of this page. - * Ensure that the physical page is coherent with - * the kernel mapping. - * - * FIXME: only need to do this on VIVT and aliasing - * VIPT cache architectures. We can do that - * by choosing whether to set this bit... - */ - __cpuc_flush_dcache_page(page_address(page)); - } + if (dirty) + __flush_dcache_page(mapping, page); if (cache_is_vivt()) - make_coherent(vma, addr, page, dirty); + make_coherent(mapping, vma, addr, pfn); } } diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index e25b4fd..65bfe84 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -372,49 +372,50 @@ do_bad(unsigned long addr, unsigned int fsr, struct pt_regs *regs) static struct fsr_info { int (*fn)(unsigned long addr, unsigned int fsr, struct pt_regs *regs); int sig; + int code; const char *name; } fsr_info[] = { /* * The following are the standard ARMv3 and ARMv4 aborts. ARMv5 * defines these to be "precise" aborts. */ - { do_bad, SIGSEGV, "vector exception" }, - { do_bad, SIGILL, "alignment exception" }, - { do_bad, SIGKILL, "terminal exception" }, - { do_bad, SIGILL, "alignment exception" }, - { do_bad, SIGBUS, "external abort on linefetch" }, - { do_translation_fault, SIGSEGV, "section translation fault" }, - { do_bad, SIGBUS, "external abort on linefetch" }, - { do_page_fault, SIGSEGV, "page translation fault" }, - { do_bad, SIGBUS, "external abort on non-linefetch" }, - { do_bad, SIGSEGV, "section domain fault" }, - { do_bad, SIGBUS, "external abort on non-linefetch" }, - { do_bad, SIGSEGV, "page domain fault" }, - { do_bad, SIGBUS, "external abort on translation" }, - { do_sect_fault, SIGSEGV, "section permission fault" }, - { do_bad, SIGBUS, "external abort on translation" }, - { do_page_fault, SIGSEGV, "page permission fault" }, + { do_bad, SIGSEGV, 0, "vector exception" }, + { do_bad, SIGILL, BUS_ADRALN, "alignment exception" }, + { do_bad, SIGKILL, 0, "terminal exception" }, + { do_bad, SIGILL, BUS_ADRALN, "alignment exception" }, + { do_bad, SIGBUS, 0, "external abort on linefetch" }, + { do_translation_fault, SIGSEGV, SEGV_MAPERR, "section translation fault" }, + { do_bad, SIGBUS, 0, "external abort on linefetch" }, + { do_page_fault, SIGSEGV, SEGV_MAPERR, "page translation fault" }, + { do_bad, SIGBUS, 0, "external abort on non-linefetch" }, + { do_bad, SIGSEGV, SEGV_ACCERR, "section domain fault" }, + { do_bad, SIGBUS, 0, "external abort on non-linefetch" }, + { do_bad, SIGSEGV, SEGV_ACCERR, "page domain fault" }, + { do_bad, SIGBUS, 0, "external abort on translation" }, + { do_sect_fault, SIGSEGV, SEGV_ACCERR, "section permission fault" }, + { do_bad, SIGBUS, 0, "external abort on translation" }, + { do_page_fault, SIGSEGV, SEGV_ACCERR, "page permission fault" }, /* * The following are "imprecise" aborts, which are signalled by bit * 10 of the FSR, and may not be recoverable. These are only * supported if the CPU abort handler supports bit 10. */ - { do_bad, SIGBUS, "unknown 16" }, - { do_bad, SIGBUS, "unknown 17" }, - { do_bad, SIGBUS, "unknown 18" }, - { do_bad, SIGBUS, "unknown 19" }, - { do_bad, SIGBUS, "lock abort" }, /* xscale */ - { do_bad, SIGBUS, "unknown 21" }, - { do_bad, SIGBUS, "imprecise external abort" }, /* xscale */ - { do_bad, SIGBUS, "unknown 23" }, - { do_bad, SIGBUS, "dcache parity error" }, /* xscale */ - { do_bad, SIGBUS, "unknown 25" }, - { do_bad, SIGBUS, "unknown 26" }, - { do_bad, SIGBUS, "unknown 27" }, - { do_bad, SIGBUS, "unknown 28" }, - { do_bad, SIGBUS, "unknown 29" }, - { do_bad, SIGBUS, "unknown 30" }, - { do_bad, SIGBUS, "unknown 31" } + { do_bad, SIGBUS, 0, "unknown 16" }, + { do_bad, SIGBUS, 0, "unknown 17" }, + { do_bad, SIGBUS, 0, "unknown 18" }, + { do_bad, SIGBUS, 0, "unknown 19" }, + { do_bad, SIGBUS, 0, "lock abort" }, /* xscale */ + { do_bad, SIGBUS, 0, "unknown 21" }, + { do_bad, SIGBUS, BUS_OBJERR, "imprecise external abort" }, /* xscale */ + { do_bad, SIGBUS, 0, "unknown 23" }, + { do_bad, SIGBUS, 0, "dcache