diff options
Diffstat (limited to 'arch/arm')
38 files changed, 496 insertions, 143 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9c4caa6..ca2e1b4 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1284,6 +1284,20 @@ config ARM_ERRATA_364296 processor into full low interrupt latency mode. ARM11MPCore is not affected. +config ARM_ERRATA_764369 + bool "ARM errata: Data cache line maintenance operation by MVA may not succeed" + depends on CPU_V7 && SMP + help + This option enables the workaround for erratum 764369 + affecting Cortex-A9 MPCore with two or more processors (all + current revisions). Under certain timing circumstances, a data + cache line maintenance operation by MVA targeting an Inner + Shareable memory region may fail to proceed up to either the + Point of Coherency or to the Point of Unification of the + system. This workaround adds a DSB instruction before the + relevant cache maintenance functions and sets a specific bit + in the diagnostic control register of the SCU. + endmenu source "arch/arm/common/Kconfig" @@ -1394,6 +1408,31 @@ config SMP_ON_UP If you don't know what to do here, say Y. +config ARM_CPU_TOPOLOGY + bool "Support cpu topology definition" + depends on SMP && CPU_V7 + default y + help + Support ARM cpu topology definition. The MPIDR register defines + affinity between processors which is then used to describe the cpu + topology of an ARM System. + +config SCHED_MC + bool "Multi-core scheduler support" + depends on ARM_CPU_TOPOLOGY + help + Multi-core scheduler support improves the CPU scheduler's decision + making when dealing with multi-core CPU chips at a cost of slightly + increased overhead in some places. If unsure say N here. + +config SCHED_SMT + bool "SMT scheduler support" + depends on ARM_CPU_TOPOLOGY + help + Improves the CPU scheduler's decision making when dealing with + MultiThreading at a cost of slightly increased overhead in some + places. If unsure say N here. + config HAVE_ARM_SCU bool help diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index be3a0f7..0887801 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -65,13 +65,71 @@ config DEBUG_USER # These options are only for real kernel hackers who want to get their hands dirty. config DEBUG_LL - bool "Kernel low-level debugging functions" + bool "Kernel low-level debugging functions (read help!)" depends on DEBUG_KERNEL help Say Y here to include definitions of printascii, printch, printhex in the kernel. This is helpful if you are debugging code that executes before the console is initialized. + Note that selecting this option will limit the kernel to a single + UART definition, as specified below. Attempting to boot the kernel + image on a different platform *will not work*, so this option should + not be enabled for kernels that are intended to be portable. + +choice + prompt "Kernel low-level debugging port" + depends on DEBUG_LL + + config DEBUG_LL_UART_NONE + bool "No low-level debugging UART" + help + Say Y here if your platform doesn't provide a UART option + below. This relies on your platform choosing the right UART + definition internally in order for low-level debugging to + work. + + config DEBUG_ICEDCC + bool "Kernel low-level debugging via EmbeddedICE DCC channel" + help + Say Y here if you want the debug print routines to direct + their output to the EmbeddedICE macrocell's DCC channel using + co-processor 14. This is known to work on the ARM9 style ICE + channel and on the XScale with the PEEDI. + + Note that the system will appear to hang during boot if there + is nothing connected to read from the DCC. + + config DEBUG_FOOTBRIDGE_COM1 + bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the 8250 at PCI COM1. + + config DEBUG_DC21285_PORT + bool "Kernel low-level debugging messages via footbridge serial port" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the serial port in the DC21285 (Footbridge). + + config DEBUG_CLPS711X_UART1 + bool "Kernel low-level debugging messages via UART1" + depends on ARCH_CLPS711X + help + Say Y here if you want the debug print routines to direct + their output to the first serial port on these devices. + + config DEBUG_CLPS711X_UART2 + bool "Kernel low-level debugging messages via UART2" + depends on ARCH_CLPS711X + help + Say Y here if you want the debug print routines to direct + their output to the second serial port on these devices. + +endchoice + config EARLY_PRINTK bool "Early