diff options
Diffstat (limited to 'arch/arm')
212 files changed, 3020 insertions, 1639 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 73067ef..fce1683 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -924,6 +924,7 @@ config ARCH_DAVINCI select GENERIC_IRQ_CHIP select HAVE_IDE select NEED_MACH_GPIO_H + select USE_OF select ZONE_DMA help Support for TI's DaVinci platform. @@ -1603,8 +1604,8 @@ config NR_CPUS default "4" config HOTPLUG_CPU - bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" - depends on SMP && HOTPLUG && EXPERIMENTAL + bool "Support for hot-pluggable CPUs" + depends on SMP && HOTPLUG help Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. @@ -1645,8 +1646,8 @@ config HZ default 100 config THUMB2_KERNEL - bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)" - depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL + bool "Compile the kernel in Thumb-2 mode" + depends on CPU_V7 && !CPU_V6 && !CPU_V6K select AEABI select ARM_ASM_UNIFIED select ARM_UNWIND @@ -1850,6 +1851,7 @@ config XEN_DOM0 config XEN bool "Xen guest support on ARM (EXPERIMENTAL)" depends on EXPERIMENTAL && ARM && OF + depends on CPU_V7 && !CPU_V6 help Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. diff --git a/arch/arm/Makefile b/arch/arm/Makefile index f023e3a..5f914fc 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -21,8 +21,6 @@ endif OBJCOPYFLAGS :=-O binary -R .comment -S GZFLAGS :=-9 #KBUILD_CFLAGS +=-pipe -# Explicitly specifiy 32-bit ARM ISA since toolchain default can be -mthumb: -KBUILD_CFLAGS +=$(call cc-option,-marm,) # Never generate .eh_frame KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm) @@ -105,17 +103,20 @@ endif ifeq ($(CONFIG_THUMB2_KERNEL),y) AFLAGS_AUTOIT :=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it) AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W) -CFLAGS_THUMB2 :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN) -AFLAGS_THUMB2 :=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb +CFLAGS_ISA :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN) +AFLAGS_ISA :=$(CFLAGS_ISA) -Wa$(comma)-mthumb # Work around buggy relocation from gas if requested: ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y) CFLAGS_MODULE +=-fno-optimize-sibling-calls endif +else +CFLAGS_ISA :=$(call cc-option,-marm,) +AFLAGS_ISA :=$(CFLAGS_ISA) endif # Need -Uarm for gcc < 3.x -KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_THUMB2) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm -KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_THUMB2) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float +KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm +KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float CHECKFLAGS += -D__arm__ diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 3fdab01..9137df5 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -33,7 +33,7 @@ ifeq ($(CONFIG_XIP_KERNEL),y) $(obj)/xipImage: vmlinux FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' + @$(kecho) ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' $(obj)/Image $(obj)/zImage: FORCE @echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)' @@ -48,14 +48,14 @@ $(obj)/xipImage: FORCE $(obj)/Image: vmlinux FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' + @$(kecho) ' Kernel: $@ is ready' $(obj)/compressed/vmlinux: $(obj)/Image FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed $@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' + @$(kecho) ' Kernel: $@ is ready' endif @@ -90,7 +90,7 @@ fi $(obj)/uImage: $(obj)/zImage FORCE @$(check_for_multiple_loadaddr) $(call if_changed,uimage) - @echo ' Image $@ is ready' + @$(kecho) ' Image $@ is ready' $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(Q)$(MAKE) $(build)=$(obj)/bootp $@ @@ -98,7 +98,7 @@ $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(obj)/bootpImage: $(obj)/bootp/bootp FORCE $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' + @$(kecho) ' Kernel: $@ is ready' PHONY += initrd FORCE initrd: diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index c1ce813..84e554e5 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -25,6 +25,8 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-trats.dtb \ exynos5250-smdk5250.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb +dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ + integratorcp.dtb dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-dns325.dtb \ @@ -34,11 +36,20 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-ib62x0.dtb \ kirkwood-iconnect.dtb \ kirkwood-iomega_ix2_200.dtb \ + kirkwood-is2.dtb \ kirkwood-km_kirkwood.dtb \ kirkwood-lschlv2.dtb \ kirkwood-lsxhl.dtb \ + kirkwood-mplcec4.dtb \ + kirkwood-ns2.dtb \ + kirkwood-ns2lite.dtb \ + kirkwood-ns2max.dtb \ + kirkwood-ns2mini.dtb \ + kirkwood-nsa310.dtb \ + kirkwood-topkick.dtb \ kirkwood-ts219-6281.dtb \ - kirkwood-ts219-6282.dtb + kirkwood-ts219-6282.dtb \ + kirkwood-openblocks_a6.dtb dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ msm8960-cdp.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ @@ -71,11 +82,13 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap5-evm.dtb \ am335x-evm.dtb \ am335x-bone.dtb +dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_U8500) += snowball.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ r8a7740-armadillo800eva.dtb \ - sh73a0-kzm9g.dtb + sh73a0-kzm9g.dtb \ + sh7372-mackerel.dtb dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \ spear1340-evb.dtb dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index b06c0db..e6391a4 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -126,14 +126,14 @@ #size-cells = <0>; btn3 { - label = "Buttin 3"; + label = "Button 3"; gpios = <&pioA 30 1>; linux,code = <0x103>; gpio-key,wakeup; }; btn4 { - label = "Buttin 4"; + label = "Button 4"; gpios = <&pioA 31 1>; linux,code = <0x104>; gpio-key,wakeup; diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts new file mode 100644 index 0000000..422fdb3 --- /dev/null +++ b/arch/arm/boot/dts/da850-enbw-cmc.dts @@ -0,0 +1,30 @@ +/* + * Device Tree for AM1808 EnBW CMC board + * + * Copyright 2012 DENX Software Engineering GmbH + * Heiko Schocher <hs@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +/dts-v1/; +/include/ "da850.dtsi" + +/ { + compatible = "enbw,cmc", "ti,da850"; + model = "EnBW CMC"; + + soc { + serial0: serial@1c42000 { + status = "okay"; + }; + serial1: serial@1d0c000 { + status = "okay"; + }; + serial2: serial@1d0d000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts new file mode 100644 index 0000000..37dc5a3 --- /dev/null +++ b/arch/arm/boot/dts/da850-evm.dts @@ -0,0 +1,28 @@ +/* + * Device Tree for DA850 EVM board + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation, version 2. + */ +/dts-v1/; +/include/ "da850.dtsi" + +/ { + compatible = "ti,da850-evm", "ti,da850"; + model = "DA850/AM1808/OMAP-L138 EVM"; + + soc { + serial0: serial@1c42000 { + status = "okay"; + }; + serial1: serial@1d0c000 { + status = "okay"; + }; + serial2: serial@1d0d000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi new file mode 100644 index 0000000..640ab75 --- /dev/null +++ b/arch/arm/boot/dts/da850.dtsi @@ -0,0 +1,60 @@ +/* + * Copyright 2012 DENX Software Engineering GmbH + * Heiko Schocher <hs@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +/include/ "skeleton.dtsi" + +/ { + arm { + #address-cells = <1>; + #size-cells = <1>; + ranges; + intc: interrupt-controller { + compatible = "ti,cp-intc"; + interrupt-controller; + #interrupt-cells = <1>; + ti,intc-size = <100>; + reg = <0xfffee000 0x2000>; + }; + }; + soc { + compatible = "simple-bus"; + model = "da850"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x01c00000 0x400000>; + + serial0: serial@1c42000 { + compatible = "ns16550a"; + reg = <0x42000 0x100>; + clock-frequency = <150000000>; + reg-shift = <2>; + interrupts = <25>; + interrupt-parent = <&intc>; + status = "disabled"; + }; + serial1: serial@1d0c000 { + compatible = "ns16550a"; + reg = <0x10c000 0x100>; + clock-frequency = <150000000>; + reg-shift = <2>; + interrupts = <53>; + interrupt-parent = <&intc>; + status = "disabled"; + }; + serial2: serial@1d0d000 { + compatible = "ns16550a"; + reg = <0x10d000 0x100>; + clock-frequency = <150000000>; + reg-shift = <2>; + interrupts = <61>; + interrupt-parent = <&intc>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 748ba7a..4b0e0ca 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -483,6 +483,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80004000 0x1000>; interrupts = <0 21 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -494,6 +496,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80122000 0x1000>; interrupts = <0 22 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -505,6 +509,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80128000 0x1000>; interrupts = <0 55 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -516,6 +522,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80110000 0x1000>; interrupts = <0 12 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -527,6 +535,8 @@ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x8012a000 0x1000>; interrupts = <0 51 0x4>; + arm,primecell-periphid = <0x180024>; + #address-cells = <1>; #size-cells = <0>; v-i2c-supply = <&db8500_vape_reg>; @@ -573,33 +583,38 @@ interrupts = <0 60 0x4>; status = "disabled"; }; + sdi@80118000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80118000 0x1000>; interrupts = <0 50 0x4>; status = "disabled"; }; + sdi@80005000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80005000 0x1000>; interrupts = <0 41 0x4>; status = "disabled"; }; + sdi@80119000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80119000 0x1000>; interrupts = <0 59 0x4>; status = "disabled"; }; + sdi@80114000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80114000 0x1000>; interrupts = <0 99 0x4>; status = "disabled"; }; + sdi@80008000 { compatible = "arm,pl18x", "arm,primecell"; - reg = <0x80114000 0x1000>; + reg = <0x80008000 0x1000>; interrupts = <0 100 0x4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 96fb824..5a00022 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -4,21 +4,32 @@ compatible = "marvell,dove"; model = "Marvell Armada 88AP510 SoC"; - interrupt-parent = <&intc>; - - intc: interrupt-controller { - compatible = "marvell,orion-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xf1020204 0x04>, - <0xf1020214 0x04>; - }; - - mbus@f1000000 { + soc@f1000000 { compatible = "simple-bus"; - ranges = <0 0xf1000000 0x4000000>; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&intc>; + + ranges = <0xc8000000 0xc8000000 0x0100000 /* CESA SRAM 1M */ + 0xe0000000 0xe0000000 0x8000000 /* PCIe0 Mem 128M */ + 0xe8000000 0xe8000000 0x8000000 /* PCIe1 Mem 128M */ + 0xf0000000 0xf0000000 0x0100000 /* ScratchPad 1M */ + 0x00000000 0xf1000000 0x1000000 /* SB/NB regs 16M */ + 0xf2000000 0xf2000000 0x0100000 /* PCIe0 I/O 1M */ + 0xf2100000 0xf2100000 0x0100000 /* PCIe0 I/O 1M */ + 0xf8000000 0xf8000000 0x8000000>; /* BootROM 128M */ + + l2: l2-cache { + compatible = "marvell,tauros2-cache"; + marvell,tauros2-cache-features = <0>; + }; + + intc: interrupt-controller { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20204 0x04>, <0x20214 0x04>; + }; uart0: serial@12000 { compatible = "ns16550a"; @@ -56,11 +67,6 @@ status = "disabled"; }; - wdt: wdt@20300 { - compatible = "marvell,orion-wdt"; - reg = <0x20300 0x28>; - }; - gpio0: gpio@d0400 { compatible = "marvell,orion-gpio"; #gpio-cells = <2>; @@ -139,5 +145,14 @@ nr-ports = <1>; status = "disabled"; }; + + crypto: crypto@30000 { + compatible = "marvell,orion-crypto"; + reg = <0x30000 0x10000>, + <0xc8000000 0x800>; + reg-names = "regs", "sram"; + interrupts = <31>; + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 73567b8..a21511c 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -20,8 +20,10 @@ compatible = "samsung,trats", "samsung,exynos4210"; memory { - reg = <0x40000000 0x20000000 - 0x60000000 0x20000000>; + reg = <0x40000000 0x10000000 + 0x50000000 0x10000000 + 0x60000000 0x10000000 + 0x70000000 0x10000000>; }; chosen { diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 9ca4ca7..6d31aa3 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -69,6 +69,7 @@ interrupts = <13>, <56>; interrupt-names = "gpmi-dma", "bch"; clocks = <&clks 34>; + clock-names = "gpmi_io"; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index e16d631..55c57ea 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -85,6 +85,7 @@ interrupts = <88>, <41>; interrupt-names = "gpmi-dma", "bch"; clocks = <&clks 50>; + clock-names = "gpmi_io"; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index 15df4c1..5bfa02a 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -37,6 +37,13 @@ pinctrl_hog: hoggrp { fsl,pins = < 176 0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */ + >; + }; + }; + + arm2 { + pinctrl_usdhc3_arm2: usdhc3grp-arm2 { + fsl,pins = < 1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */ 1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */ >; @@ -58,7 +65,8 @@ wp-gpios = <&gpio6 14 0>; vmmc-supply = <®_3p3v>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_1>; + pinctrl-0 = <&pinctrl_usdhc3_1 + &pinctrl_usdhc3_arm2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts new file mode 100644 index 0000000..0bdce0a --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-is2.dts @@ -0,0 +1,30 @@ +/dts-v1/; + +/include/ "kirkwood-ns2-common.dtsi" + +/ { + model = "LaCie Internet Space v2"; + compatible = "lacie,inetspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "ns2:blue:sata"; + slow-gpio = <&gpio0 29 0>; + cmd-gpio = <&gpio0 30 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 8ac51c0..798e60e 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -48,17 +48,19 @@ #size-cells = <0>; button@1 { label = "Function Button"; - linux,code = <132>; + linux,code = <357>; gpios = <&gpio1 9 1>; }; button@2 { label = "Power-on Switch"; - linux,code = <116>; + linux,code = <0>; + linux,input-type = <5>; gpios = <&gpio1 10 1>; }; button@3 { label = "Power-auto Switch"; - linux,code = <142>; + linux,code = <1>; + linux,input-type = <5>; gpios = <&gpio1 11 1>; }; }; @@ -67,29 +69,40 @@ compatible = "gpio-leds"; led@1 { - label = "lschlv2:blue:func"; + label = "lsxl:blue:func"; gpios = <&gpio1 4 1>; }; led@2 { - label = "lschlv2:red:alarm"; + label = "lsxl:red:alarm"; gpios = <&gpio1 5 1>; }; led@3 { - label = "lschlv2:amber:info"; + label = "lsxl:amber:info"; gpios = <&gpio1 6 1>; }; led@4 { - label = "lschlv2:blue:power"; + label = "lsxl:blue:power"; gpios = <&gpio1 7 1>; linux,default-trigger = "default-on"; }; led@5 { - label = "lschlv2:red:func"; + label = "lsxl:red:func"; gpios = <&gpio1 16 1>; }; }; + + gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio0 19 1 + &gpio0 18 1>; + gpio-fan,speed-map = <0 3 + 1500 2 + 3250 1 + 5000 0>; + alarm-gpios = <&gpio1 8 0>; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts new file mode 100644 index 0000000..ac3c080 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -0,0 +1,119 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "MPL CEC4"; + compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + i2c@11000 { + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + }; + + }; + + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0x100000>; + }; + + partition@100000 { + label = "env"; + reg = <0x100000 0x80000>; + }; + + partition@180000 { + label = "fdt"; + reg = <0x180000 0x80000>; + }; + + partition@200000 { + label = "kernel"; + reg = <0x200000 0x400000>; + }; + + partition@600000 { + label = "rootfs"; + reg = <0x600000 0x1fa00000>; + }; + }; + + rtc@10300 { + status = "disabled"; + }; + + sata@80000 { + nr-ports = <2>; + status = "okay"; + + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + health { + label = "status:green:health"; + gpios = <&gpio0 7 1>; + }; + + user1o { + label = "user1:orange"; + gpios = <&gpio1 8 1>; + default-state = "on"; + }; + + user1g { + label = "user1:green"; + gpios = <&gpio1 9 1>; + default-state = "on"; + }; + + user0o { + label = "user0:orange"; + gpios = <&gpio1 12 1>; + default-state = "on"; + }; + + user0g { + label = "user0:green"; + gpios = <&gpio1 13 1>; + default-state = "on"; + }; + + misc { + label = "status:orange:misc"; + gpios = <&gpio1 14 1>; + default-state = "on"; + }; + + }; +}; + diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi new file mode 100644 index 0000000..9bc6785 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -0,0 +1,63 @@ +/include/ "kirkwood.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <166666667>; + status = "okay"; + }; + + spi@10600 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l4005a"; + reg = <0>; + spi-max-frequency = <20000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x80000>; + label = "u-boot"; + }; + }; + }; + + i2c@11000 { + status = "okay"; + + eeprom@50 { + compatible = "at,24c04"; + pagesize = <16>; + reg = <0x50>; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power push button"; + linux,code = <116>; + gpios = <&gpio1 0 0>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + red-fail { + label = "ns2:red:fail"; + gpios = <&gpio0 12 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts new file mode 100644 index 0000000..f2d36ecf --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ns2.dts @@ -0,0 +1,30 @@ +/dts-v1/; + +/include/ "kirkwood-ns2-common.dtsi" + +/ { + model = "LaCie Network Space v2"; + compatible = "lacie,netspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "ns2:blue:sata"; + slow-gpio = <&gpio0 29 0>; + cmd-gpio = <&gpio0 30 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts new file mode 100644 index 0000000..b02eb4e --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts @@ -0,0 +1,30 @@ +/dts-v1/; + +/include/ "kirkwood-ns2-common.dtsi" + +/ { + model = "LaCie Network Space Lite v2"; + compatible = "lacie,netspace_lite_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + blue-sata { + label = "ns2:blue:sata"; + gpios = <&gpio0 30 1>; + linux,default-trigger = "default-on"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts new file mode 100644 index 0000000..bcec4d6 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ns2max.dts @@ -0,0 +1,49 @@ +/dts-v1/; + +/include/ "kirkwood-ns2-common.dtsi" + +/ { + model = "LaCie Network Space Max v2"; + compatible = "lacie,netspace_max_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + }; + + gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio0 22 1 + &gpio0 7 1 + &gpio1 1 1 + &gpio0 23 1>; + gpio-fan,speed-map = + < 0 0 + 1500 15 + 1700 14 + 1800 13 + 2100 12 + 3100 11 + 3300 10 + 4300 9 + 5500 8>; + alarm-gpios = <&gpio0 25 1>; + }; + + ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "ns2:blue:sata"; + slow-gpio = <&gpio0 29 0>; + cmd-gpio = <&gpio0 30 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts new file mode 100644 index 0000000..b79f5eb --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts @@ -0,0 +1,49 @@ +/dts-v1/; + +/include/ "kirkwood-ns2-common.dtsi" + +/ { + model = "LaCie Network Space Mini v2"; + compatible = "lacie,netspace_mini_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio0 22 1 + &gpio0 7 1 + &gpio1 1 1 + &gpio0 23 1>; + gpio-fan,speed-map = + < 0 0 + 3000 15 + 3180 14 + 4140 13 + 4570 12 + 6760 11 + 7140 10 + 7980 9 + 9200 8>; + alarm-gpios = <&gpio0 25 1>; + }; + + ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "ns2:blue:sata"; + slow-gpio = <&gpio0 29 0>; + cmd-gpio = <&gpio0 30 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts new file mode 100644 index 0000000..5509f96 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -0,0 +1,144 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "ZyXEL NSA310"; + compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + ocp@f1000000 { + + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + i2c@11000 { + status = "okay"; + }; + + nand@3000000 { + status = "okay"; + chip-delay = <35>; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0x0100000>; + read-only; + }; + partition@100000 { + label = "uboot_env"; + reg = <0x0100000 0x0080000>; + }; + partition@180000 { + label = "key_store"; + reg = <0x0180000 0x0080000>; + }; + partition@200000 { + label = "info"; + reg = <0x0200000 0x0080000>; + }; + partition@280000 { + label = "etc"; + reg = <0x0280000 0x0a00000>; + }; + partition@c80000 { + label = "kernel_1"; + reg = <0x0c80000 0x0a00000>; + }; + partition@1680000 { + label = "rootfs1"; + reg = <0x1680000 0x2fc0000>; + }; + partition@4640000 { + label = "kernel_2"; + reg = <0x4640000 0x0a00000>; + }; + partition@5040000 { + label = "rootfs2"; + reg = <0x5040000 0x2fc0000>; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power Button"; + linux,code = <116>; + gpios = <&gpio1 14 0>; + }; + button@2 { + label = "Copy Button"; + linux,code = <133>; + gpios = <&gpio1 5 1>; + }; + button@3 { + label = "Reset Button"; + linux,code = <0x198>; + gpios = <&gpio1 4 1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + green-sys { + label = "nsa310:green:sys"; + gpios = <&gpio0 28 0>; + }; + red-sys { + label = "nsa310:red:sys"; + gpios = <&gpio0 29 0>; + }; + green-hdd { + label = "nsa310:green:hdd"; + gpios = <&gpio1 9 0>; + }; + red-hdd { + label = "nsa310:red:hdd"; + gpios = <&gpio1 10 0>; + }; + green-esata { + label = "nsa310:green:esata"; + gpios = <&gpio0 12 0>; + }; + red-esata { + label = "nsa310:red:esata"; + gpios = <&gpio0 13 0>; + }; + green-usb { + label = "nsa310:green:usb"; + gpios = <&gpio0 15 0>; + }; + red-usb { + label = "nsa310:red:usb"; + gpios = <&gpio0 16 0>; + }; + green-copy { + label = "nsa310:green:copy"; + gpios = <&gpio1 7 0>; + }; + red-copy { + label = "nsa310:red:copy"; + gpios = <&gpio1 8 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts new file mode 100644 index 0000000..9a2606c --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -0,0 +1,39 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Plat'Home OpenBlocksA6"; + compatible = "plathome,openblocks-a6", "marvell,kirkwood-88f6283", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + serial@12100 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + chip-delay = <25>; + status = "okay"; + }; + + sata@80000 { + nr-ports = <1>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts new file mode 100644 index 0000000..c0de5a7 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -0,0 +1,85 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Univeral Scientific Industrial Co. Topkick-1281P2"; + compatible = "usi,topkick-1281P2", "usi,topkick", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; + }; + + partition@180000 { + label = "u-boot env"; + reg = <0x0180000 0x20000>; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; + }; + + partition@800000 { + label = "uInitrd"; + reg = <0x0800000 0x1000000>; + }; + + partition@1800000 { + label = "rootfs"; + reg = <0x1800000 0xe800000>; + }; + }; + + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + disk { + label = "topkick:yellow:disk"; + gpios = <&gpio0 21 1>; + linux,default-trigger = "ide-disk"; + }; + system2 { + label = "topkick:red:system"; + gpios = <&gpio1 5 1>; + }; + system { + label = "topkick:blue:system"; + gpios = <&gpio1 6 1>; + default-state = "on"; + }; + wifi { + label = "topkick:green:wifi"; + gpios = <&gpio1 7 1>; + }; + wifi2 { + label = "topkick:yellow:wifi"; + gpios = <&gpio1 16 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index f38ea87..696e929 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -257,7 +257,7 @@ interrupt-names = "common", "tx", "rx", "sidetone"; interrupt-parent = <&intc>; ti,buffer-size = <1280>; - ti,hwmods = "mcbsp2"; + ti,hwmods = "mcbsp2", "mcbsp2_sidetone"; }; mcbsp3: mcbsp@49024000 { @@ -272,7 +272,7 @@ interrupt-names = "common", "tx", "rx", "sidetone"; interrupt-parent = <&intc>; ti,buffer-size = <128>; - ti,hwmods = "mcbsp3"; + ti,hwmods = "mcbsp3", "mcbsp3_sidetone"; }; mcbsp4: mcbsp@49026000 { diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts new file mode 100644 index 0000000..5a3a58b --- /dev/null +++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +/include/ "orion5x.dtsi" + +/ { + model = "LaCie Ethernet Disk mini V2"; + compatible = "lacie,ethernet-disk-mini-v2", "marvell-orion5x-88f5182", "marvell,orion5x"; + + memory { + reg = <0x00000000 0x4000000>; /* 64 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <166666667>; + status = "okay"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "Power-on Switch"; + linux,code = <116>; /* KEY_POWER */ + gpios = <&gpio0 18 0>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + + led@1 { + label = "power:blue"; + gpios = <&gpio0 16 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi new file mode 100644 index 0000000..8aad00f --- /dev/null +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -0,0 +1,98 @@ +/* + * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Marvell Orion5x SoC"; + compatible = "marvell,orion5x"; + interrupt-parent = <&intc>; + + intc: interrupt-controller { + compatible = "marvell,orion-intc", "marvell,intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xf1020204 0x04>; + }; + + ocp@f1000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0xf1000000 0x4000000 + 0xf2200000 0xf2200000 0x0000800>; + #address-cells = <1>; + #size-cells = <1>; + + gpio0: gpio@10100 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x10100 0x40>; + ngpio = <32>; + interrupts = <6>, <7>, <8>, <9>; + }; + + serial@12000 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <3>; + /* set clock-frequency in board dts */ + status = "disabled"; + }; + + serial@12100 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <4>; + /* set clock-frequency in board dts */ + status = "disabled"; + }; + + spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + reg = <0x10600 0x28>; + status = "disabled"; + }; + + wdt@20300 { + compatible = "marvell,orion-wdt"; + reg = <0x20300 0x28>; + status = "okay"; + }; + + sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <29>; + status = "disabled"; + }; + + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <5>; + clock-frequency = <100000>; + status = "disabled"; + }; + + crypto@90000 { + compatible = "marvell,orion-crypto"; + reg = <0x90000 0x10000>, + <0xf2200000 0x800>; + reg-names = "regs", "sram"; + interrupts = <22>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sh7372-mackerel.dts b/arch/arm/boot/dts/sh7372-mackerel.dts new file mode 100644 index 0000000..286f0ca --- /dev/null +++ b/arch/arm/boot/dts/sh7372-mackerel.dts @@ -0,0 +1,22 @@ +/* + * Device Tree Source for the mackerel board + * + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +/include/ "skeleton.dtsi" + +/ { + model = "Mackerel (AP4 EVM 2nd)"; + compatible = "renesas,mackerel"; + + memory { + device_type = "memory"; + reg = <0x40000000 0x10000000>; + }; +}; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index b1497c7..df7f227 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -73,8 +73,8 @@ pinmux: pinmux { compatible = "nvidia,tegra30-pinmux"; - reg = <0x70000868 0xd0 /* Pad control registers */ - 0x70003000 0x3e0>; /* Mux registers */ + reg = <0x70000868 0xd4 /* Pad control registers */ + 0x70003000 0x3e4>; /* Mux registers */ }; serial@70006000 { diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi index b459691..330f833 100644 --- a/arch/arm/boot/dts/wm8505.dtsi +++ b/arch/arm/boot/dts/wm8505.dtsi @@ -71,13 +71,13 @@ ehci@d8007100 { compatible = "via,vt8500-ehci"; reg = <0xd8007100 0x200>; - interrupts = <43>; + interrupts = <1>; }; uhci@d8007300 { compatible = "platform-uhci"; reg = <0xd8007300 0x200>; - interrupts = <43>; + interrupts = <0>; }; fb@d8050800 { diff --git a/arch/arm/configs/ap4evb_defconfig b/arch/arm/configs/ap4evb_defconfig index 2eef85e..66894f7 100644 --- a/arch/arm/configs/ap4evb_defconfig +++ b/arch/arm/configs/ap4evb_defconfig @@ -46,7 +46,6 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set CONFIG_TMPFS=y # CONFIG_MISC_FILESYSTEMS is not set CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig index f78d259..a18593d 100644 --- a/arch/arm/configs/armadillo800eva_defconfig +++ b/arch/arm/configs/armadillo800eva_defconfig @@ -20,7 +20,7 @@ CONFIG_MACH_ARMADILLO800EVA=y # CONFIG_SH_TIMER_TMU is not set CONFIG_ARM_THUMB=y CONFIG_CPU_BPREDICT_DISABLE=y -# CONFIG_CACHE_L2X0 is not set +CONFIG_CACHE_L2X0=y CONFIG_ARM_ERRATA_430973=y CONFIG_ARM_ERRATA_458693=y CONFIG_ARM_ERRATA_460075=y diff --git a/arch/arm/configs/da8xx_omapl_defconfig b/arch/arm/configs/da8xx_omapl_defconfig index 88ccde0..f292239 100644 --- a/arch/arm/configs/da8xx_omapl_defconfig +++ b/arch/arm/configs/da8xx_omapl_defconfig @@ -17,6 +17,7 @@ CONFIG_MODVERSIONS=y CONFIG_ARCH_DAVINCI=y CONFIG_ARCH_DAVINCI_DA830=y CONFIG_ARCH_DAVINCI_DA850=y +CONFIG_MACH_DA8XX_DT=y CONFIG_MACH_MITYOMAPL138=y CONFIG_MACH_OMAPL138_HAWKBOARD=y CONFIG_DAVINCI_RESET_CLOCKS=y @@ -26,6 +27,7 @@ CONFIG_PREEMPT=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set CONFIG_LEDS=y +CONFIG_USE_OF=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CPU_FREQ=y @@ -75,6 +77,7 @@ CONFIG_SERIO_LIBPS2=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=3 +CONFIG_SERIAL_OF_PLATFORM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_DAVINCI=y diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig index 40db34c..0b7ee92 100644 --- a/arch/arm/configs/dove_defconfig +++ b/arch/arm/configs/dove_defconfig @@ -8,11 +8,19 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_DOVE=y CONFIG_MACH_DOVE_DB=y +CONFIG_MACH_CM_A510=y +CONFIG_MACH_DOVE_DT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_HIGHMEM=y +CONFIG_USE_OF=y +CONFIG_ATAGS=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y CONFIG_VFP=y CONFIG_NET=y CONFIG_PACKET=y @@ -62,6 +70,9 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -74,6 +85,18 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_IO_ACCESSORS=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_DOVE=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_MV=y CONFIG_DMADEVICES=y @@ -122,6 +145,7 @@ CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_MV_CESA=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/g3evm_defconfig b/arch/arm/configs/g3evm_defconfig deleted file mode 100644 index 4a336ab..0000000 --- a/arch/arm/configs/g3evm_defconfig +++ /dev/null @@ -1,57 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE=y -CONFIG_ARCH_SH7367=y -CONFIG_MACH_G3EVM=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200" -CONFIG_KEXEC=y -CONFIG_PM=y -# CONFIG_SUSPEND is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FIRMWARE_IN_KERNEL is not set -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=8 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_FTRACE is not set -# CONFIG_CRC32 is not set diff --git a/arch/arm/configs/g4evm_defconfig b/arch/arm/configs/g4evm_defconfig deleted file mode 100644 index 21c6d03..0000000 --- a/arch/arm/configs/g4evm_defconfig +++ /dev/null @@ -1,57 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE=y -CONFIG_ARCH_SH7377=y -CONFIG_MACH_G4EVM=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttySC4,115200 earlyprintk=sh-sci.4,115200" -CONFIG_KEXEC=y -CONFIG_PM=y -# CONFIG_SUSPEND is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FIRMWARE_IN_KERNEL is not set -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=8 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set -CONFIG_TMPFS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_DETECT_SOFTLOCKUP is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_FTRACE is not set -# CONFIG_CRC32 is not set diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index 78ed575..d100401 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -121,6 +121,7 @@ CONFIG_REGULATOR_MC13892=y CONFIG_MEDIA_SUPPORT=y CONFIG_VIDEO_DEV=y CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_OV2640=y CONFIG_VIDEO_MX2=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 66aa7a6..508ac9d 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -139,22 +139,27 @@ CONFIG_I2C_IMX=y CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_MC9S08DZ60=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y +CONFIG_MFD_DA9052_I2C=y CONFIG_MFD_MC13XXX_SPI=y CONFIG_MFD_MC13XXX_I2C=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_DA9052=y CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=y CONFIG_MEDIA_SUPPORT=y CONFIG_VIDEO_DEV=y CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_OV2640=y CONFIG_VIDEO_MX3=y CONFIG_FB=y +CONFIG_LCD_PLATFORM=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_L4F00242T03=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 74eee0c..93f3794 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -27,6 +27,14 @@ CONFIG_MACH_GOFLEXNET_DT=y CONFIG_MACH_LSXL_DT=y CONFIG_MACH_IOMEGA_IX2_200_DT=y CONFIG_MACH_KM_KIRKWOOD_DT=y +CONFIG_MACH_INETSPACE_V2_DT=y +CONFIG_MACH_MPLCEC4_DT=y +CONFIG_MACH_NETSPACE_V2_DT=y +CONFIG_MACH_NETSPACE_MAX_V2_DT=y +CONFIG_MACH_NETSPACE_LITE_V2_DT=y +CONFIG_MACH_NETSPACE_MINI_V2_DT=y +CONFIG_MACH_OPENBLOCKS_A6_DT=y +CONFIG_MACH_TOPKICK_DT=y CONFIG_MACH_TS219=y CONFIG_MACH_TS41X=y CONFIG_MACH_DOCKSTAR=y @@ -40,6 +48,7 @@ CONFIG_MACH_D2NET_V2=y CONFIG_MACH_NET2BIG_V2=y CONFIG_MACH_NET5BIG_V2=y CONFIG_MACH_T5325=y +CONFIG_MACH_NSA310_DT=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_PREEMPT=y CONFIG_AEABI=y diff --git a/arch/arm/configs/kota2_defconfig b/arch/arm/configs/kota2_defconfig index b7735d6..fa83db1 100644 --- a/arch/arm/configs/kota2_defconfig +++ b/arch/arm/configs/kota2_defconfig @@ -112,7 +112,6 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_RENESAS_TPU=y CONFIG_LEDS_TRIGGERS=y # CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set CONFIG_TMPFS=y # CONFIG_MISC_FILESYSTEMS is not set CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig index c88b578..afbae28 100644 --- a/arch/arm/configs/kzm9g_defconfig +++ b/arch/arm/configs/kzm9g_defconfig @@ -74,6 +74,8 @@ CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ST1232=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_ADXL34X=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=9 @@ -119,8 +121,9 @@ CONFIG_DMADEVICES=y CONFIG_SH_DMAE=y CONFIG_ASYNC_TX_DMA=y CONFIG_STAGING=y +CONFIG_SENSORS_AK8975=y +CONFIG_IIO=y # CONFIG_DNOTIFY is not set -CONFIG_INOTIFY_USER=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y # CONFIG_MISC_FILESYSTEMS is not set diff --git a/arch/arm/configs/mackerel_defconfig b/arch/arm/configs/mackerel_defconfig index 306a2e2..2098ce1 100644 --- a/arch/arm/configs/mackerel_defconfig +++ b/arch/arm/configs/mackerel_defconfig @@ -70,17 +70,31 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=8 CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_SH_MOBILE=y # CONFIG_HWMON is not set # CONFIG_MFD_SUPPORT is not set CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_SH_MOBILE_LCDC=y +CONFIG_FB_SH_MOBILE_HDMI=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_CLUT224 is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_SOC_SH4_FSI=y +CONFIG_USB=y +CONFIG_USB_RENESAS_USBHS_HCD=y +CONFIG_USB_RENESAS_USBHS=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_RENESAS_USBHS_UDC=y +CONFIG_DMADEVICES=y +CONFIG_SH_DMAE=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -91,7 +105,6 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y # CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index 53382b6..5b8215f 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig @@ -69,6 +69,10 @@ CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=6 CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_RCAR=y +CONFIG_SPI=y +CONFIG_SPI_SH_HSPI=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set CONFIG_THERMAL=y diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig index 7bcf850..3458752 100644 --- a/arch/arm/configs/mvebu_defconfig +++ b/arch/arm/configs/mvebu_defconfig @@ -1,6 +1,6 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y +CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y @@ -9,10 +9,12 @@ CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_MVEBU=y -CONFIG_MACH_ARMADA_370_XP=y +CONFIG_MACH_ARMADA_370=y +CONFIG_MACH_ARMADA_XP=y +# CONFIG_CACHE_L2X0 is not set CONFIG_AEABI=y CONFIG_HIGHMEM=y -CONFIG_USE_OF=y +# CONFIG_COMPACTION is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y @@ -23,6 +25,8 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index cd5e6ba..952430d 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -1,7 +1,8 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_EXPERT=y # CONFIG_SLUB_DEBUG is not set CONFIG_PROFILING=y @@ -10,6 +11,8 @@ CONFIG_KPROBES=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_BSD_DISKLABEL=y CONFIG_ARCH_ORION5X=y CONFIG_MACH_DB88F5281=y CONFIG_MACH_RD88F5182=y @@ -24,7 +27,7 @@ CONFIG_MACH_TS409=y CONFIG_MACH_WRT350N_V2=y CONFIG_MACH_TS78XX=y CONFIG_MACH_MV2120=y -CONFIG_MACH_EDMINI_V2=y +CONFIG_MACH_EDMINI_V2_DT=y CONFIG_MACH_D2NET=y CONFIG_MACH_BIGDISK=y CONFIG_MACH_NET2BIG=y @@ -33,17 +36,13 @@ CONFIG_MACH_WNR854T=y CONFIG_MACH_RD88F5181L_GE=y CONFIG_MACH_RD88F5181L_FXO=y CONFIG_MACH_RD88F6183AP_GE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_AEABI=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y CONFIG_FPE_NWFPE=y CONFIG_VFP=y -# CONFIG_SUSPEND is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -54,13 +53,10 @@ CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_NET_DSA=y -CONFIG_NET_DSA_MV88E6131=y -CONFIG_NET_DSA_MV88E6123_61_65=y CONFIG_NET_PKTGEN=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -82,12 +78,11 @@ CONFIG_CHR_DEV_SG=m CONFIG_ATA=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y -CONFIG_MARVELL_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_NET_PCI=y +CONFIG_NET_DSA_MV88E6131=y +CONFIG_NET_DSA_MV88E6123_61_65=y CONFIG_MV643XX_ETH=y -# CONFIG_NETDEV_10000 is not set +CONFIG_MARVELL_PHY=y # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set @@ -95,11 +90,12 @@ CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set # CONFIG_VT is not set +CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_SERIAL_OF_PLATFORM=y CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set @@ -109,10 +105,8 @@ CONFIG_GPIO_SYSFS=y CONFIG_SENSORS_LM75=y # CONFIG_VGA_ARB is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_PRINTER=y CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DATAFAB=y @@ -140,7 +134,6 @@ CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_EXT4_FS=m -CONFIG_INOTIFY=y CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_UDF_FS=m @@ -150,25 +143,18 @@ CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_LATENCYTOP=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_ECB=m diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index cdd4d2b..2ba9e63 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig @@ -1,3 +1,4 @@ +CONFIG_ARCH_VERSATILE=y CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SYSVIPC=y diff --git a/arch/arm/include/asm/flat.h b/arch/arm/include/asm/flat.h index 59426a4..e847d23 100644 --- a/arch/arm/include/asm/flat.h +++ b/arch/arm/include/asm/flat.h @@ -8,7 +8,7 @@ #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) -#define flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp) +#define flat_get_addr_from_rp(rp, relval, flags, persistent) ((void)persistent,get_unaligned(rp)) #define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) #define flat_get_relocate_addr(rel) (rel) #define flat_set_persistent(relval, p) 0 diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 35c1ed8..42f042e 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -64,7 +64,7 @@ extern void __raw_readsl(const void __iomem *addr, void *data, int longlen); static inline void __raw_writew(u16 val, volatile void __iomem *addr) { asm volatile("strh %1, %0" - : "+Qo" (*(volatile u16 __force *)addr) + : "+Q" (*(volatile u16 __force *)addr) : "r" (val)); } @@ -72,7 +72,7 @@ static inline u16 __raw_readw(const volatile void __iomem *addr) { u16 val; asm volatile("ldrh %1, %0" - : "+Qo" (*(volatile u16 __force *)addr), + : "+Q" (*(volatile u16 __force *)addr), "=r" (val)); return val; } diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h index 05b8e82..e3f7572 100644 --- a/arch/arm/include/asm/sched_clock.h +++ b/arch/arm/include/asm/sched_clock.h @@ -10,7 +10,5 @@ extern void sched_clock_postinit(void); extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate); -extern void setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, - unsigned long rate); #endif diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 77bd79f..7e1f760 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -200,8 +200,8 @@ extern int __put_user_8(void *, unsigned long long); #define USER_DS KERNEL_DS #define segment_eq(a,b) (1) -#define __addr_ok(addr) (1) -#define __range_ok(addr,size) (0) +#define __addr_ok(addr) ((void)(addr),1) +#define __range_ok(addr,size) ((void)(addr),0) #define get_fs() (KERNEL_DS) static inline void set_fs(mm_segment_t fs) diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h index 6a6f1e4..301c1db 100644 --- a/arch/arm/include/asm/vfpmacros.h +++ b/arch/arm/include/asm/vfpmacros.h @@ -27,9 +27,9 @@ #if __LINUX_ARM_ARCH__ <= 6 ldr \tmp, =elf_hwcap @ may not have MVFR regs ldr \tmp, [\tmp, #0] - tst \tmp, #HWCAP_VFPv3D16 - ldceql p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} - addne \base, \base, #32*4 @ step over unused register space + tst \tmp, #HWCAP_VFPD32 + ldcnel p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} + addeq \base, \base, #32*4 @ step over unused register space #else VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field @@ -51,9 +51,9 @@ #if __LINUX_ARM_ARCH__ <= 6 ldr \tmp, =elf_hwcap @ may not have MVFR regs ldr \tmp, [\tmp, #0] - tst \tmp, #HWCAP_VFPv3D16 - stceql p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} - addne \base, \base, #32*4 @ step over unused register space + tst \tmp, #HWCAP_VFPD32 + stcnel p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} + addeq \base, \base, #32*4 @ step over unused register space #else VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field diff --git a/arch/arm/include/asm/xen/interface.h b/arch/arm/include/asm/xen/interface.h index ae05e56..5000397 100644 --- a/arch/arm/include/asm/xen/interface.h +++ b/arch/arm/include/asm/xen/interface.h @@ -29,16 +29,22 @@ #ifndef __ASSEMBLY__ /* Explicitly size integers that represent pfns in the interface with - * Xen so that we can have one ABI that works for 32 and 64 bit guests. */ + * Xen so that we can have one ABI that works for 32 and 64 bit guests. + * Note that this means that the xen_pfn_t type may be capable of + * representing pfn's which the guest cannot represent in its own pfn + * type. However since pfn space is controlled by the guest this is + * fine since it simply wouldn't be able to create any sure pfns in + * the first place. + */ typedef uint64_t xen_pfn_t; +#define PRI_xen_pfn "llx" typedef uint64_t xen_ulong_t; +#define PRI_xen_ulong "llx" /* Guest handles for primitive C types. */ __DEFINE_GUEST_HANDLE(uchar, unsigned char); __DEFINE_GUEST_HANDLE(uint, unsigned int); -__DEFINE_GUEST_HANDLE(ulong, unsigned long); DEFINE_GUEST_HANDLE(char); DEFINE_GUEST_HANDLE(int); -DEFINE_GUEST_HANDLE(long); DEFINE_GUEST_HANDLE(void); DEFINE_GUEST_HANDLE(uint64_t); DEFINE_GUEST_HANDLE(uint32_t); diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h index 1742023..c6b9096 100644 --- a/arch/arm/include/asm/xen/page.h +++ b/arch/arm/include/asm/xen/page.h @@ -10,7 +10,7 @@ #include <xen/interface/grant_table.h> #define pfn_to_mfn(pfn) (pfn) -#define phys_to_machine_mapping_valid (1) +#define phys_to_machine_mapping_valid(pfn) (1) #define mfn_to_pfn(mfn) (mfn) #define mfn_to_virt(m) (__va(mfn_to_pfn(m) << PAGE_SHIFT)) @@ -30,6 +30,8 @@ typedef struct xpaddr { #define XMADDR(x) ((xmaddr_t) { .maddr = (x) }) #define XPADDR(x) ((xpaddr_t) { .paddr = (x) }) +#define INVALID_P2M_ENTRY (~0UL) + static inline xmaddr_t phys_to_machine(xpaddr_t phys) { unsigned offset = phys.paddr & ~PAGE_MASK; @@ -74,9 +76,14 @@ static inline int m2p_remove_override(struct page *page, bool clear_pte) return 0; } +static inline bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn) +{ + BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY); + return true; +} + static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn) { - BUG(); - return false; + return __set_phys_to_machine(pfn, mfn); } #endif /* _ASM_ARM_XEN_PAGE_H */ diff --git a/arch/arm/include/debug/8250_32.S b/arch/arm/include/debug/8250_32.S new file mode 100644 index 0000000..8db01ee --- /dev/null +++ b/arch/arm/include/debug/8250_32.S @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2011 Picochip Ltd., Jamie Iles + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit + * accesses to the 8250. + */ + +#include <linux/serial_reg.h> + + .macro senduart,rd,rx + str \rd, [\rx, #UART_TX << UART_SHIFT] + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT] + and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE + teq \rd, #UART_LSR_TEMT | UART_LSR_THRE + bne 1002b + .endm + + /* The UART's don't have any flow control IO's wired up. */ + .macro waituart,rd,rx + .endm diff --git a/arch/arm/include/debug/picoxcell.S b/arch/arm/include/debug/picoxcell.S index 7419deb..bc1f07c4 100644 --- a/arch/arm/include/debug/picoxcell.S +++ b/arch/arm/include/debug/picoxcell.S @@ -5,10 +5,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit - * accesses to the 8250. */ -#include <linux/serial_reg.h> #define UART_SHIFT 2 #define PICOXCELL_UART1_BASE 0x80230000 @@ -19,17 +16,4 @@ ldr \rp, =PICOXCELL_UART1_BASE .endm - .macro senduart,rd,rx - str \rd, [\rx, #UART_TX << UART_SHIFT] - .endm - - .macro busyuart,rd,rx -1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT] - and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE - teq \rd, #UART_LSR_TEMT | UART_LSR_THRE - bne 1002b - .endm - - /* The UART's don't have any flow control IO's wired up. */ - .macro waituart,rd,rx - .endm +#include "8250_32.S" diff --git a/arch/arm/include/debug/socfpga.S b/arch/arm/include/debug/socfpga.S index d6f26d2..966b2f9 100644 --- a/arch/arm/include/debug/socfpga.S +++ b/arch/arm/include/debug/socfpga.S @@ -7,6 +7,9 @@ * published by the Free Software Foundation. */ +#define UART_SHIFT 2 +#define DEBUG_LL_UART_OFFSET 0x00002000 + .macro addruart, rp, rv, tmp mov \rp, #DEBUG_LL_UART_OFFSET orr \rp, \rp, #0x00c00000 @@ -14,3 +17,5 @@ orr \rp, \rp, #0xff000000 @ physical base .endm +#include "8250_32.S" + diff --git a/arch/arm/include/uapi/asm/hwcap.h b/arch/arm/include/uapi/asm/hwcap.h index f254f65..3688fd1 100644 --- a/arch/arm/include/uapi/asm/hwcap.h +++ b/arch/arm/include/uapi/asm/hwcap.h @@ -18,11 +18,12 @@ #define HWCAP_THUMBEE (1 << 11) #define HWCAP_NEON (1 << 12) #define HWCAP_VFPv3 (1 << 13) -#define HWCAP_VFPv3D16 (1 << 14) +#define HWCAP_VFPv3D16 (1 << 14) /* also set for VFPv4-D16 */ #define HWCAP_TLS (1 << 15) #define HWCAP_VFPv4 (1 << 16) #define HWCAP_IDIVA (1 << 17) #define HWCAP_IDIVT (1 << 18) +#define HWCAP_VFPD32 (1 << 19) /* set if VFP has 32 regs (not 16) */ #define HWCAP_IDIV (HWCAP_IDIVA | HWCAP_IDIVT) diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 417bac1..3471175 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -88,9 +88,9 @@ ENTRY(ret_from_fork) bl schedule_tail cmp r5, #0 movne r0, r4 - movne lr, pc + adrne lr, BSYM(1f) movne pc, r5 - get_thread_info tsk +1: get_thread_info tsk b ret_slow_syscall ENDPROC(ret_from_fork) diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 16cedb4..8961650 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -34,6 +34,7 @@ #include <linux/list.h> #include <linux/kallsyms.h> #include <linux/proc_fs.h> +#include <linux/export.h> #include <asm/exception.h> #include <asm/mach/arch.h> @@ -109,6 +110,7 @@ void set_irq_flags(unsigned int irq, unsigned int iflags) /* Order is clear bits in "clr" then set bits in "set" */ irq_modify_status(irq, clr, set & ~clr); } +EXPORT_SYMBOL_GPL(set_irq_flags); void __init init_IRQ(void) { diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index 38c1a3b..8393129 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -366,7 +366,9 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED(".word 0xe04f0392 @ umaal r0, pc, r2, r3") TEST_UNSUPPORTED(".word 0xe0500090 @ undef") TEST_UNSUPPORTED(".word 0xe05fff9f @ undef") +#endif +#if __LINUX_ARM_ARCH__ >= 7 TEST_RRR( "mls r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"") TEST_RRR( "mlshi r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"") TEST_RR( "mls lr, r",1, VAL2,", r",2, VAL3,", r13") @@ -456,6 +458,8 @@ void kprobe_arm_test_cases(void) TEST_UNSUPPORTED(".word 0xe1700090") /* Unallocated space */ #if __LINUX_ARM_ARCH__ >= 6 TEST_UNSUPPORTED("ldrex r2, [sp]") +#endif +#if (__LINUX_ARM_ARCH__ >= 7) || defined(CONFIG_CPU_32v6K) TEST_UNSUPPORTED("strexd r0, r2, r3, [sp]") TEST_UNSUPPORTED("ldrexd r2, r3, [sp]") TEST_UNSUPPORTED("strexb r0, r2, [sp]") diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index e29c333..8ef8c93 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -45,10 +45,9 @@ int machine_kexec_prepare(struct kimage *image) for (i = 0; i < image->nr_segments; i++) { current_segment = &image->segment[i]; - err = memblock_is_region_memory(current_segment->mem, - current_segment->memsz); - if (err) - return - EINVAL; + if (!memblock_is_region_memory(current_segment->mem, + current_segment->memsz)) + return -EINVAL; err = get_user(header, (__be32*)current_segment->buf); if (err) diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 93971b1..53c0304 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -96,6 +96,10 @@ armpmu_event_set_period(struct perf_event *event, s64 period = hwc->sample_period; int ret = 0; + /* The period may have been changed by PERF_EVENT_IOC_PERIOD */ + if (unlikely(period != hwc->last_period)) + left = period - (hwc->last_period - left); + if (unlikely(left <= -period)) { left = period; local64_set(&hwc->period_left, left); diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index e21bac2..fc6692e 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -107,13 +107,6 @@ static void sched_clock_poll(unsigned long wrap_ticks) update_sched_clock(); } -void __init setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, - unsigned long rate) -{ - setup_sched_clock(read, bits, rate); - cd.needs_suspend = true; -} - void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) { unsigned long r, w; @@ -189,18 +182,15 @@ void __init sched_clock_postinit(void) static int sched_clock_suspend(void) { sched_clock_poll(sched_clock_timer.data); - if (cd.needs_suspend) - cd.suspended = true; + cd.suspended = true; return 0; } static void sched_clock_resume(void) { - if (cd.needs_suspend) { - cd.epoch_cyc = read_sched_clock(); - cd.epoch_cyc_copy = cd.epoch_cyc; - cd.suspended = false; - } + cd.epoch_cyc = read_sched_clock(); + cd.epoch_cyc_copy = cd.epoch_cyc; + cd.suspended = false; } static struct syscore_ops sched_clock_ops = { diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 8e20754d..fbc8b26 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -294,18 +294,24 @@ static void percpu_timer_setup(void); asmlinkage void __cpuinit secondary_start_kernel(void) { struct mm_struct *mm = &init_mm; - unsigned int cpu = smp_processor_id(); + unsigned int cpu; + + /* + * The identity mapping is uncached (strongly ordered), so + * switch away from it before attempting any exclusive accesses. + */ + cpu_switch_mm(mm->pgd, mm); + enter_lazy_tlb(mm, current); + local_flush_tlb_all(); /* * All kernel threads share the same mm context; grab a * reference and switch to it. */ + cpu = smp_processor_id(); atomic_inc(&mm->mm_count); current->active_mm = mm; cpumask_set_cpu(cpu, mm_cpumask(mm)); - cpu_switch_mm(mm->pgd, mm); - enter_lazy_tlb(mm, current); - local_flush_tlb_all(); printk("CPU%u: Booted secondary processor\n", cpu); diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index e1f9069..b22d700 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -42,10 +42,10 @@ static void twd_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - /* timer load already set up */ ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_PERIODIC; - __raw_writel(twd_timer_rate / HZ, twd_base + TWD_TIMER_LOAD); + __raw_writel(DIV_ROUND_CLOSEST(twd_timer_rate, HZ), + twd_base + TWD_TIMER_LOAD); break; case CLOCK_EVT_MODE_ONESHOT: /* period set, and timer enabled in 'next_event' hook */ diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index 9d0a300..0dc5385 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -45,6 +45,7 @@ int read_current_timer(unsigned long *timer_val) *timer_val = delay_timer->read_current_timer(); return 0; } +EXPORT_SYMBOL_GPL(read_current_timer); static void __timer_delay(unsigned long cycles) { diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index b142071..0436242 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -21,19 +21,13 @@ config SOC_AT91SAM9 bool select CPU_ARM926T select GENERIC_CLOCKEVENTS + select MULTI_IRQ_HANDLER + select SPARSE_IRQ menu "Atmel AT91 System-on-Chip" comment "Atmel AT91 Processor" -config SOC_AT91SAM9 - bool - select AT91_SAM9_SMC - select AT91_SAM9_TIME - select CPU_ARM926T - select MULTI_IRQ_HANDLER - select SPARSE_IRQ - config SOC_AT91RM9200 bool "AT91RM9200" select CPU_ARM920T diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index b4f0565..5269825 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -187,7 +187,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200.0", &twi_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index a563189..3cee0e6 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -68,7 +68,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable overcurrent notification */ for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) + if (gpio_is_valid(data->overcurrent_pin[i])) at91_set_gpio_input(data->overcurrent_pin[i], 1); } @@ -479,7 +479,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91rm9200_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -512,7 +512,7 @@ static struct resource twi_resources[] = { static struct platform_device at91rm9200_twi_device = { .name = "i2c-at91rm9200", - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index ad29f93..f820261 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -211,8 +211,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi_clk), /* more usart lookup table for DT entries */ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk), diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index a76b868..414bd85 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -72,7 +72,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable overcurrent notification */ for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) + if (gpio_is_valid(data->overcurrent_pin[i])) at91_set_gpio_input(data->overcurrent_pin[i], 1); } @@ -389,7 +389,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9260_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -421,7 +421,7 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9260_twi_device = { - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index 8d999eb..04295c0 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -178,8 +178,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261", &twi_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261.0", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi_clk), CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 9752f17..cd604aa 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -72,7 +72,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable overcurrent notification */ for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) + if (gpio_is_valid(data->overcurrent_pin[i])) at91_set_gpio_input(data->overcurrent_pin[i], 1); } @@ -285,7 +285,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9261_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -317,7 +317,7 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9261_twi_device = { - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 6a01d03..d6f9c23 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -193,7 +193,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), - CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 8dde220..9c61e59 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -78,7 +78,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) /* Enable overcurrent notification */ for (i = 0; i < data->ports; i++) { - if (data->overcurrent_pin[i]) + if (gpio_is_valid(data->overcurrent_pin[i])) at91_set_gpio_input(data->overcurrent_pin[i], 1); } @@ -567,7 +567,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9263_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -600,7 +600,7 @@ static struct resource twi_resources[] = { static struct platform_device at91sam9263_twi_device = { .name = "i2c-at91sam9260", - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index b159607..fcd233c 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1841,8 +1841,8 @@ static struct resource sha_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_AESTDESSHA, - .end = AT91SAM9G45_ID_AESTDESSHA, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, .flags = IORESOURCE_IRQ, }, }; @@ -1874,8 +1874,8 @@ static struct resource tdes_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_AESTDESSHA, - .end = AT91SAM9G45_ID_AESTDESSHA, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, .flags = IORESOURCE_IRQ, }, }; @@ -1910,8 +1910,8 @@ static struct resource aes_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_AESTDESSHA, - .end = AT91SAM9G45_ID_AESTDESSHA, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index d6ca054..5047bdc 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -314,7 +314,7 @@ static struct i2c_gpio_platform_data pdata = { static struct platform_device at91sam9rl_twi_device = { .name = "i2c-gpio", - .id = -1, + .id = 0, .dev.platform_data = &pdata, }; @@ -347,7 +347,7 @@ static struct resource twi_resources[] = { static struct platform_device at91sam9rl_twi_device = { .name = "i2c-at91sam9g20", - .id = -1, + .id = 0, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), }; diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index 6bd7300..bb7f544 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -88,6 +88,6 @@ void __init at91x40_init_interrupts(unsigned int priority[NR_AIC_IRQS]) if (!priority) priority = at91x40_default_irq_priority; - at91_aic_init(priority); + at91_aic_init(priority, at91_extern_irq); } diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 9cda3fd..6960778 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -129,7 +129,7 @@ static struct spi_board_info neocore926_spi_devices[] = { .max_speed_hz = 125000 * 16, .bus_num = 0, .platform_data = &ads_info, - .irq = AT91SAM9263_ID_IRQ1, + .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1, }, #endif }; diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 27b3af1..a9167dd 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -309,7 +309,7 @@ static struct spi_board_info ek_spi_devices[] = { .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ .bus_num = 0, .platform_data = &ads_info, - .irq = AT91SAM9261_ID_IRQ0, + .irq = NR_IRQS_LEGACY + AT91SAM9261_ID_IRQ0, .controller_data = (void *) AT91_PIN_PA28, /* CS pin */ }, #endif diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 073e174..b87dbe2 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -132,7 +132,7 @@ static struct spi_board_info ek_spi_devices[] = { .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ .bus_num = 0, .platform_data = &ads_info, - .irq = AT91SAM9263_ID_IRQ1, + .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1, }, #endif }; diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index f496506..b62f560e 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -26,7 +26,8 @@ extern void __init at91_dt_initialize(void); extern void __init at91_init_irq_default(void); extern void __init at91_init_interrupts(unsigned int priority[]); extern void __init at91x40_init_interrupts(unsigned int priority[]); -extern void __init at91_aic_init(unsigned int priority[]); +extern void __init at91_aic_init(unsigned int priority[], + unsigned int ext_irq_mask); extern int __init at91_aic_of_init(struct device_node *node, struct device_node *parent); extern int __init at91_aic5_of_init(struct device_node *node, diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index 1e02c0e..febc2ee 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -502,14 +502,19 @@ int __init at91_aic5_of_init(struct device_node *node, /* * Initialize the AIC interrupt controller. */ -void __init at91_aic_init(unsigned int *priority) +void __init at91_aic_init(unsigned int *priority, unsigned int ext_irq_mask) { unsigned int i; int irq_base; - if (at91_aic_pm_init()) + at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs) + * sizeof(*at91_extern_irq), GFP_KERNEL); + + if (at91_aic_pm_init() || at91_extern_irq == NULL) panic("Unable to allocate bit maps\n"); + *at91_extern_irq = ext_irq_mask; + at91_aic_base = ioremap(AT91_AIC, 512); if (!at91_aic_base) panic("Unable to ioremap AIC registers\n"); diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index da9881b..0b32c81 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -47,7 +47,7 @@ void __init at91_init_irq_default(void) void __init at91_init_interrupts(unsigned int *priority) { /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); + at91_aic_init(priority, at91_extern_irq); /* Enable GPIO interrupts */ at91_gpio_irq_setup(); @@ -151,7 +151,7 @@ static void __init soc_detect(u32 dbgu_base) } /* at91sam9g10 */ - if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { + if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { at91_soc_initdata.type = AT91_SOC_SAM9G10; at91_boot_soc = at91sam9261_soc; } diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index f8eecb9..0153950 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -58,6 +58,14 @@ config ARCH_DAVINCI_TNETV107X comment "DaVinci Board Type" +config MACH_DA8XX_DT + bool "Support DA8XX platforms using device tree" + default y + depends on ARCH_DAVINCI_DA8XX + help + Say y here to include support for TI DaVinci DA850 based using + Flattened Device Tree. More information at Documentation/devicetree + config MACH_DAVINCI_EVM bool "TI DM644x EVM" default ARCH_DAVINCI_DM644x diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 2227eff..fb5c1aa 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_AINTC) += irq.o obj-$(CONFIG_CP_INTC) += cp_intc.o # Board specific +obj-$(CONFIG_MACH_DA8XX_DT) += da8xx-dt.o obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o obj-$(CONFIG_MACH_NEUROS_OSD2) += board-neuros-osd2.o diff --git a/arch/arm/mach-davinci/Makefile.boot b/arch/arm/mach-davinci/Makefile.boot index 04a6c4e..5c5a95a 100644 --- a/arch/arm/mach-davinci/Makefile.boot +++ b/arch/arm/mach-davinci/Makefile.boot @@ -11,3 +11,5 @@ else params_phys-y := 0x80000100 initrd_phys-y := 0x80800000 endif + +dtb-$(CONFIG_MACH_DA8XX_DT) += da850-enbw-cmc.dtb da850-evm.dtb diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 32ee3f8..d4f4dbf 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -11,39 +11,40 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ -#include <linux/kernel.h> -#include <linux/init.h> #include <linux/console.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/init.h> +#include <linux/kernel.h> #include <linux/i2c.h> #include <linux/i2c/at24.h> #include <linux/i2c/pca953x.h> #include <linux/input.h> +#include <linux/input/tps6507x-ts.h> #include <linux/mfd/tps6507x.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> +#include <linux/platform_device.h> +#include <linux/platform_data/mtd-davinci.h> +#include <linux/platform_data/mtd-davinci-aemif.h> +#include <linux/platform_data/spi-davinci.h> +#include <linux/platform_data/uio_pruss.h> #include <linux/regulator/machine.h> #include <linux/regulator/tps6507x.h> -#include <linux/input/tps6507x-ts.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> -#include <linux/delay.h> #include <linux/wl12xx.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/system_info.h> - #include <mach/cp_intc.h> #include <mach/da8xx.h> -#include <linux/platform_data/mtd-davinci.h> #include <mach/mux.h> -#include <linux/platform_data/mtd-davinci-aemif.h> -#include <linux/platform_data/spi-davinci.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/system_info.h> #include <media/tvp514x.h> #include <media/adv7343.h> @@ -1516,6 +1517,11 @@ static __init void da850_evm_init(void) pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n", ret); + ret = da8xx_register_uio_pruss(); + if (ret) + pr_warn("da850_evm_init: pruss initialization failed: %d\n", + ret); + /* Handle board specific muxing for LCD here */ ret = davinci_cfg_reg_list(da850_evm_lcdc_pins); if (ret) diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 88ebea8..cdf8d07 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -324,7 +324,7 @@ static __init void dm355_evm_init(void) if (IS_ERR(aemif)) WARN("%s: unable to get AEMIF clock\n", __func__); else - clk_enable(aemif); + clk_prepare_enable(aemif); platform_add_devices(davinci_evm_devices, ARRAY_SIZE(davinci_evm_devices)); diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 2f88103..d419545 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -246,7 +246,7 @@ static __init void dm355_leopard_init(void) if (IS_ERR(aemif)) WARN("%s: unable to get AEMIF clock\n", __func__); else - clk_enable(aemif); + clk_prepare_enable(aemif); platform_add_devices(davinci_leopard_devices, ARRAY_SIZE(davinci_leopard_devices)); diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 1b4a8ad..5d49c75 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -478,7 +478,7 @@ static void __init evm_init_cpld(void) aemif_clk = clk_get(NULL, "aemif"); if (IS_ERR(aemif_clk)) return; - clk_enable(aemif_clk); + clk_prepare_enable(aemif_clk); if (request_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE, "cpld") == NULL) @@ -489,7 +489,7 @@ static void __init evm_init_cpld(void) SECTION_SIZE); fail: pr_err("ERROR: can't map CPLD\n"); - clk_disable(aemif_clk); + clk_disable_unprepare(aemif_clk); return; } diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index f22572ce..a84dfcb 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -776,7 +776,7 @@ static __init void davinci_evm_init(void) struct davinci_soc_info *soc_info = &davinci_soc_info; aemif_clk = clk_get(NULL, "aemif"); - clk_enable(aemif_clk); + clk_prepare_enable(aemif_clk); if (HAS_ATA) { if (HAS_NAND || HAS_NOR) diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 144bf31..3e3e3af 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -188,7 +188,7 @@ static __init void davinci_ntosd2_init(void) struct davinci_soc_info *soc_info = &davinci_soc_info; aemif_clk = clk_get(NULL, "aemif"); - clk_enable(aemif_clk); + clk_prepare_enable(aemif_clk); if (HAS_ATA) { if (HAS_NAND) diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index b90c172..68c5fe0 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -212,6 +212,12 @@ static struct clk tptc2_clk = { .flags = ALWAYS_ENABLED, }; +static struct clk pruss_clk = { + .name = "pruss", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC0_PRUSS, +}; + static struct clk uart0_clk = { .name = "uart0", .parent = &pll0_sysclk2, @@ -385,6 +391,7 @@ static struct clk_lookup da850_clks[] = { CLK(NULL, "tptc1", &tptc1_clk), CLK(NULL, "tpcc1", &tpcc1_clk), CLK(NULL, "tptc2", &tptc2_clk), + CLK("pruss_uio", "pruss", &pruss_clk), CLK(NULL, "uart0", &uart0_clk), CLK(NULL, "uart1", &uart1_clk), CLK(NULL, "uart2", &uart2_clk), @@ -781,12 +788,6 @@ static struct map_desc da850_io_desc[] = { .length = DA8XX_CP_INTC_SIZE, .type = MT_DEVICE }, - { - .virtual = SRAM_VIRT, - .pfn = __phys_to_pfn(DA8XX_ARM_RAM_BASE), - .length = SZ_8K, - .type = MT_DEVICE - }, }; static u32 da850_psc_bases[] = { DA8XX_PSC0_BASE, DA8XX_PSC1_BASE }; @@ -1239,8 +1240,8 @@ static struct davinci_soc_info davinci_soc_info_da850 = { .gpio_irq = IRQ_DA8XX_GPIO0, .serial_dev = &da8xx_serial_device, .emac_pdata = &da8xx_emac_pdata, - .sram_dma = DA8XX_ARM_RAM_BASE, - .sram_len = SZ_8K, + .sram_dma = DA8XX_SHARED_RAM_BASE, + .sram_len = SZ_128K, }; void __init da850_init(void) diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c new file mode 100644 index 0000000..37c27af --- /dev/null +++ b/arch/arm/mach-davinci/da8xx-dt.c @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * Modified from mach-omap/omap2/board-generic.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/io.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/irqdomain.h> + +#include <asm/mach/arch.h> + +#include <mach/common.h> +#include <mach/cp_intc.h> +#include <mach/da8xx.h> + +#define DA8XX_NUM_UARTS 3 + +void __init da8xx_uart_clk_enable(void) +{ + int i; + for (i = 0; i < DA8XX_NUM_UARTS; i++) + davinci_serial_setup_clk(i, NULL); +} + +static struct of_device_id da8xx_irq_match[] __initdata = { + { .compatible = "ti,cp-intc", .data = cp_intc_of_init, }, + { } +}; + +static void __init da8xx_init_irq(void) +{ + of_irq_init(da8xx_irq_match); +} + +#ifdef CONFIG_ARCH_DAVINCI_DA850 + +static void __init da850_init_machine(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + + da8xx_uart_clk_enable(); +} + +static const char *da850_boards_compat[] __initdata = { + "enbw,cmc", + "ti,da850-evm", + "ti,da850", + NULL, +}; + +DT_MACHINE_START(DA850_DT, "Generic DA850/OMAP-L138/AM18x") + .map_io = da850_init, + .init_irq = da8xx_init_irq, + .timer = &davinci_timer, + .init_machine = da850_init_machine, + .dt_compat = da850_boards_compat, + .init_late = davinci_init_late, + .restart = da8xx_restart, +MACHINE_END + +#endif diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index bd2f72b..46c9a0c 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -22,6 +22,7 @@ #include <mach/time.h> #include <mach/da8xx.h> #include <mach/cpuidle.h> +#include <mach/sram.h> #include "clock.h" #include "asp.h" @@ -32,6 +33,7 @@ #define DA8XX_WDOG_BASE 0x01c21000 /* DA8XX_TIMER64P1_BASE */ #define DA8XX_I2C0_BASE 0x01c22000 #define DA8XX_RTC_BASE 0x01c23000 +#define DA8XX_PRUSS_MEM_BASE 0x01c30000 #define DA8XX_MMCSD0_BASE 0x01c40000 #define DA8XX_SPI0_BASE 0x01c41000 #define DA830_SPI1_BASE 0x01e12000 @@ -518,6 +520,75 @@ void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata) } } +static struct resource da8xx_pruss_resources[] = { + { + .start = DA8XX_PRUSS_MEM_BASE, + .end = DA8XX_PRUSS_MEM_BASE + 0xFFFF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DA8XX_EVTOUT0, + .end = IRQ_DA8XX_EVTOUT0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT1, + .end = IRQ_DA8XX_EVTOUT1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT2, + .end = IRQ_DA8XX_EVTOUT2, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT3, + .end = IRQ_DA8XX_EVTOUT3, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT4, + .end = IRQ_DA8XX_EVTOUT4, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT5, + .end = IRQ_DA8XX_EVTOUT5, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT6, + .end = IRQ_DA8XX_EVTOUT6, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT7, + .end = IRQ_DA8XX_EVTOUT7, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct uio_pruss_pdata da8xx_uio_pruss_pdata = { + .pintc_base = 0x4000, +}; + +static struct platform_device da8xx_uio_pruss_dev = { + .name = "pruss_uio", + .id = -1, + .num_resources = ARRAY_SIZE(da8xx_pruss_resources), + .resource = da8xx_pruss_resources, + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &da8xx_uio_pruss_pdata, + } +}; + +int __init da8xx_register_uio_pruss(void) +{ + da8xx_uio_pruss_pdata.sram_pool = sram_get_gen_pool(); + return platform_device_register(&da8xx_uio_pruss_dev); +} + static const struct display_panel disp_panel = { QVGA, 16, @@ -900,7 +971,7 @@ static int da850_sata_init(struct device *dev, void __iomem *addr) if (IS_ERR(da850_sata_clk)) return PTR_ERR(da850_sata_clk); - ret = clk_enable(da850_sata_clk); + ret = clk_prepare_enable(da850_sata_clk); if (ret) goto err0; @@ -931,7 +1002,7 @@ static int da850_sata_init(struct device *dev, void __iomem *addr) return 0; err1: - clk_disable(da850_sata_clk); + clk_disable_unprepare(da850_sata_clk); err0: clk_put(da850_sata_clk); return ret; @@ -939,7 +1010,7 @@ err0: static void da850_sata_exit(struct device *dev) { - clk_disable(da850_sata_clk); + clk_disable_unprepare(da850_sata_clk); clk_put(da850_sata_clk); } diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index a255434..b49c3b7 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -758,12 +758,6 @@ static struct map_desc dm355_io_desc[] = { .length = IO_SIZE, .type = MT_DEVICE }, - { - .virtual = SRAM_VIRT, - .pfn = __phys_to_pfn(0x00010000), - .length = SZ_32K, - .type = MT_MEMORY_NONCACHED, - }, }; /* Contents of JTAG ID register used to identify exact cpu type */ diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index b680c83..6c39805 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -985,12 +985,6 @@ static struct map_desc dm365_io_desc[] = { .length = IO_SIZE, .type = MT_DEVICE }, - { - .virtual = SRAM_VIRT, - .pfn = __phys_to_pfn(0x00010000), - .length = SZ_32K, - .type = MT_MEMORY_NONCACHED, - }, }; static struct resource dm365_ks_resources[] = { diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index cd0c8b1..9ab1f10 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -786,12 +786,6 @@ static struct map_desc dm644x_io_desc[] = { .length = IO_SIZE, .type = MT_DEVICE }, - { - .virtual = SRAM_VIRT, - .pfn = __phys_to_pfn(0x00008000), - .length = SZ_16K, - .type = MT_MEMORY_NONCACHED, - }, }; /* Contents of JTAG ID register used to identify exact cpu type */ diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 97c0f8e..ac7b431 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -756,12 +756,6 @@ static struct map_desc dm646x_io_desc[] = { .length = IO_SIZE, .type = MT_DEVICE }, - { - .virtual = SRAM_VIRT, - .pfn = __phys_to_pfn(0x00010000), - .length = SZ_32K, - .type = MT_MEMORY_NONCACHED, - }, }; /* Contents of JTAG ID register used to identify exact cpu type */ diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index bdc4aa8..046c723 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -104,8 +104,6 @@ int davinci_pm_init(void); static inline int davinci_pm_init(void) { return 0; } #endif -/* standard place to map on-chip SRAMs; they *may* support DMA */ -#define SRAM_VIRT 0xfffe0000 #define SRAM_SIZE SZ_128K #endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */ diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index aaccdc4..700d311 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -26,6 +26,7 @@ #include <linux/platform_data/mmc-davinci.h> #include <linux/platform_data/usb-davinci.h> #include <linux/platform_data/spi-davinci.h> +#include <linux/platform_data/uio_pruss.h> #include <media/davinci/vpif_types.h> @@ -72,6 +73,7 @@ extern unsigned int da850_max_speed; #define DA8XX_AEMIF_CS2_BASE 0x60000000 #define DA8XX_AEMIF_CS3_BASE 0x62000000 #define DA8XX_AEMIF_CTL_BASE 0x68000000 +#define DA8XX_SHARED_RAM_BASE 0x80000000 #define DA8XX_ARM_RAM_BASE 0xffff0000 void __init da830_init(void); @@ -86,6 +88,7 @@ int da8xx_register_watchdog(void); int da8xx_register_usb20(unsigned mA, unsigned potpgt); int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata); int da8xx_register_emac(void); +int da8xx_register_uio_pruss(void); int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata); int da8xx_register_mmcsd0(struct davinci_mmc_config *config); int da850_register_mmcsd1(struct davinci_mmc_config *config); diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index 46b3cd1..2d9d921 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -43,6 +43,7 @@ struct davinci_uart_config { }; extern int davinci_serial_init(struct davinci_uart_config *); +extern int davinci_serial_setup_clk(unsigned instance, unsigned int *rate); #endif #endif /* __ASM_ARCH_SERIAL_H */ diff --git a/arch/arm/mach-davinci/include/mach/sram.h b/arch/arm/mach-davinci/include/mach/sram.h index 111f7cc..4e5db56 100644 --- a/arch/arm/mach-davinci/include/mach/sram.h +++ b/arch/arm/mach-davinci/include/mach/sram.h @@ -24,4 +24,7 @@ extern void *sram_alloc(size_t len, dma_addr_t *dma); extern void sram_free(void *addr, size_t len); +/* Get the struct gen_pool * for use in platform data */ +extern struct gen_pool *sram_get_gen_pool(void); + #endif /* __MACH_SRAM_H */ diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c index 1875740..f262581 100644 --- a/arch/arm/mach-davinci/serial.c +++ b/arch/arm/mach-davinci/serial.c @@ -70,11 +70,33 @@ static void __init davinci_serial_reset(struct plat_serial8250_port *p) UART_DM646X_SCR_TX_WATERMARK); } -int __init davinci_serial_init(struct davinci_uart_config *info) +/* Enable UART clock and obtain its rate */ +int __init davinci_serial_setup_clk(unsigned instance, unsigned int *rate) { - int i; char name[16]; - struct clk *uart_clk; + struct clk *clk; + struct davinci_soc_info *soc_info = &davinci_soc_info; + struct device *dev = &soc_info->serial_dev->dev; + + sprintf(name, "uart%d", instance); + clk = clk_get(dev, name); + if (IS_ERR(clk)) { + pr_err("%s:%d: failed to get UART%d clock\n", + __func__, __LINE__, instance); + return PTR_ERR(clk); + } + + clk_prepare_enable(clk); + + if (rate) + *rate = clk_get_rate(clk); + + return 0; +} + +int __init davinci_serial_init(struct davinci_uart_config *info) +{ + int i, ret; struct davinci_soc_info *soc_info = &davinci_soc_info; struct device *dev = &soc_info->serial_dev->dev; struct plat_serial8250_port *p = dev->platform_data; @@ -87,16 +109,9 @@ int __init davinci_serial_init(struct davinci_uart_config *info) if (!