parity error" }, /* xscale */ + { do_bad, SIGBUS, 0, "unknown 25" }, + { do_bad, SIGBUS, 0, "unknown 26" }, + { do_bad, SIGBUS, 0, "unknown 27" }, + { do_bad, SIGBUS, 0, "unknown 28" }, + { do_bad, SIGBUS, 0, "unknown 29" }, + { do_bad, SIGBUS, 0, "unknown 30" }, + { do_bad, SIGBUS, 0, "unknown 31" } }; void __init @@ -435,15 +436,19 @@ asmlinkage void do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { const struct fsr_info *inf = fsr_info + (fsr & 15) + ((fsr & (1 << 10)) >> 6); + struct siginfo info; if (!inf->fn(addr, fsr, regs)) return; printk(KERN_ALERT "Unhandled fault: %s (0x%03x) at 0x%08lx\n", inf->name, fsr, addr); - force_sig(inf->sig, current); - show_pte(current->mm, addr); - die_if_kernel("Oops", regs, 0); + + info.si_signo = inf->sig; + info.si_errno = 0; + info.si_code = inf->code; + info.si_addr = (void __user *)addr; + notify_die("", regs, &info, fsr, 0); } asmlinkage void diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index 4085ed9..191788f 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -37,13 +37,8 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) #define flush_pfn_alias(pfn,vaddr) do { } while (0) #endif -static void __flush_dcache_page(struct address_space *mapping, struct page *page) +void __flush_dcache_page(struct address_space *mapping, struct page *page) { - struct mm_struct *mm = current->active_mm; - struct vm_area_struct *mpnt; - struct prio_tree_iter iter; - pgoff_t pgoff; - /* * Writeback any data associated with the kernel mapping of this * page. This ensures that data in the physical page is mutually @@ -52,24 +47,21 @@ static void __flush_dcache_page(struct address_space *mapping, struct page *page __cpuc_flush_dcache_page(page_address(page)); /* - * If there's no mapping pointer here, then this page isn't - * visible to userspace yet, so there are no cache lines - * associated with any other aliases. - */ - if (!mapping) - return; - - /* - * This is a page cache page. If we have a VIPT cache, we - * only need to do one flush - which would be at the relevant + * If this is a page cache page, and we have an aliasing VIPT cache, + * we only need to do one flush - which would be at the relevant * userspace colour, which is congruent with page->index. */ - if (cache_is_vipt()) { - if (cache_is_vipt_aliasing()) - flush_pfn_alias(page_to_pfn(page), - page->index << PAGE_CACHE_SHIFT); - return; - } + if (mapping && cache_is_vipt_aliasing()) + flush_pfn_alias(page_to_pfn(page), + page->index << PAGE_CACHE_SHIFT); +} + +static void __flush_dcache_aliases(struct address_space *mapping, struct page *page) +{ + struct mm_struct *mm = current->active_mm; + struct vm_area_struct *mpnt; + struct prio_tree_iter iter; + pgoff_t pgoff; /* * There are possible user space mappings of this page: @@ -116,12 +108,12 @@ void flush_dcache_page(struct page *page) { struct address_space *mapping = page_mapping(page); - if (cache_is_vipt_nonaliasing()) - return; - if (mapping && !mapping_mapped(mapping)) set_bit(PG_dcache_dirty, &page->flags); - else + else { __flush_dcache_page(mapping, page); + if (mapping && cache_is_vivt()) + __flush_dcache_aliases(mapping, page); + } } EXPORT_SYMBOL(flush_dcache_page); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 72a2b8c..edffa47 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -93,14 +93,7 @@ struct node_info { }; #define O_PFN_DOWN(x) ((x) >> PAGE_SHIFT) -#define V_PFN_DOWN(x) O_PFN_DOWN(__pa(x)) - #define O_PFN_UP(x) (PAGE_ALIGN(x) >> PAGE_SHIFT) -#define V_PFN_UP(x) O_PFN_UP(__pa(x)) - -#define PFN_SIZE(x) ((x) >> PAGE_SHIFT) -#define PFN_RANGE(s,e) PFN_SIZE(PAGE_ALIGN((unsigned long)(e)) - \ - (((unsigned long)(s)) & PAGE_MASK)) /* * FIXME: We really want to avoid allocating the bootmap bitmap @@ -113,7 +106,7 @@ find_bootmap_pfn(int node, struct meminfo *mi, unsigned int bootmap_pages) { unsigned int start_pfn, bank, bootmap_pfn; - start_pfn = V_PFN_UP(&_end); + start_pfn = O_PFN_UP(__pa(&_end)); bootmap_pfn = 0; for (bank = 0; bank < mi->nr_banks; bank ++) { @@ -122,9 +115,9 @@ find_bootmap_pfn(int node, struct meminfo *mi, unsigned int bootmap_pages) if (mi->bank[bank].node != node) continue; - start = O_PFN_UP(mi->bank[bank].start); - end = O_PFN_DOWN(mi->bank[bank].size + - mi->bank[bank].start); + start = mi->bank[bank].start >> PAGE_SHIFT; + end = (mi->bank[bank].size + + mi->bank[bank].start) >> PAGE_SHIFT; if (end < start_pfn) continue; @@ -191,8 +184,8 @@ find_memend_and_nodes(struct meminfo *mi, struct node_info *np) /* * Get the start and end pfns for this bank */ - start = O_PFN_UP(mi->bank[i].start); - end = O_PFN_DOWN(mi->bank[i].start + mi->bank[i].size); + start = mi->bank[i].start >> PAGE_SHIFT; + end = (mi->bank[i].start + mi->bank[i].size) >> PAGE_SHIFT; if (np[node].start > start) np[node].start = start; @@ -444,7 +437,7 @@ void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc) memtable_init(mi); if (mdesc->map_io) mdesc->map_io(); - flush_tlb_all(); + local_flush_tlb_all(); /* * initialise the zones within each node @@ -529,6 +522,69 @@ static inline void free_area(unsigned long addr, unsigned long end, char *s) printk(KERN_INFO "Freeing %s memory: %dK\n", s, size); } +static inline void +free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn) +{ + struct page *start_pg, *end_pg; + unsigned long pg, pgend; + + /* + * Convert start_pfn/end_pfn to a struct page pointer. + */ + start_pg = pfn_to_page(start_pfn); + end_pg = pfn_to_page(end_pfn); + + /* + * Convert to physical addresses, and + * round start upwards and end downwards. + */ + pg = PAGE_ALIGN(__pa(start_pg)); + pgend = __pa(end_pg) & PAGE_MASK; + + /* + * If there are free pages between these, + * free the section of the memmap array. + */ + if (pg < pgend) + free_bootmem_node(NODE_DATA(node), pg, pgend - pg); +} + +/* + * The mem_map array can get very big. Free the unused area of the memory map. + */ +static void __init free_unused_memmap_node(int node, struct meminfo *mi) +{ + unsigned long bank_start, prev_bank_end = 0; + unsigned int i; + + /* + * [FIXME] This relies on each bank being in address order. This + * may not be the case, especially if the user has provided the + * information on the command line. + */ + for (i = 0; i < mi->nr_banks; i++) { + if (mi->bank[i].size == 0 || mi->bank[i].node != node) + continue; + + bank_start = mi->bank[i].start >> PAGE_SHIFT; + if (bank_start < prev_bank_end) { + printk(KERN_ERR "MEM: unordered memory banks. " + "Not freeing memmap.\n"); + break; + } + + /* + * If we had a previous bank, and there is a space + * between the current bank and the previous, free it. + */ + if (prev_bank_end && prev_bank_end != bank_start) + free_memmap(node, prev_bank_end, bank_start); + + prev_bank_end = (mi->bank[i].start + + mi->bank[i].size) >> PAGE_SHIFT; + } +} + /* * mem_init() marks the free areas in the mem_map and tells us how much * memory is free. This is done after various parts of the system have @@ -547,16 +603,12 @@ void __init mem_init(void) max_mapnr = virt_to_page(high_memory) - mem_map; #endif - /* - * We may have non-contiguous memory. - */ - if (meminfo.nr_banks != 1) - create_memmap_holes(&meminfo); - /* this will put all unused low memory onto the freelists */ for_each_online_node(node) { pg_data_t *pgdat = NODE_DATA(node); + free_unused_memmap_node(node, &meminfo); + if (pgdat->node_spanned_pages != 0) totalram_pages += free_all_bootmem_node(pgdat); } diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 00bb8fd..7110e54 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -170,3 +170,50 @@ void __iounmap(void __iomem *addr) vfree((void *) (PAGE_MASK & (unsigned long) addr)); } EXPORT_SYMBOL(__iounmap); + +#ifdef __io +void __iomem *ioport_map(unsigned long port, unsigned int nr) +{ + return __io(port); +} +EXPORT_SYMBOL(ioport_map); + +void ioport_unmap(void __iomem *addr) +{ +} +EXPORT_SYMBOL(ioport_unmap); +#endif + +#ifdef CONFIG_PCI +#include <linux/pci.h> +#include <linux/ioport.h> + +void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) +{ + unsigned long start = pci_resource_start(dev, bar); + unsigned long len = pci_resource_len(dev, bar); + unsigned long flags = pci_resource_flags(dev, bar); + + if (!len || !start) + return NULL; + if (maxlen && len > maxlen) + len = maxlen; + if (flags & IORESOURCE_IO) + return ioport_map(start, len); + if (flags & IORESOURCE_MEM) { + if (flags & IORESOURCE_CACHEABLE) + return ioremap(start, len); + return ioremap_nocache(start, len); + } + return NULL; +} +EXPORT_SYMBOL(pci_iomap); + +void pci_iounmap(struct pci_dev *dev, void __iomem *addr) +{ + if ((unsigned long)addr >= VMALLOC_START && + (unsigned long)addr < VMALLOC_END) + iounmap(addr); +} +EXPORT_SYMBOL(pci_iounmap); +#endif diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c index 2c2b93d..c3bd503 100644 --- a/arch/arm/mm/mm-armv.c +++ b/arch/arm/mm/mm-armv.c @@ -169,7 +169,14 @@ pgd_t *get_pgd_slow(struct mm_struct *mm) memzero(new_pgd, FIRST_KERNEL_PGD_NR * sizeof(pgd_t)); + /* + * Copy over the kernel and IO PGD entries + */ init_pgd = pgd_offset_k(0); + memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR, + (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t)); + + clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t)); if (!vectors_high()) { /* @@ -198,14 +205,6 @@ pgd_t *get_pgd_slow(struct mm_struct *mm) spin_unlock(&mm->page_table_lock); } - /* - * Copy over the kernel and IO PGD entries - */ - memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR, - (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t)); - - clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t)); - return new_pgd; no_pte: @@ -683,7 +682,7 @@ void __init memtable_init(struct meminfo *mi) } flush_cache_all(); - flush_tlb_all(); + local_flush_tlb_all(); top_pmd = pmd_off_k(0xffff0000); } @@ -698,75 +697,3 @@ void __init iotable_init(struct map_desc *io_desc, int nr) for (i = 0; i < nr; i++) create_mapping(io_desc + i); } - -static inline void -free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn) -{ - struct page *start_pg, *end_pg; - unsigned long pg, pgend; - - /* - * Convert start_pfn/end_pfn to a struct page pointer. - */ - start_pg = pfn_to_page(start_pfn); - end_pg = pfn_to_page(end_pfn); - - /* - * Convert to physical addresses, and - * round start upwards and end downwards. - */ - pg = PAGE_ALIGN(__pa(start_pg)); - pgend = __pa(end_pg) & PAGE_MASK; - - /* - * If there are free pages between these, - * free the section of the memmap array. - */ - if (pg < pgend) - free_bootmem_node(NODE_DATA(node), pg, pgend - pg); -} - -static inline void free_unused_memmap_node(int node, struct meminfo *mi) -{ - unsigned long bank_start, prev_bank_end = 0; - unsigned int i; - - /* - * [FIXME] This relies on each bank being in address order. This - * may not be the case, especially if the user has provided the - * information on the command line. - */ - for (i = 0; i < mi->nr_banks; i++) { - if (mi->bank[i].size == 0 || mi->bank[i].node != node) - continue; - - bank_start = mi->bank[i].start >> PAGE_SHIFT; - if (bank_start < prev_bank_end) { - printk(KERN_ERR "MEM: unordered memory banks. " - "Not freeing memmap.\n"); - break; - } - - /* - * If we had a previous bank, and there is a space - * between the current bank and the previous, free it. - */ - if (prev_bank_end && prev_bank_end != bank_start) - free_memmap(node, prev_bank_end, bank_start); - - prev_bank_end = PAGE_ALIGN(mi->bank[i].start + - mi->bank[i].size) >> PAGE_SHIFT; - } -} - -/* - * The mem_map array can get very big. Free - * the unused area of the memory map. - */ -void __init create_memmap_holes(struct meminfo *mi) -{ - int node; - - for_each_online_node(node) - free_unused_memmap_node(node, mi); -} diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 32c4b0e..3de7f84 