printk" depends on DEBUG_LL @@ -80,18 +138,6 @@ config EARLY_PRINTK kernel low-level debugging functions. Add earlyprintk to your kernel parameters to enable this console. -config DEBUG_ICEDCC - bool "Kernel low-level debugging via EmbeddedICE DCC channel" - depends on DEBUG_LL - help - Say Y here if you want the debug print routines to direct their - output to the EmbeddedICE macrocell's DCC channel using - co-processor 14. This is known to work on the ARM9 style ICE - channel and on the XScale with the PEEDI. - - It does include a timeout to ensure that the system does not - totally freeze when there is nothing connected to read. - config OC_ETM bool "On-chip ETM and ETB" select ARM_AMBA @@ -100,23 +146,6 @@ config OC_ETM buffer driver that will allow you to collect traces of the kernel code. -config DEBUG_DC21285_PORT - bool "Kernel low-level debugging messages via footbridge serial port" - depends on DEBUG_LL && FOOTBRIDGE - help - Say Y here if you want the debug print routines to direct their - output to the serial port in the DC21285 (Footbridge). Saying N - will cause the debug messages to appear on the first 16550 - serial port. - -config DEBUG_CLPS711X_UART2 - bool "Kernel low-level debugging messages via UART2" - depends on DEBUG_LL && ARCH_CLPS711X - help - Say Y here if you want the debug print routines to direct their - output to the second serial port on these devices. Saying N will - cause the debug messages to appear on the first serial port. - config DEBUG_S3C_UART depends on PLAT_SAMSUNG int "S3C UART to use for low-level debug" diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts index 4c05334..e581866 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -57,14 +57,14 @@ }; sdhci@c8000200 { - gpios = <&gpio 69 0>, /* cd, gpio PI5 */ - <&gpio 57 0>, /* wp, gpio PH1 */ - <&gpio 155 0>; /* power, gpio PT3 */ + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 155 0>; /* gpio PT3 */ }; sdhci@c8000600 { - gpios = <&gpio 58 0>, /* cd, gpio PH2 */ - <&gpio 59 0>, /* wp, gpio PH3 */ - <&gpio 70 0>; /* power, gpio PI6 */ + cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ }; }; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts index 1940cae..64cedca 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -21,8 +21,8 @@ }; sdhci@c8000400 { - gpios = <&gpio 69 0>, /* cd, gpio PI5 */ - <&gpio 57 0>, /* wp, gpio PH1 */ - <&gpio 70 0>; /* power, gpio PI6 */ + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ }; }; diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 734db99..8b5be72 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -181,7 +181,7 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, return -EINVAL; mask = 0xff << shift; - bit = 1 << (cpu + shift); + bit = 1 << (cpu_logical_map(cpu) + shift); spin_lock(&irq_controller_lock); val = readl_relaxed(reg) & ~mask; @@ -260,9 +260,15 @@ static void __init gic_dist_init(struct gic_chip_data *gic, unsigned int irq_start) { unsigned int gic_irqs, irq_limit, i; + u32 cpumask; void __iomem *base = gic->dist_base; - u32 cpumask = 1 << smp_processor_id(); + u32 cpu = 0; +#ifdef CONFIG_SMP + cpu = cpu_logical_map(smp_processor_id()); +#endif + + cpumask = 1 << cpu; cpumask |= cpumask << 8; cpumask |= cpumask << 16; @@ -570,7 +576,12 @@ void __cpuinit gic_enable_ppi(unsigned int irq) #ifdef CONFIG_SMP void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) { - unsigned long map = *cpus_addr(*mask); + int cpu; + unsigned long map = 0; + + /* Convert our logical CPU mask into a physical one. */ + for_each_cpu(cpu, mask) + map |= 1 << cpu_logical_map(cpu); /* * Ensure that stores to Normal memory are visible to the diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index cd4458f..cb47d28 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -8,6 +8,7 @@ #define CPUID_CACHETYPE 1 #define CPUID_TCM 2 #define CPUID_TLBTYPE 3 +#define CPUID_MPIDR 5 #define CPUID_EXT_PFR0 "c1, 0" #define CPUID_EXT_PFR1 "c1, 1" @@ -70,6 +71,11 @@ static inline unsigned int __attribute_const__ read_cpuid_tcmstatus(void) return read_cpuid(CPUID_TCM); } +static inline unsigned int __attribute_const__ read_cpuid_mpidr(void) +{ + return read_cpuid(CPUID_MPIDR); +} + /* * Intel's XScale3 core supports some v6 features (supersections, L2) * but advertises itself as v5 as it does not support the v6 ISA. For diff --git a/arch/arm/include/asm/exception.h b/arch/arm/include/asm/exception.h new file mode 100644 index 