(info->enabled_uarts & (1 << i))) continue; - sprintf(name, "uart%d", i); - uart_clk = clk_get(dev, name); - if (IS_ERR(uart_clk)) { - printk(KERN_ERR "%s:%d: failed to get UART%d clock\n", - __func__, __LINE__, i); + ret = davinci_serial_setup_clk(i, &p->uartclk); + if (ret) continue; - } - - clk_enable(uart_clk); - p->uartclk = clk_get_rate(uart_clk); if (!p->membase && p->mapbase) { p->membase = ioremap(p->mapbase, SZ_4K); diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c index db0f778..c5f7ee5 100644 --- a/arch/arm/mach-davinci/sram.c +++ b/arch/arm/mach-davinci/sram.c @@ -10,6 +10,7 @@ */ #include <linux/module.h> #include <linux/init.h> +#include <linux/io.h> #include <linux/genalloc.h> #include <mach/common.h> @@ -17,6 +18,11 @@ static struct gen_pool *sram_pool; +struct gen_pool *sram_get_gen_pool(void) +{ + return sram_pool; +} + void *sram_alloc(size_t len, dma_addr_t *dma) { unsigned long vaddr; @@ -32,7 +38,7 @@ void *sram_alloc(size_t len, dma_addr_t *dma) return NULL; if (dma) - *dma = dma_base + (vaddr - SRAM_VIRT); + *dma = gen_pool_virt_to_phys(sram_pool, vaddr); return (void *)vaddr; } @@ -53,8 +59,10 @@ EXPORT_SYMBOL(sram_free); */ static int __init sram_init(void) { + phys_addr_t phys = davinci_soc_info.sram_dma; unsigned len = davinci_soc_info.sram_len; int status = 0; + void *addr; if (len) { len = min_t(unsigned, len, SRAM_SIZE); @@ -62,8 +70,17 @@ static int __init sram_init(void) if (!sram_pool) status = -ENOMEM; } - if (sram_pool) - status = gen_pool_add(sram_pool, SRAM_VIRT, len, -1); + + if (sram_pool) { + addr = ioremap(phys, len); + if (!addr) + return -ENOMEM; + status = gen_pool_add_virt(sram_pool, (unsigned)addr, + phys, len, -1); + if (status < 0) + iounmap(addr); + } + WARN_ON(status < 0); return status; } diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 75da315..9847938 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -379,7 +379,7 @@ static void __init davinci_timer_init(void) timer_clk = clk_get(NULL, "timer0"); BUG_ON(IS_ERR(timer_clk)); - clk_enable(timer_clk); + clk_prepare_enable(timer_clk); /* init timer hw */ timer_init(); @@ -429,7 +429,7 @@ void davinci_watchdog_reset(struct platform_device *pdev) wd_clk = clk_get(&pdev->dev, NULL); if (WARN_ON(IS_ERR(wd_clk))) return; - clk_enable(wd_clk); + clk_prepare_enable(wd_clk); /* disable, internal clock source */ __raw_writel(0, base + TCR); diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index b37bef1..f723fe1 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -32,6 +32,7 @@ #include <linux/irq.h> #include <plat/time.h> #include <linux/platform_data/usb-ehci-orion.h> +#include <plat/irq.h> #include <plat/common.h> #include <plat/addr-map.h> #include "common.h" @@ -109,8 +110,8 @@ static void __init dove_clk_init(void) orion_clkdev_add(NULL, "orion-ehci.0", usb0); orion_clkdev_add(NULL, "orion-ehci.1", usb1); - orion_clkdev_add(NULL, "mv643xx_eth.0", ge); - orion_clkdev_add("0", "sata_mv.0", sata); + orion_clkdev_add(NULL, "mv643xx_eth_port.0", ge); + orion_clkdev_add(NULL, "sata_mv.0", sata); orion_clkdev_add("0", "pcie", pex0); orion_clkdev_add("1", "pcie", pex1); orion_clkdev_add(NULL, "sdhci-dove.0", sdio0); @@ -399,7 +400,7 @@ static void __init dove_dt_init(void) (dove_tclk + 499999) / 1000000); #ifdef CONFIG_CACHE_TAUROS2 - tauros2_init(); + tauros2_init(0); #endif dove_setup_cpu_mbus(); @@ -415,7 +416,6 @@ static void __init dove_dt_init(void) dove_ehci0_init(); dove_ehci1_init(); dove_pcie_init(1, 1); - dove_crypto_init(); of_platform_populate(NULL, of_default_bus_match_table, dove_auxdata_lookup, NULL); diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c index bb15b26..0ef4435 100644 --- a/arch/arm/mach-dove/pcie.c +++ b/arch/arm/mach-dove/pcie.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/pci.h> +#include <linux/clk.h> #include <video/vga.h> #include <asm/mach/pci.h> #include <asm/mach/arch.h> @@ -188,6 +189,10 @@ static void __init add_pcie_port(int index, void __iomem *base) if (orion_pcie_link_up(base)) { struct pcie_port *pp = &pcie_port[num_pcie_ports++]; + struct clk *clk = clk_get_sys("pcie", (index ? "1" : "0")); + + if (!IS_ERR(clk)) + clk_prepare_enable(clk); printk(KERN_INFO "link up\n"); diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 715b690..1947be8 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -47,6 +47,7 @@ #include <plat/fimc-core.h> #include <plat/iic-core.h> #include <plat/tv-core.h> +#include <plat/spi-core.h> #include <plat/regs-serial.h> #include "common.h" @@ -346,6 +347,8 @@ static void __init exynos4_map_io(void) s5p_fb_setname(0, "exynos4-fb"); s5p_hdmi_setname("exynos4-hdmi"); + + s3c64xx_spi_setname("exynos4210-spi"); } static void __init exynos5_map_io(void) @@ -366,6 +369,8 @@ static void __init exynos5_map_io(void) s3c_i2c0_setname("s3c2440-i2c"); s3c_i2c1_setname("s3c2440-i2c"); s3c_i2c2_setname("s3c2440-i2c"); + + s3c64xx_spi_setname("exynos4210-spi"); } static void __init exynos4_init_clocks(int xtal) diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index e58d786..eadf4b5 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -99,6 +99,7 @@ static char const *exynos4_dt_compat[] __initdata = { DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */ + .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = exynos4_dt_map_io, .handle_irq = gic_handle_irq, diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c index 82c27230..86e37cd 100644 --- a/arch/arm/mach-highbank/system.c +++ b/arch/arm/mach-highbank/system.c @@ -28,6 +28,7 @@ void highbank_restart(char mode, const char *cmd) hignbank_set_pwr_soft_reset(); scu_power_mode(scu_base_addr, SCU_PM_POWEROFF); - cpu_do_idle(); + while (1) + cpu_do_idle(); } diff --git a/arch/arm/mach-imx/clk-busy.c b/arch/arm/mach-imx/clk-busy.c index 1a7a8dd..1ab91b5 100644 --- a/arch/arm/mach-imx/clk-busy.c +++ b/arch/arm/mach-imx/clk-busy.c @@ -108,7 +108,7 @@ struct clk *imx_clk_busy_divider(const char *name, const char *parent_name, busy->div.hw.init = &init; clk = clk_register(NULL, &busy->div.hw); - if (!clk) + if (IS_ERR(clk)) kfree(busy); return clk; diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c index 3c1b8ff..cc49c7a 100644 --- a/arch/arm/mach-imx/clk-gate2.c +++ b/arch/arm/mach-imx/clk-gate2.c @@ -112,7 +112,7 @@ struct clk *clk_register_gate2(struct device *dev, const char *name, clk = clk_register(dev, &gate->hw); if (IS_ERR(clk)) - kfree(clk); + kfree(gate); return clk; } diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index d20d479..01e2f84 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -127,8 +127,8 @@ int __init mx25_clocks_init(void) clk[esdhc2_ipg_per] = imx_clk_gate("esdhc2_ipg_per", "per4", ccm(CCM_CGCR0), 4); clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0), 5); clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0), 6); - clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per8", ccm(CCM_CGCR0), 7); - clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "ipg_per", ccm(CCM_CGCR0), 8); + clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per7", ccm(CCM_CGCR0), 7); + clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "per8", ccm(CCM_CGCR0), 8); clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13); clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14); clk[uart_ipg_per] = imx_clk_gate("uart_ipg_per", "per15", ccm(CCM_CGCR0), 15); diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 3b6b640..366e5d5 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -109,7 +109,7 @@ int __init mx27_clocks_init(unsigned long fref) clk[per3_div] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6); clk[per4_div] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6); clk[vpu_sel] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks)); - clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 3); + clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6); clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 28, 3); clk[cpu_sel] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks)); clk[clko_sel] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks)); @@ -121,7 +121,7 @@ int __init mx27_clocks_init(unsigned long fref) clk[ssi1_sel] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks)); clk[ssi2_sel] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks)); clk[ssi1_div] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6); - clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 3); + clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6); clk[clko_en] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0); clk[ssi2_ipg_gate] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0); clk[ssi1_ipg_gate] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1); diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c index 412c583..576af74 100644 --- a/arch/arm/mach-imx/ehci-imx25.c +++ b/arch/arm/mach-imx/ehci-imx25.c @@ -30,7 +30,7 @@ #define MX25_H1_SIC_SHIFT 21 #define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT) #define MX25_H1_PP_BIT (1 << 18) -#define MX25_H1_PM_BIT (1 << 8) +#define MX25_H1_PM_BIT (1 << 16) #define MX25_H1_IPPUE_UP_BIT (1 << 7) #define MX25_H1_IPPUE_DOWN_BIT (1 << 6) #define MX25_H1_TLL_BIT (1 << 5) diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c index 779e16e..2933978 100644 --- a/arch/arm/mach-imx/ehci-imx35.c +++ b/arch/arm/mach-imx/ehci-imx35.c @@ -30,7 +30,7 @@ #define MX35_H1_SIC_SHIFT 21 #define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT) #define MX35_H1_PP_BIT (1 << 18) -#define MX35_H1_PM_BIT (1 << 8) +#define MX35_H1_PM_BIT (1 << 16) #define MX35_H1_IPPUE_UP_BIT (1 << 7) #define MX35_H1_IPPUE_DOWN_BIT (1 << 6) #define MX35_H1_TLL_BIT (1 << 5) diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 141756f..5109005 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -51,6 +51,10 @@ #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17) #define SDHC1_IRQ_GPIO IMX_GPIO_NR(2, 25) +#define VERSION_MASK 0x7 +#define MOTHERBOARD_SHIFT 4 +#define EXPBOARD_SHIFT 0 + #define MOTHERBOARD_BIT2 (GPIO_PORTD + 31) #define MOTHERBOARD_BIT1 (GPIO_PORTD + 30) #define MOTHERBOARD_BIT0 (GPIO_PORTD + 29) @@ -237,7 +241,7 @@ static struct mx2_camera_platform_data visstrim_camera = { static phys_addr_t mx2_camera_base __initdata; #define MX2_CAMERA_BUF_SIZE SZ_8M -static void __init visstrim_camera_init(void) +static void __init visstrim_analog_camera_init(void) { struct platform_device *pdev; int dma; @@ -474,6 +478,27 @@ static void __init visstrim_deinterlace_init(void) return; } +/* Emma-PrP for format conversion */ +static void __init visstrim_emmaprp_init(void) +{ + struct platform_device *pdev; + int dma; + + pdev = imx27_add_mx2_emmaprp(); + if (IS_ERR(pdev)) + return; + + /* + * Use the same memory area as the analog camera since both + * devices are, by nature, exclusive. + */ + dma = dma_declare_coherent_memory(&pdev->dev, + mx2_camera_base, mx2_camera_base, + MX2_CAMERA_BUF_SIZE, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); + if (!(dma & DMA_MEMORY_MAP)) + pr_err("Failed to declare memory for emmaprp\n"); +} /* Audio */ static const struct snd_mx27vis_platform_data snd_mx27vis_pdata __initconst = { @@ -507,13 +532,14 @@ static void __init visstrim_m10_revision(void) mo_version |= !gpio_get_value(MOTHERBOARD_BIT0); system_rev = 0x27000; - system_rev |= (mo_version << 4); - system_rev |= exp_version; + system_rev |= (mo_version << MOTHERBOARD_SHIFT); + system_rev |= (exp_version << EXPBOARD_SHIFT); } static void __init visstrim_m10_board_init(void) { int ret; + int mo_version; imx27_soc_init(); visstrim_m10_revision(); @@ -546,8 +572,24 @@ static void __init visstrim_m10_board_init(void) platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0, &iclink_tvp5150, sizeof(iclink_tvp5150)); gpio_led_register_device(0, &visstrim_m10_led_data); - visstrim_deinterlace_init(); - visstrim_camera_init(); + + /* Use mother board version to decide what video devices we shall use */ + mo_version = (system_rev >> MOTHERBOARD_SHIFT) & VERSION_MASK; + if (mo_version & 0x1) { + visstrim_emmaprp_init(); + + /* + * Despite not being used, tvp5150 must be + * powered on to avoid I2C problems. To minimize + * power consupmtion keep reset enabled. + */ + gpio_set_value(TVP5150_PWDN, 1); + ndelay(1); + gpio_set_value(TVP5150_RSTN, 0); + } else { + visstrim_deinterlace_init(); + visstrim_analog_camera_init(); + } visstrim_coda_init(); } diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 9d2c843..b5deb05 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -108,9 +108,8 @@ void __init imx3_init_l2x0(void) } l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096); - if (IS_ERR(l2x0_base)) { - printk(KERN_ERR "remapping L2 cache area failed with %ld\n", - PTR_ERR(l2x0_base)); + if (!l2x0_base) { + printk(KERN_ERR "remapping L2 cache area failed\n"); return; } diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 50bca50..d018ad4 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -130,6 +130,63 @@ config MACH_KM_KIRKWOOD_DT Say 'Y' here if you want your kernel to support the Keymile Kirkwood Reference Desgin, using Flattened Device Tree. +config MACH_INETSPACE_V2_DT + bool "LaCie Internet Space v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Internet Space v2 NAS, using Flattened Device Tree. + +config MACH_MPLCEC4_DT + bool "MPL CEC4 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + MPL CEC4 (Flattened Device Tree). + +config MACH_NETSPACE_V2_DT + bool "LaCie Network Space v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Network Space v2 NAS, using Flattened Device Tree. + +config MACH_NETSPACE_MAX_V2_DT + bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Network Space Max v2 NAS, using Flattened Device Tree. + +config MACH_NETSPACE_LITE_V2_DT + bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Network Space Lite v2 NAS, using Flattened Device Tree. + +config MACH_NETSPACE_MINI_V2_DT + bool "LaCie Network Space Mini v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Network Space Mini v2 NAS (aka SafeBox), using Flattened + Device Tree. + +config MACH_OPENBLOCKS_A6_DT + bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Plat'Home OpenBlocks A6 (Flattened Device Tree). + +config MACH_TOPKICK_DT + bool "USI Topkick (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + USI Topkick, using Flattened Device Tree + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help @@ -216,6 +273,14 @@ config MACH_T5325 Say 'Y' here if you want your kernel to support the HP t5325 Thin Client. +config MACH_NSA310_DT + bool "ZyXEL NSA-310 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + select ARM_ATAG_DTB_COMPAT + help + Say 'Y' here if you want your kernel to support the + ZyXEL NSA-310 board (Flattened Device Tree). + endmenu endif diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 294779f..8d2e5a9 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -31,3 +31,12 @@ obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o +obj-$(CONFIG_MACH_INETSPACE_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_MPLCEC4_DT) += board-mplcec4.o +obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NSA310_DT) += board-nsa310.o +obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT) += board-openblocks_a6.o +obj-$(CONFIG_MACH_TOPKICK_DT) += board-usi_topkick.o diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 70c5a28..70eb01d 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -30,6 +30,8 @@ struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL), OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0", NULL), + OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011100, "mv64xxx_i2c.1", + NULL), OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL), OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL), OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL), @@ -51,9 +53,7 @@ static void __init kirkwood_dt_init(void) kirkwood_setup_cpu_mbus(); -#ifdef CONFIG_CACHE_FEROCEON_L2 kirkwood_l2_init(); -#endif /* Setup root of clk tree */ kirkwood_clk_init(); @@ -96,6 +96,25 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("keymile,km_kirkwood")) km_kirkwood_init(); + if (of_machine_is_compatible("lacie,inetspace_v2") || + of_machine_is_compatible("lacie,netspace_v2") || + of_machine_is_compatible("lacie,netspace_max_v2") || + of_machine_is_compatible("lacie,netspace_lite_v2") || + of_machine_is_compatible("lacie,netspace_mini_v2")) + ns2_init(); + + if (of_machine_is_compatible("mpl,cec4")) + mplcec4_init(); + + if (of_machine_is_compatible("plathome,openblocks-a6")) + openblocks_a6_init(); + + if (of_machine_is_compatible("usi,topkick")) + usi_topkick_init(); + + if (of_machine_is_compatible("zyxel,nsa310")) + nsa310_init(); + of_platform_populate(NULL, kirkwood_dt_match_table, kirkwood_auxdata_lookup, NULL); } @@ -112,6 +131,15 @@ static const char *kirkwood_dt_board_compat[] = { "buffalo,lsxl", "iom,ix2-200", "keymile,km_kirkwood", + "lacie,inetspace_v2", + "lacie,netspace_max_v2", + "lacie,netspace_v2", + "lacie,netspace_lite_v2", + "lacie,netspace_mini_v2", + "mpl,cec4", + "plathome,openblocks-a6", + "usi,topkick", + "zyxel,nsa310", NULL }; diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c index 83d8975..a29b8bf 100644 --- a/arch/arm/mach-kirkwood/board-lsxl.c +++ b/arch/arm/mach-kirkwood/board-lsxl.c @@ -20,11 +20,6 @@ #include <linux/spi/spi.h> #include <linux/mv643xx_eth.h> #include <linux/gpio.h> -#include <linux/gpio-fan.h> -#include <linux/input.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/kirkwood.h> #include "common.h" #include "mpp.h" @@ -53,51 +48,6 @@ static unsigned int lsxl_mpp_config[] __initdata = { 0 }; -#define LSXL_GPIO_FAN_HIGH 18 -#define LSXL_GPIO_FAN_LOW 19 -#define LSXL_GPIO_FAN_LOCK 40 - -static struct gpio_fan_alarm lsxl_alarm = { - .gpio = LSXL_GPIO_FAN_LOCK, -}; - -static struct gpio_fan_speed lsxl_speeds[] = { - { - .rpm = 0, - .ctrl_val = 3, - }, { - .rpm = 1500, - .ctrl_val = 1, - }, { - .rpm = 3250, - .ctrl_val = 2, - }, { - .rpm = 5000, - .ctrl_val = 0, - } -}; - -static int lsxl_gpio_list[] = { - LSXL_GPIO_FAN_HIGH, LSXL_GPIO_FAN_LOW, -}; - -static struct gpio_fan_platform_data lsxl_fan_data = { - .num_ctrl = ARRAY_SIZE(lsxl_gpio_list), - .ctrl = lsxl_gpio_list, - .alarm = &lsxl_alarm, - .num_speed = ARRAY_SIZE(lsxl_speeds), - .speed = lsxl_speeds, -}; - -static struct platform_device lsxl_fan_device = { - .name = "gpio-fan", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &lsxl_fan_data, - }, -}; - /* * On the LS-XHL/LS-CHLv2, the shutdown process is following: * - Userland monitors key events until the power switch goes to off position @@ -128,7 +78,6 @@ void __init lsxl_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&lsxl_ge00_data); kirkwood_ge01_init(&lsxl_ge01_data); - platform_device_register(&lsxl_fan_device); /* register power-off method */ pm_power_off = lsxl_power_off; diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c new file mode 100644 index 0000000..e78a227 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-mplcec4.c @@ -0,0 +1,80 @@ +/* + * Copyright (C) 2012 MPL AG, Switzerland + * Stefan Peter <s.peter@mpl.ch> + * + * arch/arm/mach-kirkwood/board-mplcec4.c + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mv643xx_eth.h> +#include <linux/platform_data/mmc-mvsdio.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data mplcec4_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(1), +}; + +static struct mv643xx_eth_platform_data mplcec4_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(2), +}; + +static unsigned int mplcec4_mpp_config[] __initdata = { + MPP0_NF_IO2, + MPP1_NF_IO3, + MPP2_NF_IO4, + MPP3_NF_IO5, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP7_GPO, /* Status LED Green High Active */ + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_SD_CLK, + MPP13_SD_CMD, /* Alt UART1_TXD */ + MPP14_SD_D0, /* Alt UART1_RXD */ + MPP15_SD_D1, + MPP16_SD_D2, + MPP17_SD_D3, + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP28_GPIO, /* Input SYS_POR_DET (active High) */ + MPP29_GPIO, /* Input SYS_RTC_INT (active High) */ + MPP34_SATA1_ACTn, + MPP35_SATA0_ACTn, + MPP40_GPIO, /* LED User1 orange */ + MPP41_GPIO, /* LED User1 green */ + MPP44_GPIO, /* LED User0 orange */ + MPP45_GPIO, /* LED User0 green */ + MPP46_GPIO, /* Status LED Yellow High Active */ + MPP47_GPIO, /* SD_CD# (in/IRQ)*/ + 0 +}; + + +static struct mvsdio_platform_data mplcec4_mvsdio_data = { + .gpio_card_detect = 47, /* MPP47 used as SD card detect */ +}; + + + +void __init mplcec4_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(mplcec4_mpp_config); + kirkwood_ehci_init(); + kirkwood_ge00_init(&mplcec4_ge00_data); + kirkwood_ge01_init(&mplcec4_ge01_data); + kirkwood_sdio_init(&mplcec4_mvsdio_data); + kirkwood_pcie_init(KW_PCIE0); +} + + + diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c new file mode 100644 index 0000000..78596c4 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-ns2.c @@ -0,0 +1,87 @@ +/* + * Copyright 2012 (C), Simon Guinot <simon.guinot@sequanux.org> + * + * arch/arm/mach-kirkwood/board-ns2.c + * + * LaCie Network Space v2 board (and parents) initialization for drivers + * not converted to flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mv643xx_eth.h> +#include <linux/gpio.h> +#include <linux/of.