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -73,7 +73,12 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, (!vma || addr + len <= vma->vm_start)) return addr; } - start_addr = addr = mm->free_area_cache; + if (len > mm->cached_hole_size) { + start_addr = addr = mm->free_area_cache; + } else { + start_addr = addr = TASK_UNMAPPED_BASE; + mm->cached_hole_size = 0; + } full_search: if (do_align) @@ -90,6 +95,7 @@ full_search: */ if (start_addr != TASK_UNMAPPED_BASE) { start_addr = addr = TASK_UNMAPPED_BASE; + mm->cached_hole_size = 0; goto full_search; } return -ENOMEM; @@ -101,6 +107,8 @@ full_search: mm->free_area_cache = addr + len; return addr; } + if (addr + mm->cached_hole_size < vma->vm_start) + mm->cached_hole_size = vma->vm_start - addr; addr = vma->vm_end; if (do_align) addr = COLOUR_ALIGN(addr, pgoff); diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 1f32523..5c0ae52 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -445,14 +445,14 @@ __arm1020_setup: /* * R * .RVI ZFRS BLDP WCAM - * .0.1 1001 ..11 0101 /* FIXME: why no V bit? */ + * .011 1001 ..11 0101 */ .type arm1020_cr1_clear, #object .type arm1020_cr1_set, #object arm1020_cr1_clear: .word 0x593f arm1020_cr1_set: - .word 0x1935 + .word 0x3935 __INITDATA diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 142a2c2..d69389c 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -427,14 +427,14 @@ __arm1020e_setup: /* * R * .RVI ZFRS BLDP WCAM - * .0.1 1001 ..11 0101 /* FIXME: why no V bit? */ + * .011 1001 ..11 0101 */ .type arm1020e_cr1_clear, #object .type arm1020e_cr1_set, #object arm1020e_cr1_clear: .word 0x5f3f arm1020e_cr1_set: - .word 0x1935 + .word 0x3935 __INITDATA diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 0aa73d4..e3d8510 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -132,8 +132,8 @@ ENTRY(cpu_v6_switch_mm) * 100x 1 0 1 r/o no acc * 10x0 1 0 1 r/o no acc * 1011 0 0 1 r/w no acc - * 110x 1 1 0 r/o r/o - * 11x0 1 1 0 r/o r/o + * 110x 0 1 0 r/w r/o + * 11x0 0 1 0 r/w r/o * 1111 0 1 1 r/w r/w */ ENTRY(cpu_v6_set_pte) @@ -150,7 +150,7 @@ ENTRY(cpu_v6_set_pte) tst r1, #L_PTE_USER orrne r2, r2, #AP1 | nG tstne r2, #APX - eorne r2, r2, #AP0 + bicne r2, r2, #APX | AP0 tst r1, #L_PTE_YOUNG biceq r2, r2, #APX | AP1 | AP0 diff --git a/arch/arm/nwfpe/softfloat-macros b/arch/arm/nwfpe/softfloat-macros index 5469989..5a060f9 100644 --- a/arch/arm/nwfpe/softfloat-macros +++ b/arch/arm/nwfpe/softfloat-macros @@ -563,8 +563,14 @@ static bits64 estimateDiv128To64( bits64 a0, bits64 a1, bits64 b ) bits64 rem0, rem1, term0, term1; bits64 z; if ( b <= a0 ) return LIT64( 0xFFFFFFFFFFFFFFFF ); - b0 = b>>32; - z = ( b0<<32 <= a0 ) ? LIT64( 0xFFFFFFFF00000000 ) : ( a0 / b0 )<<32; + b0 = b>>32; /* hence b0 is 32 bits wide now */ + if ( b0<<32 <= a0 ) { + z = LIT64( 0xFFFFFFFF00000000 ); + } else { + z = a0; + do_div( z, b0 ); + z <<= 32; + } mul64To128( b, z, &term0, &term1 ); sub128( a0, a1, term0, term1, &rem0, &rem1 ); while ( ( (sbits64) rem0 ) < 0 ) { @@ -573,7 +579,12 @@ static bits64 estimateDiv128To64( bits64 a0, bits64 a1, bits64 b ) add128( rem0, rem1, b0, b1, &rem0, &rem1 ); } rem0 = ( rem0<<32 ) | ( rem1>>32 ); - z |= ( b0<<32 <= rem0 ) ? 0xFFFFFFFF : rem0 / b0; + if ( b0<<32 <= rem0 ) { + z |= 0xFFFFFFFF; + } else { + do_div( rem0, b0 ); + z |= rem0; + } return z; } @@ -601,6 +612,7 @@ static bits32 estimateSqrt32( int16 aExp, bits32 a ) }; int8 index; bits32 z; + bits64 A; index = ( a>>27 ) & 15; if ( aExp & 1 ) { @@ -614,7 +626,9 @@ static bits32 estimateSqrt32( int16 aExp, bits32 a ) z = ( 0x20000 <= z ) ? 