0000000..5abaf5b --- /dev/null +++ b/arch/arm/include/asm/exception.h @@ -0,0 +1,19 @@ +/* + * Annotations for marking C functions as exception handlers. + * + * These should only be used for C functions that are called from the low + * level exception entry code and not any intervening C code. + */ +#ifndef __ASM_ARM_EXCEPTION_H +#define __ASM_ARM_EXCEPTION_H + +#include <linux/ftrace.h> + +#define __exception __attribute__((section(".exception.text"))) +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +#define __exception_irq_entry __irq_entry +#else +#define __exception_irq_entry __exception +#endif + +#endif /* __ASM_ARM_EXCEPTION_H */ diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 8c73900..253cc86 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -25,17 +25,17 @@ #ifdef CONFIG_SMP -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ +#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ smp_mb(); \ __asm__ __volatile__( \ - "1: ldrex %1, [%2]\n" \ + "1: ldrex %1, [%3]\n" \ " " insn "\n" \ - "2: strex %1, %0, [%2]\n" \ - " teq %1, #0\n" \ + "2: strex %2, %0, [%3]\n" \ + " teq %2, #0\n" \ " bne 1b\n" \ " mov %0, #0\n" \ - __futex_atomic_ex_table("%4") \ - : "=&r" (ret), "=&r" (oldval) \ + __futex_atomic_ex_table("%5") \ + : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") @@ -73,14 +73,14 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, #include <linux/preempt.h> #include <asm/domain.h> -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ +#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ __asm__ __volatile__( \ - "1: " T(ldr) " %1, [%2]\n" \ + "1: " T(ldr) " %1, [%3]\n" \ " " insn "\n" \ - "2: " T(str) " %0, [%2]\n" \ + "2: " T(str) " %0, [%3]\n" \ " mov %0, #0\n" \ - __futex_atomic_ex_table("%4") \ - : "=&r" (ret), "=&r" (oldval) \ + __futex_atomic_ex_table("%5") \ + : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") @@ -117,7 +117,7 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) int cmp = (encoded_op >> 24) & 15; int oparg = (encoded_op << 8) >> 20; int cmparg = (encoded_op << 20) >> 20; - int oldval = 0, ret; + int oldval = 0, ret, tmp; if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) oparg = 1 << oparg; @@ -129,19 +129,19 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) switch (op) { case FUTEX_OP_SET: - __futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("mov %0, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_ADD: - __futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("add %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_OR: - __futex_atomic_op("orr %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("orr %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_ANDN: - __futex_atomic_op("and %0, %1, %3", ret, oldval, uaddr, ~oparg); + __futex_atomic_op("and %0, %1, %4", ret, oldval, tmp, uaddr, ~oparg); break; case FUTEX_OP_XOR: - __futex_atomic_op("eor %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("eor %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; default: ret = -ENOSYS; diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h index 080d74f..3306f28 100644 --- a/arch/arm/include/asm/localtimer.h +++ b/arch/arm/include/asm/localtimer.h @@ -22,6 +22,10 @@ void percpu_timer_setup(void); */ asmlinkage void do_local_timer(struct pt_regs *); +/* + * Called from C code + */ +void handle_local_timer(struct pt_regs *); #ifdef CONFIG_LOCAL_TIMERS diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index e42d96a..0a17b62 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -33,6 +33,11 @@ extern void show_ipi_list(struct seq_file *, int); asmlinkage void do_IPI(int ipinr, struct pt_regs *regs); /* + * Called from C code, this handles an IPI. + */ +void handle_IPI(int ipinr, struct pt_regs *regs); + +/* * Setup the set of possible CPUs (via set_cpu_possible) */ extern void smp_init_cpus(void); @@ -66,6 +71,12 @@ extern void platform_secondary_init(unsigned int cpu); extern void platform_smp_prepare_cpus(unsigned int); /* + * Logical CPU mapping. + */ +extern int __cpu_logical_map[NR_CPUS]; +#define cpu_logical_map(cpu) __cpu_logical_map[cpu] + +/* * Initial data for bringing up a secondary CPU. */ struct secondary_data { diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 832888d..ed6b049 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -62,13 +62,6 @@ #include <asm/outercache.h> -#define __exception __attribute__((section(".exception.text"))) -#ifdef