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data ns2_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static unsigned int ns2_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP7_GPO, /* Fan speed (bit 1) */ + MPP8_TW0_SDA, + MPP9_TW0_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_GPO, /* Red led */ + MPP14_GPIO, /* USB fuse */ + MPP16_GPIO, /* SATA 0 power */ + MPP17_GPIO, /* SATA 1 power */ + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_SATA1_ACTn, + MPP21_SATA0_ACTn, + MPP22_GPIO, /* Fan speed (bit 0) */ + MPP23_GPIO, /* Fan power */ + MPP24_GPIO, /* USB mode select */ + MPP25_GPIO, /* Fan rotation fail */ + MPP26_GPIO, /* USB device vbus */ + MPP28_GPIO, /* USB enable host vbus */ + MPP29_GPIO, /* Blue led (slow register) */ + MPP30_GPIO, /* Blue led (command register) */ + MPP31_GPIO, /* Board power off */ + MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ + MPP33_GPO, /* Fan speed (bit 2) */ + 0 +}; + +#define NS2_GPIO_POWER_OFF 31 + +static void ns2_power_off(void) +{ + gpio_set_value(NS2_GPIO_POWER_OFF, 1); +} + +void __init ns2_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(ns2_mpp_config); + + kirkwood_ehci_init(); + if (of_machine_is_compatible("lacie,netspace_lite_v2") || + of_machine_is_compatible("lacie,netspace_mini_v2")) + ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); + kirkwood_ge00_init(&ns2_ge00_data); + + if (gpio_request(NS2_GPIO_POWER_OFF, "power-off") == 0 && + gpio_direction_output(NS2_GPIO_POWER_OFF, 0) == 0) + pm_power_off = ns2_power_off; + else + pr_err("ns2: failed to configure power-off GPIO\n"); +} diff --git a/arch/arm/mach-kirkwood/board-nsa310.c b/arch/arm/mach-kirkwood/board-nsa310.c new file mode 100644 index 0000000..027ce83 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-nsa310.c @@ -0,0 +1,105 @@ +/* + * arch/arm/mach-kirkwood/nsa-310-setup.c + * + * ZyXEL NSA-310 Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/kirkwood.h> +#include "common.h" +#include "mpp.h" + +#define NSA310_GPIO_USB_POWER_OFF 21 +#define NSA310_GPIO_POWER_OFF 48 + +static unsigned int nsa310_mpp_config[] __initdata = { + MPP12_GPIO, /* led esata green */ + MPP13_GPIO, /* led esata red */ + MPP15_GPIO, /* led usb green */ + MPP16_GPIO, /* led usb red */ + MPP21_GPIO, /* control usb power off */ + MPP28_GPIO, /* led sys green */ + MPP29_GPIO, /* led sys red */ + MPP36_GPIO, /* key reset */ + MPP37_GPIO, /* key copy */ + MPP39_GPIO, /* led copy green */ + MPP40_GPIO, /* led copy red */ + MPP41_GPIO, /* led hdd green */ + MPP42_GPIO, /* led hdd red */ + MPP44_GPIO, /* ?? */ + MPP46_GPIO, /* key power */ + MPP48_GPIO, /* control power off */ + 0 +}; + +static struct i2c_board_info __initdata nsa310_i2c_info[] = { + { I2C_BOARD_INFO("adt7476", 0x2e) }, +}; + +static void nsa310_power_off(void) +{ + gpio_set_value(NSA310_GPIO_POWER_OFF, 1); +} + +static int __init nsa310_gpio_request(unsigned int gpio, unsigned long flags, + const char *label) +{ + int err; + + err = gpio_request_one(gpio, flags, label); + if (err) + pr_err("NSA-310: can't setup GPIO%u (%s), err=%d\n", + gpio, label, err); + + return err; +} + +static void __init nsa310_gpio_init(void) +{ + int err; + + err = nsa310_gpio_request(NSA310_GPIO_POWER_OFF, GPIOF_OUT_INIT_LOW, + "Power Off"); + if (!err) + pm_power_off = nsa310_power_off; + + nsa310_gpio_request(NSA310_GPIO_USB_POWER_OFF, GPIOF_OUT_INIT_LOW, + "USB Power Off"); +} + +void __init nsa310_init(void) +{ + u32 dev, rev; + + kirkwood_mpp_conf(nsa310_mpp_config); + + nsa310_gpio_init(); + + /* this can be removed once the mainline kirkwood.dtsi gets + * the ehci configuration by default */ + kirkwood_ehci_init(); + + kirkwood_pcie_id(&dev, &rev); + + i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info)); +} + +static int __init nsa310_pci_init(void) +{ + if (of_machine_is_compatible("zyxel,nsa310")) + kirkwood_pcie_init(KW_PCIE0); + + return 0; +} + +subsys_initcall(nsa310_pci_init); diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c b/arch/arm/mach-kirkwood/board-openblocks_a6.c new file mode 100644 index 0000000..e807e8c --- /dev/null +++ b/arch/arm/mach-kirkwood/board-openblocks_a6.c @@ -0,0 +1,71 @@ +/* + * Copyright 2012 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * arch/arm/mach-kirkwood/board-openblocks_a6.c + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mv643xx_eth.h> +#include <linux/clk.h> +#include <linux/clk-private.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data openblocks_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static unsigned int openblocks_a6_mpp_config[] __initdata = { + MPP0_NF_IO2, + MPP1_NF_IO3, + MPP2_NF_IO4, + MPP3_NF_IO5, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP8_UART1_RTS, + MPP9_UART1_CTS, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP13_UART1_TXD, + MPP14_UART1_RXD, + MPP15_UART0_RTS, + MPP16_UART0_CTS, + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_GPIO, /* DIP SW0 */ + MPP21_GPIO, /* DIP SW1 */ + MPP22_GPIO, /* DIP SW2 */ + MPP23_GPIO, /* DIP SW3 */ + MPP24_GPIO, /* GPIO 0 */ + MPP25_GPIO, /* GPIO 1 */ + MPP26_GPIO, /* GPIO 2 */ + MPP27_GPIO, /* GPIO 3 */ + MPP28_GPIO, /* GPIO 4 */ + MPP29_GPIO, /* GPIO 5 */ + MPP30_GPIO, /* GPIO 6 */ + MPP31_GPIO, /* GPIO 7 */ + MPP36_TW1_SDA, + MPP37_TW1_SCK, + MPP38_GPIO, /* INIT */ + MPP39_GPIO, /* USB OC */ + MPP41_GPIO, /* LED: Red */ + MPP42_GPIO, /* LED: Yellow */ + MPP43_GPIO, /* LED: Green */ + 0, +}; + +void __init openblocks_a6_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(openblocks_a6_mpp_config); + kirkwood_ehci_init(); + kirkwood_ge00_init(&openblocks_ge00_data); +} diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c new file mode 100644 index 0000000..e2ec9d8 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-usi_topkick.c @@ -0,0 +1,82 @@ +/* + * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net> + * + * arch/arm/mach-kirkwood/board-usi_topkick.c + * + * USI Topkick Init for drivers not converted to flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mv643xx_eth.h> +#include <linux/gpio.h> +#include <linux/platform_data/mmc-mvsdio.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data topkick_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mvsdio_platform_data topkick_mvsdio_data = { + /* unfortunately the CD signal has not been connected */ +}; + +/* + * GPIO LED layout + * + * /-SYS_LED(2) + * | + * | /-DISK_LED + * | | + * | | /-WLAN_LED(2) + * | | | + * [SW] [*] [*] [*] + */ + +/* + * Switch positions + * + * /-SW_LEFT + * | + * | /-SW_IDLE + * | | + * | | /-SW_RIGHT + * | | | + * PS [L] [I] [R] LEDS + */ + +static unsigned int topkick_mpp_config[] __initdata = { + MPP21_GPIO, /* DISK_LED (low active) - yellow */ + MPP36_GPIO, /* SATA0 power enable (high active) */ + MPP37_GPIO, /* SYS_LED2 (low active) - red */ + MPP38_GPIO, /* SYS_LED (low active) - blue */ + MPP39_GPIO, /* WLAN_LED (low active) - green */ + MPP43_GPIO, /* SW_LEFT (low active) */ + MPP44_GPIO, /* SW_RIGHT (low active) */ + MPP45_GPIO, /* SW_IDLE (low active) */ + MPP46_GPIO, /* SW_LEFT (low active) */ + MPP48_GPIO, /* WLAN_LED2 (low active) - yellow */ + 0 +}; + +#define TOPKICK_SATA0_PWR_ENABLE 36 + +void __init usi_topkick_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(topkick_mpp_config); + + /* SATA0 power enable */ + gpio_set_value(TOPKICK_SATA0_PWR_ENABLE, 1); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&topkick_ge00_data); + kirkwood_sdio_init(&topkick_mvsdio_data); +} diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 3991077..906c22e 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -266,6 +266,7 @@ void __init kirkwood_clk_init(void) orion_clkdev_add("1", "pcie", pex1); orion_clkdev_add(NULL, "kirkwood-i2s", audio); orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", runit); + orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".1", runit); /* Marvell says runit is used by SPI, UART, NAND, TWSI, ..., * so should never be gated. @@ -633,6 +634,7 @@ char * __init kirkwood_id(void) void __init kirkwood_l2_init(void) { +#ifdef CONFIG_CACHE_FEROCEON_L2 #ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG); feroceon_l2_init(1); @@ -640,6 +642,7 @@ void __init kirkwood_l2_init(void) writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG); feroceon_l2_init(0); #endif +#endif } void __init kirkwood_init(void) @@ -657,9 +660,7 @@ void __init kirkwood_init(void) kirkwood_setup_cpu_mbus(); -#ifdef CONFIG_CACHE_FEROCEON_L2 kirkwood_l2_init(); -#endif /* Setup root of clk tree */ kirkwood_clk_init(); diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index bcffd7c..3e079d1 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -112,6 +112,40 @@ void km_kirkwood_init(void); static inline void km_kirkwood_init(void) {}; #endif +#ifdef CONFIG_MACH_MPLCEC4_DT +void mplcec4_init(void); +#else +static inline void mplcec4_init(void) {}; +#endif + +#if defined(CONFIG_MACH_INETSPACE_V2_DT) || \ + defined(CONFIG_MACH_NETSPACE_V2_DT) || \ + defined(CONFIG_MACH_NETSPACE_MAX_V2_DT) || \ + defined(CONFIG_MACH_NETSPACE_LITE_V2_DT) || \ + defined(CONFIG_MACH_NETSPACE_MINI_V2_DT) +void ns2_init(void); +#else +static inline void ns2_init(void) {}; +#endif + +#ifdef CONFIG_MACH_NSA310_DT +void nsa310_init(void); +#else +static inline void nsa310_init(void) {}; +#endif + +#ifdef CONFIG_MACH_OPENBLOCKS_A6_DT +void openblocks_a6_init(void); +#else +static inline void openblocks_a6_init(void) {}; +#endif + +#ifdef CONFIG_MACH_TOPKICK_DT +void usi_topkick_init(void); +#else +static inline void usi_topkick_init(void) {}; +#endif + /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 178d4da..ebdda83 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -89,6 +89,8 @@ config MACH_MMP_DT select CPU_PXA168 select CPU_PXA910 select USE_OF + select PINCTRL + select PINCTRL_SINGLE help Include support for Marvell MMP2 based platforms using the device tree. Needn't select any other machine while @@ -99,6 +101,8 @@ config MACH_MMP2_DT depends on !CPU_MOHAWK select CPU_MMP2 select USE_OF + select PINCTRL + select PINCTRL_SINGLE help Include support for Marvell MMP2 based platforms using the device tree. diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 9518bf5..e255164f 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -444,16 +444,28 @@ static struct omap1_cam_platform_data ams_delta_camera_platform_data = { .lclk_khz_max = 1334, /* results in 5fps CIF, 10fps QCIF */ }; +static struct platform_device ams_delta_audio_device = { + .name = "ams-delta-audio", + .id = -1, +}; + +static struct platform_device cx20442_codec_device = { + .name = "cx20442-codec", + .id = -1, +}; + static struct platform_device *ams_delta_devices[] __initdata = { &latch1_gpio_device, &latch2_gpio_device, &ams_delta_kp_device, &ams_delta_camera_device, + &ams_delta_audio_device, }; static struct platform_device *late_devices[] __initdata = { &ams_delta_nand_device, &ams_delta_lcd_device, + &cx20442_codec_device, }; static void __init ams_delta_init(void) diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 4b6de70..756872e 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -307,8 +307,7 @@ static void __init omap_fsample_init(void) fsample_init_smc91x(); - if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0) - BUG(); + BUG_ON(gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0); gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 376f7f2..9d533ee 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -411,8 +411,7 @@ static void __init h2_init(void) h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS; h2_nand_resource.end += SZ_4K - 1; - if (gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0) - BUG(); + BUG_ON(gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0); gpio_direction_input(H2_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index ededdb7..be60862 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -406,8 +406,7 @@ static void __init h3_init(void) nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS; nand_resource.end += SZ_4K - 1; - if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0) - BUG(); + BUG_ON(gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0); gpio_direction_input(H3_NAND_RB_GPIO_PIN); /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */ diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 198b054..327ffcf 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -275,8 +275,7 @@ static void __init omap_perseus2_init(void) perseus2_init_smc91x(); - if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) - BUG(); + BUG_ON(gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0); gpio_direction_input(P2_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 2a1a898..2265e58 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -11,7 +11,6 @@ config ARCH_OMAP2PLUS_TYPICAL select I2C_OMAP select MENELAUS if ARCH_OMAP2 select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 - select PINCTRL select PM_RUNTIME select REGULATOR select SERIAL_OMAP @@ -271,14 +270,14 @@ config MACH_NOKIA_N8X0 select OMAP_PACKAGE_ZAC config MACH_NOKIA_RM680 - bool "Nokia RM-680/696 board" + bool "Nokia N950 (RM-680) / N9 (RM-696) phones" depends on ARCH_OMAP3 default y select MACH_NOKIA_RM696 select OMAP_PACKAGE_CBB config MACH_NOKIA_RX51 - bool "Nokia RX-51 board" + bool "Nokia N900 (RX-51) phone" depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index fe40d9e..fb38a9b 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -279,4 +279,4 @@ endif emac-$(CONFIG_TI_DAVINCI_EMAC) := am35xx-emac.o obj-y += $(emac-m) $(emac-y) -obj-y += common-board-devices.o twl-common.o +obj-y += common-board-devices.o twl-common.o dss-common.o diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 3669c12..8ce98ae 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -37,9 +37,6 @@ #include <plat/usb.h> #include <plat/mmc.h> #include "omap4-keypad.h" -#include <video/omapdss.h> -#include <video/omap-panel-nokia-dsi.h> -#include <video/omap-panel-picodlp.h> #include <linux/wl12xx.h> #include <linux/platform_data/omap-abe-twl6040.h> @@ -48,17 +45,13 @@ #include "hsmmc.h" #include "control.h" #include "common-board-devices.h" +#include "dss-common.h" #define ETH_KS8851_IRQ 34 #define ETH_KS8851_POWER_ON 48 #define ETH_KS8851_QUART 138 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184 #define OMAP4_SFH7741_ENABLE_GPIO 188 -#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ -#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ -#define HDMI_GPIO_HPD 63 /* Hotplug detect */ -#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ -#define DLP_POWER_ON_GPIO 40 #define GPIO_WIFI_PMENA 54 #define GPIO_WIFI_IRQ 53 @@ -607,154 +600,6 @@ static void __init omap_sfh7741prox_init(void) __func__, OMAP4_SFH7741_ENABLE_GPIO, error); } -static struct nokia_dsi_panel_data dsi1_panel = { - .name = "taal", - .reset_gpio = 102, - .use_ext_te = false, - .ext_te_gpio = 101, - .esd_interval = 0, - .pin_config = { - .num_pins = 6, - .pins = { 0, 1, 2, 3, 4, 5 }, - }, -}; - -static struct omap_dss_device sdp4430_lcd_device = { - .name = "lcd", - .driver_name = "taal", - .type = OMAP_DISPLAY_TYPE_DSI, - .data = &dsi1_panel, - .phy.dsi = { - .module = 0, - }, - .channel = OMAP_DSS_CHANNEL_LCD, -}; - -static struct nokia_dsi_panel_data dsi2_panel = { - .name = "taal", - .reset_gpio = 104, - .use_ext_te = false, - .ext_te_gpio = 103, - .esd_interval = 0, - .pin_config = { - .num_pins = 6, - .pins = { 0, 1, 2, 3, 4, 5 }, - }, -}; - -static struct omap_dss_device sdp4430_lcd2_device = { - .name = "lcd2", - .driver_name = "taal", - .type = OMAP_DISPLAY_TYPE_DSI, - .data = &dsi2_panel, - .phy.dsi = { - - .module = 1, - }, - .channel = OMAP_DSS_CHANNEL_LCD2, -}; - -static struct omap_dss_hdmi_data sdp4430_hdmi_data = { - .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, - .ls_oe_gpio = HDMI_GPIO_LS_OE, - .hpd_gpio = HDMI_GPIO_HPD, -}; - -static struct omap_dss_device sdp4430_hdmi_device = { - .name = "hdmi", - .driver_name = "hdmi_panel", - .type = OMAP_DISPLAY_TYPE_HDMI, - .channel = OMAP_DSS_CHANNEL_DIGIT, - .data = &sdp4430_hdmi_data, -}; - -static struct picodlp_panel_data sdp4430_picodlp_pdata = { - .picodlp_adapter_id = 2, - .emu_done_gpio = 44, - .pwrgood_gpio = 45, -}; - -static void sdp4430_picodlp_init(void) -{ - int r; - const struct gpio picodlp_gpios[] = { - {DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, - "DLP POWER ON"}, - {sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN, - "DLP EMU DONE"}, - {sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW, - "DLP PWRGOOD"}, - }; - - r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios)); - if (r) - pr_err("Cannot request PicoDLP GPIOs, error %d\n", r); -} - -static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev) -{ - gpio_set_value(DISPLAY_SEL_GPIO, 0); - gpio_set_value(DLP_POWER_ON_GPIO, 1); - - return 0; -} - -static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev) -{ - gpio_set_value(DLP_POWER_ON_GPIO, 0); - gpio_set_value(DISPLAY_SEL_GPIO, 1); -} - -static struct omap_dss_device sdp4430_picodlp_device = { - .name = "picodlp", - .driver_name = "picodlp_panel", - .type = OMAP_DISPLAY_TYPE_DPI, - .phy.dpi.data_lines = 24, - .channel = OMAP_DSS_CHANNEL_LCD2, - .platform_enable = sdp4430_panel_enable_picodlp, - .platform_disable = sdp4430_panel_disable_picodlp, - .data = &sdp4430_picodlp_pdata, -}; - -static struct omap_dss_device *sdp4430_dss_devices[] = { - &sdp4430_lcd_device, - &sdp4430_lcd2_device, - &sdp4430_hdmi_device, - &sdp4430_picodlp_device, -}; - -static struct omap_dss_board_info sdp4430_dss_data = { - .num_devices = ARRAY_SIZE(sdp4430_dss_devices), - .devices = sdp4430_dss_devices, - .default_device = &sdp4430_lcd_device, -}; - -static void __init omap_4430sdp_display_init(void) -{ - int r; - - /* Enable LCD2 by default (instead of Pico DLP) */ - r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, - "display_sel"); - if (r) - pr_err("%s: Could not get display_sel GPIO\n", __func__); - - sdp4430_picodlp_init(); - omap_display_init(&sdp4430_dss_data); - /* - * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and - * later have external pull up on the HDMI I2C lines - */ - if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) - omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); - else - omap_hdmi_init(0); - - omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); -} - #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 601ecdf..8f5f21c 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -21,6 +21,7 @@ #include "common.h" #include "common-board-devices.h" +#include "dss-common.h" #if !(defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)) #define intc_of_init NULL @@ -40,6 +41,15 @@ static void __init omap_generic_init(void) omap_sdrc_init(NULL, NULL); of_platform_populate(NULL, omap_dt_match_table, NULL, NULL); + + /* + * HACK: call display setup code for selected boards to enable omapdss. + * This will be removed when omapdss supports DT. + */ + if (of_machine_is_compatible("ti,omap4-panda")) + omap4_panda_display_init_of(); + else if (of_machine_is_compatible("ti,omap4-sdp")) + omap_4430sdp_display_init_of(); } #ifdef CONFIG_SOC_OMAP2420 diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 388c431..d41ab98 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -24,6 +24,7 @@ #include <linux/input.h> #include <linux/gpio_keys.h> #include <linux/opp.h> +#include <linux/cpu.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -444,27 +445,31 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static void __init beagle_opp_init(void) +static int __init beagle_opp_init(void) { int r = 0; - /* Initialize the omap3 opp table */ - if (omap3_opp_init()) { + if (!machine_is_omap3_beagle()) + return 0; + + /* Initialize the omap3 opp table if not already created. */ + r = omap3_opp_init(); + if (IS_ERR_VALUE(r) && (r != -EEXIST)) { pr_err("%s: opp default init failed\n", __func__); - return; + return r; } /* Custom OPP enabled for all xM versions */ if (cpu_is_omap3630()) { struct device *mpu_dev, *iva_dev; - mpu_dev = omap_device_get_by_hwmod_name("mpu"); + mpu_dev = get_cpu_device(0); iva_dev = omap_device_get_by_hwmod_name("iva"); if (IS_ERR(mpu_dev) || IS_ERR(iva_dev)) { pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n", __func__, mpu_dev, iva_dev); - return; + return -ENODEV; } /* Enable MPU 1GHz and lower opps */ r = opp_enable(mpu_dev, 800000000); @@ -484,8 +489,9 @@ static void __init beagle_opp_init(void) opp_disable(iva_dev, 660000000); } } - return; + return 0; } +device_initcall(beagle_opp_init); static void __init omap3_beagle_init(void) { @@ -522,8 +528,6 @@ static void __init omap3_beagle_init(void) /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); - - beagle_opp_init(); } MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index bfcd397..ab505a2 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -36,26 +36,22 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <video/omapdss.h> #include "common.h" #include <plat/usb.h> #include <plat/mmc.h> -#include <video/omap-panel-tfp410.h> #include "soc.h" #include "hsmmc.h" #include "control.h" #include "mux.h" #include "common-board-devices.h" +#include "dss-common.h" #define GPIO_HUB_POWER 1 #define GPIO_HUB_NRESET 62 #define GPIO_WIFI_PMENA 43 #define GPIO_WIFI_IRQ 53 -#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ -#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ -#define HDMI_GPIO_HPD 63 /* Hotplug detect */ /* wl127x BT, FM, GPS connectivity chip */ static struct ti_st_plat_data wilink_platform_data = { @@ -409,68 +405,6 @@ static struct omap_board_mux board_mux[] __initdata = { #define board_mux NULL #endif -/* Display DVI */ -#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0 - -/* Using generic display panel */ -static struct tfp410_platform_data omap4_dvi_panel = { - .i2c_bus_num = 3, - .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, -}; - -static struct omap_dss_device omap4_panda_dvi_device = { - .type = OMAP_DISPLAY_TYPE_DPI, - .name = "dvi", - .driver_name = "tfp410", - .data = &omap4_dvi_panel, - .phy.dpi.data_lines = 24, - .reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, - .channel = OMAP_DSS_CHANNEL_LCD2, -}; - -static struct omap_dss_hdmi_data omap4_panda_hdmi_data = { - .