0xFFFF8000 : ( z<<15 ); if ( z <= a ) return (bits32) ( ( (sbits32) a )>>1 ); } - return ( (bits32) ( ( ( (bits64) a )<<31 ) / z ) ) + ( z>>1 ); + A = ( (bits64) a )<<31; + do_div( A, z ); + return ( (bits32) A ) + ( z>>1 ); } diff --git a/arch/arm/nwfpe/softfloat.c b/arch/arm/nwfpe/softfloat.c index 9d743ae..e038dd3 100644 --- a/arch/arm/nwfpe/softfloat.c +++ b/arch/arm/nwfpe/softfloat.c @@ -28,6 +28,8 @@ this code that are retained. =============================================================================== */ +#include <asm/div64.h> + #include "fpa11.h" //#include "milieu.h" //#include "softfloat.h" @@ -1331,7 +1333,11 @@ float32 float32_div( float32 a, float32 b ) aSig >>= 1; ++zExp; } - zSig = ( ( (bits64) aSig )<<32 ) / bSig; + { + bits64 tmp = ( (bits64) aSig )<<32; + do_div( tmp, bSig ); + zSig = tmp; + } if ( ( zSig & 0x3F ) == 0 ) { zSig |= ( ( (bits64) bSig ) * zSig != ( (bits64) aSig )<<32 ); } @@ -1397,7 +1403,9 @@ float32 float32_rem( float32 a, float32 b ) q = ( bSig <= aSig ); if ( q ) aSig -= bSig; if ( 0 < expDiff ) { - q = ( ( (bits64) aSig )<<32 ) / bSig; + bits64 tmp = ( (bits64) aSig )<<32; + do_div( tmp, bSig ); + q = tmp; q >>= 32 - expDiff; bSig >>= 2; aSig = ( ( aSig>>1 )<<( expDiff - 1 ) ) - bSig * q; diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile index ba1a6e9..8ffb523 100644 --- a/arch/arm/oprofile/Makefile +++ b/arch/arm/oprofile/Makefile @@ -6,6 +6,6 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \ oprofilefs.o oprofile_stats.o \ timer_int.o ) -oprofile-y := $(DRIVER_OBJS) init.o +oprofile-y := $(DRIVER_OBJS) init.o backtrace.o oprofile-$(CONFIG_CPU_XSCALE) += common.o op_model_xscale.o diff --git a/arch/arm/oprofile/backtrace.c b/arch/arm/oprofile/backtrace.c new file mode 100644 index 0000000..ec58d3e --- /dev/null +++ b/arch/arm/oprofile/backtrace.c @@ -0,0 +1,144 @@ +/* + * Arm specific backtracing code for oprofile + * + * Copyright 2005 Openedhand Ltd. + * + * Author: Richard Purdie <rpurdie@openedhand.com> + * + * Based on i386 oprofile backtrace code by John Levon, David Smith + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/oprofile.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <asm/ptrace.h> +#include <asm/uaccess.h> + + +/* + * The registers we're interested in are at the end of the variable + * length saved register structure. The fp points at the end of this + * structure so the address of this struct is: + * (struct frame_tail *)(xxx->fp)-1 + */ +struct frame_tail { + struct frame_tail *fp; + unsigned long sp; + unsigned long lr; +} __attribute__((packed)); + + +#ifdef CONFIG_FRAME_POINTER +static struct frame_tail* kernel_backtrace(struct frame_tail *tail) +{ + oprofile_add_trace(tail->lr); + + /* frame pointers should strictly progress back up the stack + * (towards higher addresses) */ + if (tail >= tail->fp) + return NULL; + + return tail->fp-1; +} +#endif + +static struct frame_tail* user_backtrace(struct frame_tail *tail) +{ + struct frame_tail buftail; + + /* hardware pte might not be valid due to dirty/accessed bit emulation + * so we use copy_from_user and benefit from exception fixups */ + if (copy_from_user(&buftail, tail, sizeof(struct frame_tail))) + return NULL; + + oprofile_add_trace(buftail.lr); + + /* frame pointers should strictly progress back up the stack + * (towards higher addresses) */ + if (tail >= buftail.fp) + return NULL; + + return buftail.fp-1; +} + +/* Compare two addresses and see if they're on the same page */ +#define CMP_ADDR_EQUAL(x,y,offset) ((((unsigned long) x) >> PAGE_SHIFT) \ + == ((((unsigned long) y) + offset) >> PAGE_SHIFT)) + +/* check that the page(s) containing the frame tail are present */ +static int pages_present(struct frame_tail *tail) +{ + struct mm_struct * mm = current->mm; + + if (!check_user_page_readable(mm, (unsigned long)tail)) + return 0; + + if (CMP_ADDR_EQUAL(tail, tail, 8)) + return 1; + + if (!check_user_page_readable(mm, ((unsigned long)tail) + 8)) + return 0; + + return 1; +} + +/* + * | | /\ Higher addresses + * | | + * --------------- stack base (address of current_thread_info) + * | thread info | + * . . + * | stack | + * --------------- saved regs->ARM_fp value if valid (frame_tail address) + * . . + * --------------- struct pt_regs stored on stack (struct pt_regs *) + * | | + * . . + * | | + * --------------- %esp + * | | + * | | \/ Lower addresses + * + * Thus, &pt_regs <-> stack base restricts the valid(ish) fp values + */ +static int valid_kernel_stack(struct frame_tail *tail, struct pt_regs *regs) +{ + unsigned long tailaddr = (unsigned long)tail; + unsigned long stack = (unsigned long)regs; + unsigned long stack_base = (stack & ~(THREAD_SIZE - 1)) + THREAD_SIZE; + + return (tailaddr > stack) && (tailaddr < stack_base); +} + +void arm_backtrace(struct pt_regs const *regs, unsigned int depth) +{ + struct frame_tail *tail; + unsigned long last_address = 0; + + tail = ((struct frame_tail *) regs->ARM_fp) - 1; + + if (!user_mode(regs)) { + +#ifdef CONFIG_FRAME_POINTER + while (depth-- && tail && valid_kernel_stack(tail, regs)) { + tail = kernel_backtrace(tail); + } +#endif + return; + } + + while (depth-- && tail && !((unsigned long) tail & 3)) { + if ((!CMP_ADDR_EQUAL(last_address, tail, 0) + || !CMP_ADDR_EQUAL(last_address, tail, 8)) + && !pages_present(tail)) + return; + last_address = (unsigned long) tail; + tail = user_backtrace(tail); + } +} + diff --git a/arch/arm/oprofile/init.c b/arch/arm/oprofile/init.c index cce3d30..d315a3a 100644 --- a/arch/arm/oprofile/init.c +++ b/arch/arm/oprofile/init.c @@ -20,6 +20,8 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) ret = pmu_init(ops, &op_xscale_spec); #endif + ops->backtrace = arm_backtrace; + return ret; } diff --git a/arch/arm/oprofile/op_arm_model.h b/arch/arm/oprofile/op_arm_model.h index 2d4caf4..2148d07 100644 --- a/arch/arm/oprofile/op_arm_model.h +++ b/arch/arm/oprofile/op_arm_model.h @@ -24,6 +24,8 @@ struct op_arm_model_spec { extern struct op_arm_model_spec op_xscale_spec; #endif +extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth); + extern int __init pmu_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec); extern void pmu_exit(void); #endif /* OP_ARM_MODEL_H */ diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 30c1dfb..6d3a79e 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -6,7 +6,7 @@ # To add an entry into this database, please see Documentation/arm/README, # or contact rmk@arm.linux.org.uk # -# Last update: Thu Mar 24 14:34:50 2005 +# Last update: Thu Jun 23 20:19:33 2005 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -243,7 +243,7 @@ yoho ARCH_YOHO YOHO 231 jasper ARCH_JASPER JASPER 232 dsc25 ARCH_DSC25 DSC25 233 omap_innovator MACH_OMAP_INNOVATOR OMAP_INNOVATOR 234 -ramses ARCH_RAMSES RAMSES 235 +mnci ARCH_RAMSES RAMSES 235 s28x ARCH_S28X S28X 236 mport3 ARCH_MPORT3 MPORT3 237 pxa_eagle250 ARCH_PXA_EAGLE250 PXA_EAGLE250 238 @@ -323,7 +323,7 @@ nimbra29x ARCH_NIMBRA29X NIMBRA29X 311 nimbra210 ARCH_NIMBRA210 NIMBRA210 312 hhp_d95xx ARCH_HHP_D95XX HHP_D95XX 313 labarm ARCH_LABARM LABARM 314 -m825xx ARCH_M825XX M825XX 315 +comcerto ARCH_M825XX M825XX 315 m7100 SA1100_M7100 M7100 316 nipc2 ARCH_NIPC2 NIPC2 317 fu7202 ARCH_FU7202 FU7202 318 @@ -724,3 +724,66 @@ lpc22xx MACH_LPC22XX LPC22XX 715 omap_comet3 MACH_COMET3 COMET3 716 omap_comet4 MACH_COMET4 COMET4 717 csb625 MACH_CSB625 CSB625 718 +fortunet2 MACH_FORTUNET2 FORTUNET2 719 +s5h2200 MACH_S5H2200 S5H2200 720 +optorm920 MACH_OPTORM920 OPTORM920 721 +adsbitsyxb MACH_ADSBITSYXB ADSBITSYXB 722 +adssphere MACH_ADSSPHERE ADSSPHERE 723 +adsportal MACH_ADSPORTAL ADSPORTAL 724 +ln2410sbc MACH_LN2410SBC LN2410SBC 725 +cb3rufc MACH_CB3RUFC CB3RUFC 726 +mp2usb MACH_MP2USB MP2USB 727 +ntnp425c MACH_NTNP425C NTNP425C 728 +colibri MACH_COLIBRI COLIBRI 729 +pcm7220 MACH_PCM7220 PCM7220 730 +gateway7001 MACH_GATEWAY7001 GATEWAY7001 731 +pcm027 MACH_PCM027 PCM027 732 +cmpxa MACH_CMPXA CMPXA 733 +anubis MACH_ANUBIS ANUBIS 734 +ite8152 MACH_ITE8152 ITE8152 735 +lpc3xxx MACH_LPC3XXX LPC3XXX 736 +puppeteer MACH_PUPPETEER PUPPETEER 737 +vt001 MACH_MACH_VADATECH MACH_VADATECH 738 +e570 MACH_E570 E570 739 +x50 MACH_X50 X50 740 +recon MACH_RECON RECON 741 +xboardgp8 MACH_XBOARDGP8 XBOARDGP8 742 +fpic2 