CONFIG_FUNCTION_GRAPH_TRACER -#define __exception_irq_entry __irq_entry -#else -#define __exception_irq_entry __exception -#endif - struct thread_info; struct task_struct; diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h index accbd7c..a7e457e 100644 --- a/arch/arm/include/asm/topology.h +++ b/arch/arm/include/asm/topology.h @@ -1,6 +1,39 @@ #ifndef _ASM_ARM_TOPOLOGY_H #define _ASM_ARM_TOPOLOGY_H +#ifdef CONFIG_ARM_CPU_TOPOLOGY + +#include <linux/cpumask.h> + +struct cputopo_arm { + int thread_id; + int core_id; + int socket_id; + cpumask_t thread_sibling; + cpumask_t core_sibling; +}; + +extern struct cputopo_arm cpu_topology[NR_CPUS]; + +#define topology_physical_package_id(cpu) (cpu_topology[cpu].socket_id) +#define topology_core_id(cpu) (cpu_topology[cpu].core_id) +#define topology_core_cpumask(cpu) (&cpu_topology[cpu].core_sibling) +#define topology_thread_cpumask(cpu) (&cpu_topology[cpu].thread_sibling) + +#define mc_capable() (cpu_topology[0].socket_id != -1) +#define smt_capable() (cpu_topology[0].thread_id != -1) + +void init_cpu_topology(void); +void store_cpu_topology(unsigned int cpuid); +const struct cpumask *cpu_coregroup_mask(unsigned int cpu); + +#else + +static inline void init_cpu_topology(void) { } +static inline void store_cpu_topology(unsigned int cpuid) { } + +#endif + #include <asm-generic/topology.h> #endif /* _ASM_ARM_TOPOLOGY_H */ diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 2c04ed5..c60a294 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -478,8 +478,8 @@ /* * Unimplemented (or alternatively implemented) syscalls */ -#define __IGNORE_fadvise64_64 1 -#define __IGNORE_migrate_pages 1 +#define __IGNORE_fadvise64_64 +#define __IGNORE_migrate_pages #endif /* __KERNEL__ */ #endif /* __ASM_ARM_UNISTD_H */ diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 8fa83f5..7cac26c 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -73,6 +73,7 @@ obj-$(CONFIG_IWMMXT) += iwmmxt.o obj-$(CONFIG_CPU_HAS_PMU) += pmu.o obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt +obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o ifneq ($(CONFIG_ARCH_EBSA110),y) obj-y += io.o diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index de3dcab8..53919b2 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -35,8 +35,8 @@ #include <linux/list.h> #include <linux/kallsyms.h> #include <linux/proc_fs.h> -#include <linux/ftrace.h> +#include <asm/exception.h> #include <asm/system.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index d88ff02..35417d0 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -16,7 +16,6 @@ #include <linux/cache.h> #include <linux/profile.h> #include <linux/errno.h> -#include <linux/ftrace.h> #include <linux/mm.h> #include <linux/err.h> #include <linux/cpu.h> @@ -31,6 +30,8 @@ #include <asm/cacheflush.h> #include <asm/cpu.h> #include <asm/cputype.h> +#include <asm/exception.h> +#include <asm/topology.h> #include <asm/mmu_context.h> #include <asm/pgtable.h> #include <asm/pgalloc.h> @@ -39,6 +40,7 @@ #include <asm/tlbflush.h> #include <asm/ptrace.h> #include <asm/localtimer.h> +#include <asm/smp_plat.h> /* * as from 2.5, kernels no longer have an init_tasks structure @@ -259,6 +261,20 @@ void __ref cpu_die(void) } #endif /* CONFIG_HOTPLUG_CPU */ +int __cpu_logical_map[NR_CPUS]; + +void __init smp_setup_processor_id(void) +{ + int i; + u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0; + + cpu_logical_map(0) = cpu; + for (i = 1; i < NR_CPUS; ++i) + cpu_logical_map(i) = i == cpu ? 0 : i; + + printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu); +} + /* * Called by both boot and secondaries to move global data into * per-processor storage. @@ -268,6 +284,8 @@ static void __cpuinit smp_store_cpu_info(unsigned int cpuid) struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid); cpu_info->loops_per_jiffy = loops_per_jiffy; + + store_cpu_topology(cpuid); } /* @@ -358,6 +376,8 @@ void __init smp_prepare_cpus(unsigned int max_cpus) { unsigned int ncores = num_possible_cpus(); + init_cpu_topology(); + smp_store_cpu_info(smp_processor_id()); /* @@ -460,6 +480,11 @@ static void ipi_timer(void) #ifdef CONFIG_LOCAL_TIMERS asmlinkage void __exception_irq_entry do_local_timer(struct pt_regs *regs) { + handle_local_timer(regs); +} + +void handle_local_timer(struct pt_regs *regs) +{ struct pt_regs *old_regs = set_irq_regs(regs); int cpu = smp_processor_id(); @@ -567,6 +592,11 @@ static void ipi_cpu_stop(unsigned