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, - .ls_oe_gpio = HDMI_GPIO_LS_OE, - .hpd_gpio = HDMI_GPIO_HPD, -}; - -static struct omap_dss_device omap4_panda_hdmi_device = { - .name = "hdmi", - .driver_name = "hdmi_panel", - .type = OMAP_DISPLAY_TYPE_HDMI, - .channel = OMAP_DSS_CHANNEL_DIGIT, - .data = &omap4_panda_hdmi_data, -}; - -static struct omap_dss_device *omap4_panda_dss_devices[] = { - &omap4_panda_dvi_device, - &omap4_panda_hdmi_device, -}; - -static struct omap_dss_board_info omap4_panda_dss_data = { - .num_devices = ARRAY_SIZE(omap4_panda_dss_devices), - .devices = omap4_panda_dss_devices, - .default_device = &omap4_panda_dvi_device, -}; - -static void __init omap4_panda_display_init(void) -{ - - omap_display_init(&omap4_panda_dss_data); - - /* - * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and - * later have external pull up on the HDMI I2C lines - */ - if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) - omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); - else - omap_hdmi_init(0); - - omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); -} static void omap4_panda_init_rev(void) { diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 45997bf..42ac9d3 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -1,5 +1,5 @@ /* - * Board support file for Nokia RM-680/696. + * Board support file for Nokia N950 (RM-680) / N9 (RM-696). * * Copyright (C) 2010 Nokia * diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 7bbb05d..e5af119 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-omap2/board-rx51.c + * Board support file for Nokia N900 (aka RX-51). * * Copyright (C) 2007, 2008 Nokia * diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c index 114ab4b..1a45d6b 100644 --- a/arch/arm/mach-omap2/clock33xx_data.c +++ b/arch/arm/mach-omap2/clock33xx_data.c @@ -1073,6 +1073,8 @@ static struct omap_clk am33xx_clks[] = { CLK(NULL, "gfx_fck_div_ck", &gfx_fck_div_ck, CK_AM33XX), CLK(NULL, "sysclkout_pre_ck", &sysclkout_pre_ck, CK_AM33XX), CLK(NULL, "clkout2_ck", &clkout2_ck, CK_AM33XX), + CLK(NULL, "timer_32k_ck", &clkdiv32k_ick, CK_AM33XX), + CLK(NULL, "timer_sys_ck", &sys_clkin_ck, CK_AM33XX), }; int __init am33xx_clk_init(void) diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index d661d13..6efc30c 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -3294,7 +3294,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "auxclk5_src_ck", &auxclk5_src_ck, CK_443X), CLK(NULL, "auxclk5_ck", &auxclk5_ck, CK_443X), CLK(NULL, "auxclkreq5_ck", &auxclkreq5_ck, CK_443X), - CLK(NULL, "gpmc_ck", &dummy_ck, CK_443X), + CLK("omap-gpmc", "fck", &dummy_ck, CK_443X), CLK("omap_i2c.1", "ick", &dummy_ck, CK_443X), CLK("omap_i2c.2", "ick", &dummy_ck, CK_443X), CLK("omap_i2c.3", "ick", &dummy_ck, CK_443X), diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index cbb8791..512e79a 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -925,15 +925,18 @@ static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm) if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_enable) return -EINVAL; + spin_lock_irqsave(&clkdm->lock, flags); + /* * For arch's with no autodeps, clkcm_clk_enable * should be called for every clock instance or hwmod that is * enabled, so the clkdm can be force woken up. */ - if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps) + if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps) { + spin_unlock_irqrestore(&clkdm->lock, flags); return 0; + } - spin_lock_irqsave(&clkdm->lock, flags); arch_clkdm->clkdm_clk_enable(clkdm); pwrdm_state_switch(clkdm->pwrdm.ptr); spin_unlock_irqrestore(&clkdm->lock, flags); @@ -950,15 +953,19 @@ static int _clkdm_clk_hwmod_disable(struct clockdomain *clkdm) if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_disable) return -EINVAL; + spin_lock_irqsave(&clkdm->lock, flags); + if (atomic_read(&clkdm->usecount) == 0) { + spin_unlock_irqrestore(&clkdm->lock, flags); WARN_ON(1); /* underflow */ return -ERANGE; } - if (atomic_dec_return(&clkdm->usecount) > 0) + if (atomic_dec_return(&clkdm->usecount) > 0) { + spin_unlock_irqrestore(&clkdm->lock, flags); return 0; + } - spin_lock_irqsave(&clkdm->lock, flags); arch_clkdm->clkdm_clk_disable(clkdm); pwrdm_state_switch(clkdm->pwrdm.ptr); spin_unlock_irqrestore(&clkdm->lock, flags); diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index b56d06b..95192a06 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -359,7 +359,7 @@ static struct clockdomain iss_44xx_clkdm = { .clkdm_offs = OMAP4430_CM2_CAM_CAM_CDOFFS, .wkdep_srcs = iss_wkup_sleep_deps, .sleepdep_srcs = iss_wkup_sleep_deps, - .flags = CLKDM_CAN_HWSUP_SWSUP, + .flags = CLKDM_CAN_SWSUP, }; static struct clockdomain l3_dss_44xx_clkdm = { diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index c8c2117..c72b5a7 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -19,6 +19,7 @@ #include <linux/of.h> #include <linux/pinctrl/machine.h> #include <linux/platform_data/omap4-keypad.h> +#include <linux/platform_data/omap_ocp2scp.h> #include <asm/mach-types.h> #include <asm/mach/map.h> @@ -341,7 +342,7 @@ static void __init omap_init_dmic(void) oh = omap_hwmod_lookup("dmic"); if (!oh) { - printk(KERN_ERR "Could not look up mcpdm hw_mod\n"); + pr_err("Could not look up dmic hw_mod\n"); return; } @@ -613,6 +614,83 @@ static void omap_init_vout(void) static inline void omap_init_vout(void) {} #endif +#if defined(CONFIG_OMAP_OCP2SCP) || defined(CONFIG_OMAP_OCP2SCP_MODULE) +static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev) +{ + int cnt = 0; + + while (ocp2scp_dev->drv_name != NULL) { + cnt++; + ocp2scp_dev++; + } + + return cnt; +} + +static void omap_init_ocp2scp(void) +{ + struct omap_hwmod *oh; + struct platform_device *pdev; + int bus_id = -1, dev_cnt = 0, i; + struct omap_ocp2scp_dev *ocp2scp_dev; + const char *oh_name, *name; + struct omap_ocp2scp_platform_data *pdata; + + if (!cpu_is_omap44xx()) + return; + + oh_name = "ocp2scp_usb_phy"; + name = "omap-ocp2scp"; + + oh = omap_hwmod_lookup(oh_name); + if (!oh) { + pr_err("%s: could not find omap_hwmod for %s\n", __func__, + oh_name); + return; + } + + pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + pr_err("%s: No memory for ocp2scp pdata\n", __func__); + return; + } + + ocp2scp_dev = oh->dev_attr; + dev_cnt = count_ocp2scp_devices(ocp2scp_dev); + + if (!dev_cnt) { + pr_err("%s: No devices connected to ocp2scp\n", __func__); + kfree(pdata); + return; + } + + pdata->devices = kzalloc(sizeof(struct omap_ocp2scp_dev *) + * dev_cnt, GFP_KERNEL); + if (!pdata->devices) { + pr_err("%s: No memory for ocp2scp pdata devices\n", __func__); + kfree(pdata); + return; + } + + for (i = 0; i < dev_cnt; i++, ocp2scp_dev++) + pdata->devices[i] = ocp2scp_dev; + + pdata->dev_cnt = dev_cnt; + + pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(*pdata), NULL, + 0, false); + if (IS_ERR(pdev)) { + pr_err("Could not build omap_device for %s %s\n", + name, oh_name); + kfree(pdata->devices); + kfree(pdata); + return; + } +} +#else +static inline void omap_init_ocp2scp(void) { } +#endif + /*-------------------------------------------------------------------------*/ static int __init omap2_init_devices(void) @@ -640,6 +718,7 @@ static int __init omap2_init_devices(void) omap_init_sham(); omap_init_aes(); omap_init_vout(); + omap_init_ocp2scp(); return 0; } diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c new file mode 100644 index 0000000..679a047 --- /dev/null +++ b/arch/arm/mach-omap2/dss-common.c @@ -0,0 +1,276 @@ +/* + * Copyright (C) 2012 Texas Instruments, Inc.. + * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +/* + * NOTE: this is a transitional file to help with DT adaptation. + * This file will be removed when DSS supports DT. + */ + +#include <linux/kernel.h> +#include <linux/gpio.h> + +#include <video/omapdss.h> +#include <video/omap-panel-tfp410.h> +#include <video/omap-panel-nokia-dsi.h> +#include <video/omap-panel-picodlp.h> + +#include <plat/cpu.h> + +#include "dss-common.h" +#include "mux.h" + +#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ +#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define HDMI_GPIO_HPD 63 /* Hotplug detect */ + +/* Display DVI */ +#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0 + +/* Using generic display panel */ +static struct tfp410_platform_data omap4_dvi_panel = { + .i2c_bus_num = 3, + .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, +}; + +static struct omap_dss_device omap4_panda_dvi_device = { + .type = OMAP_DISPLAY_TYPE_DPI, + .name = "dvi", + .driver_name = "tfp410", + .data = &omap4_dvi_panel, + .phy.dpi.data_lines = 24, + .reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, + .channel = OMAP_DSS_CHANNEL_LCD2, +}; + +static struct omap_dss_hdmi_data omap4_panda_hdmi_data = { + .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, + .ls_oe_gpio = HDMI_GPIO_LS_OE, + .hpd_gpio = HDMI_GPIO_HPD, +}; + +static struct omap_dss_device omap4_panda_hdmi_device = { + .name = "hdmi", + .driver_name = "hdmi_panel", + .type = OMAP_DISPLAY_TYPE_HDMI, + .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &omap4_panda_hdmi_data, +}; + +static struct omap_dss_device *omap4_panda_dss_devices[] = { + &omap4_panda_dvi_device, + &omap4_panda_hdmi_device, +}; + +static struct omap_dss_board_info omap4_panda_dss_data = { + .num_devices = ARRAY_SIZE(omap4_panda_dss_devices), + .devices = omap4_panda_dss_devices, + .default_device = &omap4_panda_dvi_device, +}; + +void __init omap4_panda_display_init(void) +{ + omap_display_init(&omap4_panda_dss_data); + + /* + * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and + * later have external pull up on the HDMI I2C lines + */ + if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) + omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); + else + omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); +} + +void __init omap4_panda_display_init_of(void) +{ + omap_display_init(&omap4_panda_dss_data); +} + + +/* OMAP4 Blaze display data */ + +#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ +#define DLP_POWER_ON_GPIO 40 + +static struct nokia_dsi_panel_data dsi1_panel = { + .name = "taal", + .reset_gpio = 102, + .use_ext_te = false, + .ext_te_gpio = 101, + .esd_interval = 0, + .pin_config = { + .num_pins = 6, + .pins = { 0, 1, 2, 3, 4, 5 }, + }, +}; + +static struct omap_dss_device sdp4430_lcd_device = { + .name = "lcd", + .driver_name = "taal", + .type = OMAP_DISPLAY_TYPE_DSI, + .data = &dsi1_panel, + .phy.dsi = { + .module = 0, + }, + .channel = OMAP_DSS_CHANNEL_LCD, +}; + +static struct nokia_dsi_panel_data dsi2_panel = { + .name = "taal", + .reset_gpio = 104, + .use_ext_te = false, + .ext_te_gpio = 103, + .esd_interval = 0, + .pin_config = { + .num_pins = 6, + .pins = { 0, 1, 2, 3, 4, 5 }, + }, +}; + +static struct omap_dss_device sdp4430_lcd2_device = { + .name = "lcd2", + .driver_name = "taal", + .type = OMAP_DISPLAY_TYPE_DSI, + .data = &dsi2_panel, + .phy.dsi = { + + .module = 1, + }, + .channel = OMAP_DSS_CHANNEL_LCD2, +}; + +static struct omap_dss_hdmi_data sdp4430_hdmi_data = { + .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, + .ls_oe_gpio = HDMI_GPIO_LS_OE, + .hpd_gpio = HDMI_GPIO_HPD, +}; + +static struct omap_dss_device sdp4430_hdmi_device = { + .name = "hdmi", + .driver_name = "hdmi_panel", + .type = OMAP_DISPLAY_TYPE_HDMI, + .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &sdp4430_hdmi_data, +}; + +static struct picodlp_panel_data sdp4430_picodlp_pdata = { + .picodlp_adapter_id = 2, + .emu_done_gpio = 44, + .pwrgood_gpio = 45, +}; + +static void sdp4430_picodlp_init(void) +{ + int r; + const struct gpio picodlp_gpios[] = { + {DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, + "DLP POWER ON"}, + {sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN, + "DLP EMU DONE"}, + {sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW, + "DLP PWRGOOD"}, + }; + + r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios)); + if (r) + pr_err("Cannot request PicoDLP GPIOs, error %d\n", r); +} + +static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev) +{ + gpio_set_value(DISPLAY_SEL_GPIO, 0); + gpio_set_value(DLP_POWER_ON_GPIO, 1); + + return 0; +} + +static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev) +{ + gpio_set_value(DLP_POWER_ON_GPIO, 0); + gpio_set_value(DISPLAY_SEL_GPIO, 1); +} + +static struct omap_dss_device sdp4430_picodlp_device = { + .name = "picodlp", + .driver_name = "picodlp_panel", + .type = OMAP_DISPLAY_TYPE_DPI, + .phy.dpi.data_lines = 24, + .channel = OMAP_DSS_CHANNEL_LCD2, + .platform_enable = sdp4430_panel_enable_picodlp, + .platform_disable = sdp4430_panel_disable_picodlp, + .data = &sdp4430_picodlp_pdata, +}; + +static struct omap_dss_device *sdp4430_dss_devices[] = { + &sdp4430_lcd_device, + &sdp4430_lcd2_device, + &sdp4430_hdmi_device, + &sdp4430_picodlp_device, +}; + +static struct omap_dss_board_info sdp4430_dss_data = { + .num_devices = ARRAY_SIZE(sdp4430_dss_devices), + .devices = sdp4430_dss_devices, + .default_device = &sdp4430_lcd_device, +}; + +void __init omap_4430sdp_display_init(void) +{ + int r; + + /* Enable LCD2 by default (instead of Pico DLP) */ + r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, + "display_sel"); + if (r) + pr_err("%s: Could not get display_sel GPIO\n", __func__); + + sdp4430_picodlp_init(); + omap_display_init(&sdp4430_dss_data); + /* + * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and + * later have external pull up on the HDMI I2C lines + */ + if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) + omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); + else + omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); +} + +void __init omap_4430sdp_display_init_of(void) +{ + int r; + + /* Enable LCD2 by default (instead of Pico DLP) */ + r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, + "display_sel"); + if (r) + pr_err("%s: Could not get display_sel GPIO\n", __func__); + + sdp4430_picodlp_init(); + omap_display_init(&sdp4430_dss_data); +} diff --git a/arch/arm/mach-omap2/dss-common.h b/arch/arm/mach-omap2/dss-common.h new file mode 100644 index 0000000..915f6ff --- /dev/null +++ b/arch/arm/mach-omap2/dss-common.h @@ -0,0 +1,14 @@ +#ifndef __OMAP_DSS_COMMON__ +#define __OMAP_DSS_COMMON__ + +/* + * NOTE: this is a transitional file to help with DT adaptation. + * This file will be removed when DSS supports DT. + */ + +void __init omap4_panda_display_init(void); +void __init omap4_panda_display_init_of(void); +void __init omap_4430sdp_display_init(void); +void __init omap_4430sdp_display_init_of(void); + +#endif diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 5ac5cf3..92b5718 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -868,9 +868,9 @@ static void __devexit gpmc_mem_exit(void) } -static void __devinit gpmc_mem_init(void) +static int __devinit gpmc_mem_init(void) { - int cs; + int cs, rc; unsigned long boot_rom_space = 0; /* never allocate the first page, to facilitate bug detection; @@ -890,13 +890,21 @@ static void __devinit gpmc_mem_init(void) if (!gpmc_cs_mem_enabled(cs)) continue; gpmc_cs_get_memconf(cs, &base, &size); - if (gpmc_cs_insert_mem(cs, base, size) < 0) - BUG(); + rc = gpmc_cs_insert_mem(cs, base, size); + if (IS_ERR_VALUE(rc)) { + while (--cs >= 0) + if (gpmc_cs_mem_enabled(cs)) + gpmc_cs_delete_mem(cs); + return rc; + } } + + return 0; } static __devinit int gpmc_probe(struct platform_device *pdev) { + int rc; u32 l; struct resource *res; @@ -936,7 +944,13 @@ static __devinit int gpmc_probe(struct platform_device *pdev) dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l), GPMC_REVISION_MINOR(l)); - gpmc_mem_init(); + rc = gpmc_mem_init(); + if (IS_ERR_VALUE(rc)) { + clk_disable_unprepare(gpmc_l3_clk); + clk_put(gpmc_l3_clk); + dev_err(gpmc_dev, "failed to reserve memory\n"); + return rc; + } if (IS_ERR_VALUE(gpmc_setup_irq())) dev_warn(gpmc_dev, "gpmc_setup_irq failed\n"); diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c index 17f80e4..c47140b 100644 --- a/arch/arm/mach-omap2/mux34xx.c +++ b/arch/arm/mach-omap2/mux34xx.c @@ -614,16 +614,16 @@ static struct omap_mux __initdata omap3_muxmodes[] = { "sys_off_mode", NULL, NULL, NULL, "gpio_9", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_CTS, 150, - "uart1_cts", NULL, NULL, NULL, + "uart1_cts", "ssi1_rdy_tx", NULL, NULL, "gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_RTS, 149, - "uart1_rts", NULL, NULL, NULL, + "uart1_rts", "ssi1_flag_tx", NULL, NULL, "gpio_149", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_RX, 151, - "uart1_rx", NULL, "mcbsp1_clkr", "mcspi4_clk", + "uart1_rx", "ss1_wake_tx", "mcbsp1_clkr", "mcspi4_clk", "gpio_151", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART1_TX, 148, - "uart1_tx", NULL, NULL, NULL, + "uart1_tx", "ssi1_dat_tx", NULL, NULL, "gpio_148", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(UART2_CTS, 144, "uart2_cts", "mcbsp3_dx", "gpt9_pwm_evt", NULL, diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index b969ab1..87cc6d0 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -422,6 +422,38 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v) } /** + * _wait_softreset_complete - wait for an OCP softreset to complete + * @oh: struct omap_hwmod * to wait on + * + * Wait until the IP block represented by @oh reports that its OCP + * softreset is complete. This can be triggered by software (see + * _ocp_softreset()) or by hardware upon returning from off-mode (one + * example is HSMMC). Waits for up to MAX_MODULE_SOFTRESET_WAIT + * microseconds. Returns the number of microseconds waited. + */ +static int _wait_softreset_complete(struct omap_hwmod *oh) +{ + struct omap_hwmod_class_sysconfig *sysc; + u32 softrst_mask; + int c = 0; + + sysc = oh->class->sysc; + + if (sysc->sysc_flags & SYSS_HAS_RESET_STATUS) + omap_test_timeout((omap_hwmod_read(oh, sysc->syss_offs) + & SYSS_RESETDONE_MASK), + MAX_MODULE_SOFTRESET_WAIT, c); + else if (sysc->sysc_flags & SYSC_HAS_RESET_STATUS) { + softrst_mask = (0x1 << sysc->sysc_fields->srst_shift); + omap_test_timeout(!(omap_hwmod_read(oh, sysc->sysc_offs) + & softrst_mask), + MAX_MODULE_SOFTRESET_WAIT, c); + } + + return c; +} + +/** * _set_dmadisable: set OCP_SYSCONFIG.DMADISABLE bit in @v * @oh: struct omap_hwmod * * @@ -1282,6 +1314,18 @@ static void _enable_sysc(struct omap_hwmod *oh) if (!oh->class->sysc) return; + /* + * Wait until reset has completed, this is needed as the IP + * block is reset automatically by hardware in some cases + * (off-mode for example), and the drivers require the + * IP to be ready when they access it + */ + if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET) + _enable_optional_clocks(oh); + _wait_softreset_complete(oh); + if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET) + _disable_optional_clocks(oh); + v = oh->_sysc_cache; sf = oh->class->sysc->sysc_flags; @@ -1804,7 +1848,7 @@ static int _am33xx_disable_module(struct omap_hwmod *oh) */ static int _ocp_softreset(struct omap_hwmod *oh) { - u32 v, softrst_mask; + u32 v; int c = 0; int ret = 0; @@ -1834,19 +1878,7 @@ static int _ocp_softreset(struct omap_hwmod *oh) if (oh->class->sysc->srst_udelay) udelay(oh->class->sysc->srst_udelay); - if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS) - omap_test_timeout((omap_hwmod_read(oh, - oh->class->sysc->syss_offs) - & SYSS_RESETDONE_MASK), - MAX_MODULE_SOFTRESET_WAIT, c); - else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS) { - softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift); - omap_test_timeout(!(omap_hwmod_read(oh, - oh->class->sysc->sysc_offs) - & softrst_mask), - MAX_MODULE_SOFTRESET_WAIT, c); - } - + c = _wait_softreset_complete(oh); if (c == MAX_MODULE_SOFTRESET_WAIT) pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n", oh->name, MAX_MODULE_SOFTRESET_WAIT); @@ -2352,6 +2384,9 @@ static int __init _setup_reset(struct omap_hwmod *oh) if (oh->_state != _HWMOD_STATE_INITIALIZED) return -EINVAL; + if (oh->flags & HWMOD_EXT_OPT_MAIN_CLK) + return -EPERM; + if (oh->rst_lines_cnt == 0) { r = _enable(oh); if (r) { diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 652d028..0b1249e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -21,6 +21,7 @@ #include <linux/io.h> #include <linux/platform_data/gpio-omap.h> #include <linux/power/smartreflex.h> +#include <linux/platform_data/omap_ocp2scp.h> #include <plat/omap_hwmod.h> #include <plat/i2c.h> @@ -2125,6 +2126,14 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = { .name = "mcpdm", .class = &omap44xx_mcpdm_hwmod_class, .clkdm_name = "abe_clkdm", + /* + * It's suspected that the McPDM requires an off-chip main + * functional clock, controlled via I2C. This IP block is + * currently reset very early during boot, before I2C is + * available, so it doesn't seem that we have any choice in + * the kernel other than to avoid resetting it. + */ + .flags = HWMOD_EXT_OPT_MAIN_CLK, .mpu_irqs = omap44xx_mcpdm_irqs, .sdma_reqs = omap44xx_mcpdm_sdma_reqs, .main_clk = "mcpdm_fck", @@ -2681,6 +2690,32 @@ static struct omap_hwmod_class omap44xx_ocp2scp_hwmod_class = { .sysc = &omap44xx_ocp2scp_sysc, }; +/* ocp2scp dev_attr */ +static struct resource omap44xx_usb_phy_and_pll_addrs[] = { + { + .name = "usb_phy", + .start = 0x4a0ad080, + .end = 0x4a0ae000, + .flags = IORESOURCE_MEM, + }, + { + /* XXX: Remove this once control module driver is in place */ + .name = "ctrl_dev", + .start = 0x4a002300, + .end = 0x4a002303, + .flags = IORESOURCE_MEM, + }, + { } +}; + +static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = { + { + .drv_name = "omap-usb2", + .res = omap44xx_usb_phy_and_pll_addrs, + }, + { } +}; + /* ocp2scp_usb_phy */ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { .name = "ocp2scp_usb_phy", @@ -2694,6 +2729,7 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = { .modulemode = MODULEMODE_HWCTRL, }, }, + .dev_attr = ocp2scp_dev_attr, }; /* diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 686137d..67d6613 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -91,6 +91,7 @@ extern void omap3_save_scratchpad_contents(void); #define PM_RTA_ERRATUM_i608 (1 << 0) #define PM_SDRC_WAKEUP_ERRATUM_i583 (1 << 1) +#define PM_PER_MEMORIES_ERRATUM_i582 (1 << 2) #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) extern u16 pm34xx_errata; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index ba670db..3a904de 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -652,14 +652,17 @@ static void __init pm_errata_configure(void) /* Enable the l2 cache toggling in sleep logic */ enable_omap3630_toggle_l2_on_restore(); if (omap_rev() < OMAP3630_REV_ES1_2) - pm34xx_errata |= PM_SDRC_WAKEUP_ERRATUM_i583; + pm34xx_errata |= (PM_SDRC_WAKEUP_ERRATUM_i583 | + PM_PER_MEMORIES_ERRATUM_i582); + } else if (cpu_is_omap34xx()) { + pm34xx_errata |= PM_PER_MEMORIES_ERRATUM_i582; } } int __init omap3_pm_init(void) { struct power_state *pwrst, *tmp; - struct clockdomain *neon_clkdm, *mpu_clkdm; + struct clockdomain *neon_clkdm, *mpu_clkdm, *per_clkdm, *wkup_clkdm; int ret; if (!omap3_has_io_chain_ctrl()) @@ -711,6 +714,8 @@ int __init omap3_pm_init(void) neon_clkdm = clkdm_lookup("neon_clkdm"); mpu_clkdm = clkdm_lookup("mpu_clkdm"); + per_clkdm = clkdm_lookup("per_clkdm"); + wkup_clkdm = clkdm_lookup("wkup_clkdm"); #ifdef CONFIG_SUSPEND omap_pm_suspend = omap3_pm_suspend; @@ -727,6 +732,27 @@ int __init omap3_pm_init(void) if (IS_PM34XX_ERRATUM(PM_RTA_ERRATUM_i608)) omap3630_ctrl_disable_rta(); + /* + * The UART3/4 FIFO and the sidetone memory in McBSP2/3 are + * not correctly reset when the PER powerdomain comes back + * from OFF or OSWR when the CORE powerdomain is kept active. + * See OMAP36xx Erratum i582 "PER Domain reset issue after + * Domain-OFF/OSWR Wakeup". This wakeup dependency is not a + * complete workaround. The kernel must also prevent the PER + * powerdomain from going to OSWR/OFF while the CORE + * powerdomain is not going to OSWR/OFF. And if PER last + * power state was off while CORE last power state was ON, the + * UART3/4 and McBSP2/3 SIDETONE devices need to run a + * self-test using their loopback tests; if that fails, those + * devices are unusable until the PER/CORE can complete a transition + * from ON to OSWR/OFF and then back to ON. + * + * XXX Technically this workaround is only needed if off-mode + * or OSWR is enabled. + */ + if (IS_PM34XX_ERRATUM(PM_PER_MEMORIES_ERRATUM_i582)) + clkdm_add_wkdep(per_clkdm, wkup_clkdm); + clkdm_add_wkdep(neon_clkdm, mpu_clkdm); if (omap_type() != OMAP2_DEVICE_TYPE_GP) { omap3_secure_ram_storage = diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 0405c81..a507cd6 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -329,6 +329,11 @@ void __init omap_serial_init_port(struct omap_board_data *bdata, oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt); + if (console_uart_id == bdata->id) { + omap_device_enable(pdev); + pm_runtime_set_active(&pdev->dev); + } + oh->dev_attr = uart; if (((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads) diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 44f9aa7..69e4663 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -467,7 +467,7 @@ OMAP_SYS_TIMER(3_am33xx) #ifdef CONFIG_ARCH_OMAP4 #ifdef CONFIG_LOCAL_TIMERS static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, - OMAP44XX_LOCAL_TWD_BASE, 29 + OMAP_INTC_START); + OMAP44XX_LOCAL_TWD_BASE, 29); #endif static void __init omap4_timer_init(void) diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 635e109..44c4205 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -366,7 +366,7 @@ static struct regulator_init_data omap4_clk32kg_idata = { }; static struct regulator_consumer_supply omap4_vdd1_supply[] = { - REGULATOR_SUPPLY("vcc", "mpu.0"), + REGULATOR_SUPPLY("vcc", "cpu0"), }; static struct regulator_consumer_supply omap4_vdd2_supply[] = { diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 880249b..75878c3 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -264,7 +264,7 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm) if (initialized) { if (voltdm->pmic->i2c_high_speed != i2c_high_speed) - pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).", + pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).