MACH_FPIC2 FPIC2 743 +akita MACH_AKITA AKITA 744 +a81 MACH_A81 A81 745 +svm_sc25x MACH_SVM_SC25X SVM_SC25X 746 +vt020 MACH_VADATECH020 VADATECH020 747 +tli MACH_TLI TLI 748 +edb9315lc MACH_EDB9315LC EDB9315LC 749 +passec MACH_PASSEC PASSEC 750 +ds_tiger MACH_DS_TIGER DS_TIGER 751 +e310 MACH_E310 E310 752 +e330 MACH_E330 E330 753 +rt3000 MACH_RT3000 RT3000 754 +nokia770 MACH_NOKIA770 NOKIA770 755 +pnx0106 MACH_PNX0106 PNX0106 756 +hx21xx MACH_HX21XX HX21XX 757 +faraday MACH_FARADAY FARADAY 758 +sbc9312 MACH_SBC9312 SBC9312 759 +batman MACH_BATMAN BATMAN 760 +jpd201 MACH_JPD201 JPD201 761 +mipsa MACH_MIPSA MIPSA 762 +kacom MACH_KACOM KACOM 763 +swarcocpu MACH_SWARCOCPU SWARCOCPU 764 +swarcodsl MACH_SWARCODSL SWARCODSL 765 +blueangel MACH_BLUEANGEL BLUEANGEL 766 +hairygrama MACH_HAIRYGRAMA HAIRYGRAMA 767 +banff MACH_BANFF BANFF 768 +carmeva MACH_CARMEVA CARMEVA 769 +sam255 MACH_SAM255 SAM255 770 +ppm10 MACH_PPM10 PPM10 771 +edb9315a MACH_EDB9315A EDB9315A 772 +sunset MACH_SUNSET SUNSET 773 +stargate2 MACH_STARGATE2 STARGATE2 774 +intelmote2 MACH_INTELMOTE2 INTELMOTE2 775 +trizeps4 MACH_TRIZEPS4 TRIZEPS4 776 +mainstone2 MACH_MAINSTONE2 MAINSTONE2 777 +ez_ixp42x MACH_EZ_IXP42X EZ_IXP42X 778 +tapwave_zodiac MACH_TAPWAVE_ZODIAC TAPWAVE_ZODIAC 779 +universalmeter MACH_UNIVERSALMETER UNIVERSALMETER 780 +hicoarm9 MACH_HICOARM9 HICOARM9 781 diff --git a/arch/arm/vfp/vfp.h b/arch/arm/vfp/vfp.h index 55a02bc..4b97950 100644 --- a/arch/arm/vfp/vfp.h +++ b/arch/arm/vfp/vfp.h @@ -117,7 +117,13 @@ static inline u64 vfp_estimate_div128to64(u64 nh, u64 nl, u64 m) if (nh >= m) return ~0ULL; mh = m >> 32; - z = (mh << 32 <= nh) ? 0xffffffff00000000ULL : (nh / mh) << 32; + if (mh << 32 <= nh) { + z = 0xffffffff00000000ULL; + } else { + z = nh; + do_div(z, mh); + z <<= 32; + } mul64to128(&termh, &terml, m, z); sub128(&remh, &reml, nh, nl, termh, terml); ml = m << 32; @@ -126,7 +132,12 @@ static inline u64 vfp_estimate_div128to64(u64 nh, u64 nl, u64 m) add128(&remh, &reml, remh, reml, mh, ml); } remh = (remh << 32) | (reml >> 32); - z |= (mh << 32 <= remh) ? 0xffffffff : remh / mh; + if (mh << 32 <= remh) { + z |= 0xffffffff; + } else { + do_div(remh, mh); + z |= remh; + } return z; } diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c index fa3053e..b801cd6 100644 --- a/arch/arm/vfp/vfpdouble.c +++ b/arch/arm/vfp/vfpdouble.c @@ -32,6 +32,8 @@ */ #include <linux/kernel.h> #include <linux/bitops.h> + +#include <asm/div64.h> #include <asm/ptrace.h> #include <asm/vfp.h> diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 3aeedd2..22f3da4 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -89,7 +89,7 @@ void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs) current->thread.error_code = 0; current->thread.trap_no = 6; - force_sig_info(SIGFPE, &info, current); + send_sig_info(SIGFPE, &info, current); } static void vfp_panic(char *reason) diff --git a/arch/arm/vfp/vfpsingle.c b/arch/arm/vfp/vfpsingle.c index 6849fe3..14dd696 100644 --- a/arch/arm/vfp/vfpsingle.c +++ b/arch/arm/vfp/vfpsingle.c @@ -32,6 +32,8 @@ */ #include <linux/kernel.h> #include <linux/bitops.h> + +#include <asm/div64.h> #include <asm/ptrace.h> #include <asm/vfp.h> @@ -303,7 +305,11 @@ u32 vfp_estimate_sqrt_significand(u32 exponent, u32 significand) if (z <= a) return (s32)a >> 1; } - return (u32)(((u64)a << 31) / z) + (z >> 1); + { + u64 v = (u64)a << 31; + do_div(v, z); + return v + (z >> 1); + } } static u32 vfp_single_fsqrt(int sd, int unused, s32 m, u32 fpscr) @@ -1107,7 +1113,11 @@ static u32 vfp_single_fdiv(int sd, int sn, s32 m, u32 fpscr) vsn.significand >>= 1; vsd.exponent++; } - vsd.significand = ((u64)vsn.significand << 32) / vsm.significand; + { + u64 significand = (u64)vsn.significand << 32; + do_div(significand, vsm.significand); + vsd.significand = significand; + } if ((vsd.significand & 0x3f) == 0) vsd.significand |= ((u64)vsm.significand * vsd.significand != (u64)vsn.significand << 32); |