int cpu) */ asmlinkage void __exception_irq_entry do_IPI(int ipinr, struct pt_regs *regs) { + handle_IPI(ipinr, regs); +} + +void handle_IPI(int ipinr, struct pt_regs *regs) +{ unsigned int cpu = smp_processor_id(); struct pt_regs *old_regs = set_irq_regs(regs); diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index 79ed5e7..8f5dd79 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -13,6 +13,7 @@ #include <asm/smp_scu.h> #include <asm/cacheflush.h> +#include <asm/cputype.h> #define SCU_CTRL 0x00 #define SCU_CONFIG 0x04 @@ -33,10 +34,19 @@ unsigned int __init scu_get_core_count(void __iomem *scu_base) /* * Enable the SCU */ -void __init scu_enable(void __iomem *scu_base) +void scu_enable(void __iomem *scu_base) { u32 scu_ctrl; +#ifdef CONFIG_ARM_ERRATA_764369 + /* Cortex-A9 only */ + if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) { + scu_ctrl = __raw_readl(scu_base + 0x30); + if (!(scu_ctrl & 1)) + __raw_writel(scu_ctrl | 0x1, scu_base + 0x30); + } +#endif + scu_ctrl = __raw_readl(scu_base + SCU_CTRL); /* already enabled? */ if (scu_ctrl & 1) diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c new file mode 100644 index 0000000..1040c00 --- /dev/null +++ b/arch/arm/kernel/topology.c @@ -0,0 +1,148 @@ +/* + * arch/arm/kernel/topology.c + * + * Copyright (C) 2011 Linaro Limited. + * Written by: Vincent Guittot + * + * based on arch/sh/kernel/topology.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/cpu.h> +#include <linux/cpumask.h> +#include <linux/init.h> +#include <linux/percpu.h> +#include <linux/node.h> +#include <linux/nodemask.h> +#include <linux/sched.h> + +#include <asm/cputype.h> +#include <asm/topology.h> + +#define MPIDR_SMP_BITMASK (0x3 << 30) +#define MPIDR_SMP_VALUE (0x2 << 30) + +#define MPIDR_MT_BITMASK (0x1 << 24) + +/* + * These masks reflect the current use of the affinity levels. + * The affinity level can be up to 16 bits according to ARM ARM + */ + +#define MPIDR_LEVEL0_MASK 0x3 +#define MPIDR_LEVEL0_SHIFT 0 + +#define MPIDR_LEVEL1_MASK 0xF +#define MPIDR_LEVEL1_SHIFT 8 + +#define MPIDR_LEVEL2_MASK 0xFF +#define MPIDR_LEVEL2_SHIFT 16 + +struct cputopo_arm cpu_topology[NR_CPUS]; + +const struct cpumask *cpu_coregroup_mask(unsigned int cpu) +{ + return &cpu_topology[cpu].core_sibling; +} + +/* + * store_cpu_topology is called at boot when only one cpu is running + * and with the mutex cpu_hotplug.lock locked, when several cpus have booted, + * which prevents simultaneous write access to cpu_topology array + */ +void store_cpu_topology(unsigned int cpuid) +{ + struct cputopo_arm *cpuid_topo = &cpu_topology[cpuid]; + unsigned int mpidr; + unsigned int cpu; + + /* If the cpu topology has been already set, just return */ + if (cpuid_topo->core_id != -1) + return; + + mpidr = read_cpuid_mpidr(); + + /* create cpu topology mapping */ + if ((mpidr & MPIDR_SMP_BITMASK) == MPIDR_SMP_VALUE) { + /* + * This is a multiprocessor system + * multiprocessor format & multiprocessor mode field are set + */ + + if (mpidr & MPIDR_MT_BITMASK) { + /* core performance interdependency */ + cpuid_topo->thread_id = (mpidr >> MPIDR_LEVEL0_SHIFT) + & MPIDR_LEVEL0_MASK; + cpuid_topo->core_id = (mpidr >> MPIDR_LEVEL1_SHIFT) + & MPIDR_LEVEL1_MASK; + cpuid_topo->socket_id = (mpidr >> MPIDR_LEVEL2_SHIFT) + & MPIDR_LEVEL2_MASK; + } else { + /* largely independent cores */ + cpuid_topo->thread_id = -1; + cpuid_topo->core_id = (mpidr >> MPIDR_LEVEL0_SHIFT) + & MPIDR_LEVEL0_MASK; + cpuid_topo->socket_id = (mpidr >> MPIDR_LEVEL1_SHIFT) + & MPIDR_LEVEL1_MASK; + } + } else { + /* + * This is an uniprocessor system + * we are in multiprocessor format but uniprocessor system + * or in the old uniprocessor format + */ + cpuid_topo->thread_id = -1; + cpuid_topo->core_id = 0; + cpuid_topo->socket_id = -1; + } + + /* update core and thread sibling masks */ + for_each_possible_cpu(cpu) { + struct cputopo_arm *cpu_topo = &cpu_topology[cpu]; + + if (cpuid_topo->socket_id == cpu_topo->socket_id) { + cpumask_set_cpu(cpuid, &cpu_topo->core_sibling); + if (cpu != cpuid) + cpumask_set_cpu(cpu, + &cpuid_topo->core_sibling); + + if (cpuid_topo->core_id == cpu_topo->core_id) { + cpumask_set_cpu(cpuid, + &cpu_topo->thread_sibling); + if (cpu != cpuid) + cpumask_set_cpu(cpu, + &cpuid_topo->thread_sibling); + } + } + } + smp_wmb(); + + printk(KERN_INFO "CPU%u: thread %d, cpu %d, socket %d, mpidr %x\n", + cpuid, cpu_topology[cpuid].thread_id, + cpu_topology[cpuid].core_id, + cpu_topology[cpuid].socket_id, mpidr); +} + +/* + * init_cpu_topology