\n", __func__, voltdm->name, i2c_high_speed); return; } diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 0673f0c..2cb2f06 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -2,6 +2,13 @@ if ARCH_ORION5X menu "Orion Implementations" +config ARCH_ORION5X_DT + bool "Marvell Orion5x Flattened Device Tree" + select USE_OF + help + Say 'Y' here if you want your kernel to support the + Marvell Orion5x using flattened device tree. + config MACH_DB88F5281 bool "Marvell Orion-2 Development Board" select I2C_BOARDINFO @@ -96,12 +103,13 @@ config MACH_MV2120 Say 'Y' here if you want your kernel to support the HP Media Vault mv2120 or mv5100. -config MACH_EDMINI_V2 - bool "LaCie Ethernet Disk mini V2" +config MACH_EDMINI_V2_DT + bool "LaCie Ethernet Disk mini V2 (Flattened Device Tree)" select I2C_BOARDINFO + select ARCH_ORION5X_DT help Say 'Y' here if you want your kernel to support the - LaCie Ethernet Disk mini V2. + LaCie Ethernet Disk mini V2 (Flattened Device Tree). config MACH_D2NET bool "LaCie d2 Network" diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index 7f18cda..9e809a7 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_MACH_TS409) += ts409-setup.o tsx09-common.o obj-$(CONFIG_MACH_WRT350N_V2) += wrt350n-v2-setup.o obj-$(CONFIG_MACH_TS78XX) += ts78xx-setup.o obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o -obj-$(CONFIG_MACH_EDMINI_V2) += edmini_v2-setup.o obj-$(CONFIG_MACH_D2NET) += d2net-setup.o obj-$(CONFIG_MACH_BIGDISK) += d2net-setup.o obj-$(CONFIG_MACH_NET2BIG) += net2big-setup.o @@ -22,3 +21,6 @@ obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o obj-$(CONFIG_MACH_LINKSTATION_LSCHL) += ls-chl-setup.o + +obj-$(CONFIG_ARCH_ORION5X_DT) += board-dt.o +obj-$(CONFIG_MACH_EDMINI_V2_DT) += edmini_v2-setup.o diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c new file mode 100644 index 0000000..32e5c21 --- /dev/null +++ b/arch/arm/mach-orion5x/board-dt.c @@ -0,0 +1,79 @@ +/* + * Copyright 2012 (C), Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * arch/arm/mach-orion5x/board-dt.c + * + * Flattened Device Tree board initialization + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <asm/system_misc.h> +#include <asm/mach/arch.h> +#include <mach/orion5x.h> +#include <plat/irq.h> +#include "common.h" + +struct of_dev_auxdata orion5x_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL), + OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0", + NULL), + OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL), + OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL), + OF_DEV_AUXDATA("marvell,orion-crypto", 0xf1090000, "mv_crypto", NULL), + {}, +}; + +static void __init orion5x_dt_init(void) +{ + char *dev_name; + u32 dev, rev; + + orion5x_id(&dev, &rev, &dev_name); + printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk); + + /* + * Setup Orion address map + */ + orion5x_setup_cpu_mbus_bridge(); + + /* Setup root of clk tree */ + clk_init(); + + /* + * Don't issue "Wait for Interrupt" instruction if we are + * running on D0 5281 silicon. + */ + if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) { + printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n"); + disable_hlt(); + } + + if (of_machine_is_compatible("lacie,ethernet-disk-mini-v2")) + edmini_v2_init(); + + of_platform_populate(NULL, of_default_bus_match_table, + orion5x_auxdata_lookup, NULL); +} + +static const char *orion5x_dt_compat[] = { + "marvell,orion5x", + NULL, +}; + +DT_MACHINE_START(ORION5X_DT, "Marvell Orion5x (Flattened Device Tree)") + /* Maintainer: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> */ + .map_io = orion5x_map_io, + .init_early = orion5x_init_early, + .init_irq = orion_dt_init_irq, + .timer = &orion5x_timer, + .init_machine = orion5x_dt_init, + .restart = orion5x_restart, + .dt_compat = orion5x_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index b3eb3da..550f923 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -65,7 +65,7 @@ void __init orion5x_map_io(void) ****************************************************************************/ static struct clk *tclk; -static void __init clk_init(void) +void __init clk_init(void) { tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT, orion5x_tclk); @@ -236,7 +236,7 @@ struct sys_timer orion5x_timer = { /* * Identify device ID and rev from PCIe configuration header space '0'. */ -static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name) +void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name) { orion5x_pcie_id(dev, rev); diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index 31bab92..7db5cdd 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -12,6 +12,8 @@ void orion5x_map_io(void); void orion5x_init_early(void); void orion5x_init_irq(void); void orion5x_init(void); +void orion5x_id(u32 *dev, u32 *rev, char **dev_name); +void clk_init(void); extern int orion5x_tclk; extern struct sys_timer orion5x_timer; @@ -54,6 +56,13 @@ int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys); struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); int orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); +/* board init functions for boards not fully converted to fdt */ +#ifdef CONFIG_MACH_EDMINI_V2_DT +void edmini_v2_init(void); +#else +static inline void edmini_v2_init(void) {}; +#endif + struct meminfo; struct tag; extern void __init tag_fixup_mem32(struct tag *, char **, struct meminfo *); diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c index 355e962..d675e72 100644 --- a/arch/arm/mach-orion5x/edmini_v2-setup.c +++ b/arch/arm/mach-orion5x/edmini_v2-setup.c @@ -115,69 +115,6 @@ static struct i2c_board_info __initdata edmini_v2_i2c_rtc = { }; /***************************************************************************** - * Sata - ****************************************************************************/ - -static struct mv_sata_platform_data edmini_v2_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - * GPIO LED (simple - doesn't use hardware blinking support) - ****************************************************************************/ - -#define EDMINI_V2_GPIO_LED_POWER 16 - -static struct gpio_led edmini_v2_leds[] = { - { - .name = "power:blue", - .gpio = EDMINI_V2_GPIO_LED_POWER, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data edmini_v2_led_data = { - .num_leds = ARRAY_SIZE(edmini_v2_leds), - .leds = edmini_v2_leds, -}; - -static struct platform_device edmini_v2_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &edmini_v2_led_data, - }, -}; - -/**************************************************************************** - * GPIO key - ****************************************************************************/ - -#define EDMINI_V2_GPIO_KEY_POWER 18 - -static struct gpio_keys_button edmini_v2_buttons[] = { - { - .code = KEY_POWER, - .gpio = EDMINI_V2_GPIO_KEY_POWER, - .desc = "Power Button", - .active_low = 0, - }, -}; - -static struct gpio_keys_platform_data edmini_v2_button_data = { - .buttons = edmini_v2_buttons, - .nbuttons = ARRAY_SIZE(edmini_v2_buttons), -}; - -static struct platform_device edmini_v2_gpio_buttons = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &edmini_v2_button_data, - }, -}; - -/***************************************************************************** * General Setup ****************************************************************************/ static unsigned int edminiv2_mpp_modes[] __initdata = { @@ -207,13 +144,8 @@ static unsigned int edminiv2_mpp_modes[] __initdata = { 0, }; -static void __init edmini_v2_init(void) +void __init edmini_v2_init(void) { - /* - * Setup basic Orion functions. Need to be called early. - */ - orion5x_init(); - orion5x_mpp_conf(edminiv2_mpp_modes); /* @@ -221,15 +153,10 @@ static void __init edmini_v2_init(void) */ orion5x_ehci0_init(); orion5x_eth_init(&edmini_v2_eth_data); - orion5x_i2c_init(); - orion5x_sata_init(&edmini_v2_sata_data); - orion5x_uart0_init(); orion5x_setup_dev_boot_win(EDMINI_V2_NOR_BOOT_BASE, EDMINI_V2_NOR_BOOT_SIZE); platform_device_register(&edmini_v2_nor_flash); - platform_device_register(&edmini_v2_gpio_leds); - platform_device_register(&edmini_v2_gpio_buttons); pr_notice("edmini_v2: USB device port, flash write and power-off " "are not yet supported.\n"); @@ -247,16 +174,3 @@ static void __init edmini_v2_init(void) i2c_register_board_info(0, &edmini_v2_i2c_rtc, 1); } - -/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */ -MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2") - /* Maintainer: Christopher Moore <moore@free.fr> */ - .atag_offset = 0x100, - .init_machine = edmini_v2_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END diff --git a/arch/arm/mach-prima2/include/mach/gpio.h b/arch/arm/mach-prima2/include/mach/gpio.h deleted file mode 100644 index 1904bb0..0000000 --- a/arch/arm/mach-prima2/include/mach/gpio.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __MACH_GPIO_H -#define __MACH_GPIO_H - -/* Pull up/down values */ -enum sirfsoc_gpio_pull { - SIRFSOC_GPIO_PULL_NONE, - SIRFSOC_GPIO_PULL_UP, - SIRFSOC_GPIO_PULL_DOWN, -}; - -void sirfsoc_gpio_set_pull(unsigned gpio, unsigned mode); - -#endif diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 5ecbd17..e2c6391 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -28,6 +28,7 @@ #include <linux/mfd/asic3.h> #include <linux/mtd/physmap.h> #include <linux/pda_power.h> +#include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/regulator/driver.h> #include <linux/regulator/gpio-regulator.h> @@ -556,7 +557,7 @@ static struct platform_device hx4700_lcd = { */ static struct platform_pwm_backlight_data backlight_data = { - .pwm_id = 1, + .pwm_id = -1, /* Superseded by pwm_lookup */ .max_brightness = 200, .dft_brightness = 100, .pwm_period_ns = 30923, @@ -571,6 +572,10 @@ static struct platform_device backlight = { }, }; +static struct pwm_lookup hx4700_pwm_lookup[] = { + PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight", NULL), +}; + /* * USB "Transceiver" */ @@ -872,6 +877,7 @@ static void __init hx4700_init(void) pxa_set_stuart_info(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); + pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup)); pxa_set_ficp_info(&ficp_info); pxa27x_set_i2c_power_info(NULL); diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 438f02f..842596d 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -86,10 +86,7 @@ static void spitz_discharge1(int on) gpio_set_value(SPITZ_GPIO_LED_GREEN, on); } -static unsigned long gpio18_config[] = { - GPIO18_RDY, - GPIO18_GPIO, -}; +static unsigned long gpio18_config = GPIO18_GPIO; static void spitz_presuspend(void) { @@ -112,7 +109,7 @@ static void spitz_presuspend(void) PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT; PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0); - pxa2xx_mfp_config(&gpio18_config[0], 1); + pxa2xx_mfp_config(&gpio18_config, 1); gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown"); gpio_free(18); @@ -131,7 +128,6 @@ static void spitz_presuspend(void) static void spitz_postsuspend(void) { - pxa2xx_mfp_config(&gpio18_config[1], 1); } static int spitz_should_wakeup(unsigned int resume_on_alarm) diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c index 749220f..4407b17 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c @@ -163,7 +163,7 @@ static struct clk_lookup s3c2440_clk_lookup[] = { CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n), }; -static int s3c2440_clk_add(struct device *dev, struct subsys_interface *sif) +static int __init_refok s3c2440_clk_add(struct device *dev, struct subsys_interface *sif) { struct clk *clock_upll; struct clk *clock_h; diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c index ed5a95ec..77ee0b7 100644 --- a/arch/arm/mach-s3c24xx/s3c2416.c +++ b/arch/arm/mach-s3c24xx/s3c2416.c @@ -61,6 +61,7 @@ #include <plat/nand-core.h> #include <plat/adc-core.h> #include <plat/rtc-core.h> +#include <plat/spi-core.h> static struct map_desc s3c2416_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), @@ -132,6 +133,7 @@ void __init s3c2416_map_io(void) /* initialize device information early */ s3c2416_default_sdhci0(); s3c2416_default_sdhci1(); + s3c64xx_spi_setname("s3c2443-spi"); iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc)); } diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c index ab648ad..165b6a6 100644 --- a/arch/arm/mach-s3c24xx/s3c2443.c +++ b/arch/arm/mach-s3c24xx/s3c2443.c @@ -43,6 +43,7 @@ #include <plat/nand-core.h> #include <plat/adc-core.h> #include <plat/rtc-core.h> +#include <plat/spi-core.h> static struct map_desc s3c2443_iodesc[] __initdata = { IODESC_ENT(WATCHDOG), @@ -100,6 +101,9 @@ void __init s3c2443_map_io(void) s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull; s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull; + /* initialize device information early */ + s3c64xx_spi_setname("s3c2443-spi"); + iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc)); } diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c index 6e6a0a9..111e404 100644 --- a/arch/arm/mach-s5p64x0/common.c +++ b/arch/arm/mach-s5p64x0/common.c @@ -44,6 +44,7 @@ #include <plat/sdhci.h> #include <plat/adc-core.h> #include <plat/fb-core.h> +#include <plat/spi-core.h> #include <plat/gpio-cfg.h> #include <plat/regs-irqtype.h> #include <plat/regs-serial.h> @@ -179,6 +180,7 @@ void __init s5p6440_map_io(void) /* initialize any device information early */ s3c_adc_setname("s3c64xx-adc"); s3c_fb_setname("s5p64x0-fb"); + s3c64xx_spi_setname("s5p64x0-spi"); s5p64x0_default_sdhci0(); s5p64x0_default_sdhci1(); @@ -193,6 +195,7 @@ void __init s5p6450_map_io(void) /* initialize any device information early */ s3c_adc_setname("s3c64xx-adc"); s3c_fb_setname("s5p64x0-fb"); + s3c64xx_spi_setname("s5p64x0-spi"); s5p64x0_default_sdhci0(); s5p64x0_default_sdhci1(); diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c index 6219086..cc6e561 100644 --- a/arch/arm/mach-s5pc100/common.c +++ b/arch/arm/mach-s5pc100/common.c @@ -45,6 +45,7 @@ #include <plat/fb-core.h> #include <plat/iic-core.h> #include <plat/onenand-core.h> +#include <plat/spi-core.h> #include <plat/regs-serial.h> #include <plat/watchdog-reset.h> @@ -165,6 +166,8 @@ void __init s5pc100_map_io(void) s3c_onenand_setname("s5pc100-onenand"); s3c_fb_setname("s5pc100-fb"); s3c_cfcon_setname("s5pc100-pata"); + + s3c64xx_spi_setname("s5pc100-spi"); } void __init s5pc100_init_clocks(int xtal) diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c index 4c9e902..a0c50ef 100644 --- a/arch/arm/mach-s5pv210/common.c +++ b/arch/arm/mach-s5pv210/common.c @@ -43,6 +43,7 @@ #include <plat/iic-core.h> #include <plat/keypad-core.h> #include <plat/tv-core.h> +#include <plat/spi-core.h> #include <plat/regs-serial.h> #include "common.h" @@ -196,6 +197,8 @@ void __init s5pv210_map_io(void) /* setup TV devices */ s5p_hdmi_setname("s5pv210-hdmi"); + + s3c64xx_spi_setname("s5pv210-spi"); } void __init s5pv210_init_clocks(int xtal) diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 8ae100c..f58c3ea 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -50,17 +50,6 @@ config ARCH_EMEV2 comment "SH-Mobile Board Type" -config MACH_G3EVM - bool "G3EVM board" - depends on ARCH_SH7367 - select ARCH_REQUIRE_GPIOLIB - -config MACH_G4EVM - bool "G4EVM board" - depends on ARCH_SH7377 - select ARCH_REQUIRE_GPIOLIB - select REGULATOR_FIXED_VOLTAGE if REGULATOR - config MACH_AP4EVB bool "AP4EVB board" depends on ARCH_SH7372 @@ -95,6 +84,7 @@ config MACH_MACKEREL select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR select SND_SOC_AK4642 if SND_SIMPLE_CARD + select USE_OF config MACH_KOTA2 bool "KOTA2 board" @@ -146,8 +136,7 @@ menu "Memory configuration" config MEMORY_START hex "Physical memory start address" - default "0x50000000" if MACH_G3EVM - default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \ + default "0x40000000" if MACH_AP4EVB || MACH_AG5EVM || \ MACH_MACKEREL || MACH_BONITO || \ MACH_ARMADILLO800EVA default "0x41000000" if MACH_KOTA2 @@ -159,8 +148,6 @@ config MEMORY_START config MEMORY_SIZE hex "Physical memory size" - default "0x08000000" if MACH_G3EVM - default "0x08000000" if MACH_G4EVM default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \ MACH_ARMADILLO800EVA default "0x1e000000" if MACH_KOTA2 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index fe2c97c..bd2633b 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -45,8 +45,6 @@ obj-$(CONFIG_ARCH_R8A7740) += pm-r8a7740.o obj-$(CONFIG_ARCH_R8A7779) += pm-r8a7779.o # Board objects -obj-$(CONFIG_MACH_G3EVM) += board-g3evm.o -obj-$(CONFIG_MACH_G4EVM) += board-g4evm.o obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o obj-$(CONFIG_MACH_AG5EVM) += board-ag5evm.o obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 2912eab..499e6e3 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -1196,7 +1196,7 @@ static void __init eva_init(void) #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 32K*8way */ - l2x0_init(__io(0xf0002000), 0x40440000, 0x82000fff); + l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff); #endif i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices)); @@ -1229,6 +1229,13 @@ static void __init eva_add_early_devices(void) shmobile_timer.init = eva_earlytimer_init; } +#define RESCNT2 IOMEM(0xe6188020) +static void eva_restart(char mode, const char *cmd) +{ + /* Do soft power on reset */ + writel((1 << 31), RESCNT2); +} + static const char *eva_boards_compat_dt[] __initdata = { "renesas,armadillo800eva", NULL, @@ -1243,4 +1250,5 @@ DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva") .init_late = shmobile_init_late, .timer = &shmobile_timer, .dt_compat = eva_boards_compat_dt, + .restart = eva_restart, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c deleted file mode 100644 index b179d4c..0000000 --- a/arch/arm/mach-shmobile/board-g3evm.c +++ /dev/null @@ -1,343 +0,0 @@ -/* - * G3EVM board support - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2008 Yoshihiro Shimoda - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/sh_flctl.h> -#include <linux/usb/r8a66597.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/input/sh_keysc.h> -#include <linux/dma-mapping.h> -#include <mach/irqs.h> -#include <mach/sh7367.h> -#include <mach/common.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -/* - * IrDA - * - * S67: 5bit : ON power - * : 6bit : ON remote control - * OFF IrDA - */ - -static struct mtd_partition nor_flash_partitions[] = { - { - .name = "loader", - .offset = 0x00000000, - .size = 512 * 1024, - }, - { - .name = "bootenv", - .offset = MTDPART_OFS_APPEND, - .size = 512 * 1024, - }, - { - .name = "kernel_ro", - .offset = MTDPART_OFS_APPEND, - .size = 8 * 1024 * 1024, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = 8 * 1024 * 1024, - }, - { - .name = "data", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct physmap_flash_data nor_flash_data = { - .width = 2, - .parts = nor_flash_partitions, - .nr_parts = ARRAY_SIZE(nor_flash_partitions), -}; - -static struct resource nor_flash_resources[] = { - [0] = { - .start = 0x00000000, - .end = 0x08000000 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device nor_flash_device = { - .name = "physmap-flash", - .dev = { - .platform_data = &nor_flash_data, - }, - .num_resources = ARRAY_SIZE(nor_flash_resources), - .resource = nor_flash_resources, -}; - -/* USBHS */ -static void usb_host_port_power(int port, int power) -{ - if (!power) /* only power-on supported for now */ - return; - - /* set VBOUT/PWEN and EXTLP0 in DVSTCTR */ - __raw_writew(__raw_readw(IOMEM(0xe6890008)) | 0x600, IOMEM(0xe6890008)); -} - -static struct r8a66597_platdata usb_host_data = { - .on_chip = 1, - .port_power = usb_host_port_power, -}; - -static struct resource usb_host_resources[] = { - [0] = { - .name = "USBHS", - .start = 0xe6890000, - .end = 0xe68900e5, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xa20), /* USBHS_USHI0 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usb_host_device = { - .name = "r8a66597_hcd", - .id = 0, - .dev = { - .platform_data = &usb_host_data, - .dma_mask = NULL, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(usb_host_resources), - .resource = usb_host_resources, -}; - -/* KEYSC */ -static struct sh_keysc_info keysc_info = { - .mode = SH_KEYSC_MODE_5, - .scan_timing = 3, - .delay = 100, - .keycodes = { - KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, KEY_G, - KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, KEY_M, KEY_N, - KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U, - KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP, - KEY_WAKEUP, KEY_COFFEE, KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, - KEY_5, KEY_6, KEY_7, KEY_8, KEY_9, KEY_STOP, KEY_COMPUTER, - }, -}; - -static struct resource keysc_resources[] = { - [0] = { - .name = "KEYSC", - .start = 0xe61b0000, - .end = 0xe61b000f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xbe0), /* KEYSC_KEY */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device keysc_device = { - .name = "sh_keysc", - .num_resources = ARRAY_SIZE(keysc_resources), - .resource = keysc_resources, - .dev = { - .platform_data = &keysc_info, - }, -}; - -static struct mtd_partition nand_partition_info[] = { - { - .name = "system", - .offset = 0, - .size = 64 * 1024 * 1024, - }, - { - .name = "userdata", - .offset = MTDPART_OFS_APPEND, - .size = 128 * 1024 * 1024, - }, - { - .name = "cache", - .offset = MTDPART_OFS_APPEND, - .size = 64 * 1024 * 1024, - }, -}; - -static struct resource nand_flash_resources[] = { - [0] = { - .start = 0xe6a30000, - .end = 0xe6a3009b, - .flags = IORESOURCE_MEM, - } -}; - -static struct sh_flctl_platform_data nand_flash_data = { - .parts = nand_partition_info, - .nr_parts = ARRAY_SIZE(nand_partition_info), - .flcmncr_val = QTSEL_E | FCKSEL_E | TYPESEL_SET | NANWF_E - | SHBUSSEL | SEL_16BIT, -}; - -static struct platform_device nand_flash_device = { - .name = "sh_flctl", - .resource = nand_flash_resources, - .num_resources = ARRAY_SIZE(nand_flash_resources), - .dev = { - .platform_data = &nand_flash_data, - }, -}; - -static struct resource irda_resources[] = { - [0] = { - .start = 0xE6D00000, - .end = 0xE6D01FD4 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x480), /* IRDA */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device irda_device = { - .name = "sh_irda", - .id = -1, - .resource = irda_resources, - .num_resources = ARRAY_SIZE(irda_resources), -}; - -static struct platform_device *g3evm_devices[] __initdata = { - &nor_flash_device, - &usb_host_device, - &keysc_device, - &nand_flash_device, - &irda_device, -}; - -static void __init g3evm_init(void) -{ - sh7367_pinmux_init(); - - /* Lit DS4 LED */ - gpio_request(GPIO_PORT22, NULL); - gpio_direction_output(GPIO_PORT22, 1); - gpio_export(GPIO_PORT22, 0); - - /* Lit DS8 LED */ - gpio_request(GPIO_PORT23, NULL); - gpio_direction_output(GPIO_PORT23, 1); - gpio_export(GPIO_PORT23, 0); - - /* Lit DS3 LED */ - gpio_request(GPIO_PORT24, NULL); - gpio_direction_output(GPIO_PORT24, 1); - gpio_export(GPIO_PORT24, 0); - - /* SCIFA1 */ - gpio_request(GPIO_FN_SCIFA1_TXD, NULL); - gpio_request(GPIO_FN_SCIFA1_RXD, NULL); - gpio_request(GPIO_FN_SCIFA1_CTS, NULL); - gpio_request(GPIO_FN_SCIFA1_RTS, NULL); - - /* USBHS */ - gpio_request(GPIO_FN_VBUS0, NULL); - gpio_request(GPIO_FN_PWEN, NULL); - gpio_request(GPIO_FN_OVCN, NULL); - gpio_request(GPIO_FN_OVCN2, NULL); - gpio_request(GPIO_FN_EXTLP, NULL); - gpio_request(GPIO_FN_IDIN, NULL); - - /* setup USB phy */ - __raw_writew(0x0300, IOMEM(0xe605810a)); /* USBCR1 */ - __raw_writew(0x00e0, IOMEM(0xe60581c0)); /* CPFCH */ - __raw_writew(0x6010, IOMEM(0xe60581c6)); /* CGPOSR */ - __raw_writew(0x8a0a, IOMEM(0xe605810c)); /* USBCR2 */ - - /* KEYSC @ CN7 */ - gpio_request(GPIO_FN_PORT42_KEYOUT0, NULL); - gpio_request(GPIO_FN_PORT43_KEYOUT1, NULL); - gpio_request(GPIO_FN_PORT44_KEYOUT2, NULL); - gpio_request(GPIO_FN_PORT45_KEYOUT3, NULL); - gpio_request(GPIO_FN_PORT46_KEYOUT4, NULL); - gpio_request(GPIO_FN_PORT47_KEYOUT5, NULL); - gpio_request(GPIO_FN_PORT48_KEYIN0_PU, NULL); - gpio_request(GPIO_FN_PORT49_KEYIN1_PU, NULL); - gpio_request(GPIO_FN_PORT50_KEYIN2_PU, NULL); - gpio_request(GPIO_FN_PORT55_KEYIN3_PU, NULL); - gpio_request(GPIO_FN_PORT56_KEYIN4_PU, NULL); - gpio_request(GPIO_FN_PORT57_KEYIN5_PU, NULL); - gpio_request(GPIO_FN_PORT58_KEYIN6_PU, NULL); - - /* FLCTL */ - gpio_request(GPIO_FN_FCE0, NULL); - gpio_request(GPIO_FN_D0_ED0_NAF0, NULL); - gpio_request(GPIO_FN_D1_ED1_NAF1, NULL); - gpio_request(GPIO_FN_D2_ED2_NAF2, NULL); - gpio_request(GPIO_FN_D3_ED3_NAF3, NULL); - gpio_request(GPIO_FN_D4_ED4_NAF4, NULL); - gpio_request(GPIO_FN_D5_ED5_NAF5, NULL); - gpio_request(GPIO_FN_D6_ED6_NAF6, NULL); - gpio_request(GPIO_FN_D7_ED7_NAF7, NULL); - gpio_request(GPIO_FN_D8_ED8_NAF8, NULL); - gpio_request(GPIO_FN_D9_ED9_NAF9, NULL); - gpio_request(GPIO_FN_D10_ED10_NAF10, NULL); - gpio_request(GPIO_FN_D11_ED11_NAF11, NULL); - gpio_request(GPIO_FN_D12_ED12_NAF12, NULL); - gpio_request(GPIO_FN_D13_ED13_NAF13, NULL); - gpio_request(GPIO_FN_D14_ED14_NAF14, NULL); - gpio_request(GPIO_FN_D15_ED15_NAF15, NULL); - gpio_request(GPIO_FN_WE0_XWR0_FWE, NULL); - gpio_request(GPIO_FN_FRB, NULL); - /* FOE, FCDE, FSC on dedicated pins */ - __raw_writel(__raw_readl(IOMEM(0xe6158048)) & ~(1 << 15), IOMEM(0xe6158048)); - - /* IrDA */ - gpio_request(GPIO_FN_IRDA_OUT, NULL); - gpio_request(GPIO_FN_IRDA_IN, NULL); - gpio_request(GPIO_FN_IRDA_FIRSEL, NULL); - - sh7367_add_standard_devices(); - - platform_add_devices(g3evm_devices, ARRAY_SIZE(g3evm_devices)); -} - -MACHINE_START(G3EVM, "g3evm") - .map_io = sh7367_map_io, - .init_early = sh7367_add_early_devices, - .init_irq = sh7367_init_irq, - .handle_irq = shmobile_handle_irq_intc, - .init_machine = g3evm_init, - .init_late = shmobile_init_late, - .timer = &shmobile_timer, -MACHINE_END diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c deleted file mode 100644 index 35c126c..0000000 --- a/arch/arm/mach-shmobile/board-g4evm.c +++ /dev/null @@ -1,384 +0,0 @@ -/* - * G4EVM board support - * - * Copyright (C) 2010 Magnus Damm - * Copyright (C) 2008 Yoshihiro Shimoda - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> -#include <linux/usb/r8a66597.h> -#include <linux/io.h> -#include <linux/input.h> -#include <linux/input/sh_keysc.h> -#include <linux/mmc/host.h> -#include <linux/mmc/sh_mobile_sdhi.h> -#include <linux/gpio.h> -#include <linux/dma-mapping.h> -#include <mach/irqs.h> -#include <mach/sh7377.h> -#include <mach/common.