is called at boot when only one cpu is running + * which prevent simultaneous write access to cpu_topology array + */ +void init_cpu_topology(void) +{ + unsigned int cpu; + + /* init core mask */ + for_each_possible_cpu(cpu) { + struct cputopo_arm *cpu_topo = &(cpu_topology[cpu]); + + cpu_topo->thread_id = -1; + cpu_topo->core_id = -1; + cpu_topo->socket_id = -1; + cpumask_clear(&cpu_topo->core_sibling); + cpumask_clear(&cpu_topo->thread_sibling); + } + smp_wmb(); +} diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index bc9f9da..2103825 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -27,6 +27,7 @@ #include <linux/atomic.h> #include <asm/cacheflush.h> +#include <asm/exception.h> #include <asm/system.h> #include <asm/unistd.h> #include <asm/traps.h> diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index bf977f8..4e66f62 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -23,8 +23,10 @@ #if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK) #define ARM_EXIT_KEEP(x) x +#define ARM_EXIT_DISCARD(x) #else #define ARM_EXIT_KEEP(x) +#define ARM_EXIT_DISCARD(x) x #endif OUTPUT_ARCH(arm) @@ -39,6 +41,11 @@ jiffies = jiffies_64 + 4; SECTIONS { /* + * XXX: The linker does not define how output sections are + * assigned to input sections when there are multiple statements + * matching the same input section name. There is no documented + * order of matching. + * * unwind exit sections must be discarded before the rest of the * unwind sections get included. */ @@ -47,6 +54,9 @@ SECTIONS *(.ARM.extab.exit.text) ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text)) ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text)) + ARM_EXIT_DISCARD(EXIT_TEXT) + ARM_EXIT_DISCARD(EXIT_DATA) + EXIT_CALL #ifndef CONFIG_HOTPLUG *(.ARM.exidx.devexit.text) *(.ARM.extab.devexit.text) @@ -58,6 +68,8 @@ SECTIONS #ifndef CONFIG_SMP_ON_UP *(.alt.smp.init) #endif + *(.discard) + *(.discard.*) } #ifdef CONFIG_XIP_KERNEL @@ -279,9 +291,6 @@ SECTIONS STABS_DEBUG .comment 0 : { *(.comment) } - - /* Default discards */ - DISCARDS } /* diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 83dce85..a9e0dae 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -158,7 +158,7 @@ void __init dove_spi0_init(void) void __init dove_spi1_init(void) { - orion_spi_init(DOVE_SPI1_PHYS_BASE, get_tclk()); + orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk()); } /***************************************************************************** diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c index 1561b03..86964d2 100644 --- a/arch/arm/mach-exynos4/clock.c +++ b/arch/arm/mach-exynos4/clock.c @@ -899,8 +899,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "exynos4-fimc.0", + .name = "sclk_cam0", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 16), }, @@ -909,8 +908,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "exynos4-fimc.1", + .name = "sclk_cam1", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 20), }, @@ -1160,7 +1158,7 @@ void __init_or_cpufreq exynos4_setup_clocks(void) vpllsrc = clk_get_rate(&clk_vpllsrc.clk); vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), - __raw_readl(S5P_VPLL_CON1), pll_4650); + __raw_readl(S5P_VPLL_CON1), pll_4650c); clk_fout_apll.ops = &exynos4_fout_apll_ops; clk_fout_mpll.rate = mpll; diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c index 1ae059b..ddd8686 100644 --- a/arch/arm/mach-exynos4/mct.c +++ b/arch/arm/mach-exynos4/mct.c @@ -132,12 +132,18 @@ static cycle_t exynos4_frc_read(struct clocksource *cs) return ((cycle_t)hi << 32) | lo; } +static void exynos4_frc_resume(struct clocksource *cs) +{ + exynos4_mct_frc_start(0, 0); +} + struct clocksource mct_frc = { .name = "mct-frc", .rating = 400, .read = exynos4_frc_read, .mask = CLOCKSOURCE_MASK(64), .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .resume = exynos4_frc_resume, }; static void __init exynos4_clocksource_init(void) @@ -389,9 +395,11 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt) } /* Setup the local clock events for a CPU */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { exynos4_mct_tick_init(evt); + + return 0; } int local_timer_ack(void) diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c index 7c2282c..df6ef1b 100644 --- a/arch/arm/mach-exynos4/platsmp.c +++ b/arch/arm/mach-exynos4/platsmp.c @@ -106,6 +106,8 @@ void __cpuinit platform_secondary_init(unsigned int cpu) */ spin_lock(&boot_lock); spin_unlock(&boot_lock); + + set_cpu_online(cpu, true); } int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) diff --git a/arch/arm/mach-exynos4/setup-keypad.c b/arch/arm/mach-exynos4/setup-keypad.c index 1ee0ebf..7862bfb 100644 --- a/arch/arm/mach-exynos4/setup-keypad.c +++ b/arch/arm/mach-exynos4/setup-keypad.c @@ -19,15 +19,16 @@ void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols) if (rows > 8) { /* Set all the necessary GPX2 pins: KP_ROW[0~7] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3), + S3C_GPIO_PULL_UP); /* Set all the necessary GPX3 pins: KP_ROW[8~] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX3(0), (rows - 8), - S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX3(0), (rows - 8), + S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); } else { /* Set all the necessary GPX2 pins: KP_ROW[x] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), rows, - S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), rows, S3C_GPIO_SFN(3), + S3C_GPIO_PULL_UP); } /* Set all the necessary GPX1 pins to special-function 3: KP_COL[x] */ diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index b19ae18..a20fb3f 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -32,6 +32,7 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/mtd/physmap.h> +#include <video/vga.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -154,6 +155,7 @@ static struct map_desc ap_io_desc[] __initdata = { static void __init ap_map_io(void) { iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc)); + vga_base = PCI_MEMORY_VADDR; } #define INTEGRATOR_SC_VALID_INT 0x003fffff diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index dd56bfb..11b86e5 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -27,7 +27,6 @@ #include <linux/spinlock.h> #include <linux/init.h> #include <linux/io.h> -#include <video/vga.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -505,7 +504,6 @@ void __init pci_v3_preinit(void) pcibios_min_io = 0x6000; pcibios_min_mem = 0x00100000; - vga_base = PCI_MEMORY_VADDR; /* * Hook in our fault handler for PCI errors diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index b09e848..ca60757 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -19,6 +19,8 @@ #include <linux/io.h> #include <linux/irq.h> +#include <asm/exception.h> + #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/gpio.h> diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index a1a7176..38058af 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -128,7 +128,7 @@ static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate) unsigned long clkcon0; clkcon0 = __raw_readl(S3C2443_CLKDIV0); - clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK; + clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK; clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT; __raw_writel(clkcon0, S3C2443_CLKDIV0); } diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index dcf2d73..7b66ede 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -262,45 +262,6 @@ static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = { .cols = 8, }; -static int smdk6410_backlight_init(struct device *dev) -{ - int ret; - - ret = gpio_request(S3C64XX_GPF(15), "Backlight"); - if (ret) { - printk(KERN_ERR "failed to request GPF for PWM-OUT1\n"); - return ret; - } - - /* Configure GPIO pin with S3C64XX_GPF15_PWM_TOUT1 */ - s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2)); - - return 0; -} - -static void smdk6410_backlight_exit(struct device *dev) -{ - s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_OUTPUT); - gpio_free(S3C64XX_GPF(15)); -} - -static struct platform_pwm_backlight_data smdk6410_backlight_data = { - .pwm_id = 1, - .max_brightness = 255, - .dft_brightness = 255, - .pwm_period_ns = 78770, - .init = smdk6410_backlight_init, - .exit = smdk6410_backlight_exit, -}; - -static struct platform_device smdk6410_backlight_device = { - .name = "pwm-backlight", - .dev = { - .parent = &s3c_device_timer[1].dev, - .platform_data = &smdk6410_backlight_data, - }, -}; - static struct map_desc smdk6410_iodesc[] = {}; static struct platform_device *smdk6410_devices[] __initdata = { diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index 52a8e60..f5f8fa8 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -815,8 +815,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "s5pv210-fimc.0", + .name = "sclk_cam0", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 3), }, @@ -825,8 +824,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "s5pv210-fimc.1", + .name = "sclk_cam1", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 4), }, diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 3b24bfa..07c4bc8 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -174,6 +174,10 @@ ENTRY(v7_coherent_user_range) dcache_line_size r2, r3 sub r3, r2, #1 bic r12, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: USER( mcr p15, 0, r12, c7, c11, 1 ) @ clean D line to the point of unification add r12, r12, r2 @@ -223,6 +227,10 @@ ENTRY(v7_flush_kern_dcache_area) add r1, r0, r1 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line add r0, r0, r2 @@ -247,6 +255,10 @@ v7_dma_inv_range: sub r3, r2, #1 tst r0, r3 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line tst r1, r3 @@ -270,6 +282,10 @@ v7_dma_clean_range: dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c10, 1 @ clean D / U line add r0, r0, r2 @@ -288,6 +304,10 @@ ENTRY(v7_dma_flush_range) dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line add r0, r0, r2 diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 50be842..01f5987 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -347,6 +347,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, if (addr) *handle = pfn_to_dma(dev, page_to_pfn(page)); + else + __dma_free_buffer(page, size); return addr; } diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 3b5ea68..aa33949 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -20,6 +20,7 @@ #include <linux/highmem.h> #include <linux/perf_event.h> +#include <asm/exception.h> #include <asm/system.h> #include <asm/pgtable.h> #include <asm/tlbflush.h> diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index f71078e..f88216d 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -114,17 +114,18 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) { static int used_gpioint_groups = 0; int group = chip->group; - struct s5p_gpioint_bank *bank = NULL; + struct s5p_gpioint_bank *b, *bank = NULL; struct irq_chip_generic *gc; struct irq_chip_type *ct; if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT) return -ENOMEM; - list_for_each_entry(bank, &banks, list) { - if (group >= bank->start && - group < bank->start + bank->nr_groups) + list_for_each_entry(b, &banks, list) { + if (group >= b->start && group < b->start + b->nr_groups) { + bank = b; break; + } } if (!bank) return -EINVAL; diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 302c426..3b44519 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -64,6 +64,17 @@ static LIST_HEAD(clocks); */ DEFINE_SPINLOCK(clocks_lock); +/* Global watchdog clock used by arch_wtd_reset() callback */ +struct clk *s3c2410_wdtclk; +static int __init s3c_wdt_reset_init(void) +{ + s3c2410_wdtclk = clk_get(NULL, "watchdog"); + if (IS_ERR(s3c2410_wdtclk)) + printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); + return 0; +} +arch_initcall(s3c_wdt_reset_init); + /* enable and disable calls for use with the clk struct */ static int clk_null_enable(struct clk *clk, int enable) diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index 87d5b38..73c66d4 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -9,6 +9,9 @@ * published by the Free Software Foundation. */ +#ifndef __ASM_PLAT_CLOCK_H +#define __ASM_PLAT_CLOCK_H __FILE__ + #include <linux/spinlock.h> #include <linux/clkdev.h> @@ -121,3 +124,8 @@ extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable); extern void s3c_pwmclk_init(void); +/* Global watchdog clock used by arch_wtd_reset() callback */ + +extern struct clk *s3c2410_wdtclk; + +#endif /* __ASM_PLAT_CLOCK_H */ diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h index 54b762a..40dbb2b 100644 --- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h +++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include <plat/clock.h> #include <plat/regs-watchdog.h> #include <mach/map.h> @@ -19,17 +20,12 @@ static inline void arch_wdt_reset(void) { - struct clk *wdtclk; - printk("arch_reset: attempting watchdog reset\n"); __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ - wdtclk = clk_get(NULL, "watchdog"); - if (!IS_ERR(wdtclk)) { - clk_enable(wdtclk); - } else - printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); + if (s3c2410_wdtclk) + clk_enable(s3c2410_wdtclk); /* put initial values into count and data */ __raw_writel(0x80, S3C2410_WTCNT); |