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include "sh-gpio.h" - -/* - * SDHI - * - * SDHI0 : card detection is possible - * SDHI1 : card detection is impossible - * - * [G4-MAIN-BOARD] - * JP74 : short # DBG_2V8A for SDHI0 - * JP75 : NC # DBG_3V3A for SDHI0 - * JP76 : NC # DBG_3V3A_SD for SDHI0 - * JP77 : NC # 3V3A_SDIO for SDHI1 - * JP78 : short # DBG_2V8A for SDHI1 - * JP79 : NC # DBG_3V3A for SDHI1 - * JP80 : NC # DBG_3V3A_SD for SDHI1 - * - * [G4-CORE-BOARD] - * S32 : all off # to dissever from G3-CORE_DBG board - * S33 : all off # to dissever from G3-CORE_DBG board - * - * [G3-CORE_DBG-BOARD] - * S1 : all off # to dissever from G3-CORE_DBG board - * S3 : all off # to dissever from G3-CORE_DBG board - * S4 : all off # to dissever from G3-CORE_DBG board - */ - -static struct mtd_partition nor_flash_partitions[] = { - { - .name = "loader", - .offset = 0x00000000, - .size = 512 * 1024, - }, - { - .name = "bootenv", - .offset = MTDPART_OFS_APPEND, - .size = 512 * 1024, - }, - { - .name = "kernel_ro", - .offset = MTDPART_OFS_APPEND, - .size = 8 * 1024 * 1024, - .mask_flags = MTD_WRITEABLE, - }, - { - .name = "kernel", - .offset = MTDPART_OFS_APPEND, - .size = 8 * 1024 * 1024, - }, - { - .name = "data", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct physmap_flash_data nor_flash_data = { - .width = 2, - .parts = nor_flash_partitions, - .nr_parts = ARRAY_SIZE(nor_flash_partitions), -}; - -static struct resource nor_flash_resources[] = { - [0] = { - .start = 0x00000000, - .end = 0x08000000 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device nor_flash_device = { - .name = "physmap-flash", - .dev = { - .platform_data = &nor_flash_data, - }, - .num_resources = ARRAY_SIZE(nor_flash_resources), - .resource = nor_flash_resources, -}; - -/* USBHS */ -static void usb_host_port_power(int port, int power) -{ - if (!power) /* only power-on supported for now */ - return; - - /* set VBOUT/PWEN and EXTLP0 in DVSTCTR */ - __raw_writew(__raw_readw(IOMEM(0xe6890008)) | 0x600, IOMEM(0xe6890008)); -} - -static struct r8a66597_platdata usb_host_data = { - .on_chip = 1, - .port_power = usb_host_port_power, -}; - -static struct resource usb_host_resources[] = { - [0] = { - .name = "USBHS", - .start = 0xe6890000, - .end = 0xe68900e5, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x0a20), /* USBHS_USHI0 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usb_host_device = { - .name = "r8a66597_hcd", - .id = 0, - .dev = { - .platform_data = &usb_host_data, - .dma_mask = NULL, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(usb_host_resources), - .resource = usb_host_resources, -}; - -/* KEYSC */ -static struct sh_keysc_info keysc_info = { - .mode = SH_KEYSC_MODE_5, - .scan_timing = 3, - .delay = 100, - .keycodes = { - KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, - KEY_G, KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, - KEY_M, KEY_N, KEY_U, KEY_P, KEY_Q, KEY_R, - KEY_S, KEY_T, KEY_U, KEY_V, KEY_W, KEY_X, - KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE, - KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, - KEY_6, KEY_7, KEY_8, KEY_9, KEY_STOP, KEY_COMPUTER, - }, -}; - -static struct resource keysc_resources[] = { - [0] = { - .name = "KEYSC", - .start = 0xe61b0000, - .end = 0xe61b000f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x0be0), /* KEYSC_KEY */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device keysc_device = { - .name = "sh_keysc", - .id = 0, /* keysc0 clock */ - .num_resources = ARRAY_SIZE(keysc_resources), - .resource = keysc_resources, - .dev = { - .platform_data = &keysc_info, - }, -}; - -/* Fixed 3.3V regulator to be used by SDHI0 and SDHI1 */ -static struct regulator_consumer_supply fixed3v3_power_consumers[] = -{ - REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), - REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), - REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), -}; - -/* SDHI */ -static struct sh_mobile_sdhi_info sdhi0_info = { - .tmio_caps = MMC_CAP_SDIO_IRQ, -}; - -static struct resource sdhi0_resources[] = { - [0] = { - .name = "SDHI0", - .start = 0xe6d50000, - .end = 0xe6d500ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x0e00), /* SDHI0 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device sdhi0_device = { - .name = "sh_mobile_sdhi", - .num_resources = ARRAY_SIZE(sdhi0_resources), - .resource = sdhi0_resources, - .id = 0, - .dev = { - .platform_data = &sdhi0_info, - }, -}; - -static struct sh_mobile_sdhi_info sdhi1_info = { - .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ, -}; - -static struct resource sdhi1_resources[] = { - [0] = { - .name = "SDHI1", - .start = 0xe6d60000, - .end = 0xe6d600ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x0e80), /* SDHI1 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device sdhi1_device = { - .name = "sh_mobile_sdhi", - .num_resources = ARRAY_SIZE(sdhi1_resources), - .resource = sdhi1_resources, - .id = 1, - .dev = { - .platform_data = &sdhi1_info, - }, -}; - -static struct platform_device *g4evm_devices[] __initdata = { - &nor_flash_device, - &usb_host_device, - &keysc_device, - &sdhi0_device, - &sdhi1_device, -}; - -#define GPIO_SDHID0_D0 IOMEM(0xe60520fc) -#define GPIO_SDHID0_D1 IOMEM(0xe60520fd) -#define GPIO_SDHID0_D2 IOMEM(0xe60520fe) -#define GPIO_SDHID0_D3 IOMEM(0xe60520ff) -#define GPIO_SDHICMD0 IOMEM(0xe6052100) - -#define GPIO_SDHID1_D0 IOMEM(0xe6052103) -#define GPIO_SDHID1_D1 IOMEM(0xe6052104) -#define GPIO_SDHID1_D2 IOMEM(0xe6052105) -#define GPIO_SDHID1_D3 IOMEM(0xe6052106) -#define GPIO_SDHICMD1 IOMEM(0xe6052107) - -static void __init g4evm_init(void) -{ - regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, - ARRAY_SIZE(fixed3v3_power_consumers), 3300000); - - sh7377_pinmux_init(); - - /* Lit DS14 LED */ - gpio_request(GPIO_PORT109, NULL); - gpio_direction_output(GPIO_PORT109, 1); - gpio_export(GPIO_PORT109, 1); - - /* Lit DS15 LED */ - gpio_request(GPIO_PORT110, NULL); - gpio_direction_output(GPIO_PORT110, 1); - gpio_export(GPIO_PORT110, 1); - - /* Lit DS16 LED */ - gpio_request(GPIO_PORT112, NULL); - gpio_direction_output(GPIO_PORT112, 1); - gpio_export(GPIO_PORT112, 1); - - /* Lit DS17 LED */ - gpio_request(GPIO_PORT113, NULL); - gpio_direction_output(GPIO_PORT113, 1); - gpio_export(GPIO_PORT113, 1); - - /* USBHS */ - gpio_request(GPIO_FN_VBUS_0, NULL); - gpio_request(GPIO_FN_PWEN, NULL); - gpio_request(GPIO_FN_OVCN, NULL); - gpio_request(GPIO_FN_OVCN2, NULL); - gpio_request(GPIO_FN_EXTLP, NULL); - gpio_request(GPIO_FN_IDIN, NULL); - - /* setup USB phy */ - __raw_writew(0x0200, IOMEM(0xe605810a)); /* USBCR1 */ - __raw_writew(0x00e0, IOMEM(0xe60581c0)); /* CPFCH */ - __raw_writew(0x6010, IOMEM(0xe60581c6)); /* CGPOSR */ - __raw_writew(0x8a0a, IOMEM(0xe605810c)); /* USBCR2 */ - - /* KEYSC @ CN31 */ - gpio_request(GPIO_FN_PORT60_KEYOUT5, NULL); - gpio_request(GPIO_FN_PORT61_KEYOUT4, NULL); - gpio_request(GPIO_FN_PORT62_KEYOUT3, NULL); - gpio_request(GPIO_FN_PORT63_KEYOUT2, NULL); - gpio_request(GPIO_FN_PORT64_KEYOUT1, NULL); - gpio_request(GPIO_FN_PORT65_KEYOUT0, NULL); - gpio_request(GPIO_FN_PORT66_KEYIN0_PU, NULL); - gpio_request(GPIO_FN_PORT67_KEYIN1_PU, NULL); - gpio_request(GPIO_FN_PORT68_KEYIN2_PU, NULL); - gpio_request(GPIO_FN_PORT69_KEYIN3_PU, NULL); - gpio_request(GPIO_FN_PORT70_KEYIN4_PU, NULL); - gpio_request(GPIO_FN_PORT71_KEYIN5_PU, NULL); - gpio_request(GPIO_FN_PORT72_KEYIN6_PU, NULL); - - /* SDHI0 */ - gpio_request(GPIO_FN_SDHICLK0, NULL); - gpio_request(GPIO_FN_SDHICD0, NULL); - gpio_request(GPIO_FN_SDHID0_0, NULL); - gpio_request(GPIO_FN_SDHID0_1, NULL); - gpio_request(GPIO_FN_SDHID0_2, NULL); - gpio_request(GPIO_FN_SDHID0_3, NULL); - gpio_request(GPIO_FN_SDHICMD0, NULL); - gpio_request(GPIO_FN_SDHIWP0, NULL); - gpio_request_pullup(GPIO_SDHID0_D0); - gpio_request_pullup(GPIO_SDHID0_D1); - gpio_request_pullup(GPIO_SDHID0_D2); - gpio_request_pullup(GPIO_SDHID0_D3); - gpio_request_pullup(GPIO_SDHICMD0); - - /* SDHI1 */ - gpio_request(GPIO_FN_SDHICLK1, NULL); - gpio_request(GPIO_FN_SDHID1_0, NULL); - gpio_request(GPIO_FN_SDHID1_1, NULL); - gpio_request(GPIO_FN_SDHID1_2, NULL); - gpio_request(GPIO_FN_SDHID1_3, NULL); - gpio_request(GPIO_FN_SDHICMD1, NULL); - gpio_request_pullup(GPIO_SDHID1_D0); - gpio_request_pullup(GPIO_SDHID1_D1); - gpio_request_pullup(GPIO_SDHID1_D2); - gpio_request_pullup(GPIO_SDHID1_D3); - gpio_request_pullup(GPIO_SDHICMD1); - - sh7377_add_standard_devices(); - - platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices)); -} - -MACHINE_START(G4EVM, "g4evm") - .map_io = sh7377_map_io, - .init_early = sh7377_add_early_devices, - .init_irq = sh7377_init_irq, - .handle_irq = shmobile_handle_irq_intc, - .init_machine = g4evm_init, - .init_late = shmobile_init_late, - .timer = &shmobile_timer, -MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index 0a43f31..f63f2ee 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -384,6 +384,8 @@ static struct regulator_consumer_supply fixed2v8_power_consumers[] = /* SDHI */ static struct sh_mobile_sdhi_info sdhi0_info = { + .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, .tmio_caps = MMC_CAP_SD_HIGHSPEED, .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, @@ -424,6 +426,8 @@ static struct platform_device sdhi0_device = { /* Micro SD */ static struct sh_mobile_sdhi_info sdhi2_info = { + .dma_slave_tx = SHDMA_SLAVE_SDHI2_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI2_RX, .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD | TMIO_MMC_WRPROTECT_DISABLE, @@ -557,7 +561,15 @@ static struct i2c_board_info i2c0_devices[] = { }, { I2C_BOARD_INFO("r2025sd", 0x32), - } + }, + { + I2C_BOARD_INFO("ak8975", 0x0c), + .irq = intcs_evt2irq(0x3380), /* IRQ28 */ + }, + { + I2C_BOARD_INFO("adxl34x", 0x1d), + .irq = intcs_evt2irq(0x3340), /* IRQ26 */ + }, }; static struct i2c_board_info i2c1_devices[] = { diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 0c27c81..39b8f2e 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -1651,7 +1651,12 @@ static void __init mackerel_init(void) pm_clk_add(&hdmi_lcdc_device.dev, "hdmi"); } -MACHINE_START(MACKEREL, "mackerel") +static const char *mackerel_boards_compat_dt[] __initdata = { + "renesas,mackerel", + NULL, +}; + +DT_MACHINE_START(MACKEREL_DT, "mackerel") .map_io = sh7372_map_io, .init_early = sh7372_add_early_devices, .init_irq = sh7372_init_irq, @@ -1659,4 +1664,5 @@ MACHINE_START(MACKEREL, "mackerel") .init_machine = mackerel_init, .init_late = sh7372_pm_init_late, .timer = &shmobile_timer, + .dt_compat = mackerel_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index b8a7525..69f7f46 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -30,6 +30,8 @@ #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/smsc911x.h> +#include <linux/spi/spi.h> +#include <linux/spi/sh_hspi.h> #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mfd/tmio.h> #include <mach/hardware.h> @@ -126,10 +128,27 @@ static struct platform_device thermal_device = { .num_resources = ARRAY_SIZE(thermal_resources), }; +/* HSPI */ +static struct resource hspi_resources[] = { + [0] = { + .start = 0xFFFC7000, + .end = 0xFFFC7018 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device hspi_device = { + .name = "sh-hspi", + .id = 0, + .resource = hspi_resources, + .num_resources = ARRAY_SIZE(hspi_resources), +}; + static struct platform_device *marzen_devices[] __initdata = { ð_device, &sdhi0_device, &thermal_device, + &hspi_device, }; static void __init marzen_init(void) @@ -163,6 +182,12 @@ static void __init marzen_init(void) gpio_request(GPIO_FN_SD0_CD, NULL); gpio_request(GPIO_FN_SD0_WP, NULL); + /* HSPI 0 */ + gpio_request(GPIO_FN_HSPI_CLK0, NULL); + gpio_request(GPIO_FN_HSPI_CS0, NULL); + gpio_request(GPIO_FN_HSPI_TX0, NULL); + gpio_request(GPIO_FN_HSPI_RX0, NULL); + r8a7779_add_standard_devices(); platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices)); } diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index 3cafb6a..37b2a31 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -24,17 +24,17 @@ #include <linux/clkdev.h> #include <mach/common.h> -#define FRQMR 0xffc80014 -#define MSTPCR0 0xffc80030 -#define MSTPCR1 0xffc80034 -#define MSTPCR3 0xffc8003c -#define MSTPSR1 0xffc80044 -#define MSTPSR4 0xffc80048 -#define MSTPSR6 0xffc8004c -#define MSTPCR4 0xffc80050 -#define MSTPCR5 0xffc80054 -#define MSTPCR6 0xffc80058 -#define MSTPCR7 0xffc80040 +#define FRQMR IOMEM(0xffc80014) +#define MSTPCR0 IOMEM(0xffc80030) +#define MSTPCR1 IOMEM(0xffc80034) +#define MSTPCR3 IOMEM(0xffc8003c) +#define MSTPSR1 IOMEM(0xffc80044) +#define MSTPSR4 IOMEM(0xffc80048) +#define MSTPSR6 IOMEM(0xffc8004c) +#define MSTPCR4 IOMEM(0xffc80050) +#define MSTPCR5 IOMEM(0xffc80054) +#define MSTPCR6 IOMEM(0xffc80058) +#define MSTPCR7 IOMEM(0xffc80040) /* ioremap() through clock mapping mandatory to avoid * collision with ARM coherent DMA virtual memory range. diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index 2917668..ebbffc2 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -247,7 +247,7 @@ void __init r8a7779_add_standard_devices(void) { #ifdef CONFIG_CACHE_L2X0 /* Early BRESP enable, Shared attribute override enable, 64K*16way */ - l2x0_init((void __iomem __force *)(0xf0100000), 0x40470000, 0x82000fff); + l2x0_init(IOMEM(0xf0100000), 0x40470000, 0x82000fff); #endif r8a7779_pm_init(); diff --git a/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h deleted file mode 100644 index e69de29..0000000 --- a/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h +++ /dev/null diff --git a/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h deleted file mode 100644 index e69de29..0000000 --- a/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h +++ /dev/null diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c index 57e235f..aa5325c 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/board-dt-tegra20.c @@ -182,7 +182,7 @@ DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)") .init_early = tegra20_init_early, .init_irq = tegra_dt_init_irq, .handle_irq = gic_handle_irq, - .timer = &tegra_timer, + .timer = &tegra_sys_timer, .init_machine = tegra_dt_init, .init_late = tegra_dt_init_late, .restart = tegra_assert_system_reset, diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c index e4a676d..5e92a81 100644 --- a/arch/arm/mach-tegra/board-dt-tegra30.c +++ b/arch/arm/mach-tegra/board-dt-tegra30.c @@ -89,7 +89,7 @@ DT_MACHINE_START(TEGRA30_DT, "NVIDIA Tegra30 (Flattened Device Tree)") .init_early = tegra30_init_early, .init_irq = tegra_dt_init_irq, .handle_irq = gic_handle_irq, - .timer = &tegra_timer, + .timer = &tegra_sys_timer, .init_machine = tegra30_dt_init, .init_late = tegra_init_late, .restart = tegra_assert_system_reset, diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h index f88e514..91fbe73 100644 --- a/arch/arm/mach-tegra/board.h +++ b/arch/arm/mach-tegra/board.h @@ -55,5 +55,5 @@ static inline int harmony_pcie_init(void) { return 0; } void __init tegra_paz00_wifikill_init(void); -extern struct sys_timer tegra_timer; +extern struct sys_timer tegra_sys_timer; #endif diff --git a/arch/arm/mach-tegra/tegra20_clocks_data.c b/arch/arm/mach-tegra/tegra20_clocks_data.c index cc9b5fd..8d398a3 100644 --- a/arch/arm/mach-tegra/tegra20_clocks_data.c +++ b/arch/arm/mach-tegra/tegra20_clocks_data.c @@ -953,6 +953,7 @@ PERIPH_CLK(pcie_xclk, NULL, "pcie_xclk", 74, 0, 26000000, mux_clk_m, static struct clk *tegra_list_clks[] = { &tegra_apbdma, &tegra_rtc, + &tegra_timer, &tegra_i2s1, &tegra_i2s2, &tegra_spdif_out, diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c index 5cd502c..e9de5df 100644 --- a/arch/arm/mach-tegra/tegra30_clocks.c +++ b/arch/arm/mach-tegra/tegra30_clocks.c @@ -1199,7 +1199,7 @@ static long tegra30_pll_round_rate(struct clk_hw *hw, unsigned long rate, { struct clk_tegra *c = to_clk_tegra(hw); unsigned long input_rate = *prate; - unsigned long output_rate = *prate; + u64 output_rate = *prate; const struct clk_pll_freq_table *sel; struct clk_pll_freq_table cfg; int mul; diff --git a/arch/arm/mach-tegra/tegra30_clocks_data.c b/arch/arm/mach-tegra/tegra30_clocks_data.c index d92cb55..3d2e553 100644 --- a/arch/arm/mach-tegra/tegra30_clocks_data.c +++ b/arch/arm/mach-tegra/tegra30_clocks_data.c @@ -1143,6 +1143,7 @@ struct clk *tegra_list_clks[] = { &tegra_apbdma, &tegra_rtc, &tegra_kbc, + &tegra_timer, &tegra_kfuse, &tegra_fuse, &tegra_fuse_burn, diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c index eccdce9..d3b8c8e 100644 --- a/arch/arm/mach-tegra/timer.c +++ b/arch/arm/mach-tegra/timer.c @@ -245,7 +245,7 @@ static void __init tegra_init_timer(void) register_persistent_clock(NULL, tegra_read_persistent_clock); } -struct sys_timer tegra_timer = { +struct sys_timer tegra_sys_timer = { .init = tegra_init_timer, }; diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 2236cbd..1f3fbc2 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -16,6 +16,7 @@ #include <linux/stat.h> #include <linux/of.h> #include <linux/of_irq.h> +#include <linux/irq.h> #include <linux/platform_data/clk-ux500.h> #include <asm/hardware/gic.h> diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index b9f60eb..b820eda 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -745,7 +745,7 @@ do_alignment_t32_to_handler(unsigned long *pinstr, struct pt_regs *regs, static int do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { - union offset_union offset; + union offset_union uninitialized_var(offset); unsigned long instr = 0, instrptr; int (*handler)(unsigned long addr, unsigned long instr, struct pt_regs *regs); unsigned int type; @@ -856,8 +856,10 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (thumb2_32b) { offset.un = 0; handler = do_alignment_t32_to_handler(&instr, regs, &offset); - } else + } else { + offset.un = 0; handler = do_alignment_ldmstm; + } break; default: diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 477a2d2..58bc3e4 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -610,7 +610,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, pgprot_t prot, bool is_coherent, const void *caller) { u64 mask = get_coherent_dma_mask(dev); - struct page *page; + struct page *page = NULL; void *addr; #ifdef CONFIG_DMA_API_DEBUG diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h index bf312c3..0f5a5f2 100644 --- a/arch/arm/mm/vmregion.h +++ b/arch/arm/mm/vmregion.h @@ -17,7 +17,6 @@ struct arm_vmregion { struct list_head vm_list; unsigned long vm_start; unsigned long vm_end; - void *priv; int vm_active; const void *caller; }; diff --git a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c index 540d3a7..e7b920b 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c +++ b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c @@ -55,7 +55,7 @@ struct platform_device *__init imx_add_mxc_mmc( struct resource res[] = { { .start = data->iobase, - .end = data->iobase + SZ_4K - 1, + .end = data->iobase + data->iosize - 1, .flags = IORESOURCE_MEM, }, { .start = data->irq, diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 7cd56ed..82fcb20 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -26,6 +26,7 @@ config ARCH_OMAP2PLUS select CLKDEV_LOOKUP select GENERIC_IRQ_CHIP select OMAP_DM_TIMER + select PINCTRL select PROC_DEVICETREE if PROC_FS select SPARSE_IRQ select USE_OF diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index c7a4c09..5a4678e 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -16,6 +16,7 @@ #include <linux/smc91x.h> #include <mach/hardware.h> +#include "../mach-omap2/debug-devices.h" /* Many OMAP development platforms reuse the same "debug board"; these * platforms include H2, H3, H4, and Perseus2. diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index f4a4cd0..1957a85 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -40,10 +40,10 @@ #define OMAP_UART_WER_MOD_WKUP 0X7F /* Enable XON/XOFF flow control on output */ -#define OMAP_UART_SW_TX 0x8 +#define OMAP_UART_SW_TX 0x04 /* Enable XON/XOFF flow control on input */ -#define OMAP_UART_SW_RX 0x2 +#define OMAP_UART_SW_RX 0x04 #define OMAP_UART_SYSC_RESET 0X07 #define OMAP_UART_TCR_TRIG 0X0F diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index b3349f7..1db0294 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -443,6 +443,11 @@ struct omap_hwmod_omap4_prcm { * in order to complete the reset. Optional clocks will be disabled * again after the reset. * HWMOD_16BIT_REG: Module has 16bit registers + * HWMOD_EXT_OPT_MAIN_CLK: The only main functional clock source for + * this IP block comes from an off-chip source and is not always + * enabled. This prevents the hwmod code from being able to + * enable and reset the IP block early. XXX Eventually it should + * be possible to query the clock framework for this information. */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) @@ -453,6 +458,7 @@ struct omap_hwmod_omap4_prcm { #define HWMOD_NO_IDLEST (1 << 6) #define HWMOD_CONTROL_OPT_CLKS_IN_RESET (1 << 7) #define HWMOD_16BIT_REG (1 << 8) +#define HWMOD_EXT_OPT_MAIN_CLK (1 << 9) /* * omap_hwmod._int_flags definitions diff --git a/arch/arm/plat-samsung/include/plat/spi-core.h b/arch/arm/plat-samsung/include/plat/spi-core.h new file mode 100644 index 0000000..0b9428a --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/spi-core.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __PLAT_S3C_SPI_CORE_H +#define __PLAT_S3C_SPI_CORE_H + +/* These functions are only for use with the core support code, such as + * the cpu specific initialisation code + */ + +/* re-define device name depending on support. */ +static inline void s3c64xx_spi_setname(char *name) +{ +#ifdef CONFIG_S3C64XX_DEV_SPI0 + s3c64xx_device_spi0.name = name; +#endif +#ifdef CONFIG_S3C64XX_DEV_SPI1 + s3c64xx_device_spi1.name = name; +#endif +#ifdef CONFIG_S3C64XX_DEV_SPI2 + s3c64xx_device_spi2.name = name; +#endif +} + +#endif /* __PLAT_S3C_SPI_CORE_H */ diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile index 635cb18..32d05c8 100644 --- a/arch/arm/tools/Makefile +++ b/arch/arm/tools/Makefile @@ -5,6 +5,6 @@ # include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types - @echo ' Generating $@' + @$(kecho) ' Generating $@' @mkdir -p $(dir $@) $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index c834b32..3b44e0d 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -701,11 +701,14 @@ static int __init vfp_init(void) elf_hwcap |= HWCAP_VFPv3; /* - * Check for VFPv3 D16. CPUs in this configuration - * only have 16 x 64bit registers. + * Check for VFPv3 D16 and VFPv4 D16. CPUs in + * this configuration only have 16 x 64bit + * registers. */ if (((fmrx(MVFR0) & MVFR0_A_SIMD_MASK)) == 1) - elf_hwcap |= HWCAP_VFPv3D16; + elf_hwcap |= HWCAP_VFPv3D16; /* also v4-D16 */ + else + elf_hwcap |= HWCAP_VFPD32; } #endif /* diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 59bcb96..f576092 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -166,3 +166,14 @@ void free_xenballooned_pages(int nr_pages, struct page **pages) *pages = NULL; } EXPORT_SYMBOL_GPL(free_xenballooned_pages); + +/* In the hypervisor.S file. */ +EXPORT_SYMBOL_GPL(HYPERVISOR_event_channel_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_grant_table_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_xen_version); +EXPORT_SYMBOL_GPL(HYPERVISOR_console_io); +EXPORT_SYMBOL_GPL(HYPERVISOR_sched_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_hvm_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_memory_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_physdev_op); +EXPORT_SYMBOL_GPL(privcmd_call); diff --git a/arch/arm/xen/grant-table.c b/arch/arm/xen/grant-table.c index dbd1330..859a9bb 100644 --- a/arch/arm/xen/grant-table.c +++ b/arch/arm/xen/grant-table.c @@ -33,7 +33,7 @@ #include <xen/page.h> #include <xen/grant_table.h> -int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes, +int arch_gnttab_map_shared(xen_pfn_t *frames, unsigned long nr_gframes, unsigned long max_nr_gframes, void **__shared) { diff --git a/arch/arm/xen/hypercall.S b/arch/arm/xen/hypercall.S index 074f5ed..71f7239 100644 --- a/arch/arm/xen/hypercall.S +++ b/arch/arm/xen/hypercall.S @@ -48,20 +48,16 @@ #include <linux/linkage.h> #include <asm/assembler.h> +#include <asm/opcodes-virt.h> #include <xen/interface/xen.h> -/* HVC 0xEA1 */ -#ifdef CONFIG_THUMB2_KERNEL -#define xen_hvc .word 0xf7e08ea1 -#else -#define xen_hvc .word 0xe140ea71 -#endif +#define XEN_IMM 0xEA1 #define HYPERCALL_SIMPLE(hypercall) \ ENTRY(HYPERVISOR_##hypercall) \ mov r12, #__HYPERVISOR_##hypercall; \ - xen_hvc; \ + __HVC(XEN_IMM); \ mov pc, lr; \ ENDPROC(HYPERVISOR_##hypercall) @@ -76,7 +72,7 @@ ENTRY(HYPERVISOR_##hypercall) \ stmdb sp!, {r4} \ ldr r4, [sp, #4] \ mov r12, #__HYPERVISOR_##hypercall; \ - xen_hvc \ + __HVC(XEN_IMM); \ ldm sp!, {r4} \ mov pc, lr \ ENDPROC(HYPERVISOR_##hypercall) @@ -100,7 +96,7 @@ ENTRY(privcmd_call) mov r2, r3 ldr r3, [sp, #8] ldr r4, [sp, #4] - xen_hvc + __HVC(XEN_IMM) ldm sp!, {r4} mov pc, lr ENDPROC(privcmd_call); |
